pc220lc-6 net horsepower 158 hp operating weight · 2018. 1. 25. · the avance cab interior is...

PC220LC-6

PC220LC-6

NET HORSEPOWER

118 kW 158 HP

OPERATING WEIGHT

23915 - 26074 kg

52,724 - 57,483 lb

HY

DR

AU

LIC

EX

CA

VA

TO

R

The Avance cab interior is spacious and provides a comfortable working environment.

Net Horsepower:118 kW 158 HP @ 2,100 RPM

Operating Weight:23915 - 26074 kg52,724 - 57,483 lb

Bucket Capacity:0.47 - 1.34 m3

0.62 - 1.75 yd3

1. ADJUSTABLEMONITOR

2. STARTERSWITCH

3. FUEL CONTROLDIAL

4. INCLINEDDASHBOARD

5. ADJUSTABLEARMRESTS

6. OPTIONAL AIRCONDITIONING

7. FULLY ADJUST-ABLE SEAT

8. HOT / COLDSTORAGECOMPARTMENTS

9. LOW EFFORTJOYSTICKS

10. OPERATORWEIGHTADJUSTMENT

7

8

9

10

1

4

2

3

5

6

1. ADJUSTABLEMONITOR

2. STARTERSWITCH

3. FUEL CONTROLDIAL

4. INCLINEDDASHBOARD

5. ADJUSTABLEARMRESTS

6. OPTIONAL AIRCONDITIONING

7. FULLY ADJUST-ABLE SEAT

8. HOT / COLDSTORAGECOMPARTMENTS

9. LOW EFFORTJOYSTICKS

10. OPERATORWEIGHTADJUSTMENT2

MULTI-POSITION CONTROLSThe multiple position, pressure propor-

tional control levers allow the operator to

work in comfort while maintaining precise

control.

A double slide mechanism allows the seat

and controllers to move together or

independently, allowing the operator to

position the controllers for maximum

productivity and comfort.

The multi-position diagnostic monitor is

easily reached and can be rotated to

remove glare. Plus, the inclined dash-

board makes the switches and fuel control

dials easier to view and use.

CAB MOUNTSThe cab rests on viscous damping mounts to reduce vibra-

tion and noise from the machine body. Operator fatigue

is reduced.

NOISEThe noise levels at the operator’s ear have been decreased

by improving the cab mounts. In addition, a mixed-flow fan

reduces fan speed and channels air around the engine,

reducing noise.

Floor

Revolving Frame

Rubber

Silicon Oil

Cab Mounts

3

PC220LC-6HYDRAULIC EXCAVATOR

Time Display mode is the defaultmode and shows the time and hour

meter reading.

The User Code Display modedisplays a trouble code and

sounds an alarm when a

problem has been detected.

The Trouble Data Memorymode monitors 32 separate

items and stores up to 20

abnormalities over 999 hours

for effective troubleshooting.

The Operation Data modemonitors 20 separate current

operating conditions including system

pressure and rpms to keep your machine

operating at peak performance. In

addition, 44-bit patterns allow you to

diagnose electrical connections.

Together these modes allow youto troubleshoot 119 differentproblems to minimize downtime.

Working Mode

Power Up/Speed Down

Travel Speeds

Self-Diagnostic System …The PC220 features the most advanceddiagnostic system in the industry. Komatsu’sexclusive system identifies 119 items, reducesdiagnostic time, and helps you maintainmaximum production. The LCD portion of themonitor has four different display modes thataid in identifying potential problems beforethey become major problems:

WORKING MODE SELECTIONThe Avance excavator is equipped with five working modes. Each mode is

designed to match engine speed, pump speed, and system pressure with

the current application.

Working Mode Application Advantage

• Max. Production/PowerH/O Heavy-Duty • Fast Cycle Times

• Power Up/Speed Down Available

• Good Cycle TimesG/O General • Good Fuel Economy

• Power Up/Speed Down Available

F/O Finishing • Smooth Finishing Capability• Arm in 1/2 Speed

L/O Lifting • Powerful Lifting• Power Max. Pressure

100% of the Time• Reduced Speed• Precision Control

B/O Breaker • Optimum Engine RPM, HydraulicOperations Flow and Pressure

POWER UP/SPEED DOWN SWITCH*A button on top of the left joystick provides an instant

burst of power at either full speed or half speed

depending on the selection made on the monitor.

