paladin accessory catalog 2015 03_06_
TRANSCRIPT
940 W. Oakland Ave, Suite A1, Oakland, FL 34787
(407) 614-8781 office, (407) 614-8782 fax
[email protected], www.PaladinMP.com
EQUIPMENT RAIL AND
ACCESSORIES CATALOG
“EVOLUTION”EQUIPMENT MANAGEMENT
RAIL SYSTEM
(407) 614-8781 office
INDEX PAGE
Description
Rail Overview, Specification, and Installation Instructions
DEM: Diagnostic Equipment Management
Infection Control Devices
Soap / Sanitizer / Wipes Mount
Paper Towels
Gloves
PPE
Sharps Containers
Baskets and Bins
Clips and Hooks
Shelves
Other Helpful Accessories
Installation photos
Management Application Brochure Overview Sheets
Key: Legend of symbols for elevation drawings
Page (s)
3-5
6-11
12-53
14-19
20-26
27-40
41-47
48-52
53-61
62-71
72-75
76-93
94-102
103-109
110-112
(407) 614-8781 office
“EVOLUTION” Equipment Management Rail: a seamless, extruded aluminum profile with clear anodized finish containing a groove for attaching an adapter that supports the Owner supplied specified hospital accessories and equipment and includes termination caps at each end. The groove and adapters are designed so that the adaptor requires a seven degree tilt for attachment. The rail is designed to accommodate a seamless Wilsonart laminate decorative color inlay the length of the rail up to ten feet in length.
“EVOLUTION” Equipment Management Rail shall be specified in one to ten foot lengths as shown on drawings or indicated on purchase order to accommodate room conditions. For lengths greater than ten feet, a JOINER piece is used to attach together multiple pieces of rail to meet the required total length.
“EVOLUTION” Equipment Management Rail is pre-drilled on sixteen-inch centers (minimum) with the exception of a one-foot rail length which has two mounting holes drilled at eight inches on center. The Rail may also be field drilled by the installer to accommodate specific job site conditions.
End caps shall be constructed of injected molded thermoplastic and shall resist most hospital cleaning and disinfecting chemicals. The color shall be white and molded throughout the material. End caps shall be friction-fit without use of fastening devices.
Decorative inlay shall be supplied by Paladin for installation by the owner or contractor. Inlay is Wilsonart laminate in the standard finish which will resist most hospital cleaning and disinfecting chemicals. Color shall specified by the Owner. Specialty coating finishes can be made available for additional cost and lead time. Alternate laminate manufacturers may be specified for additional cost and lead time. Contact manufacturer for details.
Option to powder coat rail with anti-microbial finish (AMF) in select colors. Contact manufacturer for details.
PART NUMBER: R-XXX
“EVOLUTION” Fairfield-Style Equipment Management Rail
DESCRIPTION:
(407) 614-8781 office
PALADIN “EVOLUTION”RAIL INSTALLATION OVERVIEW
Rail may be mounted to any surface or backing/wall type. Installer MUST use a MINUMUM of ¼” mounting hardware.
Contact manufacturer with any installation questions at number shown below.
Refer to the relevant elevation drawings and other specification documentation for quantity and location details for each project.
Stud Mount
Drywall Mount
1. Position and level the “Evolution” rail on the wall at the correct height and location as shown on the elevation drawings. Mark location on wall.
2. Align holes in rail with studs. If required, drill new holes into rail to align with stud locations.
3. Using a 1/4” x 2.5” sheet metal screw, securely fasten the screws through the rail and drywall and into the studs. Ensure a tight fit between rail and wall.
1. Position and level the “Evolution” rail on the wall at the correct height and location as shown on the elevation drawings. Mark location on wall.
2. Mark through each of the pre-drilled holes in the rail onto the drywall.
3. Remove the rail and securely install 1/4” toggle-type wall anchors in locations as marked.
4. Realign the rail holes with the installed wall anchors and tightly secure the rail to the wall with the 1/4” x 2.5”wall anchor machine screws. Ensure a tight fit between rail and wall.
