panasonic g-series blue - davies craigm6ga 10xm* additional gearbox m6ga 10xm must be used for...

Panasonic G-series

Small ac geared motors & brake motors

ideas in motion

2

Panasonic, one of the largest motor manufacturers in the

world, have designed and developed the G-series range

of geared motors. Covering powers from 6 to 90W, these

units are now established in a worldwide market with a

reputation for quality, value and long life.

➤ Sealed for life, grease filled gearboxes

offer a long and maintenance free service life

➤ Helical spur gearboxes ensure quiet,

efficient running➤ Speed range from 500r/min down to

0.7r/min➤ Fixed speed and variable speed

models available➤ Universal mounting

➤ Proven quality and reliability

Other models available➤ Geared motors for 110V and 60Hz supply

➤ IP65 protection on 1 and 3 phase geared

motors 25 to 60W➤ IP67 protection for severe washdown

environments

➤ B1-series with integrated drive and IP65

enclosure

➤ B3-series with integrated drive, IP65 enclosure

and positioning capabilities

Panasonic G-series geared motors

ConstructionThe Panasonic G-series motors are designed for 1 or 3

phase supply. The 6-40W models are all self cooled and

the 60 and 90W units are supplied with a cooling fan.

Gearboxes use a combination of helical and spur gears

for high speed efficient running and are grease lubricat-

ed. Standard ratios of 3:1 to 200:1. However, where

higher ratios and lower speeds are required, an interme-

diate 10:1 decimal gearbox is available.

ApplicationsConveyorsFood machineryPackagingPumpsLabellingTest equipment

Range overview1 phaseGeared motors suitable for fixed speed run-ning in a power range 6 to 90W.

Quick reversingSingle phase input geared motors with a built-in constant friction brake that reduces overrun.

3 phaseGeared motors ranging from 25-90W. The230V versions suit variable speed running withan inverter. The 400V versions are designed tobe connected directly to 3 phase supplies.

Brake motorGeared motors with an integrated springapplied brake for 1 or 3 phase 230V supply.

Micro-inverterA compact digital inverter offering 30:1 speedrange on all 230V 3 phase motors.Alternatively, the Lenze smd inverter is avail-able for applications that require greater func-tionality.

6W to 90W

3

Page Index1 phase standard induction & quick reversible motors 6-19

3 phase induction motors 20-29

1 phase & 3 phase brake motors 30-39

Micro inverter 40-43

Feet options 44-45

Motor data 46

Part numbers 47-48

Gearbox data & filtting instructions 49

Panasonic G-series geared motors

Type of load Application Service factor5 h/day 8 h/day 24 h/day

Constant Belt conveyor, Film winding0.8 1.0 1.5One-way operation

Light impact Start/Stop/Cam operation 1.2 1.5 2.0

Medium impactInstant Reverse operation with Reversible motor

1.5 2.0 2.5Instant stall operation with brake pack

Heavy impactRepetition of medium impact

Instant stall of the motor at vibrating material 2.0 ~ 2.5 2.5 ~ 3.0 3.0 ~ 3.5

Service factorsTo maintain the life of the geared motor, a service factor must be selected which is dependent upon type of load andduty. From the below table, examples are given of typical applications. For example, under constant load a servicefactor of 1.0 should be used.

Actual speedsThe actual output speeds under rated torque is typically 10-20%less than the nominal speed. Motor speed – torque curves givethe motor full load rated speed and indication of how speedvaries with load. Nominal speeds are based on a motor nominalspeed of 1500 r/min.

Brake motorsPanasonic G-series brake motors feature a built-in spring appliedelectromagnetic brake. This reduces stopping times and gives astatic holding torque.

Motor overrun is normally 2-4 revolutions and the brake is ratedfor 6 operations per minute.See pages 30-39.

Quick reversible motorsWhen you turn off the power to the Reversible motor, brakingtorque will be generated due to a built-in constant friction braking system.

The revolutions the motor makes until it completely stops aredescribed as overrun. A holding load torque reduces and a driv-ing load torque increases the overrun. The overrun values in thetable are for induction purposes only and do not include gearboxratio or load inertia.See pages 6-19.

Output Braking torque Overrun(W) (Ncm) (revolution)

6 0.59 5.0

15 1.27 4.5

25 1.47 5.5

40 3.92 6.0

60 3.92 6.0

90 3.92 6.0

4

1 phase standard induction motors (pages 6-19)

➤ continuous rating S1

➤ thermally or impedance protected

➤ class E insulation

For constant speed applications, Panasonic offer a range of standard induction and and brake motors for both single and threephase voltage supplies plus quick reversible motors for single phase supplies.

1 phase quick reversible motors (pages 6-19)

➤ built-in constant friction braking system

➤ reduced overrun and fast stopping

➤ ideal for quick reversing or stop/start applications

A friction plate attached to the end of the rotor is constantly underfriction via four cylindrical brake pads and springs. The resultingbraking torque is continuously applied to the motor even duringmotor running. When power is removed, this friction results infaster stopping of the motor.

3 phase induction motors (pages 20-29)

➤ continuous rating S1

➤ thermally protected

➤ class E insulation

Three phase induction motors deliver improved torque perform-ance over single phase models.

The 230V versions suit variable speed running with thePanasonic Micro-Inverter. The 400V versions are designed to beconnected directly to 3 phase supplies.

1 & 3 phase brake motors (pages 30-39)

➤ spring applied electromagnetic brake

➤ built-in rectifier

➤ gives static holding torque with power off

The brake releases automatically when the motor is powered,leaving no residual torque. When the motor is switched off thebrake re-engages. Motor overun is typically 2-4 revolutions andthe brake is rated for six operations per minute.

Panasonic G-series fixed speed solutions

All the induction motors in the G-Series range are highly efficientand quiet in operation. The same high quality design and basicconstruction is used throughout the range. All motors are 4 polewith a nominal speed of 1500 r/min at 50 Hz.

5

If variable speed is required the 230V 3 phase geared motors can be used with the Panasonic Micro-inverter. This combinationoffers excellent speed/torque characteristics and good dynamic motor performance. If greater functionality is required, theLenze smd inverter offers further options including its unique EPM memory chip.

Micro-Inverter (pages 40-43)The Panasonic Micro-Inverter can be used with any 3phase motor, rated for 230V operation.

There are two versions available: one suitable for the 25and 40W motors and another for the 60 and 90W motors.

Features include built-in or external speed potentiometer,dynamic braking and acceleration/deceleration ramp.

Panasonic G-series variable speed solutions

smd inverterDesigned for general purpose applications, Lenze smdinverters offer compact design, simple installation andfast set-up.

The smd model ESMD251X2SAF has a rated outputpower of 0.25kW and suits any G-series geared motorsrated for 230V 3 phase input. This inverter input is 180-264V, 48-62Hz, Dimensions are 93 wide x 146 high x 83deep.

Features include up to 3 pre-set jog speeds, voltage boost,dc injection braking, adjustable chopper frequencybetween 4 and 10Hz, digital and analog inputs and relayoutput.

Options

➤ DIN rail mounting kit ESMD093DR

➤ Pack of EPM memory chips ESMD01BP

➤ EPM programmer, battery powered ESMD01EP

For more information see www.lenze.co.uk underProducts/Frequency inverters.

➤ Integrated RFI filter

➤ Innovative EPM plug-in memory chip

➤ Compliant CE, UL, cUL

➤ Quick commissioning, integrated

keypad and pre-configured settings➤ Options of DIN rail mounting, dc

braking and remote keypad

➤ Excellent speed/torque characteristics

➤ Large speed range

➤ Suits 3 phase 230V motors; 25-90W

➤ Simple set up and operation

AccessoriesThe smd drive features the innovative EPM memory chipwhich contains the entire drive and motor configuration.The EPM can easily be removed and replaced for fast andefficent program changes, saving time and money.

The EPM programmer is battery powered and will copy anEPM chip in less than 2 seconds. You can also copy from afile to an EPM, and edit/create smd programs. A RS232port for PC operation is included.

6

Standard induction motors suit fixed speed applica-tions.

Quick reversing motors have a built-in braking system-for reduced overrun and fast reversing.

Panasonic G-series 6W 1 phase Standard & Quick Reversible

➤ Rated 230V ± 10% and 50 Hz

➤ Continuous duty S1

➤ Enclosure IP22 (cable downwards)

➤ Class E insulation

➤ Supplied with 0.6µF run capacitor

➤ Thermal protection by impedance

current limiting➤ approved, UL on request

Standard Induction Motor Quick Reversible MotorModel Number : M6IA6G4GE Model Number : M6RA6G4GE

Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @230V Nm number L kg500 M6GA 3B 408 0.11 PAN GS 006 IGE 500.0 A L1 408 0.11 PAN GS 006 RGE 500.0 A L1 133300 M6GA 5B 245 0.18 PAN GS 006 IGE 300.0 A L1 245 0.18 PAN GS 006 RGE 300.0 A L1 133200 M6GA 7.5B 163 0.27 PAN GS 006 IGE 200.0 A L1 163 0.27 PAN GS 006 RGE 200.0 A L1 133150 M6GA 10B 123 0.33 PAN GS 006 IGE 150.0 A L1 123 0.33 PAN GS 006 RGE 150.0 A L1 133100 M6GA 15B 82 0.5 PAN GS 006 IGE 100.0 A L1 82 0.5 PAN GS 006 RGE 100.0 A L1 13375 M6GA 20B 61 0.66 PAN GS 006 IGE 075.0 A L1 61 0.66 PAN GS 006 RGE 075.0 A L1 14260 M6GA 25B 49 0.83 PAN GS 006 IGE 060.0 A L1 49 0.83 PAN GS 006 RGE 060.0 A L1 142

1.050 M6GA 30B 41 1.0 PAN GS 006 IGE 050.0 A L1 41 1.0 PAN GS 006 RGE 050.0 A L1 14230 M6GA 50B 25 1.7 PAN GS 006 IGE 030.0 A L1 25 1.7 PAN GS 006 RGE 030.0 A L1 14220 M6GA 75B* 16.3 2.3 PAN GS 006 IGE 020.0 A L1 16.3 2.3 PAN GS 006 RGE 020.0 A L1 14215 M6GA 100B* 12.3 2.5 PAN GS 006 IGE 015.0 A L1 12.3 2.5 PAN GS 006 RGE 015.0 A L1 142

12.5 M6GA 120B* 10.2 2.5 PAN GS 006 IGE 012.5 A L1 10.2 2.5 PAN GS 006 RGE 012.5 A L1 14210 M6GA 150B* 8.2 2.5 PAN GS 006 IGE 010.0 A L1 8.2 2.5 PAN GS 006 RGE 010.0 A L1 1428.3 M6GA 180B* 6.8 2.5 PAN GS 006 IGE 008.3 A L1 6.8 2.5 PAN GS 006 RGE 008.3 A L1 142

M6GA 10XM* Additional gearbox M6GA 10XM must be used for speeds of 7.5 r/min and below7.5 M6GA 20B* 6.1 2.5 PAN GS 006 IGE 007.5 A L1 6.1 2.5 PAN GS 006 RGE 006.0 A L1 1656.0 M6GA 25B* 4.9 2.5 PAN GS 006 IGE 006.0 A L1 4.9 2.5 PAN GS 006 RGE 006.0 A L1 1655.0 M6GA 30B* 4.1 2.5 PAN GS 006 IGE 005.0 A L1 4.1 2.5 PAN GS 006 RGE 005.0 A L1 1653.0 M6GA 50B* 2.5 2.5 PAN GS 006 IGE 003.0 A L1 2.5 2.5 PAN GS 006 RGE 003.0 A L1 1652.0 M6GA 75B* 1.6 2.5 PAN GS 006 IGE 002.0 A L1 1.6 2.5 PAN GS 006 RGE 002.0 A L1 165 1.21.5 M6GA 100B* 1.2 2.5 PAN GS 006 IGE 001.5 A L1 1.2 2.5 PAN GS 006 RGE 001.5 A L1 1651.3 M6GA 120B* 1.0 2.5 PAN GS 006 IGE 001.3 A L1 1.0 2.5 PAN GS 006 RGE 001.3 A L1 1651.0 M6GA 150B* 0.8 2.5 PAN GS 006 IGE 001.0 A L1 0.8 2.5 PAN GS 006 RGE 001.0 A L1 1650.8 M6GA 180B* 0.7 2.5 PAN GS 006 IGE 000.8 A L1 0.7 2.5 PAN GS 006 RGE 000.8 A L1 165

* torque limiter recommended

1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48.

M6GA gearbox

7

32

12

ø8

h7 ø25

26

ø62

L

75

CABLE 300mm

60

(49.5)

10

CT

RS

4xM4 ON 70 PCD

7

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0 0 500 1000 1500 2000

Speed (r/min)

Nm

230 V

Rated current 0.08 A

Starting current 0.12 A

Input power 19 W

Rated speed 1225 r/min

Motor speed-torque curve

230 V



Input power 22 W



0.07

0.06

0.05

0.04

0.03

0.02

0.01

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

Standard induction Quick reversible

6W1 phase

8


Quick reversing motors have a built-in braking systemfor reduced overrun and fast reversing.