*Available in H/O and G/O mode only.

Selection Application Result

Power Up Tough Digging Increase implement force Operations by 9% for 8.5 seconds.

Speed Down Delicate Speed is reduced by 1/2. Operations Increase implement force

by 9% as long as joystick button is pressed.

Active mode

Diagnostic Display Modes:

The Active mode increases engine speed,pump flow, and boom down speed to improveproductivity up to 10%. Under light loads,equipment speed is faster. When under heavyloads it is possible to detect engine speed.

4

●

●

●

●


HydrauMind allows the load-sensing and

pressure compensating valves to auto-

matically adjust to individual work

applications. Adjustments are sensed by the

valves. Electronic controls maximize the

engine horsepower so full horsepower is

available at all times.

FOR EXAMPLE …when the ground condition

changes while digging, you don’t have to

think about changing lever strokes because

HydrauMind instantly, silently, and auto-

matically sends just the right amount of oil to

the actuators at just the right pressure to

accommodate the change.

When you move the boom, arm, and bucket

at the same time, all the equipment works

naturally, with the optimum combination of

speed and power as if it were a human

hand.

HydrauMind also makes it easy to change

or add valves and work equipment.

Power, versatility,maneuverability, controllability—you name it. Never has there been an excavator so easy to operate, sonatural, so intuitive, so responsive.

ENGINEThe new Komatsu SA6D102E-1 meets emission regulations,

including CARB. New hydraulic pumps produce the same power as

in the previous model at reduced engine speed. The new engine

provides improved emissions without sacrificing valuable hydraulic

power. Also, noise levels are reduced for improved operator comfort.

IN-LINE FILTRATIONThe PC220 has a cool-running hydraulic system with the most

extensive filtration system available. It uses a new high-performance

filter glass for improved cleanliness and extended replacement

interval. The wide variety of attachments available today means

you put more stress on your excavator than ever before.

Komatsu provides the extra protection for your machine

by providing a high-pressure in-line filter as standard

equipment.

5

Advanced Monitor Features

• Self-diagnosis of 119different problems.

• 5 working modes asstandard, includingbreaker mode formaximum productivity

• Active-mode forincreased implementspeed.

Windshield Wiperis mounted to thecab for better visi-bility and easierwindow opening.

Komatsu distributorsoffer a wide variety ofattachments that takeadvantage of the PC220’sexceptional versatility.

One-piece top andbottom plates for boththe boom and armprovide maximumstrength.

PC220LC-6

Cushioned cylindersminimize shock.

Since its originalintroduction, the PC220 has set new standards

for productivity and control.

The improved PC220 intro-

duces several new features

to provide the operator with

a faster, quieter, and easier-

to-service machine. Combine

these features with outstand-

ing resale value, and you will

know why over 90% of our

customers gave an “excellent”

rating for our excavator

design and technology.

6

Cast steel isused for criticalparts on both theboom and armfor increaseddurability.

Large undercarriage is sealed for maximumdurability.

Emissionized engine,at 158 hp, it is one of themost powerful in its class.

Three-speedmotor providessmooth andefficient job site travel.

Protected Hydraulic Circuit The cool-running hydraulic system is protected with the most extensive filtration system available,including a high pressure in-line filter.

Comfortable CabKomatsu’s low-noisecab design uses viscouscab mounts for reducednoise and vibration.

Large boomcylinders provide maximum liftcapacity.

Komatsu offers over 20 different

excavator models.

Komatsu offers over 20 different

excavator models.

7

High pressurehydraulic systemhelps provide fastcycle times.

