SEIKO Supercede IIPatented 100% Internal Free Form Design

.50

.25+6.00

.75

.50

.25+5.00

.75

.50

.25+4.00

.75

.50

.25+3.00

.75

.50

.25+2.00

.75

.50

.25+1.00

.75

.50

.25PLANO

.25

.50

.75-1.00

.25

.50

.75-2.00

.25

.50

.75-3.00

.25

.50

.75-4.00

.25

.50

.75-5.00

.25

.50

.75-6.00

.25

.50

.75-7.00

.25

.50

.75-8.00

.25

.50

.75-9.00

.25

.50

.75-10.00

.25

.50

.75-11.00

.25

.50

.75-12.00

.25

.50

0.00 .2

5.5

0.7

5-1

.00

.25

.50

.75

-2.0

0.2

5.5

0.7

5-3

.00

.25

.50

.75

-4.0

0

CYLINDER POWER

SPH

ERE

POW

ER

1.74, 1.67* & 1.60

1.60 1.67*

1.50*

1.59* & Trivex®

1.59* & Trivex®

1.74

Adds: +0.50 to +3.50 in 0.25 steps*Polarized ranges will vary

1.74 -12.50 to +6.50 (total power -12.50)1.67 -10.50 to +6.50 (total power -10.50)1.60 -8.50 to +6.50 (total power -8.50)1.59 & Trivex -7.00 to +5.001.50 -5.00 to +4.00

757065

Distance Ref. Pt.

Fitting CrossGeometric Center

Prism Ref. Pt.

10mm

Specifications

Name: Supercede IILens Type: 100% internal free-form progressiveCorridor Length: 10/12/14mm Minimum Fitting Height: 14/16/18mmFitting Point: Lens geometric centerPrism: 0.25 to 3.00DAdd Power: +0.50 to +3.50 in 0.25D stepsMeasured Power: Intermediate and near

575 Corporate Dr., Mahwah, NJ 07430 11545 Encore Circle, Hopkins, MN 55343

www.seikoeyewear.com

SEIKO Optical Products of America, Inc.

SEIKO Supercede II lenses use a universal blended design that provides wide distance vision and an extra wide reading area. It is a good choice for emerging presbyopes, as well as experienced wearers, and is ideally suited for all add power prescriptions and for those with visually demanding lifestyles.

Advanced aspheric compensation (AAC) in the intermediate and near visual zones optimizes the optical performance in the as-worn position. AAC alters the surface power to deliver the prescribed power when

the lens is positioned in front of the eye. It also reduces aberrations caused by varying vertex distance and compensates for pantoscopic tilt as the eyes converge from the fitting point to the reading area. This “measured power” is printed on the job envelope for easier verification.

Three corridor lengths are available: 10, 12 and 14mm with minimum fitting heights of 14, 16 and 18mm, respectively. A wide variety of materials is available in clear, polarized and Transitions® lenses.

Materials & Coating Options

Clear Polarized Transitions® Transitions® Transitions® Transitions® XTRActive™ Sportswear™ Vantage™

1.50 R R R R

1.53 (Trivex) R R R R R

1.59 (Poly) R R R R R R

1.60 R R 1.67 R R R R R R

1.74 R

• Universal blended design provides wide distance and extra wide reading area• Advanced aspheric compensation in the intermediate and near zones

• Measured power creates the best vision in the as-worn position• Three corridor lengths: 10/12/14mm, Minimum fitting heights: 14/16/18mm

• Large variety of materials in clear, polarized and Transitions® lenses• Made in the USA

Transitions and the swirl are registered trademarks, and XTRActive, SOLFX, and Vantage are trademarks of Transitions Optical, Inc., Pinellas Park, FL.

©2012 Seiko Optical Products of America, Inc. All rights reserved. 7/2012

07381