pakur polytechnic (established by govt. of jharkhand and ... · ex-director, bit - sindri...

251 Approval Process Handbook 2019-20

The following information shall be given in the information Brochure besides being hosted on the Institution’s official Website.

The onus of the authenticity of the information lies with the Institution ONLY and not on AICTE.

1. Name of the Institution

Pakur Polytechnic (Established by Govt. of Jharkhand and Run & Managed

by Cybobhubaneswar Educational foundation)

Address of Institution – Behind New DC Combined Building, Pakur

City-Pakur

PIN code -816107

State/UT-Jharkhand

Phone number 07484840028/29

Email [email protected]

2. Name of Trust/Society/Company- Cybobhubaneswar Educational foundation

Address- 2ndFloor, Cybotech Tower, Boring Patliputra Road,Patna-13,Bihar

Name of Trustees:-

Name Address Email Id Mobile No

Mr. Abhijit Kumar

2ndFloor, Cybotech

Tower, Boring Patliputra

Road, Patna-13,Bihar

[email protected] 9334306555

Mr. Amiya Ranjan

Badajena

Kapila Prasad Old Town

,Bhubneswar-Odisha


3. Name and Address of the Vice Chancellor/ Principal/ Director

Name Designation Address Email Id Mobile No

Mr. Abhijit

Kumar

Director 2ndFloor, Cybotech

Tower, Boring

Patliputra Road, Patna-

13,Bihar


Annexure 10

10.0 Mandatory Disclosures

mailto:[email protected]





Mr. Amiya

Ranjan

Badajena

Director Kapila Prasad Old

Town ,Bhubneswar-

Odisha


Dr. P.K. Das Principal Pakur Polytechnic,Pakur [email protected] 7484840029

4. Name of the affiliating University

JUT, Jharkhand

5. Governance

Members of the Board and their brief background

Name Designation Qualification Other Credentials

Mr. Abhijit Kumar Director BSc., PGDM (MBA), BA(LLB) Founder Member, Cybobhubaneswar Educational foundation

Mr. Amiya Ranjan Badajena Director MBA Founder Member, Cybobhubaneswar Educational foundation

Mrs. Renuka Yashaswee Member B.Sc. (From Science College, Patna), BIT, MCA MBA [HR Spec.], MTech(IT) and Pursuing Ph.D. in Management Studies

Mrs. Rajshree Baliar Singh Member Graduate

Members of Academic Advisory Body

Name Department/University

Prof. J. Jha Ex-Director, BIT - Sindri Ex-Director, BIT- Mesra

Prof. S. N. Sinha Ex-Director, MNNIT Engineering College, Allahabad Ex-Director, NIT-Jamshedpur

Shri Ravi Shankar Kumar Advocate (Supreme Court of India)

Frequently of the Board Meeting and Academic Advisory Body

Thrice a year & date of last meeting: 17 Feb 2019




Organizational chart and processes

Nature and Extent of involvement of Faculty and students in academic affairs/improvements

Principal is the chief executive of the College. He manages college activities through academic

Coordinator and different heads of departments, Registrar and Accountant. The academic function is

managed through the Heads, Lecturers. The Librarian manages library with the coordination of

HODs, staffs and accountant. The purchases of equipments and consumables are done as per budget

provisions with the help of store and accounts. At the commencement of every year/semester, an

academic planning is done in a staff meeting to decide the course of activities and policies for the term

to achieve academic improvements and excellence and ethical standards. A feedback from students

about their faculty is taken once every semester and the performance of the staff is assessed

accordingly as one of the elements of staff assessment. The Management committee reviews the

monthly activities through its meetings and gives directions about the policies and purchases for

further actions. The management decides the budget for the ensuing year. Annual general meeting of

the society is held once in year where the review of all institutes is taken and the decisions for the next

year plans are taken.

The improvement of faculty is a continuous activity where the faculty is encouraged to attend

various workshops, training programs, seminars, conferences, and in-house meetings. The faculty is

encouraged to improve their academic qualifications with sponsorship from college. Staff members

are also encouraged for writing technical papers articles in journals. Various personality development

programs are arranged in the college by inviting experts. Students are given input to improve learning

abilities, memory techniques and enhancement of reading speed. Various experts are invited for

workshops on techniques.


Mechanism/ Norms and Procedure for democratic/ good Governance

The college activities are managed through multiple group thinking on day to day issues and policies

are decided based on past experience, improvements in view and directives of JUT / AICTE or

Management. Staff contributes their views and a conscience decision is taken which is followed as

policy by all concerned. Student meetings are conducted with principal to decide the policies and

procedures for student’s activities, sports, gatherings etc. The staff meetings are held once in a month

whereas the HODs and Principal meet every week. The library works through the Library Committee

of which Principal is Post facto Chairman. One student council member represents each department

on this committee.

Student Feedback on Institutional Governance/ Faculty performance

Every semester student feedback on faculty and institution is taken. The feedback is assessed and

reviewed by Principal, HOD and concerned staff. Steps are taken to improve the situation. Follow up

is done by HODs. This feedback mechanism has helped to improve the image of the college in the

eyes of the students and parents.

Grievance Redressal mechanism for Faculty, staff and students

The grievances of the students are settled through the concerned head of the department,

staff and student along with the parent if needed. The common matters are discussed in the discipline

committee meeting and agreeable solutions are decided as policy for the college working and

presented to them managing committee for approval. Serious misdeeds are handled as per JUT act and

procedure by the management.

Establishment of Anti Ragging Committee

It is a body at institutional level to establish measures for prohibiting, preventing and banning

activities of Ragging Menace within and outside the campus in accordance with AICTE/UGC

Regulations, supreme court directives and state act, the committee is responsible for taking action

against those found guilty of ragging and or abetting ragging, actively or passively or being part of a

conspiracy to promote ragging

Anti Ragging Committee Members

1. Dr. P. K .Das

2. Mr. Lakhan Hembrom

3. Mr. Amboj Kumar Verma

4. Mr. Rajiv Pandey

5. Mr. Jaydev Kumar

6. Shankar Kumar

7. Saquib Sakil

8. Gautam Sharma

9. Karan Kumar Mishra

10. Imran Ansari

11. Satish Kumar

12. Anu Priya

Establishment of Online Grievance Redressal Mechanism


Grievance Redressal System is an online platform to receive and act on complaints reported by students of

private or public institutions, enabling prompt actions on any issue raised by them and to avail services more

effectively.

Grievance Redressal can be handled directly by institutes through their own websites. Also the smart web

portal for grievance processing connects students and action-takers directly through online platform.

Grievance System helps to pursue quick action for solving the grievance, while maintaining affordability and

ease to the users.

Establishment of Grievance Redressal Committee in the Institution and Appointment of OMBUDSMAN by the Institute

Committee Members for Grievance Redressal Committee in the Institution and Appointment of

OMBUDSMAN by the Institute as follows:

1. Dr. P. K. Das, Chair Person

2. Nikhil Chandra, Member

3. Shankar Kumar, Member

4. Anu Priya, Member

Establishment of Internal Complaint Committee (ICC)

The Pakur Polytechnic Pakur (PPP) has constituted an Internal Complaints Committee

(ICC) to provide protection against sexual harassment at the workplace. The ICC has

been constituted in accordance of the Sexual harassment of women at workplace

(prevention, prohibition and redressal) Act 2013, which replaces the earlier Committee

against sexual harassment (CASH) at PPP.

Committee Members for Establishment of Internal Complaint Committee (ICC) as follows:

1. Mrs. Renuka Yashaswee,Presiding Officer

2. Dr. P.K.Das,Member

3. Mr.Nikhil Chandra,Member

4. Anu Priya,Member

Establishment of Committee for SC/ ST

The scheduled Caste (SC) and Scheduled Tribes (ST) Cell in an institute promotes the special interest

of students in the reserved category and to provide special inputs in areas where the students

experience difficult. The cell regularly have to conduct remedial coaching classes on life skills,

personality development, writing assignments and making presentations and also have to organize

interactive sessions and informal meetings with students to attend to their personal, social and

academic problems.

A Manual has been prepared in order to guide the students to optimally utilize the benefits of the

schemes offered by the Government of India.