SWING SYSTEM

Driven by . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic motorSwing reduction . . . . . . . . . . . . . Planetary double reductionSwing circle lubrication. . . . . . . . . . . . . . . . . Grease-bathedSwing lock . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brakeSwing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4 RPMSwing torque . . . . . . . . . . . . . . . . . 6427 kg.m 46,468 ft lbs

UNDERCARRIAGE

Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frameTrack frame. . . . . . . . . . . . . . . . . . . . . . . . Box-section typeSeal of track . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed trackTrack adjuster. . . . . . . . . . . . . . . . . . . . . . . . Hydraulic typeNo. of shoes . . . . . . . . . . . . . . . . . . . . . . . . . . 51 each side No. of carrier rollers . . . . . . . . . . . . . . . . . . . . . 2 each sideNo. of track rollers. . . . . . . . . . . . . . . . . . . . . . 10 each side

COOLANT AND LUBRICANT

CAPACITY (REFILLING)

Fuel tank. . . . . . . . . . . . . . . . . . . . . 340 ltr. 89.8 U.S. galRadiator . . . . . . . . . . . . . . . . . . . . . 23.3 ltr. 6.2 U.S. galEngine . . . . . . . . . . . . . . . . . . . . . . 24.0 ltr. 6.3 U.S. galFinal drive, each side . . . . . . . . . . . . 4.2 ltr. 1.1 U.S. galSwing drive . . . . . . . . . . . . . . . . . . . 5.5 ltr. 1.5 U.S. galHydraulic tank . . . . . . . . . . . . . . . . 166 ltr. 43.9 U.S. gal

OPERATING WEIGHT

(APPROXIMATE)

Operating weight, including 5850 mm 19'2" one-pieceboom, 3045 mm 10'0" arm, SAE heaped 1.15 m3 1.50 yd3back-hoe bucket, operator, lubricant, coolant, full fuel tank,and the standard equipment.

8

ENGINE

Model . . . . . . . . . . . . . . . . . . . . . . . Komatsu SA6D102E-1Type. . . . . . . . . . . . . . 4 cycle, water-cooled, direct-injectionAspiration . . . . . . . . . . . . . . . Turbocharged and aftercooledNo. of cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 mm 4.02"Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mm 4.72"Piston displacement . . . . . . . . . . . . . . . . . . 5.88 ltr. 359 in3Rated gross horsepower:

128 kW 166 HP at 2100 RPM (SAE J1349)Flywheel horsepower:

118 kW 158 HP at 2100 RPM (SAE J1349)Governor . . . . . . . . . . . . . . . . . . . . . All-speed, mechanical

HYDRAULIC SYSTEM

Type . . . . . . . . . . . . . . . HydrauMind (Hydraulic MechanicalIntelligence New Design) system

Closed-center system with load-sensing valves and pressure-compensated valves.

No. of selectable working modes. . . . . . . . . . . . . . . . . . . . 5Main pump:

Type . . . . . . . . . . . . Variable-displacement piston pumpsPumps for. . . . . . . . . . . . . . . Boom, arm, bucket, swing,

and travel circuitsMaximum flow . . . . . . . . . . . 2 x 226 ltr./min. 2 x 59.7 gpmHydraulic motors:

Travel . . . . . . . . . . . . . . . . . . . . . . 2 x Axial piston motorwith parking brake

Swing . . . . . . . . . . . . . . . . . . . . . . 1 x Axial piston motor with swing holding brake

Relief valve setting:Implement circuits . . . . . . . . . . . 325 kg/cm2 4,620 PSITravel circuit . . . . . . . . . . . . . . . 355 kg/cm2 5,050 PSISwing circuit . . . . . . . . . . . . . . . 280 kg/cm2 3,980 PSIPilot circuit. . . . . . . . . . . . . . . . . . 38 kg/cm2 540 PSIService valve . . . . . . . . . . up to 295 kg/cm2 4,190 PSI

Hydraulic cylinders:Number of cylinders – bore x strokeBoom . . . . . . . . . 2 – 140 mm x 1285 mm 5.5" x 50.5"Arm . . . . . . . . . . 1 – 140 mm x 1635 mm 5.5" x 64.4"Bucket . . . . . . . . 1 – 130 mm x 1020 mm 5.1" x 40.2"

Service valves maximum flow:First valve . . . . . . . . . . . . . . . . . . . 452 ltr./min. 119 gpmSecond valve . . . . . . . . . . . . . . . . ltr./min. 59.7 gpm 226 Third valve . . . . . . . . . . . . . . . . . . 226 ltr./min. 59.7 gpm

