paint booths arrestors - hardy filtration · cross draft booth. they are normally found in the...

PAINT BOOTHS ARRESTORS

INDUSTRIAL

AUTOMOTIVE

Paint Booth Arrestors AMSP-2/DUSTGUARD

Intake Air Filters AMSP-2 - Description AMSP-2 Panel Filters are designed to fit any standard

Cross Draft Booth. They are normally found in thebooth doors. AMSP-2 Filters are constructed of two synthetic layerssealed over a metal wire frame. The first layer, dry andwhite, acts as a préfiltre to remove the medium andlarge particles. The second layer, green with anadhesive, removes and retains the smaller particles

DustGuard - Description Progressive Density Panel

DustGuard Panels are designed for Cross Draft andDowndraft Booths when higher quality paint is used. Inaddition, it can be installed in low pressure HVACsystems where a higher level of filtration is requiredover an AMSP-2 filter. The use of linked panels in sideaccess systems facilitates the change out of the filters.

Construction

The DustGuard Filter is constructed of two syntheticmedia layers. The first layer of white polyester acts as aprefilter. The second stage is a dual density synthetic media withan added adhesive. The DustGuard is non-toxic and non-allergenic. The adhesive prevents the migration of thedust particles and increases its dust holding capacity.

AMSP-2/DUSTGUARDPaint Booth Arrestors

Performance

Standard dimensions PANELSNOMINAL PART NO. PART NO. CAPACITY QUANTITY

DIMENSIONS AMSP-2 DUSTGUARD CFM PER BAG14 X 20 X 1½ AMSP-2 1420 DG-1420 580 2415 X 20 X 1½ AMSP-2 1520 DG-1520 625 2416 X 20 X 1½ AMSP-2 1620 DG-1620 670 2420 X 20 X 1½ AMSP-2 2020 DG-2020 830 2412 X 24 X 1½ AMSP-2 1224 DG-1224 600 2418 X 24 X 1½ AMSP-2 1824 DG-1824 900 2420 X 24 X 1½ AMSP-2 2024 DG-2024 1000 2424 X 24 X 1½ AMSP-2 2424 DG-2424 1200 2416 X 25 X 1½ AMSP-2 1625 DG-1625 830 2420 X 25 X 1½ AMSP-2 2025 DG-2025 1050 2420 X 48 X 1½ AMSP-2 2048 DG-2048 2000 8

LINKED PANELSNOMINAL PART NO. PART NO. CAPACITY QUANTITY

DIMENSIONS AMSP-2 LINKED DUSTGUARD PER UNIT PER BAG14 X 20 X 1½ AMSP-2L 14480 DGL-14480 580 2420 X 14 X 1½ AMSP-2L 20336 DGL-20336 580 2415 X 20 X 1½ AMSP-2L 15480 DGL-15480 625 2420 X 15 X 1½ AMSP-2L 20360 DGL-20360 625 2416 X 20 X 1½ AMSP-2L 16480 DGL-16480 670 2420 X 16 X 1½ AMSP-2L 20384 DGL-20384 670 2420 X 20 X 1½ AMSP-2L 20480 DGL-20480 830 2412 X 24 X 1½ AMSP-2L 12576 DGL-12576 600 2424 X 12 X 1½ AMSP-2L 24288 DGL-24288 600 2418 X 24 X 1½ AMSP-2L 18576 DGL-18576 900 2424 X 18 X 1½ AMSP-2L 24432 DGL-24432 900 2420 X 24 X 1½ AMSP-2L 20576 DGL-20576 1000 2424 X 20 X 1½ AMSP-2L 24480 DGL-24480 1000 2424 X 24 X 1½ AMSP-2L 24576 DGL-24576 1200 2416 X 25 X 1½ AMSP-2L 16600 DGL-16600 830 2425 X 16 X 1½ AMSP-2L 25384 DGL-25384 830 2420 X 25 X 1½ AMSP-2L 20600 DGL-20600 1050 2425 X 20 X 1½ AMSP-2L 25480 DGL-25480 1050 24

Special sizes are available upon request.

