pdi p9tv color television
TRANSCRIPT
Document Number PD196-035 Rev 2
Service Manual
Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 PH: 937-743-6010 FX: 937-743-5664 http://www.pdiarm.com
PERSONA9
Hospital-Grade Television
Model P9TVColor Television
Better Solutions Are Within Reach�
Document Number PD196-035 Rev 2 29 April 2003 Page 2
Voltage Range AC 18-35 Volts DC 18-33 Volts
HOT CHASSIS Use of isolation
transformer required.
Graphical Symbols This lightning flash with arrowhead symbol, within an equilateral is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This service manual contains various CAUTIONS and WARNINGS indicated by triangular warning symbols, which should be read and understood in order to minimize the risk of personal injury to service personnel and customers. The possibility exits that improper service methods may damage the equipment or result in property damage or user injury. It also is important to understand that these CAUTIONS and WARNINGS are not exhaustive. PDI could not possibly know, evaluate and advise the service industry of all conceivable methods in which service might be done or of the possible hazardous consequences of each method. Accordingly, a servicer who uses a service procedure or tool which is not recommended by PDI must first satisfy themselves thoroughly that neither their safety nor the safe operation of the equipment will be compromised by the service method selected.
Product Safety Servicing Precautions 1. MODIFICATIONS Do not attempt to modify this product in any way
without written authorization from PDI. Unauthorized modifications will not only void the warranty, but may lead to your being liable for any resulting property damage or user injury.
2. POWER SOURCE Use only a power source from a CSA Certified / UL Approved Class 2 Power Supply suitable for use in a Health Care Facility. This TV will operate on either DC or AC voltage.
3. X-RAYS To reduce the risk of possible exposure to X-Radiation, observe the “X-Ray Radiation” section in this service manual.
4. HOT CHASSIS This television employs a “HOT CHASSIS”. An
isolation transformer should be used during any dynamic service to avoid a possible shock hazard.
5. REPLACEMENT PARTS Parts critical to the safe operation of this television are marked with a on schematics or drawings. Replace only with the part number specified.
6. SAFETY CHECKS This hospital grade television requires special safety checks before returning to service. Observe and follow the “Safety Check” section in this service manual.
Document Number PD196-035 Rev 2 29 April 2003 Page 3
Table of Contents HEADING PAGE Graphical Symbols 2 Product Safety Servicing Precautions 2 Table of Contents 3 Copyright, Disclaimer, and Trademarks 4 UL Recognition and Product Identification UL Recognition 5 Product Label 6 Serial Number 6 Printed Circuit Board Identification 7 Remote Control Programming Remote (PD108-213) 8 Patient Remote 8 General Specifications 9 Disinfecting and Cleaning 13 Hidden Factory Menu 14 Accessing 14 Screen 14 W. BAL 15 PICTURE 15 Service 1 16 Volume Test 16 Device Check 16 EEPROM Reset 17 UOC Control 17 CCD Test 17 Adjustments Screen Voltage 18 Horizontal Position 18 Height 18 Vertical Linearity (Picture Stretch) 18 White Balance 19 Focus 19 Picture Purity & Convergence Adjustments Color Purity Adjustment 20 Center Convergence 21 Edge Convergence 22 Power Supply Alignment 24 Safety Checks Parts Placement 25 Swivel Resistance Test 25 AC Leakage Current Test 25 X-Ray Radiation Checks High Voltage Check 26 High Voltage Shut-Down Circuit 26 Troubleshooting 27 Schematics Block Diagram 30 Audio 31 CRT & Degausser 32 Keypad 33 RF/PWR Splitter 34 Sweep 35 Tuner & Memory 36 Micro – Jungle IC 37 Power Supply 38 P9TV – Entire Schematic 39 Component Pin-Outs 40 Exploded View 44 Parts List 45
Copyright, Disclaimer, and Trademarks
Document Number PD196-035 Rev 2 29 April 2003 Page 4
Copyright, Disclaimer, and Trademarks
Copyright PDI Communication Systems, Inc. claims proprietary right to the material disclosed in this service manual. This manual is issued in confidence for servicing information only and may not be used to manufacture anything shown herein. Copyright by PDI Communication Systems, Inc. All rights reserved.
Disclaimer The author and publisher have used their best efforts in preparing this manual. PDI Communication Systems, Inc. makes no representation or warranties with respect to the accuracy or completeness of the contents of this manual and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose and shall in no event be liable for any loss of profit or any other damages, including but not limited to special, incidental, consequential or other damages. The information contained herein is believed accurate, but is not warranted, and is subject to change without notice or obligation.
Trademarks All brand names and product names used in this manual are trademarks, registered trademarks, or trade names of their respective holders. PDI and Better Solutions Are Within Reach are registered trademarks of PDI Communication Systems, Inc., Springboro, Ohio.
UL Recognition and Product Identification
Document Number PD196-035 Rev 2 29 April 2003 Page 5
UL Recognition and Product Identification UL Recognition The model PDI-P9TV Hospital Grade TV Receiver is a specialized television. This TV is intended for entertainment and educational purposes for use in a hospital, a nursing home, a medical-care center, or a similar health-care facility in which installation is limited to a non-hazardous area in accordance with the National Electrical Code, ANSI/NFPA 70. It is not intended for use in a critical-care area in which a patient may be treated with an externalized electrical conductor, such as a probe, a catheter, or other electrode, connected to the heart: however, the product is likely to be contacted by a patient during his stay in a health-care facility. This device is safety tested and listed by the Underwriters Laboratories as a product suitable for use in health care facilities in both the United States and Canada.
Hospital Grade TV Receiver
E235510 3FW0
This device is safety tested and listed by the Underwriters Laboratories as a product suitable for use in health care facilities in both the United States and Canada.
For additional information regarding PDI Communication Systems products, safety testing, and approvals; 1. Go directly to the Underwriter Laboratories web site at
http://www.ul.com/database
2. Search for PDI products by clicking on UL File Number. 3. Enter one of PDI’s health-care products UL file number.
E136994 E235510
UL Recognition and Product Identification
Document Number PD196-035 Rev 2 29 April 2003 Page 6
Product Identification PRODUCT LABEL The P9TV is easily identified using the product label located in the center of the back cabinet.. SERIAL NUMBER The serial number is located at the lower right corner of the product label. Serial Number Format Explanation
a. Digits 01 are year of manufacture. Example year 2003 would be 03.
b. Digits 23 are week of manufacture. Example 13 would be week 13.
c. Digits 456789 is the TV unit serial number. Example 000001 is the first unit manufactured.
d. Letter A is single letter denoting the TV model revision level. Example A would be the initial model. First model revision would be B. The second model revision would be C and so on.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE CONDITION THAT THIS DEVICE DOES NOT CAUSE HARMFUL INTERFERENCE. THIS DEVICE COMPLIES WITH DHHS RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
CommunicationSystems, Inc.
PERSONA9MODEL/MODELE NO: PDI-P9TV RATED: AC 18V-35V 60Hz 50W DC 18V-33V 50W
CAUTION ATTENTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
RISQUE DE CHOC ELECTRIETUE NE PAS QUVRIR
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFED SERVICE PERSONNEL.
AFIN DE REDUIRE LES RISQUES DE CHOC ELECTIQUE, NE PAS RETIRER LE COUVERCLE (OU LE PANNEAU ARRIER). AUCUN ORGANE
INTERNE NE PEUT ETRE REPARE PAR L’UTILISATEUR. CONFIER L’APPAREIL A UN
DEPANNEUR QUALIFIE.
Hospital GradeTV Receiver
E235510 3FW0 PDI Communication Systems, Inc.
40 Greenwood Lane Springboro, Ohio 45066 USA
���������������0313-002000-A
MANUFACTURED / FABRIQUE: FEBRUARY 2003 MADE IN KOREA / FABRIQUE EN CORĖE
�����������
0123-456789-A
UL Recognition and Product Identification
Document Number PD196-035 Rev 2 29 April 2003 Page 7
Printed Circuit Board Identification Main Chassis The main chassis contains part number, release version, and individual board serial numbers silk-screened on both the top and bottom sides of the board with a location at the back near the LED indicators.
CRT Circuit Board The CRT circuit board also contains the board part number, release version, and individual board serial numbers silk-screened on both the top and bottom side of the board. Due to the boards smaller size, this information is located along the board’s edges. NOTE: Chassis and CRT board serial numbers will not be the same.
PTPM0510HPPDI-VER:001005 SN:11893252
PART NUMBER RELEASE VERSION
INDIVIDUAL SERIAL NUMBER
Remote Control
Document Number PD196-035 Rev 2 29 April 2003 Page 8
Remote Control The P9TV requires a remote control (part number PD108-213) to program the set. You will NOT find a remote control packed with the television. The remote control is shipped separate from the television. The remote control has a limited range to prevent dual programming of an adjacent room TV. Stand within 3 feet from the front of the TV to use the remote.
