panels - evolve furniture group · 2020-04-09 · technical features of evolve panels: • evolve...

evolvefurnituregroup.com 9Evolve Customer Support available at 856.552.4000, 888.827.2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856.552.4001.

panels

10 evolvefurnituregroup.com Evolve Customer Support available at 856.552.4000, 888.827.2500, from 8:30 am - 5:30 pm Eastern time, or fax at 856.552.4001.

PANELS TECHNICAL INFORMATION

TECHNICAL FEATURES OF EVOLVE PANELS:

• Evolve Panels are 2 7⁄8” thick.

• An aluminum low profile top cap is included with the panel.

• Base Raceway will allow for 140 data cables without electrical, or 48 data cables with electrical.

• Beltline Raceway will allow for 65 data cables without electrical or 54 data cables with electrical.

• 90 degree post extension will allow for 45 data cables without electric and 25 data cables with electric.

• Raceway knockout openings are 1.38” x 2.71”.

• Acoustic Rating: .65 = NRC - Noise Reduction Coefficient

• STC: 23 = Sound Transmission Coefficient

BASIC FEATURES OF EVOLVE PANELS:

• Evolve Segmented Panels are available in four (4) basic heights: 30”, 42”, 54” and 66”; and eight (8) widths: 18”, 24”, 30” 36”, 42”, 48”, 54” High and 60”.

• Evolve Monolithic Panels are available in four (4) basic heights: 42”, 48”, 54” and 66”; and eight (8) widths: 18”, 24”, 30” 36”, 42”, 48”, 54” and 60”.

• Evolve Panels must include the same segmentation on both sides of the panel. Cannot be Monolithic on one side and Segmented on the other.

• Opposite sides of each Fabric Module may have a different fabric within the same grade at no upcharge.

• If different grades of fabric are used on one panel, the entire panel must be priced at the highest grade.

• There is no panel creep in a straight Panel-to-Panel configuration; however, a corner post (2, 3, 4 way) will add 3.25” inches to a panel run.

• All Fabric Acoustic Panels (EVPFA) are composed of a 6” raceway module and a 24” base-height module which create the EVPFA30. Subsequent heights are created by adding either a 12” high module to create an EVPFA42 or a 24” high module to create an EVPFA54. The addition of both 12” and 24” modules creates a EVPFA66.

• In contrast, a Premium Panel (EVPFP) is composed of a 6” raceway module, a 24” base-height module and either two (2) or three (3) 12” modules which make up the two premium heights: EVPFP54 and EVPFP66.

• All Panels available with Aluminum trim as a standard option.

• Individual fabric covered acoustic modules incorporated into a rigid steel frame.

• Raceway covers included with panels

• Beltline Panels contain a 6” Power Belt Module that is metal with knockouts on both sides.

BASIC FEATURES OF EXTENSION MODULES:

• Stackability: Evolve Panels can be increased in height in 6”, 12”, 18” or 24” increments. See Extension Module (pages 82-90) for part numbers.

• Panel Extension Modules stack on the top of a Panel.

• Modules can be stacked to add privacy or divide space.

• Opposite sides of a fabric module may have a different fabric within the same grade at no upcharge.

• If different grades of fabric are used on one Panel, the entire Module must be priced at highest grade.

GENERAL WARRANTY INFORMATION:

• Panel and tackboard textiles, adjustable keyboard mechanisms, tasklights and electrical devices = ten (10) Years

• Other parts = Lifetime Warranty


MONOLITHIC PANELS - PAGES 20-25

Monolithic Panel

EVPFAM42 EVPFAM48 EVPFAM54 EVPFAM66

Monolithic Light Panel

EVPLFAM42 EVPLFAM48 EVPLFAM54 EVPLFAM66

Monolithic Beltline Powered Panel

EVPBFAM42 EVPBFAM54 EVPBFAM66

Monolithic Beltline Powered Light Panel

EVPBLFAM42 EVPBLFAM54 EVPBLFAM66

Monolithic Beltline Powered Chimney Panel

EVPBCFAM42 EVPBCFAM54 EVPBCFAM66

Chimney Jummper Cable Kit

EVE8CPCP

Monolithic Beltline Non-Powered Panel

EVPBFFAM54 EVPBFFAM66

Monolithic Beltline Non-Powered Light Panel

EVPBLFFAM54 EVPBLFFAM66

SEGMENTED PANELS - PAGES 26-31

Segmented Panel

EVPFA30 EVPFA42 EVPFA54 EVPFA66 EVPFA66S

Segmented Light Panel

EVPLFA30 EVPLFA42 EVPLFA54 EVPLFA66 EVPLFA66S

Segmented Premium Panel

EVPFP54 EVPFP66

Segmented Premium Light Panel

EVPLFP54 EVPLFP66

Segmented Beltline Powered Panel

EVPBFA54 EVPBFA66

Segmented Beltline Powered Light Panel

EVPBLFA54 EVPBLFA66

Segmented Beltline Powered Chimney Panel

EVPBCFA54 EVPBCFA66


EVE8CPCP

Segmented Beltline Non-Powered Panel

EVPBFFA54 EVPBFFA66

Segmented Beltline Non-Powered Light Panel

EVPBLFFA54 EVPBLFFA66

PANELS TYPES


PARTLY GLAZED - TEMPERED GLASS PANELS - PAGES 32-41

Monolithic 12”H Glazed Panel

EVPMGTU48 EVPMGTU54 EVPMGTU66

Monolithic 12”H Glazed Light Panel

EVPLMGTU48 EVPLMGTU54 EVPLMGTU66

Segmented 12”H Glazed Panel

EVPFGTU66

Segmented 12”H Glazed Light Panel

EVPLFGTU66

Segmented 12”H Glazed Premium Panel

EVPFPGTU54 EVPFPGTU66

Segmented 12”H Glazed Premium Light Panel

EVPLFPGTU54 EVPLFPGTU66

Partly Glazed Panel

EVPFGT42 EVPFGT54 EVPFGT66

Partly Glazed Light Panel

EVPLFGT42 EVPLFGT54 EVPLFGT66

Partly Glazed Panel - 36”H

EVPFGTX66

Partly Glazed Light Panel - 36”H

EVPLFGTX66

Partly Glazed Beltline Powered Panel

EVPBFGT54 EVPBFGT66

Partly Glazed Beltline Powered Light Panel

EVPBLFGT54 EVPBLFGT66

Partly Glazed Beltline Powered Chimney Panel

EVPBCFGT54 EVPBCFGT66


EVE8CPCP

Partly Glazed Premium Panel

EVPFPGT54 EVPFPGT66

Partly Glazed Premium Light Panel

EVPLFPGT54 EVPLFPGT66

PANELS TYPES


FULLY GLAZED - TEMPERED GLASS PANELS - PAGES 42-45

Fully Monolithic Panel

EVPXGT42 EVPXGT48 EVPXGT54 EVPXGT66

Fully Monolithic Light Panel

EVPLXGT42 EVPLXGT48 EVPLXGT54 EVPLXGT66

Fully Glazed Segmented Panel

EVPGT54

Fully Glazed Segmented Light Panel

EVPLGT54

Fully Glazed Premium Panel

EVPGPT42 EVPGPT54 EVPGPT66

Fully Glazed Premium Light Panel

EVPLGPT42 EVPLGPT54 EVPLGPT66

PASS-THRU SLIDING DOOR - PAGES 46-47

Pass-Thru Sliding Door Glazed Panel

EVPFSG54 EVPFSG66 EVPFPSG66

Fabric Glazed Pass-Thru Sliding Door Panel

EVPFSGX42 EVPFSGX54 EVPFSGX66

PANELS TYPES


SLATWALL PANELS - PAGES 48-54

Slatwall Panel - Single Sided

EVPF1S42 EVPF1S54 EVPF1S66 EVPF1S66M

Slatwall Light Panel - Single Sided

EVPLF1S42 EVPLF1S54 EVPLF1S66 EVPLF1S66M

Slatwall Panel - Double Sided

EVPF2S42 EVPF2S54 EVPF2S66 EVPF2S66M

Slatwall Light Panel - Double Sided

EVPLF2S42 EVPLF2S54 EVPLF2S66 EVPLF2S66M

Frameless Slatwall Panel - Double Sided

EVPS2FA42 EVPS2FA54 EVPS2FA66

Frameless Slatwall Beltline Powered Panel - DS

EVPBSFA42 EVPBSFA54 EVPBSFA66

Frameless Slatwall Beltline Powered Light Panel - DS

EVPBLSFA42 EVPBLSFA54 EVPBLSFA66

Frameless Slatwall Beltline Powered Chimney Panel - Double Sided

EVPBCSFA42 EVPBCSFA54 EVPBCSFA66


EVE8CPCP

WRITE BOARD PANELS - PAGES 55-56

Write Board Panel - Single Sided

EVPF1W54 EVPF1W66

Write Board Light Panel - Single Sided

EVPLF1W54 EVPLF1W66

Write Board Panel - Double Sided

EVPF2W54 EVPF2W66

Write Board Light Panel - Double Sided

EVPLF2W54 EVPLF2W66

PANELS TYPES


LAMINATE PANELS - PAGES 57-60

Laminate Panel - Single Sided

EVPH1S30 EVPH1S42 EVPH1S54 EVPH1S66

Laminate Light Panel - Single Sided

EVPLH1S30 EVPLH1S42 EVPLH1S54 EVPLH1S66

Laminate Panel - Double Sided

EVPH2S30 EVPH2S42 EVPH2S54 EVPH2S66

Laminate Light Panel - Double Sided

EVPLH2S30 EVPLH2S42 EVPLH2S54 EVPLH2S66

AIRFLOW PANELS - PAGES 61-64

Airflow Panel

EVPFAF30 EVPFAF42 EVPFAF54 EVPFAF66

Airflow Light Panel

EVPLFAF30 EVPLFAF42 EVPLFAF54 EVPLFAF66

Airflow Premium Panel

EVPFPAF54 EVPFPAF66

Airflow Premium Light Panel

EVPFPAF42 EVPFPAF66

Airflow Middle Premium Panel

EVPFPMAF54 EVPFPMAF66

Airflow Middle Premium Light Panel

EVPLFPMAF66

METAL SKIN PANELS - PAGES 65-68

Metal Skin Panel - Single Sided

EVPM1S30 EVPM1S42 EVPM1S54 EVPM1S66

Metal Skin Light Panel - Single Sided

EVPLM1S30 EVPLM1S42 EVPLM1S54 EVPLM1S66

Metal Skin Panel - Double Sided

EVPM2S30 EVPM2S42 EVPM2S54 EVPM2S66

Metal Skin Light Panel - Double Sided

EVPLM2S30 EVPLM2S42 EVPLM2S54 EVPLM2S66

PANELS TYPES


OPEN PANELS - PAGES 69-74

Open Bottom Panel

EVPFOL30 EVPFOL42 EVPFOL54 EVPFOL66

Open Bottom Light Panel

EVPLFOL30 EVPLFOL42 EVPLFOL54 EVPLFOL66

Open Bottom Premium Panel

EVPFPOL54 EVPFPOL66

Open Bottom Premium Light Panel

EVPLFPOL54 EVPLFPOL66

Open Middle Panel - 12”H Opening

EVPFO54 EVPFO66

Open Middle Light Panel - 12”H Opening

EVPLFO54 EVPLFO66

Open Middle Premium Panel - 12”H Opening

EVPFPO66

Open Middle Premium Light Panel - 12”H Opening

EVPLFPO66

Open Middle Panel - 24”H Opening

EVPFOX54 EVPFOX66

Open Middle Light Panel - 24”H Opening

EVPLFOX54 EVPLFOX66

NO RACEWAY PANELS - PAGES 75-86

Segmented

EVPFA3018NR

Monolithic

EVPFAM4218NR

Laminite - Single Sided

EVPH1S3018NR

Laminite - Double Sided

EVPH2S3018NR

Fully Glazed Monolithic

EVPXGT9018NR

Inline Connector

EVPIC30NR

End of Run

EVPERA30NR

Corner Post - One Way

EVPCPA130NR

Inline Corner Post - Two Way

EVPIPA230NR

Corner Post - Two Way

EVPCPA230PNR

Corner Post - Three Way

EVPCPA330PNR

Corner Post - Four Way

EVPCPA430PNR

PANELS TYPES


1” LAMINATE PANELS - PAGES 87-90

1” Laminate End Panel

EVLEPR42

1” Laminate Middle Panel

EVLMP42

1” Laminate End Panel w/ Accessory Rail

EVLEPR42A

1” Laminate Middle Panel w/ Accessory Rail

EVLMP42A

Double Inline Panel Connector

EVPDIC42

Beltline DoubleInline Panel Connector

EVPBDIC42

Double Inline Connector Trim

EVPDVTF42

Double Inline Panel Connector Top Trim - Aluminum

EVPTTA25

DOOR PANELS - PAGES 91-92

Door Panel - Solid

EVPDS84 EVPDS90

Knob Lock Set

EVPDSL01

Lever Lock Set

EVPDSL02

Sliding Door Lock

EVPDSLLOCK

Sliding Privacy Door

EVPDSL66 EVPDSL81

Mini Panel Kit

EVMPK02

High Profile Foot

EVHHF01

PANELS TYPES


This page provides an exploded view of a sample configuration highlighting each Panel component required when specifying this configuration.

Components

A. EVPERA66 End-of-Run Kit (Wall mount) Note: adds 1” to the width of a Panel Run.

B. EVPFA6636 Segmented Panel

C. EVPIC66 Inline Panel Connector

D. EVPCPA266 Two-Way Corner Post Note: Trim kit included. Post Connectors can be custom manufactured with or without slots. Contact your Evolve Customer Support Representative for a special quote.

E. EVPVC66 Variable-Height Connector Note: Connector height must reference taller Panel.

F. EVPTVA24 Panel Trim Variable-Height

G. EVPFA4236 Segmented Panel

PANELS CONFIGURATION

A

B

C

D

E

F

G


This page provides an exploded view of a sample configuration highlighting each Beltline Power Panel component required when specifying this configuration.

Components

A. EVPERA66 End-of-Run Kit (Wall mount) Note: adds 1” to the width of a Panel Run.

B. EVPBCFAM6636 Monolithic Beltline Powered Chimney Panel

C. EVPBIC66 Inline Panel Connector for Beltline Electric Panels

D. EVPBIPA266 Two-Way Corner Post for Beltline Electric Panels

Note: Trim kit included. Post Connectors can be custom manufactured with or without slots. Contact your Evolve Customer Support Representative for a special quote. Note: All beltline post connectors come with PVC covers to install at beltline height on all sides.

E. EVPVC66 Variable-Height Connector for Beltline Electric Panels Note: Connector height must reference taller Panel.

F. EVPTEA24 Panel Extension Trim

G. EVPBFAM4236 Monolithic Beltline Powered Panel

PANELS CONFIGURATION

A

B

C

D

E

F

G


EVPFAM - MONOLITHIC PANEL

• Monolithic Panel incorporates fabric modules within a solid steel frame.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.• If different grades of fabric are used on one panel, the entire panel must be priced

at highest grade.

• An aluminum low profile top cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H or 24”H

increments. See Extension Module (pages 82-90) for part numbers.

DESCRIPTION PRODUCT CODE LIST PRICE DIMENSIONS/INCHES Gr1 Gr2 H W D

Monolithic Panel - 42” High EVPFAM4218 264 288 42 18 2 7⁄8 EVPFAM4224 282 309 42 24 2 7⁄8 EVPFAM4230 324 359 42 30 2 7⁄8 EVPFAM4236 345 385 42 36 2 7⁄8 EVPFAM4242 382 430 42 42 2 7⁄8 EVPFAM4248 416 470 42 48 2 7⁄8 EVPFAM4254 457 515 42 54 2 7⁄8 EVPFAM4260 495 559 42 60 2 7⁄8




PANELS MONOLITHIC


EVPLFAM - MONOLITHIC LIGHT PANEL

• Monolithic Light Panel incorporates fabric modules within a solid steel frame.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.

• An aluminum low profile top cap is included. • Stackability: Evolve Light panels can be increased in height in 6”H, 12”H, 18”H or

24”H increments. See Extension Module (pages 82-90) for part numbers.


Monolithic Light Panel - 42” High EVPLFAM4218 253 274 42 18 2 7⁄8 EVPLFAM4224 266 296 42 24 2 7⁄8 EVPLFAM4230 306 341 42 30 2 7⁄8 EVPLFAM4236 327 367 42 36 2 7⁄8 EVPLFAM4242 364 408 42 42 2 7⁄8 EVPLFAM4248 395 446 42 48 2 7⁄8 EVPLFAM4254 435 490 42 54 2 7⁄8 EVPLFAM4260 471 531 42 60 2 7⁄8

Monolithic Light Panel - 48” High EVPLFAM4818 256 278 48 18 2 7⁄8 EVPLFAM4824 280 307 48 24 2 7⁄8 EVPLFAM4830 324 358 48 30 2 7⁄8 EVPLFAM4836 352 391 48 36 2 7⁄8 EVPLFAM4842 393 438 48 42 2 7⁄8 EVPLFAM4848 427 477 48 48 2 7⁄8 EVPLFAM4854 473 528 48 54 2 7⁄ EVPLFAM4860 513 575 48 60 2 7⁄8



PANELS MONOLITHIC


EVPBFAM - MONOLITHIC BELTLINE POWERED PANEL

• Monolithic Beltline Powered Panel incorporates fabric modules with a power beltline raceway, within a solid steel frame.

• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts on both side.

• A Chimney Panel is required to run electric and data from the base to belt.• Beltline Connectors must be used in conjunction with beltline panels.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.

• If different grades of fabric are used on one panel, the entire panel must be priced at highest grade.




Monolithic Beltline Powered Panel - 42” High EVPBFAM4224 349 367 42 24 2 7⁄8 24” Fabric /6” Power Belt /6” Fabric EVPBFAM4230 412 434 42 30 2 7⁄8 EVPBFAM4236 470 495 42 36 2 7⁄8 EVPBFAM4242 529 559 42 42 2 7⁄8 EVPBFAM4248 586 618 42 48 2 7⁄8 EVPBFAM4254 642 678 42 54 2 7⁄8 EVPBFAM4260 700 740 42 60 2 7⁄8



PANELS MONOLITHIC


EVPBLFAM - MONOLITHIC BELTLINE POWERED LIGHT PANEL

• Monolithic Beltline Powered Light Panel incorporates fabric modules with a power beltline raceway within a solid steel frame

• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts on both sides.

• There is no base raceway in Light Panels to accommodate electrical• Light Beltline Panel Connectors must be used in conjunction with Light Beltline

Panels.• Fabric covered modules are tackable and acoustical.

• Opposite sides of each panel may have a different fabric within the same grade at no upcharge.





Monolithic Beltline Powered Light EVPBLFAM4224 331 349 42 24 2 7⁄8 Panel - 42” High EVPBLFAM4230 392 412 42 30 2 7⁄8 24” Fabric /6” Power Belt /6” Fabric EVPBLFAM4236 446 472 42 36 2 7⁄8 EVPBLFAM4242 502 531 42 42 2 7⁄8 EVPBLFAM4248 557 588 42 48 2 7⁄8 EVPBLFAM4254 610 647 42 54 2 7⁄8 EVPBLFAM4260 665 705 42 60 2 7⁄8



PANELS MONOLITHIC


EVPBCFAM - MONOLITHIC BELTLINE POWERED CHIMNEY PANEL

• Monolithic Chimney Beltline Powered Panel incorporates fabric modules with a power beltline raceway within a solid steel frame.

• A Chimney Panel is required to run electric and data from the base to belt.• Separate electric harness required to go from base to belt (see EVE8CPCP).• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts

on both sides.• Beltline Connectors must be used in conjunction with beltline panels.• Fabric covered modules are tackable and acoustical.




increments. See Extension Module listings for part numbers


Monolithic Beltline Powered EVPBCFAM4236 528 555 42 36 2 7⁄8 Chimney Panel - 42” High EVPBCFAM4242 588 617 42 42 2 7⁄8 24” Fabric Chimney /6” Power Belt /6” Fabric



EVE8CPCP - CHIMNEY PANEL JUMPER CABLE KIT

• Contains two (2) 17” flexible harnesses and one (1) “I” connector.• Used to connect electric from the base to the beltline raceway in Beltline Powered

Chimney panel.• Must use in conjunction with base power distribution harness and beltline power

distribution harness (sold separately)

DESCRIPTION PRODUCT CODE LIST PRICE DIMENSIONS/INCHES H W D

Chimney Panel Jumper Cable Kit EVE8CPCP 248

PANELS MONOLITHIC


EVPBFFAM - MONOLITHIC BELTLINE NON-POWERED PANEL

• Monolithic Beltline Non-Powered Panel incorporates fabric modules within a solid steel frame.

• Electrical cannot pass through panel at the beltline level.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.




Monolithic Beltline EVPBFFAM5424 419 448 54 24 2 7⁄8 Non-Powered Panel - 54” High EVPBFFAM5430 492 525 54 30 2 7⁄8 24” Fabric /6” Fabric /18” Fabric EVPBFFAM5436 555 593 54 36 2 7⁄8 EVPBFFAM5442 624 669 54 42 2 7⁄8 EVPBFFAM5448 685 738 54 48 2 7⁄8 EVPBFFAM5454 752 810 54 54 2 7⁄8 EVPBFFAM5460 816 880 54 60 2 7⁄8

Monolithic Beltline EVPBFFAM6624 496 543 66 24 2 7⁄8 Non-Powered Panel - 66” High EVPBFFAM6630 579 634 66 30 2 7⁄8 24” Fabric /6” Fabric /30” Fabric EVPBFFAM6636 655 719 66 36 2 7⁄8 EVPBFFAM6642 738 814 66 42 2 7⁄8 EVPBFFAM6648 815 900 66 48 2 7⁄8 EVPBFFAM6654 894 988 66 54 2 7⁄8 EVPBFFAM6660 973 1077 66 60 2 7⁄8

EVPBLFFAM - MONOLITHIC BELTLINE NON-POWERED LIGHT PANEL

• Monolithic Beltline Non-Powered Light Panel incorporates all fabric modules within a solid steel frame.