DRIVES AND BRAKES

Steering control . . . . . . . . . . . . . . . . Two levers with pedalsDrive method . . . . . . . . . . . . . . . . . . . Fully hydrostatic typeTravel motor. . . . . . . . . . . . . . . . . . . . . . Axial piston motor,

in-shoe designReduction system . . . . . . . . . . . Planetary double reductionMax. drawbar pull . . . . . . . . . . . . . . . . . 17700 kg 39,020 lbGradability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%Max. travel speed (High) . . . . . . . . . . . . . 5.5 km/h 3.4 MPHMax. travel speed (Mid). . . . . . . . . . . . . . 4.1 km/h 2.6 MPHMax. travel speed (Low) . . . . . . . . . . . . . 3.0 km/h 1.9 MPHService brake. . . . . . . . . . . . . . . . . . . . . Hydraulic lock typeParking brake . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brake

Triple-Grouser PC220LC-6Shoes Operating Weight Ground Pressure

600 mm 23915 kg 0.48 kg/cm2

23.6" 52,724 lb 6.85 PSI700 mm 24206 kg 0.42 kg/cm2

27.6" 53,364 lb 5.89 PSI800 mm 25784 kg 0.38 kg/cm2

31.5" 56,844 lb 5.42 PSIMaximum 26074 kg 0.39 kg/cm2

Weight 57,483 lb 5.48 PSI

Arm Length Weight Adjustments2000 mm 6'7" (20) kg (44) lb2500 mm 8'2" (50) kg (110) lb3500 mm 11'6" 108 kg 238 lb

HD Boom5850 mm 19'2" 40 kg 88 lb

Maximum weight also includes: 5850 mm 19'2" HD boom,3500 mm 11'6" arm, and 0.96 m3 1.25 yd3 HD bucket.

2.0 m arm 6'7" 2.5 m arm 8'2" 3.0 m arm 10'0" 3.5 m arm 11'6"A Overall length 9780 mm 32'1" 9840 mm 32'3" 9780 mm 32'1" 9800 mm 32'2"B Length on ground (transport) 6610 mm 21'8" 6160 mm 20'3" 5390 mm 17'8" 5120 mm 16'10"C Overall height (to top of boom) 3125 mm 10'3" 3280 mm 10'9" 3160 mm 10'4" 3275 mm 10'9"D Overall width 3280 mm 10'9"E Overall height (to top of cab) 2905 mm 9'6"F Ground clearance, counterweight 1085 mm 3'7"G Min. ground clearance 440 mm 1'5"H Tail swing radius 2860 mm 9'5"I Length of track on ground 3830 mm 12'7"J Track length 4640 mm 15'3"K Track gauge 2580 mm 8'6"L Width of crawler 3280 mm 10'9"M Shoe width 700 mm 28"N Grouser height 26 mm 1"O Machine cab height 2020 mm 6'8"P Upper structure width 2710 mm 8'11"Q Distance, swing center to rear end 2850 mm 9'4"

2.0 m arm 6'7" 2.5 m arm 8'2" 3.0 m arm 10'0" 3.5 m arm 11'6"A Max. digging height 9070 mm 29'9" 9150 mm 30'0" 9380 mm 30'9" 9620 mm 31'7" B Max. dumping height 6120 mm 20'1" 6215 mm 20'5" 6515 mm 21'5" 6720 mm 22'1"C Max. digging depth 5720 mm 18'9" 6220 mm 20'5" 6770 mm 22'3" 7220 mm 23'8"D Max. vertical wall 4965 mm 16'3" 5455 mm 17'11" 6005 mm 19'8" 6455 mm 21'2"

digging depthE Max. digging depth 5550 mm 18'3" 6170 mm 20'3" 6440 mm 21'2" 7210 mm 23'8"

of cut for 8' levelF Max. digging reach 9285 mm 30'6" 9655 mm 31'8" 10180 mm 33'5" 10625 mm 34'10"G Max. digging reach 9090 mm 29'10" 9470 mm 31'1" 10000 mm 32'10" 10460 mm 34'4"

at groundH Min. swing radius 3950 mm 13'0" 3925 mm 12'11" 3860 mm 12'8" 3890 mm 12'9"Bucket digging force✩ 16700 kg* 14500 kg 14500 kg 14500 kg

