page 2 of 3 - kele
TRANSCRIPT
Engineering StandardsSYS_01.00
Lighting Control System Riser
Rev: 4 Type: Reference Date: 01-20-15 Job #:
Engineered: WCD
Drawn: NB
Checked:
1 of 1
1
2
3
4
5
6
1
2
3
NAMEADDR: XXLOCATION
RPDSXX-XXRIXX-00
NAMESLOT: 1LOCATION
SCUI8-00
NAMEADDR:XXLOCATION
ZCDS-00-00SCSS-00 SCDS-00 SCDS-00
SCAO8-00
CTS1RL-XXADDR: 0(TYPICAL 2)
RPSSXX-XX
ZCSS-00-00
NAMESLOT: 1LOCATION
SCSS-00
NAMEADDR: XXLOCATION
RPDSXX-XX
NAMESLOT:1LOCATION
SCSS-00 SCAO8-00
RKX-XX
NAMEIP: XXX.XXX.XX.XXLOCATION
BACnet Router
MSTP
BAS System
NAMEADDR: XXLOCATION
LEVEL-1
LEVEL-2
LEVEL-3
CTS1CH-XXADDR: 1
NAMEADDR: XXLOCATION
NAMESLOT: 2LOCATION
NAMEADDR: XXLOCATION
CTS4CH-XXADDR: 0
CTS6CH-XXADDR: 1
NAMEADDR: XXLOCATION
CTS1CH-XXADDR: 0
CTS2CH-XXADDR: 1
NAMESLOT: 2LOCATION
CTS1RL-XXADDR: 0
CTS3CH-XXADDR: 1
CTS2RL-XXADDR: 0
CTS1RL-XXADDR: 1
CTS1CH-XXADDR: 2
CTS2CH-XXADDR: 3
NAMESLOT: 1LOCATION
NAMESLOT: 2LOCATION
NAMESLOT: 3LOCATION
CTS3PR-XXADDR: 4
CTS6PR-XXADDR: 5
BACnet: CL3P 22/2 Shielded, Low Cap, Max 4,000'
Station/Satellite Network: CL3P 22/4, Max 500'
IP Network: CAT-5e, Max 328'
Lighting control system furnished by Division 25 (Controls Contractor) and installed by Division 26.
Note:
NAMEIP: XXX.XXX.XX.XXLOCATION
BACnet Router
MSTP
NAMEIP: XXX.XXX.XX.XXLOCATION
BACnet Router
MSTP
BAS NETWORK
CS1
CS1
CTS1CH-XXADDR: 2
T BACnet MS/TP Network Terminator
Station/Satellite Network TerminatorT
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
Star
T-Tap
Daisy Chain
T T T T T T
1800 Sandy Plains Industrial Parkway, Suite 216, Marietta, GA 30066 800-241-9173 www.BRTint.com
Tech Note 071014_02
Date: July 10, 2014 Product: TK-2.0 Subject: USB Cable and Driver Installation Note: Recommended USB Installation Procedure
1. Turn the Controller Board Power Switch “Off”. 2. Insert the Standard-A USB connector into a USB 2.0 port on your computer. 3. Insert the Micro-B USB connecter into the controller. 4. Turn the Controller Board Power Switch “On”.
Page 2 of 3
1800 Sandy Plains Industrial Parkway, Suite 216, Marietta, GA 30066 800-241-9173 www.BRTint.com
Recommended USB Cable Driver Installation
Computer Requirements Operating System: Windows 7 (32/64-bit) USB: Standard-A USB 2.0 port 1. Click the Start button, then right click on Computer and click Manage. 2. Under “System Tools” click Device Manager. (The cable will populate under “Other
Devices”) 3. Right click on BRT Zone Controller and click Update Driver Software.
4. Click Browse my computer for driver software.
Page 3 of 3
1800 Sandy Plains Industrial Parkway, Suite 216, Marietta, GA 30066 800-241-9173 www.BRTint.com
5. Browse for USB driver location and click Next.
6. The Blue Ridge Technologies driver package has not been digitally signed yet, click Install this driver software anyway.
7. In the Update Driver Software pop-up window, Windows has successfully updated your driver software.
Data Sheet : Catalog Page 96
Project Part Number Ref.
Tech Kit 2.0
Overview Tech Kit 2.0 (TK-2.0) includes all components for USB and Bluetooth wireless configuration of the Aperio Open Control Platform. TK-2.0 facilitates Controller Board setup, programing, firmware updates, and firmware restoration. The kit features Blue Ridge Technologies Essentials (BRT Essentials) software on a 1GB flash drive, a Bluetooth Dongle, a Bluetooth Module, a 12’(3.66m) Tech Cable (TC), a screwdriver, and a Carry Bag.