• There is no base raceway in Light Panels to accommodate electrical.• Electrical cannot pass through panel at the beltline level.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Monolithic Beltline Non-Powered EVPBLFFAM5424 385 414 54 24 2 7⁄8 Light Panel - 54” High EVPBLFFAM5430 454 489 54 30 2 7⁄8 24” Fabric /6” Fabric /18” Fabric EVPBLFFAM5436 510 548 54 36 2 7⁄8 EVPBLFFAM5442 571 618 54 42 2 7⁄8 EVPBLFFAM5448 631 682 54 48 2 7⁄8 EVPBLFFAM5454 694 750 54 54 2 7⁄8 EVPBLFFAM5460 750 814 54 60 2 7⁄8

Monolithic Beltline Non-Powered EVPBLFFAM6624 461 509 66 24 2 7⁄8 Light Panel - 66” High EVPBLFFAM6630 537 593 66 30 2 7⁄8 24” Fabric /6” Fabric /30” Fabric EVPBLFFAM6636 608 674 66 36 2 7⁄8 EVPBLFFAM6642 685 763 66 42 2 7⁄8 EVPBLFFAM6648 757 843 66 48 2 7⁄8 EVPBLFFAM6654 831 925 66 54 2 7⁄8 EVPBLFFAM6660 904 1008 66 60 2 7⁄8

PANELS MONOLITHIC


EVPFA - SEGMENTED PANEL

• Segmented Panel incorporates fabric modules within a solid steel frame.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.




Segmented Panel - 30” High EVPFA3018 257 266 30 18 2 7⁄8 EVPFA3024 266 282 30 24 2 7⁄8 EVPFA3030 298 313 30 30 2 7⁄8 EVPFA3036 323 341 30 36 2 7⁄8 EVPFA3042 345 368 30 42 2 7⁄8 EVPFA3048 381 406 30 48 2 7⁄8 EVPFA3054 411 439 30 54 2 7⁄8 EVPFA3060 441 473 30 60 2 7⁄8




Segmented Panel - 66” High EVPFA6618S 385 412 66 18 2 7⁄8 EVPFA6624S 414 450 66 24 2 7⁄8 EVPFA6630S 459 500 66 30 2 7⁄8 EVPFA6636S 538 589 66 36 2 7⁄8 EVPFA6642S 606 663 66 42 2 7⁄8 EVPFA6648S 651 715 66 48 2 7⁄8 EVPFA6654S 707 778 66 54 2 7⁄8 EVPFA6660S 766 844 66 60 2 7⁄8

PANELS SEGMENTED


EVPLFA - SEGMENTED LIGHT PANEL

• Segmented Light Panel incorporates fabric modules within a solid steel frame.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.




Segmented Light Panel - 30” High EVPLFA3018 244 255 30 18 2 7⁄8 EVPLFA3024 255 266 30 24 2 7⁄8 EVPLFA3030 283 299 30 30 2 7⁄8 EVPLFA3036 305 324 30 36 2 7⁄8 EVPLFA3042 327 349 30 42 2 7⁄8 EVPLFA3048 362 387 30 48 2 7⁄8 EVPLFA3054 391 417 30 54 2 7⁄8 EVPLFA3060 419 450 30 60 2 7⁄8




Segmented Light Panel - 66” High EVPLFA6618S 367 392 66 18 2 7⁄8 EVPLFA6624S 392 427 66 24 2 7⁄8 EVPLFA6630S 436 476 66 30 2 7⁄8 EVPLFA6636S 512 560 66 36 2 7⁄8 EVPLFA6642S 577 630 66 42 2 7⁄8 EVPLFA6648S 618 678 66 48 2 7⁄8 EVPLFA6654S 672 740 66 54 2 7⁄8 EVPLFA6660S 728 802 66 60 2 7⁄8

PANELS SEGMENTED


EVPFP - SEGMENTED PREMIUM PANEL

• Segmented Premium Panel incorporates fabric modules within a solid steel frame.• Segmented Premium panels incorporate 12” H acoustic modules aboove 24”base

module , plus 6” H base raceway.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.




Segmented Premium Panel - 54” High EVPFP5418 359 381 54 18 2 7⁄8 EVPFP5424 381 408 54 24 2 7⁄8 EVPFP5430 420 453 54 30 2 7⁄8 EVPFP5436 495 534 54 36 2 7⁄8 EVPFP5442 559 604 54 42 2 7⁄8 EVPFP5448 598 648 54 48 2 7⁄8 EVPFP5454 634 693 54 54 2 7⁄8 EVPFP5460 671 734 54 60 2 7⁄8

Segmented Premium Panel - 66” High EVPFP6618 451 477 66 18 2 7⁄8 EVPFP6624 470 504 66 24 2 7⁄8 EVPFP6630 511 555 66 30 2 7⁄8 EVPFP6636 541 592 66 36 2 7⁄8 EVPFP6642 645 702 66 42 2 7⁄8 EVPFP6648 706 771 66 48 2 7⁄8 EVPFP6654 752 822 66 54 2 7⁄8 EVPFP6660 800 879 66 60 2 7⁄8

EVPLFP - SEGMENTED LIGHT PANEL - PREMIUM

• Segmented Premium Light Panel incorporates fabric modules within a solid steel frame.

• Segmented Premium panels incorporate 12” H acoustic modules aboove 24”base module , plus 6” H open base.

• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• Fabric covered modules are tackable and acoustical.






Segmented Premium Light Panel - EVPLFP5418 341 362 54 18 2 7⁄8 Premium - 54” High EVPLFP5424 362 389 54 24 2 7⁄8 EVPLFP5430 399 431 54 30 2 7⁄8 EVPLFP5436 471 507 54 36 2 7⁄8 EVPLFP5442 531 574 54 42 2 7⁄8 EVPLFP5448 567 615 54 48 2 7⁄8 EVPLFP5454 603 657 54 54 2 7⁄8 EVPLFP5460 636 698 54 60 2 7⁄8

Segmented Premium Light Panel - EVPLFP6618 429 454 66 18 2 7⁄8 Premium - 66” High EVPLFP6624 446 478 66 24 2 7⁄8 EVPLFP6630 485 525 66 30 2 7⁄8 EVPLFP6636 514 563 66 36 2 7⁄8 EVPLFP6642 611 668 66 42 2 7⁄8 EVPLFP6648 671 732 66 48 2 7⁄8 EVPLFP6654 715 781 66 54 2 7⁄8 EVPLFP6660 759 835 66 60 21/4

PANELS SEGMENTED


EVPBFA - SEGMENTED BELTLINE POWERED PANEL

• Segmented Beltline Powered Panel incorporates fabric modules with a power beltline raceway, within a solid steel frame.

• A Chimney Panel is required to run electric and data from the base to belt.• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts

on both sides.• Beltline connectors must be used in conjunction with beltline panels.• Fabric covered modules are tackable and acoustical.






Segmented Beltline Powered Panel - 54” High EVPBFA5424 418 442 54 24 2 7⁄8 24” Fabric /6” Power /6” Fabric /12” Fabric EVPBFA5430 490 519 54 30 2 7⁄8 EVPBFA5436 564 600 54 36 2 7⁄8 EVPBFA5442 633 673 54 42 2 7⁄8 EVPBFA5448 693 738 54 48 2 7⁄8 EVPBFA5454 759 810 54 54 2 7⁄8 EVPBFA5460 827 883 54 60 2 7⁄8

Segmented Beltline Powered Panel - 66” High EVPBFA6624 500 533 66 24 2 7⁄8 24” Fabric /6” Power /6” Fabric /24” Fabric EVPBFA6630 586 624 66 30 2 7⁄8 EVPBFA6636 665 710 66 36 2 7⁄8 EVPBFA6642 748 800 66 42 2 7⁄8 EVPBFA6648 826 884 66 48 2 7⁄8 EVPBFA6654 907 972 66 54 2 7⁄8 EVPBFA6660 987 1057 66 60 2 7⁄8

EVPBLFA - SEGMENTED BELTLINE POWERED LIGHT PANEL

• Segmented Beltline Powered Light Panel incorporates fabric modules with a power beltline raceway, within a solid steel frame.

• There is no base raceway in Light Panels to accommodate electrical.• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts

on both sides.• Beltline Light Panel Connectors must be used in conjunction with Beltline Light

Panels.• Fabric covered modules are tackable and acoustical.






Segmented Beltline Powered EVPBLFA5424 384 408 54 24 2 7⁄8 Light Panel - 54” High EVPBLFA5430 450 478 54 30 2 7⁄8 24” Fabric /6” Power /6” Fabric /12” Fabric EVPBLFA5436 520 556 54 36 2 7⁄8 EVPBLFA5442 583 624 54 42 2 7⁄8 EVPBLFA5448 636 682 54 48 2 7⁄8 EVPBLFA5454 699 749 54 54 2 7⁄8 EVPBLFA5460 763 817 54 60 2 7⁄8

Segmented Beltline Powered EVPBLFA6624 461 493 66 24 2 7⁄8 Light Panel - 66” High EVPBLFA6630 538 577 66 30 2 7⁄8 24” Fabric /6” Power /6” Fabric /24 Fabric EVPBLFA6636 611 658 66 36 2 7⁄8 EVPBLFA6642 689 740 66 42 2 7⁄8 EVPBLFA6648 759 817 66 48 2 7⁄8 EVPBLFA6654 835 899 66 54 2 7⁄8 EVPBLFA6660 908 979 66 60 2 7⁄8

PANELS SEGMENTED


EVPBCFA - SEGMENTED BELTLINE POWERED CHIMNEY PANEL

• Segmented Chimney Beltline Powered Panel incorporates fabric modules with a power beltline raceway, within a solid steel frame.


on both sides.• Beltline Connectors must be used in conjunction with beltline panels.• Fabric covered modules are tackable and acoustical.






Segmented Beltline Powered EVPBCFA5436 624 658 54 36 2 7⁄8 Chimney Panel - 54” High EVPBCFA5442 693 732 54 42 2 7⁄8 24” Fabric Chimney /6” Power / 6” Fabric /12” Fabric

Segmented Beltline Powered EVPBCFA6636 723 770 66 36 2 7⁄8

Chimney Panel - 66” High EVPBCFA6642 806 858 66 42 2 7⁄8 24” Fabric Chimney /6” Power / 6” Fabric /24” Fabric







PANELS SEGMENTED


EVPBFFA - SEGMENTED BELTLINE NON-POWERED PANEL

• Double Beltline Non-Powered Panel incorporates all fabric modules within a solid steel frame.

• Electrical cannot pass through panel at the beltline level.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Segmented Beltline Non-Powered Panel - EVPBFFA5424 403 426 54 24 2 7⁄8 54” High EVPBFFA5430 441 475 54 30 2 7⁄8 24” Fabric /6” Fabric /6” Fabric /12” Fabric EVPBFFA5436 520 560 54 36 2 7⁄8 EVPBFFA5442 586 631 54 42 2 7⁄8 EVPBFFA5448 628 678 54 48 2 7⁄8 EVPBFFA5454 664 720 54 54 2 7⁄8 EVPBFFA5460 696 758 54 60 2 7⁄8

Segmented Beltline Non-Powered Panel - EVPBFFA6624 437 472 66 24 2 7⁄8 66” High EVPBFFA6630 513 556 66 30 2 7⁄8 24” Fabric /6” Fabric /6” Fabric /24” Fabric EVPBFFA6636 593 642 66 36 2 7⁄8 EVPBFFA6642 666 723 66 42 2 7⁄8 EVPBFFA6648 729 793 66 48 2 7⁄8 EVPBFFA6654 801 871 66 54 2 7⁄8 EVPBFFA6660 872 952 66 60 2 7⁄8

EVPBLFFA - SEGMENTED BELTLINE NON-POWERED LIGHT PANEL

• Double Beltline Non-Powered Panel incorporates all fabric modules within a solid steel frame.

• Electrical cannot pass through panel at the beltline level.• There is no base raceway in Light Panels to accommodate electrical• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.



increments.• See Extension Module (pages 82-90) for part numbers.


Segmented Beltline Non-Powered EVPBLFFA5424 332 361 54 24 2 7⁄8 Light Panel - 54” High EVPBLFFA5430 392 425 54 30 2 7⁄8 24” Fabric /6” Fabric /6” Fabric /12” Fabric EVPBLFFA5436 445 485 54 36 2 7⁄8 EVPBLFFA5442 498 544 54 42 2 7⁄8 EVPBLFFA5448 553 603 54 48 2 7⁄8 EVPBLFFA5454 630 686 54 54 2 7⁄8 EVPBLFFA5460 661 723 54 60 2 7⁄8

Segmented Beltline Non-Powered EVPBLFFA6624 414 449 66 24 2 7⁄8 Light Panel - 66” High EVPBLFFA6630 459 500 66 30 2 7⁄8 24” Fabric /6” Fabric /6” Fabric /24” Fabric EVPBLFFA6636 538 588 66 36 2 7⁄8 EVPBLFFA6642 606 664 66 42 2 7⁄8 EVPBLFFA6648 651 715 66 48 2 7⁄8 EVPBLFFA6654 707 778 66 54 2 7⁄8 EVPBLFFA6660 766 844 66 60 2 7⁄8

PANELS SEGMENTED


EVPMGTU - MONOLITHIC 12”H GLAZED PANEL - TEMPERED GLASS

• Monolithic 12”H Glazed Panel incorporates a lower fabric module with a 12”H top position glazed module, into a solid steel frame.

• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.


increments. See Extension Module (pages 82-90) for part numbers.• Standard in clear (CLR) or smoked glass (SMK) as an option. Please note the

smoked glass (SMK) has 51% light transmittance. • Frosted glass (FRST) 20% upcharge.


Monolithic 12”H Glazed Panel - EVPMGTU4818 392 414 48 18 2 7⁄8 Tempered Glass - 48” High EVPMGTU4824 458 488 48 24 2 7⁄8 EVPMGTU4830 532 567 48 30 2 7⁄8 EVPMGTU4836 608 651 48 36 2 7⁄8 EVPMGTU4842 675 721 48 42 2 7⁄8 EVPMGTU4848 734 788 48 48 2 7⁄8 EVPMGTU4854 815 870 48 54 2 7⁄8 EVPMGTU4860 894 960 48 60 2 7⁄8



PANELS PARTLY GLAZED


EVPLMGTU - MONOLITHIC 12”H GLAZED LIGHT PANEL - TEMPERED GLASS

• Monolithic 12”H Glazed Light Panel incorporates a lower fabric module with a 12”H top position glazed module, into a solid steel frame.

• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.






Monolithic 12”H Glazed Light Panel - EVPLMGTU4818 383 405 48 18 2 7⁄8 Tempered Glass - 48” High EVPLMGTU4824 449 477 48 24 2 7⁄8 EVPLMGTU4830 521 557 48 30 2 7⁄8 EVPLMGTU4836 598 637 48 36 2 7⁄8 EVPLMGTU4842 662 708 48 42 2 7⁄8 EVPLMGTU4848 718 774 48 48 2 7⁄8 EVPLMGTU4854 798 852 48 54 2 7⁄8 EVPLMGTU4860 877 942 48 60 2 7⁄8





EVPFGTU - FABRIC 12”H GLAZED PANEL - TEMPERED GLASS

• Segmented 12”H Glazed Panel incorporates a lower fabric module with a 12”H top position glazed module, into a solid steel frame.

• Panels incorporate 12”H acoustic modules above 30”H base section with a 12”H glazed module at the top.


at no upcharge.






Fabric 12” Glazed Panel - Tempered Glass EVPFGTU6618 483 505 66 18 2 7⁄8 66” High EVPFGTU6624 564 593 66 24 2 7⁄8 EVPFGTU6630 644 677 66 30 2 7⁄8 EVPFGTU6636 721 763 66 36 2 7⁄8 EVPFGTU6642 814 858 66 42 2 7⁄8 EVPFGTU6648 883 934 66 48 2 7⁄8 EVPFGTU6654 987 1043 66 54 2 7⁄8 EVPFGTU6660 1088 1150 66 60 2 7⁄8

EVPLFGTU - FABRIC 12”H GLAZED LIGHT PANEL

• Segmented 12”H Glazed Light Panel incorporates a lower fabric module with a 12”H top position glazed module, into a solid steel frame.

• Panels incorporate 12”H acoustic modules above 30”H base section with a 12”H glazed module at the top.

• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.



increments.• See Extension Module (pages 82-90) for part numbers.• Standard in clear (CLR) or smoked glass (SMK) as an option. Please note the



Fabric 12”H Glazed Light Panel - 66” High EVPLFGTU6618 473 494 66 18 2 7⁄8 EVPLFGTU6624 554 582 66 24 2 7⁄8 EVPLFGTU6630 631 664 66 30 2 7⁄8 EVPLFGTU6636 708 747 66 36 2 7⁄8 EVPLFGTU6642 797 841 66 42 2 7⁄8 EVPLFGTU6648 865 915 66 48 2 7⁄8 EVPLFGTU6654 967 1022 66 54 2 7⁄8 EVPLFGTU6660 1067 1126 66 60 2 7⁄8



EVPFPGTU - SEGMENTED 12”H GLAZED PANEL - PREMIUM - TEMPERED GLASS

• Segmented 12”H Glazed Premium Panel incorporates a lower fabric module with a 12”H top position glazed module, into a solid steel frame.

• Premium panels incorporate 12”H acoustic modules above 30”H base section with a 12”H glazed module at the top.


at no upcharge.






Segmented 12”H Glazed Premium Panel - EVPFPGTU5418 445 460 54 18 2 7⁄8 Tempered Glass - 54” High EVPFPGTU5424 522 543 54 24 2 7⁄8 EVPFPGTU5430 590 617 54 30 2 7⁄8 EVPFPGTU5436 664 695 54 36 2 7⁄8 EVPFPGTU5442 745 780 54 42 2 7⁄8 EVPFPGTU5448 809 847 54 48 2 7⁄8 EVPFPGTU5454 907 950 54 54 2 7⁄8 EVPFPGTU5460 1003 1051 54 60 2 7⁄8

Segmented 12”H Glazed Premium Panel - EVPFPGTU6618 545 565 66 18 2 7⁄8 Tempered Glass - 66” High EVPFPGTU6624 639 669 66 24 2 7⁄8 EVPFPGTU6630 728 759 66 30 2 7⁄8 EVPFPGTU6636 818 858 66 36 2 7⁄8 EVPFPGTU6642 923 969 66 42 2 7⁄8 EVPFPGTU6648 999 1050 66 48 2 7⁄8 EVPFPGTU6654 1117 1174 66 54 2 7⁄8 EVPFPGTU6660 1241 1304 66 60 2 7⁄8

EVPLFPGTU - SEGMENTED 12”H GLAZED PREMIUM LIGHT PANEL – TEMPERED GLASS

• Segmented 12”H Glazed Premium Light Panel incorporates a lower fabric module with a 12”H top position glazed module, into a solid steel frame.

• Premium panels incorporate 12”H acoustic modules above 30”H base section with a 12”H glazed module at the top.


at no upcharge.






Segmented 12”H Glazed Premium Panel - EVPLFPGTU5418 436 451 54 18 2 7⁄8 Premium - Tempered Glass - 54” High EVPLFPGTU5424 512 533 54 24 2 7⁄8 EVPLFPGTU5430 579 604 54 30 2 7⁄8 EVPLFPGTU5436 651 679 54 36 2 7⁄8 EVPLFPGTU5442 731 766 54 42 2 7⁄8 EVPLFPGTU5448 793 831 54 48 2 7⁄8 EVPLFPGTU5454 889 931 54 54 2 7⁄8 EVPLFPGTU5460 982 1030 54 60 2 7⁄8

Segmented 12”H Glazed Premium Panel - EVPLFPGTU6618 535 555 66 18 2 7⁄8 Premium - Tempered Glass - 66” High EVPLFPGTU6624 627 656 66 24 2 7⁄8 EVPLFPGTU6630 712 744 66 30 2 7⁄8 EVPLFPGTU6636 802 841 66 36 2 7⁄8 EVPLFPGTU6642 905 950 66 42 2 7⁄8 EVPLFPGTU6648 978 1029 66 48 2 7⁄8 EVPLFPGTU6654 1094 1150 66 54 2 7⁄8 EVPLFPGTU6660 1217 1279 66 60 2 7⁄8



EVPFGT - PARTLY GLAZED PANEL - TEMPERED GLASS

• Partly Glazed Panel incorporates a lower fabric module with a 12”H or 24”H top position glazed module, into a solid steel frame.



• An aluminum low profile top cap is included.

• Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H or 24”H increments. See Extension Module (pages 82-90) for part numbers.

• Standard in clear (CLR) or smoked glass (SMK) as an option. Please note the smoked glass (SMK) has 51% light transmittance.

• Frosted glass (FRST) 20% upcharge.


Partly Glazed Panel - Tempered Glass - EVPFGT4218 342 354 42 18 2 7⁄8 42” High EVPFGT4224 404 418 42 24 2 7⁄8 EVPFGT4230 457 474 42 30 2 7⁄8 EVPFGT4236 510 531 42 36 2 7⁄8 EVPFGT4242 568 592 42 42 2 7⁄8 EVPFGT4248 622 646 42 48 2 7⁄8 EVPFGT4254 695 721 42 54 2 7⁄8 EVPFGT4260 767 798 42 60 2 7⁄8





EVPLFGT - PARTLY GLAZED LIGHT PANEL - TEMPERED GLASS

• Partly Glazed Light Panel incorporates a lower fabric module with a 12”H or 24”H top position glazed module, into a solid steel frame.



at highest grade.





