ACOUSTI-MAT®

SD PATenTeD SOUnD COnTrOl

fOr 9/16" STeel DeCk COnSTrUCTIOn

feATUreS & BenefITS• Fast, easy installation — requires just

one underlayment pour, speeding overall project time to completion

• UL Fire Designs• GREENGUARD Gold Certified• May help contribute toward points

for LEED® project certification• System warranty that covers both

Acousti-Mat SD and the Maxxon Underlayment

MEEt A toUGh SoUND CoNtRoL ChALLENGE with thE SMArT SOUnD COnTrOl SOlUTIOn

For proven, superior sound control in steel frame construction, Acousti-Mat SD

delivers the patented technology that meets the challenge. Designed to fit the flutes

of 9/16" – 21⁄2" o.c. corrugated steel decking, the Acousti-Mat SD System isolates

sound waves that historically have been difficult to control.

Fast, easy installation of Acousti-Mat SD is completed with the topping of a

high-strength Maxxon® Underlayment. No longer limited to “quiet” carpet and

pad alone, Acousti-Mat SD opens projects to any floor goods option, from vinyl

plank to wood to ceramic tile, without the associated sound transmission concerns.

ACOUSTI-MAT SDAlways a “Green” Building Material

Now, Even Steel Deck Construction has a Proven

Sound Control Solution

For more info: 800-356-7887 • Email: info@maxxon.com www.MaxxonCorporation.com

MADE IN THE USAAnother superior product from: Maxxon® Corporation • 920 Hamel Road • P.O. Box 253 Hamel, MN 55340 USA • 763-478-9600 • Fax: 763-478-2431

Underwriters Laboratories Inc.® Listed

©2011–2014 Maxxon Corporation. All Rights Reserved. Acousti-Mat and associated logos are registered trademarks of Maxxon Corporation, Hamel, MN, USA. Printed in the USA. #62065, TA502-7176, 10/14.

SOUnD TeSTSUnderlayment Insulation Truss Depth Resilient

Channel Drywall Floor Covering Rating Test Number

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 2 layers 5/8" F-STC 59 A1472.16-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 2 layers 5/8" VCT F-IIC 49 A1472.01-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 2 layers 5/8" Floating Wood F-IIC 57 A1472.10-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 2 layers 5/8" Tile Ceramic F-IIC 51 A1472.07-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 2 layers 5/8" Vinyl F-IIC 55 A1472.04-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 2 layers 5/8" Carpet and Pad F-IIC 83 A1472.13-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 5/8" (16 mm) F-STC 57 A1472.17-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 5/8" (16 mm) VCT F-IIC 48 A1472.02-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 5/8" (16 mm) Floating Wood F-IIC 55 A1472.11-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 5/8" (16 mm) Tile Ceramic F-IIC 51 A1472.08-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 5/8" (16 mm) Vinyl F-IIC 52 A1472.05-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) Yes 5/8" (16 mm) Carpet and Pad F-IIC 76 A1472.14-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) N/A Suspended 5/8" F-STC 57 A1472.18-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) N/A Suspended 5/8" VCT F-IIC 51 A1472.03-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) N/A Suspended 5/8" Floating Wood F-IIC 54 A1472.12-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) N/A Suspended 5/8" Tile Ceramic F-IIC 51 A1472.09-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) N/A Suspended 5/8" Vinyl F-IIC 53 A1472.06-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 12" (305 mm) N/A Suspended 5/8" Carpet and Pad F-IIC 73 A1472.15-201-10

11⁄2" (38 mm) 31⁄2" (89 mm) 91⁄4" (235 mm) Yes 5/8" (16 mm) Quarry Tile IIC 51 7008081

11⁄2" (38 mm) 31⁄2" (89 mm) 91⁄4" (235 mm) Yes 5/8" (16 mm) STC 57 5008033

FiRE RAtiNGSUL# Hour Rating Type of Construction

G551 1, 2 Clark/Dietrich Building Systems Steel Joist 24" o.c. with min 9/16” deep, 22 MSG corrugated steel deck, resilient channel

G553 1, 2 Clark/Dietrich Building Systems Steel Joist 24" o.c. with min 9/16” deep, 22 MSG corrugated steel deck, resilient channel

G560 2 Dietrich industries Steel Joist, 24" o.c. with 22 MSG corrugated steel deck

G561 1, 2 Vulcraft Corrugated Steel Floor and Form Units topped with 21⁄2" Concrete

G563 1 Marino\wARE Steel Joist, 24" o.c. with 22 MSG corrugated steel deck

G566 1 Gateway Panel Steel Joist, 24" o.c. with 22 MSG corrugated steel deck

G574 1 California Expanded Metal Company Steel Joist, 24" o.c. with 22 MSG corrugated steel deck