Committee Members for SC/ ST as follows:

1. Dr. P.K. Das

2. Mr. Nikhil Chandra

3. Mr. Satrudhan Pandey

https://www.grepixit.com/online-grievance-redressal-system.html


Internal Quality Assurance Cell

In pursuance of the National Action Plan of the National Assessment and Accreditation Council

(NAAC), Bangalore, and as well as for ISO certification for performance evaluation, assessment,

accreditation and quality up-gradation of Higher Educational Institutions (HEIs), the NAAC proposes

that every accredited institution establish an Internal Quality Assurance Cell (IQAC) as a post-

accreditation quality sustenance measure. The University Grants Commission (UGC), India has (in

the XI Plan) made a policy decision to direct all HEIs to establish IQAC.

Since quality enhancement is a continuous process, the IQAC will become a part of the institution and

work towards realizing the goals of quality enhancement and sustenance. The prime task of the IQAC

is to develop a system for conscious, consistent and catalytic improvement in the performance of

institutions. The IQAC will make a significant and meaningful contribution in the post-accreditation

phase of institutions. During the post-accreditation period, the IQAC will channelize the efforts and

measures of an institution towards academic excellence.

The IQAC is the nodal agency entrusted with the responsibility of ensuring total quality management

by ushering in innovations leading to achieving excellence and adoption of intervention strategies for

monitoring their successful implementation. Ever in quest for excellence, the IQAC functions to

assure institutional accountability with probity to all the stakeholders, funding agencies in particular

and society as a whole.

Committee Members for Internal Quality Assurance Cell as follows:Name1

1. Mr. Nikhil Chandra

2. Mr. Amit Ranjan

3. Mr. Shankar Kumar

4. Mr. Karan Kumar Mishra

5. Md. Imran Ansari

6. Mr. Saquib Shakil

7. Mr. Uttam Kumar

6. Programmes

Name of the Programmes approved by the AICTE

Sl No Name of Course Sanctioned Intake

1. Civil Engineering 60

2. Electrical Engineering 60

3. Mechanical Engineering 60

4. Metallurgical Engineering 60

5. Mining Engineering 60

For each Programme the following details are to be given:


BRANCH No of Seats

Duration Cut off Marks/Rank of admission

Fee per year

CML RANK CAT RANK

TFW Free Payment MQ

Gen/OBC ST/SC

CIVIL 60 3 years 2116 428 430 2830 1030 45000 54100

ELECTRICAL 60 3 years 3878 1290 430 2830 1030 45000 54100

MECHANICAL 60 3 years 1522 492 430 2830 1030 45000 54100

METALLURGY 60 3 years 10421 3459 430 2830 1030 45000 54100

MINING 60 3 years 1994 423 430 2830 1030 45000 54100

Placement Facilities

Training and Placement Cell is an integral part of our institution. It is not Just enough to educate

the students to make them knowledgeable, we believe, it's our responsibility to ensure that they are

put on the right path of becoming valuable citizens and diligent engineers/ managers. SSIET is

proud to have a vibrant training and placement department which has the privilege of doing this for

its students. The cell takes care of honing the minds of our students to face the competitive world

with desired skills, courage and confidence.

Our pioneering efforts have borne fruits in achieving academic-industrial rapport and we are proud

that our students are absorbed by leading and reputed giants in the industrial firmament. The

placement cell coordinates quite well with the corporate sector and provides well developed

infrastructure to facilitate the campus selection drives.

Activities

Nurturing cordial relationship with the Industries, invite them for Campus recruitment drives,

organizing technical seminars, workshops and other technical sessions.

Inviting Industry personnel periodically to enrich the knowledge base of students' community with

the latest technological innovations and industry practices.

Organizing and coordinating Campus Placement Program, to fulfill the commitment of a job to

every aspirant.

Maintaining updated database and job profile, recruitment pattern of the companies and thus helps

each student analyze and prepare.

Conducting Vocational Training/Summer Internship with renowned industries and organization.

Periodic in-house and outsourced training sessions for soft skills, aptitude and technical seminars

aiming at making the student community employable.

Mock-campus interview drives, online aptitude and technical tests to groom students.

Helping every student in defining his/her career interest through career counseling by guidance

lectures of suitable corporate representatives.

OBJECTIVES

To achieve more than 100% in terms of placements.

To expose the students to real corporate world by arranging Vocation Practical Training and

Projects.

To organize seminars/leadership programs/workshops of eminent personalities from the corporate

world.

Campus placement in last three years with minimum salary, maximum salary and average salary

Minimum Salary-1.09Lakhs

Maximum Salary-1.70Lakhs


7. Faculty

Branch wise list Faculty members:

Permanent Faculty

DEPARTMENT OF BASIC SCIENCE AND HUMANITIES

Sl.No Name of the Faculty Designation

1 MR. SATISH KUMAR

LECTURER (MATHS)

2 MISS. SHRABANI MANDAL

LECTURER (MATHS)

3 MR. HANSRAJ SAH

LECTURER (COMPUTER SC.)

4 MS. BABY KUMARI


5 MS. GITA KUMARI


6 MR. ROHIT KUMAR


7 MR. PANKAJ KUMAR MANDAL

LECTURER (PHYSICS)

8 MS. NITU KUMARI

LECTURER (PHYSICS)

9 MR. ALOK KUMAR BHAGAT

LECTURER(CHEMISTRY)

10 MR. SUDIPTO PANDEY

LECTURER (ENGLISH)

11 MS. NEHA BAJPAI

LECTURER (ENGLISH)

DEPARTMENT OF MECHANICAL ENGINEERING

12 MR. SHANKAR KUMAR

HOD (MECHANICAL)

13 MR. GAUTAM KUMAR SHARMA LECTURER (MECHANICAL)

14 MR. MITHILESH KUMAR

15 MR. SHATRUDHAN PANDEY

LECTURER (MECHANICAL)

16 MR. KUMAR SHAHJANAND


17 MS. SARTHI KUMARI


18 MR. NAGENDRA PRASAD


DEPARTMENT OF ELECTRICAL ENGINEERING

19 MR. SAQUIB SHAKIL

HOD (ELECTRICAL)


20 MR. SONU KUMAR JHA

LECTURER (ELECTRICAL)

21 MS. ANU PRIYA


22 MR. ANJAN KUMAR


23 MR. TANMAY LOCHAN


24 MS.PURBASHA KANCHAN GHOSH


DEPARTMENT OF CIVIL ENGINEERING

25 MR. UTTAM KUMAR

HOD (CIVIL)

26 MR. BISHESWAR YADAV

LECTURER (CIVIL)

27 MS. PUTUL KUMARI

LECTURER (CIVIL)

28 MR. RAVIKANT KUMAR

LECTURER (CIVIL)

29 MR. AASHUTOSH KUMAR RAO

LECTURER (CIVIL)

DEPARTMENT OF MINING ENGINEERING

30 MD. IMRAN ANSARI

HOD (MINING)

31 MR. DEEPAK KUMAR

LECTURER (MINING)

32 MR. RAHUL KUMAR CHOUDHARY

LECTURER(MINING)

33 MR.SOUMENDU BIKASH TRIPATHY

LECTURER(MINING)

DEPARTMENT OF METALLURGICAL ENGINEERING

34 MR. KARAN KUMAR MISHRA

HOD (METALLURGY)

35 MR. SUDHIR KUMAR

LECTURER (METALLURGY)

36 MR. AMAN KR JHA


37 MR. LILDHARI PRASAD


Adjunct Faculty

Sl

No

Name Designation

1. Dr. B. Pradhan Ex-Prof. in Mechanical (IIT

Kharagpur)

2. Dr. B. Mohanty Prof. in English

3. Md. F.Khan Prof. in Mathematics


Permanent Faculty: Student Ratio

1 24

Number of Faculty employed and left during the last three years

8

8. Profile of Vice Chancellor/ Director/ Principal/ Faculty


9. Fee

Details of fee, as approved by State Fee Fixation Committee, for the Institution-Rs 54100/ year

Time schedule for payment of fee for the entire programme- At the time of admission

No. of Fee waivers granted with amount and name of students

Number of scholarship offered by the Institution, duration and amount-Nil

Criteria for fee waivers/scholarship

Estimated cost of Boarding and Lodging in Hostels- Rs 44000/year

10. Admission

Number of seats sanctioned with the year of approval-

Academic Year 2016-17 2017-18 2018-19

Approved Seats 300 300 300

Number of Students admitted under various categories each year in the last three years

11.