RESISTANCE

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

200 300 400 500VELOCITY FPM

RES

ISTA

NC

E IN

. WG

.

DG AM2

APPLICATIONS for Paint Booths

DustGuard » Pour les systèmes de basse vélocité. » For low velocity systems. » As a prefilter for a high efficiency filter. » As a primary filter where medium efficiency is required. » Replaces fiberglass products.

Hardy Filtration Inc. reserves the right to make changes without notice.

HE / AMHE

High Efficiency Media / Panels

For paint spray booths and prep stations

Description

Structure: » Progressive structure with a denser clean air side and scrim

(inter laid), thermo bonded. Characteristics: » Special anti-migration treatment with ecologically sound dust

binder (tackifier) <R1>. » Special rotary blade cuts, no cutting powder.

Applications: » Migration proof (tackified) filter media for cross draft, downdraft

paint spray booths and prep stations.

Performance

1: A (VV): (%] Arrestance vs. dust feed at rated air speed 2: E (W): (%] Atm. dust spot efficiency vs. dust feed at rated air speed 3: p (W): [Pa] Pressure loss vs. dust feed at rated air speed 4: p (v. J: (Pa] Pressure loss vs. air speed rate

High Efficiency Media / Panels

HE / AMHE

Typical filter-values according EN 779 Weight per square units 370 g/m2

Approx. thickness 14 mm Filter class F5 Rated air speed 0.25 m/s Initial pressure loss 10 Pa Final pressure loss 450 Pa Initial dust weight arrestance 90 % Average dust weight arrestance 93 % Initial dust spot efficiency 21 % Average dust spot efficiency 48 % Dust holding capacity 400 g /m2

Temperature resistance 100(120) °C Inflammability class DIN 53438 F2/K3 Weld ability th, us, hf Marking F5 EN779 / EU5

Technical details

Standard dimensions

NOMINAL PART NO. QUANTITYDIMENSIONS AMHE PER BOX

20 X 20 AMHE-2020 2424 X 24 AMHE-2424 2420 X 25 AMHE-2025 2420 X 48 AMHE-2048 8

Bulk media is availab le for Downdraft Prep Station

PANELS

Hardy Filtration reserves the right to make changes without notice

Premium Downdraft Media / Panels MFD580 / AMMFD580

For paint spray booths and prep stations Description

Structure: » Optimal progressive structure and layers of different fiber

deniers, thermo-bonded. » Clean air side calendared and scrim (interlaid) thermally bonded.

Characteristics: » Fully impregnated with ecologically sound dust binder (tackifier),

migration proof. » Migration test class S 0 (10 microns). » Improved handling due to non-sticky surfaces, no oily hands and

equipment » Special rotary blade cuts, no cutting powder.

Applications: » Ceiling filter media for paint spray booths.

Perfomance

1: A(VV): (%] Arrestance vs. dust feed at rated air speed 2: E (W): (%] Atm. dust spot efficiency vs. dust feed at rated air speed 3: p (W): [Pa] Pressure loss vs. dust feed at rated air speed 4: p (v, J: (Pa] Pressure loss vs. air speed rate

Premium Downdraft Media / Panels MFD580 / AMMFD580

Technical details

Typical filter-values according EN 779

Weight per square units 580 g/m2

Approx. thickness 25 mm Filter class F5 Rated air speed 0.25 m/s Initial pressure loss 35 Pa Final pressure loss 450 Pa Initial dust weight arrestance 93 % Average dust weight arrestance 97 % Initial dust spot efficiency 25 % Average dust spot efficiency 59 % Dust holding capacity 340 g/m2

Temperature resistance 100(120) °C Inflammability class DIN 53438 F1/K1 Marking F5 EN779 / EU5

Standard dimensions

NOMINAL PART NO. QUANTITYDIMENSIONS AMMFD580 PER BOX

20 X 20 AMMFD580-2020 2424 X 24 AMMFD580-2424 2420 X 25 AMMFD580-2025 2420 X 48 AMMFD580-2048 8

See manufacturers listing for ceiling dimensions on your spray booth, if your booth is not on the list call your local representative.

