pattern for bolero.docx
TRANSCRIPT
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 1/9
Pattern for Crochet Version of Ribbed
“Lace” Bolero June 15, 2010 Posted by misscraftyfingers in Crafts, Crochet, Free Pattern, Tutorial, Tutorials.
Tags: Bolero, Crochet, Tutorial
trackback I got a couple of request for the pattern of my crocheted version of the ribbed lace bolero, so
here it is.
This is a really easy crochet pattern, inspired from the knitted version here. And it‟s not really
lace, it‟s more like mesh.
Anyway, first of all, measurements. This is based on the description from the knitted version.
It‟s the same logic as the knit version, so credit‟s not mine.
Measure your shoulder span. Add 4 inches for each sleeve. So, if my shoulder span is 17
inches, I add 8 inches to it, which brings about a total of 25 inches.This will be the width of
the bolero.
Next, measure your upper arm. Mine measures 12.5 inch. Add 6.5 inch to this measurement.
This will be be the length of the bolero, which is 19 inches.
After that, you will have to calculate the number of chains required to start this project.
You will need to chain in multiples of 4 + 2 chain.
So, if for example, my gauge is 4 stitches per inch. My shoulder measurement is a total of 25
inches. So, (25 x 4) + 2 = 102. I will need to chain 102 to start.
If my gauge is 6 stitches per inch, this is how I calculate: 25 x 6 =150. However, 150 is not a
multiple of 4, that is, you cannot divide it by 4 and get a whole number. The closest number
to 150 divisible by 4 to get a whole number is either 148 or 152. So, in this case, I‟d go with
148 + 2. I like my shrug snug rather than loose.
Abbreviations:
Ch = Chain
SC = Single Crochet
DC = Double Crochet
FPDC = Front Post Double Crochet
BPDC = Back Post Double Crochet
Start of Pattern:
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 2/9
Chain __. (the total # of stitches calculated as per your measurements. Mine‟s 102)
Ribbed Row 1: SC into the 2nd chain from hook. SC in the bar of each chain till the end. Ch 3,
turn. (This Ch 3 will be your first double crochet).
(SC into the bar of the chain will allow you to have a even finish on both ends of your shrug)
Ribbed Row 2: BPDC into the 2nd SC post. * FPDC into the next 2 SC post. BPDC into the next
2 SC bars.* Repeat from * to * till end. You should end with a BPDC stitch at the end. Ch 3,
turn.
The last stitch on the just finished row was a BPDC. When you turn, it will become a BPDC. So,
on the new row, you will have to start with a FPDC.
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 3/9
(The ribbing is created with 2 BPDC, 2 FPDC, repeat till end. or 2 FPDC followed by 2 BPDC till
end .. depending on wh ich side your crocheting on)
Ribbed Row 3: FPDC into the 2nd post. *BPDC into next 2 posts, followed by FPDC into next 2
posts*. Repeat * to * till end.
Repeat Rows 2 and 3 until the ribbed rows reach about 3 inches, it‟s time to start with the
body of the shrug.
Body Rows:
Ch 3 at the end of the last ribbed stitch. DC into the top of the 2nd stitch from chain 3. *Ch 2.
skip 2 stitches. DC into the next 2 stiches.* Repeat * to * till end. Ch 3, turn. Repeat body row
till desired length minus 3 inches is achieved. Ch 1, turn.
Finishing Ribbed Rows:
Finishing Ribbed Row 1: SC into next stitch from chain 1. *2 SC into the space of the chain 2 in
the previous row. 1 SC into the top of the next 2 stitches.* Repeat * to * till end.
Finishing Ribbed Row 2: Here you have to check your stitches on the ribbed rows in the
beginning. If the corresponding stitch on the other end is a BPDC, then you should start this
row with BPDC (or vice versa). So looking at the pictures, row 2 should be done in BPDC into
2nd post of sc, followed by FPDC into next 2 sc posts and BPDC into next 2 sc posts. Repeat
till end.
Finishing Ribbed Row 3: This will follow the logic of the beginning rows. Repeat Finishing
Ribbed Rows 2-3 till you reach 3 inches of the finishing ribbed rows.
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 4/9
When you‟re done, your work should look like this (kinda, this is a miniature version )
Fold the ribbed rows ends towards each other. Sew up the matched ribbed rows on each side.
This will create the armholes and sleeves of the shrug. (You can sew up the ribbed rows with
the ends of your yarn or you can weave in the ends and sew with a matching thread.
Whichever way that works for you. )
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 5/9
I used about 1 2/3 skein of yarn. The yarn I used was Sirdar‟s Wash „n‟ Wear Double Crepe
Dk, fyi.