SteelStud

Reinforcement

MaxxonFloorPrimer

Maxxon approved reinforcement

Corrugated Steel DeckAcousti-Mat SD

Gypsum Board*

Wall isolation**

Acoustical Sealant 1 " approved Maxxon Underlayment

Acousti-Mat Tapeor equivalent

Acousti-Mat SD on Corrugated Steel Deck®

®

®

12

DEtAiL DRAwiNGS

Resilient Channel

Acousti-MatSD

Reinforcement

Batt Insulation

5/8" (16 mm) Gypsum Board

22 MSG galv corrugated fluted steel deck 9/16"

(15 mm) deep

11⁄2" (38 mm) minimum Maxxon® Underlayment

11⁄2 "

91⁄4" (231 mm) Steel Joist

LEED® INFORMATIONFor information regarding how Acousti-Mat SD may contribute toward points for LEED project

contribution, contact your Regional Representative at (800) 356-7887 or visit www.maxxon.com/go_green.

SoUND tESt iNFoRMAtioN: All acoustical testing was done by Architectural Testing; Riverbank Testing Laboratories; Intest, Inc.; Twin City Testing Corporation; Maxxon R&D Test Center; D.L. Adams Associates, L.T.D.; Veneklasen Associates; NGC Testing Services; AV Group or JGL Acoustics. For type of floor covering used, channel spacing and other information, contact Maxxon for test reports by number. International Building Code (IBC) requires a minimum 50 STC/IIC (45 F-STC/F-IIC) in multifamily construction. Because an STC/IIC of 50 provides only marginal sound control, the International Code Council (ICC), author of the IBC, now recommends that an “acceptable” level of performance for both STC and IIC is 55 (52 if field tested). The “preferred” level of performance for STC and IIC is 60 (57 if field tested). Maxxon Underlayments and Acousti-Mat are but single components of an effective sound control system. No sound control system is better than its weakest component. Care must be taken in the installation of all components of construction to ensure the ultimate designed acoustical performance.wARRANtY: Maxxon® Corporation warrants Acousti-Mat® SD to be free from manufacturing defects as defined in this warranty. Manufacturing defects are considered to be those defects that occur due to the quality of the ingredients or from the manufacturing process itself. This warranty does not include labor costs and other costs or expenses associated with the removal or installation of Acousti-Mat SD. Because Maxxon Corporation does not perform the actual installation, it cannot be held responsible for the results of the application. Maxxon Corporation specifically disclaims problems that occur due to weather conditions, structural movement, structural design flaws and appli-cation techniques. This warranty is in lieu of all other warranties expressed or implied including the warranty of merchantability and fitness of a particular purpose and of all other obligations or liabilities on Maxxon Corporation’s part. Maxxon Corporation neither assumes nor authorizes any person to assume for Maxxon Corporation any liability in connection with the sale and installation of Acousti-Mat SD.

tEChNiCAL DAtA

Thickness, nominal .....7/8" (21 mm) pyramids with 1/4" (6 mm) minimum between peaks

Description .............. Black mesh with water resistant fabric, 40% pre-consumer recycled

Density ............................................. 1.92 pcf (30.7 kg/m3)

Mat only ..........................................................1.440Underlayment ....................................................0.288Mat/Underlayment .............................................1.728

Thermal Resistance R-Value (ft2•°F•h/BtU)

50 psf (244 kg/m2) .......................... 0.034" (0.86 mm)100 psf (488 kg/m2) ........................ 0.064" (1.63 mm)200 psf (976 kg/m2) ........................ 0.115" (2.92 mm)300 psf (1464 kg/m2) ...................... 0.175" (4.45 mm)

Pressure/Deflection

Fuel Contribution .......................................................0Smoke Density ..........................................................0Flame Spread .........................................NFPA Class A

Fire Performance AStM E-84

Maxxon Underlayment w/ Reinforcement ....11⁄2" (38mm)Underlayment Depth

FiRE/SoUND RAtiNGSEvaluation Reports - Meeting fire and sound code together

Accepted by local building officials for fire and sound code compliance, Evaluation Reports are technical reports which verify that specific products meet the following code requirements and warrant regulatory approval. Minimum code requirements: Sound - 50 STC/IIC, Fire - I Hour

International Code CouncilICC ESR #2540 For the following assembly types:

Additional ICC ES Reports: ESR #1141, ESR #1153, ESR #1774

Underwriters Laboratory InternationalUL ER #8477-01 For the following assembly types:• Parallel Chord Truss• 2x10 Wood Truss

• I-Joist• Hambro

• Steel Joist• Precast Concrete

• Parallel Chord Truss• 2x10 Wood Truss

• I-Joist• Steel Joist

• Precast Concrete