PROGRAMMING REMOTE (PD108-213)
PATIENT REMOTE A PDI patient remote control is currently unavailable. However, several universal remote controls will provide simple control of the P9TV. Please note that only channel and volume control functions are typically accessible using the following universal remotes. BRAND CODE One For All 0180 Zenith 805, 906
1 2
3
4 5
6
7 8
9
0
CC
100
PAID
LOCKED
UNLOCKED
CH
CH
VOL VOL SETUP
MUTE
DISABLED PREMIUM
FREE BASIC
POWER BUTTON MYSTERY BUTTON Non-Functional
General Specification
Document Number PD196-035 Rev 2 29 April 2003 Page 9
General Specification 1. SYSTEM CRT Size 9” Deflection 90 degree Color System NTSC 3.58 Speaker 1 Speaker Position Front Mounted Size 2 13/16” x 1 5/8” Impedance 8 ohms Output 1.0 Watt Max. Distortion 10% at 0.8W 2. TUNING Type North American NTSC Type M System Frequency Synthesized Control Digital I2C Input Impedance 75 ohms Channel Range VHF: 2 – 13, UHF: 14-69, CABLE 1, 14-125 Picture IF 45.75 Mhz Sound IF 41.17 Mhz Color Sub Carrier 42.17 Mhz Preset Channels No Stereo Sound No SAP Decoder No 3. POWER Multi-Voltage Yes DC Voltage 18-33 VDC AC Voltage 18-35 VAC Power Consumption 50 Watts Standby Power 2.5 Watts Protection 4A, 125V Fuse 4. REGULATION Safety UL, cUL Interference FCC X-Radiation DHHS 5. ON SCREEN DISPLAY Menu Type Character Menu Entrance IR Remote Control Only Picture Brightness Yes Contrast Yes Color Yes Tint Yes Sharpness Yes Fine Tune Yes Channel Setup Signal Air, CATV Autoprogram Free Programmable Tier
General Specification
Document Number PD196-035 Rev 2 29 April 2003 Page 10
Basic Programmable Tier Premium Programmable Tier Clear Service Level Free Erasable Tier Basic Erasable Tier Premium Erasable Tier Add/Delete Channels Free Individual Channels Basic Individual Channels Premium Individual Channels Copy Service Level Yes Features Power ON Channel & Spkr Free Start Channel, Speaker On/OFF Basic Start Channel, Speaker On/OFF Premium Start Channel, Speaker On/OFF Volume Limiter Yes Caption Text Mode Enabled, Disabled Language English, French, Spanish Service Levels Disabled, Free, Basic, Premium Paid Yes, No Self Rent Locked, Unlocked Channel Number Yes Channel Labels No Sleep Timer No Sound Mute Yes V-Chip Rating No 5. FEATURES Sleep Timer No On/Off Timer No Auto Shut OFF Yes - Disable Mode, No Channel Programmed Auto Degauss Yes Anti-Theft Alarm No Rental Yes Service Levels 3 Rental Lamps 3 Patient Self Rent Yes – Programmable Payment Lamp Yes Attendant Remote Control Yes Patient Remote Control No Non-Volatile Memory Yes Last Channel Yes Last Volume Yes Power On Channel Yes – Selectable SAP No AC Power On Mode No Auto Channel Search No Game Port No Channel Labels No Channel Numbers Yes Full OSD No Comb Filter No
General Specification
Document Number PD196-035 Rev 2 29 April 2003 Page 11
Auto Channel Memory Yes Hotel Lock No Closed Captions Yes Speaker Mute Yes 6. CONTROLS Switch Type Membrane Front Power Yes Volume Up Yes Volume Down Yes Channel Up Yes Channel Down Yes Mute/Enter Yes CC Yes Rent Yes Cursor Up Yes – Present, Non Functional Cursor Down Yes – Present, Non Functional Cursor Left Yes – Present, Non Functional Cursor Right Yes – Present, Non Functional Rear None Indicator Power Yes Stand-By No Terminals Video Input No Audio Input No Video Input No Video Output No Earphone Yes External Speaker No Power/RF Input F-Type AC Line Cord No AC Outlet No 7. REMOTE IR Format Custom Power Source “AAA” x 2 Total Keys 27 Keys Power Yes 1 Yes 2 Yes 3 Yes 4 Yes 5 Yes 6 Yes 7 Yes 8 Yes 9 Yes 0 Yes 100 Yes
General Specification
Document Number PD196-035 Rev 2 29 April 2003 Page 12
CH Up Yes CH Down Yes Vol Up Yes Vol Down Yes Setup Yes Mute Yes Paid Yes Locked Yes Unlocked Yes Disabled Yes Free Yes Basic Yes Premium Yes Blank Yes – Non Functional 8. PHYSICAL Cabinet Size 10.5 x 13 x 12 (W x D x H) inches Weight (Approx.) 14.5 lbs.
10 ½”
13”
12”
Disinfecting and Cleaning
Document Number PD196-035 Rev 2 29 April 2003 Page 13
Disinfecting and Cleaning The P9TV should be disinfected before performing any service. The following procedure is only a recommendation. Your hospital or company may have a different procedure to follow.
CAUTION – Before using any cleaning or disinfecting agent on the P9TV, perform a spot check by wetting a small area of the cabinet. Verify the agent does not discolor or deteriorate the cabinet.
Disinfecting
1. The P9TV has been designed to withstand up to a 5% chlorine based disinfectant. Many alcohol and ammonia based disinfectants have also been tested with success. However, before using any cleaner or disinfectant, spot check a small area on the cabinet.
2. Apply the cleaner or disinfectant per its recommended instructions. Note – most disinfectants require a waiting time following application and prior to wipe-down.
Cleaning Stubborn ink and other scratch type marks may prove difficult to remove. A dilute solution of Isopropyl alcohol will generally work when all else fails. However, full strength Isopropyl will remove the cabinet’s paint. Use with caution!
Hidden Factory Menu
Document Number PD196-035 Rev 2 29 April 2003 Page 14
Hidden Factory Menu Accessing A hidden factory adjustment menu is available to the knowledgeable service man using the following procedure. To access the menu use the PDI remote control (part number PD108-213).
1. With the TV turned OFF, activate the hidden factory menu by press the following IR remote key sequence:
CC + SETUP + 3 + 8 +POWER(ON)
2. The menu for the hidden factory menu should be displayed over the normal picture.
The factory menu consists of 9 sub menus.
1. SCREEN 2. W.BAL 3. PICTURE 4. SERVICE1 5. VOLUME TEST 6. DEVICE CHECK 7. EEPROM RESET 8. UOC CONTROL 9. CCD TEST 2003-2-20-191
3. Select each adjustment sub menu by pressing the CH▲ or CH▼ button on the IR remote. You may enter the sub menu by pressing VOL+ or VOL–.
DO NOT SELECT sub menu Item 7, EEPROM RESET. Any changes made in this item could render the television inoperative.
DO NOT SELECT sub menu Item 8, UOC CONTROL. Any changes made in this item could render the television inoperative.
1. SCREEN READ ONLY – Displays the tube’s beam current history and settings. BCF (Black Current Loop False) READ ONLY Reflects the condition of the black current loop. Can be used at start-up or for regular check during normal operation to indicate RGB stage malfunctioning. Default is “OK”.
CAUTION – DO NOT ADJUST
CAUTION – DO NOT ADJUST
BCF : OK HBC : LOW WBC: LOW LOW
Hidden Factory Menu
Document Number PD196-035 Rev 2 29 April 2003 Page 15
HBC (HELP ABOVE/BELOW BCL WINDOW) READ ONLY Indicates the condition of the tube’s beam current.
LOW – Beam Current is below 12 microamperes HIGH – Beam Current is above 12 microamperes
WBC (BCL WINDOW) READ ONLY Reading WBC indicates whether the beam current is in the window of 12 - 20 microamperes, while HBC indicates whether the current is above or below the window. LOW READ ONLY Overall summary indication of the beam current. Default is “LOW”. NOTE: The only means to exit this sub menu is to turn the TV OFF. 2. W. BAL WHITE BALANCE – Provides RGB “Drive” and “Cut” for color balance of the picture. Each signal is displayed at the bottom of the screen with its current value.
Remote Button Signal Range Typical Value
1 R-CUT 0-63 32 5 G-CUT 0-63 32 9 R-DRV 0-63 32 0 G-DRV 0-63 32
100 B-DRV 0-63 32 NOTE: Adjust values using the Vol+ or Vol– keys. The only means to exit this sub menu is to turn the TV OFF. 3. PICTURE PICTURE – Provides horizontal position, height, and picture stretch adjustments. HRS – HORIZONTAL SHIFT Adjusts the horizontal position of the picture on the screen. HEIGHT – HEIGHT Adjusts vertical picture size (height). S-C – VERTICAL S-CORRECTION Adjusts the vertical S-correction, also known as vertical linearity or picture stretch.
1. HRS 40 2. HEIGHT 34 3. S-C 0
Hidden Factory Menu
Document Number PD196-035 Rev 2 29 April 2003 Page 16
Picture Range Typical Value
HRS 0-63 35 HEIGHT 0-63 33
S-C 0-63 7 NOTE: The only means to exit this sub menu is to turn the TV OFF. 4. Service 1 Picture Adjustment Master Range Limits – Allows each picture parameter to have a minimum or maximum range limit and sets the number of discrete steps during adjustment. Current parameter values are also displayed. For example, setting a parameter to a minimum value of 0 and a maximum value of 63 will allow 64 discrete adjustment steps when that parameter is adjusted in the “SETUP” – “PICTURE” user menu. This menu is best left alone.
Parameter Range Default Values Min Cnt Max
Bright 0-63 7 42 63 Contrast 0-63 0 45 63
Color 0-63 3 25 63 Tint 0-63 0 35 63
Sharpness 0-63 10 35 63 AGC 0-63 45
NOTE: The only means to exit this sub menu is to turn the TV OFF. 5. VOLUME TEST VOLUME TEST – Sets the TV’s volume to maximum for testing. Default is “MIN”. 6. Device Check Device Check – When activated the micro will individual test for communication to all devices connected on the I2C bus.
TEST DEVICE <<Press Left/Right>> UOC Connected EEPROM Connected Tuner Connected ETC 00001 Disconnected ETC 00002 Disconnected ETC 00003 Disconnected ETC 00004 Disconnected ETC 00005 Disconnected
Hidden Factory Menu
Document Number PD196-035 Rev 2 29 April 2003 Page 17
7. EEPROM Reset EEPROM Reset – Resets the entire contents of the eeprom to “0”. DO NOT ADJUST. Adjustment to this sub-menu item will render the TV inoperative and ruin your day!
DO NOT SELECT sub menu Item 7, EEPROM RESET. Any changes made in this item could render the television inoperative.
8. UOC Control UOC Control – Provides individual adjustment to the values held in the Micro’s status registers. DO NOT ADJUST. Adjustment to this sub-menu item will render the TV inoperative and also ruin your day!
DO NOT SELECT sub menu Item 8, UOC CONTROL. Any changes made in this item could render the television inoperative.