FeaturesConfigures RI, RK, RP, ZC and related Satellite/Station components:
Satellite Capacitive Touch Station (CTS)
USB and Bluetooth wireless communication Complete BRT Essentials software
Warranty Two (2) year limited manufacturer warranty from date of shipment (extended warranty optional)
Computer RequirementsOperating System: Windows 7 (32/64-bit)Java: Java 1.7 (JRE) or greaterBluetooth: Microsoft Bluetooth StackUSB: Standard-A USB 2.0 port
Flash Drive SpecificationsCapacity: 1GBContents:
BRT Essentials softwareBRT Essentials Template FilesUSB DriversSupporting Documents
Bluetooth SpecificationsDongle Connection
Hardware: Standard-A USB port on computerWireless: Supports multiple device connections
Module ConnectionHardware: Bluetooth Plug on Controller BoardWireless: PTP connection
Wireless Type: Bluetooth v2.0+EDR Class 1Wireless Range: Open air 328’ (100m)Wireless Compatibility: BRT Essentials software (API available from Blue Ridge for interface development)
Tech Cable SpecificationsType: USB 2.0Dimensions: 12’(3.66m)LComputer Connection: Standard-A USB portController Board Connection: Micro-B USB port
Accessory SpecificationsScrewdriver
Type: 0.4 x 2.5mm slot headCarry Bag
Type: Flat cloth with zipper closureDimensions: 7.25”(184mm)H x 9.50”(241mm)W
Data Sheet : Catalog Page 97
www.BRTint.com : 800-241-9173 Blue Ridge Technologies® © 2014 Blue Ridge Technologies International, LLC All Rights Reserved. TK20-DS-V14.05
Tech Kit 2.0
Part Number Description
TK-2.0 Tech Kit 2.0 (Micro-USB Cable, USB flash drive with BRT Essentials software, Bluetooth Dongle, Bluetooth Module, Screwdriver, and Carry Bag)
Ordering Information
UL924 Terminations Emergency Bypass Structure
TESTJP2
Emergency PowerDistribution Panel
Normal PowerDistribution Panel
Retrofit Interior (RI) / Relay Panel (RP)
UL924Lighting Tough Relay(LTR)
Lighting Load
EmergencyTransfer Switch
Generator
JP1
LED 1
24VDC OUT24VAC
123
Fact
ory
Wire
d fo
r Nor
mal
Pow
er
ConfigurationJumper
Test Jumper
RI / RP Transformer
Power LED
*User installed option. 24VD
C(+)
Nor
mal
Pow
er In
dica
tor L
amp*
24VD
C(-)
Norm
al P
ower
Indi
cato
r Lam
p*
Normal (Utility) Power
LTR Terminations
Demo Kit Features
Line In
Relay Output
Wire Strip Length IndicatorManual Override Lever
Phillips / Slot / Square Head Screw TerminalsMounting Hole
G
Controller Board Terminations (RI / RK / RP)
J1
Bluetooth
Micro-B USB PlugStandard-A USB Plug
Bluetooth Module
Controller Board Terminations (ZC)
Micro-B USB Plug
Bluetooth Module
Standard-A USB Plug
BAC
net (
+) O
utBA
Cne
t (-)
Out
Shie
ld O
ut
BAC
net (
+) In
BAC
net (
-) In
Shie
ld In
120VAC 8’(2.44m) Power Cord NEMA 5-15 Plug
Occupancy Sensor Simulator
Light Sensor Simulator
Line Voltage Switch (Standard Rocker Switch) Capacitive Touch Station (CTS)
LED Lamps
Power Switch
Power LED / Run LED
Micro-B USB Port
Bluetooth Plug
Test Button
Baud Rate Dip SwitchNetwork Address Rotary Switch 10’s
Network Address Rotary Switch 1’s
LEXP Terminations
PO
WE
RIN
PU
TS 1-16
INP
UTS
17-32
NJ5
J18J19
AD
DR
ES
STO
J26 OF C
ontroller
J4
J9 J13
R
RN
BD
AC
DI Jumper25-32*
DI Jumper17-24*
Add
ress
Jum
per
Con
trolle
r Boa
rdP
ort
Power LED
GN
DD
I 32
DI 3
1D
I 30
DI 2
9D
I 28
DI 2
7D
I 26
DI 2
5
GN
DD
I 24
DI 2
3D
I 22
DI 2
1D
I 20
DI 1
9D
I 18
DI 1
7
DI 9
DI 1
0D
I 11
DI 1
2D
I 13
DI 1
4D
I 15
DI 1
6G
ND
DI 1
DI 2
DI 3
DI 4
DI 5
DI 6
DI 7
DI 8
GN
D
DI Jumper1-8*
DI Jumper9-16*
*DI Jumper Position N(Dry Contact) / R(Externally Powered)
BN
+B
N-
S BN
+B
N-
SJ5
10’s 1’sTEST
ON
OFF
PWR RUN
SW3
J5
J3
J5
J3
BT48
5 Te
rmin
ator
Plu
g
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI) Retrofit Kit (RK)
IP
BACnet MS/TP
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
Satellite
CTS (Capacitive Touch Station)
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI) Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI) Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTSField Devices LVS OCC LS
Field Devices
Zone Control (ZC)
CANbus Network
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI) Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI) Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices OCC LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI) Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
Retrofit Interior (RI) Retrofit Kit (RK)
Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Zone Control (ZC)
General Architecture
BAS Router
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Relay Panel (RP)
Retrofit Interior (RI)
Retrofit Kit (RK)
CTS
LVS
OCC
LS
Relay Panel (RP) Retrofit Interior (RI) Retrofit Kit (RK)
Satellite
CTS (Capacitive Touch Station)
General Architecture
BAS Router
Internet
Field DevicesField DevicesSatellite/Station Network Satellite/Station Network
Field DevicesSatellite/Station Network
Field DevicesSatellite/Station Network
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTS
Satellite/Station Network
Field Devices LVS OCC LS
Field Devices
Zone Control (ZC) Relay Panel (RP) Retrofit Interior (RI)
Relay Panel (RP) Retrofit Interior (RI) Retrofit Kit (RK)Zone Control (ZC)
Satellite
SC (Satellite) / CTS (Capacitive Touch Station)
General Architecture
BAS Router
Relay Panel (RP)
Internet
Field DevicesCANbus Network
Field DevicesCANbus Network
Field DevicesCANbus Network
Field DevicesCANbus Network
Retrofit Interior (RI) Retrofit Kit (RK)
IP
BACnet MS/TP
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS (Light Sensor)
CTSField Devices LVS OCC LS
Field Devices
Zone Control (ZC)
CANbus Network
JP2
JP1123
24VAC IN 24VDC OUT
- +
~~LED1
TEST
UL924 EMERGENCY BYPASSCONFIGURATION JUMPER
NO JUMPER: EMERGENCY ACTION DISABLED
1-2 JUMPED: EMERGENCY ACTION CLOSES ALL RELAYS
2-3 JUMPED: EMERGENCY ACTION OPENS ALL RELAYS
TEST JUMPER
JP2NO JUMPER:SIMULATED POWER LOSS
UL924 EMERGENCY BYPASS
POWER IN: 24VAC IN +/-10%, 30VA, 50-60 Hz, Factory
Wired for Normal Power
POWER OUT: 24VDC for Normal Power Indicator Lamp
(User Installed Option)
POWER AVAILABLE: 200mA Shared Between UI's, SN, and UL924 Auxiliary Out
UL924 RELAY CONTROL
RP16: UL924 Controls RO 1-16
RP32: UL924 Controls RO 17-32
RP48: UL924 Controls RO 33-48
RP64: UL924 Controls RO 49-64
FAC
TOR
Y W
IRED
FO
R N
OR
MA
L P
OW
ER
24
VD
C(+
) N
OR
MA
L P
OW
ER L
AM
P IN
DIC
ATO
R2
4V
DC
(-)
NO
RM
AL
PO
WER
LA
MP
IND
ICA
TOR
Engineering StandardsRPDTL_01.20
Relay Panel, UL924 Detail
Rev: 4 Type: Date: 01-20-15 Job #:
Engineered: NB
Drawn: NB
Checked:
1 of 1
RO 53
RO 51
RO 49
RO 47
RO 45
RO 43
RO 41
RO 39
RO 37
RO 35
RO 33
RO 31
RO 27
RO 25
RO 23
RO 21
RO 19
RO 17
RO 15
RO 13
RO 11
RO 09
RO 07
RO 05
RO 03
RO 01
RO 29
RO 63
RO 61
RO 59
RO 57
RO 55
RO 64
RO 62
RO 60
RO 58
RO 56
RO 54
RO 52
RO 50
RO 48
RO 46
RO 44
RO 42
RO 40
RO 38
RO 36
RO 34
RO 32
RO 30
RO 28
RO 26
RO 24
RO 22
RO 20
RO 18
RO 16
RO 14
RO 12
RO 10
RO 08
RO 06
RO 04
RO 02
RPCB
TRANSFORMER
RELAY VOLTAGE DIVIDERS(RPRVD)
LEXP(Optional)
+24VAC
-24VACOU
TIN
+24VAC
-24VAC
TO UL924
RELAY PANEL
CONTROL BOARD
BYPASS
(RPCB)
ENCLOSURE
BLK
GRN
(NORMAL)CIRCUIT BREAKER
20A MAX
LINE
GROUND
NEUTRALWHT
(EMERGENCY)CIRCUIT BREAKER
20A MAX
WHT NEUTRAL
GROUNDGRN
BLK EMERGENCY GENERATOR
EMERGENCYTRANSFER
SWITCH
LOW VOLTAGE ENTRY
EMERGENCY CB-XX
BALLAST
EMERGENCY LIGHT FIXTURE
BLK
WHTNEUTRAL
BLK
BLK
LOAD
LINE VOLTAGE ENTRY LINE VOLTAGE ENTRY
UL924 EMER.
