panel bender ivagnin# p4-1612 «meleh · uts of 410 n/ mm2 2.00 mm uts of 580 n/ mm2 1.25 mm uts of...
TRANSCRIPT
Panel Bender
P4-1612 Ivagnin#
«Meleh Manufactory year 1992 CE YES `MC3
1600 mm
2000 mm
127 mm
Technical Features
Maximum bend lenght
Maximum diagonal that can be rotated
Maximum bend height
2.00 mm
1.20 mm
3,00 mm
0.5 mm
UTS of 410 N/ mm2
UTS of 580 N/ mm2
UTS of 265 N/ mm2
Minimum thickness
Configuration
YES NO
YES NO
YES NO
request
Revision of blankholder tooling
Revision of counterblade
Bending Biade new *
Optional " Blades can be changed upon
P4-1612 (HPT2014+P4-16121SAIIA.MLA.CLA+RPE031)
Maximum bending thickness according with this configuration
HPT201 - Feeder-unloader
MLA - Device for the nnanual preparation of the blankholder
CLA- Auxiliary bending tool for positive bends
RPE- chiller
JOBP4.DIARIO - Software for managing production Overauling activity
mechanical overhaul
hardware upgrade
software upgrade
Ecomstation (OS/2)
Safety devices update
YES NO
YES NO
YES NO
YES NO
YES NO
-44-593e6teend- 4 6.0.00o, o C
Any pictures shown herein are for information only and are in no way binding, Salvagnini accepts no responsibility for their corresponding to the systems supplied. Salvagnini reserved the right to modify this data without prior notice.
salvagnini Manufactory year 1997
CE Yes 1( Panel Bender P4-1812 No
Technical Features
Maximum bend lenght 1850 mm
Maximum diagonal that can be rotated 2150 mm
Maximum bend height 127 mm
Maximum bending thickness according with this configuration
UTS of 410 N/ mm2 2.00 mm
UTS of 580 N/ mm2 1.25 mm
UTS of 265 N/ mm2 3.00 mm
Minimum thickness
0.5 mm
Configuration
T271510 - Scissor table
ADP2715 - Automatic feeder-destacker
MILA - Manual blankholder
CLA - Auxiliary bending tool for positive bends
SAP2715 - Panel unloader/accumulator
P4-1812 (T271510+ADP2715+P4-1812. LI .LS .MLA.CLA+SAP2715+R81)
FAG BEL/S/270
OFFICE.P4 - Salvagnini software for office
CNC- Salvagnini OS/2
Overhauling activity R81- chiller
Revision of blankholder tooling Yes N( No Imechanical overhaul Yes N( No
Counterblade divided and revised Yes N( No Ihardware upgrade Yes N( No
Bending Biade new * Yes N( No Isoftware upgrade Yes 3( No
Yes 3( Optional * Blades can be changed upon request Ecomstation (OS/2)
Safety devices update
No
Yes N( No
Artv pictures shown herein are for information only and are in no way binding; Salvagnini accepts no responsibilitv for their c6rresponding to the systems supplieci. SalVagnirti reserved the right to modifv this data without prior notice
246.°0 di 012t
Any pictures shown herein are for information only and are in no way binding, Salvagnini accepts no responsibility for their corresponding to the systems supplied. Salvagnini reserved the right to modify this data without prior notice.
Panel Bender
P4-2512
YES NO
YES NO
YES NO
YES NO
YES NO
mechanical overhaul
hardware upgrade
software upgrade
Window XP
Safety devices update
Revision of blankholder tooling YES NO
Revision of counterblade YES NO
Bending Biade new * YES NO
Optional * Blades can be changed upon request
Manufactory year CE YES NO 2001
P4-2512 (HPT2715+P4-2512.LS.LI.MMACHNT.CLA.ALA25/450/200+R81+JOBP4.DIARIO)
Overauling activity
Technical Features
Maximum bend lenght
Maximum diagonal that can be rotated
Maximum bend height
Maximum bending thickness according with this confiduration
UTS of 410 N/ mm2
UTS of 580 N/ mm2
UTS of 265 N/ mm2
Minimum thickness
Configuration
HPT2715 - Feeder-unloader
ALA - Programmable blankholder
CLA-Auxiliary bending tool for positive bends
R81- chiller
MMACHNT - Management and control system
JOBP4.DIARIO - Software for managing production
2500 mm
2700 mm
127 mm
2.00 mm
1.25 mm
3,00 mm
0.5 mm