Category /

Year SC ST OBC GEN Total

2016 26 40 140 76 282

2017 26 32 158 67 283

2018 27 46 123 74 270

TOTAL 79 118 421 217 835

Number of applications received during last two years for admission under Management Quota and number admitted

2017-18 2018-19

Number of applications

received

105 122

Number admitted 60 60

12. Admission Procedure

Mention the admission test being followed, name and address of the Test Agency and its URL (website)- Jharkhand Combined Entrance Competitive Examination Board (JCECEB), URL- http://jceceb.jharkhand.gov.in / Pakur Polytechnic Common Entrance Test (PPCET), URL- https://www.pakurpolytechnic.ac.in/

Number of seats allotted to different Test Qualified candidate separately (AIEEE/ CET (State conducted test/ University tests/ CMAT/ GPAT)/ Association conducted test)

Calendar for admission against Management/vacant seats:

Last date of request for applications – 31st May

Last date of submission of applications – 31st May

Dates for announcing final results – 5th June

Release of admission list (main list and waiting list shall be announced on the same day)

Date for acceptance by the candidate (time given shall in no case be less than 15 days)

Last date for closing of admission – As directed by DHTE&SD, Jharkhand

Starting of the Academic session- 1st August

The waiting list shall be activated only on the expiry of date of main list

The policy of refund of the fee, in case of withdrawal, shall be clearly notified – As per

AICTE guidelines

13. Criteria and Weightages for Admission

Describe each criterian with its respective weightages i.e. Admission Test, marks in qualifying examination etc. – Marks obtained in Matric as well as in entrance exam.

http://jceceb.jharkhand.gov.in/

https://www.pakurpolytechnic.ac.in/


Mention the minimum level of acceptance, if any

Mention the cut-off levels of percentage and percentile score of the candidates in the admission test for the last three years

Display marks scored in Test etc. and in aggregate for all candidates who were admitted

PAKUR POLYTECHNIC PAKUR

Merit List/Result Sheet

P.P.C.E.T-2018 (Regular)

S.

No. Student's Name

Preferable

Branch

Marks Total

secured

Marks

(60)

Math

(15)

Physics

(15)

Chemistry

(15)

English

(15)