PANELS


MAXI AIR

AIR PAK

Construction

Advantages

Medium and high efficiency pocket filters offer the best filtration for the cost. Individual pockets are assembled into a sturdy galvanized header proving rigid support for the filter. The filter element is a fully synthetic fiber, neither shedding nor affected by humidity. A wide range of sizes are available. Efficiency levels: from 40% to 95%.

Media The synthetic filtering element consists of layered and blended polypropylene melt blown fibers attached to a dense polypropylene backing. Header A ¾” header of 24 ga. galvanized steel provides the strength of the assembled filter. Pockets The opening of the individual pockets is controlled using a span stitch overlaid with a thermoplastic sealant to ensure the integrity of the pocket. Each pocket is assembled and sealed individually into the metal header. The filter is tested in accordance with the ASHRAE 52.2 fractional efficiency test method. The suggested temperature limit is 200°F. ULC Class 2.

» High dust holding capacity. » Choice of different pocket configurations and lengths depending on the air

volumes. » The pocket filters have a relatively low pressure drop and pockets can be added

to provide additional surface area to reduce the pressure drop or resistance. » The pocket filter is shipped with a retaining strap to facilitate installation.

Extend the life of your pocket filter by using a MAXI AIR pleated filter.

Description

Medium & High Efficiency Pocket Filters

PLEATED FILTERS MAXI AIRPaint Booth Arrestors

Intake Air Filters

Description

The MAXI AIR pleated air filter uses a fully synthetic media with anASHRAE 52.2 rating of MERV 8. The synthetic polypropylene media is bonded to a metal backing giving itsaerodynamic form. The media pack is enclosed and bonded at all pointsinto a heavy duty, moisture resistant, beverage board frame. The MAXI AIR filter is a very popular choice for roof top and stand aloneunits and is an ideal upgrade from panel filters that tend to face load. These filters are ideal as prefilters to increase the life of a higher efficient final filter. The pleated configuration allows filtration of particles from 3 to 10 microns such as medium airborne pollutants.

Maxi-Air

MAXI AIR MAHT SIZE QTY / BOXMA()-21620 MAHT-21620 16" X 20" X2" 12

MA()-21625 MAHT-21625 16" X 25" X2" 12

MA()-22020 MAHT-22020 20" X 20" X2" 12

MA()-22025 MAHT-22025 20" X 25" X2" 12

MA()-22424 MAHT-22424 24" X 24" X2" 12

MA()-41620 MAHT-41620 16" X 20" X 4" 6

MA()-41625 MAHT-41625 16" X 25" X 4" 6

MA()-42020 MAHT-42020 20" X 20" X 4" 6

MA()-42025 MAHT-42025 20" X 25" X 4" 6

MA()-42424 MAHT-42424 24" X 24" X 4" 6() add # 10, 15 or HT

MAHT

Available Models

MA15 MRV 11

The use of these filters will greatly enhance theefficiency of the system without any physicalchanges to the system. MAHT High temperature pleated filter employs a fiberglass media element to withstand temperaturesup to 400°F.

MA-10 MA-10 filter is designed for commercial and industrialuses requiring a longer life and lower cost. MA-15 MA-15 filter has more surface area and will have alonger life with a lower resistance with its MERV8rating.

High Efficiency Final Stage Paint Arrestor CUBAIR Description

Model CMST

The Cube filters are manufactured of high quality polyester

fibers in two layer (CMST) or three layer (CMDG) configurations. The polyester is sealed around an internal support wire andis self sealing. An integrated adhesive on the air leaving side assures no dust migration.