➤ Rated 230V ± 10% and 50 Hz




➤ Supplied with run capacitor (standard

1.2µF, 1.0µF for Quick Reversible)➤ Integrated thermal protection switch

(For external connection)➤ approved, UL on request


Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @230V Nm number L kg500 M7GA 3B 408 0.27 PAN GS 015 IGE 500.0 A L1 408 0.27 PAN GS 015 RGE 500.0 A L1 144300 M7GA 5B 245 0.45 PAN GS 015 IGE 300.0 A L1 245 0.45 PAN GS 015 RGE 300.0 A L1 144200 M7GA 7.5B 163 0.67 PAN GS 015 IGE 200.0 A L1 163 0.67 PAN GS 015 RGE 200.0 A L1 144150 M7GA 10B 123 0.83 PAN GS 015 IGE 150.0 A L1 123 0.83 PAN GS 015 RGE 150.0 A L1 144100 M7GA 15B 82 1.24 PAN GS 015 IGE 100.0 A L1 82 1.24 PAN GS 015 RGE 100.0 A L1 14475 M7GA 20B 61 1.65 PAN GS 015 IGE 075.0 A L1 61 1.65 PAN GS 015 RGE 075.0 A L1 15460 M7GA 25B 49 2.1 PAN GS 015 IGE 060.0 A L1 49 2.1 PAN GS 015 RGE 060.0 A L1 154

1.650 M7GA 30B 41 2.5 PAN GS 015 IGE 050.0 A L1 41 2.5 PAN GS 015 RGE 050.0 A L1 15430 M7GA 50B 25 4.1 PAN GS 015 IGE 030.0 A L1 25 4.1 PAN GS 015 RGE 030.0 A L1 15420 M7GA 75B* 16.3 4.9 PAN GS 015 IGE 020.0 A L1 16.3 4.9 PAN GS 015 RGE 020.0 A L1 15415 M7GA 100B* 12.3 4.9 PAN GS 015 IGE 015.0 A L1 12.3 4.9 PAN GS 015 RGE 015.0 A L1 154

12.5 M7GA 120B* 10.2 4.9 PAN GS 015 IGE 012.5 A L1 10.2 4.9 PAN GS 015 RGE 012.5 A L1 15410 M7GA 150B* 8.2 4.9 PAN GS 015 IGE 010.0 A L1 8.2 4.9 PAN GS 015 RGE 010.0 A L1 1548.3 M7GA 180B* 6.8 4.9 PAN GS 015 IGE 008.3 A L1 6.8 4.9 PAN GS 015 RGE 008.3 A L1 154

M7GA 10XM* Additional gearbox M7GA 10XM must be used for speeds of 7.5 r/min and below7.5 M7GA 20B* 6.1 4.9 PAN GS 015 IGE 007.5 A L1 6.1 4.9 PAN GS 015 RGE 006.0 A L1 1806.0 M7GA 25B* 4.9 4.9 PAN GS 015 IGE 006.0 A L1 4.9 4.9 PAN GS 015 RGE 006.0 A L1 1805.0 M7GA 30B* 4.1 4.9 PAN GS 015 IGE 005.0 A L1 4.1 4.9 PAN GS 015 RGE 005.0 A L1 1803.0 M7GA 50B* 2.5 4.9 PAN GS 015 IGE 003.0 A L1 2.5 4.9 PAN GS 015 RGE 003.0 A L1 1802.0 M7GA 75B* 1.6 4.9 PAN GS 015 IGE 002.0 A L1 1.6 4.9 PAN GS 015 RGE 002.0 A L1 180 2.01.5 M7GA 100B* 1.2 4.9 PAN GS 015 IGE 001.5 A L1 1.2 4.9 PAN GS 015 RGE 001.5 A L1 1801.3 M7GA 120B* 1.0 4.9 PAN GS 015 IGE 001.3 A L1 1.0 4.9 PAN GS 015 RGE 001.3 A L1 1801.0 M7GA 150B* 0.8 4.9 PAN GS 015 IGE 001.0 A L1 0.8 4.9 PAN GS 015 RGE 001.0 A L1 1800.8 M7GA 180B* 0.7 4.9 PAN GS 015 IGE 000.8 A L1 0.7 4.9 PAN GS 015 RGE 000.8 A L1 180

M7GA gearbox



9

32

ø10

h7

ø30

25

27

CABLE 300mm

L

80

ø72

70

(58)

11.5

CT

RS

15

4

4xM5 ON 82 PCD

230 V



Input power 34 W



230 V



Input power 38 W




0.15

0.125

0.1

0.075

0.05

0.025

0 0 250 500 750 1000 1250 1500 1750 2000

Speed (r/min)

Nm

0.15

0.125

0.10

0.075

0.05

0.025

0 0 250 500 750 1000 1250 1500 1750 2000

Speed (r/min.)

Nm

15W1 phase

10



➤ Rated 230V ± 10% and 50 Hz


➤ Enclosure IP54


➤ Supplied with run capacitor (1.5µF

for standard, 1.8µF for Quick Reversible)

➤ Integrated thermal protection switch



Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @230V Nm number L kg500 M8GA 3B 408 0.44 PAN GS 025 IGE 500.0 A K1 417 0.46 PAN GS 025 RGE 500.0 A K1 149300 M8GA 5B 245 0.73 PAN GS 025 IGE 300.0 A K1 250 0.77 PAN GS 025 RGE 300.0 A K1 149200 M8GA 7.5B 163 1.1 PAN GS 025 IGE 200.0 A K1 167 1.15 PAN GS 025 RGE 200.0 A K1 149150 M8GA 10B 123 1.35 PAN GS 025 IGE 150.0 A K1 125 1.5 PAN GS 025 RGE 150.0 A K1 149100 M8GA 15B 82 2.0 PAN GS 025 IGE 100.0 A K1 83 2.1 PAN GS 025 RGE 100.0 A K1 14975 M8GA 20B 61 2.7 PAN GS 025 IGE 075.0 A K1 63 2.9 PAN GS 025 RGE 075.0 A K1 15960 M8GA 25B 49 3.4 PAN GS 025 IGE 060.0 A K1 50 3.6 PAN GS 025 RGE 060.0 A K1 15950 M8GA 30B 41 4.1 PAN GS 025 IGE 050.0 A K1 42 4.3 PAN GS 025 RGE 050.0 A K1 159 2.530 M8GA 50B 25 6.8 PAN GS 025 IGE 030.0 A K1 25 7.1 PAN GS 025 RGE 030.0 A K1 15920 M8GA 75B* 16.3 7.8 PAN GS 025 IGE 020.0 A K1 16.7 7.8 PAN GS 025 RGE 020.0 A K1 15915 M8GA 100B* 12.3 7.8 PAN GS 025 IGE 015.0 A K1 12.5 7.8 PAN GS 025 RGE 015.0 A K1 159

12.5 M8GA 120B* 10.2 7.8 PAN GS 025 IGE 012.5 A K1 10.4 7.8 PAN GS 025 RGE 012.5 A K1 15910 M8GA 150B* 8.2 7.8 PAN GS 025 IGE 010.0 A K1 8.3 7.8 PAN GS 025 RGE 010.0 A K1 1598.3 M8GA 180B* 6.8 7.8 PAN GS 025 IGE 008.3 A K1 6.9 7.8 PAN GS 025 RGE 008.3 A K1 159

M8GA 10XM* Additional gearbox M8GA 10XM must be used for speeds of 7.5 r/min and below7.5 M8GA 20B* 6.1 7.8 PAN GS 025 IGE 007.5 A K1 6.3 7.8 PAN GS 025 RGE 006.0 A K1 1866.0 M8GA 25B* 4.9 7.8 PAN GS 025 IGE 006.0 A K1 5 7.8 PAN GS 025 RGE 006.0 A K1 1865.0 M8GA 30B* 4.1 7.8 PAN GS 025 IGE 005.0 A K1 4.2 7.8 PAN GS 025 RGE 005.0 A K1 1863.0 M8GA 50B* 2.5 7.8 PAN GS 025 IGE 003.0 A K1 2.5 7.8 PAN GS 025 RGE 003.0 A K1 1862.0 M8GA 75B* 1.6 7.8 PAN GS 025 IGE 002.0 A K1 1.7 7.8 PAN GS 025 RGE 002.0 A K1 186 2.91.5 M8GA 100B* 1.2 7.8 PAN GS 025 IGE 001.5 A K1 1.3 7.8 PAN GS 025 RGE 001.5 A K1 1861.3 M8GA 120B* 1.0 7.8 PAN GS 025 IGE 001.3 A K1 1.0 7.8 PAN GS 025 RGE 001.3 A K1 1861.0 M8GA 150B* 0.8 7.8 PAN GS 025 IGE 001.0 A K1 0.8 7.8 PAN GS 025 RGE 001.0 A K1 1860.8 M8GA 180B* 0.7 7.8 PAN GS 025 IGE 000.8 A K1 0.7 7.8 PAN GS 025 RGE 000.8 A K1 186


M8GA gearbox


1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.

11

26

ø30

10ø

h7

25

32 1

L

85

ø82

75 30 MAX

11.5

80

(66.5)

CT

RS

15

4xM5 ON 94 PCD

444

67

00 500 1000 1500 2000

1.0

1.5

0.5

2.0

2.5

3.0

Speed (r/min.)

Nm

230 V



Input power 50 W



230 V



Input power 57 W



00 500 1000 1500 2000

1.0

1.5

0.5

2.0

2.5

3.0

Speed (r/min.)

Nm


25W1 phase

12



Standard Induction Motor Quick Reversible MotorModel Number : M9IA40K4GE Model Number : M9RA40K4GE

Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @230V Nm number L kg500 M9GA 3B 400 0.75 PAN GS 040 IGE 500.0 A K1 392 0.8 PAN GS 040 RGE 500.0 A K1 179300 M9GA 5B 240 1.26 PAN GS 040 IGE 300.0 A K1 235 1.3 PAN GS 040 RGE 300.0 A K1 179200 M9GA 7.5B 160 1.9 PAN GS 040 IGE 200.0 A K1 157 2.0 PAN GS 040 RGE 200.0 A K1 179150 M9GA 10B 120 2.3 PAN GS 040 IGE 150.0 A K1 118 2.5 PAN GS 040 RGE 150.0 A K1 179100 M9GA 15B 80 3.5 PAN GS 040 IGE 100.0 A K1 78 3.7 PAN GS 040 RGE 100.0 A K1 17975 M9GA 20B 60 4.7 PAN GS 040 IGE 075.0 A K1 59 5.0 PAN GS 040 RGE 075.0 A K1 19760 M9GA 25B 48 5.8 PAN GS 040 IGE 060.0 A K1 47 6.2 PAN GS 040 RGE 060.0 A K1 197

4.050 M9GA 30B 40 7.0 PAN GS 040 IGE 050.0 A K1 39 7.4 PAN GS 040 RGE 050.0 A K1 19730 M9GA 50B 24 9.8 PAN GS 040 IGE 030.0 A K1 24 9.8 PAN GS 040 RGE 030.0 A K1 19720 M9GA 75B* 16 9.8 PAN GS 040 IGE 020.0 A K1 16 9.8 PAN GS 040 RGE 020.0 A K1 19715 M9GA 100B* 12 9.8 PAN GS 040 IGE 015.0 A K1 12 9.8 PAN GS 040 RGE 015.0 A K1 197

12.5 M9GA 120B* 10 9.8 PAN GS 040 IGE 012.5 A K1 12 9.8 PAN GS 040 RGE 012.5 A K1 19710 M9GA 150B* 8 9.8 PAN GS 040 IGE 010.0 A K1 9.8 9.8 PAN GS 040 RGE 010.0 A K1 1978.3 M9GA 180B* 6.7 9.8 PAN GS 040 IGE 008.3 A K1 6.5 9.8 PAN GS 040 RGE 008.3 A K1 197

M9GA 10XM* Additional gearbox M9GA 10XM must be used for speeds of 7.5 r/min and below7.5 M9GA 20B* 6.0 9.8 PAN GS 040 IGE 007.5 A K1 5.9 9.8 PAN GS 040 RGE 006.0 A K1 2296.0 M9GA 25B* 4.8 9.8 PAN GS 040 IGE 006.0 A K1 4.7 9.8 PAN GS 040 RGE 006.0 A K1 2295.0 M9GA 30B* 4.0 9.8 PAN GS 040 IGE 005.0 A K1 3.9 9.8 PAN GS 040 RGE 005.0 A K1 2293.0 M9GA 50B* 2.4 9.8 PAN GS 040 IGE 003.0 A K1 2.4 9.8 PAN GS 040 RGE 003.0 A K1 2292.0 M9GA 75B* 1.6 9.8 PAN GS 040 IGE 002.0 A K1 1.6 9.8 PAN GS 040 RGE 002.0 A K1 229 4.71.5 M9GA 100B* 1.2 9.8 PAN GS 040 IGE 001.5 A K1 1.2 9.8 PAN GS 040 RGE 001.5 A K1 2291.3 M9GA 120B* 1.0 9.8 PAN GS 040 IGE 001.3 A K1 1.0 9.8 PAN GS 040 RGE 001.3 A K1 2291.0 M9GA 150B* 0.8 9.8 PAN GS 040 IGE 001.0 A K1 0.8 9.8 PAN GS 040 RGE 001.0 A K1 2290.8 M9GA 180B* 0.7 9.8 PAN GS 040 IGE 000.8 A K1 0.7 9.8 PAN GS 040 RGE 000.8 A K1 229

➤ Rated 230V ± 10% and 50 Hz

➤ Standard induction motor rated

continuous duty S1➤ Quick reversing motor rated

intermittent duty S2➤ Enclosure IP54


➤ Supplied with run capacitor

(Standard induction 2.5 µF, quick reversible 3.0µF)


(For external connection)

➤ approved, UL on request


M9GA gearbox



0.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

13

27

ø12

h7

ø36

25

32

L105

ø92

1 75 30 MAX13.5

90

(73.5)

18

CT

RS

4xM6 ON 104 PCD

4 44

67

230 V



Input power 79 W



230 V



Input power 94 W




duty S20.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

40W1 phase

14

Ordering specification and exampleReplace the letter # from the assembly number with a ‘C’ for flanged gearbox or ‘D’ for square gearbox as required. Examples:

100 r/min flanged with standard induction motor PAN GS 060 IGE 100.0 C K15 r/min square with quick reversible motor PAN GS 060 RGE 005.0 D K1

See page 48 for terminal box positions and feet.