Wall Anchor types A + B
(407) 614-8781 office
Diagnostic Equipment Management
(DEM prefix part numbers)
RAIL MOUNTING SOLUTIONS
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: DEM-106
Does not include Welch Allyn equipment
Suggested for use in conjunction with SM-101 BP cuff basket
Alternate mounting kits available for other manufacturer’s devices. Contact your sales representative.
Mounting kit for Welch Allyn aneroid BP sphygmomanometer (Tycos 509)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-101
To accommodate cuffs up to thigh-sized
Plastic coated wire U-shaped basket
7”H x 6.75”W x 4”D
Includes pre-installed rail mounting kit items described below
BP cuff basket with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: DEM-108
Mounting kit for Welch Allyn Ophthalmoscope (models 767/777)
Mounting kits also available for original model 747. Contact your sales representative.
Does not include Welch Allyn equipment
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: DEM-109
Mounting kit for Welch Allyn Specula holders
Does not includes dispenser
Fits new and old styles
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: DEM-110
Mounting kit for Welch Allyn “Sure Temp” thermometer (model 692)
Does not include Welch Allyn equipment
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: DEM-100-4
Does not include Welch Allyn equipment
Suggested for use in conjunction with SM-101 BP cuff basket
Alternate mounting kits available for other manufacturer’s devices. Contact your sales representative.
Complete set of rail, adapters and basket for components of the Welch Allyn 777 Diagnostic instruments
(407) 614-8781 office
Infection Control Devices(IC prefix part numbers)
RAIL MOUNTING SOLUTIONS FOR THE FOLLOWING:Soap / Sanitizer
Paper TowelsGloves / PPE
Sharps ContainersWipes Mount
PROBLEM: Per the CDC, many studies have shown that the bacteria that cause hospital-acquired infections are most frequently spread from one patient to another on the hands of healthcare workers.In 34 studies of hand washing, workers washed their hands only 40% of the time.
SOLUTION: Create a standard directional flow with easy access to sink and hand washing accessories at the room entry. “…placing the hand washing accessories on an equipment rail allows adjustment in the system without creating damage to the wall and potential home for pathogens.”
EVIDENCE BASED DESIGN VALIDATION
Published by The Center for Health Design 2011
(407) 614-8781 office
Soap/Sanitizer/Wipes DispensersRAIL MOUNTING SOULTIONS
We have rail mounting kits for every brand and model number.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-110
Does not includes dispenser
Universal rail mount kit for most wide body soap/sanitizer dispensers
Available with dispenser for turn-key installation. Contact your sales rep for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-111
Universal rail mount kit for most narrow body soap/sanitizer dispensersDoes not includes dispenser
Available with dispenser for turn-key installation. Contact your sales rep for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-114
Universal rail mount kit for Aerosol Foam Dispensers with Drip Pan Extension 17 oz. (Steris/ Ecolab)Does not includes dispenser or drip pan
Available with dispenser for turn-key installation. Contact your sales rep for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-117
Universal rail mount kit for Aerosol Foam Dispensers with Drip Pan Extension 9 oz. (Steris/ Ecolab)Does not includes dispenser or drip pan
Available with dispenser for turn-key installation. Contact your sales rep for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-112
Universal holder and rail mount kit for most brands of sanitizing wipesIncludes holder and pre-installed adapter
Holder is standard powder coat painted finish without anti-microbial compound
Also works to hold industrial style spray bottles
(407) 614-8781 office
Paper Towel DispensersRAIL MOUNTING SOLUTIONS
If it’s not one of these, just ask. We probably have that too.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-401
Mounts using (2) adapters. No adapter plate required. May be mounted in multiple locations to meet various field conditions.