Partly Glazed Light Panel - EVPLFGT4218 334 347 42 18 2 7⁄8 Tempered Glass - 42” High EVPLFGT4224 396 410 42 24 2 7⁄8 EVPLFGT4230 448 466 42 30 2 7⁄8 EVPLFGT4236 498 520 42 36 2 7⁄8 EVPLFGT4242 558 581 42 42 2 7⁄8 EVPLFGT4248 607 633 42 48 2 7⁄8 EVPLFGT4254 679 708 42 54 2 7⁄8 EVPLFGT4260 751 781 42 60 2 7⁄8





EVPFGTX - PARTLY GLAZED PANEL - 36”H TEMPERED GLASS

• Partly Glazed Panel incorporates a lower fabric module with 36”H top position glazed module, into a solid steel frame.








Fabric 36” Glazed Panel - EVPFGTX6618 555 564 66 18 2 7⁄8 Tempered Glass - 66” High EVPFGTX6624 613 629 66 24 2 7⁄8 EVPFGTX6630 710 729 66 30 2 7⁄8 EVPFGTX6636 808 828 66 36 2 7⁄8 EVPFGTX6642 904 927 66 42 2 7⁄8 EVPFGTX6648 990 1015 66 48 2 7⁄8 EVPFGTX6654 1088 1117 66 54 2 7⁄8 EVPFGTX6660 1187 1219 66 60 2 7⁄8

EVPLFGTX - PARTLY GLAZED LIGHT PANEL - 36”H TEMPERED GLASS

• Partly Glazed Light Panel incorporates a lower fabric module with 36”H top position glazed module, into a solid steel frame.



at highest grade.





Partly Glazed Light Panel - EVPLFGTX6618 537 547 66 18 2 7⁄8 36”H Tempered Glass - 66” High EVPLFGTX6624 594 609 66 24 2 7⁄8 EVPLFGTX6630 690 706 66 30 2 7⁄8 EVPLFGTX6636 782 804 66 36 2 7⁄8 EVPLFGTX6642 877 899 66 42 2 7⁄8 EVPLFGTX6648 960 986 66 48 2 7⁄8 EVPLFGTX6654 1055 1082 66 54 2 7⁄8 EVPLFGTX6660 1151 1184 66 60 2 7⁄8



EVPBFGT - PARTLY GLAZED BELTLINE POWERED PANEL

• Partly Glazed Beltline Powered Panel incorporates fabric modules with a power beltline raceway and a 12”H or 24”H glazed module, within a solid steel frame.

• A Chimney Panel is required to run electric and data from the base to belt.• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts

on both sides.• Beltline Connectors must be used in conjunction with beltline panels.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.






Partly Glazed Beltline Powered Panel - 54” High EVPBFGT5424 561 579 54 24 2 7⁄8 24” Fabric /6” Power Belt/ 6” Fabric /12” Glass EVPBFGT5430 657 677 54 30 2 7⁄8 EVPBFGT5436 747 773 54 36 2 7⁄8 EVPBFGT5442 842 870 54 42 2 7⁄8 EVPBFGT5448 932 965 54 48 2 7⁄8 EVPBFGT5454 1023 1059 54 54 2 7⁄8 EVPBFGT5460 1116 1154 54 60 2 7⁄8

Partly Glazed Beltline Powered Panel - 66” High EVPBFGT6624 636 655 66 24 2 7⁄8 24” Fabric /6” Power Belt/ 6” Fabric /24” Glass EVPBFGT6630 742 764 66 30 2 7⁄8 EVPBFGT6636 844 869 66 36 2 7⁄8 EVPBFGT6642 949 977 66 42 2 7⁄8 EVPBFGT6648 1047 1080 66 48 2 7⁄8 EVPBFGT6654 1151 1176 66 54 2 7⁄8 EVPBFGT6660 1253 1292 66 60 2 7⁄8

EVPBLFGT - PARTLY GLAZED BELTLINE POWER LIGHT PANEL

• Partly Glazed Beltline Powered Light Panel incorporates fabric modules with a power beltline raceway and a 12”H or 24”H glazed module, within a solid steel frame.

• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts on both sides.

• There is no base raceway in Light Panels to accommodate electrical.• Light Beltline Panel Connectors must be used in conjunction with Light Beltline

Panels.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.



24”H increments. See Extension Module (pages 82-90) for part numbers.• Standard in clear (CLR) or smoked glass (SMK) as an option. Please note the



Partly Glazed Beltline Powered EVPBLFGT5424 533 551 54 24 2 7⁄8 Light Panel - 54” High EVPBLFGT5430 625 645 54 30 2 7⁄8 24” Fabric /6” Power Belt/ 6” Fabric /12” Glass EVPBLFGT5436 709 735 54 36 2 7⁄8 EVPBLFGT5442 800 828 54 42 2 7⁄8 EVPBLFGT5448 885 917 54 48 2 7⁄8 EVPBLFGT5454 973 1009 54 54 2 7⁄8 EVPBLFGT5460 1059 1100 54 60 2 7⁄8

Partly Glazed Beltline Powered EVPBLFGT6624 604 623 66 24 2 7⁄8 Light Panel - 66” High EVPBLFGT6630 705 727 66 30 2 7⁄8 24” Fabric /6” Power Belt/ 6” Fabric /24” Glass EVPBLFGT6636 802 827 66 36 2 7⁄8 EVPBLFGT6642 900 930 66 42 2 7⁄8 EVPBLFGT6648 997 1029 66 48 2 7⁄8 EVPBLFGT6654 1094 1129 66 54 2 7⁄8 EVPBLFGT6660 1190 1230 66 60 2 7⁄8



EVPBCFGT - PARTLY GLAZED BELTLINE POWERED CHIMNEY PANEL - TEMPERED GLASS

• Partly Glazed Beltline Powered Chimney Panel incorporates fabric modules with a power beltline raceway and a 12”H or 24”H glazed module, within a solid steel frame.


on both sides.• Beltline Connectors must be used in conjunction with beltline panels.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.






Partly Glazed Beltline Powered EVPBCFGT5436 805 831 54 36 2 7⁄8 Chimney Panel - Tempered Glass - 54” High EVPBCFGT5442 900 930 54 42 2 7⁄8 24” Fabric Chimney /6” Power Belt / 6” Fabric /12” Glass

Partly Glazed Beltline Powered EVPBCFGT6636 914 939 66 36 2 7⁄8

Chimney Panel - Tempered Glass - 66” High EVPBCFGT6642 1007 1036 66 42 2 7⁄8 24” Fabric Chimney /6” Power Belt / 6” Fabric /24” Glass









EVPFPGT - PARTLY GLAZED PREMIUM PANEL - TEMPERED GLASS

• Partly Glazed Premium Panel incorporates 12”H glazed modules above 30”H fabric base section.








Partly Glazed Premium Panel - EVPFPGT5418 457 470 54 18 2 7⁄8 Tempered Glass - 54” High EVPFPGT5424 545 559 54 24 2 7⁄8 EVPFPGT5430 610 629 54 30 2 7⁄8 EVPFPGT5436 679 701 54 36 2 7⁄8 EVPFPGT5442 757 780 54 42 2 7⁄8 EVPFPGT5448 834 860 54 48 2 7⁄8 EVPFPGT5454 932 961 54 54 2 7⁄8 EVPFPGT5460 1028 1061 54 60 2 7⁄8

Partly Glazed Premium Panel - EVPFPGT6618 570 582 66 18 2 7⁄8 Tempered Glass - 66” High EVPFPGT6624 686 704 66 24 2 7⁄8 EVPFPGT6630 770 786 66 30 2 7⁄8 EVPFPGT6636 848 869 66 36 2 7⁄8 EVPFPGT6642 946 970 66 42 2 7⁄8 EVPFPGT6648 1044 1072 66 48 2 7⁄8 EVPFPGT6654 1180 1211 66 54 2 7⁄8 EVPFPGT6660 1315 1348 66 60 2 7⁄8

EVPLFPGT - PARTLY GLAZED PREMIUM LIGHT PANEL – TEMPERED GLASS

• Partly Glazed Premium Panel incorporates 12”H glazed modules above 30”H fabric base section.



at highest grade.



smoked glass (SMK) has 51% light transmittance. .• Frosted glass (FRST) 20% upcharge.


Partly Glazed Premium Light Panel - EVPLFPGT5418 442 455 54 18 2 7⁄8 Tempered Glass - 54” High EVPLFPGT5424 529 542 54 24 2 7⁄8 EVPLFPGT5430 592 609 54 30 2 7⁄8 EVPLFPGT5436 661 679 54 36 2 7⁄8 EVPLFPGT5442 735 757 54 42 2 7⁄8 EVPLFPGT5448 809 834 54 48 2 7⁄8 EVPLFPGT5454 904 933 54 54 2 7⁄8 EVPLFPGT5460 998 1030 54 60 2 7⁄8

Partly Glazed Premium Light Panel - EVPLFPGT6618 555 564 66 18 2 7⁄8 Tempered Glass - 66” High EVPLFPGT6624 666 682 66 24 2 7⁄8 EVPLFPGT6630 745 764 66 30 2 7⁄8 EVPLFPGT6636 822 844 66 36 2 7⁄8 EVPLFPGT6642 918 940 66 42 2 7⁄8 EVPLFPGT6648 1012 1039 66 48 2 7⁄8 EVPLFPGT6654 1145 1174 66 54 2 7⁄8 EVPLFPGT6660 1276 1307 66 60 2 7⁄8



EVPXGT - FULLY GLAZED MONOLITHIC PANEL - TEMPERED GLASS

• Fully Glazed Monolithic Panels are incorporated into a solid steel frame.• An aluminum low profile top cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H or 24”H





Fully Glazed Monolithic Panel - EVPXGT4218 367 42 18 2 7⁄8 Tempered Glass - 42” High EVPXGT4224 404 42 24 2 7⁄8 EVPXGT4230 470 42 30 2 7⁄8 EVPXGT4236 528 42 36 2 7⁄8 EVPXGT4242 588 42 42 2 7⁄8




PANELS FULLY GLAZED


EVPLXGT - FULLY GLAZED MONOLITHIC LIGHT PANEL - TEMPERED GLASS

• Fully Glazed Monolithic Light Panels are incorporated into a solid steel frame.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• An aluminum low profile top cap is included.





Fully Glazed Monolithic Light Panel - EVPLXGT4218 348 42 18 2 7⁄8 Tempered Glass - 42” High EVPLXGT4224 384 42 24 2 7⁄8 EVPLXGT4230 446 42 30 2 7⁄8 EVPLXGT4236 500 42 36 2 7⁄8 EVPLXGT4242 559 42 42 2 7⁄8

Fully Glazed Monolithic Light Panel - EVPLXGT4818 308 48 18 2 7⁄8 Tempered Glass - 48” High EVPLXGT4824 397 48 24 2 7⁄8 EVPLXGT4830 439 48 30 2 7⁄8 EVPLXGT4836 543 48 36 2 7⁄8 EVPLXGT4842 569 48 42 2 7⁄8

Fully Glazed Monolithic Light Panel - EVPLXGT5418 387 54 18 2 7⁄8

Tempered Glass - 54 EVPLXGT5424 454 54 24 2 7⁄8 EVPLXGT5430 524 54 30 2 7⁄8 EVPLXGT5436 592 54 36 2 7⁄8 EVPLXGT5442 657 54 42 2 7⁄8

Fully Glazed Monolithic Light Panel - EVPLXGT6618 453 66 18 2 7⁄8

Tempered Glass - 66” High EVPLXGT6624 523 66 24 2 7⁄8 EVPLXGT6630 605 66 30 2 7⁄8 EVPLXGT6636 679 66 36 2 7⁄8 EVPLXGT6642 757 66 42 2 7⁄8

EVPGT - FULLY GLAZED SEGMENTED PANEL - TEMPERED GLASS

• Fully Glazed Segmented Panel incorporates (2) 24”H Glazed modules into a solid steel frame.






Fully Glazed Segmented Panel - EVPGT5418 520 54 18 2 7⁄8 Tempered Glass - 54” High EVPGT5424 637 54 24 2 7⁄8 EVPGT5430 705 54 30 2 7⁄8 EVPGT5436 770 54 36 2 7⁄8 EVPGT5442 852 54 42 2 7⁄8 EVPGT5448 951 54 48 2 7⁄8 EVPGT5454 1047 54 54 2 7⁄8 EVPGT5460 1144 54 60 2 7⁄8

PANELS FULLY GLAZED


EVPLGT - FULLY GLAZED SEGMENTED LIGHT PANEL - TEMPERED GLASS

• Fully Glazed Segmented Light Panel incorporates (2) 24”H Glazed modules into a solid steel frame.

• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• An aluminum low profile top cap is included.





Fully Glazed Segmented Light Panel EVPLGT5418 494 54 18 2 7⁄8 Tempered Glass - 54” High EVPLGT5424 606 54 24 2 7⁄8 EVPLGT5430 670 54 30 2 7⁄8 EVPLGT5436 731 54 36 2 7⁄8 EVPLGT5442 812 54 42 2 7⁄8 EVPLGT5448 903 54 48 2 7⁄8 EVPLGT5454 995 54 54 2 7⁄8 EVPLGT5460 1085 54 60 2 7⁄8

EVPGPT - FULLY GLAZED PREMIUM PANEL - TEMPERED GLASS

• Fully Glazed Premium Panel incorporates 12”H Glazed Modules into a solid steel frame.






Fully Glazed Premium Panel - EVPGPT4218 512 42 18 2 7⁄8 Tempered Glass - 42” High EVPGPT4224 627 42 24 2 7⁄8 EVPGPT4230 695 42 30 2 7⁄8 EVPGPT4236 757 42 36 2 7⁄8 EVPGPT4242 841 42 42 2 7⁄8 EVPGPT4248 934 42 48 2 7⁄8 EVPGPT4254 1029 42 54 2 7⁄8 EVPGPT4260 1122 42 60 2 7⁄8



PANELS FULLY GLAZED


EVPLGPT - FULLY GLAZED PREMIUM LIGHT PANEL - TEMPERED GLASS

• Fully Glazed Premium Light Panel incorporates 12”H Glazed Modules into a solid steel frame.

• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• An aluminum low profile top cap is included.





Fully Glazed Premium Light Panel - EVPLGPT4218 496 42 18 2 7⁄8 Tempered Glass - 42” High EVPLGPT4224 607 42 24 2 7⁄8 EVPLGPT4230 673 42 30 2 7⁄8 EVPLGPT4236 735 42 36 2 7⁄8 EVPLGPT4242 815 42 42 2 7⁄8 EVPLGPT4248 906 42 48 2 7⁄8 EVPLGPT4254 999 42 54 2 7⁄8 EVPLGPT4260 1088 42 60 2 7⁄8



PANELS FULLY GLAZED


EVPFSG - PASS-THRU SLIDING DOOR GLAZED PANEL - TEMPERED GLASS

• Pass-Thru Sliding Door Glazed Panel incorporates fabric modules on upper and lower positions, with Middle 12”H Pass-Thru Sliding Door module, into a solid steel frame.

• Tracks for Sliding glass door available in Tungsten only.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.





Pass-Thru Sliding Door Glazed Panel - EVPFSG5424 522 543 54 24 2 7/8 Tempered Glass - 54” High EVPFSG5430 590 617 54 30 2 7/8 EVPFSG5436 664 695 54 36 2 7/8 EVPFSG5442 745 780 54 42 2 7/8 EVPFSG5448 809 847 54 48 2 7/8 EVPFSG5454 907 950 54 54 2 7/8 EVPFSG5460 1003 1051 54 60 2 7/8

Pass-Thru Sliding Door Glazed Panel - EVPFSG6624 564 593 66 24 2 7/8 Tempered Glass - 66” High EVPFSG6630 644 677 66 30 2 7/8 EVPFSG6636 721 763 66 36 2 7/8 EVPFSG6642 814 858 66 42 2 7/8 EVPFSG6648 883 934 66 48 2 7/8 EVPFSG6654 987 1043 66 54 2 7/8 EVPFSG6660 1111 1150 66 60 2 7/8

Pass-Thru Sliding Door Glazed Panel - EVPFPSG6624 564 593 66 24 2 7/8 Tempered Glass - 66” High EVPFPSG6630 644 677 66 30 2 7/8 EVPFPSG6636 721 763 66 36 2 7/8 EVPFPSG6642 814 858 66 42 2 7/8 EVPFPSG6648 883 934 66 48 2 7/8 EVPFPSG6654 987 1043 66 54 2 7/8 EVPFPSG6660 1111 1150 66 60 2 7/8

PANELS PASS - THRU


EVPFSGX - FABRIC GLAZED PASS-THRU SLIDING DOOR PANEL - TEMPERED GLASS

• Pass-Thru Sliding Door Glazed Panel incorporates fabric modules with 12”H or 24”H Pass-Thru Sliding Door module, into a solid steel frame.

• Tracks for Sliding glass door available in Tungsten only.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.





Fabric Glazed Pass-Thru Sliding Door Panel - EVPFSGX4224 404 418 42 24 2 7/8 Tempered Glass - 42” High EVPFSGX4230 457 474 42 30 2 7/8 EVPFSGX4236 510 531 42 36 2 7/8 EVPFSGX4242 568 592 42 42 2 7/8 EVPFSGX4248 622 646 42 48 2 7/8 EVPFSGX4254 695 721 42 54 2 7/8 EVPFSGX4260 767 798 42 60 2 7/8



PANELS PASS - THRU


EVPF1S - SLATWALL PANEL - SINGLE SIDED

• Slatwall Panel incorporates fabric modules with a single 12”H or 24”H top position slatwall module, into a solid steel frame.

• 66”H panel can be configured with either a 24”H slatwall module at the top or a 12”H slatwall at the middle Position (EVPF1S66xxM)

• Opposite side is fabric covered.• Slatwall is made of aluminum.• Accessories can be used on slatwall modules. Please see accessory section for

additional details.






Slatwall Panel - Single Sided - 42” High EVPF1S4218 382 396 42 18 2 7⁄8 EVPF1S4224 455 474 42 24 2 7⁄8 EVPF1S4230 534 556 42 30 2 7⁄8 EVPF1S4236 610 635 42 36 2 7⁄8 EVPF1S4242 695 721 42 42 2 7⁄8 EVPF1S4248 754 786 42 48 2 7⁄8 EVPF1S4254 839 872 42 54 2 7⁄8 EVPF1S4260 918 958 42 60 2 7⁄8



Slat Wall Panel - Single Sided - EVPF1S6618M 556 580 66 18 2 7⁄8 Middle Module - 66” High EVPF1S6624M 670 701 66 24 2 7⁄8 EVPF1S6630M 781 819 66 30 2 7⁄8 EVPF1S6636M 900 945 66 36 2 7⁄8 EVPF1S6642M 1025 1077 66 42 2 7⁄8 EVPF1S6648M 1116 1173 66 48 2 7⁄8 EVPF1S6654M 1241 1306 66 54 2 7⁄8 EVPF1S6660M 1365 1436 66 60 2 7⁄8

PANELS SLATWALL


EVPLF1S - SLATWALL LIGHT PANEL - SINGLE SIDED

• Slatwall Light Panel incorporates fabric modules with a single 12”H or 24”H top position slatwall module, into a solid steel frame.

• 66”H panel can be configured with either a 24”H slatwall module at the top or a 12”H slatwall at the middle Position (EVPLF1S66xxM)

• Opposite side is fabric covered• Slatwall is made of aluminum.• Accessories can be used on slatwall modules. Please see accessory section for

additional details.• There is no base raceway in Light Panels to accommodate electrical.

• Light Panel Connectors must be used in conjunction with Light Panels.• Opposite sides of each panel may have a different fabric within the same grade


at highest grade.• An aluminum low profile top cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H or 24”H



Slatwall Light Panel - Single Sided- 42” High EVPLF1S4218 373 388 42 18 2 7⁄8 EVPLF1S4224 446 466 42 24 2 7⁄8 EVPLF1S4230 523 544 42 30 2 7⁄8 EVPLF1S4236 600 624 42 36 2 7⁄8 EVPLF1S4242 679 708 42 42 2 7⁄8 EVPLF1S4248 740 772 42 48 2 7⁄8 EVPLF1S4254 821 856 42 54 2 7⁄8 EVPLF1S4260 900 939 42 60 2 7⁄8

Slatwall Light Panel - Single Sided - 54” High EVPLF1S5418 440 455 54 18 2 7⁄8 EVPLF1S5424 531 551 54 24 2 7⁄8 EVPLF1S5430 622 646 54 30 2 7⁄8 EVPLF1S5436 712 741 54 36 2 7⁄8 EVPLF1S5442 806 841 54 42 2 7⁄8 EVPLF1S5448 881 920 54 48 2 7⁄8 EVPLF1S5454 979 1022 54 54 2 7⁄8 EVPLF1S5460 1077 1119 54 60 2 7⁄8

Slatwall Light Panel - Single Sided - 66” High EVPLF1S6618 561 579 66 18 2 7⁄8 EVPLF1S6624 673 702 66 24 2 7⁄8 EVPLF1S6630 787 821 66 30 2 7⁄8 EVPLF1S6636 907 943 66 36 2 7⁄8 EVPLF1S6642 1033 1077 66 42 2 7⁄8 EVPLF1S6648 1123 1169 66 48 2 7⁄8 EVPLF1S6654 1250 1299 66 54 2 7⁄8 EVPLF1S6660 1379 1432 66 60 2 7⁄8

Slatwall Light Panel - Single Sided - EVPLF1S6618M 544 567 66 18 2 7⁄8 Middle Module - 66” High EVPLF1S6624M 657 686 66 24 2 7⁄8 EVPLF1S6630M 767 803 66 30 2 7⁄8 EVPLF1S6636M 883 927 66 36 2 7⁄8 EVPLF1S6642M 1004 1055 66 42 2 7⁄8 EVPLF1S6648M 1093 1149 66 48 2 7⁄8 EVPLF1S6654M 1217 1280 66 54 2 7⁄8 EVPLF1S6660M 1338 1407 66 60 2 7⁄8

PANELS SLATWALL


EVPF2S - SLATWALL PANEL - DOUBLE SIDED

• Slatwall Panel incorporates fabric modules with a single 12”H or 24”H top position slatwall module, into a solid steel frame.