9. CCD TEST CCD TEST – Provides a factory set channel bank and “AIR” tuning for closed caption testing purposes. Activating “CCD TEST” will erase all service levels and set “FREE” to “AIR” tuning and channels 2 – 13 only.
ADJUSTMENTS
Document Number PD196-035 Rev 2 29 April 2003 Page 18
Adjustments
Screen Voltage 1. Input a standard color bar pattern. 2. Turn the TV ON and allow the TV to
warm for 30 minutes. 3. Connect an oscilloscope probe to the
screen voltage connection on the CRT board (on C904).
4. Adjust the “SCREEN” voltage control on the flyback for a 135V p-p signal as shown below.
Horizontal Position 1. Input a cross-bar test pattern. 2. Turn the TV ON and allow the TV to warm for 30 minutes. 3. Enter the hidden Factory Menu and select “3. Picture”. Select
“HRS”. 4. Use the Vol+/- keys to center the pattern.
Height 1. Input a cross-hatch test pattern. 2. Turn the TV ON and allow the TV to warm for 30 minutes. 3. Enter the hidden Factory Menu and select “3. Picture”. Select
“HEIGHT”. 4. Use the Vol+/- keys to adjust the picture height. The
adjustment should be set such that approximately 10% of the picture is being over-scanned (not shown).
Vertical Linearity (Picture Stretch) 1. Input a cross-hatch test pattern. 2. Turn the TV ON and allow the TV to warm for 30 minutes. 3. Enter the hidden Factory Menu and select “3. Picture”. Select
“S-C”. 4. Use the Vol+/- keys to adjust the picture’s vertical linearity.
The adjustment should be set such that the spacing between horizontal lines appear all equal.
SCREEN
FOCUS
DC GND
BLACK LEVEL
135V
p-p
CENTER 10%
10%
WHITE LEVEL
EQUAL SPACING
ADJUSTMENTS
Document Number PD196-035 Rev 2 29 April 2003 Page 19
White Balance 1. Input a pure white pattern. 2. Turn the TV ON and allow the TV to warm for 30 minutes. 3. Verify the Screen voltage is correctly adjusted. See “Screen Voltage Adjustment”. 4. Using a “White Balance Meter”, place the probe at the center of the picture screen. 5. Adjust “Contrast” and “Brightness” until the “Y” value of the meter roughly reads 35FL. 6. Enter the hidden Factory Menu and select “2. W.BAL”. 7. Select “R-DRV” and “G-DRV” and adjust them for the following meter values.
High Light
X Y 0.261 0.268
8. Adjust “Contrast” and “Brightness” until the dark area (low light) of the picture is 5FL. 9. Select “G-CUT” and “B-CUT” and adjust them for the following meter values.
Low Light
X Y 0.261 0.268
Focus 1. Input a “Cross Dot” test pattern. 2. Turn the TV ON and allow the TV to
warm for 30 minutes. 3. Rotate the “FOCUS” control on the
flyback transformer until the horizontal and vertical lines become thin. Adjust for the thinnest line possible.
4. Remove the test pattern and tune a conventional TV channel. Verify correct focus.
SCREEN
FOCUS
Picture Purity & Convergence Adjustments
Document Number PD196-035 Rev 2 29 April 2003 Page 20
Picture Purity & Convergence Adjustments PREPARATIONS
1. Allow the TV to warm-up at least 15 minutes. 2. Position the face of the CRT to either a east or west direction. This will minimize any
effect from the earth’s magnetism. 3. Demagnetize the picture tube using a degaussing coil before adjustments. 4. Connect a pattern generator as a signal source.
Color Purity Adjustment 1. Select the purity pattern on the generator.
2. Use a IR remote control and turn up the contrast and brightness settings to maximum.
3. Enter the hidden factor service menu and record both the RED and BLUE BIAS settings.
Now adjust RED and BLUE BIAS to zero. This will provide a GREEN raster.
4. Loosen the yoke clamp screw and slide the yoke backward (toward the neck side) slowly, and stop it at the position when a green band appears on the picture screen.
5. Rotate and spread the tabs of the purity magnet (front set of magnets) around the neck of the picture tube until the green band is centered vertically.
YOKE CLAMP SCREW
SPREAD
ROTATE
ROTATE
Picture Purity & Convergence Adjustments
Document Number PD196-035 Rev 2 29 April 2003 Page 21
Color Purity Adjustment – continued 6. Move the yoke slowly forward
until a uniform green screen is obtained. Usually this is the same as the original resting position against the rubber wedges. Tighten the yoke clamp screw.
7. Check the purity of the RED and BLUE BIAS by adjusting the settings back to their original value recorded in Step 3. White Balance Adjustment may be required.
8. Proceed with the center
convergence adjustments.
Center Convergence 1. Connect a signal pattern generator and
select a crosshatch pattern.
2. Using a remote control, adjust the
Contrast and Brightness settings for a well defined pattern.
3. Adjust the two tabs of the 4-Pole
magnets to combine red and blue lines of the crosshatch pattern on the center of the screen. Spread the taps apart to adjust vertical line alignment. Rotate the two tabs at the same time and at a fixed angle to adjust horizontal alignment.
Yoke ClampScrew
SPREAD
ROTATE
ROTATERED
BLUE
BLUE RED
Picture Purity & Convergence Adjustments
Document Number PD196-035 Rev 2 29 April 2003 Page 22
Center Convergence – continued 4. Adjust the two tabs of the 6-Pole
magnet to superimpose the red and blue lines with green. Adjust the angle between the two tabs for vertical line alignment. Rotate both magnet tabs at a fixed angle affects the horizontal line alignment.
5. The 4 and 6 pole magnets will interact. It may be necessary to repeat steps 3 and 4 until convergence is optimized.
Edge Convergence 1. Loosen the yoke clamp screw and
remove the three rubber positioning wedges. Connect a signal pattern generator and select a crosshatch pattern.
2. This adjustment will affect convergence
at the picture’s outside edges. Tilt the front of the deflection yoke up or down in a vertical direction. Adjust the tilt to provide overlay of the red, blue and green lines.
SPREAD
ROTATE
GRN
RED/BLUE
RED/BLUE GRN
Picture Purity & Convergence Adjustments
Document Number PD196-035 Rev 2 29 April 2003 Page 23
Edge Convergence – continued 3. Push a rubber wedge into the
space between the yoke and picture tube at the bottom location.
4. Tilt the yoke from side to side (left to right) to obtain better edge convergence.
5. Hold the yoke in position and put
two other wedges as shown at the 10 and 2 o’clock positions. After placing all three wedges, recheck overall convergence. Tighten the screw firmly to hold the yoke in position. Tape each wedge into position once convergence is finalized.
B G R
B G R
Power Supply Alignment
Document Number PD196-035 Rev 2 29 April 2003 Page
Power Supply Alignment The PDI-P9TV television utilizes a switch mode power supply to generate the following voltages.
SOURCE TV OFF TV ON B+ 12.5 VDC 10.5 VDC Audio Vcc 17.0 VDC 17.0 VDC IC82 0.0 VDC 8.0 VDC IC83 5.0 VDC 5.0 VDC IC85 3.3 VDC 3.3 VDC
B+ Alignment A frequency counter and voltmeter are required to align the power supply.
1. Connect an appropriate power supply to the TV and supply a standard color bar signal. Turn the TV ON. Allow the TV to warm for 15 minutes before making any adjustments.
2. Connect a frequency counter to IC81-pin 14 and measure the switch frequency. Adjust VR82 for a 30.6 Khz switch frequency. Adjustment to this frequency will greatly reduce any switch noise visible in the picture at low CATV RF input signal levels.
3. Connect a voltmeter to the TP2 and adjust VR81 to +10.5 VDC. Note: the TV must be turned ON, warmed up, and tuned to a stable color-bar signal to reliably set the B+ voltage.
IC81
VR81
VR82
C813
Safety Checks
Document Number PD196-035 Rev 2 29 April 2003 Page 25
Safety Checks Before returning the P9TV to service, the following safety checks should be performed.
1. PARTS PLACEMENT Confirm that the screws, parts, and wiring which were removed to allow servicing are put back in the original positions.
2. SWIVEL RESISTANCE TEST a. Expose the mounting swivel. b. Measure the DC resistance between
the input coax shield and swivel as shown. The resistance value should read greater than 800 K. A lesser reading indicates a possible insulation breakdown or short between the internal metal U-Bracket and chassis ground which could increase leakage currents touchable by the patient.
c. It is recommended that the reading of the swivel resistance be recorded as part of the service record.
3. AC LEAKAGE CURRENT TEST Following re-assembly of the P9TV always perform an AC Leakage Current Test. Use either an approved hospital leakage meter or the R-C network shown. a. Power the TV using an approved
external 28 VAC power supply. DO NOT USE A LINE ISOLATION TRANSFORMER DURING THIS TEST.
b. Connect one side of the R-C network to a good earth ground such as a water pipe, conduit, etc. Touch the other side of the R-C network to the top of the metal swivel.
c. Measure the AC voltage drop across the R-C network. The measured voltage must not exceed 0.10 volts RMS (100 millivolts RMS). This corresponds to 100 microamperes of AC current. Any value exceeding this limit constitutes a potential shock hazard and must be correct immediately.
d. Record the reading as part of the service record.
> 800 K
1,000 ohm
.15 MFD
< 100 millivolt
X-Ray Radiation Checks
Document Number PD196-035 Rev 2 29 April 2003 Page 26
X-Ray Radiation Checks Excessive high voltage can produce potentially hazardous X-Ray Radiation from this television’s picture tube. The high voltage must be maintained below 22.5 KV under all conditions. The normal high voltage value is typically 15.0 KV at maximum picture brightness (maximum beam current). Two methods are employed to verify correct operation of the high voltage circuit and shut-down circuit of this television.
HIGH VOLTAGE CHECK
WARNING: Lethal high voltage present during this measurement.
1. Supply a full color-bar input signal and power to the TV. With the television turned ON, verify the correct setting of the B+ is 10.5 VDC. See the manual section “Power Supply Alignment” for details.