HIGHER TORQUES – available from 30 r/min and slower speeds, see following 60W high torque pages.


Quick reversing motors have a built-in braking systemfor reduced overrun and fast reversing. Both models areavailable with flanged or square gearboxes.

Standard Induction Motor Quick Reversible MotorModel Number : M9IC60GK4GE Model Number : M9RC60GK4GE

Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @230V Nm number L kg500 M9G# 3B 408 1.1 PAN GS 060 IGE 500.0 # K1 433 1.1 PAN GS 060 RGE 500.0 # K1 225300 M9G# 5B 245 1.9 PAN GS 060 IGE 300.0 # K1 260 1.8 PAN GS 060 RGE 300.0 # K1 225200 M9G# 7.5B 163 2.9 PAN GS 060 IGE 200.0 # K1 173 2.7 PAN GS 060 RGE 200.0 # K1 225150 M9G# 10B 123 3.5 PAN GS 060 IGE 150.0 # K1 130 3.35 PAN GS 060 RGE 150.0 # K1 225100 M9G# 15B 82 5.3 PAN GS 060 IGE 100.0 # K1 87 5 PAN GS 060 RGE 100.0 # K1 22575 M9G# 20B 61 6.6 PAN GS 060 IGE 075.0 # K1 65 6.2 PAN GS 060 RGE 075.0 # K1 22560 M9G# 25B 49 8.2 PAN GS 060 IGE 060.0 # K1 52 7.7 PAN GS 060 RGE 060.0 # K1 225

4.550 M9G# 30B 41 9.9 PAN GS 060 IGE 050.0 # K1 43 9.2 PAN GS 060 RGE 050.0 # K1 22530 M9G# 50B 25 16.5 PAN GS 060 IGE 030.0 # K1 26 15.4 PAN GS 060 RGE 030.0 # K1 22520 M9G# 75B* 16.3 19.6 PAN GS 060 IGE 020.0 # K1 17.3 19.6 PAN GS 060 RGE 020.0 # K1 22515 M9G# 100B* 12.3 19.6 PAN GS 060 IGE 015.0 # K1 13.0 19.6 PAN GS 060 RGE 015.0 # K1 225

12.5 M9G# 120B* 10.2 19.6 PAN GS 060 IGE 012.5 # K1 10.8 19.6 PAN GS 060 RGE 012.5 # K1 22510 M9G# 150B* 8.2 19.6 PAN GS 060 IGE 010.0 # K1 8.7 19.6 PAN GS 060 RGE 010.0 # K1 2257.5 M9G# 200B* 6.1 19.6 PAN GS 060 IGE 007.5 # K1 6.5 19.6 PAN GS 060 RGE 007.5 # K1 225

M9GC 10XB* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below6.0 M9G# 25B* 4.9 19.6 PAN GS 060 IGE 006.0 # K1 5.2 19.6 PAN GS 060 RGE 006.0 # K1 2655.0 M9G# 30B* 4.1 19.6 PAN GS 060 IGE 005.0 # K1 4.3 19.6 PAN GS 060 RGE 005.0 # K1 2653.0 M9G# 50B* 2.5 19.6 PAN GS 060 IGE 003.0 # K1 2.6 19.6 PAN GS 060 RGE 003.0 # K1 2652.0 M9G# 75B* 1.6 19.6 PAN GS 060 IGE 002.0 # K1 1.7 19.6 PAN GS 060 RGE 002.0 # K1 265

5.11.5 M9G# 100B* 1.2 19.6 PAN GS 060 IGE 001.5 # K1 1.3 19.6 PAN GS 060 RGE 001.5 # K1 2651.3 M9G# 120B* 1.0 19.6 PAN GS 060 IGE 001.3 # K1 1.1 19.6 PAN GS 060 RGE 001.3 # K1 2651.0 M9G# 150B* 0.8 19.6 PAN GS 060 IGE 001.0 # K1 0.9 19.6 PAN GS 060 RGE 001.0 # K1 2650.8 M9G# 200B* 0.7 19.6 PAN GS 060 IGE 000.8 # K1 0.7 19.6 PAN GS 060 RGE 000.8 # K1 265

➤ Rated 230V ± 10% and 50 Hz


➤ Enclosure IP54



(Standard 4.0µF, QR 5.0µF)➤ Integrated thermal protection switch



Flanged M9GCgearbox

Square M9GDgearbox



15

230 V



Input power 118 W



230 V



Input power 127 W



Quick reversible

MAX30

92

75 1

38

17Ø15

h7

25 29

120

31

L

Ø34

(73.

5)

5

67

ON 104 P.C.D.4 x M6

18

90

MAX30

92

75 1

12 38

120

L

31

Ø34

Ø15

h7

17

25

29

Ø34

44

60

36

4 x M6 ON 104 PCD

(73.

5)

5

67

18

90

130

110

4 HOLES Ø8.5

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

Standard induction

60W1 phase

16

➤ Rated 230V ± 10% and 50 Hz


➤ Enclosure IP54


➤ Supplied with run capacitor (Standard

4.0µF, QR 5.0µF)➤ Integrated thermal protection switch


For speeds of 30 r/min and below high torque gearbox-es are available, giving torques up to 29.4 Nm. Standardinduction motors suit fixed speed applications.


HIGHER SPEEDS – see the 60W and 90W selections on adjacent pages


Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @230V Nm number L kg

30 M9G# 50B 25 16.5 PAN GS 060 IGE 030.0 # K1 26 15.4 PAN GS 060 RGE 030.0 # K1 25220 M9G# 75B* 16.3 22.9 PAN GS 060 IGE 020.0 # K1 17 21.5 PAN GS 060 RGE 020.0 # K1 25215 M9G# 100B* 12.3 29.4 PAN GS 060 IGE 015.0 # K1 13 29.4 PAN GS 060 RGE 015.0 # K1 252

4.912.5 M9G# 120B* 10.2 29.4 PAN GS 060 IGE 012.5 # K1 10.8 29.4 PAN GS 060 RGE 012.5 # K1 25210 M9G# 150B* 8.2 29.4 PAN GS 060 IGE 010.0 # K1 8.7 29.4 PAN GS 060 RGE 010.0 # K1 2527.5 M9G# 200B* 6.1 29.4 PAN GS 060 IGE 007.5 # K1 6.5 29.4 PAN GS 060 RGE 007.5 # K1 252

M9GC 10XB* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below3.0 M9G# 50B* 2.5 29.4 PAN GS 060 IGE 003.0 # K1 2.6 29.4 PAN GS 060 RGE 003.0 # K1 2922.0 M9G# 75B* 1.6 29.4 PAN GS 060 IGE 002.0 # K1 1.7 29.4 PAN GS 060 RGE 002.0 # K1 2921.5 M9G# 100B* 1.2 29.4 PAN GS 060 IGE 001.5 # K1 1.3 29.4 PAN GS 060 RGE 001.5 # K1 292

5.51.3 M9G# 120B* 1.0 29.4 PAN GS 060 IGE 001.3 # K1 1.1 29.4 PAN GS 060 RGE 001.3 # K1 2921.0 M9G# 150B* 0.8 29.4 PAN GS 060 IGE 001.0 # K1 0.9 29.4 PAN GS 060 RGE 001.0 # K1 2920.8 M9G# 200B* 0.7 29.4 PAN GS 060 IGE 000.8 # K1 0.7 29.4 PAN GS 060 RGE 000.8 # K1 292

Ordering specification and exampleReplace the letter # from the assembly number with a ‘S’ for flanged gearbox or ‘T’ for square gearbox as required. Examples:

30 r/min flanged with standard induction motor PAN GS 060 IGE 030.0 S K11.5 r/min square with quick reversible motor PAN GS 060 RGE 001.5 T K1


Panasonic G-series 60W HT 1 phase Standard & Quick Reversible

Flanged M9GSgearbox

Square M9GTgearbox



17

230 V



Input power 118 W



230 V



Input power 127 W



Quick reversible

30 MAX

92

75 1 12 45

30

20.5

L

38

Ø40

Ø18

h7

35

120

667

36

60

44

90

130 110

(73.

5)

18

CT

RS

4 HOLES Ø8.5

30 MAX

92

75 1 12

30

4535

38

20.5

Ø40

Ø18

h7

L120

67 6

Ø40

(73.

5)44

Ø18

h7

90

4 HOLES Ø8.5

18

CT

RS

ON 104 P.C.D.

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

Standard induction

60W1 phase

high torque

18

➤ Rated 230V ± 10% and 50 Hz

➤ Standard motor rated continuousduty S1, quick reversing duty S2

➤ Enclosure IP54



(Standard 4.5µF, QR 5.5µF)➤ Integrated thermal protection switch




HIGHER TORQUES – available from 20 r/min and slower speeds, see previous 60W high torque pages.


Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @230V Nm number L kg500 M9G# 3B 442 1.5 PAN GS 090 IGE 500.0 # K1 350 1.9 PAN GS 090 RGE 500.0 # K1 240300 M9G# 5B 265 2.6 PAN GS 090 IGE 300.0 # K1 210 3.1 PAN GS 090 RGE 300.0 # K1 240200 M9G# 7.5B 177 3.8 PAN GS 090 IGE 200.0 # K1 140 4.6 PAN GS 090 RGE 200.0 # K1 240150 M9G# 10B 133 4.7 PAN GS 090 IGE 150.0 # K1 105 5.7 PAN GS 090 RGE 150.0 # K1 240100 M9G# 15B 88 7.1 PAN GS 090 IGE 100.0 # K1 70 8.6 PAN GS 090 RGE 100.0 # K1 24075 M9G# 20B 66 8.8 PAN GS 090 IGE 075.0 # K1 53 10.6 PAN GS 090 RGE 075.0 # K1 24060 M9G# 25B 53 11 PAN GS 090 IGE 060.0 # K1 42 13.3 PAN GS 090 RGE 060.0 # K1 240

4.550 M9G# 30B 44 13.2 PAN GS 090 IGE 050.0 # K1 35 16.0 PAN GS 090 RGE 050.0 # K1 24030 M9G# 50B 26.5 19.6 PAN GS 090 IGE 030.0 # K1 21 19.6 PAN GS 090 RGE 030.0 # K1 24020 M9G# 75B* 17.7 19.6 PAN GS 090 IGE 020.0 # K1 14 19.6 PAN GS 090 RGE 020.0 # K1 24015 M9G# 100B* 13.3 19.6 PAN GS 090 IGE 015.0 # K1 10.5 19.6 PAN GS 090 RGE 015.0 # K1 240

12.5 M9G# 120B* 11 19.6 PAN GS 090 IGE 012.5 # K1 8.8 19.6 PAN GS 090 RGE 012.5 # K1 24010 M9G# 150B* 8.8 19.6 PAN GS 090 IGE 010.0 # K1 7 19.6 PAN GS 090 RGE 010.0 # K1 2407.5 M9G# 200B* 6.6 19.6 PAN GS 090 IGE 007.5 # K1 5.3 19.6 PAN GS 090 RGE 007.5 # K1 240

M9GC 10XB* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below6.0 M9G# 25B* 5.3 19.6 PAN GS 060 IGE 006.0 # K1 4.2 19.6 PAN GS 090 RGE 006.0 # K1 280

5.45.0 M9G# 30B* 4.4 19.6 PAN GS 060 IGE 005.0 # K1 3.5 19.6 PAN GS 090 RGE 005.0 # K1 280


100 r/min flanged with standard induction motor PAN GS 090 IGE 100.0 C K15 r/min square with quick reversible motor PAN GS 090 RGE 005.0 D K1



Flanged M9GCgearbox

Square M9GDgearbox



1.5

1.0

0.5

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

19

230 V



Input power 153 W



230 V



Input power 194 W




MAX30

92

135

75 1

29

38 12

31

Ø34

Ø15

h7

17

L

25

567

(73.

5)60

4 x M6 ON 104 PCD

44

18

4 HOLES Ø8.5

130 110 90

36

30 75 1

92

135

38

29 25

17

Ø34

Ø15

h7

L

31

MAX67

5

18

4 x M6ON 104 P.C.D.

90

(73.

5)

duty S2

1.5

1.0

0.5

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

90W1 phase

20

Panasonic G-series 25W 3 phase

These 3 phase induction motors deliver high startingtorques. 400V versions suit fixed speed applications.230V versions are ideal for use with inverters such asthe Panasonic Micro-Inverter.

