pc board relays - 25 series

PC Board Relays

PRODUCT SPECIFICATIONS

Living Industrial Partnerships

25Series

PC Board Relays 8A

Overvoltage categoryIII, as per EN IEC 60947-5-1

R

PC Board Relays 8A


R

Specifications ............................................................................................................... 225/

Model Number Structure .................................................................................................25/3

Technical Data ..............................................................................................................25/1

Protection & Safety Precautions ..................................................................................... 625/

Model Number Selection & Dimensional Details ............................................................25/4

Accessories ...................................................................................................................25/5

25 Series PC Board Relays




PC Board Relays 8A


R

PC Board Relays 8A


R

WERNER`s 25 Series PC Board Relays are the product of your choice if your designs require SPDT or even

DPDT abilities but board space and available heights in your casings is very limited. The 25 Series products

are fully sealed for use in harsh surroundings.

25 Series PC Board Relays by WERNER offer you just the right products for those circuits where spaces is

ever precious. And the switching frequency in a little higher.

Features Overview

Highlights

? All models available for direct PC Board Mounting, PCB socket or Panel socket mounting

? All models designed applying MFMS design principles (Max Function Min Space)

? All models designed applying solid modeling and finite elements design methods

? All models available for use with 50 Hz and 60 Hz cycles

? 25 Series available as SPDT as well as DPDT

? 25 Series are fully sealed and provide a heights of only 16mm ? All models available in standard current ratings from 6V to 48V (DC)

? Available in SPST with up to 12 Ampere Continuous Load Current

? Available in SPDT with up to 8 Ampere Continuous Load Current

? All models provide Dielectric strength of 5.000V (AC)

PC Board Relays

Features:

PC Board Relays

Dielectric strength of 5,000V AC

Compact and small

Contact Capacity of 8A &12A

Only 16 mm heightSPDT & DPDT

ApprovalsApprobations and Declaration of conformity Overvoltage category

III, as per EN IEC 60947-5-1R

UL

CE

RoHS

CCC

Demko

S


±15% at 20°C

AC Coil Ratings

Voltage

Operation PropertiesCoil Resistance

(Ù)

Rated Current (mA)

AC 50HzAC 60Hz

Power Consumption (W)

AC 50HzAC 60Hz

12V

24V

110V

130% max.

80%max.

30%min.

6.3 76007.5

–

0.89

Continuous Voltage Pickup Voltage Dropout Voltage

50.7

25.35

59.5

29.75 350

0.82

0.88

0.79

0.69

0.76

Weight

Weight (approx.)

Model No. 25.21 (SPDT)

15g

25.22 (DPDT)

16g

DC Coil Ratings

Voltage

Operation PropertiesCoil Resistance

(Ù)Rated Current (mA) Power Consumption (W)

12V

24V

110V

130% max.

80%max.

30%min.

0.4

Continuous Voltage Pickup Voltage Dropout Voltage

4.1

33.3

16.7

360

1440

23,040

0.4

0.4

±15% at 20°C

PC Board Relays 8A


R

PC Board Relays 8A


R

25 Series PC Board Relays 25/1

PC Board Relays

Mechanical Durability

Shock Resistance

Vibration Resistance

Dielectric Strength

Contact Resistance

Operating Humidity

Insulation Resistance

Operating Temperature

Electrical Durability

Operate Time

10,000,000 operations minimum

Damage limits:

Operating extremes:

100m/s² (10G)

1,000m/s² (100G)

Damage limits:

Operating extremes:

10 to 55Hz, amplitude 1.5 mm

10 to 55Hz, amplitude 1.5 mm

Between contact and coil: 5,000V AC, 1 minute

Between contacts 1,000V AC, 1 minute

Specifications

100mÙ maximum at 5V DC, 1A

45% to 85% RH (No condensation)

100MÙ minimum

–35 to +85°C (No freezing)

–35 to +85°C (No freezing)

SPDT

DPDT

SPDT

DPDT

SPDT

SPDT

Operating Frequency

Contact Material

Release TimeDPDT

SPDT

–

–

–

–

–

–

–

–

12ms maximum at 20°C


100,000 operations minimum (120V AC, 10A)

Electrical: 2000 operations/hour maximum

Mechanical: 20,000 operations/hour maximum

Silver cadmium oxide



DPDT

–

No. of Poles

Voltage

A

250 V

12

250 V

8

2 Poles1 Pole

Socket Specification

Mounting

DIN Rail

PCB MountSocket

M3 screws - coil M3.5 screws - contact

–

75.12.0175.11.01

Model No.