1

MRITUNJAY

RAVIDAS CIVIL 11 2 7 3 23

2 VIVEK ANAND CIVIL 9 8 11 10 38

3 KARMACHAND

KUMAR DAS CIVIL 3 1 2 5 11

4 JUEL SHAIKH CIVIL 5 4 8 6 23

5 MANUEL KISKU ELECTRICAL 7 1 5 3 16

6 SUMIT SOREN ELECTRICAL Ab Ab Ab Ab 0

7 MANGAL

HEMBROM Ab Ab Ab Ab 0

8 RAKESH KUMAR

SAH Ab Ab Ab Ab 0

9 MANTOSH KUMAR CIVIL Ab Ab Ab Ab 0

10 SAGAR MAHATO 4 4 2 5 15

11 VISHNU KUMAR

KESHRI 6 2 5 3 16

12 VIVEK ANAND ELECTRICAL 7 4 7 6 24

13 SITARAM PATRA MINING 7 6 10 8 31

14 DEBKANTA GHOSH MINING 7 2 4 5 18

15 BHASKAR PAL MINING 7 4 5 3 19

16 ANISH KUMAR

SINGH MINING 8 5 5 8 26


17 SIMA KUMARI CIVIL 8 3 3 4 18

18 AMAN KUMAR

SAHA CIVIL 10 8 10 7 35

19 SAIMAN MARANDI MECHANICAL 10 4 6 5 25

20 RAJA THAKUR CIVIL 8 3 7 4 22

21 ROHAN SHILL ELECTRICAL 5 3 7 8 23

22 DABLU KUMAR MECHANICAL Ab Ab Ab Ab 0

23 AKHILESH KUMAR MECHANICAL Ab Ab Ab Ab 0

24 PRITHIWICHAND

KISKU CIVIL 10 4 5 5 24

25 ANKIT KUMAR

SINGH MECHANICAL Ab Ab Ab Ab 0

26 SURJIT KUMAR

SAH MECHANICAL 10 8 8 6 32

27 KUNDAN KUMAR

SAH MECHANICAL 11 2 7 2 22

28 VIVEKANAND SAH CIVIL 10 3 6 10 29

29 ABHISHEK KUMAR

ANAND CIVIL 10 4 4 7 25

30 BEAPLAB KUMAR

CHOUDHARY MINING 9 4 7 5 25

31 SAYED REHMAN

FAZAL METALLURGY 11 6 11 6 34

32 AYUSH KUMAR

PANDEY ELECTRICAL 10 5 9 5 29

33 GOVIND MANDAL METALLURGY 6 1 3 4 14

34 TANMAY DAS

BAIRAGYA MINING 7 6 6 5 24

35 AMINA KHATUN CIVIL 8 2 7 4 21

36 AJAY KISKU MECHANICAL 5 3 4 2 14

37 MANPREET SINGH MECHANICAL 5 5 8 8 26

38 GAURAV KUMAR

DAS ELECTRICAL 10 4 3 6 23

39 AMAN KUMAR

GUPTA ELECTRICAL 7 2 7 8 24

40 RAFIUL SEKH ELECTRICAL 4 5 7 8 24


41 KRISHNA DULAI

GORAI MINING 9 4 7 4 24

42 ALOK KUMAR CIVIL 10 3 7 10 30

43 SONU KUMAR MECHANICAL 10 5 9 6 30

44 SUMAN KUMAR

GHOSH METALLURGY 10 1 7 5 23

45 NILOTPAL NAYAN ELECTRICAL 6 2 6 5 19

46 OMKAR SINGH METALLURGY 9 4 2 5 20

47 RAHUL SAHA ELECTRICAL 11 3 3 6 23

48 RAJ ABHISHEK

MANDAL CIVIL 11 3 7 9 30

49 AMISHA KUMARI CIVIL 11 2 11 5 29

50 NALIM PAUL

HANSDA CIVIL 11 8 8 10 37

51 RAJ KUMAR RAM CIVIL 7 3 5 3 18

52 PALLAV RAJ MINING 11 6 10 8 35

53 GUNJAN HEMBROM METALLURGY 13 3 13 8 37

54 SEKEN MURMU ELECTRICAL 10 7 5 7 29

55 CHITRANJAN

KUMAR SAH ELECTRICAL 9 4 6 2 21

56 SUBHAM NUNIA MINING 7 2 4 5 18

57 PRASHANT KUMAR

MISHRA MECHANICAL 9 5 5 6 25

58 AMAN ABHINAV MECHANICAL 10 6 5 9 30

59 SATYAM

BHATTACHARYA MECHANICAL 12 6 9 3 30

60 PRITY KUMARI CIVIL 13 8 10 10 41

61 MANISH RAJ MECHANICAL 9 4 8 10 31

62 HIMANSHU

CHAUHAN ELECTRICAL 11 6 13 7 37

63 OMPRAKASH

PRAMANIK MECHANICAL 9 5 7 5 26


64 RANJIT KUMAR

PANDIT MINING 8 6 9 6 29

65 MD. TARIK AHMAD CIVIL 9 3 10 6 28

66 AMIT KUMAR

GOND MECHANICAL 12 6 12 9 39

67 PANKAJ KUMAR

ROY CIVIL 11 9 5 2 27

68 UJJAWAL GHOSH MINING 6 6 4 6 22

69 AVINASH MURMU ELECTRICAL 7 5 9 7 28

70 NOOR SHAMMI METALLURGY 7 4 4 7 22

71 MUKESH SAHA MECHANICAL 9 4 10 5 28

72 HASIM REJA MECHANICAL 11 9 8 6 34

73 ANUP MANDAL ELECTRICAL 3 4 5 4 16

74 SONU MANDAL MECHANICAL 4 2 7 4 17

75 PRAMOD KUMAR CIVIL 7 4 6 4 21

76 ADITYA KUMAR CIVIL 10 4 7 2 23

77 RISHAV KUMAR CIVIL 13 10 12 8 43

78 MANISH KUMAR ELECTRICAL 8 7 2 3 20

79 WASIM ANSARI CIVIL 4 4 3 1 12

80 DEEPAK KUMAR 9 4 6 9 28

81 MD. NAJBUL

ANSARI CIVIL 10 6 3 8 27

82 NELI NIROJANI

SOREN CIVIL 5 5 8 7 25

83 ANUP SOREN ELECTRICAL 7 5 8 7 27

84 SAURAV RAJ METALLURGY 13 7 7 10 37

85 BABY KHOYA METALLURGY 10 5 7 3 25

86 BINOD BIHARI

PAUL ELECTRICAL 6 1 4 2 13

87 AMAN KUMAR

JAISWAL ELECTRICAL 8 3 10 11 32


88 ASHISH RAJ ELECTRICAL 10 11 8 9 38

89 AHASHAN JAMIL ELECTRICAL 10 3 6 11 30

90 MD. SAYEED

ANSARI ELECTRICAL 8 1 5 2 16

91 VISHAL YADAV CIVIL 8 2 7 7 24

92 SARFARAJ AHMAD CIVIL 11 2 4 6 23

93 VIVEK YADAV CIVIL 5 2 6 7 20

94 SUMAN KISKU CIVIL 5 5 4 6 20

95 NIRVAY SINGH CIVIL 10 9 11 6 36

96 YASH KUMAR

AGNANI CIVIL 10 6 7 11 34

97 RAKESH KUMAR

MURMU CIVIL 4 3 5 7 19

98 ANKIT DAS CIVIL 11 6 9 9 35

99 MANSHI KUMARI CIVIL 9 3 6 9 27

100 SUSHANT KUMAR METALLURGY 2 1 2 0 5

101 MD. TASLIM

ANSARI CIVIL 10 4 10 5 29

102 SONAM KUMARI ELECTRICAL 10 6 13 6 35

103 PARSHURAM

MAHTO CIVIL 5 3 8 4 20

104 PRITI KUMARI CIVIL 7 3 5 4 19

105 VAISHNAVI

KUMARI ELECTRICAL 6 6 6 9 27

106 MUSHAROF

HOSSION ELECTRICAL 7 4 3 5 19

107 PRIYANKA GLORY

MALTO CIVIL 8 6 7 4 25

108 JAY DEV MAL METALLURGY 6 5 5 1 17

109 AMAN KUMAR METALLURGY 7 7 8 6 28

110 JACOB MALTO METALLURGY 8 4 4 8 24

111 KRISHNACHANDRA

DUTTA MINING 3 5 7 3 18

14. List of Applicants


List of candidate whose applications have been received along with percentile/percentage score for each of the qualifying examination in separate categories for open seats. List of candidate who have applied along with percentage and percentile score for Management quota seats