➤ Rated 230V or 400V ± 10%


➤ Enclosure IP54




230V 3 phase Motor 400V 3 phase MotorModel Number : M8MA25GKP4W1 Model Number : M8MA25GK4CE1

Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @400V Nm number L kg500 M8GA 3B 458 0.41 PAN GS 025 MPW 500.0 A K1 450 0.41 PAN GS 025 MCE 500.0 A K1 149300 M8GA 5B 275 0.69 PAN GS 025 MPW 300.0 A K1 270 0.69 PAN GS 025 MCE 300.0 A K1 149200 M8GA 7.5B 183 1 PAN GS 025 MPW 200.0 A K1 180 1 PAN GS 025 MCE 200.0 A K1 149150 M8GA 10B 138 1.3 PAN GS 025 MPW 150.0 A K1 135 1.3 PAN GS 025 MCE 150.0 A K1 149100 M8GA 15B 92 1.9 PAN GS 025 MPW 100.0 A K1 90 1.9 PAN GS 025 MCE 100.0 A K1 14975 M8GA 20B 69 2.6 PAN GS 025 MPW 075.0 A K1 68 2.6 PAN GS 025 MCE 075.0 A K1 15960 M8GA 25B 55 3.2 PAN GS 025 MPW 060.0 A K1 54 3.2 PAN GS 025 MCE 060.0 A K1 159

2.850 M8GA 30B 46 3.8 PAN GS 025 MPW 050.0 A K1 45 3.8 PAN GS 025 MCE 050.0 A K1 15930 M8GA 50B 27.5 6.4 PAN GS 025 MPW 030.0 A K1 27 6.4 PAN GS 025 MCE 030.0 A K1 15920 M8GA 75B* 18.3 7.8 PAN GS 025 MPW 020.0 A K1 18 7.8 PAN GS 025 MCE 020.0 A K1 15915 M8GA 100B* 13.8 7.8 PAN GS 025 MPW 015.0 A K1 13.5 7.8 PAN GS 025 MCE 015.0 A K1 159

12.5 M8GA 120B* 11.5 7.8 PAN GS 025 MPW 012.5 A K1 11.3 7.8 PAN GS 025 MCE 012.5 A K1 15910 M8GA 150B* 9.2 7.8 PAN GS 025 MPW 010.0 A K1 9 7.8 PAN GS 025 MCE 010.0 A K1 1598.3 M8GA 180B* 7.6 7.8 PAN GS 025 MPW 008.3 A K1 7.5 7.8 PAN GS 025 MCE 008.3 A K1 159

M8GA 10XM* Additional gearbox M8GA 10XM must be used for speeds of 7.5 r/min and below7.5 M8GA 20B* 6.9 7.8 PAN GS 025 MPW 007.5 A K1 6.8 7.8 PAN GS 025 MCE 007.5 A K1 1866.0 M8GA 25B* 5.5 7.8 PAN GS 025 MPW 006.0 A K1 5.4 7.8 PAN GS 025 MCE 006.0 A K1 1865.0 M8GA 30B* 4.6 7.8 PAN GS 025 MPW 005.0 A K1 4.5 7.8 PAN GS 025 MCE 005.0 A K1 1863.0 M8GA 50B* 2.8 7.8 PAN GS 025 MPW 003.0 A K1 2.7 7.8 PAN GS 025 MCE 003.0 A K1 1862.0 M8GA 75B* 1.8 7.8 PAN GS 025 MPW 002.0 A K1 1.8 7.8 PAN GS 025 MCE 002.0 A K1 186 2.91.5 M8GA 100B* 1.4 7.8 PAN GS 025 MPW 001.5 A K1 1.4 7.8 PAN GS 025 MCE 001.5 A K1 1861.3 M8GA 120B* 1.1 7.8 PAN GS 025 MPW 001.3 A K1 1.1 7.8 PAN GS 025 MCE 001.3 A K1 1861.0 M8GA 150B* 0.9 7.8 PAN GS 025 MPW 001.0 A K1 0.9 7.8 PAN GS 025 MCE 001.0 A K1 1860.8 M8GA 180B* 0.8 7.8 PAN GS 025 MPW 000.8 A K1 0.8 7.8 PAN GS 025 MCE 000.8 A K1 186

M8GA gearbox



21

26 11.5

80

(66.5)

CT

RS

15

4xM5 ON 94 PCD

4

ø30

44

10ø

h7

25

67 32 1

L

85

ø82

75 30 MAX

25W3 phase

230 V 400 V

Rated current 0.26 A 0.12 A

Starting current 0.68 A 0.31 A

Input power 53 W 51 W

Rated speed 1375r/min 1350r/min


1.5

1.25

1.0

0.75

0.5

0.25

0 0 250 500 750 1000 1250 1500 1750 2000

Speed (r/min.)

NmVariable speed operationPanasonic G-series geared motors suit operationwith either the Panasonic Mirco-inverter or the Lenzesmd inverter. Both require only 1 phase mains inputto control 230V 3 phase motors.

Micro-Inverter

➤ Very compact

➤ Simple operation

➤ 30:1 speed range

➤ Good torque performance

see page 40

Lenze smd inverter

➤ 1.5x overload for 60s

➤ Integral RFI filter

➤ EPM memory chip

➤ 250W version suits all G-series

See our website www.lenze.co.uk

22



➤ Rated 230V or 400V ± 10%


➤ Enclosure IP54




230V 3 phase Motor 400V 3 phase MotorModel Number : M8MA40GKP4W1 Model Number : M8MA40GK4CE1

Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @400V Nm number L kg500 M9GA 3B 458 0.66 PAN GS 040 MPW 500.0 A K1 458 0.63 PAN GS 040 MCE 500.0 A K1 179300 M9GA 5B 275 1.1 PAN GS 040 MPW 300.0 A K1 275 1.1 PAN GS 040 MCE 300.0 A K1 179200 M9GA 7.5B 183 1.6 PAN GS 040 MPW 200.0 A K1 183 1.6 PAN GS 040 MCE 200.0 A K1 179150 M9GA 10B 138 2 PAN GS 040 MPW 150.0 A K1 138 1.9 PAN GS 040 MCE 150.0 A K1 179100 M9GA 15B 92 3 PAN GS 040 MPW 100.0 A K1 92 2.9 PAN GS 040 MCE 100.0 A K1 17975 M9GA 20B 69 4 PAN GS 040 MPW 075.0 A K1 69 3.9 PAN GS 040 MCE 075.0 A K1 19760 M9GA 25B 55 5.1 PAN GS 040 MPW 060.0 A K1 55 4.9 PAN GS 040 MCE 060.0 A K1 197

4.050 M9GA 30B 46 6.1 PAN GS 040 MPW 050.0 A K1 46 5.9 PAN GS 040 MCE 050.0 A K1 19730 M9GA 50B 27.5 9.8 PAN GS 040 MPW 030.0 A K1 27.5 9.8 PAN GS 040 MCE 030.0 A K1 19720 M9GA 75B* 18.3 9.8 PAN GS 040 MPW 020.0 A K1 18.3 9.8 PAN GS 040 MCE 020.0 A K1 19715 M9GA 100B* 13.8 9.8 PAN GS 040 MPW 015.0 A K1 13.8 9.8 PAN GS 040 MCE 015.0 A K1 197

12.5 M9GA 120B* 11.5 9.8 PAN GS 040 MPW 012.5 A K1 11.5 9.8 PAN GS 040 MCE 012.5 A K1 19710 M9GA 150B* 9.2 9.8 PAN GS 040 MPW 010.0 A K1 9.2 9.8 PAN GS 040 MCE 010.0 A K1 1978.3 M9GA 180B* 7.6 9.8 PAN GS 040 MPW 008.3 A K1 7.6 9.8 PAN GS 040 MCE 008.3 A K1 197

M9GA 10XM* Additional gearbox M9GA 10XM must be used for speeds of 7.5 r/min and below7.5 M9GA 20B* 6.9 9.8 PAN GS 040 MPW 007.5 A K1 6.9 9.8 PAN GS 040 MCE 007.5 A K1 2296.0 M9GA 25B* 5.5 9.8 PAN GS 040 MPW 006.0 A K1 5.5 9.8 PAN GS 040 MCE 006.0 A K1 2295.0 M9GA 30B* 4.6 9.8 PAN GS 040 MPW 005.0 A K1 4.6 9.8 PAN GS 040 MCE 005.0 A K1 2293.0 M9GA 50B* 2.8 9.8 PAN GS 040 MPW 003.0 A K1 2.8 9.8 PAN GS 040 MCE 003.0 A K1 2292.0 M9GA 75B* 1.8 9.8 PAN GS 040 MPW 002.0 A K1 1.8 9.8 PAN GS 040 MCE 002.0 A K1 229 4.71.5 M9GA 100B* 1.4 9.8 PAN GS 040 MPW 001.5 A K1 1.4 9.8 PAN GS 040 MCE 001.5 A K1 2291.3 M9GA 120B* 1.1 9.8 PAN GS 040 MPW 001.3 A K1 1.1 9.8 PAN GS 040 MCE 001.3 A K1 2291.0 M9GA 150B* 0.9 9.8 PAN GS 040 MPW 001.0 A K1 0.9 9.8 PAN GS 040 MCE 001.0 A K1 2290.8 M9GA 180B* 0.8 9.8 PAN GS 040 MPW 000.8 A K1 0.8 9.8 PAN GS 040 MCE 000.8 A K1 229

M9GA gearbox



23

13.5 27

90

(73.5)

18

CT

RS

4xM6 ON 104 PCD

4 44

ø12

h7

ø36

25

67 32

L

105

ø92

1 75 30 MAX

40W3 phase

230 V 400 V






1.5

1.25

1.0

0.75

0.5

0.25

00 250 500 750 1000 1250 1500 1750 2000

Speed (r/min.)


Micro-Inverter

➤ Very compact




see page 40

Lenze smd inverter



➤ EPM memory chip



24


All 60W geared motors are available with flanged orsquare gearboxes.


➤ Rated 230V or 400V ± 10%


➤ Enclosure IP54





100 r/min flanged with 230V 3 phase motor PAN GS 060 MPW 100.0 C K15 r/min square with 400V 3 phase motor PAN GS 060 MCE 005.0 D K1


230V 3 phase Motor 400V 3 phase MotorModel Number : M9MC60GKP4W1 Model Number : M9MC60GK4CE1

Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @400V Nm number L kg500 M9G# 3B 458 1 PAN GS 060 MPW 500.0 # K1 458 1 PAN GS 060 MCE 500.0 # K1 225300 M9G# 5B 275 1.7 PAN GS 060 MPW 300.0 # K1 275 1.71 PAN GS 060 MCE 300.0 # K1 225200 M9G# 7.5B 183 2.5 PAN GS 060 MPW 200.0 # K1 183 2.5 PAN GS 060 MCE 200.0 # K1 225150 M9G# 10B 138 3.1 PAN GS 060 MPW 150.0 # K1 138 3.1 PAN GS 060 MCE 150.0 # K1 225100 M9G# 15B 92 4.6 PAN GS 060 MPW 100.0 # K1 92 4.6 PAN GS 060 MCE 100.0 # K1 22575 M9G# 20B 69 5.7 PAN GS 060 MPW 075.0 # K1 69 5.7 PAN GS 060 MCE 075.0 # K1 22560 M9G# 25B 55 7.2 PAN GS 060 MPW 060.0 # K1 55 7.2 PAN GS 060 MCE 060.0 # K1 225

4.550 M9G# 30B 46 8.6 PAN GS 060 MPW 050.0 # K1 46 8.6 PAN GS 060 MCE 050.0 # K1 22530 M9G# 50B 27.5 14.4 PAN GS 060 MPW 030.0 # K1 27.5 14.4 PAN GS 060 MCE 030.0 # K1 22520 M9G# 75B* 18.3 19.6 PAN GS 060 MPW 020.0 # K1 18.3 19.6 PAN GS 060 MCE 020.0 # K1 22515 M9G# 100B* 13.8 19.6 PAN GS 060 MPW 015.0 # K1 13.8 19.6 PAN GS 060 MCE 015.0 # K1 225

12.5 M9G# 120B* 11.5 19.6 PAN GS 060 MPW 012.5 # K1 11.5 19.6 PAN GS 060 MCE 012.5 # K1 22510 M9G# 150B* 9.2 19.6 PAN GS 060 MPW 010.0 # K1 9.2 19.6 PAN GS 060 MCE 010.0 # K1 2257.5 M9G# 200B* 7.6 19.6 PAN GS 060 MPW 008.3 # K1 7.6 19.6 PAN GS 060 MCE 008.3 # K1 225

M9GC 10XM* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below7.5 M9G# 20B* 6.9 19.6 PAN GS 060 MPW 007.5 # K1 6.9 19.6 PAN GS 060 MCE 007.5 # K1 2656.0 M9G# 25B* 5.5 19.6 PAN GS 060 MPW 006.0 # K1 5.5 19.6 PAN GS 060 MCE 006.0 # K1 2655.0 M9G# 30B* 4.6 19.6 PAN GS 060 MPW 005.0 # K1 4.6 19.6 PAN GS 060 MCE 005.0 # K1 2653.0 M9G# 50B* 2.8 19.6 PAN GS 060 MPW 003.0 # K1 2.8 19.6 PAN GS 060 MCE 003.0 # K1 2652.0 M9G# 75B* 1.8 19.6 PAN GS 060 MPW 002.0 # K1 1.8 19.6 PAN GS 060 MCE 002.0 # K1 265 5.11.5 M9G# 100B* 1.4 19.6 PAN GS 060 MPW 001.5 # K1 1.4 19.6 PAN GS 060 MCE 001.5 # K1 2651.3 M9G# 120B* 1.1 19.6 PAN GS 060 MPW 001.3 # K1 1.1 19.6 PAN GS 060 MCE 001.3 # K1 2651.0 M9G# 150B* 0.9 19.6 PAN GS 060 MPW 001.0 # K1 0.9 19.6 PAN GS 060 MCE 001.0 # K1 2650.8 M9G# 200B* 0.8 19.6 PAN GS 060 MPW 000.8 # K1 0.8 19.6 PAN GS 060 MCE 000.8 # K1 265

HIGHER TORQUES – available from 30 r/min and slower speeds, see following 60W high torque pages.