• 66”H panel can be configured with either a 24”H slatwall module at the top or a 12”H slatwall at the middle Position (EVPF2S66xxM)

• Slatwall module has slatwall on both sides.• Slatwall is made of aluminum.• Accessories can be used on slatwall modules. Please see accessory section for

additional details.






Slatwall Panel - Double Sided - 42” High EVPF2S4218 427 438 42 18 2 7⁄8 EVPF2S4224 517 532 42 24 2 7⁄8 EVPF2S4230 608 627 42 30 2 7⁄8 EVPF2S4236 709 731 42 36 2 7⁄8 EVPF2S4242 809 832 42 42 2 7⁄8 EVPF2S4248 906 932 42 48 2 7⁄8 EVPF2S4254 998 1025 42 54 2 7⁄8 EVPF2S4260 1084 1118 42 60 2 7⁄8

Slatwall Panel - Double Sided - 54” High EVPF2S5418 499 511 54 18 2 7⁄8 EVPF2S5424 611 628 54 24 2 7⁄8 EVPF2S5430 723 741 54 30 2 7⁄8 EVPF2S5436 843 864 54 36 2 7⁄8 EVPF2S5442 965 988 54 42 2 7⁄8 EVPF2S5448 1083 1109 54 48 2 7⁄8 EVPF2S5454 1192 1220 54 54 2 7⁄8 EVPF2S5460 1299 1332 54 60 2 7⁄8

Slatwall Panel - Double Sided- 66” High EVPF2S6618 648 664 66 18 2 7⁄8 EVPF2S6624 797 819 66 24 2 7⁄8 EVPF2S6630 944 970 66 30 2 7⁄8 EVPF2S6636 1095 1124 66 36 2 7⁄8 EVPF2S6642 1254 1289 66 42 2 7⁄8 EVPF2S6648 1406 1445 66 48 2 7⁄8 EVPF2S6654 1553 1594 66 54 2 7⁄8 EVPF2S6660 1695 1744 66 60 2 7⁄8

Slatwall Panel - Double Sided - EVPF2S6618M 630 652 66 18 2 7⁄8 Middle Module - 66” High EVPF2S6624M 775 804 66 24 2 7⁄8 EVPF2S6630M 918 952 66 30 2 7⁄8 EVPF2S6636M 1066 1104 66 36 2 7⁄8 EVPF2S6642M 1219 1263 66 42 2 7⁄8 EVPF2S6648M 1365 1418 66 48 2 7⁄8 EVPF2S6654M 1510 1565 66 54 2 7⁄8 EVPF2S6660M 1650 1712 66 60 2 7⁄8

PANELS SLATWALL


EVPLF2S - SLATWALL LIGHT PANEL - DOUBLE SIDED

• Slatwall Light Panel incorporates fabric modules with a single 12”H or 24”H top position slatwall module, into a solid steel frame.

• 66”H panel can be configured with either a 24”H slatwall module at the top or a 12”H slatwall at the middle Position (EVPLF2S66xxM)

• Slatwall module has slatwall on both sides.• Slatwall is made of aluminum.• Accessories can be used on slatwall modules. Please see accessory section for

additional details.• There is no base raceway in Light Panels to accommodate electrical.

• Light Panel Connectors must be used in conjunction with Light Panels.• Opposite sides of each panel may have a different fabric within the same grade



increments.• See Extension Module (pages 82-90) for part numbers.


Slatwall Light Panel - Double Sided - 42” High EVPLF2S4218 419 430 42 18 2 7⁄8 EVPLF2S4224 506 521 42 24 2 7⁄8 EVPLF2S4230 598 613 42 30 2 7⁄8 EVPLF2S4236 696 716 42 36 2 7⁄8 EVPLF2S4242 793 816 42 42 2 7⁄8 EVPLF2S4248 888 913 42 48 2 7⁄8 EVPLF2S4254 977 1004 42 54 2 7⁄8 EVPLF2S4260 1062 1095 42 60 2 7⁄8



Slatwall Light Panel - Double Sided - 66” High EVPLF2S6618M 611 639 66 18 2 7⁄8 EVPLF2S6624M 759 787 66 24 2 7⁄8 EVPLF2S6630M 900 933 66 30 2 7⁄8 EVPLF2S6636M 1044 1081 66 36 2 7⁄8 EVPLF2S6642M 1194 1238 66 42 2 7⁄8 EVPLF2S6648M 1338 1388 66 48 2 7⁄8 EVPLF2S6654M 1479 1534 66 54 2 7⁄8 EVPLF2S6660M 1618 1679 66 60 2 7⁄8

PANELS SLATWALL


EVPBSFA - FRAMELESS SLATWALL BELTLINE POWERED PANEL - DOUBLE SIDED ONLY

• Frameless Slatwall Beltline Powered Panel incorporates fabric modules with a single 6”H slatwall module above a power beltline raceway, into a solid steel frame.

• Slatwall module has slatwall on both sides only, and is not available Single Sided.• Slatwall is made of aluminum.• Slatwall is not encompassed within a frame.• A Chimney Panel is required to run electric and data from the base to belt• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts

on both sides.• Beltline Connectors must be used in conjunction with beltline panels.

• Accessories can be used on slatwall modules. Please see accessory section for additional details.






Frameless Slatwall Beltline Powered Panel - EVPBSFA4224 377 393 42 24 2 7⁄8 Double Sided Only - 42” High EVPBSFA4230 440 456 42 30 2 7⁄8 EVPBSFA4236 513 532 42 36 2 7⁄8 EVPBSFA4242 577 600 42 42 2 7⁄8 EVPBSFA4248 636 682 42 48 2 7⁄8 EVPBSFA4254 700 729 42 54 2 7⁄8 EVPBSFA4260 761 793 42 60 2 7⁄8



PANELS SLATWALL


EVPBLSFA - FRAMELESS SLATWALL BELTLINE POWERED LIGHT PANEL - DOUBLE SIDED ONLY

• Frameless Slatwall Beltline Powered Light Panel incorporates fabric modules with a single 6”H slatwall module above a power beltline raceway, into a solid steel frame.

• Slatwall module has slatwall on both sides only, and is not available Single Sided.• Slatwall is made of aluminum.• Slatwall is not encompassed within a frame.• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts

on both sides.• There is no base raceway in Light Panels to accommodate electrical.• Light Beltline Panel Connectors must be used in conjunction with Light Beltline

Panels.

• Accessories can be used on slatwall modules. Please see accessory section for additional details.






Frameless Slatwall Beltline Powered EVPBLSFA4224 361 374 42 24 2 7⁄8 Light Panel - Double Sided Only- 42” High EVPBLSFA4230 419 435 42 30 2 7⁄8 EVPBLSFA4236 490 509 42 36 2 7⁄8 EVPBLSFA4242 548 571 42 42 2 7⁄8 EVPBLSFA4248 607 633 42 48 2 7⁄8 EVPBLSFA4254 669 697 42 54 2 7⁄8 EVPBLSFA4260 727 757 42 60 2 7⁄8

Frameless Slatwall Beltline Powered EVPBLSFA5424 444 466 54 24 2 7⁄8 Light Panel - Double Sided Only- 54” High EVPBLSFA5430 485 541 54 30 2 7⁄8 EVPBLSFA5436 579 641 54 36 2 7⁄8 EVPBLSFA5442 684 717 54 42 2 7⁄8 EVPBLSFA5448 753 793 54 48 2 7⁄8 EVPBLSFA5454 818 861 54 54 2 7⁄8 EVPBLSFA5460 892 939 54 60 2 7⁄8

Frameless Slatwall Beltline Powered EVPBLSFA6624 494 520 66 24 2 7⁄8 Light Panel - Double Sided Only - 66” High EVPBLSFA6630 570 605 66 30 2 7⁄8 EVPBLSFA6636 663 701 66 36 2 7⁄8 EVPBLSFA6642 741 787 66 42 2 7⁄8 EVPBLSFA6648 819 870 66 48 2 7⁄8 EVPBLSFA6654 899 953 66 54 2 7⁄8 EVPBLSFA6660 977 1039 66 60 2 7⁄8

PANELS SLATWALL


EVPBCSFA - FRAMELESS SLATWALL BELTLINE POWERED CHIMNEY PANEL - DOUBLE SIDED ONLY

• Frameless Slatwall Beltline Powered Chimney Panel incorporates fabric modules with a single 6”H slatwall module above a power beltline raceway, into a solid steel frame.

• Slatwall module has slatwall on both sides only, and is not available Single Sided.• Slatwall is made of aluminum.• Slatwall is not encompassed within a frame.• A Chimney Panel is required to run electric and data from the base to belt.• Separate electric harness required to go from base to belt (see EVE8CPCP).• 6”H power beltline raceway, to accommodate electrical, is metal with knockouts

on both sides.

• Beltline Connectors must be used in conjunction with beltline panels.• Accessories can be used on slatwall modules. Please see accessory section for

additional details.• Opposite sides of each panel may have a different fabric within the same grade





Frameless Slatwall Beltline Powered - EVPBCSFA4236 568 588 42 36 2 7⁄8 Chimney Panel - Double Sided Only - 42” High EVPBCSFA4242 632 656 42 42 2 7⁄8

Frameless Slatwall Beltline Powered - EVPBCSFA5436 712 741 54 36 2 7⁄8 Chimney Panel - Double Sided Only- 54” High EVPBCSFA5442 791 823 54 42 2 7⁄8

Frameless Slatwall Beltline Powered - EVPBCSFA6636 771 809 66 36 2 7⁄8 Chimney Panel - Double Sided Only - 66” High EVPBCSFA6642 857 903 66 42 2 7⁄8







PANELS SLATWALL


EVPF1W - WRITE BOARD PANEL - SINGLE SIDED

• Write Board Panel incorporates fabric modules with a single 24”H top position write board module, into a solid steel frame.

• Use erasable writeboard markers only.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Write Board Panel - Single Sided - 54” High EVPF1W5418 372 384 54 18 2 7⁄8 EVPF1W5424 461 483 54 24 2 7⁄8 EVPF1W5430 557 582 54 30 2 7⁄8 EVPF1W5436 617 646 54 36 2 7⁄8 EVPF1W5442 695 730 54 42 2 7⁄8 EVPF1W5448 782 821 54 48 2 7⁄8 EVPF1W5454 870 899 54 54 2 7⁄8 EVPF1W5460 958 1005 54 60 2 7⁄8

Write Board Panel - Single Sided - 66” High EVPF1W6618 473 491 66 18 2 7⁄8 EVPF1W6624 582 609 66 24 2 7⁄8 EVPF1W6630 692 723 66 30 2 7⁄8 EVPF1W6636 770 809 66 36 2 7⁄8 EVPF1W6642 871 917 66 42 2 7⁄8 EVPF1W6648 973 1024 66 48 2 7⁄8 EVPF1W6654 1081 1141 66 54 2 7⁄8 EVPF1W6660 1193 1257 66 60 2 7⁄8

EVPLF1W - WRITE BOARD LIGHT PANEL - SINGLE SIDED


• Use erasable writeboard markers only.• Fabric covered modules are tackable and acoustical.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.


• Light panel connectors must be used for Light Panels.• There is no base raceway in Light Panels to accommodate electrical.• An aluminum low profile top cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H or 24”H



Write Board Light Panel - Single Sided - 54” High EVPLF1W5418 361 372 54 18 2 7⁄8 EVPLF1W5424 448 469 54 18 2 7⁄8 EVPLF1W5430 540 564 54 18 2 7⁄8 EVPLF1W5436 599 627 54 18 2 7⁄8 EVPLF1W5442 673 707 54 18 2 7⁄8 EVPLF1W5448 759 797 54 18 2 7⁄8 EVPLF1W5454 845 871 54 18 2 7⁄8 EVPLF1W5460 930 975 54 18 2 7⁄8

Write Board Light Panel - Single Sided - 66” High EVPLF1W6618 459 475 66 18 2 7⁄8 EVPLF1W6624 564 591 66 24 2 7⁄8 EVPLF1W6630 670 701 66 30 2 7⁄8 EVPLF1W6636 745 784 66 36 2 7⁄8 EVPLF1W6642 846 889 66 42 2 7⁄8 EVPLF1W6648 943 993 66 48 2 7⁄8 EVPLF1W6654 1048 1106 66 54 2 7⁄8 EVPLF1W6660 1156 1219 66 60 2 7⁄8

PANELS WRITE BOARD


EVPF2W - WRITE BOARD PANEL - DOUBLE SIDED


• Use erasable writeboard markers only.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Write Board Panel - Double Sided - 54” High EVPF2W5418 402 412 54 18 2 7⁄8 EVPF2W5424 504 517 54 24 2 7⁄8 EVPF2W5430 628 644 54 30 2 7⁄8 EVPF2W5436 679 701 54 36 2 7⁄8 EVPF2W5442 771 794 54 42 2 7⁄8 EVPF2W5448 902 927 54 48 2 7⁄8 EVPF2W5454 1002 1030 54 54 2 7⁄8 EVPF2W5460 1104 1138 54 60 2 7⁄8

Write Board Panel - Double Sided - 66” High EVPF2W6618 500 517 66 18 2 7⁄8 EVPF2W6624 624 644 66 24 2 7⁄8 EVPF2W6630 763 788 66 30 2 7⁄8 EVPF2W6636 835 865 66 36 2 7⁄8 EVPF2W6642 946 980 66 42 2 7⁄8 EVPF2W6648 1088 1125 66 48 2 7⁄8 EVPF2W6654 1214 1257 66 54 2 7⁄8 EVPF2W6660 1338 1386 66 60 2 7⁄8

EVPLF2W - WRITE BOARD LIGHT PANEL - DOUBLE SIDED

• Write Board Light Panel incorporates fabric modules with a single 24”H top position write board module, into a solid steel frame.

• Use erasable writeboard markers only.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Write Board Light Panel - Double Sided - 54” High EVPLF2W5418 391 399 54 18 2 7⁄8 EVPLF2W5424 489 500 54 18 2 7⁄8 EVPLF2W5430 608 626 54 18 2 7⁄8 EVPLF2W5436 661 679 54 18 2 7⁄8 EVPLF2W5442 747 771 54 18 2 7⁄8 EVPLF2W5448 874 899 54 18 2 7⁄8 EVPLF2W5454 972 1000 54 18 2 7⁄8 EVPLF2W5460 1072 1103 54 18 2 7⁄8

Write Board Light Panel - Double Sided - 66” High EVPLF2W6618 486 500 66 18 2 7⁄8 EVPLF2W6624 604 626 66 24 2 7⁄8 EVPLF2W6630 739 766 66 30 2 7⁄8 EVPLF2W6636 810 840 66 36 2 7⁄8 EVPLF2W6642 918 952 66 42 2 7⁄8 EVPLF2W6648 1055 1091 66 48 2 7⁄8 EVPLF2W6654 1177 1219 66 54 2 7⁄8 EVPLF2W6660 1344 1344 66 60 2 7⁄8

PANELS WRITE BOARD


EVPH1S - LAMINATE PANEL - SINGLE SIDED

• Laminate Panel incorporates single sided laminate modules, into a solid steel frame.

• Opposite side is fabric covered.• Laminate faces on all modules provide durable, washable surfaces on Single Sided

of the panel.• Available in high pressure laminate only.

• If wood grain is selected, grain runs horizontally.• If different grades of fabric are used on one panel, the entire panel must be priced




Laminate Panel - Single Sided - 30” High EVPH1S3018 306 312 30 18 2 7⁄8 EVPH1S3024 367 374 30 24 2 7⁄8 EVPH1S3030 426 435 30 30 2 7⁄8 EVPH1S3036 486 497 30 36 2 7⁄8 EVPH1S3042 553 562 30 42 2 7⁄8 EVPH1S3048 601 611 30 48 2 7⁄8 EVPH1S3054 663 677 30 54 2 7⁄8 EVPH1S3060 728 742 30 60 2 7⁄8




PANELS LAMINATE


EVPLH1S - LAMINATE LIGHT PANEL - SINGLE SIDED

• Laminate Panel incorporates single sided laminate modules, into a solid steel frame.

• Opposite side is fabric covered.• Laminate faces on all modules provide durable, washable surfaces on Single Sided

of the panel.• Available in high pressure laminate only.• If wood grain is selected, grain runs horizontally.

• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.• If different grades of fabric are used on one panel, the entire panel must be priced




Laminate Light Panel - Single Sided - 30” High EVPLH1S3018 298 303 30 18 2 7⁄8 EVPLH1S3024 356 364 30 24 2 7⁄8 EVPLH1S3030 414 421 30 30 2 7⁄8 EVPLH1S3036 472 483 30 36 2 7⁄8 EVPLH1S3042 535 545 30 42 2 7⁄8 EVPLH1S3048 583 593 30 48 2 7⁄8 EVPLH1S3054 642 658 30 54 2 7⁄8 EVPLH1S3060 705 719 30 60 2 7⁄8




PANELS LAMINATE


EVPH2S - LAMINATE PANEL - DOUBLE SIDED

• Laminate Panel incorporates double sided laminate modules, into a solid steel frame.

• Laminate faces on all modules provide durable, washable surfaces on Single Sided of the panel.

• Available in high pressure laminate only.• If wood grain is selected, grain runs horizontally.





Laminate Panel - Double Sided - 30” High EVPH2S3018 418 30 18 2 7⁄8 EVPH2S3024 418 30 24 2 7⁄8 EVPH2S3030 494 30 30 2 7⁄8 EVPH2S3036 564 30 36 2 7⁄8 EVPH2S3042 642 30 42 2 7⁄8 EVPH2S3048 717 30 48 2 7⁄8 EVPH2S3054 795 30 54 2 7⁄8 EVPH2S3060 858 30 60 2 7⁄8




PANELS LAMINATE


EVPLH2S - LAMINATE LIGHT PANEL - DOUBLE SIDED

• Laminate Panel incorporates double sided laminate modules, into a solid steel frame.

• Laminate faces on all modules provide durable, washable surfaces on Single Sided of the panel.

• Available in high pressure laminate only• If wood grain is selected, grain runs horizontally.• There is no base raceway in Light Panels to accommodate electrical.

• Light Panel Connectors must be used in conjunction with Light Panels.• If different grades of fabric are used on one panel, the entire panel must be priced




Laminate Light Panel - Double Sided - 30” High EVPLH2S3018 405 30 18 2 7⁄8 EVPLH2S3024 405 30 24 2 7⁄8 EVPLH2S3030 478 30 30 2 7⁄8 EVPLH2S3036 547 30 36 2 7⁄8 EVPLH2S3042 625 30 42 2 7⁄8 EVPLH2S3048 697 30 48 2 7⁄8 EVPLH2S3054 772 30 54 2 7⁄8 EVPLH2S3060 832 30 60 2 7⁄8




PANELS LAMINATE


EVPFAF - AIRFLOW PANEL

• Airflow Panel incorporates bottom 24”H airflow module with individual fabric modules, within a steel frame.

• The 24”H Metal airflow module is positioned in the base section to provide air circulation.






Airflow Panel - 30” High EVPFAF3024 351 30 24 2 7⁄8 EVPFAF3030 417 30 30 2 7⁄8 EVPFAF3036 462 30 36 2 7⁄8 EVPFAF3042 513 30 42 2 7⁄8 EVPFAF3048 579 30 48 2 7⁄8 EVPFAF3054 665 30 54 2 7⁄8 EVPFAF3060 750 30 60 2 7⁄8

Airflow Panel - 42” High EVPFAF4224 448 454 42 24 2 7⁄8 EVPFAF4230 529 538 42 30 2 7⁄8 EVPFAF4236 590 601 42 36 2 7⁄8 EVPFAF4242 655 666 42 42 2 7⁄8 EVPFAF4248 740 752 42 48 2 7⁄8 EVPFAF4254 843 857 42 54 2 7⁄8 EVPFAF4260 856 871 42 60 2 7⁄8



PANELS AIR FLOW


EVPLFAF - AIRFLOW LIGHT PANEL

• Airflow Light Panel incorporates bottom 24”H airflow module with individual fabric modules, within a steel frame.


• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.




increments. See Extension Module listings for part numbers


Airflow Light Panel - 30” High EVPLFAF3024 341 30 18 2 7⁄8 EVPLFAF3030 404 30 30 2 7⁄8 EVPLFAF3036 449 30 36 2 7⁄8 EVPLFAF3042 497 30 42 2 7⁄8 EVPLFAF3048 561 30 48 2 7⁄8 EVPLFAF3054 645 30 54 2 7⁄8 EVPLFAF3060 729 30 60 2 7⁄8

Airflow Light Panel - 42” High EVPLFAF4224 435 440 42 18 2 7⁄8 EVPLFAF4230 513 523 42 30 2 7⁄8 EVPLFAF4236 571 583 42 36 2 7⁄8 EVPLFAF4242 634 646 42 42 2 7⁄8 EVPLFAF4248 717 731 42 48 2 7⁄8 EVPLFAF4254 817 831 42 54 2 7⁄8 EVPLFAF4260 829 846 42 60 2 7⁄8



PANELS AIR FLOW


EVPFPAF - AIRFLOW PREMIUM PANEL

• Airflow Premium Panel incorporates bottom 24”H airflow module with individual fabric modules, within a steel frame.