Characteristics

» Non-allergenic. » Integrated adhesive. » Will not support microbial growth. » Unaffected by moisture.

Model CMDG

Advantages

» Extended surface area. » Synthetic media composed of three filtration stages (CMDG). » One piece internal support wire. » Self-sealing. » Designed to fit any existing system.

Application

» Used as the final stage in a paint booth where high efficiency is required. » Can be used behind various prefilters as fiber glass, paper or ANDREAE » Arrestance is 99% and more.

CUBAIRHigh Efficiency Final Stage Paint Arrestor

Performance

Standard dimensions DIMENSIONS

H x W x DPART NO.

CMSTPART NO.

CMDGCAPACITY500 PPM

CAPACITY300 PPM

QTYBOX

20 X 20 X 12 CMST 122020 CMDG 122020 850 510 1024 X 20 X 12 CMST 122420 CMDG 122420 1000 600 1024 X 24 X 12 CMST 122424 CMDG 122424 1200 720 1020 X 25 X 12 CMST 122025 CMDG 122025 1050 650 1025 X 20 X 12 CMST 122520 CMDG 122520 1050 650 1020 X 20 X 15 CMST 152020 CMDG 152020 1050 650 812 X 24 X 15 CMST 151224 CMDG 151224 750 450 824 X 12 X 15 CMST 152412 CMDG 152412 750 450 824 X 24 X 15 CMST 152424 CMDG 152424 1500 900 825 X 20 X 15 CMST 152520 CMDG 152520 1300 780 820 X 20 X 20 CMST 202020 CMDG 202020 1400 850 612 X 24 X 20 CMST 201224 CMDG 201224 1000 600 624 X 24 X 20 CMST 202424 CMDG 202424 2000 1200 620 X 25 X 20 CMST 202025 CMDG 202025 1750 1050 6

Special sizes available upon request.

Technical information PRODUCTS VELOCITY EFFICIENCY Initial pressure

(in. Wg)Final pressure

(in. Wg.)CMST 500 PPM MERV 6 0.12 1.0CMDG 500 PPM MERV 7 0.16 1.0

Temperature limit 200°°F

RESISTANCE

0

0.05

0.1

0.15

0.2

0.25


RES

ISTA

NC

E IN

. WG

.

CMDG CMST

RESISTANCE

0

0.05

0.1

0.15

0.2

0.25


RES

ISTA

NC

E IN

. WG

.

CMDG CMST


STANDARD 3000 SERIES Part no. Dimensions Qty/Pkg

3031 20" x 25" Standard 70P/Ctn3032 20" x 20" Standard 70P/Ctn3051 6' x 45" Standard 6P/Bag3052 7' x 45" Standard 5P/Bag

Paint Booth Arrestors PAPER COLLECTORS

Overspray Collectors

Description

The element is constructed of layers of expanded paper. The progressive density of the filter allows for a high paint holding capacity. The high efficiency product incorporates a layer of polyester on the air leaving side of the filter.

3053 8' x 45" Standard 4P/Bag

High capacity 3100 SERIESPart no. Dimensions Qty/Pkg

3131 20" x 25" High Capacity 30P/Ctn3132 20" x 20" High Capacity 30P/Ctn3151 6' x 45" High Capacity 4P/Sac3152 7' x 45" High Capacity 3P/Sac3153 8' x 45" High Capacity 3P/Sac

High Efficiency 3200 SERIESPart no. Dimensions Qty/Pkg

3231 20" x 25" High Efficiency 60P/Ctn3232 20" x 20" High Efficiency 60P/Ctn3251 6 'x 45" High Efficiency 5P/Bag3252 7' x 45" High Efficiency 4P/Bag3253 8' x 45" High Efficiency 4P/Bag

High Capacity / High Efficiency 3400 SERIESPart no. Dimensions Qty/Pkg

3451 4P/Bag3452 4P/Bag3453 3P/Bag

6 'x 45" High Capacity/High Efficiency7 'x 45" High Capacity/High Efficiency8' x 45" High Capacity/High Efficiency

Standard dimensions

PaintStop Fiberglass Arrestors MSA22 PaintStop Paint Arrestors

PaintStop Paint Arrestors protect the spray booth exhaust system, as well asthe outside environment, while reducing paint booth operating costs.