36,820 lb* 31,970 lb 31,970 lb 31,970 lbArm crowd force✩ 14700 kg 13600 kg 11900 kg 10300 kg

32,410 lb 29,980 lb 26,230 lb 22,710 lb

✩ At power max *Optional bucket cylinder is required

DIMENSIONS

WORKING RANGE & BUCKET/ARM COMBINATION

BACKHOE BUCKET AND ARM COMBINATION

9

V – Used with weights up to 3,500 lb/yd3, W – Used with weights up to 3,000 lb/yd3

X – Used with weights up to 2,500 lb/yd3, Y – Used with weights up to 2,000 lb/yd3, Z – Not useable

Bucket Arms

Bucket NumberType Capacity OLW Weight of Teeth Tooth Size 6'7" 8'2" 10'0" 11'6"

0.54 m3 0.70 yd3 610 mm 24" 732 kg 1,614 lb 3 X330 V V V VKomatsu 0.72 m3 0.94 yd3 762 mm 30" 845 kg 1,862 lb 4 X330 V V V V

“H” Series 0.90 m3 1.18 yd3 914 mm 36" 912 kg 2,011 lb 4 X330 V V V VHD 1.09 m3 1.43 yd3 1067 mm 42" 1019 kg 2,247 lb 5 X330 V V V W

1.28 m3 1.67 yd3 1219 mm 48" 1092 kg 2,407 lb 6 X330 V V W X

0.48 m3 0.63 yd3 610 mm 24" 770 kg 1,698 lb 3 X330 V V V VKomatsu 0.67 m3 0.87 yd3 762 mm 30" 890 kg 1,963 lb 4 X330 V V V V

“H” Series 0.85 m3 1.11 yd3 914 mm 36" 969 kg 2,137 lb 4 X330 V V V VSD 1.03 m3 1.35 yd3 1067 mm 42" 1078 kg 2,377 lb 5 X330 V V V W

1.22 m3 1.60 yd3 1219 mm 48" 1188 kg 1,619 lb 6 X330 V V W X


Arm: 2500 mm 8'2" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' MAX.

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs7.6 m *5100 *5100 *4650 *4650

25' *11,300 *11,300 *10,300 *10,3006.1 m *5250 *5250 *4400 4150

20' *11,600 *11,600 *9,700 9,1004.6 m *6100 5700 *5900 3850 *4400 3450

15' *13,400 12,600 *13,000 8,400 *9,700 7,6003.0 m *9450 8550 *7350 5400 5900 3700 *4650 3100

10' *20,800 18,000 *16,200 11,900 13,000 8,200 *10,200 6,8001.5 m *12000 7950 8300 5100 5750 3600 4800 2950

5' *26,600 17,500 18,300 11,300 12,700 7,900 10,600 6,6000.0 m 13100 7600 8050 4900 5650 3450 4950 3050

0' 28,900 16,700 17,800 10,800 12,800 7,800 10,900 6,700–1.5 m *11500 *11500 12950 7500 7950 4800 5600 3450 5450 3360

–5' *25,400 *25,400 28,300 16,500 17,600 10,600 12,400 7,800 12,000 7,400–3.0 m *12400 *12400 *18700 15400 13060 7550 8000 4850 6600 4060

–10' *27,300 *27,300 *41,200 34,000 28,800 16,700 17,600 10,700 14,600 8,900–4.6 m *17700 15900 *12200 7850 9800 5950

–15' *39,000 35,000 *26,900 17,300 21,600 13,100


B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs7.6 m *4850 *4850

25' *10,700 *10,7006.1 m *5900 5700 *4500 *4500

20' *13,000 12,600 *10,000 *10,0004.6 m *7650 *7650 *6600 5550 *4550 3700 *4600 3700

15' *16,800 *16,900 *14,600 12,200 *10,100 8,200 *9,900 8,1003.0 m *10260 8250 *7800 5250 5800 3600 *4700 3300