LIST OF STUDENTS ADMITTED IN OPEN COUSELLING

SL.NO NAME DOB CATEGORY % AGE OF 10TH MARK

1 JAYANT KUMAR YADAV 23/10/2002 BC2 85.2

2 ANIL MARANDI 17/10/2002 ST 79.6

3 RIYA HEMBROM 13/04/2003 ST 79.4

4 KOUSHAL KISHOR 05/01/2002 ST 79

5 RAMANUJ KUMAR SAH 14/01/2002 BC1 74.8

6 AMIT HEMBROM 25/01/2001 ST 74.1

7 ZILHAJ SHAIKH 04/03/2001 BC1 71

8 KOUSAL RANA 10/05/2003 BC2 68.2

9 DEEPAK ANAND 05/11/2001 BC1 67

10 MD KAIF ALI 05/02/2003 BC1 66.8

11 MD HUMAYUN KABIR 15/12/1999 BC1 66.6

12 JAY KISHAN KUMAR SAH 02/11/2001 BC1 65.4

13 SHUBHAM KUMAR 05/05/1998 BC1 65

14 SUMAN KUMAR MANDAL 14/04/2003 BC2 64.2

15 SINGH PRIYA VAKIL 12/04/1999 GEN 64

16 BIPUL PRAKASH 20/09/1998 GEN 62.7

17 ABHISHEK TIWARI 10/02/2002 GEN 59.6

18 AMIT KUMAR HANSDA 18/03/1999 ST 58.4

19 PARIMAL MAHTO 22/05/1995 SC 56

20 PANKAJ KUMAR SAHA 21/04/2001 BC1 52.4

21 SOHEL AKHTAR 30/01/2002 BC1 51.2

22 ABHISHEK MURMU 09/06/2002 ST 50.8

23 PRAKASH KISKU 05/06/1996 ST 49.41

24 NIRANJAN HEMBROM 08/04/2003 ST 48.4

25 ROHAN KUMAR SHA 17/07/1999 BC 44

26 DIGAMBER KUMAR MANDAL 20/06/1999 BC1 41

27 AMITANSU CHANDRA 26/03/2001 GEN 82

28 RAJNEESH RANJAN 21/02/2002 SC 69.8

29 RAMIJ RAJA 08/07/1999 BC1 68

30 MANISH KUMAR BHAGAT 01/09/2000 BC2 66.8


31 MD ARWAZ KHAN 10/05/2000 GEN 64.6

32 PRASAD RUPESH KUMAR KAMLESH 05/06/2000 BC1 64.5

33 AASISH KARMAKAR 31/12/1989 BC1 62.4

34 CHANDAN KUMAR JHA 10/08/1998 GEN 61

35 KOUSHIK DEY 30/10/1997 GEN 60

36 LALMOHAN KUMAR 03/01/1992 BC2 59

37 DEEPAK KUMAR MANDAL 09/10/1998 BC1 58.4

38 ROHIT KUMAR 19/09/1999 BC2 53.2

39 SHIVRANJAN KUMAR SINGH 07/10/1999 GEN 53.2

40 ANISH SAH 12/01/2000 BC1 52

41 UJJWAL GHOSH 01/03/1999 GEN 52

42 ASHISH HANSDA 28/06/2001 ST 51

43 SHANU KUMAR 28/06/2001 BC1 50.2

44 MUKESH KUMAR GUPTA 07/01/2000 BC2 49.6

45 ANISH BHARDWAJ 20/08/2000 GEN 49

46 SAHID KHAN 12/08/1997 GEN 43

47 BIKRAM BIHARI BHIMSEN 10/03/2001 SC 42

48 AMAN KUMAR 05/04/2002 BC2 77.9

49 JACOB MALTO 02/01/1998 ST 75.4

50 SAHEB TUDU 12/07/2001 ST 66.6

51 JARJIS ALAM 5/12/2000 BC1 69

52 JITRAM KORA 01/01/2003 ST 64.6

53 PRAVIN PATEL 05/09/2002 BC1 62.8

54 JEKASH SAHA 10/05/2002 BC1 62.8

55 ARTI KUMARI 23/09/2002 BC1 60

56 MANNU MARSHAL MARANDI 13/06/1999 ST 53.6

57 HOPNA HANSDA 26/12/1992 ST 53

58 MD SAHABUDDIN ANSARI 13/02/2001 BC1 52

59 SAKET BHAGAT 13/01/2003 BC1 47.4

60 BISHESH RAJ RANJAN 26/05/2002 SC 47.2

61 PIYUSH KUMAR 15/09/2002 GEN 45.8

62 ABHIJEET KUMAR 06/10/2001 BC2 45.4

63 MIHIR BHAGAT 23/08/2000 SC 45

64 SHUBHANKAR GHOSH 02/08/2003 BC1 79.2

65 MANSI KUMARI 24/02/2003 BC2 79


66 PRAMOD KUMAR 20/11/2002 BC1 78.57

67 PRITHIWICHAND KISKU 01/01/2002 ST 78.2

68 NALIN PAUL HANSDA 09/11/1997 ST 77.9

69 RAJ ARYAN HANSDA 05/08/1997 ST 73.2

70 PAWAN KUMAR 01/01/2000 BC1 66.5

71 MIRTUNJAY RAVIDAS 12/11/2000 SC 66.4

72 RAMASHIS MISHRA 04/03/2002 GEN 60.2

73 SAKSHI SINGH 29//05/2002 GEN 55.6

74 ANKIT KUMAR 18/02/2002 GEN 51.4

75 ABHISHEK KUMAR ANAND 10/09/2003 SC 50

76 SUMAN KUMAR GHOSH 26/08/2003 BC1 49.6

77 BENAJIR IQBAL 12/09/1998 BC1 49.4

78 DEEPAK KUMAR 25/07/2002 SC 48.8

79 KARMA CHAND KUMAR DAS 06/02/1991 SC 46.4

80 DEEPAK KUMAR 19/03/2001 BC1 43.6

81 KESHRI ARVIND KRISHNA 20/11/2002 BC1 40

82 AMARDEEP JHA 24/12/2002 GEN 82.8

83 KESHAV KUMAR 24/12/2000 GEN 81.7

84 SUPRIYA KUMARI 07/12/1999 GEN 77.9

85 VIVEK ANAND 04/12/2002 BC1 70.8

86 NEETU KUMARI 05/09/2003 BC2 69.6

87 MUSKAN SINGH 16/12/2002 GEN 67

88 SANTOSH KUMAR 05/02/1999 BC1 66

89 ROHAN SHILL 13/09/1999 BC1 65

90 AYUSH KUMAR PANDEY 19/02/2003 GEN 64.4

91 AMAN KUMAR GUPTA 12/06/2003 BC2 63.8

92 ASIBUL SHEIKH 12/05/2001 BC1 62

93 PALLAVI PANDEY 06/01/1999 GEN 60.2

94 SUMIT KUMAR 12/01/2000 BC2 58.9

95 DIBYA PRABHA 28/11/2001 GEN 58.6

96 PRAKRITI PALLAVI 22/01/1999 GEN 57

97 ASIF ALI 05/04/2003 BC1 56.8

98 HARE KRISHNA PANDIT 10/08/2002 BC1 56.4

99 RIMA PALLAVI 06/01/2001 SC 55.8

100 NOREN KISKU 18/02/2001 ST 55.4


101 ABHISHEK RAY 08/04/2001 GEN 55.2

102 SOURABH KUMAR 01/01/2001 BC2 54.6

103 ASHISH KUMAR DAS 01/02/2003 SC 53.8

104 SOURAV KUMAR 02/12/2000 SC 52.6

105 SHIVAM KUMAR MISHRA 26/07/2001 GEN 51.3

106 AMIT KUMAR YADAV 15/02/2002 BC2 51

107 ADITYA RAJ 30/08/2001 GEN 50.2

108 ANUP SOREN 23/10/2002 ST 49.8

109 MANISH KUMAR 02/01/1991 GEN 47.8

110 KRISHNA MUNDA 20/01/2003 ST 47.66

111 SARAFARAJ ANSARI 11/01/1999 BC1 47.4

112 GOPAL SINGH 23/03/2000 BC2 41.2

113 ANIKET KUMAR 04/04/2003 BC1 40.6

LIST OF STUDENTS ADMITTED IN MANAGEMENT QUOTA

SL.NO NAME DOB CATEGORY % AGE OF 10TH

MARK

1 SIMI KUMARI 01/01/2002 BC1 60

2 PRASHANT KUMAR MISHRA 02/02/2001 GEN 81.7

3 HASIM REZA 17/07/2000 BC1 64.6

4 MANISH RAJ 20/12/2002 BC2 53.8

5 KISHOR KUMAR 10/04/1999 BC2 52.2

6 SATYAM BHATTACHARYA 08/01/2002 GEN 56.6

7 SUSHIL MURMU 20/11/2001 ST 60.8

8 RAJ KUMAR RAM 26/01/1998 SC 72

9 AVISHEKH MISHRA 23/02/2001 GEN 54.4

10 AMAN ABHINAV 23/03/2002 GEN 44.4

11 MANPREET SINGH 28/03/2001 GEN 58

12 JAY DEV MAL 27/06/2000 GEN 52.2

13 TANMOY DAS BAIRAGYA 12/01/1994 GEN 45.42

14 ANISH KUMAR SINGH 03/02/2001 GEN 68.4

15 BHASKAR PAL 01/11/1997 GEN 44

16 DEBKANTA GHOSH 02/09/2000 GEN 26.42

17 PRIYANSHU RAJ 05/03/2001 GEN 81.7

18 ABHINASH KUMAR SINGH 10/02/2000 GEN 47

19 ABHISHEK PRASAD 26/08/2000 BC1 66


20 ROHAN KUMAR SINGH 05/03/1999 SC 54.6

21 KRISHNA CHANDRA DUTTA 11/12/1998 BC2 52.8

22 KRISHNA DULAL GORAI 04/09/1998 BC1 61

23 SUVAM NUNIA 28/02/1996 SC 37.85

24 GAGAN KARMKAR 11/02/2001 BC2 51

25 SAYED REHAN FAZAL 31/03/2003 GEN 54.6

26 KANHAIYA KUMAR PASWAN 21/06/2002 SC 36.6

27 AMAN KUMAR 08/08/2002 BC2 57.6

28 GUNJAN HEMBRAM 15/02/2003 ST 85.2

29 SUNITA SOREN 16/03/1999 ST 53.8

30 NOOR SHAMMI 24/10/2002 BC1 58.8

31 PALLAV RUJ 12/03/2003 BC1 82.4

32 SOURAV RAI 19/02/2002 BC2 71.2

33 GOBIND MANDAL 05/02/1995 GEN 45.6

34 BABY KHOYA 23/11/2001 ST 48.4

35 OMKAR SINGH 01/08/2003 BC1 50.6

36 SAVITRI KUMARI 20/02/1998 BC2 41.6

37 PRITI KUMARI 15/06/2001 BC2 55.8

38 VIVEKANAND SAHA 15/06/2002 BC1 56

39 DHARAMVIR SINGH 01/11/2002 BC1 61.8

40 ANKIT DAS 26/02/2002 BC2 67.8

41 MD NAJBUL ANSARI 27/10/2002 BC1 72.8

42 BHAV PRITA NAND 05/04/2000 SC 56.8

43 VIVEK ANAND 18/10/2002 BC1 65.16

44 SIMA KUMARI SINGH 16/08/1993 GEN 58

45 SUMAN KISKU 14/02/2001 ST 81.7

46 PARSHURAM MAHTO 25/12/2001 BC1 68.4

47 PANKAJ KUMAR ROY 25/03/2000 BC1 54.2

48 AMISHA KUMARI 07/08/2003 ST 56.8

49 HIMANSHU CHOUHAN 11/07/2003 GEN 90

50 GAURAV KUMAR DAS 27/04/2000 SC 51.4

51 SEKEN MURMU 15/02/2003 ST 73.8

52 AVINASH MURMU 07/02/2001 ST 84.4

53 MD RAIHAN 15/11/2001 BC1 77

54 AJAY KUMAR SHARMA 01/01/2001 BC1 74

55 MANUEL KISKU 25/09/2000 BC2 73.6

56 AHASAN JAMIL 19/09/2000 BC4 55


57 UJJWAL HEMBROM 07/01/2001 ST 48.4

58 RAFIUL SEKH 02/01/2002 BC1 54.2

59 NILOTPAL NAYAN 15/01/1997 GEN 54

60 VAISHNAVI KUMARI 16/06/2002 BC1 52.6

15. Results of Admission Under Management seats/Vacant seats

Composition of selection team for admission under Management Quota with the brief profile of members (This information be made available in the public domain after the admission process is over)

Score of the individual candidate admitted arranged in order or merit

List of candidate who have been offered admission

Waiting list of the candidate in order of merit to be operative from the last date of joining of the first list candidate


List of the candidate who joined within the date, vacancy position in each category before operation of waiting list

16. Information of Infrastructure and Other Resources Available

Number of Class Rooms and size of each – 15 nos. and 75 sqm. each

Number of Tutorial rooms and size of each – 4 nos. and 37.5 sqm each

Number of Laboratories and size of each – 33 nos. and 75 sqm each

Number of Drawing Halls with capacity of each – 2 nos. and 60 each

Number of Computer Centres with capacity of each – 2 nos. and 75 each

Central Examination Facility, Number of rooms and capacity of each

Barrier Free Built Environment for disabled and elderly persons - yes

Occupancy Certificate - yes

Fire and Safety Certificate - Applied

Hostel Facilities - yes

Library

No of Books Titles Online National

Journals

Online International

Journals

E- Library facilities

5100 450 20 3 Available

Laboratory and Workshop

1. Civil Engineering Department Laboratory

Sl No.