Does not include dispenser
Mounting kit for most tri-fold paper towel holders
Available with dispenser for turn-key installation. Contact your sales rep for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-404
Does not include dispenser
Mounting kit for Kimberly Clark Professional (model 09990)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-409
Does not include dispenser
Mounting kit for Kimberly Clark Professional (model 09335)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-405
Does not include dispenser
Mounting kit for GA Pacific EnMotion paper towel dispensers (models 58487 and 58470)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-408
Does not include dispenser
Mounting kit for GA Pacific SofPull paper towel dispensers (models 52109, 58201, and 58217)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-411
Does not include dispenser
Mounting kit for GA Pacific SofPull paper towel dispensers (models 58487 and 58470)
(407) 614-8781 office
Gloves Box DispensersINCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT
Every type, size, and feed style. 1, 2, 3, or 4. Plastics, Metal, or Wire.Just ask. We have it.
(STAND-ALONE MOUNTING KITS FOR OWNER SUPPLIED DISPENSERS ARE AVAILABLE UPON REQUEST.)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-226HV
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Includes dispenser and pre-installed mounting kit
10.125”H x 17”W x 4.25”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Triple gloves box, ABS plastic with internal dividers
Customer to define mounting preference (horizontal or vertical) at time of order.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-262HV
Triple gloves box, matte polycarbonate plastic with internal dividersIncludes dispenser and pre-installed mounting kit
10.125”H x 17”W x 4.25”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-siteCustomer to define mounting preference (horizontal or vertical) at time of order.
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-264HV
Includes dispenser and pre-installed mounting kit
10.125”H x 5.75”W x 4.25”D (box only)
Vertical top feed or horizontal side feed application
Made to easily change orientation on-siteCustomer to define mounting preference (horizontal or vertical) at time of order.
Single gloves box, matte polycarbonate plastic
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-261HV
Quadruple gloves box, crystal clear PETG plastic with internal dividersIncludes dispenser and pre-installed mounting kit
10.125”H x 22.625”W x 4”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-siteCustomer to define mounting preference (horizontal or vertical) at time of order.
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-263HV
Double gloves box, crystal clear PETG plastic with internal dividersIncludes dispenser and pre-installed mounting kit
10.125”H x 11.375”W x 4”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-siteCustomer to define mounting preference (horizontal or vertical) at time of order.
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-235HV
Triple gloves box, wood grain finish ABS plastic with internal dividers
Actual color similar to Wilsonart: 10745-60 Foothill Pear
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Includes dispenser and pre-installed mounting kit10.125”H x 17”W x 4”D (box only) Horizontal top feed or vertical side feed applicationMade to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-236HV
Triple gloves box, wood grain finish ABS plastic with internal dividers
Actual color similar to Wilsonart: 7922-07 Brighton Walnut
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Includes dispenser and pre-installed mounting kit10.125”H x 17”W x 4”D (box only) Horizontal top feed or vertical side feed applicationMade to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-201HV
Single gloves box, non-anti-microbial powder-coated metalIncludes dispenser and pre-installed mounting kit
10”H x 5.625”W x 3.875”D (box only)
Vertical top feed or horizontal side feed application
Made to easily change orientation on-site
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Customer to define mounting preference (horizontal or vertical) at time of order.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-202HV
Double gloves box, non-anti-microbial powder-coated metalIncludes dispenser and pre-installed mounting kit
10”H x 10.625”W x 3.875”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
No internal dividers with this model. For internal dividers, consult your sales person.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-204HV
Triple gloves box, non-anti-microbial powder-coated metalIncludes dispenser and pre-installed mounting kit
10”H x 16”W x 3.875”D (box only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
No internal dividers with this model. For internal dividers, consult your sales person.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-203HV
Triple gloves box, non-anti-microbial powder-coated metalIncludes dispenser and pre-installed mounting kit
15.25”H x 7.75 - 11.25”W x 3.75”D (holder only)
Front feed application with adjustable width capability
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-210HV
Double gloves box, plastic coated wire
Includes dispenser and pre-installed mounting kit
8.25”H x 11”W x 3.75”D (holder only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-205HV
Quadruple gloves box, plastic coated wire
Includes dispenser and pre-installed mounting kit
21.75”H x 8.25”W x 3.75”D (holder only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Available as single, double, triple, or quadruple configuration. Ask your sales person for correct model numbers.
