A-8(860) 346-1809
LOCATION MAP
SITE MAP
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
1. CONTRACTOR SHALL TAKE AND VERIFY ALL DIMENSIONS IN THE FIELD, AND SHALL BE HELD RESPONSIBLE FOR CONTRACTOR SHALL TAKE AND VERIFY ALL DIMENSIONS IN THE FIELD, AND SHALL BE HELD RESPONSIBLE FOR THE SAME. 2. CONTRACTOR SHALL TAKE AND VERIFY ALL DIMENSIONS AND CONDITIONS PRIOR TO BEGINNING ANY WORK AND CONTRACTOR SHALL TAKE AND VERIFY ALL DIMENSIONS AND CONDITIONS PRIOR TO BEGINNING ANY WORK AND NOTIFY OWNER OF ANY DISCREPANCIES. 3. CONTRACTOR SHOULD FULLY UNDERSTAND THAT THE WORK INCLUDES THE USE OF A MANUFACTURER'S CONTRACTOR SHOULD FULLY UNDERSTAND THAT THE WORK INCLUDES THE USE OF A MANUFACTURER'S CERTIFIED/APPROVED INSTALLERS IN ORDER TO OBTAIN LONG TERM MANUFACTURER'S GUARANTEE. 4. THE DIVISION OF WORK AMONG THE VARIOUS TRADES OR SUBCONTRCTORS (IF ANY) NECESSARY AND THE THE DIVISION OF WORK AMONG THE VARIOUS TRADES OR SUBCONTRCTORS (IF ANY) NECESSARY AND THE COORDINATING OF THE TOTAL WORK IS THE CONTRACTOR'S RESPONSIBILITY. 5. THE CONTRACTOR SHALL CONFINE MOVEMENTS ON THE OWNERS PROPERTY TO AREAS DESIGNATED ON THE THE CONTRACTOR SHALL CONFINE MOVEMENTS ON THE OWNERS PROPERTY TO AREAS DESIGNATED ON THE SITE PLAN AND AS DESIGNATED AT THE PRE-CONSTRUCTION. 6. FASTENERS ARE MECHANICAL FASTENERS OR AS INDICATED. FASTENERS USED IN THE WORK ARE TO PROVIDE 1 FASTENERS ARE MECHANICAL FASTENERS OR AS INDICATED. FASTENERS USED IN THE WORK ARE TO PROVIDE 1 1/2" PENETRATION INTO THE SUBSTRATE OR AS REQUIRED BY THE FASTENER MANUFACTURER. 7. FLASHINGS ARE TO BE INSTALLED IN A WATER-SHEDDING FASHION. FLASHINGS ARE TO BE INSTALLED IN A WATER-SHEDDING FASHION. 8. PROVIDE PROPER TYPE CAULKING/SEALANT IN ALL AREAS INDICATED ON DRAWINGS AND AS REQUIRED FOR A PROVIDE PROPER TYPE CAULKING/SEALANT IN ALL AREAS INDICATED ON DRAWINGS AND AS REQUIRED FOR A WATERTIGHT ROOF. 9. WHERE THE WORD "EXISTING" APPEARS WITH DESCRIPTIONS, NOTATIONS, DIRECTIVES, EXPLANATIONS, WHERE THE WORD "EXISTING" APPEARS WITH DESCRIPTIONS, NOTATIONS, DIRECTIVES, EXPLANATIONS, REQUIREMENTS, ETC., THROUGH OUT THE DRAWINGS AND SPECIFICATIONS, SUCH AS "EXISTING METAL DECK", "EXISTING BRICK WALL", THE REFERRED TO ITEM OR ITEMS OF WORK SHALL BE UNDERSTOOD AS MEANING WORK TO: 9.1. REMAIN IN PLACE WITHOUT MAJOR CHANGES, BUT, SHALL INCLUDE ALL OTHER CHANGES, ADJUSTMENTS, REMAIN IN PLACE WITHOUT MAJOR CHANGES, BUT, SHALL INCLUDE ALL OTHER CHANGES, ADJUSTMENTS, REQUIREMENTS, ETC., NECESSARY FOR THE ITEMS OF WORK TO BE PROPERLY INTEGRATED INTO AND COMBINED WITH THE NEW AND EXISTING SPECIFIED WORK IN THE CONTRACT, OR, 9.2. REMOVED, DISPOSED OF AND/OR REINSTALLED, INCLUDING ALL CHANGES, ADJUSTMENTS, REQUIREMENTS, ETC., REMOVED, DISPOSED OF AND/OR REINSTALLED, INCLUDING ALL CHANGES, ADJUSTMENTS, REQUIREMENTS, ETC., NECESSARY FOR THE ITEMS OF WORK TO BE PROPERLY DEMOLISHED, REMOVED, CHANGED, ADJUSTED, AND PROPERLY INTEGRATED AND COMBINED WITH NEW AND EXISTING WORK SPECIFIED IN THE EXCEPT AS SPECIFIED ABOVE, ALL OTHER DESCRIPTIONS, NOTATIONS, DIRECTIVES, EXPLANATIONS, REQUIREMENTS, ETC., THROUGH OUT THE DRAWINGS AND SPECIFICATIONS, SUCH AS "BUILT-UP ROOF SYSTEM", "METAL BASE FLASHING", "BUILT-UP ROOF SYSTEM", "NEW METAL BASE FLASHING", SHALL BE UNDERSTOOD AS MEANING ALL REQUIREMENTS OF ALL WORK UNDER THE CONTRACT. 