PaintStop Paint Arrestors are widely used because they deliver many advantages:

» High-lofted fibers trap heavy, wet paint particles as well as dry contaminants before they go up the stack and into the fans – reducing fan maintenance and operating costs.

» They hold unparalleled amounts of solids before needing to be changed – resulting in less downtime and lower paint arrestor costs.

» They handle any of the new coatings – allowing you to stay out front of the competition.

MSA22 - Description

Down draft media of choice in North American and European markets.

MSA-22 fiberglass media is constructed using 22 grams of fiberglass media per square foot. The fibers are formedinto progressively denser layers. Fiberglass media is ideal for capturing paint overspray due to its ability to maintain an open outer layer. It is this initial outer layer that allows the entire depth of the media to hold paint particulate andnot “surface load” like many overspray collectors. The media is solid yellow and has white backing on the downstream side. Fiberglass media is ideal for shipping, the media has 100% memory when compressed, therefore the rolls are tightlywound and when unrolled to use in your booth, the filter regains its 2½” loft. MSA-22 fiberglass media comes in roll form of 300 foot lengths and various widths to accommodate most paintbooths. If your downdraft booth uses a pit, measure the width of the pit to find the appropriate roll, or check our booth guide. To change the media, simply unwind the roll to the proper length and cut.

PaintStop Fiberglass ArrestorsPaint Holding Comparison

Price per Lb of paint

1.8

$0.25$0.14

0.8

$0.17 $0.21

2.3

$1.39

$0.60

0.85

$0.33 $0.39

Paint/lbs/sq.ft. Price/sq.ft. Price vs lb of paintMSA22 MSA 14gr Paint Pocket Paper

BESTBUY

Efficiency

96. 5% 97.0% 97.5% 98.0% 98.5% 99.0% 99. 5% 100.0%

Paper

MSA 14gr

Paint Pocket

MSA22

Paper MSA 14gr Paint Pocket MSA22

As one can see from the comparisoncharts the MSA22 has the highestefficiency and although it does nothave the highest paint holdingcapacity, it is the best value for thecost of pound of paint retained.

Another very important point is the cost ofshipping. The other products on the market whetherit be paper or polyester can be very bulkyto ship. Because Fiberglass has memory it can becompressed into a very tight roll forshipping. Your savings on freight costs can be 5-7 times less than that of shipping theother products.

Comparison of the PaintStop MSA22 versus other popular floor exhaust products.

DIMENSIONS PART NO. PACKING

25" X 300' x 2 1/2 MSA22-25300 128" X 300' x 2 1/2 MSA22-28300 130" X 300' x 2 1/2 MSA22-30300 132" X 300' x 2 1/2 MSA22-32300 136" X 300' x 2 1/2 MSA22-36300 140" X 300' x 2 1/2 MSA22-40300 142" X 300' x 2 1/2 MSA22-42300 1

Description

MSA22

Standard dimensions


PaintStop Fiberglass Arrestors

PaintStop Fiberglass Arrestors

Fiber Glass Paint Arrestors

MSA Rolls / PA14 Pads - Description

MSA & PA14

DIMENSIONS PART NO. PACKING

25" X 300' x 2 1/2 MSA-25300 128" X 300' x 2 1/2 MSA-28300 130" X 300' x 2 1/2 MSA-30300 132" X 300' x 2 1/2 MSA-32300 136" X 300' x 2 1/2 MSA-36300 140" X 300' x 2 1/2 MSA-40300 142" X 300' x 2 1/2 MSA-42300 120 X 20 X 2 1/2 PA14-2020 10020 X 25 X 2 1/2 PA14-2025 100

Fiber Glass Paint Arrestors protect the spray booth exhaust system, as well as the outside environment, while reducing paint booth operating costs.