10' *22,700 18,200 *17,200 11,600 12,800 8,000 *10,400 7,9001.5 m *12600 7700 8150 5000 5700 3500 *5150 3150

5' *27,800 16,900 18,000 11,000 12,500 7,700 *11,300 7,0000.0 m 12900 7400 7950 4800 5800 3400 5300 3250

0' 28,400 16,400 17,500 10,500 12,800 7,600 11,700 7,200–1.5 m *11950 11950 12850 7400 7900 4760 5850 3600

–5' *26,300 26,300 28,400 16,300 17,400 10,600 13,100 8,000–3.0 m *19300 15400 13050 7550 8000 4850 7450 4550

–10' *42,600 33,900 28,800 16,600 17,700 10,700 18,400 10,000–4.6 m *10950 7950

–15' *24,100 17,500

*Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.



B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs7.6 m *2900 *2900

25' *6,400 *6,4006.1 m *3900 *3900 *2750 *2750

20' *8,600 *8,600 *6,100 *6,1004.6 m *5400 *5400 *5350 3900 *2750 *2750

15' *11,900 *11,900 *11,800 8,600 *6,100 *6,1003.0 m *13050 *13050 *8400 *8400 *6750 5500 5950 3760 *2900 2800

10' *28,800 *28,800 *18,500 *18,500 *14,900 12,100 13,200 8,300 *6,400 6,1001.5 m *11150 8150 *8200 5200 5800 3600 *3150 2700

5' *24,600 17,800 *18,100 11,500 12,800 8,000 *6,900 6,0000.0 m *7200 *7200 *13150 7700 8100 4950 5650 3500 *3550 2700

0' *15,900 *15,900 *28,000 17,000 17,900 10,900 12,500 7,700 *7,900 6,000–1.5 m *6350 *6350 *10600 *10600 13000 7500 7950 4800 5600 3400 *4300 2950

–5' *14,000 *14,000 *23,400 *23,400 28,700 16,600 17,500 10,600 12,300 7,500 *9,500 6,500–3.0 m *10300 *10300 *15550 15300 13000 7600 7950 4800 5700 3600

–10' *22,700 *22,700 *34,500 33,700 28,700 16,800 17,500 10,500 12,600 7,900–4.6 m *19150 15700 *13060 7700 8100 4950 7750 4750

–15' *42,200 34,600 *28,800 17,000 17,900 10,900 17,100 10,600


Equipment:• Boom: 5850 mm 19'2"• Bucket: 0.96 m3 1.25 yd3• Shoes: 800 mm 31.5"• Lifting Mode

A: Reach from swing centerB: Bucket hook heightC: Lifting capacityCf: Rating over frontCs: Rating over side

: Rating at maximum reach

LIFTING CAPACITY

10

Arm: 3500 mm 11'6" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' MAX.

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs7.6 m *2400 *2400

25' *5,300 *5,3006.1 m *3950 *3950 *2300 *2300

20' *8,700 *8,700 *5,000 *5,0004.6 m *4860 3950 *2300 *2300

15' *10,700 8,700 *5,000 *5,0003.0 m *7400 *7400 *6150 5600 *5600 3800 *3250 2700 *2400 *2400

10' *16,300 *16,300 *13,600 12,300 *12,300 8,400 *7,100 5,900 *5,300 *5,3001.5 m *9250 *9250 *10300 8250 *7700 5250 5800 3650 *3850 2600 *2600 2450

5' *20,400 *20,400 *22,700 18,200 *16,900 11,600 12,800 8,000 *8,500 5,800 *5,700 5,4000.0 m *7950 *7950 *12550 7750 8150 4950 5650 3500 *3500 2550 *2950 2500

0' *17,500 *17,500 *27,700 17,100 17,900 10,900 12,600 7,700 *7,700 5,600 *6,500 5,500–1.5 m *5950 *5950 *10300 *10300 13000 7600 7900 4800 5550 3400 *3560 2700

–5' *13,100 *22,700 *22,700 *22,700 *28,800 16,800 17,400 10,500 12,200 7,500 *7,800 5,800–3.0 m *9250 *9250 *14300 *14900 12900 7450 7900 4750 5550 7,400 *4600 3100

