crane care training – course catalog...
TRANSCRIPT
Crane Care Training – Course Catalog 2016 Passo Fundo, Brazil
Overview Contacts and trainers
Carlos Eduardo Batista RS 324 – KM 123,6 - Bairro Valinhos
Passo Fundo – RS - Brazil [email protected]
Phone: +5511 3103 0272 Cel: +5511 97553 8704
Overview Training Center Objectives
Dear Customers and Dealers, At Manitowoc Crane Care Brazil we understand the need for technical training. Providing your service technicians with training increases your productivity, reduces costs and increases your bottom line. The 2016 training schedule offers a comprehensive line up of technical courses for Grove, Manitowoc, National Crane and GHC Crane machines. These courses will provide your technicians with the skills and knowledge necessary for the execution of preventive maintenance, failure analysis and an overview of security systems and equipment operation. We strive to provide a personalized training session for each customer, customized to your needs. I am always available to discuss our training program and any questions you may have.
Overview Training Arrangements
REGISTRATIONS: Registrations should be made using a service purchase order and must be confirmed at least one week prior to the start of training. Requests can be submitted via e-mail to [email protected]. To request a training proposal, provide the model of the equipment, training name, number of participants and location of the training. Registrations can be made up to one week prior to the scheduled training. Bookings will only be confirmed upon advance payment. Participants should be those who work directly or indirectly with the equipment or those who have a basic knowledge of equipment operation. All participants must be 18-years-old. TRAINING SCHEDULES: All training classes will begin at 8:30 a.m. and end at 5:30 p.m. with a one hour lunch break. Training duration depends on the training selected. TRAINING LOCATIONS: Trainings will be held at the Manitowoc Factory in Passo Fundo (Rio Grande do Sul - Brazil). The classrooms for theoretical training are organized by Manitowoc as well the teaching materials and meals. Each training class requires a minimum of four participants. Accommodations, transport, travel and meals (outside of class) are the responsibility of the participant. TRAINING COSTS: Final training costs will be communicated to the registrants when the class has met the minimum number of participants.
Contents
Course Number Course Name Location Page
Prerequisite course
CST Crane System Theory Passo Fundo, Brazil 6
GMK
GMK 1 Intro to GMK Systems Passo Fundo, Brazil 7 GMK 2 ECOS Gen #1 Technology Passo Fundo, Brazil 8 GMK 3 ECOS Gen #2 Technology Passo Fundo, Brazil 9 GMK 4 Software GMK Passo Fundo, Brazil 10 GMK 5 Transmission and SBW Passo Fundo, Brazil 11
RT Grove 1.1 PAT systems Passo Fundo, Brazil 12 Grove 2.1 RT Gen #2 Passo Fundo, Brazil 13
Grove 3.1 RT Gen #3 Orchestra system Passo Fundo, Brazil 14
Grove 4.1 RT ECOS and EKS Passo Fundo, Brazil 15 Grove 5.1 CCS System Passo Fundo, Brazil 16 Grove 6.1 Software RT Passo Fundo, Brazil 17
Manitowoc Basic EPIC Intro EPIC System Passo Fundo, Brazil 18
Basic CANBUS Intro CANBUS System Passo Fundo, Brazil 19
National Crane National
1 Intro National Systems Passo Fundo, Brazil 20
National 2
Advanced National Systems Passo Fundo, Brazil 21
GHC GHC 1 Intro to GHC System Passo Fundo, Brazil 22
Course Summary
CST
6
Crane System Theory
Aim/Course goals: This course will cover the basic electric, hydraulic and pneumatic systems of Manitowoc equipment. Program: Basic knowledge in hydraulic, electric and pneumatic systems and how they apply in different models of cranes; application of symbology used in Manitowoc and Grove cranes;
Prerequisites Work with Manitowoc Cranes Line Duration 4 days Capacity 8 students
Dates available: 04/12 – 04/15/16
Training methods: Training is conducted in lecture format supplemented with hands-on activities. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test. Presentation of certificate.
GMK
7
GMK 1 – Intro to GMK Systems
Aim/Course goals: This course is for crane service technicians to gain basic knowledge of the workings of GMK cranes. Program: Interpretation and understanding manuals and schematics; configuration an identification and of the components and ECOS and EKS systems; operations aspects; emergency procedures.