Name of Laboratory Major Equipments

1 SURVEYING LAB

Plumb bob & U fork, Surveyor's Compass with Tripod Stand, Auto level with Tripod Stand, Levelling Staff,Digital Planimeter, Umbrella, Focus 2 Dual face with Tripod stand, Prism reflector, Plain table with standard assessories, Theodolite with tripod stand, Metric chain, Engineering Chain, Gunter's chain, Metallic tape,Ranging Rod, Arrow, Peg, Optical square, Cross staff with stand, Prismatic compass with Tripod stand.

2 CONCRETE

TECHNOLOGY LAB

Sieve, Vicat Apparatus, Le-chatelier Mould, Le-chatelier water bath, Measuring cylinder, Electric oven, Compression Testing machine, Mould cast iron (150mm) Cube, Mould steel (70.6)mm cube, Tamping Rod, Aggregate Impact tester, Electric balance, Slump test with tamping rod, Thickness Guage, Length guage, Speedy moisture meter, Los angeles abrasion testing machine.

3 GEOTECH LAB

Core Cutter with all Assessories, Sand Pouring Cylinder,Calibrating cCan, Metal Tray with a Central Hole, Sieve Analysis Equipment, Pycnometer Bottle, Casagrande apparatus with grooving tool, Rapid moisture meter, Direct shear test Apparatus, Vane shear test apparatus Hand & Machine operated, Standard Proctor test,CBR apparatus, Spatula, Triaxial Analog Pour pressure Assembly with foot pump.

4 ENVIRONMENTAL

ENGINEERING LAB

Digital Turbuidity, Buffer Tablet (PH4 &PH7), Toatal Dissolve solid meter, Kit for dissolve oxygen experiment, BOD with KIT, Magnesium sulphate, COD with kit, Fluoride & Chloride test Kit.

5 STRENGTH OF MATERIAL LAB

Universal testing Machine, extensometer,hardness testing ,impact testing, torsion testing ,machine.


6 HYDRAULICS LAB

Bernoulli's theorem ,Venturimeter and Orifice Meter,Orifice & Mouthpiece ,Hydraulic bench setup,Pelton wheel,Centrifugal Pump,Reciprocating pump,Reynolds,Loss due to flow through pipes,Coefficient of friction of flow through pipe.

7 TRANSPORTATION

ENGG LAB

Sieve test of course aggregate, impact value testing machine, Los angeles abrassion testing machine, Length guage, Thickness guage, Softening point of Bitumen, Penetration test of Bitumen, Ductility test of Bitumen, Benkemen Beam, Crushing valve.

8 ENGINEERING

MECHANICS LAB

Law Polygon of Forces ,Law of Moment ,Lami's Theorem, Jib cran, Friction, Centre of gravity ,Worm wheel, Diffrential, Single and Double Purchase,Simple Screw Jack ,Pulley block Apparatus.

2. Electrical Engineering Department Laboratory

Sl No.

Name of Laboratory

Major Equipments

1

DC MACHINE LAB AND

TESTING AND MAINTENANCE

Load test of DC series Motor, Load test for DC shunt motor,Speed control of DC shunt Motor (voltage armature and field current control method),To identify the constructional parts of DC machine,To identify the Constructional detail of three phase transformer,Control panel for efficiency of a single phase transformer direct loading,Control panel for parameter and losses in asingle phase transformer by OC and SC test, To determineate pilot devises like push buttomn switches limit switches selector, Variac 4amp single phase, variac 4amp single phase,Rheostat 300 ohms ,Rheostat 100ohm, Variac 8amp single phase,active pass bend filter,Load test DC series motor,Variac 4amp single phase, Cotrol panel for sumpners test (back to back ) test on single phase transformer

2

AC MACHINE LAB AND

TESTING AND MAINTENANCE

To perform experiment for a given three phase induction motor with direction line, Control panel for angular displacement of synchroneous motor,Thyristor/IGBT controlled AC motor with vvvf control three phase 3HP,Panel for to connectstart and reverse the direction of rotation of three phase induction motor,Control panel for the block rotor test of three phase induction motor,To list different types of starters for three phase induction motoridentity and use the some to start,OCand SC test of three phase synchrounes machine,Phase experiment setup, To determine v-curve of a three phase synchrounes motor at no load half load and full load ,Starting and Reversing the direction of rotation of a single phase motor,ontrol panel for the block rotor test of three phase induction motor,To study synchrousnise and parallel operation of two alternator,To study verious type of over current relays and toplot the performance charecteristics,To understand the protection schems of alternator and sketchlabeled schematic diagram,Variac 8amp single phase, Cotrol panel voltage relationship of three phase transformer in verious connection, Loading Rheostat 1kw single phase in 5 step of 200watt, Loading Rheostat three phase 1.5 kw ,Variac 10amp three phase, three phase inductive load 10amp, Three phase capacitive load 10amp,resistive lamp load 1kw three phase (r load),Rheostat 300ohm 2amp,Loading Rheostat 1kw single phase 200watt,Variac 10amp three phase,Control panel for parallel operation of single phase transformer, variac 10amp, Loading rheostat 2kw single phase, Variac 8amp ingle phase,

3

BASIC ELECTRICAL ,

ELECTRONICS LAB AND

POWER ELECTRONICS

BH curve apparatus, BH , curve, DC regulated power supply, series parallel resistance kit, PN junction diode charecteristics kit, AC power supply o/p (0-30v) 2amp, Charging and Discharging kit of codenser, Kirchhoffs law apparatus kit, Dc regulated power supply, Digital storage oscilloscope, Digital multimeter, Battery Eliminator, Cell(2v,20AH),CRO 20MHZ, analog function generator 1KHZ to 200KHZ, LCR impedance apparatu with alluminium panel and square meter, LCR reasonance apparatus within builtin sine wave osillator, To verify the line


and phase value for star connected balance load, To verify the line and phase value of delta connected load,Network Theorms (superposition, thevenin, nortons and maximum power transfer ) with bakelite panel round meter, PN junction diod cheracterstices Apperatus, Zener diod VI cheracterstices Apperatus, Half-wave , Full wave And Bridge Recatifier Apperatus , Transistor Cheracterstices Apperatus, FET Chearcterstices Apperatus, UJT Chearcterstices Apperatus, Voltage Steplization Chearcterstices Of zener diod. , Transistor series and shunt regulator, comon emitter trnsistor amplifier , two stage RC couple amplifier , FET common source Amplifier , Common Base Amplifier , Colpit-Oscillator , Phase Shifet oscillator Trainner , RC circuit Low Pass & High pass Filtter , Cliping and Claping circuit Appratus , Application of IC555, LVDT kit , Load cell Trainner, tempratur sensor kit , operational amplifier as inverting and non inverting, summing and differance Amplifier, OP-Amplifier as VI- convertor , Tachometer, PH meter , 4/8 bit digital Anolog convertor , Trainer kit , Study of SCR characteristics Appartus , kit of SCR single Phase half wave , full wave fully controlled bridge rect/convertor, study of parallel invertor using SCR, Study of Series invertor using Scr, Morgon's chopper, universal AC/DC Motor Cntroller , Strain Gauge Trainer Kit, Speed Measuerment Module using Photoelectric And Megnatic Sensor , LVDT kit , thermo couple trainer kit, Thermister Cheracterstics Apperatus , load cell trainer kit ,