Flanged M9GCgearbox

Square M9GDgearbox



25

MAX30

92

75 1

12 38

120 L

31

Ø34

Ø15

h7

17

D

25 29

Ø34

44

60

36

4 x M6 ON 104 PCD

(73.

5)

567

18

90

130110

4 HOLES Ø8.5

MAX30

92

75 1

38

17Ø15

h7 25

29

120

31

L

Ø34

(73.

5) Ø34

5 67

ON 104 P.C.D.4 x M6

18

90

60W3 phase

230 V 400 V






1.5

1.25

1.0

0.75

0.5

0.25

0 0 250 500 750 1000 1250 1500 1750 2000Speed (r/min.)


Micro-Inverter

➤ Very compact




see page 40

Lenze smd inverter



➤ EPM memory chip



26

For speeds of 30 r/min and below a high torque gearboxis available to give torque up to 29.4 Nm.



Panasonic G-series 60 HT 3 phase

➤ Rated 230V or 400V ± 10%


➤ Enclosure IP54





30 r/min flanged with 230V 3 phase motor PAN GS 060 MPW 030.0 S K11.5 r/min square with 400V 3 phase motor PAN GS 060 MCE 001.5 T K1


HIGHER SPEEDS – see the 60W and 90W selections on adjacent pages

Flanged M9GSgearbox

Square M9GTgearbox


Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @400V Nm number L kg

30 M9G# 50B 27.5 14.4 PAN GS 060 MPW 030.0 # K1 27.5 14.4 PAN GS 060 MCE 030.0 # K1 22520 M9G# 75B* 18.3 20 PAN GS 060 MPW 020.0 # K1 18.3 20 PAN GS 060 MCE 020.0 # K1 22515 M9G# 100B* 13.8 26.7 PAN GS 060 MPW 015.0 # K1 13.8 26.7 PAN GS 060 MCE 015.0 # K1 225 4.9


M9GC 10XM* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below3.0 M9G# 50B* 2.8 29.6 PAN GS 060 MPW 003.0 # K1 2.8 29.6 PAN GS 060 MCE 003.0 # K1 2652.0 M9G# 75B* 1.8 29.6 PAN GS 060 MPW 002.0 # K1 1.8 29.6 PAN GS 060 MCE 002.0 # K1 265 5.51.5 M9G# 100B* 1.4 29.6 PAN GS 060 MPW 001.5 # K1 1.4 29.6 PAN GS 060 MCE 001.5 # K1 2651.3 M9G# 120B* 1.1 29.6 PAN GS 060 MPW 001.3 # K1 1.1 29.6 PAN GS 060 MCE 001.3 # K1 2651.0 M9G# 150B* 0.9 29.6 PAN GS 060 MPW 001.0 # K1 0.9 29.6 PAN GS 060 MCE 001.0 # K1 2650.8 M9G# 180B* 0.8 29.6 PAN GS 060 MPW 000.8 # K1 0.8 29.6 PAN GS 060 MCE 000.8 # K1 265



27

30 MAX

92

75 1 12 45

30

20.5

L

38

Ø40

Ø18

h7

35

120

667

36

60

44

90

130 110

(73.

5)

18

CT

RS

4 HOLES Ø8.5

30 MAX

92

75 1 12

30

4535

38

20.5

Ø40

Ø18

h7

L120

67 6

(73.

5)44

90

4 HOLES Ø8.5

18

CT

RS

ON 104 P.C.D.

60W3 phase

high torque

230 V 400 V






1.5

1.25

1.0

0.75

0.5

0.25

0 0 250 500 750 1000 1250 1500 1750 2000Speed (r/min.)


Micro-Inverter

➤ Very compact




see page 40

Lenze smd inverter



➤ EPM memory chip



28


Flanged M9GCgearbox

Square M9GDgearbox



➤ Rated 230V ± 10%







Nominal Gearbox Actual Rated Actual Ratedspeed model speed torque Assembly speed torque Assembly Length Weightr/min number @230V Nm number @400V Nm number L kg500 M9G# 3B 458 1.5 PAN GS 060 MPW 500.0 # K1 458 1.4 PAN GS 060 MCE 500.0 # K1 240300 M9G# 5B 275 2.5 PAN GS 060 MPW 300.0 # K1 275 2.4 PAN GS 060 MCE 300.0 # K1 240200 M9G# 7.5B 183 3.8 PAN GS 060 MPW 200.0 # K1 183 3.5 PAN GS 060 MCE 200.0 # K1 240150 M9G# 10B 138 4.7 PAN GS 060 MPW 150.0 # K1 138 4.4 PAN GS 060 MCE 150.0 # K1 240100 M9G# 15B 92 7 PAN GS 060 MPW 100.0 # K1 92 6.5 PAN GS 060 MCE 100.0 # K1 24075 M9G# 20B 69 8.7 PAN GS 060 MPW 075.0 # K1 69 8.1 PAN GS 060 MCE 075.0 # K1 24060 M9G# 25B 55 10.8 PAN GS 060 MPW 060.0 # K1 55 10.2 PAN GS 060 MCE 060.0 # K1 240

4.850 M9G# 30B 46 13.0 PAN GS 060 MPW 050.0 # K1 46 12.2 PAN GS 060 MCE 050.0 # K1 24030 M9G# 50B 27.5 19.6 PAN GS 060 MPW 030.0 # K1 27.5 19.6 PAN GS 060 MCE 030.0 # K1 24020 M9G# 75B* 18.3 19.6 PAN GS 060 MPW 020.0 # K1 18.3 19.6 PAN GS 060 MCE 020.0 # K1 24015 M9G# 100B* 13.8 19.6 PAN GS 060 MPW 015.0 # K1 13.8 19.6 PAN GS 060 MCE 015.0 # K1 240


M9GC 10XM* Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below6.0 M9G# 25B* 5.5 19.6 PAN GS 060 MPW 006.0 # K1 5.5 19.6 PAN GS 060 MCE 006.0 # K1 280

5.45.0 M9G# 30B* 4.6 19.6 PAN GS 060 MPW 005.0 # K1 4.6 19.6 PAN GS 060 MCE 005.0 # K1 280


100 r/min flanged with 230V 3 phase motor PAN GS 100.0 MPW 100.0 C K15 r/min square with 400V 3 phase motor PAN GS 100.0 MCE 005.0 D K1


HIGHER TORQUES – available from 20 r/min and slower, see previous 60W high torque pages.



29

MAX30

92

135

75 1

29

38 12

31

Ø34

Ø15

h7

17

L

25

567

(73.

5)60

4 x M6 ON 104 PCD

44

18

4 HOLES Ø8.5

130 110 90

36

30 75 1

92

135

38

29 25

17

Ø34

Ø15

h7

L

31

MAX67

5

18

4 x M6ON 104 P.C.D.

90

(73.

5)

90W3 phase

230 V 400 V






1.5

1.25

1.0

0.75

0.5

0.25

0 0 250 500 750 1000 1250 1500 1750 2000Speed (r/min.)


Micro-Inverter

➤ Very compact




see page 40

Lenze smd inverter



➤ EPM memory chip



30

Panasonic G-series geared brake motors

➤ Rated 230V ± 10% and 50 Hz


➤ Enclosure IP22 (cable downloads)



➤ Thermal protection by impedance

current limiting➤ approved, UL on request

MOTOR CABLE 300mm

4xM4 ON 70 PCD

(49.5)

60

CT

RS

10 7

ø25

ø8

h7

12

26

32

L

7

115

42 3

ø62

BRAKE CABLE 300mm

Brake motors feature a spring applied electromagneticbrake suitable for fast stop and holding torques.

The brake is operated from mains supply connections.Up to six stops/starts per minute are possible.

1 phase Brake MotorModel Number : M6RA6GB4GE

Nominal Gearbox Actual Rated Brakingspeed model speed torque torque Assembly Length Weightr/min number @230V Nm Nm number L kg500 M6GA 3B 408 0.11 0.12 PAN GS 006 BGE 500.0 A L1 173300 M6GA 5B 245 0.18 0.2 PAN GS 006 BGE 300.0 A L1 173200 M6GA 7.5B 163 0.27 0.3 PAN GS 006 BGE 200.0 A L1 173150 M6GA 10B 123 0.33 0.37 PAN GS 006 BGE 150.0 A L1 173100 M6GA 15B 82 0.5 0.55 PAN GS 006 BGE 100.0 A L1 17375 M6GA 20B 61 0.66 0.75 PAN GS 006 BGE 075.0 A L1 18260 M6GA 25B 49 0.83 0.92 PAN GS 006 BGE 060.0 A L1 182

1.0150 M6GA 30B 41 1.0 1.1 PAN GS 006 BGE 050.0 A L1 18230 M6GA 50B 25 1.7 1.84 PAN GS 006 BGE 030.0 A L1 18220 M6GA 75B* 16.3 2.3 2.5 PAN GS 006 BGE 020.0 A L1 18215 M6GA 100B* 12.3 2.5 2.5 PAN GS 006 BGE 015.0 A L1 182

12.5 M6GA 120B* 10.2 2.5 2.5 PAN GS 006 BGE 012.5 A L1 18210 M6GA 150B* 8.2 2.5 2.5 PAN GS 006 BGE 010.0 A L1 1828.3 M6GA 180B* 6.8 2.5 2.5 PAN GS 006 BGE 008.3 A L1 182

M6GA gearbox

Motor details

Rated current 0.10AStarting current 1.12AInput power 22WRated speed 1225r/min



6W1 phasebraked

31


➤ Rated 230V ± 10% and 50 Hz


➤ Enclosure IP22 (cable downloads)







MOTOR CABLE 300mm

(58)

70

11.5 25

CT

RS

15 ø

10 h

7

4xM5 ON 82 PCD

4

ø30

27 32

7

L

120

42 3

ø72

BRAKE CABLE 300mm

1 phase Brake MotorModel Number : M7RA15GB4GE

Nominal Gearbox Actual Rated Brakingspeed model speed torque torque Assembly Length Weightr/min number @230V Nm Nm number L kg500 M7GA 3B 408 0.27 0.19 PAN GS 015 BGE 500.0 A L1 184300 M7GA 5B 245 0.45 0.32 PAN GS 015 BGE 300.0 A L1 184200 M7GA 7.5B 163 0.67 0.47 PAN GS 015 BGE 200.0 A L1 184150 M7GA 10B 123 0.83 0.59 PAN GS 015 BGE 150.0 A L1 184100 M7GA 15B 82 1.24 0.88 PAN GS 015 BGE 100.0 A L1 18475 M7GA 20B 61 1.65 1.17 PAN GS 015 BGE 075.0 A L1 19460 M7GA 25B 49 2.1 1.46 PAN GS 015 BGE 060.0 A L1 194

1.6450 M7GA 30B 41 2.5 1.8 PAN GS 015 BGE 050.0 A L1 19430 M7GA 50B 25 4.1 2.9 PAN GS 015 BGE 030.0 A L1 19420 M7GA 75B* 16.3 4.9 4.1 PAN GS 015 BGE 020.0 A L1 19415 M7GA 100B* 12.3 4.9 4.9 PAN GS 015 BGE 015.0 A L1 194

12.5 M7GA 120B* 10.2 4.9 4.9 PAN GS 015 BGE 012.5 A L1 19410 M7GA 150B* 8.2 4.9 4.9 PAN GS 015 BGE 010.0 A L1 1948.3 M7GA 180B* 6.8 4.9 4.9 PAN GS 015 BGE 008.3 A L1 194

M7GA gearbox

Motor details

Rated current 0.17AStarting current 1.24AInput power 38WRated speed 1225r/min



15W1 phasebraked

80

(66.5) 4xM5 ON 94 PCD 25

CT

RS

15

11.567

44

4

ø30

10ø

h7

26 32 1

48

L

7.5130

2

ø82

MAX75 30 BRAKE CABLE 300mm

32


➤ Rated 230V ± 10% and 50 Hz


➤ Enclosure IP44


➤ Supplied phase model supplied with

1.8µF run capcitor➤ Integrated thermal protection switch




1 phase Brake Motor 3 phase Brake MotorModel Number : M8RA25GBK4GE Model Number : M8MA25GBK4W1

