pcb routers - ind-sphinxindsphinx.com/wp-content/uploads/2017/12/pcb-routers.pdf · 0.40 0.60 0.80...

PACKINGADVANTAGESAPPLICATION

w w w . i n d s p h i n x . c o m+91 1792 232860 / [email protected]

Routing of aluminium

Routing of IMS/metal PCB / Heat sink PCBs.

Longer tool life

Better finish

No pre drilling

SCAN TO ORDER

d lD : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm

10 tools per pack.50 tools per pack.

2F ALUMINIUM ROUTER

1.60

2.40

8.00

9.00 -

Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end.

RECOMMENDED PARAMETERS FOR ROUTING ALUMINIUM PCB

DIAMETER mm

1.60

2.00

SPINDLE SPEEDRPM

40000

32000

CHIP LOADmicron m/min

ROUTING DEPTHm/min mm

5.0 - 7.0

9.0 -15.0

0.2 - 0.3

0.3 - 0.5

1.2

1.2

2.00

2.50

1.0

1.0

2.40 28000 14.0 - 21.0 0.4 - 0.6 1.2 3.00 1.0

X-Y TABLE FEED Z-FEED RATE DEPTH IN TO BACK UP

P024

On request : Inch sizes / Special dimensions

: Non stock items / Articles

PCBIMS

2.00 9.00 -

-

3.00 10.00 -

3.00 23000 26.0 - 35.0 0.6 - 0.8 1.2 3.00 1.0

Also available

DLCCOAT

ØD

l38.00

ød

mm mm


For routing of all standard PCBs with aggressive feed rates on rugged spindles.

Long life and excellent performance under good vacuum conditions.

SCAN TO ORDER


1.201.30*1.40*1.501.601.70*1.802.002.402.50*

0.800.90*1.00

0.60* 3.000.50* 3.00

5.005.005.008.008.008.008.008.008.008.00

5.005.005.00

------9.50*9.50*10.50*10.50

---

1.10 5.00* 7.00

PATTERNDIAMOND



SPINDLE SPEEDRPM

RECOMMENDED PARAMETERS FOR ROUTING FR4

DIAMETER mm

1.001.201.301.401.501.601.701.802.002.40

0.600.800.90

50000500004700043000400003800036000340003000035000

700007000070000

X-Y TABLE SPEEDm/min

0.4 - 0.60.5 - 0.70.5 - 0.70.5 - 0.70.6 - 0.80.6 - 0.80.7 - 1.00.7 - 1.01.0 - 1.41.4 - 1.6

< 0.2< 0.4< 0.4

Z-FEED RATEm/min

0.40.40.50.50.50.50.50.50.50.5

0.20.20.2

UPCUT POINT

DRILLArticleP661*

FISHTAILUPCUTArticle

P660


HIGH FEED DIAMOND CUT ROUTER

ØDØd

l38.00

P660P661

On request : Inch sizes / Special dimesions


mm mm


UPCUTDOWNCUT

FISHTAIL


Diamond patterned standard router used for routing outer contours in PCBs.

Long life and excellent performance under efficient vacuum conditions.

SCAN TO ORDER


1.201.30*1.40*1.50 / 1.601.802.002.10* / 2.20*2.30*2.402.50*

0.80* / 0.90*1.001.10*

2.60* / 2.80*2.90*

3.175*3.00*

0.70*

5.005.005.008.508.509.009.009.009.009.00

5.005.005.00

9.009.009.009.00

PATTERNDIAMOND



SPINDLE SPEEDRPM


DIAMETER mm

1.001.201.301.401.501.601.701.802.002.40

0.800.90

2.503.003.175

50000500004700043000400003800036000340003000025000

7000070000

240002000020000


0.4 - 0.60.5 - 0.70.5 - 0.70.5 - 0.70.6 - 0.80.6 - 0.80.7 - 1.00.7 - 1.01.0 - 1.41.0 - 1.4

< 0.4< 0.4

1.0 - 1.41.0 - 1.31.0 - 1.3

Z-FEED RATEm/min

0.40.40.50.50.50.50.50.50.50.5

0.20.2

0.50.50.5

ArticleP627*


P626

DIAMOND CUT ROUTER P626P627

7.007.007.00--10.5010.50*10.50*10.5010.50

7.007.007.00

--10.5010.50

mm mm



ØDØd

l38.00

5.00 -

UPCUTUPCUT



Spiral patterened standard router used for routing outer contours and inner contours of PCBs.

Routing of inner slotting in the PCBs.

Smooth edge finish .

Good dimensional control because of efficient chip evacuation.

