ST Fastening Systems ©2017

Patent Pending

® New Micro-Bit Engineering™MB ™

• 304 Stainless Rivet/Mandrel---3/16” Grip Range• Available in 31 standard architectural colors

• Fasten fiberglass or polycarbonate roof sheets together at the overlap• 316 Stainless screw & washer assembled to rubber sleeve

• Attach plywood or structural lumber to steel framing or structural steel

• Attach rigid insulation to wood or light gauge steelframing

• Wafer Head & Pancake Head for metal standing seam • Applications into wood or steel available with RUSPERT coating or 304 Stainless Steel

*Note: ROLLING CHANGE - The new Micro-Bit™ will completely replace the Type 17 sharp point as current inventories are depleted.

MAXX ™FASTENING SYSTEM

MAXX

• Metal to metal self-drill up to .210” steel thickness.• Stitch screw used to fasten 2 layers of 26 gauge sidelap metal.

LOW PROFILEECLIPSE™

• T-30 Round Head metal to metal self-drill up to .210” steel thickness.

ZXL™ FASTENING SYSTEM40 YEAR WARRANTY

ZXL

• Metal to metal self-drill up to 0.210” steel thickness .• 5/16” CHWH ZAMAC 5 zinc-aluminum alloy molded head.• Stitch screw used to fasten 2 layers of 26 gauge sidelap metal.

HEAVY GAUGE40 YEAR WARRANTY

ZXL HG™ HG

• Metal to metal self-drill up to .500” steel thickness.• ZXL™ HG 5/16” CHWH ZAMAC 5 zinc-aluminum alloy molded head.

REPLACEMENT40 YEAR WARRANTY

ZXL TAPPING TAPPING

• ZXL™ Tapping is a #14/#17 Diameter replacement screw.

• #17 Diameter replacement screw for original screws that have stripped out.

KWIKSEAL® FASTENING SYSTEM

KWIKSEAL MB

™MB• Metal to Wood Micro-Bit drill point.• Carbon steel with POWDERFUL powder paint.• Stitch designed to fasten 2 layers of 29 gauge sidelap metal.

LOW PROFILEECLIPSE MB

™MB• T-25 Round head Metal to Wood Micro-Bit drill point.

* See Note at Bottom of Page

ZXL™ MB FASTENING SYSTEM40 YEAR WARRANTY

ZXL MB

™MB• Metal to Wood Micro-Bit drill point.• 5/16” CHWH ZAMAC 5 zinc-aluminum alloy molded head• Stitch designed to fasten 2 layers of 29 gauge sidelap metal.

REPLACEMENT40 YEAR WARRANTY

ZXL TAPPING #14 TYPE 17 TAPPING

• ZXL Tapping is a #14 Diameter sharp point replacement.

• 5/16” HWH Replacement screw for nails or smaller screws that have stripped out.

• 3/8” HWH Replacement screw for nails or screws that have stripped out.

STAINLESS STEEL FASTENERS40 YEAR WARRANTY

HSS™ SS™ ST-XL™

™MB• Metal/Aluminum to wood sharp point.• HSS threads/micro-Bit drill point are hardened to self-drill through steel up to 24 gauge• SS has a non-hardened tip & requires a pre-drilled hole.

• Metal to Wood Micro-Bit drill point.• 1/4” CHWH 304 Stainless Steel cap.• ST-XL stitch will remain as a sharp point until inventory is depleted.* See Note at Bottom of Page

™MB

TOTAL SOURCE PRODUCT LINE

Sealtite Building Fasteners© 2016

®

® 6357 Reynolds Road, Tyler, Texas 75708P.O. Box 4515, Tyler, Texas 75712

800-352-4864 • 800-352-3940 Fax

9950 Princeton Glendale Rd.Cincinnati, OH 45246

800-944-8920 • 800-352-3940 Fax

• HWH Short & Long magnetic sockets• HWH Long spring retainer sockets for non-magnetic screws

/

• Acrylic & Urethane sealants for use on substrates such as steel, aluminum, wood, & concrete.

• Square ROOFJACK that conforms to any roof configuration• Available in EPDM & Hi-Temperature Silicone for high heat applications

• Snow & ice protection guard for post-frame buildings• Available in 28 powder coated colors

*Ventilated roll product for metal roof ridge cap applications*Non-woven, UV resistant, polyester fabric with an acrylic binder

• Square/Phillips combination driver for Pancake & Wafer screws• 6-Lobe driver for ECLIPSE MB WOODBINDER & STEELBINDER

100 Series MRS

• Silicone sealant that is solvent free.• Excellent choice for attaching ROOFJACK to GALVALUME coated substrate.• Available in all major metal roof manufacturer colors.

• Round ROOFJACK that conforms to any roof configuration.• Available in EPDM & Hi-Temperature Silicone for high heat applications

• Expansion anchor attaches equipment & metal base angles to concrete.

• Retrofit Round ROOFJACK for applications where standard flashing cannot be used• Stainless teeth firmly secure the boot.

• Open cell foam formulated for maximum air flow • Good choice for angled/hip metal roof applications.

EMSEAL® AST

• Foam Tape infused with water-based acrylic asphalt emulsion.• Good alternative to butyl tape sealant & other foam strips for use on roof applications.

• Laminated polyethylene foam die-cut to conform to metal roof profiles to close gaps• Applications include ridge & eave metal

• 100% solids, asbestos free butyl tape sealant• Applications include metal roof side laps, ridge vents, flashings

• EPDM ROOFJACK designed for extreme angle applications up to 65 degrees.

• Fix-A-Flash is designed to cover oversized holes with smaller pipe penetrations.• Available in Black EPDM & Hi-Temperature Silicone for high heat applications.

• 25’ Polyurethane foam strips used to close voids in metal roof applications

©2016 Hargis Industries Inc. dba ST Fastening Systems. All rights reserved. Copies of information and images may be printed for personal use only. No part of this publication may be reproduced or reused for any other purpose without prior written permission of ST Fastening Systems. Steelbinder, Woodbinder, Maxx Self Drill, ST, Kwik-Seal and Duraseal are registered trademarks of Hargis Industries Inc. dba ST Fastening Systems. Emseal is a registered trademark of Emseal Joint Systems LTD. Novaflex is a registered trademark of Foam Seal, Inc. Tacky Tape is a registered trademark of Illinois Tool Works, Inc.

• Anchor designed for light duty & tamper proof applications to masonry---brick, block or stone

EXPANSION JOINT

• Expansion Joint roll flashing is designed for transition walls, parapet walls, stepped roofs, roof penetrations.• Material is ozone resistant EPDM with flexible/shapeable aluminum bands.

FIX-A-FLASH

• Retrofit Square ROOFJACK for applications where a standard flashing will not work.•Fasteners snaps & cable tie secure the boot.

• Snow & ice protection for residential standing seam metal roof applications

MRC

www.stfasteningsystems.com