(407) 614-8781 office
PPE DispensersINCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT
If we don’t have an adapter kit already, we can make it for you.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-274
PPE dispensing cabinet, ABS and PETG plastic
Includes dispenser and pre-installed mounting kit with stand-off
Holds three boxes of gloves, two boxes of face masks, multi-fold towels, and patient bibs
Tabs on both sides of unit to hang patient bib clips
23.5”H x 17.625”W x 5”D (cabinet only)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-271
PPE dispensing cabinet, ABS plastic
Includes dispenser and pre-installed mounting kit
Holds two boxes of gloves, one box of face masks, and one hand sanitizer bottle
11.625”H x 18.5”W x 4.5”D (cabinet only)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-275HV
PPE dispenser, small, ABS plastic
Includes dispenser and pre-installed mounting kit
Universal small box dispenser – shoe cover, cap, and other items
5.75”H x 13.75”W x 7”D (dispenser only)
Horizontal top feed or vertical side feed application
Made to easily change orientation on-site
Customer to define mounting preference (horizontal or vertical) at time of order.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-276
PPE dispenser, large, ABS plastic
Includes dispenser and pre-installed mounting kit
Universal large box dispenser – shoe cover, cap, and other items
10.125”H x 12.55”W x 10”D (dispenser only)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-268
Stainless Steel Bulk Dispenser
Includes dispenser and pre-installed mounting kit
Single compartment with hinged lid holds a variety of personal protection apparel; including gloves, bouffant caps, shoe covers, etc.
11.125”H x 12.25”W x 5.75”D (dispenser only)
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-245
Face mask dispenser with mounting kitIncludes dispenser and pre-installed mounting kit
Holds one box of earloop face masks in bulk quantity
White ABS plastic and clear PETG plastic
5”H x 8.75”W x 4.375”D (dispenser only)
(407) 614-8781 office
Sharps ContainersRAIL MOUNTING SOLUTIONS
If we don’t have an adapter kit already, we can make it for you.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-303
Universal mounting kit for most large sharps containers (Kendall, Covidian, Bemis)Does not include sharps containerSpecific model number must be verified prior to order placement
Available with dispenser for turn-key installation. Contact your sales rep for details.
**
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-309
Mounting kit for Daniels “Sharpsmart” sharps container (S14 or S22) with lockable bracket mount Does not include sharps container
Available with dispenser for turn-key installation. Contact your sales rep for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-306
Mounting kit for Stericycle large sharps containerDoes not include sharps container
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IC-311
Mounting kit for BD sharps container (models 305447 and 305426)Does not include sharps container
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER:SM-101
To accommodate cuffs up to thigh-sized
Plastic coated wire U-shaped basket
7”H x 6.75”W x 4”D (basket only)
Includes pre-installed rail mounting kit items described below
BP cuff basket with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-102
Plastic coated wire basket
4.25”H x 10”W x 7”D (basket only)
Includes pre-installed rail mounting kit items described below
Small wire basket with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-103
Plastic coated wire basket and dividers
4.25”H x 18”W x 10”D (basket only)
Includes pre-installed rail mounting kit items described below
Large wire basket and (3) moveable dividers with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-104
Plastic coated wire basket
10”H x 16.25”W x 15.5”D / 23.5”D fully extended
Includes pre-installed rail mounting kit items described below
Medium deep wire bin on pull-out glide with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-105
Plastic coated wire basket
10”H x 23”W x 15.5”D / 23.5”D fully extended
Includes pre-installed rail mounting kit items described below
Large deep wire bin on pull-out glide with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-201
White plastic box with clear plastic bins