4

MEASUREMENT LAB AND

INSTRUMENTATION LAB

Mesarement of current and voltage, by low range ameter and voltmeter , power in single phase cuircit using single phase work meter CTand PT , mesaurment of active and reactive Power In three phase balance load, by using single watt meter method, mesauerment of power in three phase cuircit by two watt meter method , study of single phase in energy meter , measuerment of single phase and three phase balance load using electronic energy meter with lamp load, kelvin bridge, DC source and galvano meter , wheatstone bridge with MFR registance on board, megger 500v, 3 1/2 digital multimeter, 3 3/4 dgit clamp meter , digital earth tester, LCR Q-meter Mesearment of power factor of single phase and three phase load by PF meter and verifying throug IV and P measuerment , observ the p[hase sequency of three phase curcit using rotatting type phase sequance indictor, mesarment of frequancy of ac supply using westonen ferrodynamic type frequancy meter

5 DIGITAL &

MICROPROCESSOR LAB

logic gaates using six TTL IC,Study of basic Logic gates, demorgans Theorm, Verification of truth table of logic gates using universal gates, Digital full adder and subtractors using nand gates, BCD to seven segment decoder, Trainer kit for universal shift register, BCD to seven segment decoder, 16 to 1 line multiplexier and 1 to 16 line demultiplixser ,8085 microprocessor training kit, 8086 microprocessor training kit, Trasistor pnp and npn, Resistor different range

6 SWITCH GEAR &

PROTECTION

To study different switch gesr equipments used in lelectrical power system, Panel for study different types of fuses MCB and ELCBs, To verious types of over current relays and toplot the performance charecteristics, To understand the protectionshemes of alternator and tosketch labeled schematic diagram of verious types of protection of alternaator, percentage bias differential relay testing kit, To performance experiment for a given three phase induction motor with DOL starter .


3. Mechanical Engineering Department Laboratory

Sl No.

Name of Laboratory

Major Equipments

1 Strength of Material Lab

1.Universal testing machine , 2.extensometer,3.Hardness testing machine,4. Impact testing Machine , 5.Torsion testing machine.

2 Thermal

Engineering Lab

1.Stefan boltzman apparatus ,2.Thermal conductivity of metal rod apparatus ,3.10 types of Boiler,4. Solar water heating system,5. Model of Plate Heat exchanger,6. photovoltaic cell,7. model of surface condenser,8. model of steam engine

3 Engineering

Mechanics Lab

1. polygon of forces app ,2.Law of moment ,3.Lami's theoram app, 4.Jib crane app, 5.friction, 6 C.G APP ,7.Worm wheel deffrential, 8.single and doubl purchase,9.Simple screw jack ,8.Pulley block apparatus.

4 Fluid mech & machinery lab

1.Dead weight pressure gauge app 2.Bernoulli's theorm App ,3.Venturi meter and orifice meter App,4.Orifice &mouthpiece App ,5.Hydraulic bench setup App,6. Pelton wheel turbine App,7. Centrifugal pump testing rig,8. Reciprocating pump testing rig,9. Renoyed's App. 10.Determination of Loss due to flow through pipes ,11.Coefficient of friction of flow through pipe.

5 Refrigeration and air conditioning

lab

1.Ice plant test rig. Domestic refrigerator test rig. 2.RAC Controls.4. Working Hermetically sealed compressor. 5.Air conditioning test rig. 6.Cut section model of hermetically sealed compressor. 7. Refrigeration equipment maintenance tool kit.

6 Power engg lab

1.Multi cylinder petrol engine.2. Single cylinder air cooled petrol engine.working model of four wheeler engine. 3.Working model of two wheeler engine.4. Synchromesh gearbox.5. Working model of differential.6.working model of steering gearbox. 7.Suspension.8. Hydraulic brake system. 9.Working model of IC engines. 10.Model of Horizontal axis wind mill.

7 Metrology and quality control

lab

1.Radius gauge. 2.pitch screw gauge.3.filler gauge.4.vernier caliper .5.digital vernier caliper.6.vernier height gauge.7.Vernier depth gauge 8.Dial type vernier caliper , 9.Outside micrometer ,10.Inside micrometer, 11.Tube micrometer , 12.Slip gauge set , 13Adjustable snap gauge ,14. plug gauge , 15.Ring gage, 16dil indicater , comparator stand , sine bar and sine center , dial stand adujstable , gera tooth vernier , test dial indicator , test mandrel, vernier vevl protractor, set of angle gauges, optical flat, sprit level block, comprators .

8 Industrial fluid

Power Lab 1.Punematic trainer Kit.2.Hydraulic trainer kit

9 Theory of

machine Lab

1.Model Of Various Inversions Of Mechanism. 2.Model Of Various types of Clutch.3. Different types cam& followers..4. Model of governor. 5.Models of mechanically Operated braking mechanism.6. Models of dynamometer. 7.Models of Clutch. 8.Balancing of several masses rotating in a single plane test rig.

10 Measurements &

control Lab 1.Capacitive transducer 2.Stroboscope 3 Inductive pickup for speed measurement.

11 Manufacturing

technology

1.slotting machine 2.shaper machine 3.universal grinding machine 4.Universal milling machine 5.surface grindermachine 6.TIG-300A 7.MIG-400A


4. Metallurgical Engineering Department Laboratory

Sl No.

Name of Laboratory

Carpet Area(Sq.

mt.) Major Equipments

1 FOUNDRY LAB 100

Hand rammer, Smoother, Showel, Trowel, Vent wire,Swab,Draw spike, Flat end cleaner, Knife end cleaner, Sprew rod, Gear pattern, Flange Pattern, Dumble pattern, Straight pipe with core box pattern, Pulley pattern, Crucible,Cope and Drag, Bentonite, Tube oven, Permeability testing machine, Sand rammer

2 PHYSICAL

METALLURGY LAB

100 Optical microscope, Double disk polishing machine,

3 CHEMICAL

ANALYSIS LAB 100

Strohlein apparatus, Pensky martin apparatus, Redwood viscometer, Muffle Furnace

5. Mining Engineering Department Laboratory

Sl No.

Name of Laboratory Major Equipments

1 Mining Tech. & Geology #Sylvester Prop Withdrawer, Props, Exploder, #Rocks & Minerals Samples, Mohs Hardness Scale, Brunton Compass, Clinometer

2 Mine Environment &

Ventilation Flame Safety Lamp, Gas Testing Chamber, Centrifugal & Axial Fan Model, Methanometer, Hygrometer

3 Rock Engineering Point Load Index Tester, Brazilian Test Apparatus, Unconfined compression tester, Triaxial Cell

4 Mining Machinery & MOW Haulage Safety Device Model, Winding Drum Model Rope Capel, Safety Hook, Triangular distribution Plate, Rope Splicing Menthod model.

6. Basic Science and Humanities Department Laboratory

Sl No.

Name of Laboratory

Major Equipments

1 Physics Lab

1 Flat spiral spring 2 Compound bar pendulum 3 Knife edge for bar pendulum 4 Bunsenís photometer 5 Luminous bodies of two different luminous intensities 6 Portable decibel meter 7 Joules calorimeter 8 Ammeters of ranges 0-100 mA 9 0-100 microampere, 0-2 ampere 10 0-5 ampere, 0-50 ampere 11 Connecting wires 12 Plano convex lens of large radius of curvature of the order of 100 cm 13 Short focus convex lens (15 to 20 cm) 14 Optically plane glass plates 15 Table lamp 16 Magnetic needle 17 Spectrometer 18 Portable spray cans of penetrant


19 Searle’s apparatus for determination of thermal conductivity 20 Steam chamber 21 Dimmer stat 22 Capacitors (60-80 mF) 23 Voltmeter (0-200 V) 24 Flat condenser plates 25 Small polythene spacers about 1mm thick 26 Reed switch 27 Signal generator with low output impedence 28 Protective resistor ( R = 100 k ohm) 29 Platinum resistance thermometer 30 p-n junction diode kit to study I-V characteristics. 31 Galvanometer 32 Resistance box 33 Potentiometer with jockey 34 Kit to measure the numerical aperture of the plastic fiber using 660 nm wavelength LED. 35 Micrometer Screw Guage 36 Pullinger Apparatus 37 Vernier caliper 38 Young’s modulus 39 Capillaries of different bore 40 Stokes apparatus 41 He-Ne Laser 42 Digital multimeter 43 Regulated power supply 44 Rheostat 45 Thermometer 46 Boyles law 47 Heater 48 Thormocouple 49 Glass Slab 50 Slotted weight 51 Sodium lamp 52 Mercury lamp 53 Newton’s ring Apparatus 54 Sonometer with tuning fork