2. Using a remote control, turn the Contrast and Brightness Controls to minimum. This will reduce the picture tube’s beam current (load) and cause the anode high voltage to reach its peak value.
3. Measure the anode high voltage. The voltage must be below 22.5 KV under any condition. It is recommended that the reading of the high voltage be recorded as part of the service record.
4. Using a remote control, adjust the brightness to both extremes and verify the high voltage does not exceed the 22.5 KV limit under any conditions.
HIGH VOLTAGE SHUT-DOWN CIRCUIT 1. With the television turned ON, verify the correct setting of the B+ is 10.5 VDC. See the
manual section “Power Supply Alignment” for details.
2. Using a small jumper wire, momentarily short the X and Y test point solder pads on the chassis located in the area below the flyback adjustment controls. The TV should shut down immediately indicating correct shutdown circuit operation.
3. The television should remain OFF until the power is interrupted. Restore power and resume normal TV operation.
X Y
Troubleshooting Troubleshooting
Document Number PD196-035 Rev 2 29 April 2003 Page 27
SYMPTOM – NO POWER ITEM CHECK DETAILS
1. Check for voltage on P801. Voltage should be within 18 to 35 VAC or 18 to 33 VDC.
a. Check the external power source. b. Check the input swivel coax cable for an
open center conductor. c. Check RF/PWR splitter. Replace if
necessary.
2. Check for voltage on C802. Voltage should be within the range 18 to 42 VDC.
a. Check and replace F802. b. Check diode bridge D801.
3. Check the voltage on C807.
Voltage should be approximately 13 to 15 VDC.
a. Check diode D802. b. Check switching transistor Q802. c. Check diode D807.
4. Check the low voltage output
regulators IC83 and IC85. COMPONENT TV OFF TV ON
IC83 4.9 VDC 4.9 VDC IC85 3.3 VDC 3.3 VDC
5. Check transistor Q811.
Check output rectifier diodes (cathode – banded side) D816 and D861.
COMPONENT TV OFF TV ON Q811 0 VDC 2.8 VDC D816 12.7 VDC 10.8 VDC D861 17 VDC 17 VDC
SYMPTOM – NO RASTER, FRONT LED IS ON ITEM CHECK DETAILS
1. +5V power supply. Check IC83 – pin 3 for +5 VDC.
2. System clock. Check IC51 – pin 64 for 12 mhz clocking pulse.
3. “POWER” signal. Check IC51 – pin 78 for “LOW” when front
power LED is ON.
4. Horizontal Pulse. Check IC51 – pin 30 for Horizontal pulse. Pulse should be 2.5V p-p.
5. Horizontal pulse present on base
of Q404 a. Check for voltage on C403 (12.7 VDC
OFF, 6.0V ON). b. Check for opened R403. c. Check for opened R030. d. Check for shorted Q402.
6. Horizontal pulse present on
collector of Q404. Replace Q404 if pulse is missing.
7. CRT supply voltage missing. a. Check IC91 pin 6 supply voltage.
b. Check for opened L901.
Troubleshooting Troubleshooting
Document Number PD196-035 Rev 2 29 April 2003 Page 28
8. CRT Driver Amp waveforms missing.
a. Check IC91 pins 1, 2, 3, for input waveforms.
b. Check IC91 pins 7, 8, 9 for output waveforms.
SYMPTOM – NO PICTURE, SOUND IS OK
ITEM CHECK DETAILS
1. CRT Driver Amp signals missing. a. Check IC91 pins 1, 2, 3, for input waveforms.
b. Check IC91 pins 7, 8, 9 for output waveforms.
2. IC51 RGB drive waveforms missing.
Check IC51 pins 56, 57, 58 for output RGB signals.
3. Missing IF signal. a. Check IF filter Z101 pin 1 for input 45.75
Mhz IF signal. b. Check IF Filter Z101 pin 4 and pin 5 for
output 45.75 Mhz IF signal.
4. Tuner IF signal missing. Check the tuner TU01 IF pin for output 45.75 Mhz signal.
SYMPTOM - NO SOUND, PICTURE IS OK
ITEM CHECK DETAILS
1. TV Mute control operation. Check R680 (Micro side) for proper control voltages.
MUTE ON MUTE OFF 2.62 0.0
2. Earphone “EARDET” signal. a. Remove earphone from earphone jack.
b. Check headphone jack EP51 Pin 9 for +3.3 VDC. Replace EP51 if Pin 9 reads 0.0 VDC without an earphone inserted into jack.
2. Check audio input of IC61. a. Set the TV’s volume to maximum. TV
Mute is OFF. b. Check IC81 pin 8 for 200 millivolt p-p
audio signal. Replace Q680 if audio signal is missing.
3. Check audio output of IC61. a. Set the TV’s volume to maximum. TV
Mute OFF. b. Check IC81 pin 9 for 10 volts p-p audio
signal.
4. Check IC51 for sound output. a. Set the TV’s volume to maxium. TV Mute OFF.
b. Check C049 for 4.0 V p-p audio signal.
5. Tuner IF signal missing. Check Tuner TU01 IF pin for signal.
Troubleshooting Troubleshooting
Document Number PD196-035 Rev 2 29 April 2003 Page 29
SYMPTOM – VERTICAL LINE ITEM CHECK DETAIL
1. Supply voltage to Vertical amp. a. Check IC31 pin 2 for 25VDC. b. If missing supply voltage, check R381
and D381.
2. Drive signal to Vertical Amp. a. Check IC31 pin 1 and 7 for drive pulse.
b. If, missing check Q391 and Q392.
3. Check vertical drive signal at IC51.
Check IC51 pin 16 and 17 for vertical drive pulse.
4. Check Horizontal pulse on IC51 a. Check IC51 pin 51 for H pulse.
b. Check Q402 and Q404 for H pulse.
Block Diagram
Document Number PD196-035 Rev 2 29 April 2003 Page 30
Block Diagram
RF/PWR SPLITTER
RF/POWER IN
TU01 TUNER
TECC1840PG32K
CATV RF
Z101SAW FILTER
K295OM
IF
D801BRIDGE
IC81/Q802SMPS
CONTROLLERTDA2262
T801XFMR
IC835V Reg
IC828 V Reg
IC853.3V Reg
+8V +5V+3.3V
IC51 TDA957X
PIF
SIF
VIDEO
CHROMA
DEF
IC01 EEPROM
24C08
I2C BUS
KEY
PAD
RM01IR
RCVR
IC61 AUDIO AMP
TDA1905 +17V
ON/OFF
T661ISO
XFMR
SPK
EP61 EARPHONE
T461FBT
B+ 10.5V
CRT
HV FOCUS SCREEN
IC91CRT DRIVERTDA6107Q
T401H-DRIVE
XFMR
Q404HOT
BU406
IC31VERTICALLA78040
YOK
E
+25V
135VHEATER
R, G, B
.680.0
0.0
TEST POINT NOTES1. TV audio thermometer set to 100% level (Maximum).
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
Indicates a critical safety component. Replace only with part number specified.
NCNCNC
SPK -SPK +
NCNC
AUDIO-INAUDIO-OUT
COMMON
EARDET
IC51
!
!
!
1/6W
R076100
3.3V
1/6WR0863.3K
3.3V
1/6WR0873.3K
C0480.01uF
1/6WR048
1K
1/6WR1647.5K
+16V
C680220uF
T681KSP-1053
12
P661
4
5
6
9
8
7
2
10
11
3
1
EP51HEADPHONE
TDA19051OUT2VCC3BOOTSTRAP4THRESHOLD5MUTING6INVERTIN7SVR8INPUT
14GND13GND12GND11GND10GND9GND
15GND
16GND
IC61
50V
C6870.1uF
+16V
C68347uF
+
50V
C684
3.3uF
+
50V
C685
10uF
+
50V
C686
2.2uF
1/6WR685220
1/6WR6822.2K
17V
Q680C319BY
+50V
C0490.47uF
C6800.01uF
C6890.01uF
+
16V
C6822200uF
76
MUTE
77
EARDET
48 MONO
17 VDCTP3
4.0 V p-p
TP1AUDIO
10 V p-p
TP2AUDIO
MUTE OFF 0.0 VTP4
MUTE ON 2.62 V
200 mv p-pTP5
1/2WRE91
220
1/6WR6861
1/6WR681
33k
1/6WR680
10k
1WR654
3.9
AUDIO
A PDI-P9TV
Date: 18 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
HEATER
BGRGNDIKVDDGNDNC
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
Indicates a critical safety component. Replace only with part number specified.!