9.5”H x 23.75”W x 6.5”D (box only)
Includes pre-installed rail mounting adapters described below
3 bin tilt-out storage container with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-202
White plastic box with clear plastic bins
8.25”H x 23.75”W x 5.5”D (box only)
Includes pre-installed rail mounting adapters described below
4 bin tilt-out storage container with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-203
White plastic box with clear plastic bins
6.5”H x 23.75”W x 4.5”D (box only)
Includes pre-installed rail mounting adapters described below
5 bin tilt-out storage container with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-301
Hook and integrated mounting plate in a powder coat painted anti-microbial finish (AMF)
2.5”H x 1.5”W x 4.5”D
Includes pre-installed rail mounting adapter described below
Powder coated metal wire hook with integrated mounting plate and adapter
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-302
Hooks and integrated mounting plate in a powder coat painted anti-microbial finish (AMF)
2.5”H x 12”W x 4.5”D
Includes pre-installed rail mounting adapter described below
Powder coated triple metal wire hook with integrated mounting plate and adapter
Also available as: SM-307 with 2”D hooks or SM-308 with 0.75”D hooks
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-305
Hook and integrated mounting plate in a powder coat painted anti-microbial finish (AMF)
2.5”H x 1.5”W x 2”D
Includes pre-installed rail mounting adapter described below
Powder coated metal wire hook with integrated mounting plate and adapter
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-306
Hook and integrated mounting plate in a powder coat painted anti-microbial finish (AMF)
2.5”H x 1.5”W x 0.75”D
Includes pre-installed rail mounting adapter described below
Powder coated metal wire hook with integrated mounting plate and adapter
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-303
Hook and integrated mounting plate in a powder coat painted anti-microbial finish (AMF)2.5”H x 1.5”W x 2.5”DIncludes pre-installed rail mounting adapter described belowApron hangers not included
Lead apron powder coated metal hook with integrated mounting plate and adapter
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-304
Slide action loop and clip to secure cords, cables, and wires, or to hold stethoscope.
3.5”H x 1.5”W x 0.75”D
Includes pre-installed rail mounting adapter described below
Cord bundler with adapter
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-401
Plastic and metal clips on anti-microbial (AMF) powder coat painted back-plate
2.5”H x 22”W x 1”D
Includes pre-installed rail mounting adapters described below
6 clip organizer with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: SM-402
Plastic and metal clips on anti-microbial (AMF) powder coat painted back-plate
2.5”H x 9.75”W x 1”D
Includes pre-installed rail mounting adapters described below
3 clip organizer with mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER:
Also available in 24”L. Contact sales representative for details.
SM-406
Friction fit paper display rail. Release document by lifting bottom of sheet up towards ceiling.
2.5”H x 22”W x 1”D
Includes pre-installed rail mounting adapter described below
Paper display rail with mounting kit
(407) 614-8781 office
ShelvesINCLUDES ACCESSORY WITH ATTACHED RAIL MOUNT
Convenient fold down and stationary options. More available.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: S-203
Metal with anti-microbial (AMF) powder coat painted finish
14.5”W x 13.5”D
Includes 0.75” lip on 3 sides to secure item placement
Includes pre-installed rail mount adapters
Fixed shelf with lip edges, large
Also available in other sizes. Contact sales representative for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: S-216
Non-anti-microbial molded plastic with pencil edge groove to contain spills
14.75”W / 15.5”W (outside bracket to outside bracket) x 10”D
Pre-fabricated to include hardware and rail mounting adapter. Complete as shown.
Fold down shelf, medium
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: S-220
Molded plastic with embedded anti-microbial compound
24”W / 24.25”W (outside mounting bracket to outside mounting bracket) x 18”D
Pre-fabricated to include hardware and rail mounting adapter. Complete as shown.
Weight limit 30 lbs.