Prerequisites CST training Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media and printed schematics. Validation of knowledge: Pre test, daily homework, daily tasks and final test. Presentation of certificate.
Dates available: 06/06 - 06/10/16
GMK
8
GMK 2 – ECOS GEN 1
Aim/Course goals: This course is for crane service technicians to gain advanced knowledge of the GMK ECOS Gen #1 machines. Program: Understanding working concepts of the GMK ECOS 1; Troubleshooting, configuration of the ECOS 1; EKS 4 system
Prerequisites GMK 1 Duration 5 days Capacity 8 students
configuration and troubleshooting; Error codes understanding; emergency operation; service software. Training methods: Training is conducted in lecture format supplemented with hands-on activities. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media and printed schematics. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 08/15 - 08/19/16
GMK
9
GMK 3 – ECOS GEN 2
Aim/Course goals: This course is for crane service technicians to gain advanced knowledge of the GMK ECOS Gen #2 machines. Program: ECOS CANBUS structure principles; EKS 5 system; Service sóftware; Study of ECOS system logics of inputs, outputs and control system in the different modules.
Prerequisites GMK 2 Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the simulators and machine* (if available). Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media and printed schematics. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 08/22 - 08/26/16
GMK
10
GMK 4 – Software GMK
Aim/Course goals: This course is for crane service technicians works with the different software of the ECOS and EKS system. Program: Fully reprogram operation software into all EKS and ECOS systems and displays; Configuration of the eeprom data in the ECOS and EKS; Identify and calibrate all sensors of the EKS;
Prerequisites GMK 3 Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the simulators and machine* (if available). Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test (practical and theoretical.
Dates available: 10/17 - 10/21/16
GMK
11
GMK 5 – Transmissions and SBW
Aim/Course goals: This course is for crane service technicians to gain basic knowledge of the GMK engine and transmission and SBW system. Program: Operational aspects and troubleshooting (Minidiag 2) transmission Mercedes G240; ZF Astronic transmission; Alisson Transmission; SBW system
Prerequisites GMK 4 Duration 5 days Capacity 8 students
5 and 6 axle; Service Software SBW. Training methods: Training is conducted in lecture format supplemented with hands-on activities on the machine* (if available). Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 10/24 - 10/28/16
RT
12
Grove 1.1
Aim/Course goals: This course is for crane service technicians to gain knowledge that how CANBUS technology works and different types of LMI systems used in RT Cranes. Program: CANBUS technology and diagnostics; LMI PAT system circuits , sensors calibrations and troubleshooting; software procedures.
Prerequisites CST training Duration 4 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the machine and simulators. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 05/10 - 05/13/16
RT
13
Grove 2.1
Aim/Course goals: This course is for crane service technicians to gain basic operational knowledge of Grove cranes and hydraulic, electric structure and software diagnostics programs for RT gen#2. Program: Identification of carrier and superstructure
Prerequisites Grove 1.1 Duration 5 days Capacity 8 students
components; Identification, understanding hydraulic and electrical symbols and schematics; basics tests, procedures and troubleshooting using software program. Training methods: Training is conducted in lecture format supplemented with hands-on activities on the machine and simulators. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media and printed schematics. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 05/16 - 05/20/16
RT
14
Grove 3.1
Aim/Course goals: This course is for crane service technicians works with Grove gen#3 CANBUS and multi modules schematics and Orchestra service software. Program: Identify hydraulic and electrical components; Troubleshooting and calibrations using hydraulic and electrical schematics and service software.
Prerequisites Grove 2.1 Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the machine and simulators. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media and printed schematics. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 10/03 - 10/07/16
RT
15
Grove 4.1 – ECOS and EKS
Aim/Course goals: This course is for crane service technicians to gain knowledge of the RT9150 and TMS9000E ECOS and EKS system machines. Program: Identify hydraulic and electrical components; Troubleshooting and calibrations using hydraulic and electrical schematics; ELAN schematics and service software.