LEXP(Optional)
LEXP(Optional)
Off On
Status Indicator & Manual Override
Relay 01Line
Load
Wire Strip Length Indicator
On Off
JP1123
JP1123
JP1123
RELAY PANEL CONTROL BOARD (RPCB)
RO 64
RO 62
RO 60
RO 58
RO 56
RO 54
RO 52
RO 50
RO 48
RO 46
RO 44
RO 42
RO 40
RO 38
RO 36
RO 34
RO 32
RO 30
RO 28
RO 26
RO 24
RO 22
RO 20
RO 18
RO 16
RO 14
RO 12
RO 10
RO 08
RO 06
RO 04
RO 02
RO 63
RO 61
RO 59
RO 57
RO 55
RO 53
RO 51
RO 49
RO 47
RO 45
RO 43
RO 41
RO 39
RO 37
RO 35
RO 33
RO 31
RO 27
RO 25
RO 23
RO 21
RO 19
RO 17
RO 15
RO 13
RO 11
RO 09
RO 07
RO 05
RO 03
RO 01
RO 29
RELAY PANEL
RELAY OUTPUTS (RO)
LOAD RATINGS: Short Circuit Current Rating 30,000A at 277 VAC
20A Tungsten at 347 VAC
20A Resistive at 347 VAC
WIRE: (2) 14-10 AWG or (1) 8AWG (Solid or Stranded Copper Wire)
UNIVERSAL INPUTS (UI)
POWER: 24 VDC, 200 mA Total All Inputs
WIRE: 18 AWG Solid or Stranded, 500' Max
30A Ballast at 347 VAC
1.5 HP at 120 VAC
DIGITAL INPUTS (DI)
POWER: 24 VDC Externally Powered or Dry Contact
WIRE: 18 AWG Solid or Stranded, 500' Max
LINE VOLTAGE ENTRY
+24VGND
SN+SN-
BN
+
SHLDBN
-
1
ON
2 3 4 5 6 7 8
SW3 10's 1'sBN-Address
Baud Rate
0 1
23
456
78
9 0 1
23
456
78
9
+24VAC
-24VACOU
TIN
+24VAC
-24VAC
PWR RUN
Bluetooth
CAN-TXCAN-RXBUSYJP2
SN Terminator
TEST
J3
J1
LEXP
RELAYS 1-32
RELAYS 33-64
+24VGND
UI-1UI-2
+24VGND
UI-3UI-4
+24VGND
UI-5UI-6
+24VGND
UI-7UI-8
+24VGND
UI-9UI-10
+24VGND
UI-11UI-12
+24VGND
UI-13UI-14
+24VGND
UI-15UI-16
+24
VG
ND
UI-
17
UI-
18
+24
VG
ND
UI -
19
UI -
20
+24
VG
ND
UI-
21
UI -
22
+24
VG
ND
UI -
23
UI -
24
+5V
GN
D
POWER SWITCH
485-TX485-RX
BT-TXBT-RX
BTOC
TERMINATION-SN
(Un-terminated)
JP2
(Terminated)
BAUD RATE SELECTION-BN
1
ON
2 3 4 5 6 7 8
SW3
9600
1
ON
2 3 4 5 6 7 8
SW3
19200
1
ON
2 3 4 5 6 7 8
SW3
38400
1
ON
2 3 4 5 6 7 8
SW3
76800
STATION/SATELLITE NETWORK-SN
TOPOLOGY: Daisy Chain Only
BACnet MS/TP NETWORK-BN
TOPOLOGY: RS-485, (Half Duplex) Daisy Chain
WIRE: CL3P 22/2 Shielded, Low Cap, 4000' Max
WIRE: CL3P 22/4 Unshielded Low Cap, 500' Max
1
ON
2 3 4 5 6 7 8
SW3
115200
TERMINATION-BN
Plug EOL Resistor into J3to Terminate BACnet
JP2
RPCB
LOW VOLTAGE ENTRYLINE VOLTAGE ENTRY
LINE VOLTAGE ENTRYLINE VOLTAGE ENTRY
TORQUE SPECIFICATIONS
RO SCREW TERMINALS: 36in-lbs
GROUND LUG: 20in-lbs
4-40 FASTENERS: 5in-lbs (Max) for RO and Relay Voltage Divider Fasteners
6-32 FASTENERS: 10in-lbs (Max) for RPCB and LEXP Fasteners
RP 08 RP 16 RP 32 RP 48 RP 64
13.00" 5.75"
14.75"
18.00" 5.75"
16.20"
18.00" 5.75" 18.00" 5.75" 18.00" 5.75"
25.00"
33.80"
42.60"
0.00"1.00"
13.76"
12
.00
"
1.0
0"
0.0
0"
0.00"1.25"
14.70"
17
.00
"
1.0
0"
0.0
0"
17
.00
"
1.0
0"
0.0
0"
0.00"1.25"
23.50"
0.00"1.25"
10.80"
32.30"
17
.00
"
1.0
0"
0.0
0"
17
.00
"
1.0
0"
0.0
0"
0.00"1.25"
19.60"
41.10"
Ø0.25"
LEXP(Optional)
LEXP(Optional)
LEXP(Optional)
GN
D
DI -
7
DI -
8
DI-
6
DI -
4
DI -
5
DI -
3
DI -
1
DI -
2
DI -
11
DI -
9
DI -
10
DI -
14
DI-
12
DI-
13
GN
D
DI -
15
DI -
16
DI -
25
DI-
27
DI -
26
DI -
28
DI -
30
DI -
29
DI -
31
GN
D
DI -
32
DI -
23
GN
D
DI -
24
DI -
20
DI -
22
DI-
21
DI -
17
DI -
19
DI -
18
RN
J13
J9
NR
J4J5
C D
J18
J19
A BAD
DR
ESSTO
J26
OF C
on
troller
POWER
DI EXPANDER (LEXP)
Engineering StandardsRPDTL_01.00
Relay Panel Details, Standard
Rev: 4 Type: Date: 01-09-14 Job #:
Engineered: NB
Drawn: NB
Checked: WCD
1 of 1
Off On
Status Indicator & Manual Override
Relay 01Line
Load
Wire Strip Length Indicator
On Off
Engineering StandardsRPSB32_01.00
Relay Panel 32 Relay, Low Voltage 2-Button Switch
Rev: 4 Type: Date: 01-20-15 Job #:
Engineered: NB
Drawn: NB
Checked:
1 of 1
Relay 01
Relay 03
Relay 05
Relay 07
Relay 09
Relay 11
Relay 13
Relay 15
Relay 02
Relay 04
Relay 06
Relay 08
Relay 10