Fold down tray, large
(407) 614-8781 office
Other Helpful AccessoriesACCESSORIES AND RAIL MOUNTING SOLUTIONS
Remember, if you don’t see it, just ask for it.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: AC-109-PM
User adjustable width to accommodate most mobile devices
Includes one pair of brackets (left and right) with factory attached adapters
IPAD / Tablet / Mobile phone / Computer holder
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: AC-101
Includes pre-installed adapter
Metal vacuum bottle slide with mount
Also available in (AMF). Contact sales representative for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: GCX-101
To mount a variety of equipment
25”H x 4”W
Includes (2) pre-installed adapters
Customer to provide distance between rails
GXC channel to span (2) rails at 16-24” between rails
Optional available equipment and mounts. Contact sales representative for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: GCX-102
To mount a variety of equipment
31”H x 4”W
Includes (2) pre-installed adapters
Customer to provide distance between rails
GXC channel to span (2) rails at 20-28” between rails
Optional available equipment and mounts. Contact sales representative for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: GCX-103
To mount a variety of equipment such as swing-arm IV pole shown at right
47”H x 4”W
Includes (3) pre-installed adapters
Customer to provide distance between rails
GXC channel to span (3) rails at 20-28” between rails
Optional available equipment and mounts. Contact sales representative for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IM-201
36” infusion pump mounting pole with (2) adjustable tension clamps attached to pre-installed rail adapters. Also includes 20” telescoping height adjustable IV pole with integral 4-hook hanger.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IM-301
Infusion pump mounting swing arm for attachment of infusion pump and other pole-mount devices
Includes adjustable telescoping IV pole with 4 bag hanger
Does not include GCX channel
IV swing-arm holder with 4-hook IV bag hanger
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: IM-405
1”Dia. x 4”H aluminum pole on 5”D anti-microbial (AMF) powder-coat painted post
Pre-fabricated to include hardware and rail mounting adapter Complete as shown
Universal mount for any device with a C-clamp pole mount
Available with custom stand-off depth (greater or fewer than 5”) as defined by customer.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: OGB-101
Includes pre-installed rail mount adapter
Does not include flow meters
Duplex Oxygen block with DISS outlets
Available with Ohio, Chemtron, and 1/8” npt fittings. Available for Air and Vacuum. Contact sales representative for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: VM-201
Integrated blender mount is standard
Includes pre-installed rail mount adapters
Double ventilator manifold with DISS outlets, 2 Air and 2 Oxygen
Available in 3/3 DISS configuration. Available with Chemtron or Ohmeda outlets. Contact your sales rep for details.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: AC-105
Includes wire metal holder and pre-installed rail mount adapter
Does not include cylinder tank
Oxygen cylinder mount for D or E tank cylinders
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: LM-101
Anti-microbial powder coat pained finish (AMF) machined metal post with integrated Allen screw to secure light into post-hole
Includes pre-installed rail mount adapter
Waldmann light mount for Owner provided light
Available complete with Waldmann Halux LED 20 light for turn-key installation.
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: AC-110
Includes pre-installed rail mount adapter
Telephone mount for standard wall mounted telephones
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: A-112
CareFusion Razor mount for Owner provided razor
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: AC-106-PM
Includes waste basket
Rail mount kit for 12 Qt. small vanity waste basket (Rubbermaid).
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: CF-103
For quick and stable mounting of C-Frame to the “Evolution” Fairfield-style rail and to the Paladin “Rapidus” cart.
Does not include C-Frame unit.
Herman Miller C-Frame rail mounting kit
Mounts to “EVOLUTION,” Fairfield-style Medical Equipment Management Rail using a snap action adapter with positive snap attachment lock feature.
Integrated Allen screws provide the ability to lock the adapter in place on rail. Standard adapters are plastic with embedded anti-microbial compound. Some accessories requiring heavy-duty capacity will be provided with extruded aluminum
adapter(s) for added strength. Adapter Plates are aluminum with an anti-microbial powder coat painted finish (AMF).
940 W. Oakland Ave, Suite A1
Oakland, FL 34787
(407) 614-8781 ph | (407) 641-8782 fax
www.paladinmp.com | [email protected]
DESCRIPTION:
PART NUMBER: CF-101
Add equipment rail to Herman miler C-Frame for easy mounting of accessories to side of C-Frame unit.
Does not include C-Frame unit.
Herman Miller C-Frame side rail kit
(407) 614-8781 office
“EVOLUTION”The Fairfield-Style
Medical Equipment Rail
APPLICATIONS
Installation Photos
(407) 614-8781 office
APPLICATIONSLEAN Inventory management and Improved Infection Control