SCAN TO ORDER




SPINDLE SPEEDRPM


DIAMETER mm

70000580005400050000460004300041000390003500029000

7000070000

7000070000


0.4 - 0.60.5 - 0.70.5 - 0.70.5 - 0.70.6 - 0.80.6 - 0.80.7 - 1.00.7 - 1.01.0 - 1.41.0 - 1.4

< 0.3< 0.4

< 0.1< 0.2

Z-FEED RATEm/min

0.40.40.50.50.50.50.50.50.50.5

0.20.2

0.20.2

ArticleP727*LHRC

ArticleP726

BREAKERCHIP

2800023000

1.0 - 1.41.0 - 1.3

0.50.5

22000

1.001.201.301.401.501.601.701.802.002.40

0.600.80

0.400.50

2.503.003.175 1.0 - 1.3 0.5

2.402.50* - 2.90*3.003.175*

9.00

5.005.005.005.005.008.508.508.509.00

4.005.00

2.003.00

9.009.009.00

6.007.007.007.007.00----

5.006.00

-4.00

---

- -

7.00*8.50*8.50*8.50*8.50*----

-7.00*

--

---

DOWNCUT

FISHTAILFISHTAIL FISHTAILUPCUTArticle

P724*LHLC

UPCUTArticle

P729*POINTDRILL

CHIP BREAKER ROUTER P726P727

P724P729

0.90

1.10*1.201.30* - 1.40*1.50*1.601.70* - 1.90*2.00

0.70*0.80

0.40*0.50* - 0.60*

1.00

mm mm



l38.00

Ød ØD

2.10* 9.00 - -

l38.00

Ød ØD

BREAKERCHIP


Spiral patterened standard router used for routing outer contours and inner contours PCBs.Routing of inner slotting in the PCBs.

Smooth edge finish.

Good dimensional control because of efficient chip evacuation.

SCAN TO ORDER


0.40*0.50*0.60

2.503.003.00




SPINDLE SPEED

70000700007000070000580005400050000460004300041000

1190009500080000

39000350002900028000

X-Y TABLE SPEED

0.3 - 0.40.3 - 0.40.3 - 0.40.4 - 0.60.5 - 0.70.5 - 0.70.5 - 0.70.6 - 0.80.6 - 0.80.7 - 1.0

< 0.2< 0.3< 0.3

0.7 - 1.01.0 - 1.41.0 - 1.41.0 - 1.4

Z-FEED RATE (m/min)

0.5

0.40.40.40.50.50.5

0.20.20.20.2

0.20.20.2

0.50.50.5

FISHTAILArticleP732

HIGH PERFORMANCE CHIP BREAKER ROUTER P732

DIAMETER

0.700.800.901.001.201.301.401.501.601.70

0.400.500.60

1.802.002.402.50

0.40.40.40.4

0.40.40.4

1.01.01.01.0

0.80.80.8

1.21.21.4

Without Pre-Drilling With Drillingm/minRPMmm

UPCUT



mm mm


---

1.00

1.201.30* / 1.40*1.501.601.802.002.402.503.003.175

-0.80 5.00

5.00

5.005.006.007.507.507.508.508.508.50*8.50*

-

7.00*---------

-0.90* 5.00

-1.10* 5.00

0.400.600.801.001.201.602.002.403.003.175

101834445355

2468

101834445355

2468

46810122240526466

46810142535404550

1-21-2235812151820

46810142535404550

1-21-2235812151820

46810142535404550


Routing teflon and flexible boards.

Soft plastic,foils,PE,PTFE,Polymide, PMMA routing.

For material producing long chips Aluminium,Copper,Brass.

Thin prepegs routing.

SCAN TO ORDER




RECOMMENDED PARAMETERS FOR ROUTING

MATERIAL

SINGLE FLUTE ROUTER P926

PCBFR

PCBIMS

PCBCEM POLYIMIDE

FLEXIBLE

CUTTING SPEED (m/min) FR-4 FR-2 CEM 3 CEM 1 PE PTEF POLYIMIDE AI Cu/BRASS

190 - 200 160 - 180 160 - 180 160 - 180 100 - 120 100 - 120 100 - 120 200 - 250 180 - 220

ArticleP926

2.003.003.003.003.004.004.004.005.005.008.008.009.009.009.00

0.400.500.600.801.001.201.401.501.601.802.002.402.503.003.175

Diameter mm Chip Load microns

46810142240526466

PCBød Ø

D

38.00l




mm mm

SAFEEND


POINTDRILL


Routing of aluminium and copper panels.

Routing of IMS/metal PCB / Heat sink PCBs.

Depth routing with flat/square end style router.

SCAN TO ORDER



2F ALUMINIUM ROUTER

0.40*0.50*0.60*0.70*0.801.001.201.40*1.501.601.80*2.002.402.50*3.003.175*

2.002.503.003.003.004.004.004.005.005.006.007.007.008.008.008.00

--------------10.00-


RECOMMENDED PARAMETERS FOR ROUTING ALUMINIUM PCB

DIAMETER mm

1.001.201.401.501.601.802.002.402.503.00

0.400.600.80

SPINDLE SPEEDRPM

70000580005000046000440003900035000290002800023000

800008000080000

CHIP LOADmicron m/min

ROUTING DEPTHm/min mm

4.35.28.08.79.110.311.417.217.930.4

0.61.32.5

31.8

0.30.30.40.40.40.40.40.50.50.7

0.050.10.2

0.80.80.81.01.21.21.21.21.21.2

0.20.40.6

1.2

1.201.501.502.002.002.202.503.003.003.00

0.500.501.00

3.00

0.60.60.60.80.80.80.80.80.81.0

0.30.30.4

1.0

X-Y TABLE FEED Z-FEED RATE PRE DRILLED DEPTH IN TO BACK UP

3.175 22000 0.7

P424P422



PCBIMS

ØDød

38.00l

ØD

l38.00

ød

SAFEENDArticle

P422*ArticleP424

mm mm


Routing aluminium and copperheat sinks.