• Premium panels incorporate 12”H acoustic modules above 30”H base section.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Airflow Premium Panel - 54” High EVPFPAF5424 558 570 54 24 2 7⁄8 EVPFPAF5430 639 657 54 30 2 7⁄8 EVPFPAF5436 715 735 54 36 2 7⁄8 EVPFPAF5442 794 817 54 42 2 7⁄8 EVPFPAF5448 900 926 54 48 2 7⁄8 EVPFPAF5454 1018 1047 54 54 2 7⁄8 EVPFPAF5460 1139 1169 54 60 2 7⁄8

Airflow Premium Panel - 66” High EVPFPAF6624 640 662 66 24 2 7⁄8 EVPFPAF6630 751 777 66 30 2 7⁄8 EVPFPAF6636 842 871 66 36 2 7⁄8 EVPFPAF6642 934 968 66 42 2 7⁄8 EVPFPAF6648 1061 1101 66 48 2 7⁄8 EVPFPAF6654 1195 1239 66 54 2 7⁄8 EVPFPAF6660 1332 1379 66 60 2 7⁄8

EVPLFPAF -AIRFLOW PREMIUM LIGHT PANEL

• Airflow Premium Light Panel incorporates bottom 24”H airflow module with individual 12”H fabric modules, within a steel frame.


• Premium panels incorporate 12”H acoustic modules above 30”H base section.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.






Airflow Premium Light Panel - 54” High EVPLFPAF5424 541 555 54 18 2 7⁄8 EVPLFPAF5430 622 636 54 30 2 7⁄8 EVPLFPAF5436 695 712 54 36 2 7⁄8 EVPLFPAF5442 771 793 54 42 2 7⁄8 EVPLFPAF5448 872 897 54 48 2 7⁄8 EVPLFPAF5454 988 1013 54 54 2 7⁄8 EVPLFPAF5460 1104 1133 54 60 2 7⁄8

Airflow Premium Light Panel - 66” High EVPLFPAF6624 623 641 66 18 2 7⁄8 EVPLFPAF6630 730 753 66 30 2 7⁄8 EVPLFPAF6636 816 846 66 36 2 7⁄8 EVPLFPAF6642 906 938 66 42 2 7⁄8 EVPLFPAF6648 1030 1068 66 48 2 7⁄8 EVPLFPAF6654 1160 1198 66 54 2 7⁄8 EVPLFPAF6660 1292 1337 66 60 2 7⁄8

PANELS AIR FLOW


EVPFPMAF - AIRFLOW MIDDLE PREMIUM PANEL

• Airflow Panel Middle Premium Panel incorporates a 12”H middle position airflow module with fabric modules, within a steel frame.

• Premium panels incorporate 12”H modules above 30”H base section.• 12”H airflow panel is located at the beltline.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Airflow Middle Premium Panel - 54” High EVPFPMAF5424 613 637 54 24 2 7⁄8 EVPFPMAF5430 727 755 54 30 2 7⁄8 EVPFPMAF5436 824 861 54 36 2 7⁄8 EVPFPMAF5442 927 967 54 42 2 7⁄8 EVPFPMAF5448 1036 1080 54 48 2 7⁄8 EVPFPMAF5454 1172 1221 54 54 2 7⁄8 EVPFPMAF5460 1307 1363 54 60 2 7⁄8

Airflow Middle Premium Panel - 66” High EVPFPMAF6624 697 723 66 24 2 7⁄8 EVPFPMAF6630 822 842 66 30 2 7⁄8 EVPFPMAF6636 935 973 66 36 2 7⁄8 EVPFPMAF6642 1047 1090 66 42 2 7⁄8 EVPFPMAF6648 1172 1220 66 48 2 7⁄8 EVPFPMAF6654 1321 1376 66 54 2 7⁄8 EVPFPMAF6660 1469 1529 66 60 2 7⁄8

EVPLFPMAF - AIRFLOW MIDDLE PREMIUM LIGHT PANEL

• Airflow Panel Middle Premium Light Panel incorporates a 12”H middle position airflow module with fabric modules, within a steel frame.

• Premium panels incorporate 12”H modules above 30”H base section.• 12”H airflow panel is located at the beltline.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.






Airflow Middle Premium Light Panel - 66” High EVPLFPMAF6624 562 588 66 18 2 7⁄8 EVPLFPMAF6630 664 689 66 30 2 7⁄8 EVPLFPMAF6636 755 794 66 36 2 7⁄8 EVPLFPMAF6642 850 891 66 42 2 7⁄8 EVPLFPMAF6648 1034 1082 66 48 2 7⁄8 EVPLFPMAF6654 1068 1119 66 54 2 7⁄8 EVPLFPMAF6660 1189 1248 66 60 2 7⁄8

PANELS AIR FLOW


EVPM1S - METAL SKIN PANEL - SINGLE SIDED

• Metal Skin Panel incorporates single sided metal skin modules, into a solid steel frame.

• Opposite side is fabric covered.• Metal faces on all modules provide durable, washable and magnetic surfaces on

Single Sided of the panel.





Metal Skin Panel - Single Sided EVPM1S3018 398 404 30 18 2 7⁄8 30” High EVPM1S3024 476 484 30 24 2 7⁄8 EVPM1S3030 554 561 30 30 2 7⁄8 EVPM1S3036 631 641 30 36 2 7⁄8 EVPM1S3042 716 729 30 42 2 7⁄8 EVPM1S3048 779 792 30 48 2 7⁄8 EVPM1S3054 862 875 30 54 2 7⁄8 EVPM1S3060 944 959 30 60 2 7⁄8




PANELS METAL


EVPLM1S - METAL SKIN LIGHT PANEL - SINGLE SIDED

• Metal Skin Light Panel incorporates single sided metal skin modules, into a solid steel frame.

• Opposite side is fabric covered.• Metal faces on all modules provide durable, washable and magnetic surfaces on

Single Sided of the panel.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.





Metal Skin Light Panel - Single Sided - 30” High EVPLM1S3018 387 393 30 18 2 7⁄8 EVPLM1S3024 462 470 30 24 2 7⁄8 EVPLM1S3030 536 544 30 30 2 7⁄8 EVPLM1S3036 611 624 30 36 2 7⁄8 EVPLM1S3042 696 706 30 42 2 7⁄8 EVPLM1S3048 755 769 30 48 2 7⁄8 EVPLM1S3054 837 849 30 54 2 7⁄8 EVPLM1S3060 916 931 30 60 2 7⁄8




PANELS METAL


EVPM2S - METAL SKIN PANEL - DOUBLE SIDED

• Metal Skin Panel incorporates double sided metal skin modules, into a solid steel frame.

• Metal faces on all modules provide durable, washable and magnetic surfaces on Single Sided of the panel.





Metal Skin Panel - Double Sided - 30” High EVPM2S3018 586 30 18 2 7⁄8 EVPM2S3024 586 30 24 2 7⁄8 EVPM2S3030 690 30 30 2 7⁄8 EVPM2S3036 791 30 36 2 7⁄8 EVPM2S3042 791 30 42 2 7⁄8 EVPM2S3048 897 30 48 2 7⁄8 EVPM2S3054 1003 30 54 2 7⁄8 EVPM2S3060 1199 30 60 2 7⁄8




PANELS METAL


EVPLM2S - METAL SKIN LIGHT PANEL - DOUBLE SIDED

• Metal Skin Light Panel incorporates double sided metal skin modules, into a solid steel frame.

• Metal faces on all modules provide durable, washable and magnetic surfaces on Single Sided of the panel.






Metal Skin Light Panel - Double Sided - 30” High EVPLM2S3018 567 30 18 2 7⁄8 EVPLM2S3024 567 30 24 2 7⁄8 EVPLM2S3030 669 30 30 2 7⁄8 EVPLM2S3036 767 30 36 2 7⁄8 EVPLM2S3042 767 30 42 2 7⁄8 EVPLM2S3048 870 30 48 2 7⁄8 EVPLM2S3054 973 30 54 2 7⁄8 EVPLM2S3060 1164 30 60 2 7⁄8




PANELS METAL


EVPFOL - OPEN BOTTOM PANEL

• Open Bottom Panel incorporates bottom 24”H open module with individual fabric modules, within a steel frame.

• The 24”H open bottom module in the base section is to provide air circulation and access to electrical or data.






Open Bottom Panel - 30” High EVPFOL3018 201 30 18 2 7⁄8 EVPFOL3024 229 30 24 2 7⁄8 EVPFOL3030 259 30 30 2 7⁄8 EVPFOL3036 285 30 36 2 7⁄8 EVPFOL3042 312 30 42 2 7⁄8 EVPFOL3048 338 30 48 2 7⁄8 EVPFOL3054 366 30 54 2 7⁄8 EVPFOL3060 392 30 60 2 7⁄8

Open Bottom Panel - 42” High EVPFOL4218 301 305 42 18 2 7⁄8 EVPFOL4224 347 354 42 24 2 7⁄8 EVPFOL4230 392 401 42 30 2 7⁄8 EVPFOL4236 439 451 42 36 2 7⁄8 EVPFOL4242 488 499 42 42 2 7⁄8 EVPFOL4248 525 537 42 48 2 7⁄8 EVPFOL4254 578 590 42 54 2 7⁄8 EVPFOL4260 627 641 42 60 2 7⁄8



PANELS OPEN


EVPLFOL - OPEN BOTTOM LIGHT PANEL

• Open Bottom Light Panel incorporates bottom 24”H open module with individual fabric modules, within a steel frame.








Open Bottom Light Panel - 30” High EVPLFOL3018 195 30 18 2 7⁄8 EVPLFOL3024 221 30 24 2 7⁄8 EVPLFOL3030 252 30 30 2 7⁄8 EVPLFOL3036 277 30 36 2 7⁄8 EVPLFOL3042 303 30 42 2 7⁄8 EVPLFOL3048 324 30 48 2 7⁄8 EVPLFOL3054 355 30 54 2 7⁄8 EVPLFOL3060 380 30 60 2 7⁄8

Open Bottom Light Panel - 42” High EVPLFOL4218 291 297 42 18 2 7⁄8 EVPLFOL4224 336 343 42 24 2 7⁄8 EVPLFOL4230 380 389 42 30 2 7⁄8 EVPLFOL4236 426 437 42 36 2 7⁄8 EVPLFOL4242 473 485 42 42 2 7⁄8 EVPLFOL4248 511 521 42 48 2 7⁄8 EVPLFOL4254 560 571 42 54 2 7⁄8 EVPLFOL4260 607 624 42 60 2 7⁄8

Open Bottom Light Panel - 54” High EVPLFOL5418 326 337 54 18 2 7⁄8 EVPLFOL5424 372 387 54 24 2 7⁄8 EVPLFOL5430 427 441 54 30 2 7⁄8 EVPLFOL5436 478 498 54 36 2 7⁄8 EVPLFOL5442 532 555 54 42 2 7⁄8 EVPLFOL5448 577 602 54 48 2 7⁄8 EVPLFOL5454 632 659 54 54 2 7⁄8 EVPLFOL5460 684 716 54 60 2 7⁄8

Open Bottom Premium Panel - 66” High EVPLFOL6618 425 440 60 18 2 7⁄8 EVPLFOL6624 489 510 60 24 2 7⁄8 EVPLFOL6630 558 582 60 30 2 7⁄8 EVPLFOL6636 627 655 60 36 2 7⁄8 EVPLFOL6642 704 738 60 42 2 7⁄8 EVPLFOL6648 753 792 60 48 2 7⁄8 EVPLFOL6654 832 872 60 54 2 7⁄8 EVPLFOL6660 909 955 60 60 2 7⁄8

PANELS OPEN


EVPFPOL - OPEN BOTTOM PREMIUM PANEL

• Open Bottom Premium Panel incorporates bottom 24”H open module with individual fabric modules, within a steel frame.


• Premium panels incorporate 12”H fabric modules above 30”H base section.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Open Bottom Premium Panel - 54” High EVPFPOL5418 402 412 54 18 2 7⁄8 EVPFPOL5424 461 476 54 24 2 7⁄8 EVPFPOL5430 527 543 54 30 2 7⁄8 EVPFPOL5436 592 611 54 36 2 7⁄8 EVPFPOL5442 666 689 54 42 2 7⁄8 EVPFPOL5448 715 741 54 48 2 7⁄8 EVPFPOL5454 786 816 54 54 2 7⁄8 EVPFPOL5460 863 892 54 60 2 7⁄8

Open Bottom Premium Panel - 66” High EVPFPOL6618 504 521 66 18 2 7⁄8 EVPFPOL6624 582 604 66 24 2 7⁄8 EVPFPOL6630 662 686 66 30 2 7⁄8 EVPFPOL6636 747 777 66 36 2 7⁄8 EVPFPOL6642 843 877 66 42 2 7⁄8 EVPFPOL6648 903 942 66 48 2 7⁄8 EVPFPOL6654 1001 1044 66 54 2 7⁄8 EVPFPOL6660 1098 1146 66 60 2 7⁄8

EVPLFPOL - OPEN BOTTOM PREMIUM LIGHT PANEL

• Open Bottom Premium Light Panel incorporates bottom 24”H open module with individual fabric modules, within a steel frame.


• Premium panels incorporate 12”H fabric modules above 30”H base section.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.






Open Bottom Premium Light Panel - 54” High EVPLFPOL5418 385 396 54 18 2 7⁄8 EVPLFPOL5424 442 458 54 24 2 7⁄8 EVPLFPOL5430 506 521 54 30 2 7⁄8 EVPLFPOL5436 568 588 54 36 2 7⁄8 EVPLFPOL5442 639 661 54 42 2 7⁄8 EVPLFPOL5448 686 711 54 48 2 7⁄8 EVPLFPOL5454 754 782 54 54 2 7⁄8 EVPLFPOL5460 828 857 54 60 2 7⁄8

Open Bottom Premium Light Panel - 66” High EVPLFPOL6618 484 499 60 18 2 7⁄8 EVPLFPOL6624 559 580 60 24 2 7⁄8 EVPLFPOL6630 634 661 60 30 2 7⁄8 EVPLFPOL6636 716 745 60 36 2 7⁄8 EVPLFPOL6642 809 842 60 42 2 7⁄8 EVPLFPOL6648 866 905 60 48 2 7⁄8 EVPLFPOL6654 960 1002 60 54 2 7⁄8 EVPLFPOL6660 1053 1101 60 60 2 7⁄8

PANELS OPEN


EVPFO - OPEN MIDDLE PANEL - 12”H OPENING

• Open Middle Panel incorporates a 12”H middle position open module with fabric modules, within a steel frame.

• Open Middle Panel Incorporates a 12”H opening above 30”H base module to provide pass-through convenience.






Open Middle Panel - 12”H Opening - 54” High EVPFO5418 407 425 54 18 2 7⁄8 EVPFO5424 474 496 54 24 2 7⁄8 EVPFO5430 546 571 54 30 2 7⁄8 EVPFO5436 622 651 54 36 2 7⁄8 EVPFO5442 700 734 54 42 2 7⁄8 EVPFO5448 754 794 54 48 2 7⁄8 EVPFO5454 837 879 54 54 2 7⁄8 EVPFO5460 916 965 54 60 2 7⁄8

Open Middle Panel - 12”H Opening - 66” High EVPFO6618 450 472 66 18 2 7⁄8 EVPFO6624 520 547 66 24 2 7⁄8 EVPFO6630 599 631 66 30 2 7⁄8 EVPFO6636 679 719 66 36 2 7⁄8 EVPFO6642 766 810 66 42 2 7⁄8 EVPFO6648 826 879 66 48 2 7⁄8 EVPFO6654 917 974 66 54 2 7⁄8 EVPFO6660 1002 1067 66 60 2 7⁄8

EVPLFO - OPEN MIDDLE LIGHT PANEL - 12”H OPENING

• Open Middle Light Panel incorporates a 12”H middle position open module with fabric modules, within a steel frame.

• Open Middle Light Panel Incorporates a 12”H opening above 30”H base module to provide pass-through convenience.







Open Middle Light Panel - 12”H Opening - EVPLFO5418 388 404 54 18 2 7⁄8 54” High EVPLFO5424 451 472 54 24 2 7⁄8 EVPLFO5430 520 544 54 30 2 7⁄8 EVPLFO5436 590 618 54 36 2 7⁄8 EVPLFO5442 665 698 54 42 2 7⁄8 EVPLFO5448 717 753 54 48 2 7⁄8 EVPLFO5454 794 835 54 54 2 7⁄8 EVPLFO5460 870 916 54 60 2 7⁄8

Open Middle Light Panel - 12”H Opening - EVPLFO6618 427 449 60 18 2 7⁄8 66” High EVPLFO6624 494 521 60 24 2 7⁄8 EVPLFO6630 567 600 60 30 2 7⁄8 EVPLFO6636 646 683 60 36 2 7⁄8 EVPLFO6642 728 770 60 42 2 7⁄8 EVPLFO6648 785 835 60 48 2 7⁄8 EVPLFO6654 871 925 60 54 2 7⁄8 EVPLFO6660 952 1012 60 60 2 7⁄8

PANELS OPEN


EVPFPO - OPEN MIDDLE PREMIUM PANEL - 12”H OPENING

• Open Middle Premium Panel incorporates a 12”H middle position open module with fabric modules, within a steel frame.

• Open Middle Premium Panel Incorporates a 12”H opening above 30”H base module to provide pass-through convenience.

• Premium panels incorporate 12”H modules above 30”H base section.• Opposite sides of each panel may have a different fabric within the same grade

at no upcharge.





Open Middle Premium Panel - EVPFPO6618 511 533 66 18 2 7⁄8 12”H Opening - 66” High EVPFPO6624 592 622 66 24 2 7⁄8 EVPFPO6630 680 715 66 30 2 7⁄8 EVPFPO6636 771 809 66 36 2 7⁄8 EVPFPO6642 877 922 66 42 2 7⁄8 EVPFPO6648 943 995 66 48 2 7⁄8 EVPFPO6654 1046 1103 66 54 2 7⁄8 EVPFPO6660 1151 1216 66 60 2 7⁄8

EVPLFPO - OPEN MIDDLE PREMIUM LIGHT PANEL - 12” OPENING

• Open Middle Premium Light Panel incorporates a 12”H middle position open module with fabric modules, within a steel frame.

• Open Middle Premium Light Panel Incorporates a 12”H opening above 30”H base module to provide pass-through convenience.

• Premium panels incorporate 12”H modules above 30”H base section.• There is no base raceway in Light Panels to accommodate electrical.• Light Panel Connectors must be used in conjunction with Light Panels.






Open Middle Premium Light Panel - EVPLFPO6618 485 506 66 18 2 7⁄8 12”H Opening - 66” High EVPLFPO6624 563 590 66 24 2 7⁄8 EVPLFPO6630 647 678 66 30 2 7⁄8 EVPLFPO6636 732 769 66 36 2 7⁄8 EVPLFPO6642 834 877 66 42 2 7⁄8 EVPLFPO6648 896 945 66 48 2 7⁄8 EVPLFPO6654 993 1047 66 54 2 7⁄8 EVPLFPO6660 1094 1154 66 60 2 7⁄8

PANELS OPEN


EVPFOX - OPEN MIDDLE PANEL - 24”H OPENING








Open Middle Panel - 24”H Opening - 54” High EVPFOX5418 340 351 54 18 2 7⁄8 EVPFOX5424 388 403 54 24 2 7⁄8 EVPFOX5430 445 460 54 30 2 7⁄8 EVPFOX5436 498 520 54 36 2 7⁄8 EVPFOX5442 554 577 54 42 2 7⁄8 EVPFOX5448 599 625 54 48 2 7⁄8 EVPFOX5454 657 684 54 54 2 7⁄8 EVPFOX5460 712 745 54 60 2 7⁄8

Open Middle Panel - 24”H Opening - 66” High EVPFOX6618 442 459 66 18 2 7⁄8 EVPFOX6624 509 531 66 24 2 7⁄8 EVPFOX6630 599 625 66 30 2 7⁄8 EVPFOX6636 652 680 66 36 2 7⁄8 EVPFOX6642 733 769 66 42 2 7⁄8 EVPFOX6648 785 823 66 48 2 7⁄8 EVPFOX6654 867 909 66 54 2 7⁄8 EVPFOX6660 946 995 66 60 2 7⁄8

EVPLFOX - OPEN MIDDLE LIGHT PANEL - 24”H OPENING









Open Middle Light Panel - EVPLFOX5418 324 333 54 18 2 7⁄8 24”H Opening - 54” High EVPLFOX5424 368 383 54 24 2 7⁄8 EVPLFOX5430 423 437 54 30 2 7⁄8 EVPLFOX5436 474 494 54 36 2 7⁄8 EVPLFOX5442 524 546 54 42 2 7⁄8 EVPLFOX5448 567 592 54 48 2 7⁄8 EVPLFOX5454 625 651 54 54 2 7⁄8 EVPLFOX5460 677 708 54 60 2 7⁄8

Open Middle Light Panel - EVPLFOX6618 420 436 66 18 2 7⁄8 24”H Opening - 66” High EVPLFOX6624 483 504 66 24 2 7⁄8 EVPLFOX6630 567 592 66 30 2 7⁄8 EVPLFOX6636 620 647 66 36 2 7⁄8 EVPLFOX6642 697 730 66 42 2 7⁄8 EVPLFOX6648 745 782 66 48 2 7⁄8 EVPLFOX6654 823 864 66 54 2 7⁄8 EVPLFOX6660 900 945 66 60 2 7⁄8

PANELS OPEN


EVPFANR - SEGMENTED NO RACEWAY PANEL

• Segmented No Raceway panel incorporates fabric modules within steel frame.• There is no base raceway in No Raceway Panels to accommodate electric.• No Raceway connectors to be used.• Fabric covered modules are tackable and acoustical.• Each side of fabric module may have different fabric within the same grade at no

charge.

• If different grades of fabric are used, the entire module must be price at highest grade.

• Aluminum low profile top and bottom cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H,

24”H increments. See module listing for part numbers See Extension Module (pages 82-90) for part numbers.