Relay 12
Relay 14
Relay 16
FROM MSTP NETWORK CL3P 22/2 SHIELDED LOW CAP MAX 4,000' CL3P 22/2 SHIELDED LOW CAP MAX 4,000'
CL3P 18/3 MAX 500'
CL3P 18/3 MAX 500'
CL3P 18/3 MAX 500'
GROUND
NEUTRAL
CIRCUIT-XXLOW
HIGH
BLKLINECIRCUIT BREAKER
20A MAX
NEUTRAL WHT
BALLAST-2
LIGHT FIXTURE
WHT
BALLAST-1
BLK
BLK
BLK
BLK
Relay 18
Relay 20
Relay 22
Relay 24
Relay 26
Relay 28
Relay 30
Relay 32
Relay 17
Relay 19
Relay 21
Relay 23
Relay 25
Relay 27
Relay 29
Relay 31
T1
T3
T2
LV-SW2
BLK
WH
T
RED
OCCUPANCYSENSOR
BLK-GNDRED-24VDC
WHT-N.O.
BOS-315(SET TIMER TO MINIMUM)
RED
YEL
RED-24VDC
BLK-GND
YEL-SIGNAL
LIGHTSENSOR
BLK
LS24-I
SHIELD
REDBLK
SN+
+24VGND
SN-
BN
+
SHLD
BN
-
UI-1
+24VUI-2
GND
UI-4UI-3
+24V
UI-5GND
UI-6
GND+24V
UI-7
+24VUI-8
GND
UI-10UI-9
+24VGND
UI-11
+24VUI-12
GND
UI-14UI-13
+24V
UI-15GND
UI-
17
UI-
18
GN
D+2
4V
UI-
19
+24
VU
I-2
0
GN
D
UI-
22
UI-
21
+24
V
UI-
23
GN
D
UI-
24
GN
D+2
4V
GN
D+5
V
P2P1
P2P1
WH
TB
LK
+24VGND
UI-16R
ED
REDYE
L
BLK
RED
WH
T
BLK
(OUT)
(IN)
SHIELD
REDBLK
YELBLU
120V
277V
BLKBRN
WHT
GRN
BLK
WHT
CIRCUIT BREAKER 20A MAX
LINE
TO MSTP NETWORK
RPCB
Master BACnet Points List
Description Name Object Type ID
Analog Input ANALOG_INPUT_100ssxx ANALOG_VALUE 100ssxx
Digital Input DIGITAL_INPUT_100ssxx BINARY_VALUE 100ssxx
Load Status LOAD_STATUS_110ssxx BINARY_VALUE 110ssxx
Line Voltage Input LINE_VOLTAGE_INPUT_120ssxx BINARY_VALUE 120ssxx
Device nnnn_DEVICE_OBJECT_132aaa DEVICE 132aaa
Channel Status CHANNEL_STATUS_200zzcc BINARY_VALUE 200zzcc
Channel Level CHANNEL_LEVEL_201zzcc ANALOG_VALUE 201zzcc
Occupancy Timer Occupied Mode OCC_TIMER_OCC_MODE_210zzcc ANALOG_VALUE 210zzcc
Occupancy Timer Unoccupied Mode OCC_TIMER_UNOCC_MODE_211zzcc ANALOG_VALUE 211zzcc
Timer Unoccupied Mode TIMER_UNOCC_212zzcc ANALOG_VALUE 212zzcc
Timer Occupied Mode TIMER_OCC_213zzcc ANALOG_VALUE 213zzcc
Daylight Harvesting Setpoint DAY_HARVEST_SETPT_220zzcc ANALOG_VALUE 220zzcc
Run Command RUN_COMMAND_300zz00 BINARY_VALUE 300zz00
Schedule SCHEDULE_310zz00 SCHEDULE 310zz00
Occupied/Unoccupied Mode Source OCCUNOCC_MODE_SOURCE_330zzcc MULTISTATE_VALUE 330zzcc
Virtual Station On Off VS_ON_OFF_340tttb MULTISTATE_VALUE 340tttb
Virtual Station Indicator LED VS_BUTTON_INDICATOR_341tttb MULTISTATE_VALUE 341tttb
Virtual Station Level Set VS_LEVEL_SET_342tttb MULTISTATE_VALUE 342tttb
Note - BACnet Object ID and Object Name must be turned on with BRT Essentials
1 of 10
Master BACnet Points List
Product
b - Button or
Button Set zz -Zone cc - Channel ss - Slot
Station
ttt - Address
Device
aaa - Address
Device Name
nnnn - Name
Digital
Input
xx - Instance
Load Status
xx - Instance
Line Voltage
Input
xx - Instance
Analog
Input
xx - Instance
ZCSB NA 01 01 - 08 00 000 000 - 099 ZCSB 01 - 06 01 - 02 01 - 02 01 - 06
ZCSS NA 01 - 02 01 - 08 00 - 03 000 - 006 000 - 099 ZCSS 01 - 06 01 - 02 01 - 02 01 - 06
ZCDS NA 01 - 02 01 - 08 00 - 03 000 - 006 000 - 099 ZCDS 01 - 06 01 - 02 01 - 02 01 - 06
ZCDE NA 01 - 04 01 - 08 00 - 07 000 - 012 000 - 099 ZCDE 01 - 06 01 - 02 01 - 02 01 - 06
RPSB NA 01 - 64 01 - 08 00 000 000 - 099 RPSB 01 - 24 NA NA 01 - 24
RPSS NA 01 - 64 01 - 08 00 - 16 000 - 064 000 - 099 RPSS 01 - 24 NA NA 01 - 24
RPDS NA 01 - 64 01 - 08 00 - 16 000 - 064 000 - 099 RPDS 01 - 24 NA NA 01 - 24
RKUN NA 01 - 64 01 - 08 00 - 04 000 - 064 000 - 099 RKUN 01 - 24 NA NA 01 - 24
RKUS NA 01 - 64 01 - 08 00 - 04 000 - 064 000 - 099 RKUS 01 - 24 01 - 64 NA 01 - 24
SCSS NA NA NA NA NA NA NA 01 - 06 01 - 02 01 - 02 01 - 06
SCDS NA NA NA NA NA NA NA 01 - 06 01 - 02 01 - 02 01 - 06
MIO-AO08 NA NA NA NA NA NA NA NA NA NA NA
MIO-UI16 NA NA NA NA NA NA NA 01 - 16 NA NA 01 - 16
RP-FI1-C NA NA NA NA NA NA NA NA NA NA NA