10. IN THE EVENT OF CONFLICT BETWEEN APPLICABLE CODES AND REGULATIONS AND THE STANDARDS OF THE IN THE EVENT OF CONFLICT BETWEEN APPLICABLE CODES AND REGULATIONS AND THE STANDARDS OF THE CONTRACT DOCUMENTS, THE MORE STRINGENT PROVISIONS SHALL GOVERN. 11. ALL NOTES AND DIMENSIONS DESIGNATED AS TYPICAL (TYP.) APPLY TO ALL LIKE OR SIMILAR CONDITIONS ALL NOTES AND DIMENSIONS DESIGNATED AS TYPICAL (TYP.) APPLY TO ALL LIKE OR SIMILAR CONDITIONS THROUGHOUT THE DRAWINGS. 12. REMOVE AND REINSTALL MISCELLANEOUS ITEMS FOUND ON THE ROOF WHICH WILL STANDARDS OF INTERFERE REMOVE AND REINSTALL MISCELLANEOUS ITEMS FOUND ON THE ROOF WHICH WILL STANDARDS OF INTERFERE WITH THE INSTALLATION OF THE NEW ROOF. PROVIDE ALL FLASHINGS, PITCH POCKETS, ETC., REQUIRED FOR A WATERTIGHT ROOF.
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE FASTENED WITH ADHESIVE TO 12" GLASS REINFORCED GYPSUM BOARD FASTENED WITH ADHESIVE " PER FOOT POLYISOCYANURATE 14" PER FOOT POLYISOCYANURATE INSULATION (1.5" MINIMUM THICKNESS) FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO VAPOR BARRIER FASTENED WITH ADHESIVE TO EXISTING CONCRETE DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
.090 EPDM MEMBRANE FASTENED WITH ADHESIVE TO " GLASS REINFORCED GYPSUM BOARD 12" GLASS REINFORCED GYPSUM BOARD FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION MECHCANICALLY FASTENED TO EXISTING SLOPED METAL DECK PER MANUFACTURER'S SPEC., (DECK SLOPED A MIN. OF " PER FT.) STAGGER 14" PER FT.) STAGGER ALL JOINTS
AutoCAD SHX Text
.090 EPDM MEMBRANE FASTENED WITH ADHESIVE TO 12" GLASS REINFORCED GYPSUM BOARD FASTENED WITH ADHESIVE " PER FOOT POLYISOCYANURATE 14" PER FOOT POLYISOCYANURATE INSULATION (1.5" MINIMUM THICKNESS) FASTENED WITH ADHESIVE TO 1.5" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO EXISTING METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
.090 EPDM MEMBRANE FASTENED WITH ADHESIVE TO 12" GLASS REINFORCED GYPSUM BOARD FASTENED WITH ADHESIVE " PER FOOT POLYISOCYANURATE 14" PER FOOT POLYISOCYANURATE INSULATION (1" MINIMUM THICKNESS) FASTENED WITH ADHESIVE TO VAPOR BARRIER FASTENED WITH ADHESIVE TO EXISTING CONCRETE DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
.090 EPDM MEMBRANE FASTENED WITH ADHESIVE TO 12" GLASS REINFORCED GYPSUM BOARD FASTENED WITH ADHESIVE " PER FOOT POLYISOCYANURATE 14" PER FOOT POLYISOCYANURATE INSULATION (1.5" MINIMUM THICKNESS) FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO EXISTING METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
REMOVE EXISTING DOOR AND FRAME AND PROVIDE NEW HOLLOW METAL DOOR AND FRAME, SEE DETAIL 6/A-6 AND ELEVATION 2/A-7
AutoCAD SHX Text
REMOVE EXISTING DOOR AND FRAME AND PROVIDE NEW HOLLOW METAL DOOR AND FRAME, SEE DETAIL 6/A-6 AND ELEVATION 3/A-7
AutoCAD SHX Text
STATE PROJECT NUMBER:
AutoCAD SHX Text
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 1- " FLAT STOCK 12" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 3"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 1- " FLAT STOCK 12" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 3".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PROVIDE NEW P.T. WOOD BLOCKING AS REQUIRED BY NEW ROOF SYSTEM DEPTH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
P.T. WOOD BLOCKING
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING METAL DECK, SLOPED A MINIMUM OF " PER 1'-0"14" PER 1'-0"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING METAL DECK SLOPED " PER 1'-0" MIN. 14" PER 1'-0" MIN.