The specs of the yarn are:
Blend: 55% Acrylic, 45% Nylon
Ball weight: 100g
Yardage: 270m/296y
I used a 4.25mm, G hook. I didn‟t do a gauge but I just measured on my shrug. It‟s about 6
stitches per inch across and 3 double crochet rows per inch tall (if that makes sense to you).
I hope the pattern and my explanation makes sense. Let me know if you need clarification or
spot a mistake.
Depending on your size, especially if you‟re big like me, it‟s gonna take a while to crochet this
because it‟s gonna be a BIG PIECE OF CLOTH by the time you‟re done. If you‟re tiny, then I
guess you will be able to finish it fast!
The bolero will look like this. You can wear it with the ribbed rows folded or not!
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 6/9
Sorry the pictures aren‟t great. I really don‟t know how some of the popular crafters take the
pictures for their tutorials. I don‟t have a tripod nor an awesome camera. It‟s so hard to take
pics when you‟re actually doing the do.
I‟d really love comments! And if you do make this bolero, please let me know! I would love to
see it!
Have fun making your bolero!
Note: Although the design for this shrug is not entirely original, the crochet pattern is written
by me. It is free (like the knitted original) and should never be for sale. Therefore, do not
duplicate for commercial purposes. You may use this pattern for personal use only. Thank
you.
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 7/9
CROCHET INFO:
Replace first dc on every row with 3 ch.
PATTERN:
See diagram A.1 - NOTE: The first row with sc is not in the repetition and is NOT repeated
upwards.
--------------------------------------------------------
BOLERO:
Worked from mid back. First work one side and down to beg of sleeve, then work the other side
and down to the other sleeve. Then sew the sleeve seams and work 1 flounce around the entireopening.
FIRST SIDE:
Ch 82-90-98 LOOSELY with Cotton Viscose on hook size 3 mm / C – it is VERY important that
this ch-row is not too tight. Work 1 sc in 2nd ch from hook, then work 1 sc in every ch the
entire row = 81-89-97 sc. Continue pattern A.1 as follows: Diagram a over the first 9 sc,
diagram b until 8 sc remain, then diagram c over these (= 10-11-12 repetitions in total on row).
REMEMBER THE CROCHET GAUGE! Repeat the 4 rows in diagram A.1 upwards until piece
measures approx. 32-35-39 cm / 12½"-13 3/4"-15 1/4"'' – finish after 4th row in diagram.
Continue to work a finishing border as follows:
ROW 1: ch 4, 1 sc in first ch-space, * ch 4, 1 sc in next ch-space, ch 4, 1 sc in ch between the 4
dc, ch 4, 1 sc in next ch-space *, repeat from *-* the entire row, finish with ch 4, 1 sc in lastch-space, 3 ch and 1 sc in last dc, turn piece.
ROW 2: Work as follows in every ch-space: 1 sc + 1 picot (= ch 3, 1 sc in first ch) + 1 sc.
Fasten off.
SECOND SIDE:
Work along the other side of sc row made at the beg of first side (i.e. mid back) – beg with 1st
row in A.1 and work as first side.
ASSEMBLY:
Fold the bolero double across and sew tog from bottom of each sleeve and approx. 10 cm / 4''
up in each side – sew edge to edge to avoid a chunky seam.
FLOUNCE AROUND OPENING:Work around the entire opening as follows (beg mid back):
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 8/9
ROUND 1: 1 sc in first dc, * ch 3, 1 sc in next dc *, repeat from *-* the entire round, finish with
3 ch and 1 sl st in first sc.
ROUND 2: ch 2, 1 sc in first ch-space, * ch 4, 1 sc in next ch-space *, repeat from *-* the
entire round, finish with 1 sl st in first sc.
ROUND 3: ch 2, 1 sc in first ch-space, * ch 4, 1 sc in next ch-space *, repeat from *-* the
entire round, finish with 1 sl st in first sc.
ROUND 4: ch 2, 1 sc in first ch-space, * ch 5, 1 sc in next ch-space *, repeat from *-* theentire round, finish with 1 sl st in first sc.
ROUND 5: ch 2, 1 sc in first ch-space, * ch 5, 1 sc in next ch-space *, repeat from *-* the
entire round, finish with 1 sl st in first sc.
ROUND 6: Work as follows in every ch-space: 2 sc + 1 picot (= ch 3, 1 sc in first ch) + 2 sc.
Fasten off.
Diagram
= ch
= sc
= dc
= crochet direction
7/27/2019 Pattern for bolero.docx
http://slidepdf.com/reader/full/pattern-for-bolerodocx 9/9