cleanroom lighting 14644-1 iso-3 fed std. 209e class 1 read more about cleanrooms here tl seriese...

8
Cleanroom Lighting Cornell University | Biosafety Lab BSL-3 | KL Series

Upload: lamdat

Post on 31-Jan-2018

228 views

Category:

Documents


1 download

TRANSCRIPT

Cle

anro

om L

ight

ing

Cornell University | Biosafety Lab BSL-3 | KL Series

TL SeriesIP-65, UL-1598 Wet 1700 PSI Washdown1000 hr Salt SprayISO-5 209E Class 100Inset 1-Piece DoorNSF Food Grade Gaskets

So, it is your job to choose a cleanroom fixture and you are wondering how to choose.

If you are looking for a fixture that is resistant to high pres-sure washdown, smooth clean-able surfaces, chemical resis-tant closed cell gaskets that are resilient and designed for a consistent seal.

Good.

You’re safe here.

EL SeriesIP-55 UL-1598 Wet 85 PSI Washdown1000 hr Salt SprayISO-5 209E Class 100Inset Channel DoorNeoprene Gaskets

100ISO-InseNeoNSF

Standard 2

Certified

ISO 14644-1

ISO-3

Fed Std. 209E

Class 1

Read more about

Cleanrooms here

eriesTL Se1598 WeIP-65, UL-

1700 PSI Washdow1000 hr Salt SprayISO-5 209E Class 1Inset 1-Piece DoorInset 1-Piece Doo

GNSF Food Grade

If you are looking for a that is resistant to highsure washdown, smootable surfaces, chemicatant closed cell gasketsare resilient and designconsistent seal.

Good.

You’re safe he

Certifiedfied

Fed Std. 209EF d Std 209E

Class 1

Read more ab

Cleanrooms h

CCEA

Certified

A

Certified

IEC 60529

Ingress Protection

Tested

CCEA

IEC 60529

Ingress Protection

Testeded

KL SeriesIP-66, UL-1598 Wet

1700 PSI Washdown

1000 hr Salt Spray

ISO-3, 209E Class 1

Overlapping 1-Piece Door

NSF Food Grade Gaskets

UL-844 Class I,II & III

NSF Std. 2 Food Zone

dd KL SeriesIP-66, UL-1598 Wet

1700 PSI Washdown

1000 hr Salt Spray

ISO-3, 209E Class 1

Overlapping 1-Piece Door

NSF Food Grade Gaskets

UL-844 Class I,II & III

NSF Std. 2 Food Zone

Choose any Kurtzon cleanroom fixture. Now that is simple.

KL Series- One Piece Overlap-ping Doorframe KL-F-2-2X4 Shown

TL Series- One Piece Inset Door-frame. TL-F-1-2X4 Shown

EL Series- Inset Welded Mitered Channel Doorframe EL-S-2-2x4 Shown

Cleanroom Rating

Fed Std 209E

ISO 14644 345678

1101001K10K100K

KL Series

TL Series

EL Series

Water Resistance

Pressure (psi) 1700100010050255

KL Series

TL Series

EL Series

HD1700

IP-66

HD1700

IP-65

HD85

IP-55

So you need: The Best A fully seam welded one piece housing.A doorframe that completely covers the flange or T-bar grid. A doorframe formed from a single piece of heavy gage metal that is corrosion resistant and without crevices. A lens that is first adhered to the frame and then mechanically secured along its full perimeter. NSF-2 Food Zone Hazardous locations Class I, II and III listed, Resistant to 1700 psi washdown. Certified IP-66, the highest of any cleanroom fixture.

So you need: Integrated Excellence A fully seam welded one piece housing. A doorframe that seals directly to the housing; a self-contained seal. A doorframe formed from a single piece of heavy gage metal that is corrosion resistant and without crevices. A lens that is first adhered to the frame and then mechani-cally secured along its full perimeter. NSF Non-Food Zone.Resistant to 1700 psi washdown Certified IP-65

So you need: Efficient Performance A fully seam welded one piece housing.A doorframe that seals directly to the housing; a self-contained seal. A doorframe with carefully mitered corners fully gasketed with resilient neoprene closed cell gasketing. A lens that is inverted and continuously sealed. NSF Non-Food Zone or Hazardous locations Class I listed, optionally resistant to 85 psi washdown and certified IP-55.

Then you only have one choice. That is the KL Series.

Your choice is clear. The TL Series.

Simply choose the EL Series.