D9101N4004
200V
C9020.27uF
+
250V
C9014.7uF
+
250VC903 4.7uF
+
250V
C9064.7uF
KAF9200
L90118uH
SCREEN
FOCUS
HV
1600V
C9042200pFSG94
1.5KV
SG991.5KV
SG981.5KVD909
BAV21D908BAV21
D907BAV21
1.5KR917
1W
1.5KR918
1W
1.5KR919
1W100R909
1/2W
100R908
1/2W
100R907
1/2W
(AXIAL)
C905470pF
MTZJ7.5BD905
100R901
100R902
D903
1N4148
D902
1N4148
D9011N4148
+
15V
C9931000uF
MTZJ128D993
+
50V
C99210uF
T3A6CI-FUCD991
RGP15JD992
250V
C9914.4uF
P991
123456789
H501
TDA6107
1 R 2 G 3 B 4 GND
5 IK
6 VDD
7 BO
8 GO
9 R0
IC91
100R903
SG971.5KV
25V PEAK
62 usec
130 VDCTP1
1.5V p-p
TP2RGB VIDEO
40 V p-p
TP3RGB VIDEO
130 VDCTP4
1/2WR910 2.2M
2W
R99133K
2W
R99318K
R99210K
CRT & DEGAUSSER
A PDI-P9TV
Date: 12 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
TESTPOINT KEY CLOSURE VOLTAGE A Power 0.0 ~ 0.4 A Volup 0.6 ~ 1.1 A Voldown 1.2 ~ 1.6 A Chup 1.8 ~ 2.4 B Chdown 0.0 ~ 0.4 B Mute 0.6 ~ 1.1 B CC 1.2 ~ 1.6 B Menu 1.8 ~ 2.4 C Hpdown 0.0 ~ 0.4 C Hpr 0.6 ~ 1.1 C Hpup 1.2 ~ 1.6 C Hpl 1.8 ~ 2.4
K0
K1
K2
MEMBRANE KEYPAD
HPLHPUPHPRHPDOWNMENUCCMUTECHDOWNCHUPVOLDOWN
POWERGND
IC51sm
VOLUP
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
C
B
A
321
5V
5V
5V
smR0073.3K
sm
R001100
smR0083.3K
sm
R002100
smR0093.3K
sm
R003100
HPL
HPR
HPUP
HPDOWN
MENU
CC
MUTE
CHDOWN
CHUP
VOLDOWN
VOLUP
POWER
123456789
10111213
KEYPAD
smRC111K
12345678910111213
P001
sm
RC121.6K
sm
RC132.4K
smRC211K
smRC221.6K
smRC232.4K
RC11K
RC21.6K
RC32.4K
DRAIN
C
B
A
KEYPAD
A PDI-P9TV
Date: 12 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
LM02
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
LM030.22uH
LM0110uH2 T
4 T6 T
2 T
sm
CM05680pF
sm
CM0447pF
sm
CM0347pF
RF/PWR IN
AC250VCM01
4700pF
AC250V
CM02.01uf
PM01
RCA JACK RF OUTACCESSORY RF
TUNER RF OUT
RM0191
RF/PWR SPLITTER
REV A PDI-P9TV
Date: 3 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
HEAT SINK
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
Indicates a critical safety component. Replace only with part number specified.
.445.90
0.0
23.5
0.00.0
2.151.50
8.0
3.82
3.17
3.19
.781.40
.95
!
1/2WR236470
1KVR31
1/2WR235270
D301
1N4148
+35V
C305
100uF
1/6W
R302510
+8V
1/6WR3934.7K
1/6WR3942.7K
C3198YQ392
D0171N4148
C0171000pF
L110uH
IC51, PIN 17 VDRA
50V
C311.01uF1/6W
R30313K
50VC3021000pF
1/6W
R30462K
1/6WR392390
+8V
C3198YQ381
L01610uH
C0161000pF
IC51, PIN 16 VDRB
+ 16VC3042200uF
1/2WR3091.5
1/6WR30791K
1/2WR308330
50V
C40510uF
KLN-2035L401
2
4
3
1
P401
1/6W
R44510K
X
BFS3565ALB14
+
16V
C403100uF
C4060.047uF
KTCD1028Q402
KLN-2023T401
ELC0607RAL403
BFS3565A0L404
2KV
C411680pFBU406
Q404HOT
400V
C4040.082uFRGP15J
D404
250V
C4810.1uF
9
8
4
5
2
3
1
6
10 HV
FOCUS
SCRN
11
7
T461DNFTCG-30U38
LA78040
1IN
V-IN
2VC
C3
P-UP
-OUT
4GN
D5
OUT
6S-
VSS
7N-
I-IN
IC1
36R404
IC51, PIN 30 HOUT
MTZJ8.2BD030
R030100
R0333.3K
+8V
+
35VC408
470uFFMU22SD408
+10.5V BFS3565A
LB14
+
16VC8461000uF
C8511000pF
AGP15JD281
+160V
C28133uF
UF-156D381
+
35V
C38133uF
1234P501+8V
D0551N4148
+ C0543.3uF
IC51, PIN 54 BCLIN
D4411N4148MTZJ12B
D442
Y
C4420.01uF
KTC3198YQ441
+8V
D4451N4148
sm
R032100K
+8V
smR034330
IC51, PIN 34 EHTO
sm
C0341000pF
+16V
C407
33uF
L407330uH
50V
C3080.27uF
50V
C315.0068uF
1/6WR306
43K1/6WR310
91K
+ 50VC3060.47uF
1/6WR311820
1/6WR3914.7K
!
135 VDCTP3
23 VDCTP4
62 usec
400 mv p-p
62 usec
5V p-p
50V p-p
16 usec
62 usec
800 mv p-p
62 usec
800 mv p-p
1/6WR016
1K
R402390
2W
R40347
R41056
R48210K
1/2WR381
27
R05020K1/6W
R0542.7K
1/6W
R053100K
1/2W
R906
.221/6WR441
1K
1/6W
R443390
1/2WR408
4.7
1/2W
R3051
SWEEP
A PDI-P9TV
Date: 24 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
IC51
VideoB-STOPSCLSDAGND
B-STOP
.955.75
.25
18IFIN1
19IFIN2
+3.3V
80
12345
P801
71
SCL
72
SDA
+3.3V +3.3V
+5V
25V
C1020.01uF
+
50V
C10110uF
smR111
100
sm
C022.0022uf
22AGCOUT
D1031N4148
+135V
C1840.01uF
+ C18310uFMTZJ33B
D181
+
50VC1074.7uF
M1958M
1 2 3 4 5
Saw FilterZ101
TECC1840
AGC
NC AS SCL
SDA
NC +5 +33V
IF2
IF1
TU01
+
10V
C181470uF
C1820.01uF
3IN
2
COM
1 OUT
IC86KIA78L05BP
+8V
50VC1610.01uF
KTC319BYQ161IF AMP
L1610.68uH
50V
C1630.01uF
+8V
50VC1650.01uF
24C08NC1
NC2
NC3
VSS
VCC
WC
SCL
SDAsm
IC1
smR112
100
5.0 VDCTP1
@ 0 dbmv
TP24.0 VDC
sm
R0903.3K
R080100
R06075
R071100
R072100
sm
R0814.7K
sm
R0824.7K
smR022680
1/6W
R10310K
1W
R18227K
sm
R105100
smR106100
1/6W
R11324K
1/6W
R104100K
OPR16175 1/6W
R1641K
1/6W
R1624.7K
1/6W
R16327
1/6W
R165330
1/6WR167220
Tuner & Memory
A PDI-P9TV
Date: 17 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
TEST CONDITIONSTV ON0 dbmv RF InputFull-Field Color Bar SignalMute OffService Level = Free
PIN VDC PIN VDC 1 5.00 41 0.00 2 5.00 42 3.32 3 5.00 43 0.00 4 0.00 44 0.32 5 0.00 45 0.00 6 0.02 46 3.65 7 0.00 47 2.95 8 2.29 48 3.38 9 7.83 49 2.96 10 5.00 50 3.97 11 2.66 51 2.53 12 3.78 52 2.54 13 0.00 53 2.54 14 0.00 54 1.76 15 0.00 55 5.50 16 0.00 56 3.12 17 4.31 57 3.05 18 0.02 58 3.15 19 1.85 59 3.23 20 3.84 60 0.10 21 3.69 61 3.27 22 2.74 62 0.00 23 0.19 63 1.58 24 0.19 64 1.68
25 0.00 65 0.00 26 2.22 66 3.11 27 2.49 67 4.58 28 3.72 68 0.07 29 3.72 69 0.06 30 0.33 70 0.02 31 0.53 71 4.60 32 2.21 72 4.66 33 2.21 73 0.11 34 0.94 74 0.01 35 2.41 75 0.00 36 0.35 76 2.62 37 3.20 77 2.46 38 3.20 78 0.05 39 7.82 79 0.00 40 3.88 80 3.25
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
+
16V
C041100uF
sm
C0390.1uF
L-PEA-AL03L039
smR038220
KTA1504-GRQ201
sm
R202180
L-PEA-AL03L201
5.6uH
sm
R204150
KTA1504-GRQ202
AXIAL
C0400.047uF
RL11560
R12110K
KTC319BYQL11
SLR114
DL21RED
MTZJ5.1BDL05
CL05.01uF
+ C03210uF
sm
C0341000pF
+8V
+8V
RL03330
RL02330
RL01330
Q4NPN
Q3NPN
Q2NPN
RL05100
+5V
SLR114
DL03RED
SLG114B
DL02GREEN
SLA114
DL01AMBER
+5V
R067100
+
10V
CM01100uF
sm
R0853.3K
smR0843.3K
smR075100
smR074100
smR073100
+5V
sm
R0824.7K
sm
R0814.7K
smR072100
smR071100
1/6W
R183.3K
R070100
R0793.3K
R069100
smC0671000pFMTZJ5.1B
D067
R077100
+
10V
C079100uF
sm
R0883.3K
R07810K
1/6WR080100
+3.3V
+8V
+3.3V
+3.3V
L066100uH
+
10VC065100uF
smC0660.01uF
smC042
0.047uF
smC044
0.1uF
smC046
0.1uF
smC0512200pF
smC052
2200pF
smC050
2200pF
D055
1N4148
1/6WR053100K
1/6W
R0542.7K
+C0543.3uF
smR055
10K
smR056
100sm
R057100
smC0590.022uF
+
16V
C06010uF
L-PEA-AL03
L059 10uH
+3.3V
+
16V
C06210uF
smC0610.022uF
L-PEA-AL03
L061 10uH
C06322pF
C064 22pF
X50112.000MHZ
1/6WR0863.3K
C0480.01uF
1/6WR048
1K
sm
C022
2200pF
smR020 39K
sm
C020
0.1uF
sm
R034330
smR032100K
smR011
3.3K
R006100
smR010
3.3K R005100
smR007
3.3K R001100
R003100
smR009
3.3K
R002100
smR008
3.3K
sm
C022.0022uf
+C015 1uF
+C019 10uFsm
C014 0.1uF+
C013
1uF
sm
C012
2200pF
sm
C011
2200pF
+16V
C0102.2uFsm
C0090.01uF
+
16V
C018100uFL-PEA-AL03
L00910uH sm
C008
0.22uF
R030100
sm
C0261200pFsm
C025330pF
MTZJ8.2BD030
R0333.3K
1/6WR0873.3K
1/6W
R076100
TDA9577
1 K0
2 K1
3 K2
4 GND
5 LED2
6 LED3
7 GND
8 SECPLL
9 BV
10DECOIG
11PHI2
12PHI1
13GND3
14DECBG
15AVL
16VDRB
17VDRA
18IFIN1
19IFIN2
20IREF
21VSCAP
22AGCOUT
23SIFIN1
24SIFIN2
26SN
DPLL
27AV
L/PEF
O/SN
DIF
28AU
DIO2
29AU
DIO3
30HO
UT
31FB
I/SNO
32DE
CSDE
M
33QS
SOUT
/AUD
EEM/
S
35EH
TO
35PL
LIF
36SI
FAGC
37QS
SOUT
38IF
VOUT
/CVB
SO
39VP
40CV
BS1 41GND
42CVBS2
43GND
44CVBS3/Y
45C
46WHSTA
47CVBSO
48AUDOUT/AMOUT
49IFVO2
50INSSW2
51R2/VIN
52G2/YIN
53B2/UIN
54BCLIN
55BLKIN
56ROUT
57GOUT
58BOUT
59VDDA
60VPE
61VDDC
62OSCGND
63XTALIN
64XTALOUT
65RS
T663.3
V67IR
68S-
MUTE
69H_
CLK70
LED1
71SC
L72SD
A73H_
DTA74
H_S_
REQ75
H_R_
REQ76
MUTE
77EA
R DE
T.