RK-FI1-A NA NA NA NA NA NA NA 01 - 64 NA NA NA
LEXP32 NA NA NA NA NA NA NA 01 - 32 NA NA NA
CTS1CH 1 NA NA NA NA NA NA NA NA NA NA
CTS2CH 1 - 2 NA NA NA NA NA NA NA NA NA NA
CTS3CH 1 - 3 NA NA NA NA NA NA NA NA NA NA
CTS4CH 1 - 4 NA NA NA NA NA NA NA NA NA NA
CTS6CH 1 - 6 NA NA NA NA NA NA NA NA NA NA
CTS1RL 1 NA NA NA NA NA NA NA NA NA NA
CTS2RL 1 - 2 NA NA NA NA NA NA NA NA NA NA
CTS3PR 1 - 4 NA NA NA NA NA NA NA NA NA NA
CTS6PR 1 - 6 NA NA NA NA NA NA NA NA NA NA
2 of 10
Master BACnet Points List
Device Description Type Default Access
Object_Identifier BACnetObjectIdentifier 132aaa Read
Object_Name CharacterString nnnn_DEVICE_OBJECT_132aaa Read
Object_Type BACnetObjectType DEVICE Read
System_Status BACnetDeviceStatus Read
Vendor_Name CharacterStringBlue Ridge Technologies International,
LLCRead
Vendor_Identifier Unsigned16 132 Read
Model_Name CharacterString Read
Firmware_Revision CharacterString Read
Application_Software_Version CharacterString Read
Protocol_Version Unsigned Read
Protocol_Revision Unsigned Read
Protocol_Services_Supported BACnetServicesSupported Read
Protocol_Object_Types_Supported BACnetObjectTypesSupported Read
Object_List BACnetARRAY[N] of BACnetObjectIdentifier Read
Max_APDU_Length_Accepted Unsigned ?
Segmentation_Supported BACnetSegmentation NO_SEGMENTATION Read
Local_Time Time Read/Write
Local_Date Date Read/Write
UTC_Offset INTEGER Read/Write
Daylight_Savings_Status BOOLEAN Read/Write
APDU_Timeout Unsigned 6000 Read/Write
Number_Of_APDU_Retries Unsigned 3 Read/Write
Max_Master Unsigned (1..127) 99 Read/Write
Max_Info_Frames Unsigned 10 Read/Write
Device_Address_Binding BACnetList of BACnetAddressBinding Read
Database_Revision Unsigned Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Digital Input Description Type Default Access
Object_Identifier BACnetObjectIdentifier 100ssxx Read
Object_Name CharacterString DIGITAL_INPUT_100ssxx Read
Object_Type BACnetObjectType BINARY_VALUE Read
Present_Value Any 0 Read
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Indicates the status of a binary input,
either on or off.
BACnet device object for the controller.
3 of 10
Master BACnet Points List
Load Status Description Type Default Access
Object_Identifier BACnetObjectIdentifier 110ssxx Read
Object_Name CharacterString LOAD_STATUS_110ssxx Read
Object_Type BACnetObjectType BINARY_VALUE Read
Present_Value Any 0 Read
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Line Voltage Input Description Type Default Access
Object_Identifier BACnetObjectIdentifier 120ssxx Read
Object_Name CharacterString LINE_VOLTAGE_INPUT_120ssxx Read
Object_Type BACnetObjectType BINARY_VALUE Read
Present_Value Any 0 Read
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Channel Status Description Type Default Access
Object_Identifier BACnetObjectIdentifier 200zzcc Read
Object_Name CharacterString CHANNEL_STATUS_200zzcc Read
Object_Type BACnetObjectType BINARY_VALUE Read
Present_Value Any 0 Read
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Run Command Description Type Default Access
Object_Identifier BACnetObjectIdentifier 300zz00 Read
Object_Name CharacterString RUN_COMMAND_300zz00 Read
Object_Type BACnetObjectType BINARY_VALUE Read
Present_Value Any 1 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default BACnetBinaryPV 1 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Indicates whether a given load relay is
open or closed. On indicates the relay
is closed. Off indicates the relay is
open.
Indicates the status of a line voltage
input, either on or off.
Indicates the status of a Channel, either
lights on or lights off.