2 Chemistry Lab

1 Periodic Table Chart 2 Contech Electronic Balance( 0.001to 120 g ) 3 Digital Coductivity Meter,( Global Make) With Cell 4 Electric Oven( 18" X 18" X 18" ) 5 Distilled Water Plant (Elect) 6 Ltr Cap 6 Analytical weight box (with work cerificate) 1mg to 100gm 7 Battery eliminator 2 To 12 Volt 8 Beaker 250 ml (Borosil) 9 Beaker 500 ml (Borosil) 10 10 Beaker Polythene 1000 ml 11 Beakers 50 ml 12 Beakers100 ml 13 Burette Clamp fischer type, dia pressed made of M.S. Power Coated for 1 burette with bosshead 14 Burette Stand with clamp and bosshead 15 Burette with Pinch Cock 25 ml Borosil 16 China Dish 3" 17 Clay Pipe Triangle 18 Conical flank 100ml 19 Conical Flasks 250 ml (Borosil) 20 Copper Plate for Faraday's Pt Law ECE 21 Copper wires for connection


22 Crucible with Lid 3" (Porcelein) 23 Drier Hot & Cold (Philips) 24 Dropper with Latex 25 Filter Paper 26 Flat Bottom Flask 1000 ml (Borosil) 27 Flat Bottom Flask 2000 ml (Borosil) 28 Flat Bottom Flask 5000 ml (Borosil) 29 Funnel 4" Long Stem (Borosil) 30 Glass Rod 31 Glass Tube App. 0.2mm inner Diameter 32 Glass Tube App. 0.5 mm inner Diameter 33 Indicator Bottles 25 ml (Polythene) 34 Kipps Appartus 1 Lit (Borosil 35 Magnetic Stirrer 1000 ml with hotplate 36 Measuring Cylinder 10 ml (Borosil) 37 Measuring Cylinder 100 ml (Borosil) 38 Measuring Cylinder 1000 ml (Borosil) 39 Metal Blow Pipe 40 One way key 41 Ostwalds Viscometer 25 ml (Borosil) 42 Pair of Tongs 43 Pipette 10 ml 44 Pipette 5 ml 45 Plastic Can( 5 Lit.) 46 Plastic Tray 47 Polish Papers 48 Reagent Bottles 250 ml 49 Reagent Bottles 250 ml (Amber Coloured) 50 Reagent Bottles with wide mouth 51 Reagents Bottles 1000 ml 52 Reagents Bottles 250 ml 53 Rheostat (8") 54 Rubber tubing for burette 6mm 55 Rubber tubing for water steel 6mm 56 Spattula 6" Steel 57 Stop Watch Electronic (Racer) 58 Test Tube Brush 59 Test Tube Holder 60 Test Tube Stand (Polythene) 61 Test tube with rim 15 x 125 mm(Borosil) 62 Thermometer (0 to 110) 63 Thermometer (0 to 360) 64 Tripod Stand (Metal) 65 Volumetric flask 100 ml 66 Volumetric flask 1000 ml 67 Volumetric flask 250 ml 68 Volumetric flask 500 ml 69 Volumetric Pipette 25 ml (Borosil) 70 Watch glass(1.3") Chemicals: 1 Acetic Acid ( Glacial) 2 Ammonium Chloride 3 Ammonium Carbonate 4 Ammonium thiocynate 5 Ammonium Acetate 6 Ammonium Oxalate 7 Ammonia( Liquor) 25% 8 Aluminium Chloride


9 Aluminium Nitrate 10 Acetone 11 Barium Nitrate 12 Bromine Water 13 Barium Sulphate 14 Barium Chloride 15 Blue Litmus Paper Grannuals 16 Blue Litmus Paper 17 Calcium sulpahte 18 Chloroform 19 Chlorine Water 20 Copper Filings 21 Copper Sulphate 22 Copper Chloride(Cupric) 23 Chromium Nitrate 24 Chromium Chloride 25 Calcium Carbonate 26 Cobalt Chloride 27 Cobalt Nitrite 28 Carbon Tetrachloride 29 Dimethyl Glyoxime 30 Ethyl Alcohol 31 Ferrous Sulphate 32 Ferric Chloride 33 Ferrous Sulphide 34 Ferric Sulphate 35 Formaldehyde 36 Grease 37 Hydrochloric Acid 38 Iodine 39 Lead Oxide 40 Lead Acetate 41 Lead Chloride 42 Lead Sulphate 43 Litmus Paper ( Red) 44 Litmus Paper Red Grannuals 45 Mercuric Chloride 46 Mercurious Chloride 47 Manganese Dioxide 48 Magnesium Sulphate 49 Magnesium Chloride 50 Nitric Acid 51 Nickel Chloride 52 Nickel Nitrate 53 Nickel Sulphate 54 Potassium Chromate 55 Potassium Iodide 56 Potassium Dichromate 57 Potassium Hydroxide( Flakes) 58 Potassium Ferrocynate 59 Potassium Ferricynate 60 Potassium Permanganate( Crystals) 61 Perchloric Acid 62 Picric Acid 63 Phenolphthalein 64 Potassium Chloride 65 Potassium Bromide 66 Potassium Pyroantimonate 67 Phenol


68 PH Paper 69 Sodium Hypophosphite 70 Silver Nitrate(A.R.) 71 Sodium Cobaltinitrite 72 Sodium Hydroxide ( Flakes) 73 Sodium Carbonate 74 Sulphuric acid 75 Sodium Chloride 76 Sodium Azide 77 Sodium Thiosulphate 78 Starch Powder 79 Starch Paper 80 Starch Iodide Paper 81 Zinc Sulphate 82 Universal indicator 83 Ferrous alloy 84 Brass alloy 85 Agar powder 86 oil paint 87 Lubricant oil

3 Language Lab Laptop,desktop,microphone,spoken english cassettes & software,ethernet switch & cable

4 Computer Lab Laptop,firewall board,ethernet cable,ethernet switch,projector,server

5 Workshop Lathe,Drilling,Grinding M/C,Open Hearth Furnace,Welding M/C,Fitting Tools,Cutting & Plumbing Tools

a. Computing Facilities

Sl No. Name of Facilities

1 Internet Bandwidth 32Mbps

2 Number and configuration of System

3 Total number of system connected by LAN

4 Total number of system connected by WAN

5 Major software packages available

6 Special purpose facilities available

b. Innovation Cell

c. Social Media Cell

d. Compliance of the National Academic Depository (NAD), applicable to PGCM/ PGDM Institutions and University Departments

e. List of facilities available


i. Games and Sports Facilities

ii. Extra-Curricular Activities

iii. Soft Skill Development Facilities

f. Teaching Learning Process

i. Curricula and syllabus for each of the programmes as approved by the

University

ii. Academic Calendar of the University

iii. Academic Time Table with the name of the Faculty members handling the

Course

iv. Teaching Load of each Faculty

v. Internal Continuous Evaluation System and place

vi. Student’s assessment of Faculty, System in place

g. For each Post Graduate Courses give the following:

i. Title of the Course


ii. Curricula and Syllabi

iii. Laboratory facilities exclusive to the Post Graduate Course

h. Special Purpose

i. Software, all design tools in case

ii. Academic Calendar and frame work

7. Enrollment of students in the last 3 years

8. List of Research Projects/ Consultancy Works

a. Number of Projects carried out, funding agency, Grant received

b. Publications (if any) out of research in last three years out of masters projects

c. Industry Linkage

d. MoUs with Industries (minimum 3)

9. LoA and subsequent EoA till the current Academic Year

10. Accounted audited statement for the last three years

11. Best Practices adopted, if any

Note: Suppression and/or misrepresentation of information shall invite appropriate penal action.

The Website shall be dynamically updated with regard to Mandatory Disclosures

pakur polytechnic (established by govt. of jharkhand and ... · ex-director, bit - sindri...

Documents