1 Pole 2 PolesWire SizeTorque

75.12.0575.11.05WithSpring Clamp

With Finger-safe

75.2275.21–

Up to 3.5mm²(12AWG)

upto 1.5mm²

–

0.6 to 1.0 N.m

–

–

Terminal

PC Board

Terminal type


25 Series PC Board Relays25/2

Applicable Clips

Appearance Suitable For PCB Mount Socket

RelayDescription Suitable For DINMount Socket

Wire Spring 76.02.02– Suitable for all

WERNER’s 25 Series Relays

Suitable For Feed through Sockets

–

* For suitable relay please check Sockets catalogue

PC Board Relays 8A


R

Model Number Structure - PC Board Relays

Terminal Type

2 PC Board

Series

25 Series Relays

Number of Poles

SPDT

DPDT

1

2

25. 22. 01. 120

Types

Basic0



Voltage

012

024

110

12V

24V

110V

AC

DC

Coil

1

2

Basic

6V

12V

24V

110VPC Board

Basic

12V

24V

110V

PC Board

Model Number Selection

Appearance Terminal

TypeVoltageTypes

Model No.

AC

25.21.01.012

25.21.01.024

25.21.01.110

DPDT

SPDT

25.21(SPDT)

25.22 (DPDT)

SPDT DPDT

25.21.02.012

25.21.02.024

25.21.02.110

DC

25.22.01.006

25.22.01.012

25.22.01.024

25.22.01.110

25.22.02.006

25.22.02.012

25.22.02.024

25.22.02.110

PC Board Relays 8A


R

PC Board Relays 8A


R

PC Board Relays 8A


R

PC Board Relays 8A


R



Dimensions

DPDTSPDT

Internal Connection (Bottom View)

77.02.10 Aluminum 1000 mm 200 g

DIN Rail No. Material Length Weight Width

35 mm

77.02.10 31

1.7

12.5

5.5

35

25

7.5

DIN Rail35-mm-wide

77.02.10 31.00

10.50

25.18

35.00

41.00 51.00

3.8

0

12.501000

12.5

45

977.03.10

Mounting Clips

Mounting Clips No. Rails WeightWidth

77.03.10 77.02.10 15.2 g45 mm

Applicable Clips

Appearance Suitable For PCB Mount Socket

RelayDescription Suitable For DINMount Socket

Wire Spring 75.02.02– Suitable for all

WERNER’s 25 Series Relays

Suitable For Feed through Sockets

–

* For suitable relay please check Sockets catalogue



Accessories

DIN Rails

Replacement parts & Accessories

LM-AB Protection diode 6/230 VDC +A1 LM-FO Protection diode, LED & varistor 6/24 VAC/DC +A1 LM-FQ Protection diode, LED & varistor 110/230 VAC/DC +A1 LM-GR Varistor 24VAC LM-GS Varistor 115VAC LM-GT Varistor 230VAC

LM-AB Protection diode 6/230 VDC +A1 LM-FO Protection diode, LED & varistor 6/24 VAC/DC +A1LM-FQ Protection diode, LED & varistor 110/230 VAC/DC +A1LM-GR Varistor 24VACLM-GS Varistor 115VAC LM-GT Varistor 230VAC

Prevents

This protection circuit is very effective in arc suppression whenopening the contact however, the capacitor is charged while thecontacts are opened else the capacitor is discharged through thecontacts, increasing the possibility of contact welding.