78PW
R7980B-
STOP
25GN
D
IC51
smR012
1.5K
smR058
100
3 VCC
2 GND
1 OUTRMCON
RM01
T4.5MhzZ201
sm
R035390
sm
C0350.1uF
+ C0362.2uF
sm
R48522k
smR48613K
R484470
C4820.1uF
MTZJ8.2BD481
sm
R201330
smR0903.3K
smR022
680
smR0263.9K
HEATE
8V
AV IN
LED2
BCLIN
EHTO
HOUT
LED3
LED2
LED1
IR
HSREQ
HRREQ
H DTA
SDA
SCL
LED1
H CKL
IR
EARDE
POWER
BSTOP
MONO
IK
RO
GOBO
MUTE
VDRB
VDRA
LED2
LED3
K2
K1
K0
00
MICRO-JUNGLE IC
REV A PDI-P9TV
Date: 25 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
B+ ADJUSTMENT
FREQUENCYADJUSTMENT
Indicates a critical safety component. Replace only with part number specified.
IC51
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
C8611000pF
!
!
!
R12110KR005
100
smR0103.3K
5 LED2KTC3198BY
QL11
SLR114DL21 POWER
smRL22560
5V3.3V
smR0883.3K
78 POWER R07810K
+8V
+3.3V C069.01uF
+
10VC068220uF
+3.3V
+5V
+5V
KTC319BYQ811
C844.01uF
+
16VC843470uF
+5V
+
16V
C841470uF
1IN
2COM
3OUT
IC83KIA78L05BP
C836.01uF
+
16V
C835470uF
+8V C838.01uF
+
16V
C837470uF
BFD3550AL835
+10.5V B+
+17V Audio_Vcc
500VC8242200pF
1/2WR820220K
UF-156D807
1/6WR8034.7
BFS3565AL805
MTZJ15AD802+
25VC807100uF
+
TANT
C8062.2uF
+
50V
C8022200uF
400VC803.022uF
P801 125V
F8024A
AC275V
C8040.1uF
GBU6KAC1
AC2
Plus
Minus
D2
400V
C818 .012uF
BFS3565AL804
Q802IRF640
AXIAL
C8021000pF
500VR82
1/6W
R80520K
100VC8121000pF
50V
C8081000pF
+ 50VC8090.47uF
+
50V
C8161uF
1/6WR816
18K
C8171000pF
500VR8150V
C810680pF
TEA2
262
1 IS
2 IN
3 Ima
x4 G
nd5 G
nd6 E 7 S 8 C
29
C110
C011
R012
Gnd13
Gnd14
Out15
V+16
Vcc
IC81
1/6WR8122.2K
KPW-1182
1
4
6
7
13
12
11
10
9
8
T1
250V
C811
2200pF
KAF-049L861
FML-G22S
D861
+
35V
C862470uF
C863.01uF
FML-G22S
D816
+
25V
C8134700uF
C822.01uF
C8211000pF
KAF-G084L812
AC275V
C8010.33uF
KRF-3022L801
KIA278RO81IN
4 ON/
OFF
3 GND
2OUT
IC82
KA78R331IN
4 ON/
OFF
3 GND
2OUT
IC85
!
30 VACTP1
+10.5 VDCTP2
15 VDCTP3
30.6 KhzTP4
+40 VDCTP5
1/6W
R87210K
1/2W
R87127
1/6W
R80447
2WR8012.2K
2WR80618
2WR80218
1/6WR818
1k
1W
R8100.22
1W
R8090.22
1W
R8080.22
1/6WR8172.4K
2WR80718
1/2W
R8114.7M
REVISIONS18FEB04 - TP2, TB5 Location Revised
B PDI-P9TV
Date: 21 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
Indicates a critical safety component. Replace only with part number specified.
NCGNDVDDIKGNDRGB
HEATER
PDI Communicaton Systems, Incorporated claims proprietary right to the material disclosed hereon. This drawing issued in confidence for servicing information only and may not be used to manufacture anything shown hereon. The information contained hereon is believed accurate, but is not warranted, and is subject to change without notice or obligation. Copyright 2003 by PDI. All rights reserved.
HEAT SINK
MEMBRANE KEYPAD
HPLHPUPHPRHPDOWNMENUCCMUTECHUPCHDOWNVOLUPVOLDOWNPOWERGND
EARDET
COMMON
AUDIO-OUTAUDIO-IN
NCNC
SPK +SPK -
NCNCNC
LM02
RF/PWR SPLITTER
VideoB-STOPSCLSDAGND
!
!
!
!
!
!
sm
R201330
MTZJ8.2BD481
C4820.1uF
R484470
smR48613K
sm
R48522k
+ C0362.2uF
sm
C0350.1uF
smR035390
D9101N4004
200V
C9020.27uF
+
250V
C9014.7uF
+
250VC903 4.7uF
+
250V
C9064.7uF
KAF9200
L90118uH
SCREEN
FOCUS
HV
1600V
C9042200pFSG94
1.5KV
SG991.5KV
SG981.5KVD909
BAV21D908BAV21
D907BAV21
1.5KR917
1W
1.5KR918
1W
1.5KR919
1W100R909
1/2W
100R908
1/2W
100R907
1/2W
(AXIAL)
C905470pF
MTZJ7.5BD905
100R901
100R902
D903
1N4148
D902
1N4148
D9011N4148
+
15V
C9931000uF
MTZJ128D993
+
50V
C99210uF
T3A6CI-FUCD991
RGP15JD992250V
C991
4.4uF
P991
123456789
H501
TDA6107
1 R 2 G 3 B 4 GND
5 IK 6 VDD
7 BO 8 GO
9 R0
IC91
100R903
SG971.5KV
T4.5MhzZ201
3 VCC
2 GND
1 OUTRMCON
RM01
smR058
100
smR012
1.5K
TDA9577
1 K0
2 K1
3 K2
4 GND
5 LED2
6 LED3
7 GND
8 SECPLL
9 BV
10 DECOIG
11 PHI2
12 PHI1
13 GND3
14 DECBG
15 AVL
16 VDRB
17 VDRA
18 IFIN1
19 IFIN2
20 IREF
21 VSCAP
22 AGCOUT
23 SIFIN1
24 SIFIN226
SNDP
LL
27AV
L/PEF
O/SN
DIF
28AU
DIO2
29AU
DIO3
30HO
UT
31FB
I/SNO
32DE
CSDE
M
33QS
SOUT
/AUD
EEM/
S
35EH
TO
35PL
LIF
36SI
FAGC
37QS
SOUT
38IF
VOUT
/CVB
SO
39VP
40CV
BS1 41GND
42CVBS2
43GND
44CVBS3/Y
45C
46WHSTA
47CVBSO
48AUDOUT/AMOUT
49IFVO2
50INSSW2
51R2/VIN
52G2/YIN
53B2/UIN
54BCLIN
55BLKIN
56ROUT
57GOUT
58BOUT
59VDDA
60VPE
61VDDC
62OSCGND
63XTALIN
64XTALOUT
65RS
T663.3
V67IR
68S-
MUTE
69H_
CLK70
LED1
71SC
L72SD
A73H_
DTA74
H_S_
REQ75
H_R_
REQ76
MUTE
77EA
R DE
T.78PW
R7980B-
STOP
25GN
D
IC51
LM030.22uH
LM0110uH2 T
4 T6 T
2 T
sm
CM05680pF
sm
CM0447pF
sm
CM0347pF
RF/PWR IN
AC250VCM01
4700pF
AC250V
CM02.01uf
PM01
RCA JACK RF OUTACCESSORY RF
TUNER RF OUT
1/6W
R076100
1/6WR0873.3K
1/6WR1647.5K
+16V
C680220uF
T681KSP-1053
12
P661
4
5
6
9
8
7
2
10
11
3
1
EP51HEADPHONE
TDA19051 OUT2 VCC3 BOOTSTRAP4 THRESHOLD5 MUTING6 INVERTIN7 SVR8 INPUT
14GND13GND12GND11GND10GND9GND
15GND
16GND
IC1
50V
C6870.1uF
+16V
C68347uF
+
50V
C684
3.3uF
+
50V
C685
10uF
+
50V
C686
2.2uF
1/6WR685220
1/6WR6822.2K
Q680C319BY
+50V
C0490.47uF
C6890.01uF
+
16V
C6822200uF
R0333.3K
MTZJ8.2BD030
sm
C025330pF
sm
C0261200pF
R030100
sm
C008
0.22uF
L-PEA-AL03
L00910uH
+
16V
C018100uF
smC0090.01uF
+16V
C0102.2uF
sm
C011
2200pF
sm
C012
2200pF+
C013
1uF
smC014 0.1uF
+C019 10uF+
C015 1uF
sm
C022.0022uf
D1031N4148
+135V
C1840.01uF
+ C18310uFMTZJ33B
D181
+
50V
C1074.7uF
M1958M
1 2 3 4 5
Z101
TECC1840
AGC
NC AS SCL
SDA
NC +5 +33V
IF2
IF1
TU01
+
10V
C181470uF
C1820.01uF
3IN
2
COM
1 OUT
IC86RIA78L05BP
50V
C1610.01uF
KTC319BYQ161
L1610.68uH
50V
C1630.01uF
+8V
50VC1650.01uF
+5V
smR008
3.3K R002100
smR009
3.3K R003100
HPL
HPR
HPUP
HPDOWN
MENU
CC
MUTENT
CHDOWN
CHUP
VOLDOWN
VOLUP
POWER
123456789
10111213
KEYPAD
smRC111K
12345678910111213
P2
sm
RC121.6K
sm
RC132.4K
smRC211K
smRC221.6K
smRC232.4K
RC11K
RC21.6K
RC32.4K
DRAIN
smR112
100
24C08NC1
NC2
NC3
VSS
VCC
WC
SCL
SDA
IC2
smR111
100
+
50V
C10110uF
25V
C1020.01uF
R001100
smR007
3.3K
R005100
smR010
3.3K
R006100
smR011
3.3K
+8V
C069.01uF
+
10V
C068220uF
+5V
KTC319BYQ811
C844.01uF
+