Controls mode of operation. On is
when occupants are expected present.
Off when occupants are expected not
present.
4 of 10
Master BACnet Points List
Analog Input Description Type Default Access
Object_Identifier BACnetObjectIdentifier 100ssxx Read
Object_Name CharacterString ANALOG_INPUT_100ssxx Read
Object_Type BACnetObjectType ANALOG_VALUE Read
Present_Value Any 0 Read
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Units BACnetEngineeringUnits Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Channel Level Description Type Default Access
Object_Identifier BACnetObjectIdentifier 201zzcc Read
Object_Name CharacterString CHANNEL_LEVEL_201zzcc Read
Object_Type BACnetObjectType ANALOG_VALUE Read
Present_Value Any 0 Read
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Units BACnetEngineeringUnits percent Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Occupancy Timer Occupied Mode Description Type Default Access
Object_Identifier BACnetObjectIdentifier 210zzcc Read
Object_Name CharacterString OCC_TIMER_OCC_MODE_210zzcc Read
Object_Type BACnetObjectType ANALOG_VALUE Read
Present_Value Any 30 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Units BACnetEngineeringUnits minutes Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default BACnetBinaryPV 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Indicates the status value of an analog
input. Units and range are configured
within BRT Essentials.
Timer value in minutes used to count
down time during occupied mode as
occupancy timer times out.
Indicates the lighting output level in %
for a channel.
5 of 10
Master BACnet Points List
Occupancy Timer Unoccupied Mode Description Type Default Access
Object_Identifier BACnetObjectIdentifier 211zzcc Read
Object_Name CharacterString OCC_TIMER_UNOCC_MODE_211zzcc Read
Object_Type BACnetObjectType ANALOG_VALUE Read
Present_Value Any 30 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Units BACnetEngineeringUnits minutes Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default BACnetBinaryPV 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Timer Unoccupied Mode Description Type Default Access
Object_Indentifier BACnetObjectIdentifier 212zzcc Read
Object_Name CharacterString TIMER_UNOCC_212zzcc Read
Object_Type BACnetObjectType ANALOG_VALUE Read
Present_Value Any 120 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Units BACnetEngineeringUnits minutes Read
Priority_Array BACnetPriorityArray Read
Relingquish_Default BACnetBinaryPV 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Timer Occupied Mode Description Type Default Access
Object_Indentifier BACnetObjectIdentifier 213zzcc Read
Object_Name CharacterString TIMER_OCC_213zzcc Read
Object_Type BACnetObjectType ANALOG_VALUE Read
Present_Value Any 120 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Units BACnetEngineeringUnits minutes Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default BACnetBinaryPV 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Daylight Harvesting Setpoint Description Type Default Access
Object_Identifier BACnetObjectIdentifier 220zzcc Read
Object_Name CharacterString DAY_HARVEST_SETPT_220zzcc Read
Object_Type BACnetObjectType ANALOG_VALUE Read
Present_Value Any 0 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Timer value in minutes used to count
down time during unoccupied mode as
occupancy timer times out.
Daylight harvesting setpoint in foot
candles.
Timer value in minutes used to count
down time when override is initiated by
the space occupant during Unoccupied
Mode.
Timer value in minutes used to count
down time when override is initiated by
the space occupant during Occupied
Mode.
6 of 10
Master BACnet Points List
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN TRUE Read
Units BACnetEngineeringUnits foot candles Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default BACnetBinaryPV 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Daylight harvesting setpoint in foot
candles.
7 of 10
Master BACnet Points List
Schedule Description Type Default Access
Object_Identifier BACnetObjectIdentifier 310zz00 Read
Object_Name CharacterString SCHEDULE_310zz00 Read
Object_Type BACnetObjectType SCHEDULE Read
Present_Value Any 0 Read
Effective_Period BACnetDateRange Read/Write
Weekly_Schedule BACnetARRAY[7] of BACnetDailySchedule Read/Write
Exception_Schedule BACnetARRAY[N] of BACnetSpecialEvent Read/Write
Schedule_Default Any 0 Read
List_Of_Object_Property_References BACnetLIST of BACnetDeviceObjectPropertyReference Read
Priority_For_Writing Unsigned (1..16) 16 Read
Status_Flags BACnetStatusFlags Read
Reliability BACnetReliability Read
Out_Of_Service BOOLEAN FALSE Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Occupied/Unoccupied Mode Source Description Type Default Access
Object_Identifier BACnetObjectIdentifier 330zzcc Read
Object_Name CharacterString OCCUNOCC_MODE_SOURCE_330zzcc Read
Object_Type BACnetObjectType MULTISTATE_VALUE Read
Present_Value Unsigned 1 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN FALSE Read
Number_Of_States Unsigned 3 Read
State_Text BACnetARRAY[N] of CharacterString
[1]Remote Command
[2]Local Schedule
[3]Remote with Local Schedule Fallback
Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default Unsigned 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Controls mode of operation based on
schedule. On is when occupants are
expected present. Off when occupants
are expected not present.
Determines whether the Channel's
mode is determined by Remote
Command, Schedule or Remote
Command with Schedule Fallback. In
the later instance, Fallback is initiated
when the Remote Command is not
refreshed within 2 minutes.
8 of 10
Master BACnet Points List
Virtual Station On Off Description Type Default Access
Object_Identifier BACnetObjectIdentifier 340tttb Read
Object_Name CharacterString VS_ON_OFF_340tttb Read
Object_Type BACnetObjectType MULTISTATE_VALUE Read
Present_Value Unsigned 1 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN FALSE Read
Number_Of_States Unsigned 3 Read
State_Text BACnetARRAY[N] of CharacterString
[1]Toggle
[2]On
[3]Off
Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default Unsigned 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Virtual Station Indicator LED Description Type Default Access
Object_Identifier BACnetObjectIdentifier 341tttb Read
Object_Name CharacterString VS_BUTTON_INDICATOR_341tttb Read
Object_Type BACnetObjectType MULTISTATE_VALUE Read
Present_Value Unsigned 1 Read
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN FALSE Read
Number_Of_States Unsigned 3 Read
State_Text BACnetARRAY[N] of CharacterString
[1]Off
[2]On
[3]Flash
[4]Dim
Read
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
This object provides indication as to
whether the Station Button should light
or unlight its indicator LED.
This commandable object is used to
either toggle the on/off state of the
channel, or to directly set the state to
either on or off. The purpose is to
allow the system designer to provide a
virtual on/off button from a BACnet
source other than a physical station.