Prerequisites Grove 3.1 Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the simulators. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media and printed schematics. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 11/21 - 11/25/16
RT
16
Grove 5.1 – CCS System
Aim/Course goals: This course is for crane service technicians works with the new Grove system CCS. Program: Identification of CCS components; CANBUS system of the CCS; understanding and troubleshooting electrical and hydraulic schematics; service software CCS; error codes identification.
Prerequisites Grove 4.1 Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the simulators. Materials and classrooms used: Training theory, presentations, videos and manuals are provided to each participant on digital media and printed schematics. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: 11/28 - 12/02/16
GMK
17
Grove 6.1 – Software RT
Aim/Course goals: This course is for crane service technicians works with different types of software RT. Program: HED Gen 1, 2 & 3 software; Hirschman software; Raico Wylie software; ECOS software; CCS Software procedures.
Prerequisites Grove 5.1 Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the simulators and cranes. Materials and classrooms used: Training theory, presentations, videos; software and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test practical and theoretical.
Dates available: 12/12 - 12/16/16
Manitowoc
18
Basic EPIC
Aim/Course goals: The course is to familiarize the crane service technician with Manitowoc EPIC technology. Program: Component description and location; interpretation of hydraulic and electric schematics; advanced pneumatics principles; LMI
Prerequisites CST Training Duration 5 days Capacity 8 students
system configuration and operation; pressure adjustment and calibration procedures; principles of operation of each function, and diagnosing failures and errors. Training methods: Training is conducted in lecture format supplemented with hands-on activities on the simulators. Materials and classrooms used: Training theory, presentations, videos; software and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: When required
Manitowoc
19
Basic CANBUS
Aim/Course goals: The course is to familiarize the crane service technician with Manitowoc CANBUS technology. Program: Component description and location; interpretation of hydraulic and electric scheme; advanced pneumatics principles; LMI system configuration and
Prerequisites CST Training Duration 5 days Capacity 8 students
operation; procedures to adjust and calibrate pressures; the principles of operation of each function and diagnostic techniques of failures and mistakes. Training methods: Training is conducted in lecture format supplemented with hands-on activities on the simulators. Materials and classrooms used: Training theory, presentations, videos; software and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test practical and theoretical.
Dates available: When required
National Crane
20
National 1
Aim/Course goals: The goal of this course is to familiarize participants with the working and operating principles of National Crane boom truck machines and technology. Program: Component description and location; interpretation of equipment load charts; preventive maintenance
Prerequisites CST Training Duration 4 days Capacity 8 students
plans, configuration and operation of LMI system; understanding operating and service manuals and the principles of each function operation. Training methods: Training is conducted in lecture format supplemented with hands-on activities on the cranes* (if available). Materials and classrooms used: Training theory, presentations, videos; software and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: When required
National Crane
21
National 2
Aim/Course goals: The course will cover the use of hydraulic and electrical schematics for failure diagnosis, and how to test and adjust pressures. Program: Advanced hydraulic, electrical and pneumatic principles; procedures for pressure adjustment and troubleshooting; CANBUS technology; Software procedures.
Prerequisites National 1 Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the cranes* (if available). Materials and classrooms used: Training theory, presentations, videos; software and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: When required
GHC
22
GHC 1 – Intro to GHC System
Aim/Course goals: The course is to familiarize the crane service technician with Grove GHC technologies. Program: Component description and location; interpretation of equipment load charts; interpretation of hydraulic and electric schematics; troubleshooting techniques and test procedures.
Prerequisites None Duration 5 days Capacity 8 students
Training methods: Training is conducted in lecture format supplemented with hands-on activities on the cranes* (if available). Materials and classrooms used: Training theory, presentations, videos; software and manuals are provided to each participant on digital media. Validation of knowledge: Pre test, daily homework, daily tasks and final test.
Dates available: When required
Overview Address/Map
Manitowoc Brasil Guindastes Centro de Treinamento Técnico
Rodovia RS 324 KM 123,6 Valinhos – Passo Fundo – RS
CEP: 99032-680
Overview Registration form
Course Registration. Send a purchase order to: Manitowoc Crane Care Brasil – Training Center – Rodovia RS 324 KM 123,6 Valinhos Passo Fundo – RS CEP: 99032-680 E-mail: [email protected]
©2015 Manitowoc www.manitowoccranes.com