16VC843470uF
+
16V
C841470uF
1 IN
2
COM
3OUT
IC83KIA78L05BP
C836.01uF
+
16V
C835470uF
C838.01uF
+
16V
C837470uF
BFD3550AL835
+10.5V B+
+17V Audio_Vcc
500VC8242200pF
1/2WR820220K
UF-156D807
1/6WR418K
BFS3565AL805
MTZJ15AD802+
25VC807100uF
+
TANT
C8062.2uF
+
50V
C8022200uF
400VC803.022uF
P801 125V
F8024A
AC275V
C8040.1uF
GBU6KAC1
AC2
Plus
Minus
D2
400V
C818 .012uF
BFS3565AL804
Q802IRF640
AXIAL
C11000pF
500VR82
1/6W
R80520K
100VC8121000pF
50V
C8081000pF
+ 50V
C8090.47uF
+
50V
C8161uF
1/6WR816
18K
C8171000pF
500VRB150V
C810680pF
TEA2
262
1 IS
2 IN 3 Imax
4 Gnd
5 Gnd
6 E 7 S 8 C2
9C1
10C0
11R0
12Gn
d13Gn
d14Ou
t15V+
16Vc
c
IC81
1/6WR8122.2K
KPW-1182
1
4
6
7
13
12
11
10
9
8
T13
250V
C811
2200pF
KAF-049L861
FML-G22S
D861
+
35V
C862470uF
C863.01uF
FML-G22S
D1
+
25V
C8134700uF
C822.01uF
C8211000pF
KAF-G084L812
AC275V
C8010.33uF
KRF-3022L801
KIA278RO81 IN
4ON
/OFF
3GN
D
2OUT
IC82
KA78R331 IN
4 ON/
OFF
3 GND
2OUT
IC85
+8V
+5V
+3.3V
12345
P1
1/2WR236470
1KVR31
1/2WR235270
D301
1N4148
+35V
C305
100uF
1/6W
R302510
+8V
1/6WR13
4.7K
1/6WR3942.7K
C3198YQ392
D0171N4148
C0171000pF
L110uH
50V
C311.01uF1/6W
R1462K
50VC3021000pF
1/6W
R30462K
1/6WR392390
+8V
C3198YQ381
L01610uH
C0161000pF
+ 16VC3042200uF
1/2WR3091.5
1/6WR30791K
1/2WR308330
50V
C40510uF
KLN-2035L401
2
4
3
1
P401
1/6W
R44510K
X
BFS3565ALB14
+
16V
C403100uF
C4060.047uF
KTCD1028Q402
KLN-2023T401
ELC0607RAL403
BFS3565A0L404
2KV
C411680pFBU406
Q404
HOT400V
C4040.082uFRGP15J
D404
250V
C4810.1uF
9
8
4
5
2
3
1
6
10 HV
FOCUS
SCRN
11
7
T461DNFTCG-30U38
LA78040
1IN
V-IN
2VC
C3
P-UP
-OUT
4GN
D5
OUT
6S-
VSS
7N-
I-IN
IC3
36R404
+
35VC408
470uFFMU22SD408
BFS3565ALB1
+
16VC8461000uF
C8511000pF AGP15JD281
+
160V
C28133uF
UF-156D381
+
160V
C333uF
1234P501+8V
D4411N4148MTZJ12B
D442
Y
C4420.01uF
KTC3198YQ441
+8V
D4451N4148
sm
R032100K
sm
R034330
+16V
C407
33uF
L407330uH
50V
C3080.27uF
50V
C315.0068uF
1/6WR306
43K1/6WR310
91K
+ 50VC3060.47uF
1/6WR311820
1/6WR3914.7K
!
sm
C020
0.1uF
smR020 39K
sm
C022
2200pF
1/6WR048
1K C0480.01uF
C6800.01uF
1/6WR0863.3K
X50112.000MHZ
C064 22pF
C06322pF
L-PEA-AL03
L061 10uH
smC0610.022uF
+
16V
C06210uF
+3.3V
L-PEA-AL03
L059 10uH
+
16V
C06010uF
smC0590.022uF
smR057
100sm
R056100
smR055
10K
+C0543.3uF
1/6W
R0542.7K
1/6WR053100K
D055
1N4148
smC050
2200pF
smC052
2200pF
smC0512200pF
smC046
0.1uF
smC044
0.1uF
smC042
0.047uF
smC0660.01uF
+
10V
C065100uF
L066100uH
+3.3V
+3.3V
+8V
+3.3V
1/6W
R080100
R07810K
sm
R0883.3K
+
10V
C079100uF
R077100
MTZJ5.1BD067
smC0671000pF
R069100R0793.3K
R070100
1/6WR183.3K
smR071100
smR072100
sm
R0814.7K
sm
R0824.7K
+5V
smR073100
smR074100
smR075100
sm
R0843.3K
sm
R0853.3K
+
10V
CM01100uF
R067100
+5V
SLA114
DL01AMBER
SLG114B
DL02GREEN
SLR114DL03RED
+5V
RL05100
Q2NPN
Q3NPN
Q4NPN
RL01330
RL02330
RL03330
+8V
+8V
sm
C0341000pF
+ C03210uF
CL05.01uF
MTZJ5.1BDL05
SLR114
DL21RED
KTC319BYQL11
R12110K
RL11560
AXIAL
C0400.047uF
KTA1504-GRQ202
sm
R204150
L-PEA-AL03L201
5.6uH
sm
R202180
KTA1504-GRQ201
sm
R038220
L-PEA-AL03L039
smC0390.1uF
+
16V
C041100uF
1/2WR910 2.2M
2W
R99133K
2W
R99318K
R99210K
RM0191
1/2WRE91
220
1/6WR6861
1/6WR681
33k
1WR654
3.9
smR0263.9K
smR022
680
1/6W
R10310K
1W
R18227K
sm
R105100
smR106100
1/6W
R11324K
1/6W
R104100K
OPR16175 1/6W
R21K
1/6W
R1624.7K
1/6W
R16327
1/6W
R165330
1/6WR167220
smR0903.3K
1/6W
R87210K
1/2W
R87127
1/6W
R80447
2WR8012.2K
2WR80618
2WR80218
1/6WR818
1k
1W
R8100.22
1W
R8090.22
1W
R8080.22
1/6WR8172.4K
2W
R80718
1/2W
R8114.7M
R06075
1/6WR17
1K
R402390
2W
R40347
R41056
R48210K
1/2WR381
27
R05020K
1/2WR906
.221/6WR441
1K
1/6W
R443390
1/2WR408
4.7
1/2W
R3051
1/6W
R68010k
HEATE
8V
AV IN
VDRB
LED2
BCLIN
EHTO
MONO
EHTO HOUT
HOUT
K2
K1
K0
LED3
LED2
LED1
IR
HSREQ
HRREQ
H DTA
SDA
SCL
LED1
H CKL
IR
EARDE
POWER
BSTOP
MONO
IK
RO
GOBO
EARDE
MUTE
MUTE
VDRB
VDRA
VDRA
BCLIN
BSTOPSCLSDA
VIDEO
SDASCA
POWER
LED2
LED3
K2
K1
K0
00
REV A PDI-P9TV
Date: 25 MARCH 2003 Page: 1 of 1
Rev ID
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
E E
Component Pin-Outs
Document Number PD196-035 Rev 2 29 April 2003 Page 40
Component Pin-Outs IC81, TEA2262, Switch Mode Regulator
IC91, TDA6107Q, CRT Video Output Amplifier
IS
IN
Imax
GND
GND
E
S
C2
Vcc V+ OUT GND GND R0 C0 C1
1 2 3 4 5 6 7 8
16
15
14
13
12
11
10
9
1 2 3 4 5 6 7 8 9
PIN 1 Inverting Input 1 PIN 2 Inverting Input 2 PIN 3 Inverting Input 3 PIN 4 Gnd, Fin PIN 5 BCS – Output PIN 6 Supply Voltage PIN 7 Cathode Output 3 PIN 8 Cathode Output 2 PIN 9 Cathode Output 1
Component Pin-Outs
Document Number PD196-035 Rev 2 29 April 2003 Page 41
IC31, LA78040, Vertical Deflection Output
IC61, TDA1905, Audio Output Amp
1
2
3
4
5
6
7
PIN 1 INVERTING INPUT PIN 2 Vcc PIN 3 Pump Up Output Pin 4 GND Pin 5 Vertical Output Pin 6 Vcc for Output Amp Pin 7 Non Inv Input
OUTPUT
Vs
BOOTSTRAP
THRESHOLD
MUTING
INVERT IN
SVR
NON INVERT IN
GND GND GND GND GND GND GND GND
1 2 3 4 5 6 7 8
16
15
14
13
12
11
10
9
Component Pin-Outs
Document Number PD196-035 Rev 2 29 April 2003 Page 42
IC51, TDA9577, PIF, SIF, VIDEO, CROMA, DEF
TDA9577
1 K0
2 K1
3 K2
4 GND
5 LED2
6 LED3
7 GND
8 SECPLL
9 BV
10 DECOIG
11 PHI2
12 PHI1
13 GND3
14 DECBG
15 AVL
16 VDRB
17 VDRA
18 IFIN1
19 IFIN2
20 IREF
21 VSCAP
22 AGCOUT
23 SIFIN1
24 SIFIN2
26SN
DPLL
27AV
L/PEF
O/SN
DIF
28AU
DIO2
29AU
DIO3
30HO
UT
31FB
I/SNO
32DE
CSDE
M
33QS
SOUT
/AUD
EEM/
S
34EH
TO
35PL
LIF
36SI
FAGC
37QS
SOUT
38IF
VOUT
/CVB
SO
39VP
40CV
BS1 41GND
42CVBS2
43GND
44CVBS3/Y
45C
46WHSTA
47CVBSO
48AUDOUT/AMOUT
49IFVO2
50INSSW2
51R2/VIN
52G2/YIN
53B2/UIN
54BCLIN
55BLKIN
56ROUT
57GOUT
58BOUT
59VDDA
60VPE
61VDDC
62OSCGND
63XTALIN
64XTALOUT
65RS
T663.3
V67IR
68S-
MUTE
69H_
CLK70
LED1
71SC
L72SD
A73H_
DTA74
H_S_
REQ75
H_R_
REQ
76MU
TE
77EA
R DE
T.78PW
R7980B-
STOP
25GN
D
TDA9577
1 K0
2 K1
3 K2
4 GND
5 LED2
6 LED3
7 GND
8 SECPLL
9 BV
10 DECOIG
11 PHI2
12 PHI1