Nominal Gearbox Actual Rated Braking Actual Rated Brakingspeed model speed torque torque Assembly speed torque torque Assembly Lengthr/min number @230V Nm Nm number @230V Nm Nm number L500 M8GA 3B 417 0.46 0.24 PAN GS 025 BGE 500.0 A K1 458 0.41 0.24 PAN GS 025 BPW 500.0 A K1 194300 M8GA 5B 150 0.77 0.4 PAN GS 025 BGE 300.0 A K1 275 0.69 0.4 PAN GS 025 BPW 300.0 A K1 194200 M8GA 7.5B 167 1.15 0.6 PAN GS 025 BGE 200.0 A K1 183 1 0.6 PAN GS 025 BPW 200.0 A K1 194150 M8GA 10B 125 1.4 0.74 PAN GS 025 BGE 150.0 A K1 138 1.3 0.74 PAN GS 025 BPW 150.0 A K1 194100 M8GA 15B 83 2.1 1.1 PAN GS 025 BGE 100.0 A K1 92 1.9 1.1 PAN GS 025 BPW 100.0 A K1 19475 M8GA 20B 63 2.9 1.5 PAN GS 025 BGE 075.0 A K1 69 2.6 1.5 PAN GS 025 BPW 075.0 A K1 20460 M8GA 25B 50 3.6 1.8 PAN GS 025 BGE 060.0 A K1 55 3.2 1.8 PAN GS 025 BPW 060.0 A K1 20450 M8GA 30B 42 4.3 2.2 PAN GS 025 BGE 050.0 A K1 46 3.8 2.2 PAN GS 025 BPW 050.0 A K1 20430 M8GA 50B 255 7.1 3.7 PAN GS 025 BGE 030.0 A K1 27.5 6.4 3.7 PAN GS 025 BPW 030.0 A K1 20420 M8GA 75B* 16.7 7.8 5.2 PAN GS 025 BGE 020.0 A K1 18.3 7.8 5.2 PAN GS 025 BPW 020.0 A K1 20415 M8GA 100B* 12.5 7.8 6.9 PAN GS 025 BGE 015.0 A K1 13.8 7.8 6.9 PAN GS 025 BPW 015.0 A K1 204

12.5 M8GA 120B* 10.4 7.8 7.8 PAN GS 025 BGE 012.5 A K1 11.5 7.8 7.8 PAN GS 025 BPW 012.5 A K1 20410 M8GA 150B* 8.3 7.8 7.8 PAN GS 025 BGE 010.0 A K1 9.2 7.8 7.8 PAN GS 025 BPW 010.0 A K1 2048.3 M8GA 180B* 6.9 7.8 7.8 PAN GS 025 BGE 008.3 A K1 7.6 7.8 7.8 PAN GS 025 BPW 008.3 A K1 204

M8GA gearbox

Geared motor weight = 2.8kg



Motor details: 1 phase rated current 0.25A, starting current 0.43A, rated speed 1250r/min

25Wbraked

33


1

(73.5)

90

CT

RS

18

4xM6 ON 104 PCD 25

ø36

4 44

ø12

h7

13.567

27 32

L

7.5152

50

ø92

BRAKE CABLE 300mmMAX30 75



➤ Rated 230V ± 10% and 50 Hz

➤ 1 phase models intermittent duty S2

3 phase models, continuous duty S1➤ Enclosure IP44



3.0µF run capcitor➤ Integrates thermal protection switch


1 phase Brake Motor 3 phase Brake MotorModel Number : M9RA40GBK4GE Model Number : M9MA40GBK4W1

Nominal Gearbox Actual Rated Braking Actual Rated Brakingspeed model speed torque torque Assembly speed torque torque Assembly Lengthr/min number @230V Nm Nm number @230V Nm Nm number L500 M9GA 3B 392 0.8 0.48 PAN GS 040 BGE 500.0 A L1 458 0.66 0.48 PAN GS 040 BPW 500.0 A L1 227300 M9GA 5B 235 1.34 0.79 PAN GS 040 BGE 300.0 A L1 275 1.1 0.79 PAN GS 040 BPW 300.0 A L1 227200 M9GA 7.5B 157 2 1.19 PAN GS 040 BGE 200.0 A L1 183 1.6 1.19 PAN GS 040 BPW 200.0 A L1 227150 M9GA 10B 118 2.48 1.47 PAN GS 040 BGE 150.0 A L1 138 2 1.47 PAN GS 040 BPW 150.0 A L1 227100 M9GA 15B 78 3.7 2.2 PAN GS 040 BGE 100.0 A L1 92 3 2.2 PAN GS 040 BPW 100.0 A L1 22775 M9GA 20B 59 5 2.9 PAN GS 040 BGE 075.0 A L1 69 4 2.9 PAN GS 040 BPW 075.0 A L1 24560 M9GA 25B 47 5.8 3.7 PAN GS 040 BGE 060.0 A L1 55 5.1 3.7 PAN GS 040 BPW 060.0 A L1 24550 M9GA 30B 39 7.0 4.4 PAN GS 040 BGE 050.0 A L1 46 6.1 4.4 PAN GS 040 BPW 050.0 A L1 24530 M9GA 50B* 23.5 9.8 7.3 PAN GS 040 BGE 030.0 A L1 27.5 9.8 7.3 PAN GS 040 BPW 030.0 A L1 24520 M9GA 75B* 15.7 9.8 9.8 PAN GS 040 BGE 020.0 A L1 18.3 9.8 9.8 PAN GS 040 BPW 020.0 A L1 24515 M9GA 100B* 11.8 9.8 9.8 PAN GS 040 BGE 015.0 A L1 13.8 9.8 9.8 PAN GS 040 BPW 015.0 A L1 245

12.5 M9GA 120B* 9.8 9.8 9.8 PAN GS 040 BGE 012.5 A L1 11.5 9.8 9.8 PAN GS 040 BPW 012.5 A L1 24510 M9GA 150B* 7.8 9.8 9.8 PAN GS 040 BGE 010.0 A L1 9.2 9.8 9.8 PAN GS 040 BPW 010.0 A L1 2458.3 M9GA 180B* 6.5 9.8 9.8 PAN GS 040 BGE 008.3 A L1 7.6 9.8 9.8 PAN GS 040 BPW 008.3 A L1 245

M9GA gearbox




Motor details: 1 phase rated current 0.25A, starting current 0.43A, rated speed 1250r/min

40Wbraked

34

Brake motors feature a spring applied electromagneticbrake suitable for emergency stop and holding torques.

The brake is operated from mains supply connections. Up to six stops/starts per minute are possible. Flangedand square gearboxes are available.

230V 1 phase versions are available for fixed applica-tions. 230V 3 phase versions are available for variablespeed applications when used with the Panasonicmicro-Inverter or Lenze smd inverter.

Flanged M9GCgearbox

Square M9GDgearbox

Panasonic G-series 60W Braked Motor

1 phase Brake Motor 3 phase Brake MotorModel Number : M9RC60GBK4GE Model Number : M9MC60GBK4W1

Nominal Gearbox Actual Rated Braking Actual Rated Brakingspeed model speed torque torque Assembly speed torque torque Assembly Lengthr/min number @230V Nm Nm number @230V Nm Nm number L500 M9G# 3B 433 1.1 0.95 PAN GS 060 BGE 500.0 # K1 458 1 0.95 PAN GS 060 BPW 500.0 # K1 274300 M9G# 5B 260 1.9 1.59 PAN GS 060 BGE 300.0 # K1 275 1.7 1.59 PAN GS 060 BPW 300.0 # K1 274200 M9G# 7.5B 173 2.9 2.4 PAN GS 060 BGE 200.0 # K1 183 2.5 2.4 PAN GS 060 BPW 200.0 # K1 274150 M9G# 10B 130 3.5 2.9 PAN GS 060 BGE 150.0 # K1 138 3.1 2.9 PAN GS 060 BPW 150.0 # K1 274100 M9G# 15B 87 5.3 4.4 PAN GS 060 BGE 100.0 # K1 92 4.6 4.4 PAN GS 060 BPW 100.0 # K1 27475 M9G# 20B 65 6.6 5.5 PAN GS 060 BGE 075.0 # K1 69 5.7 5.5 PAN GS 060 BPW 075.0 # K1 27460 M9G# 25B 52 8.2 6.9 PAN GS 060 BGE 060.0 # K1 55 7.2 6.9 PAN GS 060 BPW 060.0 # K1 27450 M9G# 30B 43 9.9 8.2 PAN GS 060 BGE 050.0 # K1 46 8.6 8.2 PAN GS 060 BPW 050.0 # K1 27430 M9G# 50B 26 16.5 13.7 PAN GS 060 BGE 030.0 # K1 27.5 14.4 13.7 PAN GS 060 BPW 030.0 # K1 27420 M9G# 75B* 17.3 19.6 19.1 PAN GS 060 BGE 020.0 # K1 18.3 19.6 19.1 PAN GS 060 BPW 020.0 # K1 27415 M9G# 100B* 13 19.6 19.6 PAN GS 060 BGE 015.0 # K1 13.8 19.6 19.6 PAN GS 060 BPW 015.0 # K1 274

12.5 M9G# 120B* 10.8 19.6 19.6 PAN GS 060 BGE 012.5 # K1 11.5 19.6 19.6 PAN GS 060 BPW 012.5 # K1 27410 M9G# 150B* 8.7 19.6 19.6 PAN GS 060 BGE 010.0 # K1 9.2 19.6 19.6 PAN GS 060 BPW 010.0 # K1 2747.5 M9G# 200B* 6.5 19.6 19.6 PAN GS 060 BGE 007.5 # K1 6.9 19.6 19.6 PAN GS 060 BPW 007.5 # K1 274

➤ Rated 230V ± 10% and 50 Hz


➤ Enclosure IP44






100 r/min flanged with 1 phase brake motor PAN GS 060 BGE 100.0 C K110 r/min square with 3 phase brake motor PAN GS 060 BPW 010.0 D K1


HIGHER TORQUES – available from 30 r/min and slower, see following 60W high torque pages.




35D

17

ø15

h7

ø34

25 274

169

29

92

38 31

12 1 75 MAX30 BRAKE CABLE 300mm

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

230 V



Input power 127 W



MAX30 BRAKE CABLE 300mm

169

92

75 1

67 38

29

25

274

17

7

Ø34

90

67

5

136

Ø15 h7

18

4 X M6ON 104 P.C.D.

230 V



Input power 103 W



1.5

1.25

1.0

0.75

0.5

0.25

0 0 250 500 750 1000 1250 1500 1750 2000Speed (r/min.)

Nm

1 phase motors 3 phase motors

4xø8.5

130 110 90

CT

RS

18

4xM6 ON 104 PCD

(73.

5)

36

60

44

ø34

67 5

60Wbraked

36



230V 1 phase versions are available for fixed applica-tions. 230V 3 phase versions are available for variablespeed applications when used with the Panasonicmicro-Inverter or Lenze smd inverter.

Flanged M9GSgearbox

Square M9GTgearbox

Panasonic G-series 60W HT Braked Motor

➤ Rated 230V ± 10% and 50 Hz

➤ Intermittent duty S1

➤ Enclosure IP44


➤ Supplied with 5.0µF run capcitor

➤ Single phase models supplied with



1 phase Brake Motor 3 phase Brake MotorModel Number : M9RC60BGK4GE Model Number : M9MC60GBK4W1

Nominal Gearbox Actual Rated Braking Actual Rated Brakingspeed model speed torque torque Assembly speed torque torque Assembly Lengthr/min number @230V Nm Nm number @230V Nm Nm number L

30 M9G# 50B 26 15.4 13.7 PAN GS 060 BGE 030.0 # K1 27.5 14.4 13.7 PAN GS 060 BPW 030.0 # K1 30120 M9G# 75B* 17.3 21.5 19.1 PAN GS 060 BGE 020.0 # K1 18.3 19.1 19.1 PAN GS 060 BPW 020.0 # K1 30115 M9G# 100B* 13 28.6 25.5 PAN GS 060 BGE 015.0 # K1 13.8 25.5 25.5 PAN GS 060 BPW 015.0 # K1 301

12.5 M9G# 120B* 10.8 29.4 29.4 PAN GS 060 BGE 012.5 # K1 11.5 29.4 29.4 PAN GS 060 BPW 012.5 # K1 30110 M9G# 150B* 8.7 29.4 29.4 PAN GS 060 BGE 010.0 # K1 9.2 29.4 29.4 PAN GS 060 BPW 010.0 # K1 3017.5 M9G# 200B* 6.5 29.4 29.4 PAN GS 060 BGE 007.5 # K1 6.9 29.4 29.4 PAN GS 060 BPW 007.5 # K1 301


30 r/min 1 phase flanged brake motor PAN GS 060 BGE 030.0 S K17.5 r/min 3 phase square brake motor motor PAN GS 060 BPW 007.5 T K1


HIGHER SPEEDS – see the 60W and 90W selections on adjacent pages Geared motor weight = 4.9kg



37

30 ø

18 h

7

20.5

ø40

35

38

45

301

169

BRAKE CABLE 300mm

92

12 1 75

MAX

30

MAX30 BRAKE CABLE 300mm

92

169

751

7

301

12

30

20.5

35

45 88

136

67

Ø40ØØ

90

18

Ø8.5ON 104 P.C.D.4 HOLES

6

Ø18 h7

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

230 V



Input power 103 W



1.5

1.25

1.0

0.75

0.5

0.25

0 0 250 500 750 1000 1250 1500 1750 2000Speed (r/min.)

Nm

3 phase motors

230 V



Input power 127 W



1 phase motors

130

110

90 4xM6 ON 104 PCD

4xø8.5

18

CT

RS

5

67

(73.

5)

36

60 ø

40

44

60Wbraked

high torque

38

Flanged M9GCgearbox

Square M9GDgearbox



230V 1 phase versions are available for fixed applica-tions. 230V 3 phase versions are available for variablespeed applications when used with the Panasonicmicro-inverter or Lenze smd inverter.