PaintStop Paint Arrestors are widely used because they deliver many advantages:

» High-lofted fibers trap heavy, wet paint particles as well as dry contaminants before they go up the stack and into the fans – reducing fan maintenance and operating costs.

» They hold unparalleled amounts of solids before needing to be changed – resulting in less downtime and lower paint arrestor costs.

MSA fiberglass media is constructed using 14 grams of fiberglass media per square foot. The fibers are formed into progressively denser layers. Fiberglass media is ideal for capturing paint overspray due to its ability to maintain an open outer layer. It is this initial outer layer that allows the entire depth of the media to hold paint particulate and not “surface load” like many overspray collectors. The media is green and has white backing on the downstream side. Fiberglass media is ideal for shipping, the media has 100% memory when compressed, therefore the rolls are tightly wound and when unrolled to use in your booth, the filter regains its 2½” loft. MSA fiberglass media comes in roll form of 300 foot lengths and various widths to accommodate most paint booths. PA14 pads are shipped in boxes containing 4-25 pad vacuum packed packages, reducing the box size for reduced shipping costs If your downdraft booth uses a pit, measure the width of the pit to find the appropriate roll, or check our booth guide. To change the media, simply unwind the roll to the proper length and cut.

Standard Dimensions :


ASHRAE Tests

MSA & PA14 PaintStop Fiberglass Arrestors

Hardy Filtration inc. reserves right to make changes without notice.

Paint Booth ANDREAE FILTERS

The best solution for paint particles (over spray) » Working principle: Separation by inertia. » Giving a holding capacity 3 to 5 times higher than most common mesh filter » The most easy to use on the market. » 270 pi² filtration surface, 36″ x 30', 1/box. » Filtration efficiencies up to 99.8% with AF913 series.

Andreae Filters Advantages:

» No face-loading. » Better airflow into Paint Booth.

» Take up less space for storage.

» Best purchase for your money

» Meet or exceed local regulations.

Filtering is not only the interception of particles in an air stream with a succession of wider to smaller meshed apertures. Andreae filters use another principle: Inertia Separation

The paint laden airflow in transit through the filter is repeatedly subjected to several radical changes of direction. Particles by their mass are then ejected out of the air flow during changes of direction.

ANDREAE FILTERSPaint Booth

Installation

Reference White

AF923 Size: 3'h x 30'w(1 per box)

*AF223 Size: 20"h x 20"w(36 per box)

*AF423 Size: 20"h x 25"w(32 per box)

Reference Std WhiteAF813 Size: 3' x 30'

(1 per box)*AF213 Size: 20"h x 20"w

(40 per box)*AF413 Size: 20"h x 25"w

(36 per box)

36" ID

88"

Vue du Côté

Rivet ou Vis Tête Ronde

Moulure du bas

Moulure du haut

ANDREAECadrage Existant

DirectionD'air 96''

72''

Espacer 8'' x 96'' En haut et bas

Moulure-8-H 2 Fois

Moulure-8-B 2 Fois

INSTALLATION TYPIQUE

INSTALLATION DES MOULURES POUR LES FILTRES ANDREAE 36''

ANDREAE

ANDREAE

DATE 12/01/06DESSIN: ANDREAE 011206

Vue du HautANDREAE

Moulure-V Fixé sur mur2 Fois

Grid

Frame

Andreae Installation

Andreae Filters

Existing frame installation Drawing for complete Paint Booth Installation with Andrea filter 36' height

Types of Paint Booth

Cross-Draft

MSA22

Semi Cross-Draft

MSA22

AMAC-2

Types of Paint Boths

Down-Draft

AMAC-2

MSA22

Semi-Down-Draft

MSA22

paint booths arrestors - hardy filtration · cross draft booth. they are normally found in the...

Documents