Routing flexi and flexirigid boards.

Excellent surface finish for plated through holes.

SCAN TO ORDER


0.80

1.201.501.601.902.00

3.00*3.175*

0.25 - 0.30*0.40*0.50* - 0.70

2.40




MATERIAL

APPLICATION

FISHTAILArticleP826

2 FLUTE ROUTER P826P820

CUTTING SPEED m/min FR-4 FR-2 CEM 3 CEM 1 PE PTEF POLYIMIDE Al Cu/BRASS

190 - 200 160 - 180 160 - 180 160 - 180 100 - 120 100 - 120 100 - 120 200 - 250 180 - 220

0.801.001.201.602.002.403.003.175

0.250.400.60

335812151820

122

68101834445355

345

68101834445355

345

810122240526466

356

810122240526466

356

810142535404550

356

810142535404550

356

810142535404550

356

335812151820

122

ArticleP820*

ØDød

38.00l

Diameter mm Chip Load microns

PCBIMS

PCBFR

PCBCEM POLYIMIDE

FLEXIBLE

PCB

mm mm




SAFEEND

2.50

1.001.10

5.005.00

5.00

5.006.006.006.008.008.00

10.0010.00

1.001.503.00

8.00

-8.00*

-

8.00*8.00*8.00*8.00*--

--

---

-



Routing Aluminium and Copper heat sinks.

Routing Flexi and flexirigid board.

Excellent surface finish for plated through holes.

Efficient chip evacuation.

SCAN TO ORDER



ArticleP436

3 FLUTE ROUTER

0.600.701.001.201.501.601.802.002.403.003.175



MATERIAL CUTTING SPEED m/min

FR-4 FR-2 CEM 3 CEM 1 PE PTEF POLYIMIDE Al Cu/BRASS190 - 200 160 - 180 160 - 180 160 - 180 100 - 120 100 - 120 100 - 120 200 - 250 180 - 220

1.201.602.002.403.003.175

0.600.801.00 3

5812151820

22

101834445355

568

810122240526466

6810142535404550

6

Diameter mm

101834445355

568

810122240526466

6810142535404550

7810142535404550

7

35812151820

22

3.003.005.005.007.007.007.009.009.0010.0010.00

IMSPCBFR

PCBPCBCEM POLYIMIDE

FLEXIBLE

PCB

Chip Load microns

P436

FISHTAIL

mm mm



ØDød

38.00l

5.00-7.50--------

mm/sec


For routing / depaneling PCBs in EMS industries.

For smooth finish.No loose burr on routed edge.Close dimensional control.Run with high feed rates and long tool life.

SCAN TO ORDER


1.40* 7.00

2.00

2.40*

2.50*

1.60

1.80*

8.00

10.50

10.50

8.00

8.00




DIAMETER mm

2.00

2.40

1.40

1.60

1.80

SPINDLE SPEEDRPM

30000

25000

38000

32000

30000

CHIP LOAD

HIGH PERFORMANCE DEPANELING ROUTER P650

mm/revX-Y TABLE FEED

m/min in/min

0.059

0.059

0.032

0.050

0.059

1.56

1.56

1.26

1.56

1.56

1.9

1.9

1.2

1.6

1.9

75

75

47

62

75


P650PATTERNDIAMOND

mil/rev

32

32

2.50 24000 0.059 1.56 1.9 7532

20

26

32

mm mm




ØDØd

l38.00

1.50* 8.00



Diamond patterened router used for routing contours in PCBs mannual feeding machines.

SCAN TO ORDER


3.175

2.00*

2.40*

3.00*

13.00

13.00

13.00

13.00

PATTERNDIAMOND



P628

PIN ROUTER P628



mm mm

ØDØd

l38.00


SPINDLE SPEEDRPM


DIAMETER mm


Z-FEED RATEm/min

2.00 30000 1.0 - 1.4 0.5

2.40 25000 1.0 - 1.4 0.5

3.00 20000 1.0- 1.3 0.5

3.175 20000 1.0 - 1.3 0.5


PCB routing outer and inner contours with very high surface finish requirements.It is especially used for edge trimming on pre- routed slots.

Burr free routing of gold fingers.

Excellent surface finish on pre-routed slots.

SCAN TO ORDER


1.00*1.40*1.50*1.60*1.80*2.00*2.40*2.50

0.60*0.80*1.00*

7.007.007.007.008.507.007.007.00

3.005.005.00


FINISHING ROUTER P370

Ød ØD

l38.00

mm mm




pcb routers - ind-sphinxindsphinx.com/wp-content/uploads/2017/12/pcb-routers.pdf · 0.40 0.60 0.80...

Documents