panasonic
TRANSCRIPT
![Page 1: Panasonic](https://reader036.vdocuments.net/reader036/viewer/2022082309/54764e72b4af9fa3328b45b8/html5/thumbnails/1.jpg)
I n s t a l l a t i o nInstructions
Mode I No. KX-T30866Door Opener Adaptor
PanasonicPlease read before connection.
![Page 2: Panasonic](https://reader036.vdocuments.net/reader036/viewer/2022082309/54764e72b4af9fa3328b45b8/html5/thumbnails/2.jpg)
1 Loosen the-screw and remove the cover.
2 Loosen the screws.
3I
To Door
To Door
Cord Strap,
Opener
Opener
2
IDOOR 1 DOOR 2
Tighten the screws after connecting it withthe wires coming from the door openersthen, tighten the cords with the cord strap(included).
4 Put the cover in position and tighten thescrew.
1 2
![Page 3: Panasonic](https://reader036.vdocuments.net/reader036/viewer/2022082309/54764e72b4af9fa3328b45b8/html5/thumbnails/3.jpg)
5 INSTALLATION1 Connecting to KX-T123211 D
0Door OpenerAdaptor(KX-T30866)
Fix the door opener adaptor on top ofthe doorphone adaptor.
KX-T30866
Insert the plug comingfrom the door openeradaptor into the jackon the CPU card.
Connecting to KX-T616lO andKX-T30810
_Door Opener Adaptor (KX-T30866)
4
![Page 4: Panasonic](https://reader036.vdocuments.net/reader036/viewer/2022082309/54764e72b4af9fa3328b45b8/html5/thumbnails/4.jpg)
,
KX-T123211DT61610T308 10
1DoorOpenerKX-T30866Adaptor
AC1 20V I
Power
q
SUPPlY
AC1 20V
,PowerSUPPlY
DoorOpener
Note:0 Power Supply, Door Opener and Wiring are
not included of the Door Opener Adaptor,KX-T30866.
0 For wiring, it is recommended to useAWG22 twisted wire or thicker wire.
l The relay contact is able to operate withMAX 50V AC, 1 A or MAX 30V DC, 1 A.
0 Doorphone 1 must be paired with DoorOpener 1 and the same with Doorphone 21and Door Opener 2.
6