Segmented NR Panel - 30” High EVPFA3018NR 269 280 30 18 2 7⁄8 EVPFA3024NR 280 296 30 24 2 7⁄8 EVPFA3030NR 313 328 30 30 2 7⁄8 EVPFA3036NR 339 359 30 36 2 7⁄8 EVPFA3042NR 362 387 30 42 2 7⁄8 EVPFA3048NR 399 427 30 48 2 7⁄8 EVPFA3054NR 432 461 30 54 2 7⁄8 EVPFA3060NR 463 497 30 60 2 7⁄8




PANELS SEGMENTED - NO RACEWAY


EVPFAMNR - MONOLITHIC NO RACEWAY PANEL

• Monolithic No Raceway panel incorporates fabric modules within steel frame.• There is no base raceway in No Raceway Panels to accommodate electric.• No Raceway connectors to be used.• Fabric covered modules are tackable and acoustical.• Each side of fabric module may have different fabric within the same grade at no

charge.


• Aluminum low profile top and bottom cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H,

24”H increments. See module listing for part numbers See Extension Module (pages 82-90) for part numbers.


Monolithic NR Panel 42” High EVPFAM4218NR 278 302 42 18 2 7⁄8 EVPFAM4224NR 296 325 42 24 2 7⁄8 EVPFAM4230NR 340 376 42 30 2 7⁄8 EVPFAM4236NR 362 404 42 36 2 7⁄8 EVPFAM4242NR 401 452 42 42 2 7⁄8 EVPFAM4248NR 436 494 42 48 2 7⁄8 EVPFAM4254NR 479 541 42 54 2 7⁄8 EVPFAM4260NR 520 587 42 60 2 7⁄8

Monolithic NR Panel - 48” High EVPFAM4818NR 281 305 48 18 2 7⁄8 EVPFAM4824NR 309 341 48 24 2 7⁄8 EVPFAM4830NR 358 394 48 30 2 7⁄8 EVPFAM4836NR 390 432 48 36 2 7⁄8 EVPFAM4842NR 434 484 48 42 2 7⁄8 EVPFAM4848NR 472 527 48 48 2 7⁄8 EVPFAM4854NR 522 585 48 54 2 7⁄ EVPFAM4860NR 567 635 48 60 2 7⁄8

Monolithic NR Panel - 54” High EVPFAM5418NR 285 309 54 18 2 7⁄8 EVPFAM5424NR 313 343 54 24 2 7⁄8 EVPFAM5430NR 364 401 54 30 2 7⁄8 EVPFAM5436NR 404 449 54 36 2 7⁄8 EVPFAM5442NR 452 501 54 42 2 7⁄8 EVPFAM5448NR 492 546 54 48 2 7⁄8 EVPFAM5454NR 537 603 54 54 2 7⁄8 EVPFAM5460NR 590 659 54 60 2 7⁄8

Monolithic NR Panel - 66” High EVPFAM6618NR 351 376 66 18 2 7⁄8 EVPFAM6624NR 386 417 66 24 2 7⁄8 EVPFAM6630NR 434 473 66 30 2 7⁄8 EVPFAM6636NR 505 548 66 36 2 7⁄8 EVPFAM6642NR 567 617 66 42 2 7⁄8 EVPFAM6648NR 614 669 66 48 2 7⁄8 EVPFAM6654NR 684 744 66 54 2 7⁄8 EVPFAM6660NR 752 819 66 60 2 7⁄8

PANELS MONOLITHIC - NO RACEWAY


EVPH1SNR - LAMINATE NO RACEWAY - PANEL SINGLE SIDED

• Laminate No Raceway panel incorporates single sided laminate modules within steel frame.

• Opposite side is fabric covered.• Laminate faces on all modules provide durable, washable surfaces on One Side

of the panel.• Available in high pressure laminate only.• If wood grain is selected, grain runs horizontally.

• There is no base raceway in No Raceway Panels to accommodate electric.• No Raceway connectors to be used.• If different grades of fabric are used, the entire module must be priced at highest

grade.• An aluminum low profile top and bottom cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H, 24”H

increments. See module listing for part numbers.


Laminate NR Panel - Single Sided - 30” High EVPH1S3018NR 331 337 30 18 2 7⁄8 EVPH1S3024NR 397 405 30 24 2 7⁄8 EVPH1S3030NR 461 470 30 30 2 7⁄8 EVPH1S3036NR 525 537 30 36 2 7⁄8 EVPH1S3042NR 598 607 30 42 2 7⁄8 EVPH1S3048NR 650 661 30 48 2 7⁄8 EVPH1S3054NR 716 733 30 54 2 7⁄8 EVPH1S3060NR 787 803 30 60 2 7⁄8




PANELS LAMINATE - NO RACEWAY


EVPH2SNR - LAMINATE NO RACEWAY - PANEL DOUBLE SIDED

• Laminate No Raceway panel incorporates double sided laminate modules, within steel frame.

• Laminate faces on all modules provide durable, washable surfaces on both sides of the panel.

• Available in high pressure laminate only.• If wood grain is selected, grain runs horizontally.

• There is no base raceway in No Raceway Panels to accommodate electric.• No Raceway connectors to be used.• If different grades of fabric are used, the entire module must be priced at highest

grade.• An aluminum low profile top and bottom cap is included. • Stackability: Evolve panels can be increased in height in 6”H, 12”H, 18”H, 24”H

increments. See module listing for part numbers.


Laminate NR Panel - Double Sided - 30” High EVPH2S3018NR 452 30 18 2 7⁄8 EVPH2S3024NR 452 30 24 2 7⁄8 EVPH2S3030NR 534 30 30 2 7⁄8 EVPH2S3036NR 610 30 36 2 7⁄8 EVPH2S3042NR 695 30 42 2 7⁄8 EVPH2S3048NR 776 30 48 2 7⁄8 EVPH2S3054NR 860 30 54 2 7⁄8 EVPH2S3060NR 929 30 60 2 7⁄8




PANELS LAMINATE - NO RACEWAY


EVPXGTNR - FULLY GLAZED MONOLITHIC NO RACEWAY PANEL

• Fully Glazed Monolithic No Raceway panel are incorporated in solid steel frame.• There is no base raceway in No Raceway Panels to accomodate electric.• No Raceway connectors to be used.• Standard in clear (CLR) or smoked glass (SMK) as option.

• Frosted glass (FRST) 40% upcharge.• Size 90”x36”W is maximum size allowed.• Panel height to align with standard door height.• Aluminum low profile top and bottom cap is included.


Glazed Monolithic NR Panel 90” High EVPXGT9018NR 693 90 18 2 7⁄8 EVPXGT9024NR 791 90 24 2 7⁄8 EVPXGT9030NR 896 90 30 2 7⁄8 EVPXGT9036NR 969 90 36 2 7⁄8

PANELS FULLY GLAZED MONOLITHIC - NO RACEWAY


EVPICNR - INLINE CONNECTOR NO RACEWAY PANEL

• Connects two No Raceway Panels in a straight run.• Provides slotted support for worksurfaces and hang on components.

• Includes one slotted connector with leveling glide and connecting hardware.• Connectors are available without slots, as a special at no extra charge.

Contact Customer Support.


Inline Connector No Raceway Panel EVPIC30NR 55 30 2 To be used only with 90” H NR Glazed Panels EVPIC42NR 64 42 2 EVPIC48NR 67 48 2 EVPIC54NR 70 54 2 EVPIC66NR 77 66 2

EVPIC90NR - INLINE CONNECTOR NO RACEWAY PANEL

• Connects two 90” H No Raceway panel in straight run.• Includes one slotted connector with leveling glide and connecting hardware.• Connectors are without slots• To be used only with 90” H NR Glazed Panels.


Inline Connector No Raceway Panel EVPIC90NR 117 90 2

EVPVCNR - INLINE VARIABLE HEIGHT CONNECTOR NO RACEWAY PANEL

• Connects two No Raceway panels of differing height in straight run.• Connector must reference taller panel.• Can be used for any variation of pane height.• Variable height trim must be ordered separately (see EVPTVA).

• Provides slotted support for worksurfaces and hang on components.• Includes one slotted connector with leveling glide and connecting hardware.• Connectors are available without slots, as a special at no extra charge.

Contact customer support..


Inline Variable Height Connector EVPVC42NR 70 42 2 No Raceway Panel EVPVC48NR 71 48 2 EVPVC54NR 72 54 2 EVPVC66NR 78 66 2

PANELS INLINE CONNECTOR - NO RACEWAY


EVPERANR - END OF RUN POST KIT FOR NO RACEWAY PANEL

• Connects at end of No Raceway panel and can attach to a panel to fixed wall.• Adds 1” to width of panel run.• Provides slotted support for worksurfaces and hang on components.• Includes one slotted connector with leveling glide and connecting hardware and

glide and connecting hardware and trim kit.

• Can be attached to face of another panel to provide off modular connection.• Connectors are available without slots, as a special at no extra charge.

Contact customer support.


End End of Run Post Kit EVPERA30NR 67 30 2 No Raceway Panel EVPERA42NR 77 42 2 EVPERA48NR 81 48 2 EVPERA54NR 92 54 2 EVPERA66NR 102 66 2

EVPERA90NR - END OF RUN POST KIT FOR NO RACEWAY PANEL

• Connects two 90” H No Raceway panel and can attach to a panel to fixed wall.• Adds 1” to width of panel run.• Includes Non-Slotted connector with leveling glide and connecting hardware and

trim kit.

• Can be attached to face of another panel to provide off modular connection.• Connectors are without slots.• To be used only with 90” H NR Glazed Panels.


End End of Run Post Kit EVPERA90NR 147 66 2 To be used only with 90” H NR Glazed Panels

PANELS END OF RUN - NO RACEWAY


EVPCPA1NR - ONE WAY CORNER POST NO RACEWAY PANEL

• Connects at end of No Raceway panel run in place of EVPERA- End of run post kit.• Should not be used to attach panel to fixed wall.• Post and connecting hardware add 3.25” to power beam run.• Provides slotted support for worksurfaces and hang on components.

• Includes post, panel connectors and power beam connectors, post with trim all around, levelling glide, hardware and trim kit.

• Connectors are available without slots, as a special at no extra charge. Contact customer support.


One Way Corner Post EVPCPA130NR 89 30 2 7⁄8 No Raceway Panel EVPCPA142NR 102 42 2 7⁄8 EVPCPA148NR 120 48 2 7⁄8 EVPCPA154NR 137 54 2 7⁄8 EVPCPA166NR 169 66 2 7⁄8

EVPCPA190NR - ONE WAY CORNER POST NO RACEWAY PANEL

• Connects at end of 90” H No Raceway panel run in place of EVPERA - End of run post kit.

• Should not be used to attach panel to fixed wall.• Post and connecting hardware add 3.25” to power beam run.


• Connectors are without slots.• To be used only with 90” H NR Glazed Panels.


One Way Corner Post EVPCPA190NR 250 90 2 7⁄8 No Raceway Panel To be used only with 90” H NR Glazed Panels

PANELS CORNER POST - NO RACEWAY


EVPIPA2NR - INLINE TWO WAY CORNER POST NO RACEWAY PANEL

• Connects two No Raceway panel of equal height in straight run.• Post and connecting hardware add 3.25” to power beam run.• Provides slotted support for worksurfaces and hang on components.




Inline Two Way Corner Post EVPIPA230NR 124 30 2 7⁄8 No Raceway Panel EVPIPA242NR 155 42 2 7⁄8 EVPIPA248NR 170 48 2 7⁄8 EVPIPA254NR 186 54 2 7⁄8 EVPIPA266NR 222 66 2 7⁄8

EVPIPA290NR - INLINE TWO WAY CORNER POST NO RACEWAY PANEL

• Connects three No Raceway panel of equal height in a straight run.• Post and connecting hardware add 3.25” to power beam run.• Includes post, panel connectors and power beam connectors, post with trim all

around, levelling glide, hardware and trim kit.



Inline Two Way Corner Post EVPIPA290NR 334 90 2 7⁄8 No Raceway Panel To be used only with 90” H NR Glazed Panels



EVPCPA2PNR - TWO WAY CORNER POST NO RACEWAY PANEL-PANEL

• Connects No Raceway panel and Raceway Panel of equal height in 90 degree configuration.

• Post and connecting hardware add 3.25” to power beam run.• Provides slotted support for worksurfaces and hang on components.




Two Way Corner Post EVPCPA230PNR 126 30 2 7⁄8 No Raceway Panel EVPCPA242PNR 158 42 2 7⁄8 EVPCPA248PNR 169 48 2 7⁄8 EVPCPA254PNR 196 54 2 7⁄8 EVPCPA266PNR 232 66 2 7⁄8

EVPCPA290NR - TWO WAY CORNER POST NO RACEWAY PANEL

• Connects two 90” H No Raceway panels of equal height in “T” configuration.• Post and connecting hardware add 3.25” to power beam run.• Includes post, panel connectors and power beam connectors, post with trim all




Two Way Corner Post EVPCPA290NR 335 90 2 7⁄8 No Raceway Panel To be used only with 90” H NR Glazed Panels



EVPCPA3PNR - THREE WAY CORNER POST NO RACEWAY PANEL-PANEL-NO RACEWAY PANEL

• Connects two No Raceway panels and Raceway Panels of equal height in “T” configuration.





Three Way Corner Post EVPCPA330PNR 157 30 2 7⁄8 No Raceway Panel EVPCPA342PNR 211 42 2 7⁄8 EVPCPA348PNR 232 48 2 7⁄8 EVPCPA354PNR 255 54 2 7⁄8 EVPCPA366PNR 301 66 2 7⁄8

EVPCPA390NR - THREE WAY CORNER POST NO RACEWAY PANEL

• Connects two 90” H No Raceway panels of equal height in “T” configuration.• Post and connecting hardware add 3.25” to power beam run.• Includes post, panel connectors and power beam connectors, post with trim all




Three Way Corner Post EVPCPA390NR 424 90 2 7⁄8 No Raceway Panel To be used only with 90” H NR Glazed Panels



EVPCPA4PNR - FOUR WAY CORNER POST NO RACEWAY PANEL-PANEL-NO RACEWAY PANEL-PA

• Connects two No Raceway panels and two Raceway panels of equal height in “+” configuration.





Four Way Corner Post EVPCPA430PNR 193 30 2 7⁄8 No Raceway Panel EVPCPA442PNR 248 42 2 7⁄8 EVPCPA448PNR 274 48 2 7⁄8 EVPCPA454PNR 299 54 2 7⁄8 EVPCPA466PNR 351 66 2 7⁄8

EVPCPA490NR - FOUR WAY CORNER POST NO RACEWAY PANEL

• Connects four 90” H No Raceway panels of equal height in “+” configuration.• Post and connecting hardware add 3.25” to power beam run.• Includes post, panel connectors and power beam connectors, post with trim all




Four Way Corner Post EVPCPA490NR 486 90 2 7⁄8 No Raceway Panel To be used only with 90” H NR Glazed Panels



EVLEP - 1” LAMINATE END PANEL

• 1” Laminate End Panel attaches to an end of run connector. • Left Hand or Right Hand available.• Finished in thermally Fused Laminate.• Includes threaded metal inserts and support brackets to attach a worksurface on

one side.

• 1” Laminate end panel have panel leveling glides.• If wood grain is selected, grain runs vertically.

DESCRIPTION PRODUCT CODE LIST PRICE DIMENSIONS/INCHES LP H W D

1” Laminate End Panel - Right - 42” High EVLEPR4224 273 42 24 1 EVLEPR4230 341 42 30 1 EVLEPR4236 409 42 36 1 EVLEPR4242 477 42 42 1 EVLEPR4248 546 42 48 1

1” Laminate End Panel - Left - 42” High EVLEPL4224 273 42 24 1 EVLEPL4230 341 42 30 1 EVLEPL4236 409 42 36 1 EVLEPL4242 477 42 42 1 EVLEPL4248 546 42 48 1 1” Laminate End Panel - Right - 48” High EVLEPR4824 308 48 24 1 EVLEPR4830 391 48 30 1 EVLEPR4836 468 48 36 1 EVLEPR4842 544 48 42 1 EVLEPR4848 624 48 48 1

1” Laminate End Panel - Left - 48” High EVLEPL4824 308 48 24 1 EVLEPL4830 391 48 30 1 EVLEPL4836 468 48 36 1 EVLEPL4842 544 48 42 1 EVLEPL4848 624 48 48 1

EVLMP - 1” LAMINATE MIDDLE PANEL

• 1” Laminate Middle Panel attaches to a double inline connector.• Finished in thermally Fused Laminate.• Includes threaded metal inserts and support brackets to attach worksurfaces on

both sides.

• 1” Laminate middle panel has panel leveling glides.• If wood grain is selected, grain runs vertically.


1” Laminate Middle Panel - 42” High EVLMP4224 304 42 24 1 EVLMP4230 371 42 30 1 EVLMP4236 440 42 36 1 EVLMP4242 511 42 42 1 EVLMP4248 615 42 48 1 1” Laminate Middle Panel - 48” High EVLMP4824 340 48 24 1 EVLMP4830 421 48 30 1 EVLMP4836 498 48 36 1 EVLMP4842 577 48 42 1 EVLMP4848 656 48 48 1

PANELS 1” LAMINATE


EVLEPXXYYA - 1” LAMINATE END PANEL WITH ACCESSORY RAIL

• 1” Laminate End Panel attaches to an end of run connector. • Includes accessory rail.• Accessories can be used on accessory rail. Please see accessory section for

additional details.• Finished in thermally Fused Laminate.

• Includes threaded metal inserts and support brackets to attach a worksurface on one side.

• 1” Laminate end panel have panel leveling glides.• If wood grain is selected, grain runs vertically.


1” Laminate End Panel with EVLEPR4224A 309 42 24 1 Accessory Rail - Right - 42” High EVLEPR4230A 376 42 30 1 EVLEPR4236A 446 42 36 1 EVLEPR4242A 517 42 42 1 EVLEPR4248A 588 42 48 1 1” Laminate End Panel with EVLEPL4224A 309 42 24 1 Accessory Rail - Left - 42” High EVLEPL4230A 376 42 30 1 EVLEPL4236A 446 42 36 1 EVLEPL4242A 517 42 42 1 EVLEPL4248A 588 42 48 1

1” Laminate End Panel with EVLEPR4824A 346 48 24 1 Accessory Rail - Right - 48” High EVLEPR4830A 419 48 30 1 EVLEPR4836A 473 48 36 1 EVLEPR4842A 541 48 42 1 EVLEPR4848A 663 48 48 1 1” Laminate End Panel with EVLEPL4824A 346 48 24 1 Accessory Rail - Left - 48” High EVLEPL4830A 419 48 30 1 EVLEPL4836A 473 48 36 1 EVLEPL4842A 541 48 42 1 EVLEPL4848A 663 48 48 1

EVLMPXXYYA - 1” LAMINATE MIDDLE PANEL WITH ACCESSORY RAIL

• 1” Laminate Middle Panel attaches to a double inline connector.• Includes accessory rail.• Accessories can be used on accessory rail. Please see accessory section for

additional details.• Finished in thermally Fused Laminate.

• Includes threaded metal inserts and support brackets to attach a worksurface on one side.

• 1” Laminate middle panel has panel leveling glides.• If wood grain is selected, grain runs vertically.


1” Laminate Middle Panel with EVLMP4224A 348 42 24 1 Accessory Rail - 42” High EVLMP4230A 417 42 30 1 EVLMP4236A 490 42 36 1 EVLMP4242A 557 42 42 1 EVLMP4248A 629 42 48 1 1” Laminate Middle Panel with EVLMP4824A 384 48 24 1 Accessory Rail - 48” High EVLMP4830A 468 48 30 1 EVLMP4836A 544 48 36 1 EVLMP4842A 624 48 42 1 EVLMP4848A 702 48 48 1



EVPDIC - DOUBLE INLINE PANEL CONNECTOR

• Used to connect 1” laminate middle panel to panels of equal height in a straight run.

• Aluminum top trim for double inline connector must be used.

• Provides slotted support for worksurfaces and hardware support.• Includes two slotted posts with leveling glides and connection hardware.• Use 17” flexible mesh jumper cable to pass-through panels.


Double Inline Panel Connector EVPDIC42 121 42 2 EVPDIC48 127 48 2

EVPBIC - BELTLINE DOUBLE INLINE PANEL CONNECTOR

• Used to connect 1” laminate middle panel to panels of equal height in a straight run.

• Use in-between beltline panels.• Aluminum top trim for double inline connector must be used.

• Provides slotted support for worksurfaces and hardware support.• Includes two slotted posts with leveling glides and connection hardware.• Use 17” flexible mesh jumper cable to pass-through panels.


Beltline Double Inline Panel Connector EVPBDIC42 121 42 2 EVPBDIC48 127 48 2



EVPDVTF - DOUBLE INLINE CONNECTOR TRIM

• Attaches to exposed side of double inline connector.


Double Inline Connector Trim EVPDVTF42 14 42 EVPDVTF48 18 48

EVPTTA - DOUBLE INLINE PANEL CONNECTOR TOP TRIM - ALUMINUM

• Aluminum top trim is longer by 1.125” to cover width of panel and double inline connector.

• Trim cannot span a post connector.• Available in standard and premium paint colors.


Double Inline Connector Trim - EVPTTA25 16 25 Aluminum EVPTTA31 18 31 EVPTTA37 14 37 EVPTTA43 24 43 EVPTTA49 33 49 EVPTTA55 38 55 EVPTTA61 42 61 EVPTTA67 46 67 EVPTTA73 51 73 EVPTTA79 57 79 EVPTTA85 61 83

PANELS DOUBLE INLINE CONNECTOR


EVPDS - DOOR PANEL - SOLID

• All door surfaces are high pressure laminate• HP Laminate finish available in all standard Evolve colors (see Textiles & Finishes

page 240-241)• Two panel widths: 36” or 42” High• 84” Door Panel height = 66”H panel plus one 18”H Panel Extension Module• 90” Door Panel height = 66” H panel plus one 24”H or two 12”H Panel Extension

Modules• Door and door trim can be specified left- or right-handed (see diagram below)• Handedness of Door Panel can be changed in the field

• Select door frame color from standard trim colors (see Textiles & Finishes pages 240-241).