9 of 10
Master BACnet Points List
Virtual Station Level Set Description Type Default Access
Object_Identifier BACnetObjectIdentifier 342tttb Read
Object_Name CharacterString VS_LEVEL_SET_342tttb Read
Object_Type BACnetObjectType MULTISTATE_VALUE Read
Present_Value Unsigned 0 Read/Write
Status_Flags BACnetStatusFlags 0 Read
Event_State BACnetEventState NORMAL Read
Out_Of_Service BOOLEAN FALSE Read
Number_Of_States Unsigned 110 Read
State_Text BACnetARRAY[N] of CharacterString
[1]1 percent
[2]2 percent
…
[100]100 percent
[101]-5 percent change
[102]-4 percent change
[103]-3 percent change
[104]-2 percent change
[105]-1 percent change
[106}+1 percent change
[107]+2 percent change
[108]+3 percent change
[109]+4 percent change
[110]+5 percent change
Read
Priority_Array BACnetPriorityArray Read
Relinquish_Default Unsigned 0 Read/Write
Property_List BACnetARRAY[N] of BACnetPropertyIdentifier Read
Note - Whether a given input is exposed as a BV or an AV is based on input
configuration.
This commandable object is used to
either set the channel light level
percentage directly, or to increment
the level up or down by a fixed
percentage. The purpose is to allow
the sytsem designer to provide
raise/lower functionality from a BACnet
source other than a physical station.
10 of 10
BACnet Protocol Implementation Conformance Statement
Page 1 of 7
Date: March 30, 2015
Vendor Name: Blue Ridge Technologies International
Product Name: Aperio
Product Model Number: ZC, RP, RK, RI
Application Software Version: NA Firmware Revision: 1.3.x BACnet Protocol Revision: 135-2010 rev. 12
Product Description:
The Aperio Controller Board is a general purpose lighting controller used across the Blue Ridge Technologies product line.
This product supports native BACnet connecting directly to the MS/TP LAN. All standard MS/TP baud rates are supported.
All B-AAC required objects are supported. The quantities of each object available are dependent upon factory configuration
since this Aperio Controller Board can be provided in products with differing lighting zone and channel capacities.
BACnet Standardized Device Profile (Annex L):
BACnet Operator Workstation (B-OWS)
BACnet Advanced Operator Workstation (B-AWS)
BACnet Operator Display (B-OD)
BACnet Building Controller (B-BC)
X BACnet Advanced Application Controller (B-AAC)
BACnet Application Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
BACnet Smart Actuator (B-SA)
List all BACnet Interoperability Building Blocks Supported (Annex K): DS-RP-B, DS-RPM-B, DS-WP-B, DS-WPM-B,
DS-COV-B, DS-COVU-B, AE-N-I-B, AE-ACK-B, AE-INFO-B, SCHED-I-B, DM-DDB-B, DM-DOB-B, DM-DCC-B,
DM-TS-B, DM-UTC-B
Segmentation Capability:
Able to transmit segmented messages Window Size
Able to receive segmented messages Window Size
Standard Object Types Supported:
Objects are not creatable nor deletable using the CreateObject or the DeleteObject services.
Object/Property Support Matrix
The following table summarizes the Object Types/Properties supported:
Property
Object Type
Device Binary
Value
Analog
Value
Multi
State
Value
Schedule
Object_Identifier X X X X X
Object_Name X X X X X
BACnet Protocol Implementation Conformance Statement
Page 2 of 7
Object_Type X X X X X
System_Status X
Vendor_Identifier X
Model_Name X
Firmware_Revision X
Application_Software_Version X
Protocol_Version X
Protocol_Revision X
Protocol_Services_Supported X
Object_Types_Supported X
Object_List X
Max_APDU_Length_Accepted X
Segmentation_Supported X
Local_Time X
Local_Date X
UTC_Offset X
Daylight_Savings_Status X
APDU_Timeout X
Number_Of_APDU_Retries X
Max_Master X
Max_Info_Frames X
Device_Address_Binding X
Database_Revision X
Configuration_Files X
Last_Restore_Time X
Backup_Failure_Timeout X
Present_Value X X X X
Status_Flags X X X X
Event_State X X X
Out_Of_Service X X X
Number_Of_States X
Priority_Array X* X* X*
Relinquish_Default X* X* X*
Units X
Date_List
Effective_Period X
Weekly_Schedule X
Execption_Schedule X
Schedule_Default X
List_Of_Object_Property_Ref X
Priority_For_Writing X
Reliability X
Out_Of_Service X
Notification_Class X X
Event_Enable X X
Acked_Transitions X X
Notify_Type X X
Event_Time_Stamps X X
Time_Delay X X
Alarm_Value X
High_Limit X
Low_Limit X
Deadband X
BACnet Protocol Implementation Conformance Statement
Page 3 of 7
Limit_Enabled X
Property_List X X X X X
* For commandable values only.
Device Object Summary
The following table summarizes the Device Object supported (see Instance Key for values of nnnn and aaa):
Instance ID Object Name
132aaa nnnn_DEVICE_OBJECT_132aaa
Binary Value Instance Summary
The following table summarizes the Binary Value Objects supported (see Instance Key for values of ss, xx, zz and cc):
Instance ID Object Name Description
Present
Value
Access
Type
100ssxx DIGITAL_INPUT_100ssxx Indicates the status of a binary input, either on or off.
R
110ssxx LOAD_STATUS_110ssxx
Indicates whether a given load relay is
open or closed. On indicates the relay
is closed. Off indicates the relay is
open.
R
120ssxx LINE_VOLTAGE_INPUT_120ssxx Indicates the status of a line voltage
input, either on or off. R
200zzcc CHANNEL_STATUS_200zzcc Indicates the status of a Channel, either
lights on or lights off. R
300zz00 RUN_COMMAND_300zz00
Controls mode of operation. On is
when occupants are expected present.
Off when occupants are expected not
present.
C
NOTE: For Present Value Access Types, R = Read-only, W = Writeable, C = Commandable. Commandable values support
priority arrays and relinquish defaults.