–10' *20,400 *20,400 *31,500 *32,800 28,500 16,400 17,400 10,500 12,200 3350 *10,100 6,900–4.6 m *13400 *13400 *20050 15450 13100 7550 8000 4850 6650 4050

–15' *29,500 *29,500 *44,200 34,000 28,800 16,700 17,600 10,700 14,700 9,000


STANDARD EQUIPMENT

OPTIONAL EQUIPMENT

• Air cleaner, double element• Alternator, 50A• A/M–F/M Radio• Auto de-airation system for fuel line• Auto-deceleration• Auto engine warm-up• Batteries, 2x12V/170Ah• Boom holding valve• Cab which includes: antenna;

ashtray; cigarette lighter; floor mat;front windshield wiper and washer;luggage and magazine box; seat,

fully adjustable with suspension,double slide mechanism and seatbelt; window guard (RH)

• Counterweight, 4880 kg 10,760 lb• Dustproof net for radiator• Electronic monitor• Engine overheat prevention• Fuel tank sight gauge protection• Heater/defroster, 9930 kcal

39,400 BTU• Hinged oil cooler• In-line filter

• Power maximizing system• Pump/engine room partition cover• Rear view mirror (RH & LH)• Shoes, 700 mm, 27.6" triple grouser• Speed-down system• Starting motor, 5.5 kW• Travel alarm• Turbocharger cover• Working mode selection

• Air conditioner with heater, 5040 kcal 20,000 BTU, fresh airtype, includes cool and hot box

• Arm– 2000 mm 6'8"– 2000 mm 6'8" with piping– 2500 mm 8'2"– 2500 mm 8'2" with piping– 3045 mm 10'0"– 3045 mm 10'0" with piping– 3500 mm 11'6"– 3500 mm 11'6" with piping

• Arm holding valve• Boom, one piece

– 5850 mm 19'2"– 5850 mm, 19'2" heavy-duty

with piping• Fuel refill pump• Hydraulic control unit

– 1 additional actuator– 2 additional actuators– 3 additional actuators

• Shoes, triple grouser– 600 mm 23.6"– 700 mm 29.6"– 800 mm 31.5"

• Swing-back reducing valve• Track roller guards, full length• Tropic/high altitude spec• Under cover for track frame center

11


Komatsu America International Company440 N. Fairway Dr., Vernon Hills, IL 60061

AESS429-02 Printed in USA DK 02(3M)C DataKom 02/02 (EV-2)

www.KomatsuAmerica.com Materials and specifications are subject to change without noticeis a trademark of Komatsu Ltd. Japan

Finance Through its finance company,Komatsu can offer you a wide variety of

financing alternatives designed to meet your

needs. Programs include municipal leases for

governmental agencies, conditional sales

contracts, and leases with $1 purchase

options for customers interested in owning

their equipment.

Ask your distributor about Komatsu

leasing. We offer finance and

operating leases and the unique

Advantage Lease which

offers you predetermined

purchase, return, and

renewal options.

Parts Three computer-linked parts distributioncenters provide fast access to anywhere in the

U.S. and Canada. Most parts are available

overnight. Plus, Komatsu distributors keep

a large assortment of commonly used parts

in stock for immediate access.

Remanufactured parts Save money and still have the same warranty as new

parts at a fraction of the cost with like-new

remanufactured parts.

Maintenance Take advantage of theexperience we have gained and ask your

distributor about our factory-supported

programs including: regular scheduled main-

tenance, oil and wear analysis, diagnostic

inspections, undercarriage inspections, training,

special service tools, parts programs, and

even a special software program to help your

distributor keep track of and manage service-

related data.

SUPPORT

Count on Komatsu and your local distributor for

the support you deserve. Our success depends

on satisfying your need for productive equipment

and supporting that equipment. That’s why we

have one of the largest and strongest heavy-

equipment distributor organizations in North

America. Their personnel are not only trained

to help you select the equipment that is best-

matched for your business but to support

that equipment.

pc220lc-6 net horsepower 158 hp operating weight · 2018. 1. 25. · the avance cab interior is...

Documents