• Door Sizes: – 36”W Door is 33.63”W without frame (This door is not ADA compliant) – 42”W Door is 39.63”W without frame – 84”H Door is 81.5”H without frame – 90”H Door is 87.5”H without frame

• If laminate is selected in a wood grain, the grain runs vertical.• Customer is responsible to confirm and meet all city, county or any other

municipality codes in relation to door clearances.

DESCRIPTION PRODUCT CODE LIST PRICE DIMENSIONS/INCHES HPL H W D

Door Panel - Solid - EVPDS8436L 2085 84 36 2 7⁄8 84” High x 36” Wide EVPDS8436R 2085 84 36 2 7⁄8

Door Panel - Solid - EVPDS8442L 2413 84 42 2 7⁄8 84” High x 42” Wide EVPDS8442R 2413 84 42 2 7⁄8 Door Panel - Solid - EVPDS9036L 2085 90 36 2 7⁄8 90” High x 36” Wide EVPDS9036R 2085 90 36 2 7⁄8 Door Panel - Solid - EVPDS9042L 2413 90 42 2 7⁄8 90” High x 42” Wide EVPDS9042R 2413 90 42 2 7⁄884” Door 90” Door

Right Hand Hung Door Left Hand Hung Door

Knob Lock Set EVPDSL01 85 (Knob Lock Set is not ADA compliant) Lock set sold separately from doors. Specific core #’s and Master Key not available

Lever Lock Set EVPDSL02 118 Lock set sold separately from doors. Specific core #’s and Master Key not available

EVHHF01 - HIGH PROFILE FOOT

• Used to provide additional support to a panel run without adding additional panels. • Connects to the inline connector or end of run at the base of the panel.


High Profile Foot EVHHF01 252 6 1 21

PANELS DOORS


EVPDSL/R - SLIDING PRIVACY DOOR

• Sliding Privacy Door attaches to Evolve Panels using standard connectors to add privacy. Brackets that attach to Connectors are included.

• This door must mount on panels of equal width. It is also intended to be used for openings of equal width.

• Left (L) or right-handedness (R) is determined by the direction of door movement (from compressed to expanded position), while facing the door on the panel mounted side.

• Painted frame may match any Evolve Standard Paint Finish. The door interior is standard with a louvered acrylic finish.

• Telescoping arms eliminate the need for thresholds, wheels or casters.• 81”H door must connect to panels 84” or higher.• Thickness of louvered acrylic is 6 mm.


Sliding Privacy Door - 66” High EVPDSL6636R 2346 66 36 3 EVPDSL6636L 2346 66 36 3 EVPDSL6642R 2407 66 42 3 EVPDSL6642L 2407 66 42 3

Sliding Privacy Door - 81” High EVPDSL8136R 2477 81 36 3 EVPDSL8136L 2477 81 36 3 EVPDSL8142R 2660 81 42 3 EVPDSL8142L 2660 81 42 3

EVPDSLLOCK - SLIDING DOOR LOCK

• Lock bracket attaches to sliding door with screws. • Includes strike plate bracket which attaches to slots in connector.• Lock included.

• Lock sets sold separately from sliding doors. • Available in Tungsten only.


Sliding Door Lock - Right EVPDSLLOCKR 214 2.65 1.2 0.9

Sliding Door Lock - Left EVPDSLLOCKL 214 2.65 1.2 0.9

EVMPK02 - MINI PANEL KIT

• Evolve’s Mini Panel Kits are available to our dealers and their sales staff. • All Mini Panel Kit orders receive standard freight terms (5% of list)• The Evolve mini panel is an excellent sales tool featuring a cut away of a module

and samples of various hardware and electrical components and consists of the following:

• 1 EVPFP3024 30 x 24 Premium with cut-away• 1 EVPCP232 Two-way corner post• 1 EVPER30 End of run trim kit• 1 EVDHPT24 High Profile Top Cap

• 1 EVDCPHP2 Two-way High Profile Top Cap• 1 EVDPE4 Post Extension Lay in• 1 EVE8PD24 Power distribution housing• 1 EVE8CP16 Jumper Cable• 1 EVE8RDA/B Duplex Receptacle• 1 Pizza cutter spline tool• 1 Replacement fabric• 1 Panel Bag with Evolve Logo• 1 Parts Bag with Evolve Logo


Mini Panel Kit EVMPK02 2006 30 24 2 7/8

PANELS DOORS


TIPS!!

EVPIEC12

When ordering Panel Extension Modules, Inline Panel Extension Connectors (EVPIEC)must be ordered separately. Please see EVPIEC for details.

Inline Panel Extension Connectors connect two panel extension modules of equal heightin a straight run.

Extension connectors do not provide support for hang-onstorage components above 66”H.

When specifying stacking panels up to 66” H and usinga single full height connector additional single clamps(EVCLVAR $7 list each) are recommended. Order 2 clamps per extension module.

EXTENSION MODULES BY TYPE

Fabric Panel Extension Module

EVPFE06 EVPFE12 EVPFE18 EVPFE24

Fabric Panel Extension Module - Premium

EVPFPE24

Tempered Glass Panel Extension Module

EVPGTE06 EVPGTE12 EVPGTE18 EVPGTE24

Tempered Glass Panel Extension Module - Premium

EVPGPTE24

Write Board Extension Module - Single Sided

EVPW1SE18 EVPW1SE24

Write Board Extension Module - Double Sided

EVPW2SE18 EVPW2SE24

Laminate Extension Module - Single Sided

EVPH1SE06 EVPH1SE12 EVPH1SE18 EVPH1SE24

Laminate Extension Module - Double Sided

EVPH2SE06 EVPH2SE12 EVPH2SE18 EVPH2SE24

Air Flow Extension Module

EVPAE12 EVPAE18 EVPAE24

Open Panel Extension Module

EVPOE06 EVPOE12 EVPOE18 EVPOE24

Panel Mount Privacy Glass

EVPMP30G EVPMP36G

Panel Mount PET Felt Divider

EVFDK06P EVFDK12PDN

PANELS TECHNICAL INFORMATION/ TYPES


PANELS FABRIC - EXTENSION MODULE

EVPFE - FABRIC PANEL EXTENSION MODULE

• Attaches on top of a panel.• Modules can be stacked to add privacy or divide space. • Panel Extension Modules are not load bearing if installed higher than 66” High.• Each side of the fabric module may have a different fabric within the same grade

at no charge.

• If different grades of fabric are used on one module, the entire module must be priced at highest grade.

• When ordering Panel Extension Modules, additional connectors are required.


Fabric Panel Extension Module - 6” High EVPFE0618 133 137 6 18 2 7⁄8 EVPFE0624 135 143 6 24 2 7⁄8 EVPFE0630 148 158 6 30 2 7⁄8 EVPFE0636 165 177 6 36 2 7⁄8 EVPFE0642 186 195 6 42 2 7⁄8 EVPFE0648 200 214 6 48 2 7⁄8 EVPFE0654 216 230 6 54 2 7⁄8 EVPFE0660 232 250 6 60 2 7⁄8




EVPFPE - FABRIC PANEL EXTENSION MODULE - PREMIUM

• Attaches on top of a panel.• Modules can be stacked to add privacy or to divide space. • Panel Extension Modules are not load bearing above 66” High.• Each side of each module may have a different fabric within the same grade at

no charge.

• If different grades of fabric are used on the Panel Extension Module, the module must be priced at highest grade.

• When ordering Panel Extension Modules, additional connectors are required.


Fabric Panel Extension Module - Premium - EVPFPE2418 218 229 24 18 2 7⁄8 24”High EVPFPE2424 232 247 24 24 2 7⁄8 EVPFPE2430 261 278 24 30 2 7⁄8 EVPFPE2436 295 313 24 36 2 7⁄8 EVPFPE2442 330 354 24 42 2 7⁄8 EVPFPE2448 354 380 24 48 2 7⁄8 EVPFPE2454 392 420 24 54 2 7⁄8 EVPFPE2460 427 458 24 60 2 7⁄8


PANELS TEMPERED GLASS - EXTENSION MODULE

EVPGTE - TEMPERED GLASS PANEL EXTENSION MODULE

• Attaches on top of panel. • Modules can be stacked to add privacy or to divide space.• Panel Extension Modules are not load bearing above 66” H.


• Frosted Glass (FRST) 40% upcharge. Contact EVOLVE Customer Support for details.• When ordering Panel Extension Modules, additional connectors are required.


Tempered Glass Panel Extension Module - EVPGTE0618 257 6 18 2 7⁄8 6”High EVPGTE0624 278 6 24 2 7⁄8 EVPGTE0630 333 6 30 2 7⁄8 EVPGTE0636 350 6 36 2 7⁄8 EVPGTE0642 427 6 42 2 7⁄8 EVPGTE0648 477 6 48 2 7⁄8 EVPGTE0654 522 6 54 2 7⁄8 EVPGTE0660 562 6 60 2 7⁄8

Tempered Glass Panel Extension Module - EVPGTE1218 257 12 18 2 7⁄8 12” High EVPGTE1224 278 12 24 2 7⁄8 EVPGTE1230 333 12 30 2 7⁄8 EVPGTE1236 350 12 36 2 7⁄8 EVPGTE1242 427 12 42 2 7⁄8 EVPGTE1248 477 12 48 2 7⁄8 EVPGTE1254 522 12 54 2 7⁄8 EVPGTE1260 562 12 60 2 7⁄8

Tempered Glass Panel Extension Module - EVPGTE1818 387 18 18 2 7⁄8 18” High EVPGTE1824 399 18 24 2 7⁄8 EVPGTE1830 426 18 30 2 7⁄8 EVPGTE1836 466 18 36 2 7⁄8 EVPGTE1842 528 18 42 2 7⁄8 EVPGTE1848 592 18 48 2 7⁄8 EVPGTE1854 642 18 54 2 7⁄8 EVPGTE1860 689 18 60 2 7⁄8

Tempered Glass Panel Extension Module - EVPGTE2418 387 24 18 2 7⁄8 24”High EVPGTE2424 399 24 24 2 7⁄8 EVPGTE2430 426 24 30 2 7⁄8 EVPGTE2436 466 24 36 2 7⁄8 EVPGTE2442 528 24 42 2 7⁄8 EVPGTE2448 592 24 48 2 7⁄8 EVPGTE2454 642 24 54 2 7⁄8 EVPGTE2460 689 24 60 2 7⁄8

EVPGPTE - TEMPERED GLASS PREMIUM PANEL EXTENSION MODULE

• Attaches to top of a panel.• Modules can be stacked to add privacy or to divide space.• Panel Extension Modules are not load bearing above 66” H.


• Frosted Glass (FRST) 40% upcharge. Contact EVOLVE Customer Support for details.• When ordering Panel Extension Modules, additional connectors are required.


Tempered Glass Premium Panel EVPGPTE2418 382 24 18 2 7⁄8 Extension Module - 24”High EVPGPTE2424 424 24 24 2 7⁄8 EVPGPTE2430 483 24 30 2 7⁄8 EVPGPTE2436 551 24 36 2 7⁄8 EVPGPTE2442 610 24 42 2 7⁄8 EVPGPTE2448 685 24 48 2 7⁄8 EVPGPTE2454 747 24 54 2 7⁄8 EVPGPTE2460 809 224 60 2 7⁄8


PANELS WRITE BOARD - EXTENSION MODULE

EVPW1SE - WRITE BOARD EXTENSION MODULE - SINGLE SIDED

• Attaches on top of a panel.• Provides writing surface on a Single Side.• Modules can be stacked to add privacy or to divide space.• Panel Extension Modules are not load bearing above 66” H.

• When ordering Panel Extension Modules, additional connectors are required.• High pressure only• Use erasable Write Board markers only.


Write Board Extension Module - Single Sided EVPW1SE1818 195 201 18 18 2 7⁄8 18”High EVPW1SE1824 224 231 18 24 2 7⁄8 EVPW1SE1830 251 258 18 30 2 7⁄8 EVPW1SE1836 294 303 18 36 2 7⁄8 EVPW1SE1842 328 340 18 42 2 7⁄8 EVPW1SE1848 361 374 18 48 2 7⁄8 EVPW1SE1854 393 406 18 54 2 7⁄8 EVPW1SE1860 424 438 18 60 2 7⁄8

Write Board Extension Module - Single Sided EVPW1SE2418 195 201 24 18 2 7⁄8 24”High EVPW1SE2424 224 231 24 24 2 7⁄8 EVPW1SE2430 251 258 24 30 2 7⁄8 EVPW1SE2436 294 303 24 36 2 7⁄8 EVPW1SE2442 328 340 24 42 2 7⁄8 EVPW1SE2448 361 374 24 48 2 7⁄8 EVPW1SE2454 393 406 24 54 2 7⁄8 EVPW1SE2460 424 438 24 60 2 7⁄8

EVPW2SE - WRITE BOARD EXTENSION MODULE - DOUBLE SIDED

• Attaches on top of a panel.• Provides writing surface on two sides.• Modules can be stacked to add privacy or to divide space.• Panel Extension Modules are not load bearing above 66” H.

• When ordering Panel Extension Modules, additional connectors are required.• High pressure only• Use erasable Write Board markers only.


Write Board Extension Module - EVPW2SE1818 236 18 18 2 7⁄8 Double Sided - 18”High EVPW2SE1824 278 18 24 2 7⁄8 EVPW2SE1830 320 18 30 2 7⁄8 EVPW2SE1836 375 18 36 2 7⁄8 EVPW2SE1842 424 18 42 2 7⁄8 EVPW2SE1848 473 18 48 2 7⁄8 EVPW2SE1854 523 18 54 2 7⁄8 EVPW2SE1860 570 18 60 2 7⁄8

Write Board Extension Module - EVPW2SE2418 236 24 18 2 7⁄8 Double Sided - 24”High EVPW2SE2424 278 24 24 2 7⁄8 EVPW2SE2430 320 24 30 2 7⁄8 EVPW2SE2436 375 24 36 2 7⁄8 EVPW2SE2442 424 24 42 2 7⁄8 EVPW2SE2448 473 24 48 2 7⁄8 EVPW2SE2454 523 24 54 2 7⁄8 EVPW2SE2460 570 24 60 2 7⁄8


PANELS LAMINATE - EXTENSION MODULE

EVPH1SE - LAMINATE EXTENSION MODULE - SINGLE SIDED

• Attaches on top of a panel.• Laminate face on the module provides a durable, washable surface on Single Side

of the panel.• Modules can be stacked to add privacy or to divide space.

• Panel Extension Modules are not load bearing above 66” H.• When ordering Panel Extension Modules, additional connectors are required.• Available in high pressure only.


Laminate Extension Module - Single Sided EVPH1SE0618 182 187 6 18 2 7⁄8 6” High EVPH1SE0624 212 214 6 24 2 7⁄8 EVPH1SE0630 237 239 6 30 2 7⁄8 EVPH1SE0636 269 273 6 36 2 7⁄8 EVPH1SE0642 304 306 6 42 2 7⁄8 EVPH1SE0648 332 341 6 48 2 7⁄8 EVPH1SE0654 375 383 6 54 2 7⁄8 EVPH1SE0660 394 398 6 60 2 7⁄8





PANELS LAMINATE - EXTENSION MODULE

EVPH2SE - LAMINATE EXTENSION MODULE - DOUBLE SIDED

• Attaches on top of a panel.• Laminate faces on both sides of the module provide durable, washable surfaces• Modules can be stacked to add privacy or to divide space.• Panel Extension Modules are not load bearing above 66” H

• When ordering Panel Extension Modules, additional connectors are required.• Available in high pressure only.


Laminate Extension Module - Double Sided EVPH2SE0618 196 6 18 2 7⁄8 6” High EVPH2SE0624 231 6 24 2 7⁄8 EVPH2SE0630 267 6 30 2 7⁄8 EVPH2SE0636 306 6 36 2 7⁄8 EVPH2SE0642 348 6 42 2 7⁄8 EVPH2SE0648 388 6 48 2 7⁄8 EVPH2SE0654 449 6 54 2 7⁄8 EVPH2SE0660 470 6 60 2 7⁄8





PANELS AIRFLOW - EXTENSION MODULE

EVPAE - AIR FLOW EXTENSION MODULE

• Metal air flow panel extension• Attaches to top of panel• Modules can be stacked to add privacy or to divide space.

• Panel Extension Modules are not load bearing above 66” H.• When ordering Panel Extension Modules, additional connectors are required.


Air Flow Extension Module - 12” High EVPAE1224 236 12 24 2 7⁄8 EVPAE1230 281 12 24 2 7⁄8 EVPAE1236 319 12 24 2 7⁄8 EVPAE1242 352 12 24 2 7⁄8 EVPAE1248 399 12 24 2 7⁄8 EVPAE1254 460 18 54 2 7⁄8 EVPAE1260 525 12 24 2 7⁄8




PANELS OPEN - EXTENSION MODULE

EVPOE - OPEN PANEL EXTENSION MODULE

• Attaches to top portion of a panel.• Modules can be stacked to add privacy or to divide space

• Panel Extension Modules are not load bearing above 66” H.• When ordering Panel Extension Modules, additional connectors are required.


Open Panel Extension Module - 6” High EVPOE0618 209 6 18 2 7⁄8 EVPOE0624 214 6 24 2 7⁄8 EVPOE0630 261 6 30 2 7⁄8 EVPOE0636 273 6 36 2 7⁄8 EVPOE0642 331 6 42 2 7⁄8 EVPOE0648 372 6 48 2 7⁄8 EVPOE0654 406 6 54 2 7⁄8 EVPOE0660 438 6 60 2 7⁄8





PANELS INLINE EXTENSION - BRIDGE PANEL

EVPIECBS - BRIDGE PANEL INLINE EXTENSION CONNECTOR

• Connects bridge panel to inline extension connector.• Includes one bridge extension connector and connecting hardware.


Bridge Panel Inline Extension Connector EVPIECBS06 34 6 3 3 EVPIECBS12 34 12 3 3 EVPIECBS18 41 18 3 3 EVPIECBS24 41 24 3 3

EVPEERBSA - BRIDGE PANEL END OF RUN EXTENSION CONNECTOR - ALUMINUM TRIM

• Connects at end of run of bridge panel and can attach panel to fixed wall.• Adds 1” to width of panel run.

• Provides slotted support for worksurfaces and hang on components up to 66”H.• Includes one slotted bridge extension connector and connecting hardware and

trim kit.


Bridge Panel End of Run Extension Connector EVPEERBSA06 37 6 3 3 Aluminum Trim EVPEERBSA12 37 12 3 3 EVPEERBSA18 45 18 3 3 EVPEERBSA24 45 24 3 3

EVPICBS - BRIDGE PANEL INLINE CONNECTOR WITHOUT ALUMINUM INSERT

• Connects two bridge panels to inline connector.• Inline connector in middle between two bridge panels, above opening, using

double clamp at bottom.

• Includes one bridge extension connector without aluminum insert, includes connecting hardware.


Bridge Panel Inline Connector EVPICBS06 34 6 3 3 without Aluminum Insert EVPICBS12 34 12 3 3 EVPICBS18 41 18 3 3 EVPICBS24 41 24 3 3


PANELS EXTENSION POST - BRIDGE PANEL

EVPCEPB1 - BRIDGE PANEL CORNER EXTENSION POST 1 WAY

• Connects at end of a run of extension modules.• Post and connecting hardware add 3.25” to power beam run.

• Includes one extension post, one slotted extension connectors for bridge panel, connecting hardware and trim kit.


Bridge Panel Inline Extension Connector EVPCEPBSA106 64 6 3 3 EVPCEPBSA112 64 12 3 3 EVPCEPBSA118 81 18 3 3 EVPCEPBSA124 81 24 3 3


• Connects two bridge panels in 90 degree configuration.• Post and connecting hardware add 3.25” to power beam run.

• Includes one extension post, two one slotted extension connectors for bridge panel, connecting hardware and trim kit.


Bridge Panel Corner Extension Post 2 way EVPCEPBSA206 66 6 3 3 EVPCEPBSA212 66 12 3 3 EVPCEPBSA218 103 18 3 3 EVPCEPBSA224 103 24 3 3


• Connects three bridge panels in T degree configuration.• Post and connecting hardware add 3.25” to power beam run.

• Includes one extension post, three one slotted extension connectors for bridge panel, connecting hardware and trim kit.


Bridge Panel Corner Extension Post 3 way EVPCEPBSA306 79 6 3 3 EVPCEPBSA312 79 12 3 3 EVPCEPBSA318 123 18 3 3 EVPCEPBSA324 123 24 3 3


PANELS EXTENSION POST - BRIDGE PANEL


• Connects four bridge panels in X degree configuration.• Post and connecting hardware add 3.25” to power beam run.

• Includes one extension post, four one slotted extension connectors for bridge panel, connecting hardware and trim kit.


Bridge Panel Corner Extension Post 4 way EVPCEPBS406 91 6 3 3 EVPCEPBS412 91 12 3 3 EVPCEPBS418 135 18 3 3 EVPCEPBS424 135 24 3 3

EVPCEIPBSA2 - BRIDGE PANEL INLINE TWO WAY POST EXTENSION

• Connects two bridge panels in straight run.• Post and connecting hardware add 3.25” to power beam run.

• Includes one extension post, two slotted extension connectors for bridge panel, connecting hardware and trim kit.


Bridge Panel Inline Extension Post 2 way EVPCEIPBSA206 70 6 3 3 EVPCEIPBSA212 70 12 3 3 EVPCEIPBSA218 113 18 3 3 EVPCEIPBSA224 113 24 3 3


PANELS FABRIC - BRIDGE MODULE

EVPFEB - FABRIC PANEL BRIDGE MODULE

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps on top and at bottom.• Each side of fabric module may have different fabric within the same grade at no

charge.