Panasonic G-series 90W Braked Motor

➤ Rated 230V ± 10% and 50 Hz

➤ 1 phase models intermittent duty S2

➤ 3 phase models continuous duty S1

➤ Enclosure IP44


➤ Single phase models supplied with



1 phase Brake Motor 3 phase Brake MotorModel Number : M9RC90GBK4GE Model Number : M9MC90GBK4W1

Nominal Gearbox Actual Rated Braking Actual Rated Brakingspeed model speed torque torque Assembly speed torque torque Assembly Lengthr/min number @230V Nm Nm number @230V Nm Nm number L500 M9G# 3B 350 1.85 0.95 PAN GS 090 BGE 500.0 # K1 458 1.4 0.95 PAN GS 090 BPW 500.0 # K1 289300 M9G# 5B 210 3.1 1.6 PAN GS 090 BGE 300.0 # K1 275 2.4 1.6 PAN GS 090 BPW 300.0 # K1 289200 M9G# 7.5B 140 4.6 2.4 PAN GS 090 BGE 200.0 # K1 183 3.5 2.4 PAN GS 090 BPW 200.0 # K1 289150 M9G# 10B 105 5.7 2.9 PAN GS 090 BGE 150.0 # K1 138 4.4 2.9 PAN GS 090 BPW 150.0 # K1 289100 M9G# 15B 70 10.6 4.4 PAN GS 090 BGE 100.0 # K1 92 6.5 4.4 PAN GS 090 BPW 100.0 # K1 28975 M9G# 20B 53 13.3 5.5 PAN GS 090 BGE 075.0 # K1 69 8.1 5.5 PAN GS 090 BPW 075.0 # K1 28960 M9G# 25B 42 16.0 6.9 PAN GS 090 BGE 060.0 # K1 55 10.2 6.9 PAN GS 090 BPW 060.0 # K1 28950 M9G# 30B 35 19.6 8.2 PAN GS 090 BGE 050.0 # K1 46 12.2 8.2 PAN GS 090 BPW 050.0 # K1 28930 M9G# 50B* 21 19.6 13.7 PAN GS 090 BGE 030.0 # K1 27.5 19.6 13.7 PAN GS 090 BPW 030.0 # K1 28920 M9G# 75B* 14 19.6 19.1 PAN GS 090 BGE 020.0 # K1 18.3 19.6 19.1 PAN GS 090 BPW 020.0 # K1 28915 M9G# 100B* 10.5 19.6 19.6 PAN GS 090 BGE 015.0 # K1 13.8 19.6 19.6 PAN GS 090 BPW 015.0 # K1 289

12.5 M9G# 120B* 8.8 19.6 19.6 PAN GS 090 BGE 012.5 # K1 11.5 19.6 19.6 PAN GS 090 BPW 012.5 # K1 28910 M9G# 150B* 7 19.6 19.6 PAN GS 090 BGE 010.0 # K1 9.2 19.6 19.6 PAN GS 090 BPW 010.0 # K1 2897.5 M9G# 200B* 5.3 19.6 19.6 PAN GS 090 BGE 007.5 # K1 6.9 19.6 19.6 PAN GS 090 BPW 007.5 # K1 289


100 r/min flanged with 1 phase brake motor PAN GS 090 BGE 100.0 C K17.5 r/min square with 3 phase brake motor PAN GS 090 BPW 007.5 D K1


HIGHER TORQUES – available from 20 r/min and slower speeds, see previous 60W high torque pages.




ø15

h7

ø34

17

25 184

289

29

31

12 38 1

MAX

75 30

92

BRAKE CABLE 300mm

39

1.5

1.0

0.5

0 0 500 1000 1500 2000

Speed (r/min.)

Nm

230 V



Input power 194 W



duty S2

30 BRAKE CABLE 300mm

92

75 1

67

25

38

29

289

17

7

MAX

184

Ø34

67

5

136

Ø15 h7

18

4 X M6ON 104 P.C.D.

1 phase motors 3 phase motors

230 V



Input power 145 W

Rated speed 1375r/min


4xM6 ON 104 PCD90

130

110

5

4xø8.5

CT

RS

18

67

(73.

5)

36

60

34

44

90Wbraked

3.0

2.5

2.0

1.5

1.0

0.5

0 0 250 500 750 1000 1250 1500 1750 2000

Speed (r/min)

Nm

40

The Panasonic Micro-Inverter is suitable for variablespeed operation of 230V 3 phase G-series gearedmotors.

The Panasonic Micro-Inverter can be used with any 3 phase motor, rated for 230V operation.

Quiet and efficient operation is achieved as a result ofthe 12 kHz IGBT switching frequency.

Features➤ High torque capacity

➤ Good speed holding

➤ In-built and external stop/start control

➤ In-built and external forward/reverse

➤ External dynamic braking control

➤ Inverter trip output

➤ Accel/decel ramp

➤ Optional external analogue signal

➤ Optional remote speed potentiometer

Frequencypotentiometerfor speedsetting

StatusLED

Dip switchesfor parametersettings

Motorpowerconnector

ExternalI/O connector

Earthingpoint

Mains powerterminals

Accel/Decelpotentiometer

PrimaryFixing hole

Primary*Fixing hole

Secondary†Fixing hole

Front view(cover removed)

Front view(cover in place)

Rear view

Run/Stopswitch

CW/CCWswitch orexternal speedreference input

* Primary fixing hole for permanent location of inverter front cover to limit

access to dip switches and accel/decel potentiometer.

† Secondary fixing hole to allow access to dip switches and accel/decelpotentiometer.

Panasonic G-series Micro-Inverter

➤ Compact and aesthetic design


➤ Quick and easy installation

➤ approved

41

(131)

105.5

I1

COM

01

I3

I2

PO

WE

R S

UP

PLY

MO

TO

R

52.5

90

R

80.5

W U

V E

S

L2

L1

12.5

CW

4.5

60/90W

240VCCW

60

Panasonic

13

Low

STOP RUN

High 100

2xø4.5

Standard model – XEThe XE version has a built-in potentiometer for simplespeed control and quick installation. Also incorporatedare a standard range of control functions.

External speed reference model – XEATo allow greater flexibility, the XEA version will accepteither an external speed potentiometer or an 0-5V ana-logue signal.

Inverter specifications

Rated motor power (W) 25/40 60/90

Output capacity (VA) *1 112/159 195/279

Rated output current (A) 0.28/0.40 0.49/0.70

Rated output voltage *2 Three phase; 200 to 230 V

Supply voltage *3 Single phase; 200 to 230 V

Voltage tolerance ± 10%

Supply frequency 50/60 Hz ± 5%

Control method PWM; 12 kHz switching frequency

Output frequency range *4 1.0 to 120 Hz (factory preset to 60 Hz)

Acceleration/deceleration time 0.05 to 30 seconds

Overload current rating 150% continuous – 200% for 90s

Regenerative brake torque *5 100% deceleration torque – short term

DC brake Braking start frequency: 3 Hz Braking time: 0.5 sec

Frequency setting In-built potentiometer (XE) or external control (XEA)

In-built controls Start/Stop switch, CW/CCW switch, frequency range,motor thermal overload

External control (Inputs) – Start/stop, CW/CCW, Coast stop(Output): Trip signal

Protective functions Under-voltage, overcurrent, overvoltage, overload,power failure, stall prevention, motor thermal overload

Motor thermal overload setting 25 W/40 W 60 W/90 W

Ambient temperature -10oC to +40oC

Ambient humidity Relative humidity 90% max (no condensation)

Atmosphere Free from corrosive gas, mist, dust, etc.

Enclosure IP20

Ou

tpu

tra

tin

gsM

ain

ssu

pp

lyCo

ntr

ol m

eth

odA

mbi

ent

cond

itio

ns

* 1: The rated output capacity is based on a rated output voltage of 230V.* 2: The rated output voltage will never exceed the mains supply voltage.* 3: The mains supply voltage should not exceed the rated voltage of the motor* 4: When used with G-Series geared motors, never exceed 60Hz operation.* 5: The regenerative brake torque is not rated for continuous operation. No braking resistor is used.

Panasonic G-series Micro-Inverter

Type Power W Type number

Standard model25 - 40 PAN GS M1G4A2 V1XE60 - 90 PAN GS M1G9A2 V1XE

External speed reference model25 - 40 PAN GS M1G4A2 V1XEA60 - 90 PAN GS M1G9A2 V1XEA

42

Motor Supply cable Control cable External Speed Reference cable

Ordering example(10) off Panasonic Micro-InvertersModel XE 60 - 90W, with filter, 5m motor supply and 3mcontrol cables.Type nos. PAN GS M1G 9A2V1 XE

PAN B1 SF14 94PAN GS MIC P5PPAN GS MIC C3P

Panasonic G-series Micro-Inverter accessories

6

21

Ø

37

4.52 HOLES

49

70

85

97

50.5

Current rating Weight Type number

2A 0.2 kg PANB1SF1494

RFI filterTo achieve compliance to EN55011 class A (IndustrialInstallations) or class B (Domestic Installations) it is recommended that an RFI filter is used. Compliancecan be achieved for motor cables up to a maximum of15 metres when the recommended installation proce-dures are followed.

Length (m) Type number

1 PAN GS MIC X1P2 PAN GS MIC X2P3 PAN GS MIC X3P5 PAN GS MIC X5P


1 PAN GS MIC C1P2 PAN GS MIC C2P3 PAN GS MIC C3P5 PAN GS MIC C5P


1 PAN GS MIC P1P2 PAN GS MIC P2P3 PAN GS MIC P3P5 PAN GS MIC P5P

10 PAN GS MIC P10P15 PAN GS MIC P15P

43

The Panasonic Micro-Inverter offers excellent performance characteristics, with a starting torque of 200% motor full loadtorque achievable. Although designed for use with any 3 phase; 230V motor, the Micro-Inverter is the ideal controller tocompliment the Panasonic G-Series geared motor range. See graphs below for speed/torque performance details for the25W, 40W, 60W and 90W G-Series motors when operated with the Micro-Inverter.

Cont

inuou

s wor

king

rang

e30

0%

200%

100%

1800

1500

Spee

d (r/

min)

1000

500

0

0.10.20.30.4

5Hz

10Hz

15Hz

20Hz

30Hz

40Hz

50Hz

60Hz

0.5

Nm

000.10.20.3

3Hz

5Hz

10Hz

15Hz

20Hz

30Hz

40Hz

50Hz

60Hz

200% 100%

0.40.50.6NM

500

1000

1500

Spee

d (r/

min)

1800

Cont

inuou

s wor

king

rang

e

25W

G-S

erie

s

050

0

5Hz

10Hz

15Hz

20Hz

30Hz

40Hz

50Hz

60Hz

1000

1500

Spee

d (r/

min)

180010

0%

200%

Cont

inuou

swor

king

rang

e

0130.40.60.81.0

Nm 0.2

Nm1.2 1.0 0.8 0.6 0.4 0.2 1H

z 0 03Hz

5Hz

10Hz

15Hz

20Hz

30Hz

40Hz

50Hz

60Hz

200%

100%

1800

1500

1000

500

Spee

d (r/

min)

Cont

inuou

s wor

king

rang

e

90W

G-S

erie

s

40W

G-S

erie

s

* G-Series geared motors are rated for operation up to 60 Hz. Above 60 Hz performance and lifetime can not be guaranteed.

Panasonic G-series Micro-Inverters performance

60W

G-S

erie

s

44

Standard feet are available for all square gearboxes.These can be ordered and fitted to suit the requiredmounting configuration, see page 48.

Flanged geared motors with powers 60-90W do notaccept feet.

K

A

B

J 4 HOLES øV

L

D

C

H

M

P

R

N

ON W P.C.D.EQUI-SPACED4 HOLES X

A B C D H J K L M N P R V W X

6W Feet 12 8 65 35 6 17 34 60 25 3 5.5 6 ø4.8 ø70 M4

15W Feet 13 12 75 40 6 20 40 70 31 3.5 5.5 7 ø4.8 ø82 M5

25W Feet 15 14 85 45 6 23 46 80 35 3.5 – 7 ø5.5 ø94 M5

40W-90W Feet 20 20 95 50 8 28 56 90 46 3.5 – 8 ø7 ø104 M6

Dimensions

6W type No. PAN GS M6 B2


Ordering

Panasonic G-series Standard feet


40-90W type No. PAN GS M9 B2

45

A B C D H J K L M N R S T U W X Y Z

25W Feet 35 9 89 48 8 51 102 128 60 3.5 7 5.4 8.4 54 ø94 90 81 M5

40W-90W Feet 40 9 98.5 53 10 56 112 130 67 3.5 10 5.4 8.4 60 ø104 100 91 M6

K

AB

J T

S

D

C

L

Y

X

F

E

ON øW PCD

4 HOLES ZEQUI-SPACED

M

R

N

Dimensions

Side fixing feet fit to the front of the gearbox and allow360o access to the gearbox shaft. They are available forpowers 25W and higher.

See page 48 to specify the mounting position required.

Flanged geared motors with powers 60W-90W do notaccept feet.