This protection circuit is very effective in arc suppression whenopening the contact however, a current flows to charge the capacitor,causing contact welding when the contacts are closed.

Protection

When an inrush current flows through the load, the contact may become welded. The contact ratings show maximum values,Make sure that these values are not exceeded. Contact a contact protection circuit, such as a current limiting resistoras a optional solution.

This protection circuit can be used when the load impedance is smaller than theRC impedance in an AC load power circuit.R: Resistor of approximately the same resistance value as the loadC: 0.1 to 1 µF

This protection circuit can be used for both AC and DC load power circuits.R: Resistor of approximately the same resistance value as the loadC: 0.1 to 1 µF

This protection circuit can be used for DC load power circuits. Use a diode withthe following ratings.Reverse withstand voltage: Power voltage of the load circuit x 10Forward current: More than the load current.

Safety Precautions

Do not drop, shock or remove the relay cover to maintain the initial characteristics.The relay cover cannot be removed from the base during normal operation.Use the relay in environments free from dust, condensation, dioxide or hydrogen sulfide.

Make sure that the coil voltage does not exceed applicable coil voltage range.Prevent usage of relays in the vicinity of strong magnetic field, as that my cause in malfunctioning of relays.

Failure to turn off power before wiring, installation, removal andmaintenance may cause electrical shock or fire hazard.

Attention on specifications and rated values to prevent electrical shock or fire hazard.Use wires of the proper size to meet voltage and current requirements.

Tighten the terminal screws on the relay socket to the proper tightening torque.

Prevent using the check button as a switch.The durability of the check button is a minimum of 200 operations.It is advisable to apply a positive voltage to terminals of neighboring poles and a negative voltage to the other terminals of neighboringpoles when using DC loads on 4PDT relays to prevent the possibility of short circuits.

A soldering iron of 30 to 60W would be recommended when soldering the relay terminals and the preferredtime to complete soldering is within 4 seconds approximately.



Copyright © WERNER Electric. All Right Reserved.



WERNER shall not be responsible for conformity with any , codes or standards that apply to use of the products.WERNER shall provide applicable third party certification documents identifying ratings and limitations of use that apply to theproducts in case of the customer's request.

Prevent use of the products for an application involving risk to life or property. Be sure that the WERNER’s products are properly rated and installed for the overall system or equipment. WERNER shall not be responsible for the user's programming of a programmable products.

regulations

Application Considerations

WERNER shall practice to change type/model numbers when published ratings or features are changed, however some specifications and international certifications of the products may be changed without any notice.

When in doubt, please consult with your WERNER representative to confirm actual specifications & approvals on the products.

product specifications and accessories at any time based on improvements and other reasons.WERNER shall change

The information in this catalog has been carefully checked. However, WERNER take no responsibilities for clerical, typographical or proofreading errors.

All marks and symbols use for representation in catalogues belongs to the respective owners.

Please check with WERNER representative for the available marks.

Disclaimers

Warranty

's warranty represents that the products are free from defects in materials and workmanship for a period of one year.

WERNER shall not be responsible for any special loss of profit, commercial loss, indirect consequential damages relevant to products.

WERNER shall not be responsible for repair, warranty or any claims regarding the products unless WERNER’s Analysis conform that the products were properly stored, installed, handled, maintained and not a the results from accident, insufficient,abuse, misuse, natural disaster, improper installation excessive electrical supply, environmental conditions or abnormal mechanical.

WERNER

or

Terms And Conditions

Please read this catalog before purchasing any products. Please consult your WERNER representative for any clarifications or comments.

Product specifications are subject to change without notice.

Thank you for choosing WERNER products.E l e c t r I c Inventing Innovation

Werner Electric India (P) Ltd.No. 38, Hunsur RoadMysore 570012.T : +91 821-425 4500F : +91 821-425 4599E : [email protected]: www.wernerelectric.de

pc board relays - 25 series

Business

series available

ac25 series pc board

series voltage

series productsare

series relays012

board space

direct pc board mounting

models available