AutoCAD SHX Text
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
2.6" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
EXTEND EXISTING VENT STACK AS REQUIRED TO MAINTAIN 12" MIN. ABOVE ROOF
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
EXISTING METAL DECK SLOPED " PER 1'-0" MIN. 14" PER 1'-0" MIN.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
STATE PROJECT NUMBER:
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW ROOF HATCH
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISO INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS.
AutoCAD SHX Text
EXISTING ALUMINUM WINDOW
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISO INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS.
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISO INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
EXISTING METAL DECK SLOPED " PER 1'-0" MIN. 14" PER 1'-0" MIN.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
2.6" FLAT STOCK POLYISOCYANURATE INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISOCYANURATE INSULATION MECHANICALLY FASTENED TO METAL DECK PER MANUFACTURER'S SPEC., STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING METAL DECK SLOPED " PER 1'-0" MIN. 14" PER 1'-0" MIN.
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
6"x6"x1'-0" .040 ALUMINUM SCUPPER BOX FOR LENGTH OF OPENING. PROVIDE 4 FASTENERS.
AutoCAD SHX Text
3"x4" .040 ALUMINUM RAINWATER LEADER. EXTEND AND DISCHARGE TO GROUND. PROVIDE 3 ANCHOR STRAPS.
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
EXISTING METAL DECK
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
EXISTING METAL DECK
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING CONCRETE DECK
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISO INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISO INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISO INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING CONCRETE DECK
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
2.6" FLAT STOCK POLYISO INSULATION FASTENED WITH ADHESIVE TO 2.6" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS.
AutoCAD SHX Text
AutoCAD SHX Text
EXTEND EXISTING VENT STACK AS REQUIRED TO MAINTAIN 12" MIN. ABOVE ROOF
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PROVIDE NEW P.T. WOOD BLOCKING AS REQUIRED BY NEW ROOF SYSTEM DEPTH
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
P.T. WOOD BLOCKING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
RESPONSIBLE TO COORDINATE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
STATE PROJECT NUMBER:
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW ROOF HATCH
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
EXISTING STRUCTURE V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
EXISTING STRUCTURE V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.040 ALUMINUM FLASHING, CUTOUT REGLET MIN 1- " DEEP, 12" DEEP, INSTALL LEAD WEDGES @ 6" O.C.
AutoCAD SHX Text
REMOVE EXISTING FLASHING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
EXISTING STRUCTURE V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING " CDX PLYWOOD V.I.F.38" CDX PLYWOOD V.I.F. CDX PLYWOOD V.I.F.
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, MECHANICALLY FASTENED TO EXISTING METAL DECK, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NEW " CDX PLYWOOD TO 34" CDX PLYWOOD TO MATCH EXISTING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
AutoCAD SHX Text
14" PER FOOT TAPERED POLYISO INSULATION (WITH 1- " MINIMUM THICKNESS), FASTENED 12" MINIMUM THICKNESS), FASTENED WITH ADHESIVE TO 2.7" FLAT STOCK POLYISO INSULATION, FASTENED WITH ADHESIVE TO VAPOR BARRIER, STAGGER ALL JOINTS. MINIMUM INSULATION DEPTH TO BE 4.2".
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
BASE AND 3" SEAM TAPE NAIL 12" O.C. ALONG ENTIRE MEMBRANE EDGE
AutoCAD SHX Text
AutoCAD SHX Text
.090 EPDM MEMBRANE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
EXISTING COVER BOARD
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
STATE PROJECT NUMBER:
AutoCAD SHX Text
ARCHITECTS, LLC
HIBBARD & ROSA
AutoCAD SHX Text
106 MORGAN LANE
AutoCAD SHX Text
AutoCAD SHX Text