Panasonic G-series Side fixing feet

25W type No. PAN GS M8 B3 40W-90W type No. PAN GS M9 B3

Ordering

3 p

has

e3

ph

ase

3 p

has

eB

rake

Qu

ick

Stan

dar

d23

0V23

0V40

0V1

ph

ase

Reve

rsib

le1

ph

ase

Bra

ke1

ph

ase

46

Panasonic G-series Motor data

Voltage FreqOutput Rated Rated Rated Rated Starting Starting

Pull-OutModel(V) (Hz)

Power Current Input Speed Torque Current TorqueTorque(W) (A) Power (W) (r/min) (Nm) (Nm) (Nm)

M6IA6G4GE 230 50 6 0.09 20 1225 0.044 0.12 0.047 0.062M7IA15G4GE 230 50 15 0.15 34 1225 0.11 0.23 0.09 0.14M8IA25GK4GE 230 50 25 0.23 50 1225 0.18 0.37 0.13 0.23M9IA40GK4GE 230 50 40 0.36 79 1200 0.31 0.60 0.23 0.39M9IC60GK4GE 230 50 60 0.51 118 1225 0.47 0.85 0.49 0.68M9IC90GKG4GE 230 50 90 0.67 153 1325 0.63 1.40 0.49 0.96M6RA6G4GE 230 50 6 0.1 22 1225 0.044 0.12 0.049 0.065M7RA15G4GE 230 50 15 0.17 38 1225 0.11 0.24 0.093 0.15M8RA25GK4GE 230 50 25 0.25 57 1250 0.19 0.43 0.18 0.28M9RA40GK4GE 230 50 40 0.41 94 1175 0.33 0.63 0.29 0.45M9RC60GK4GE 230 50 60 0.57 127 1300 0.44 1.05 0.56 0.83M9RC90GK4GE 230 50 90 0.84 194 1050 0.76 1.08 0.62 0.83M6RA6GB4GE 230 50 6 0.1 22 1225 0.04 0.12 0.049 0.065M7RA15GB4GE 230 50 15 0.17 38 1225 0.11 0.24 0.093 0.15M8RA25GBK4GE 230 50 25 0.25 57 1250 0.19 0.43 0.18 0.28M9RA40GBK4GE 230 50 40 0.41 94 1175 0.33 0.63 0.29 0.45M9RA60GBK4GE 230 50 60 0.57 127 1300 0.44 1.05 0.56 0.83M9RA90GBK4GE 230 50 90 0.84 194 1050 0.76 1.08 0.62 0.83M8MA25GK4CE1 400 50 25 0.12 51 1350 0.17 0.31 0.56 0.56M9MA40GK4CE1 400 50 40 0.15 62 1375 0.26 0.46 0.72 0.72M9MA60GK4CE1 400 50 60 0.21 94 1375 0.41 0.70 1.05 1.05M9MA90GK4CE1 400 50 90 0.3 132 1375 0.58 0.95 1.56 1.56M8MA25GKP4W1 400 50 25 0.26 53 1375 0.17 0.68 0.65 0.65M9MA40GKP4W1 400 50 40 0.33 70 1375 0.27 1.00 0.88 0.88M9MA60GKP4W1 400 50 60 0.46 103 1375 0.41 1.50 1.11 1.11M9MA90GKP4W1 400 50 90 0.7 145 1375 0.62 2.20 1.96 1.96M8MA25GBKP4W1 400 50 25 0.27 54 1375 0.17 0.67 0.66 0.66M9MA40GBKP4W1 400 50 40 0.32 66 1375 0.27 1.10 0.78 0.78M9MA60GBKP4W1 400 50 60 0.46 100 1375 0.41 1.50 1.18 1.18M9MA90GBKP4W1 400 50 90 0.65 145 1400 0.62 2.20 1.96 1.96

3 p

has

e3

ph

ase

3 p

has

eB

rake

Qu

ick

Stan

dar

d23

0V23

0V40

0V1

ph

ase

Reve

rsib

le1

ph

ase

Bra

ke1

ph

ase

Capacitor Rating Duty Insulation ThermalBrake Brake Brake

Model(uF/V) (IP) Class Switch

Current Input Holding(A) Power (W) Torque (Nm)

M6IA6G4GE 0.6 430 20 S1 E No n/a n/a n/aM7IA15G4GE 1.0 430 54 S1 E Yes n/a n/a n/aM8IA25GK4GE 1.5 430 54 S1 E Yes n/a n/a n/aM9IA40GK4GE 2.5 430 54 S1 E Yes n/a n/a n/aM9IC60GK4GE 4.0 430 54 S1 E Yes n/a n/a n/aM9IC90GKG4GE 4.5 430 54 S1 E Yes n/a n/a n/aM6RA6G4GE 0.6 430 20 S2* E No n/a n/a n/aM7RA15G4GE 1.2 430 50 S2* E Yes n/a n/a n/aM8RA25GK4GE 1.8 430 54 S2* E Yes n/a n/a n/aM9RA40GK4GE 3.0 430 54 S2 E Yes n/a n/a n/aM9RC60GK4GE 5.0 430 54 S2* E Yes n/a n/a n/aM9RC90GK4GE 5.5 430 54 S2 E Yes n/a n/a n/aM6RA6GB4GE 0.6 430 20 S2* E No 0.03 4 0.05M7RA15GB4GE 1.2 430 20 S2* E Yes 0.04 5 0.08M8RA25GBK4GE 1.8 430 44 S2* E Yes 0.04 6 0.10M9RA40GBK4GE 3.0 430 44 S2* E Yes 0.07 9 0.20M9RA60GBK4GE 5.0 430 44 S2* E Yes 0.08 11 0.39M9RA90GBK4GE 5.5 430 44 S2 E Yes 0.08 11 0.39M8MA25GK4CE1 n/a 54 S1 E Yes n/a n/a n/aM9MA40GK4CE1 n/a 54 S1 E Yes n/a n/a n/aM9MA60GK4CE1 n/a 54 S1 E Yes n/a n/a n/aM9MA90GK4CE1 n/a 54 S1 E Yes n/a n/a n/aM8MA25GKP4W1 n/a 54 S1 E Yes n/a n/a n/aM9MA40GKP4W1 n/a 54 S1 E Yes n/a n/a n/aM9MA60GKP4W1 n/a 54 S1 E Yes n/a n/a n/aM9MA90GKP4W1 n/a 54 S1 E Yes n/a n/a n/aM8MA25GBKP4W1 n/a 44 S1 E Yes 0.03 5 0.1M9MA40GBKP4W1 n/a 44 S1 E Yes 0.08 8 0.2M9MA60GBKP4W1 n/a 44 S1 E Yes 0.08 8 0.39M9MA90GBKP4W1 n/a 44 S1 E Yes 0.08 8 0.39

* Duty rating becomes S1 when combined with Panasonic gearbox.

Panasonic G-series Part Number Breakdown

Frame size

Motor

Type

Output

Specification

Power (W)

Gearbox type

Gear ratio i

11E

E

IMR

A

35

7 . 51 01 02 02 53 05 07 5

1 0 01 2 01 5 01 8 02 0 0

DTCS

WC

G4

BK

6789

65

2469

5000

1

M G 4

Voltage60mm

70mm

80mm

90mm

1 phase

3 phase

Quick reversible or braked

6-40W Square

60-90W Square

60-90W Square H/T

60-90W Flanged

XX

MB

Sintered 6-40W

Ball 60-90W

60-90W Flanged H/T

AC

6-40W

60-90W

*

* optional character

* optional character

Frame size

6789

60mm

70mm

80mm

90mm

Output

Bearing type

AC

6-40W

60-90W

Gearbox

Decimal Gearbox (required in addition for speeds 7.5 r/min and below)

M G B

* *

Frame size

6789

60mm

70mm

80mm

90mm

M G 1 0

BrakedTerminal box

Omit character if leadwire

3ph 230V

3ph 400V

Example90W decimal gearboxM9GC10XB

Example60W flanged high torquewith i = 75M9GS75B

Example6W 1 phase 230V brakemotorM6RA6GB4GE

1ph 230V

4850

UKGSERIES0905

Ordering fast and simple

Ordering examples: Type number

G-series geared motor, standard induction 1 phase 6W, output speed of 50 r/min, PAN GS 006 IGE 050.0 AL2lead wire position 2.

G-series geared motor, 3 phase 400V high torque 60W with square gearhead, PAN GS 060 MCE 002.0 TKAoutput speed 2 r/min, terminal box position 1, foot position 1 (specify standardor side feet)

- Micro-inverter PAN GS M1G 9A2XE- RFI filter PAN B1 SF 1494- Motor cables - 3m PAN GS MIC P3P- Control cables - 3m PAN GS MIC C3P- External speed reference cable - 3m(only used with PAN GS M1 G4A2 V1XEA or PAN GS MIC X3P

PAN GS M1 G9A2 V1XEA)

www.Lenze.co.uk

Lenze LtdCaxton RdBedford MK41 0TSUnited KingdomTel: +44 (0)1234 321321Email: [email protected]

For European sales & serviceaddresses see our website

Panasonic G-series geared motors are built to orderfrom our extensive stocks of motors and gearheads.Fast shipment is normal and same day shipment isoften possible.

When placing an order, please state the type number,quantity required, gearbox mounting position and footmounting position (if required). See page 48 for details.

Other products available from Panasonsic

B-series A-series S-series

Example60W 230V 3 phase braked, 7.5r/min,square gearbox, mounting position 1,foot position 2PAN GS 060 BPW 007.5 DKB

4948

Example

Foot position 2

Terminal boxposition 2

Panasonic G-series Assembly part number coding

Foot positions

The foot position is described when viewed from the output shaft end of thegeared motor.

Unless specified when ordering, the standard foot position 1 will be supplied.

Terminal box/lead wire positions

The terminal box position is described when viewed from the output shaft end of the geared motor. Unless speci-fied when ordering, the standard terminal box position 1 will be supplied.

POS 1 POS 2 POS 3 POS 4

POS 1 POS 2 POS 3 POS 4

G SP A N .

Power (W)

006 015 025 040 060 090

Nominal output speed r/min

500.0 300.0 200.0 150.0 100.0 075.0060.0 050.0 030.0 020.0 015.0 012.5010.0 008.0 007.5 006.5 005.0 003.0002.0 001.5 001.3 001.0 000.8

Motor type

IGE 1ph 230V

MCE 3ph 400VRGE

3ph 230V

BPW 3ph 230V brake motorBGE 1ph 230V brake motorMPW

1ph 230V quick reversible

Gearbox type

ADTCS

6-40W Square

Foot pos 1

Foot pos 2

Foot pos 3

Foot pos 4

60-90W Square

60-90W Square H/T

90-90W Flanged

60-90W Flanged H/T

Mounting

position

1234

without

feetKL Leadwire

Terminal box

Termination

or Mounting

with feet

Mountingposition 1

Foot pos 1

Foot pos 2

Foot pos 3

Foot pos 4

Mountingposition 2

Foot pos 1

Foot pos 2

Foot pos 3

Foot pos 4

Mountingposition 3

Foot pos 1

Foot pos 2

Foot pos 3

Foot pos 4

Mountingposition 4

IJKL

MNOP

EFGH

ABCD

49

Panasonic G-series Gearbox data

Fitting and operating instructionsPanasonic AC geared motors comprise a totallyenclosed standard motor with grease lubricated bear-ings and a grease-filled gearbox, neither of which willrequire any maintenance during the running of theunit under normal operating conditions. On installa-tion, the mounting of the motor must allow a free flowof cooling air over the surface of the motor. This condi-tion must be maintained under all circumstances. Themethod of mounting should also limit the radial forceapplied to the geared output shaft.

Fitting instructionsFor models 40W and below, it is recommended that theoutput shaft bearing housing should be used as alocating spigot for mounting the unit. Firstly, removethe four fixing nuts, taking care that the motor andgearbox do not separate. The four fixing bolts shouldbe used to secure the unit to the machine.Alternatively, foot mounts can be supplied to easemounting.

For models 60W and above, it is recommended that theshaft spigot is used for location, with the four mount-ing clearance holes on the gearbox used for securingthe unit to the machine. When tightening the fixingbolts follow the sequence shown in the diagram.In the event of the unit being separated, this will inval-idate the warranty.

It is recommended that a new O-ring is then fitted toensure proper sealing.

Gearbox efficiency

IMPORTANTWhen face mounting the geared motor to an assembly,DO NOT remove or twist the gearhead from or on themotor. This will cause the O-ring to deform resulting ingrease leakage when reassembled. If the mounting ori-entation is modified or the identification label removedfrom the geared motor, warranty of the goods may beinvalidated.

TypePermissible Permissibleradial load axial load

(N) (N)

60 mm2 6W 98 29

70 mm2 15W 196 39

80 mm2 25W 294 49

90 mm2 40W 392 98

90 mm2 60-90W 588 147

90 mm2 HT 60-90W 784 147

Spare 'O' rings

Motor power Motor size Type number

6W 60 mm2 PAN GS ORING 60



40-90W 90 mm2 PAN GS ORING 90

RatioSize Type

3 - 9 10 - 18 20 - 60 75 - 180 200 10:1intermediate

60mm2 M6GAxxxB70mm2 M7GAxxxB

81% 75% 70% n/a 56%80mm2 M8GAxxxBM9GAxxxBM9GCxxxB

81% 75% 70%90mm2 M9GDxxxB65% 58%M9GSxxxB

n/a 70%M9GTxxxB60mm2 M6GAxxxM70mm2 M7GAxxxM

68% 63% 58% n/a 46%80mm2 M8GAxxxM90mm2 M9GAxxxMM

etl B

ush

Bal

l Bea

rin

gsB

eari

ngs

Tightening of fixing bolts

Radial and axial loadsRadial load shows how much bending load may beapplied to the output shaft of the gearbox at 1/2length position. This applies to the application whenthe motor and machine areconnected with a chain or beltbut does not apply when a softflexible coupling is used. Sinceexcessive radial and axial loadsaffect the life of the gearedmotor, please do not exceed themaximum stated loads.

panasonic g-series blue - davies craigm6ga 10xm* additional gearbox m6ga 10xm must be used for...

Documents