• When ordering bridge modules , additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Fabric Panel Bridge Module - 6” High EVPFEB0618 133 137 6 18 3 EVPFEB0624 135 143 6 24 3 EVPFEB0630 148 158 6 30 3 EVPFEB0636 165 177 6 36 3 EVPFEB0642 186 195 6 42 3 EVPFEB0648 200 214 6 48 3 EVPFEB0654 216 230 6 54 3 EVPFEB0660 232 250 6 60 3




EVPFPEB - FABRIC PANEL BRIDGE MODULE - PREMIUM

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps on top and at bottom.• Each side of fabric module may have different fabric within the same grade at no

charge.


• When ordering bridge modules , additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Fabric Panel Bridge Module - Premium EVPFPEB2418 218 229 24 18 3 EVPFPEB2424 232 247 24 24 3 EVPFPEB2430 261 278 24 30 3 EVPFPEB2436 295 313 24 36 3 EVPFPEB2442 330 354 24 42 3 EVPFPEB2448 354 380 24 48 3 EVPFPEB2454 392 420 24 54 3 EVPFPEB2460 427 458 24 60 3


PANELS GLASS - BRIDGE MODULE

EVPGTEB - TEMPERED GLASS BRIDGE MODULE

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps on top and at bottom.• Standard in Clear (CLR) or smoked (SMK) as a option.• Please note that smoked glass (SMK) has 51% light transmittence.

• Frosted glass (FRST) 40% upcharge. Contact Evolve Customer support for details.• When ordering bridge modules, additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Tempered Glass Bridge Module - 6” High EVPGTEB0618 257 6 18 3 EVPGTEB0624 278 6 24 3 EVPGTEB0630 333 6 30 3 EVPGTEB0636 350 6 36 3 EVPGTEB0642 427 6 42 3 EVPGTEB0648 477 6 48 3 EVPGTEB0654 522 6 54 3 EVPGTEB0660 562 6 60 3




EVPGPTEB - TEMPERED GLASS BRIDGE MODULE - PREMIUM

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps at bottom.• Standard in Clear (CLR) or smoked (SMK)as a option.• Please note that smoked glass (SMK) has 51% light transmittence.

• Frosted glass (FRST) 40% upcharge. Contact Evolve Customer support for details.• When ordering bridge modules, additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Tempered Glass Bridge Module - Premium EVPGPTEB2418 382 24 18 3 EVPGPTEB2424 424 24 24 3 EVPGPTEB2430 483 24 30 3 EVPGPTEB2436 551 24 36 3 EVPGPTEB2442 610 24 42 3 EVPGPTEB2448 685 24 48 3 EVPGPTEB2454 747 24 54 3 EVPGPTEB2460 809 24 60 3


EVPW1SEB - WRITE BOARD BRIDGE MODULE - SINGLE SIDED

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps at bottom.• Provides writing surface on Single side.• Panel extension module is not load bearing if installed higher than 66” High.

• Use erasable Write Board markers only.• When ordering bridge modules, additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Write Board Bridge Module - 6” High EVPW1SEB0618 182 186 6 18 3 Single Sided EVPW1SEB0624 212 218 6 24 3 EVPW1SEB0630 237 240 6 30 3 EVPW1SEB0636 269 276 6 36 3 EVPW1SEB0642 304 309 6 42 3 EVPW1SEB0648 332 383 6 48 3 EVPW1SEB0654 375 383 6 54 3 EVPW1SEB0660 394 402 6 60 3




PANELS WRITE BOARD - BRIDGE MODULE


EVPW2SEB - WRITE BOARD BRIDGE MODULE - DOUBLE SIDED

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps at bottom.• Provides writing surface on Single side.• Panel extension module is not load bearing if installed higher than 66” High.

• Available in high pressure only.• Use erasable Write Board markers only.• When ordering bridge modules, additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Write Board Bridge Module - 6” High EVPW2SEB0618 196 6 18 3 Double Sided EVPW2SEB0624 231 6 24 3 EVPW2SEB0630 267 6 30 3 EVPW2SEB0636 306 6 36 3 EVPW2SEB0642 348 6 42 3 EVPW2SEB0648 388 6 48 3 EVPW2SEB0654 449 6 54 3 EVPW2SEB0660 459 6 60 3

Tempered Glass Bridge Module - 12” High EVPW2SEB1218 196 12 18 3 Double Sided EVPW2SEB1224 231 12 24 3 EVPW2SEB1230 267 12 30 3 EVPW2SEB1236 306 12 36 3 EVPW2SEB1242 348 12 42 3 EVPW2SEB1248 388 12 48 3 EVPW2SEB1254 449 12 54 3 EVPW2SEB1260 459 12 60 3



PANELS WRITE BOARD - BRIDGE MODULE


PANELS LAMINATE - BRIDGE MODULE

EVPH1SEB - LAMINATE BRIDGE MODULE - SINGLE SIDED

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps at bottom.• Laminate face on module provides durable, washable surface on Single side of

panel.

• Panel extension module is not load bearing if installed higher than 66” High.• Available in high pressure only.• When ordering bridge modules , additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Laminate Bridge Module - 6” High EVPH1SEB0618 182 186 6 18 3 Single Sided EVPH1SEB0624 212 218 6 24 3 EVPH1SEB0630 237 240 6 30 3 EVPH1SEB0636 269 276 6 36 3 EVPH1SEB0642 304 309 6 42 3 EVPH1SEB0648 332 340 6 48 3 EVPH1SEB0654 375 383 6 54 3 EVPH1SEB0660 394 402 6 60 3





PANELS LAMINATE - BRIDGE MODULE

EVPH2SEB - LAMINATE BRIDGE MODULE - DOUBLE SIDED

• Bridge modules connects two panels above opening.• Requires bridge extension connectors, connects with clamps at bottom.• Laminate face on both sides of the module provides durable, washable surface.• Panel extension module is not load bearing if installed higher than 66” High.

• When ordering panel extension modules, additional connectors are required.• Available in high pressure only.• When ordering bridge modules , additional bridge connectors are required.• Aluminum trim for bottom to be ordered separately.


Laminate Bridge Module - 6” High EVPH2SEB0618 196 6 18 3 Double Sided EVPH2SEB0624 231 6 24 3 EVPH2SEB0630 267 6 30 3 EVPH2SEB0636 306 6 36 3 EVPH2SEB0642 348 6 42 3 EVPH2SEB0648 388 6 48 3 EVPH2SEB0654 449 6 54 3 EVPH2SEB0660 459 6 60 3





PANELS PRIVACY GLASS - EXTENSION MODULE

EVPMPNXXGIP - 12” H PANEL MOUNT PRIVACY GLASS W/ NOTCHED TOP TRIM FOR INLINE VARIABLE HEIGHT CONNECTOR

• Privacy Glass integrated with aluminum top trim.• Attaches on top of panels to add privacy or divide space. • Includes aluminum top trim with channel with notched end and glass tile. • Standard in clear (CLR) or frosted (FRST) glass.

• Aluminium trim must be specified for entire station when ordering panel mount privacy glass.

• Glass and attachment hardware to ship separately

DESCRIPTION PRODUCT CODE LIST PRICE DIMENSIONS/INCHES Clear Frosted H W D

Panel Mount Privacy Glass w/ Notched Top Trim EVPMPN24GIP 210 256 12 24 2 7/8 for Variable Height Connector - 12” High EVPMPN30GIP 228 261 12 30 2 7/8 EVPMPN36GIP 243 266 12 36 2 7/8 EVPMPN42GIP 254 294 12 42 2 7/8 EVPMPN48GIP 268 321 12 48 2 7/8 EVPMPN54GIP 279 347 12 54 2 7/8 EVPMPN60GIP 287 374 12 60 2 7/8

EVPMPDNXXGIP - 12” H PANEL MOUNT PRIVACY GLASS W/ DOUBLE NOTCHED TOP TRIM FOR INLINE VARIABLE HEIGHT CONNECTOR

• Privacy Glass integrated with aluminum top trim. • Attaches on top of panels to add privacy or divide space.• Includes aluminum top trim with channel with notched ends and glass tile. • Standard in clear (CLR) or frosted (FRST) glass.

• Aluminium trim must be specified for entire station when ordering panel mount privacy glass.

• Glass and attachment hardware to ship separately.


Panel Mount Privacy Glass w/ double notched EVPMPDN24GIP 210 256 12 24 2 7/8 top trim for variable height connector - 12” High EVPMPDN30GIP 228 261 12 30 2 7/8 EVPMPDN36GIP 243 266 12 36 2 7/8 EVPMPDN42GIP 254 294 12 42 2 7/8 EVPMPDN48GIP 268 321 12 48 2 7/8 EVPMPDN54GIP 279 347 12 54 2 7/8 EVPMPDN60GIP 287 374 12 60 2 7/8



EVPMPXXGIP - PANEL MOUNT PRIVACY GLASS W/ ALUMINUM TRIM • Attaches on top of Evolve Panels to add privacy or divide space.• Privacy Glass is integrated into the aluminum top trim.

• Includes aluminum trim with channel and glass tile • Standard in clear (CLR) or frosted (FRST) glass.


Panel Mount Privacy Glass w/ EVPMP24GIP 210 256 12 24 2 7/8 Aluminum Trim - 24” Wide Panel Mount Privacy Glass w/ EVPMP30GIP 228 261 12 30 2 7/8 Aluminum Trim - 30” Wide Panel Mount Privacy Glass w/ EVPMP36GIP 243 266 12 36 2 7/836”W Shown Aluminum Trim - 36” Wide

Panel Mount Privacy Glass w/ EVPMP42GIP 254 294 12 42 2 7/8 Aluminum Trim - 42” Wide Panel Mount Privacy Glass w/ EVPMP48GIP 268 321 12 48 2 7/8 Aluminum Trim - 48” Wide Panel Mount Privacy Glass w/ EVPMP54GIP 279 347 12 54 2 7/8 Aluminum Trim - 54” Wide

Panel Mount Privacy Glass w/ EVPMP60GIP 287 374 12 60 2 7/8 Aluminum Trim - 60” Wide

EVPMPXXGI6P - 6” H PANEL MOUNT PRIVACY GLASS W/ ALUMINUM TRIM

• Attaches on top of Evolve Panels to add privacy or divide space.• Privacy Glass is integrated into the aluminum top trim. • Aluminum trim must be specified for entire station when ordering panel mount

privacy glass.

• Includes aluminum trim with channel and glass tile • Glass and attachment hardware ship separately. • Standard in clear (CLR) or frosted (FRST) glass.


6” H Panel Mount Privacy Glass w/ EVPMP24GI6P 210 256 6 24 2 7/8 Aluminum Trim - 24” Wide 6” H Panel Mount Privacy Glass w/ EVPMP30GI6P 228 261 6 30 2 7/8 Aluminum Trim - 30” Wide 6” H Panel Mount Privacy Glass w/ EVPMP36GI6P 243 266 6 36 2 7/836”W Shown Aluminum Trim - 36” Wide

6” H Panel Mount Privacy Glass w/ EVPMP42GI6P 254 294 6 42 2 7/8 Aluminum Trim - 42” Wide 6” H Panel Mount Privacy Glass w/ EVPMP48GI6P 268 321 6 48 2 7/8 Aluminum Trim - 48” Wide 6” H Panel Mount Privacy Glass w/ EVPMP54GI6P 279 347 6 54 2 7/8 Aluminum Trim - 54” Wide

6” H Panel Mount Privacy Glass w/ EVPMP60GI6P 287 374 6 60 2 7/8 Aluminum Trim - 60” Wide



EVPMPXXGI9P - 9”H PANEL MOUNT PRIVACY GLASS W/ ALUMINUM TRIM

• Attaches on top of Evolve Panels to add privacy or divide space.• Privacy Glass is integrated into the aluminum top trim. • Aluminum trim must be specified for entire station when ordering panel mount

privacy glass.

• Includes aluminum trim with channel and glass tile • Glass and attachment hardware ship separately. • Standard in clear (CLR) or frosted (FRST) glass.


9” H Panel Mount Privacy Glass w/ EVPMP24GI9P 203 244 9 24 2 7/8 Aluminum Trim - 24” Wide 9” H Panel Mount Privacy Glass w/ EVPMP30GI9P 221 249 9 30 2 7/8 Aluminum Trim - 30” Wide 9” H Panel Mount Privacy Glass w/ EVPMP36GI9P 243 254 9 36 2 7/836”W Shown Aluminum Trim - 36” Wide 9” H Panel Mount Privacy Glass w/ EVPMP42GI9P 246 280 9 42 2 7/8 Aluminum Trim - 42” Wide 9” H Panel Mount Privacy Glass w/ EVPMP48GI9P 260 305 9 48 2 7/8 Aluminum Trim - 48” Wide 9” H Panel Mount Privacy Glass w/ EVPMP54GI9P 270 330 9 54 2 7/8 Aluminum Trim - 54” Wide

9” H Panel Mount Privacy Glass w/ EVPMP60GI9P 278 357 9 60 2 7/8 Aluminum Trim - 60” Wide

EVPMPXXGIW - 12” H PRIVACY GLASS W/ ALUMINUM TRIM FOR 1” LAMINATE PANEL

• Attaches on top of Evolve 1” Laminate Panels to add privacy or divide space.• Privacy Glass is integrated into the aluminum top trim. • Aluminum trim has rail for accessories.

• Includes aluminum trim with end caps and glass tile • Glass and attachment hardware ship separately. • Standard in clear (CLR) or frosted (FRST) glass.


12” H Privacy Glass w/ Aluminum Trim EVPMP24GIW 203 236 12 24 1 for 1” Laminate Panel - 24” Wide 12” H Privacy Glass w/ Aluminum Trim EVPMP30GIW 221 241 12 30 1 for 1” Laminate Panel- 30” Wide 12” H Privacy Glass w/ Aluminum Trim EVPMP36GIW 235 246 12 36 136”W Shown for 1” Laminate Panel - 36” Wide

12” H Privacy Glass w/ Aluminum Trim EVPMP42GIW 246 280 12 42 1 for 1” Laminate Panel- 42” Wide 12” H Privacy Glass w/ Aluminum Trim EVPMP48GIW 260 305 12 48 1 for 1” Laminate Panel - 48” Wide


PANELS PET FELT DIVIDER - EXTENSION MODULE

EVFDK06P - 6” PANEL MOUNTED FELT DIVIDER

• Privacy felt panel integrated with aluminum top trim.• Attaches on top of panels to add privacy or divide space. Includes aluminum trim

with channel and felt tile.• Aluminum trim must be specified for entire station when ordering panel mount

privacy felt.

• Felt and attachment hardware to ship separately.• 9mm thick Felt material is tackable and comes in 3 different colors.

Please specify color. Graphite (GPH), Mist (MTS) or Pewter (PWT).

DESCRIPTION PRODUCT CODE LIST PRICE DIMENSIONS/INCHES Gr1 H W D

6” Privacy felt panel integrated with EVFDK0624P 83 6 24 2 7⁄8 aluminum top trim EVFDK0630P 97 6 30 2 7⁄8 EVFDK0636P 115 6 36 2 7⁄8 EVFDK0642P 129 6 42 2 7⁄8 EVFDK0648P 192 6 48 2 7⁄8 EVFDK0654P 209 6 54 2 7⁄8 EVFDK0660P 225 6 60 2 7⁄8 EVFDK0666P 237 6 66 2 7⁄8 EVFDK0672P 268 6 72 2 7⁄8




privacy felt.








privacy felt.




12” Privacy felt panel integrated with EVFDK01224P 83 12 24 2 7⁄8 aluminum top trim EVFDK01230P 97 12 30 2 7⁄8 EVFDK01236P 115 12 36 2 7⁄8 EVFDK01242P 129 12 42 2 7⁄8 EVFDK01248P 192 12 48 2 7⁄8 EVFDK01254P 209 12 54 2 7⁄8 EVFDK01260P 225 12 60 2 7⁄8

NEW!

NEW!

NEW!


PANELS PET FELT DIVIDER - EXTENSION MODULE

EVFDK12PN - 12” PANEL MOUNTED FELT DIVIDER, 1 NOTCH



privacy felt.




12” Privacy felt panel integrated with EVFDK1224PN 83 12 22.68 2 7⁄8 aluminum top trim with 1 Notch EVFDK1230PN 97 12 28.68 2 7⁄8 EVFDK1236PN 115 12 34.68 2 7⁄8 EVFDK1242PN 129 12 40.68 2 7⁄8 EVFDK1248PN 192 12 46.68 2 7⁄8 EVFDK1254PN 209 12 52.68 2 7⁄8 EVFDK1260PN 225 12 58.68 2 7⁄8

EVFDK12PDN - 12” PANEL MOUNTED FELT DIVIDER, 2 NOTCHES



privacy felt.




12” Privacy felt panel integrated with EVFDK1224PDN 83 12 21.44 2 7⁄8 aluminum top trim with 2 Notches EVFDK1230PDN 97 12 27.44 2 7⁄8 EVFDK1236PDN 115 12 33.44 2 7⁄8 EVFDK1242PDN 129 12 39.44 2 7⁄8 EVFDK1248PDN 192 12 45.44 2 7⁄8 EVFDK1254PDN 209 12 51.44 2 7⁄8 EVFDK1260PDN 225 12 57.44 2 7⁄8




privacy felt.





NEW!

NEW!

NEW!


PANELS CEILING FILLER - PRIVACY DIVIDER

EVPFDK06XXPCF - 6” H PANEL MOUNT PRIVACY DIVIDER CEILING FILLER KIT

• Privacy Felt Divder integrated with aluminum top trim.• Attaches on top of panels to add privacy or divide space.• Includes aluminum trim with channel and Felt tile.• Felt tile and attachment hardware to ship separately.

• Felt material available in 3 different colors. Please specify colors.• Aluminum top trim available in standard paint finishes.• PVC cap for closing gap at ceiling included.• PVC cap available in white only.


6"

9"

Panel Mount Felt Divider Ceiling Filler Kit EVFDK0618PCF 79 6 18 EVFDK0624PCF 95 6 24 EVFDK0630PCF 112 6 30 EVFDK0636PCF 132 6 36 EVFDK0642PCF 149 6 42 EVFDK0648PCF 221 6 48 EVFDK0654PCF 239 6 54 EVFDK0660PCF 259 6 60 EVFDK0666PCF 273 6 66 EVFDK0672PCF 308 6 72

EVPFDK06XXPCFP - 6” H PANEL MOUNT PRIVACY DIVIDER CEILING FILLER KIT

• Privacy Felt Divder integrated with aluminum top trim• Attaches on top of panels to add privacy or divide space.• Includes aluminum trim with channel and Felt tile.• Felt tile and attachment hardware to ship separately.• Felt material available in 3 different colors. Please specify colors.

• Felt tile is longer and ovarhangs half of width of post.• Aluminum trim is width of panel.• Aluminum top trim available in standard paint finishes.• PVC cap for closing gap at ceiling included.• PVC cap available in white only.


6"

9"

Panel Mount Felt Divider Ceiling Filler at Post Kit EVFDK0619PCF 95 6 19 3/4 EVFDK0625PCF 112 6 25 3/4 EVFDK0631PCF 132 6 31 3/4 EVFDK0637PCF 149 6 37 3/4 EVFDK0643PCF 221 6 43 3/4 EVFDK0649PCF 239 6 49 3/4 EVFDK0655PCF 259 6 55 3/4 EVFDK0661PCF 273 6 61 3/4 EVFDK0667PCF 308 6 67 3/4 EVFDK0673PCF 345 6 73 3/4

NEW!

NEW!


EVPFDK09XXPCF - 9” H PANEL MOUNT PRIVACY DIVIDER CEILING FILLER KIT

• Privacy Felt Divder integrated with aluminum top trim.• Attaches on top of panels to add privacy or divide space.• Includes aluminum trim with channel and Felt tile.• Felt tile and attachment hardware to ship separately.

• Felt material available in 3 different colors. Please specify colors.• Aluminum top trim available in standard paint finishes.• PVC cap for closing gap at ceiling included.• PVC cap available in white only.


6"

9"

Panel Mount Felt Divider Ceiling Filler Kit EVFDK0918PCF 79 9 18 EVFDK0924PCF 95 9 24 EVFDK0930PCF 112 9 30 EVFDK0936PCF 132 9 36 EVFDK0942PCF 149 9 42 EVFDK0948PCF 221 9 48 EVFDK0954PCF 239 9 54 EVFDK0960PCF 259 9 60 EVFDK0966PCF 273 9 66 EVFDK0972PCF 308 9 72

EVPFDK09XXPCFP - 9” H PANEL MOUNT PRIVACY DIVIDER CEILING FILLER KIT

• Privacy Felt Divder integrated with aluminum top trim• Attaches on top of panels to add privacy or divide space.• Includes aluminum trim with channel and Felt tile.• Felt tile and attachment hardware to ship separately.• Felt material available in 3 different colors. Please specify colors.

• Felt tile is longer and ovarhangs half of width of post.• Aluminum trim is width of panel.• Aluminum top trim available in standard paint finishes.• PVC cap for closing gap at ceiling included.• PVC cap available in white only.


6"

9"

Panel Mount Felt Divider Ceiling Filler at Post Kit EVFDK0919PCF 95 9 19 3/4 EVFDK0925PCF 112 9 25 3/4 EVFDK0931PCF 132 9 31 3/4 EVFDK0937PCF 149 9 37 3/4 EVFDK0943PCF 221 9 43 3/4 EVFDK0949PCF 239 9 49 3/4 EVFDK0955PCF 259 9 55 3/4 EVFDK0961PCF 273 9 61 3/4 EVFDK0967PCF 308 9 67 3/4 EVFDK0973PCF 345 9 73 3/4

PANELS CEILING FILLER - PRIVACY DIVIDER

NEW!

NEW!

panels - evolve furniture group · 2020-04-09 · technical features of evolve panels: • evolve...

Documents