WET LOCATION

209E100

FED STD 209E

CLASS 100

IP65

IEC 60529

ISO5

ISO 14644-1CLASS 5

NSF

NON-FOOD

Bio Safety Levels

BSL1 & 2

ISO3

ISO 14644-1CLASS 3

IP66

IEC 60529

WET LOCATION

209E1

FED STD 209E

CLASS 1

Bio Safety Levels

BSL3 & 4

1700

PSI

hosedown

NSF

FOOD

ZONE

WET LOCATION

209E100

FED STD 209E

CLASS 100

NSF

NON-FOOD

Bio Safety Levels

BSL1 & 2

IP55

IEC 60529

ISO5

ISO 14644-1CLASS 5

1700

PSI

hosedown

Specifications:

Klean Lock Advanced Clean Space Series

1x4, 2x2 and 2x4 High Efficiency Luminaires

Certified for ISO-3, 209E Class 1 Cleanspaces

Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or aluminum con-struction. Each are only 4.5 inches tall. Door Frame: One-piece overlapping style 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° hinged to housing with two stainless steel cables. Secured by captive stainless steel screws.Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern inverted. Sealed to door with NSF listed RTV silicone. See “Options” for other choices. Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.Installation: Grid: Standard luminaires accommo-date 1.0” & 1.5” and some 2.0” T-Bar Grid. Installation: Surface: Four .312” dia. mounting

holes and a removable gasketed wiring access plate. Gaskets: NSF Listed closed cell microcellular ex-truded KleanLock SealPro gasket with vulcanized corners making a one-piece oil and solvent resistant gasket system. Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially avail-able high efficiency and dimmable with 0-10v control. Suitable for through wiring.Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all recessed housings. Stainless steel doorframes and surface housings are satin polished unless option WHT is chosen. Listings: UL and CUL listed for wet locations. Dust and water resistance rated IP-66. NSF -C2 listed for food zone. Suitable for use in FDA & USDA in-spected facilities. Certified ISO-14464-1 classes 3 to 9 Fed. Std. 209E Class 1. See “Options” for Class I, Div. 2 Groups A, B, C & D Listing (X12) & Class 1, 2 & 3 Div. 2 & 3 Groups A, B, C, D, F & G Listing (X22). Bio-Safety levels 3 & 4. Rated for 1700 PSI hosedown.

Surface Section View

4.8”

Grid Section View

4.5”

Flange Section View

4.5”

ISO3

ISO 14644-1CLASS 3

IP66

IEC 60529

WET LOCATION

Standard

209E100

FED STD 209E

CLASS 100

BSL3 & 4

Bio Safety Levels

Optional

NSF

C-2 FOOD ZONE

Hazardous LocationClass 1 Division 2

Hazardous LocationClass II Division 2

Project: ________________________________

Fixture Type: ___________________________

Cat. Number: ___________________________

Approved By: ___________________________

Hazardous LocationClass III

Options

FF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* H/EM = 1 Lamp Hazardous Battery Pack WHT= White Finished Stainless Steel Door & Hsg. LEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass X12= Class I, Div. 2, groups A, B, C, D listing.*X22= Class 2, Div. 2 & 3, groups A, B, C, D, F & G list-ing.* (Not available in Surface Mounted)SW= Sealed Wireway (contact Kurtzon for details)† = SS Hsg. not available with 6/T5HO

Series Installation Type Material Size Source Voltage

KL - - - - / - -

120V 277V 347V* UNV*

KL F = Flange G = Grid S = Surface

Qty/Type

Ordering Information: (Example: KL-F-1-1x4-2/T5-UNV-FF)

1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door5= AL Hsg. & AL Door6= CRS Hsg. & AL Door

1x4 = 1'x4’ Housing

2x2 = 2’x2’ Housing

2x4 = 2’x4’ Housing

1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*

2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*

* Note: Not all options are compatible with other

options. Consult factory for additional lamp

choices & options marked "*".

2, 3, 4 or 6/T5 = F14T8 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*

1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT

2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT

2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT

Fluorescent LED Arrays

25

YearWarranty

Specifications:

Tech-Lock Optimized Clean Space Series

1x4, 2x2 and 2x4 High Efficiency Luminaires

Certified for ISO-5, 209E Class 100 Cleanspaces

Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or aluminum con-struction. Each are only 4.5 inches tall. Door Frame: One-piece inset style 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° hinged to housing with two stainless steel cables. Secured by captive stainless steel screws.Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern inverted. Sealed to door with NSF listed RTV silicone. See “Options” for other choices. Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.Installation: Grid: Standard luminaires accommo-date 1.0” & 1.5” T-Bar Grid. Installation: Surface: Four .312” dia. mounting

holes and a removable gasketed wiring access plate. Gaskets: NSF Listed closed cell microcellular ex-truded KleanLock SealPro gasket with vulcanized corners making a one-piece oil and solvent resistant gasket system. Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially avail-able high efficiency and dimmable with 0-10v control. Suitable for through wiring.Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all housings. Stainless steel doorframes are satin pol-ished unless option WHT is chosen. Consult factory for satin polished housings.Listings: UL and CUL listed for wet locations. Dust and water resistance rated IP-65. NSF -C2 listed for Non- food zone. Suitable for use in FDA & USDA in-spected facilities. Certified ISO-14464-1 classes 3 to 9 Fed. Std. 209E Class 1. See “Options” for Class I, Div. 2 Groups A, B, C & D listing (X12). Bio-Safety levels 1 & 2. Rated for 1700 PSI Hosedown.

WET LOCATION

Standard

209E100

FED STD 209E

CLASS 100

Optional

NSF

C-2 FOOD ZONE

Project: ________________________________

Fixture Type: ___________________________

Cat. Number: ___________________________

Approved By: ___________________________

Surface Section View

T-bar Grid Section View

Flange Section View

2x2 24x24.1 (609x612)

2x4 24x48.1 (609x1221)

4.5.”(113)

2x2 23.7x23.7 (602x602)

2x4 23.7x47.7 (602x1211)

4.5.”(113)

2x2 25x25.5 (635x648)

2x4 25x49.5 (635x1257)

TOGGLE RANGE 1.5-4.”(38-100)4.5.”(113)

IP65

IEC 60529

ISO5

ISO 14644-1CLASS 5

NSF

NON FOOD ZONE

Bio Safety Levels

BSL1 & 2

Options

FF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* H/EM = 1 Lamp Hazardous Battery Pack WHT= White Finished Stainless Steel Door & Hsg. LEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass SW= Sealed Wireway (contact Kurtzon for details)† = SS Hsg. not available with 6/T5HO

Series Installation Type Material Size Source Voltage

TL - - - - / - -

120V 277V 347V* UNV*

TL F = Flange G = Grid S = Surface

Qty/Type

Ordering Information: (Example: TL-F-1-1x4-2/T5-UNV-FF)

1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door5= AL Hsg. & AL Door6= CRS Hsg. & AL Door

1x4 = 1'x4’ Housing

2x2 = 2’x2’ Housing

2x4 = 2’x4’ Housing

1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*

2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*

* Note: Not all options are compatible with other

options. Consult factory for additional lamp

choices & options marked "*".

2, 3, 4 or 6/T5 = F14T8 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*

1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT

2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT

2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT

Fluorescent LED Arrays

25

YearWarranty

Specifications:

Series Installation Type Material Size Source Voltage

EL - - - - / - -

120V 277V 347V* UNV*

EL F = Flange G = Grid S = Surface

Qty/Type

Ordering Information: (Example: EL-F-1-1x4-2/T5-UNV-FF)

Eco-Lock Basic Cleanspace Series

1x4, 2x2 and 2x4 High Efficiency Luminaires

Certified for ISO-5, 209E Class 100 Cleanspaces

Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or aluminum con-struction. Each are only 4.5 inches tall. Door Frame: 20-gauge CRS, Aluminum or type 304 stainless steel channel door frame hinged to housing with two stainless steel cables. Secured by captive stainless steel screws. See Options for 85 PSI rating (HD85). Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern inverted. Sealed to Door with NSF listed RTV silicone. See “Options” for other choices. Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.Installation: Grid: Standard luminaires accommo-date 1.0” & 1.5” and some 2.0” T-Bar Grid. Installation: Surface: Four .312” dia. mounting

holes and a removable gasketed wiring access plate. Gaskets: Neoprene, 100% pure, closed cell located at interface of door to housing and door to lens. See Option “GG” for SealPro™ NSF Listed closed cell gasketing. Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially avail-able high efficiency and dimmable with 0-10v control. Suitable for through wiring.Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all housings and CRS or Aluminum doorframes. Stainless steel doorframes are satin polished un-less option WHT is chosen. Consult factory for satin polished housings.Listings: UL and CUL listed for wet Location. Dust and water resistance rated IP-55. Optional NSF -C2 listed for non-food zone. Certified ISO-14464-1 classes 5 to 9 Fed. Std. 209E Class 100. See “Options” for Class I, Div. 2 Groups A, B, C & D Listing (X12) . Bio Safety levels 3 & 4. Rated at 85 PSI Hosedown.