Analog Value Instance Summary
The following table summarizes the Analog Value Objects supported (see Instance Key for values of ss, xx, zz and cc):
Instance ID Object Name Description Units
Present
Value
Access
Type
100ssxx ANALOG_INPUT_100ssxx Indicates the status value of
an analog input. R
201zzcc CHANNEL_LEVEL_201zzcc Indicates the lighting output
level for a channel. Percent
210zzcc OCC_TIMER_OCC_MODE_210zzcc
Timer value used to count
down time during occupied
mode as occupancy timer
Minutes C
BACnet Protocol Implementation Conformance Statement
Page 4 of 7
times out.
211zzcc OCC_TIMER_UNOCC_MODE_211zzcc
Timer value used to count
down time during
unoccupied mode as
occupancy timer times out.
Minutes C
212zzcc TIMER_UNOCC_212zzcc
Timer value in minutes
used to count down time
when override is initiated
by the space occupant
during Unoccupied Mode.
Minutes C
213zzcc TIMER_OCC_213zzcc
Timer value in minutes
used to count down time
when override is initiated
by the space occupant
during Occupied Mode.
Minutes C
220zzcc DAY_HARVEST_SETPT_220zzcc Daylight harvesting
setpoint.
Foot
Candles C
NOTE: For Present Value Access Types, R = Read-only, W = Writeable, C = Commandable. Commandable values support
priority arrays and relinquish defaults.
Schedule Instance Summary
The following table summarizes the Schedule Objects supported (see Instance Key for values of zz):
Instance ID Object Name Description
Date_List
Access
Type
310zz00 SCHEDULE_310zz00 Schedules to be assigned to
lighting zones. W
NOTE: For Present Value Access Types, R = Read-only, W = Writeable, C = Commandable. Commandable values support
priority arrays and relinquish defaults.
Occupied/Unoccupied Mode Source Instance Summary
The following table summarizes the Occupied/Unoccupied Mode Sources supported (see Instance Key for values of zz and
cc):
Instance ID Object Name Description
Date_List
Access
Type
330zzcc OCCUNOCC_MODE_SOURCE_330zzcc Occupied/Unoccupied mode C
NOTE: For Present Value Access Types, R = Read-only, W = Writeable, C = Commandable. Commandable values support
priority arrays and relinquish defaults.
Virtual Station Instance Summary
The following table summarizes the Virtual Stations supported (see Instance Key for values of ttt and b):
Instance ID Object Name Description Date_List
Access
BACnet Protocol Implementation Conformance Statement
Page 5 of 7
Type
340tttb VS_ON_OFF_340tttb Virtual Station On/Off C
341tttb VS_BUTTON_INDICATOR_341tttb Virtual Station Indicator LED R
342tttb VS_LEVEL_EST_342tttb Virtual Station Level Set C
NOTE: For Present Value Access Types, R = Read-only, W = Writeable, C = Commandable. Commandable values support
priority arrays and relinquish defaults.
Instance Key
The following tables provide range of values exposed in BACnet Object IDs and Object Names by Product:
Product zz -Zone
cc -
Channel ss - Slot
Device
aaa -
Address
Device
Name
nnnn -
Name
ZCSB 01 01 - 08 00 000 - 099 ZCSB
ZCSS 01 - 02 01 - 08 00 - 03 000 - 099 ZCSS
ZCDS 01 - 02 01 - 08 00 - 03 000 - 099 ZCDS
ZCDE 01 - 04 01 - 08 00 - 07 000 - 099 ZCDE
RPSB 01 - 64 01 - 08 00 000 - 099 RPSB
RPSS 01 - 64 01 - 08 00 - 16 000 - 099 RPSS
RPDS 01 - 64 01 - 08 00 - 16 000 - 099 RPDS
RKUN 01 - 64 01 - 08 00 - 16 000 - 099 RKUN
RKUS 01 - 64 01 - 08 00 - 16 000 - 099 RKUS
Product
Digital
Input
xx -
Instance
Load
Status
xx -
Instance
Line
Voltage
Input
xx -
Instance
Analog
Input
xx -
Instance
ZCSB 01 - 06 01 - 02 01 - 02 01 - 06
ZCSS 01 - 06 01 - 02 01 - 02 01 - 06
ZCDS 01 - 06 01 - 02 01 - 02 01 - 06
ZCDE 01 - 06 01 - 02 01 - 02 01 - 06
RPSB 01 - 24 NA NA 01 - 24
RPSS 01 - 24 NA NA 01 - 24
RPDS 01 - 24 NA NA 01 - 24
RKUN 01 - 24 NA NA 01 - 24
RKUS 01 - 24 NA NA 01 - 24
SCSS 01 - 06 01 - 02 01 - 02 01 - 06
SCDS 01 - 06 01 - 02 01 - 02 01 - 06
LEXP32 01 - 32 NA NA NA
Product
b – Button
or Button
Set
CTS1CH 1
CTS2CH 1 - 2
CTS3CH 1 - 3
CTS4CH 1 - 4
BACnet Protocol Implementation Conformance Statement
Page 6 of 7
CTS6CH 1 - 6
CTS1RL 1
CTS2RL 1 - 2
CTS3PR 1 - 4
CTS6PR 1 - 6
Data Link Layer Options:
BACnet IP, (Annex J)
BACnet IP, (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ATA 878.1, 2.5 Mb. ARCNET (Clause 8) ATA 878.1, EIA-485 ARCNET (Clause 8), baud rate(s) ____________
X MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 57600, 76800, 115200
MS/TP slave (Clause 9), baud rate(s):
Point-To-Point, EIA 232 (Clause 10), baud rate(s):
Point-To-Point, modem, (Clause 10), baud rate(s):
LonTalk, (Clause 11), medium: __________
BACnet/ZigBee (ANNEX O)
Other:
Device Address Binding:
Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and certain
other devices.) Yes X No
Networking Options:
Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
Annex H, BACnet Tunneling Router over IP
BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices? Yes No
Does the BBMD support network address translation? Yes No
Network Security Options:
X Non-secure Device - is capable of operating without BACnet Network Security
Secure Device - is capable of using BACnet Network Security (NS-SD BIBB)
Multiple Application-Specific Keys:
Supports encryption (NS-ED BIBB)
Key Server (NS-KS BIBB)
Character Sets Supported:
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
X ISO 10646 (UTF-8) IBM/Microsoft DBCS ISO 8859-1
BACnet Protocol Implementation Conformance Statement
Page 7 of 7
ISO 10646 (UCS-2) ISO 10646 (UCS-4) JIS X 0208
If this product is a communication gateway, describe the types of non-BACnet equipment/networks(s) that the
gateway supports:
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________