Surface Section View

T-bar Grid Section View

Flange Section View

WET LOCATION

Standard

209E100

FED STD 209E

CLASS 100

Optional

Hazardous LocationClass 1 Division 2

NSF

C-2 NON-FOOD

ZONE

Project: ________________________________

Fixture Type: ___________________________

Cat. Number: ___________________________

Approved By: ___________________________

Bio Safety Levels

BSL1 & 2

IP55

IEC 60529

ISO5

ISO 14644-1CLASS 5

1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door5= AL Hsg. & AL Door6= CRS Hsg. & AL Door

1x4 = 1'x4’ Housing

2x2 = 2’x2’ Housing

2x4 = 2’x4’ Housing

1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*

2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*

* Note: Not all options are compatible with other

options. Consult factory for additional lamp

choices & options marked "*".

2x2 25x25.5 (635x648)

2x4 25x49.5 (635x1257)

TOGGLE RANGE 1.5-4.”(38-100)

4.5.”(113)

2x2 23.7x23.7 (602x602)

2x4 23.7x47.7 (602x1211)

4.5.”(113)

2x2 24x24.1 (609x612)

2x4 24x48.1 (609x1221)

4.5.”(113)

85 PSI

HOSE DOWN

RATED

Options

FF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* H/EM = 1 Lamp Hazardous Battery Pack WHT= White Finished Stainless Steel Door & Hsg. GG= NSF Listed Seal-Pro Gaskets (Non-Food Zone)HD85= 85 PSI Hosedown ResistanceLEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass X12= Class I, Div. 2, groups A, B, C, D listing.*SW= Sealed Wireway (contact Kurtzon for details)† = SS Hsg. not available with 6/T5HO

2, 3, 4 or 6/T5 = F14T8 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*

1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT

2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT

2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT

Fluorescent LED Arrays

25

YearWarranty

Keyhole slots allow captive hardware and easy release of access panel.

NSF listings for Food Zone standard.

Eliminates ceiling access panels. Allows access wherever a fixture is located.

Large 16 x 40 inch access allows full body entry to the plenum space.

NSF listings for Food Zone standard.

Optional stainless steel available for highly cor-rosive environments.

No tools needed for servicing.

Continuously maintains seal pressure.

Smooth washable surfaces.

Great for BSL-3 and 4 spaces.

KL-x/TR Series Top Relamp Luminaires for Clean Spaces

2x2 and 2x4 Luminaires for Flange/Drywall, Grid Installation

Certified for ISO-3, 209E Class 1 Clean Spaces

KL-x/PA Series Plenum Access Luminaires for Clean Spaces

2x4 Luminaires for Flange/Drywall or Grid Installation

Certified for ISO-3, 209E Class 1 Clean Spaces

Continuous piano hinged top cover easily released for servicing.

Fully NSF gasketed for a sure fixture seal. A handle and mechanical

stop built into top cover prevent fixture damage.

Fully seam welded housing provides rigidity even with large access window.

The same great door frame and listings as found on the regular Klean-Lock series.

Lamps and ballasts may be changed from above or below .

Fully NSF gasketed for a sure fixture seal.

The same great door frame and listings as found on the regular Klean-Lock series.

A handle and cable hinges allow simple access to plenum space.

KL-x/EZ Series Screwless Doorframe Luminaires for Clean Spaces

1x4, 2x2 and 2x4 Luminaires for Flange/Drywall, Grid or Surface Installation

Certified for ISO-3, 209E Class 1 Clean Spaces

Zone

No tools neservicing.

Continuously maintainseal pressure.

ooth washable faces.

Optional availablerosive en

Greaspac

No screws to loose or be left untightened.

Kurtzon Lighting1420 South Talman AvenueChicago, IL 60608(800) 837-8937 Phone(773) 277-9164 Faxwww.kurtzon.com

Hazardous Locations & Lighting

www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898

Kurtzon LightingKurtzon Lighting 1 www.Kurtzon.com

Healthcare Facilities Brochure

www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898

Vol. II

Daylight Series / Round Domes

www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898

Food Processing Lighting

www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898

Kurtzon Lighting / Innovators In Lighting Since 1898

Kurtzon LightingKurtzon Lighting1 www.Kurtzon.com

Wet Location Lighting Brochure

www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898

Indoor Sports Lighting

www.Kurtzon.comKurtzon LightingKurtzon LightingInnovators in

Lighting Since 1898

Me

dic

al

Do

wn

lig

hts

Cle

an

roo

m L

igh

tin

g

Receive a copy of these brochures from your local sales representative

or download them from www.kurtzon.com/Technical_bulletins.

Chicago, IL 60608 (800) 837-8937www.kurtzon.com