13 GND3
14 DECBG
15 AVL
16 VDRB
17 VDRA
18 IFIN1
19 IFIN2
20 IREF
21 VSCAP
22 AGCOUT
23 SIFIN1
24 SIFIN2
26SN
DPLL
27AV
L/PEF
O/SN
DIF
28AU
DIO2
29AU
DIO3
30HO
UT
31FB
I/SNO
32DE
CSDE
M
33QS
SOUT
/AUD
EEM/
S
34EH
TO
35PL
LIF
36SI
FAGC
37QS
SOUT
38IF
VOUT
/CVB
SO
39VP
40CV
BS1 41GND
42CVBS2
43GND
44CVBS3/Y
45C
46WHSTA
47CVBSO
48AUDOUT/AMOUT
49IFVO2
50INSSW2
51R2/VIN
52G2/YIN
53B2/UIN
54BCLIN
55BLKIN
56ROUT
57GOUT
58BOUT
59VDDA
60VPE
61VDDC
62OSCGND
63XTALIN
64XTALOUT
65RS
T663.3
V67IR
68S-
MUTE
69H_
CLK70
LED1
71SC
L72SD
A73H_
DTA74
H_S_
REQ75
H_R_
REQ
76MU
TE
77EA
R DE
T.78PW
R7980B-
STOP
25GN
D
Component Pin-Outs
Document Number PD196-035 Rev 2 29 April 2003 Page 43
Q404, BU406, HOT (HORIZONTAL OUTPUT TRANSISTOR)
1 2 3
PIN 1 Base PIN 2 Collector PIN 3 Emitter
Document Number PD196-035 Rev 2 29 April 2003 Page 44
Exploded View
39612042
11865896
11865899
11845620
11151161
11032386
11121221
11814896
39672013
11035316
11112294
11823023
11865859
11865903
PTPM05
PTPS01
1103541011845589
11032386
11035416 11845589
PDI-P9TV REV.ARef. Part # Description
C008 12752224T CHIP CERAMIC CAP, X7R 50V 0.22MF KC009 12752103T CHIP CERAMIC CAP, X7R 50V 0.01MF KC011 12752222T CHIP CERAMIC CAP, X7R 50V 2200PF KC012 12752222T CHIP CERAMIC CAP, X7R 50V 2200PF KC020 12752104T CHIP CERAMIC CAP, X7R 50V 0.1MF KC022 12752222T CHIP CERAMIC CAP, X7R 50V 2200PF KC025 12751331T CHIP CERAMIC CAP, COG 50V 330PF JC026 12752122T CHIP CERAMIC CAP, X7R 50V 1200PF KC034 12752102T CHIP CERAMIC CAP, X7R 50V 1000PF KC035 12752104T CHIP CERAMIC CAP, X7R 50V 0.1MF KC039 12752104T CHIP CERAMIC CAP, X7R 50V 0.1MF KC040 12752473T CHIP CERAMIC CAP, X7R 50V 0.047MF KC042 12752473T CHIP CERAMIC CAP, X7R 50V 0.047MF KC044 12752104T CHIP CERAMIC CAP, X7R 50V 0.1MF KC046 12752104T CHIP CERAMIC CAP, X7R 50V 0.1MF KC050 12752223T CHIP CERAMIC CAP, X7R 50V 0.022MF KC051 12752223T CHIP CERAMIC CAP, X7R 50V 0.022MF KC052 12752223T CHIP CERAMIC CAP, X7R 50V 0.022MF KC059 12752223T CHIP CERAMIC CAP, X7R 50V 0.022MF KC061 12752223T CHIP CERAMIC CAP, X7R 50V 0.022MF KC063 12751220T CHIP CERAMIC CAP, COG 50V 22PF JC064 12751220T CHIP CERAMIC CAP, COG 50V 22PF JC067 12752102T CHIP CERAMIC CAP, X7R 50V 1000PF KIC01 11118499T IC,EEPROM-8K AT24C08AN-10SI-2.7SMDIC51 11118490T IC. UOC TDA9577H/N1/AI (OTP) NT/ONQ201 11114464T CHIP TR, KTA1504S-GR-RTK (ASG) KECQ202 11114464T CHIP TR, KTA1504S-GR-RTK (ASG) KECR001 12873101T CHIP RES, 1/16W 100 OHM J(1608)R002 12873101T CHIP RES, 1/16W 100 OHM J(1608)R003 12873101T CHIP RES, 1/16W 100 OHM J(1608)R005 12873101T CHIP RES, 1/16W 100 OHM J(1608)R006 12873101T CHIP RES, 1/16W 100 OHM J(1608)R007 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R008 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R009 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R010 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R011 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R012 12873153T CHIP RES, 1/16W 15K OHM J(1608)R020 12873393T CHIP RES, 1/16W 39K OHM J (1608)R022 12873681T CHIP RES, 1/16W 680 OHM J(1608)R026 12873392T CHIP RES, 1/16W 3.9K OHM J(1608)R032 12873104T CHIP RES, 1/16W 100K OHM J(1608)R034 12873331T CHIP RES, 1/16W 330 OHM J(1608)R035 12873391T CHIP RES, 1/16W 390 OHM J (1608)R038 12873221T CHIP RES, 1/16W 220 OHM J (1608)
MAIN CHASSIS PTPM05
Page 45
PDI-P9TV REV.ARef. Part # Description
R055 12873103T CHIP RES, 1/16W 10K OHM J(1608)R056 12873101T CHIP RES, 1/16W 100 OHM J(1608)R057 12873101T CHIP RES, 1/16W 100 OHM J(1608)R058 12873101T CHIP RES, 1/16W 100 OHM J(1608)R070 12873101T CHIP RES, 1/16W 100 OHM J(1608)R071 12873101T CHIP RES, 1/16W 100 OHM J(1608)R072 12873101T CHIP RES, 1/16W 100 OHM J(1608)R076 12873101T CHIP RES, 1/16W 100 OHM J(1608)R080 12873101T CHIP RES, 1/16W 100 OHM J(1608)R081 12873472T CHIP RES, 1/16W 4.7K OHM J(1608)R082 12873472T CHIP RES, 1/16W 4.7K OHM J(1608)R086 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R087 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R089 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R090 12873332T CHIP RES, 1/16W 3.3K OHM J(1608)R105 12873101T CHIP RES, 1/16W 100 OHM J(1608)R106 12873101T CHIP RES, 1/16W 100 OHM J(1608)R111 12873101T CHIP RES, 1/16W 100 OHM J(1608)R112 12873101T CHIP RES, 1/16W 100 OHM J(1608)R201 12873331T CHIP RES, 1/16W 330 OHM J(1608)R202 12873181T CHIP RES, 1/16W 180 OHM J (1608)R203 12873151T CHIP RES, 1/16W 150 OHM J (1608)R204 12873151T CHIP RES, 1/16W 150 OHM J (1608)RC11 12873102T CHIP RES, 1/16W 1K OHM J(1608)RC12 12873162T CHIP RES, 1/16W 1.6K OHM J (1608)RC13 12873242T CHIP RES, 1/16W 2.4K OHM J(1608)RC21 12873102T CHIP RES, 1/16W 1K OHM J(1608)RC22 12873162T CHIP RES, 1/16W 1.6K OHM J (1608)RC23 12873242T CHIP RES, 1/16W 2.4K OHM J(1608)RC31 12873102T CHIP RES, 1/16W 1K OHM J(1608)RC32 12873162T CHIP RES, 1/16W 1.6K OHM J (1608)RC33 12873242T CHIP RES, 1/16W 2.4K OHM J(1608)RE92 12873000T CHIP RES, 1/16W 0 OHM J(1608)RE93 12873000T CHIP RES, 1/16W 0 OHM J(1608)C014 12477104T CERAMIC CAP, F 50V 0.1MF Z AXIALC016 12474102T CERAMIC CAP, B 50V 1000PF K AXIALC017 12474102T CERAMIC CAP, B 50V 1000PF K AXIALC048 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC066 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC069 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC102 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC161 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC163 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC165 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC182 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC184 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC442 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIAL
Page 46
PDI-P9TV REV.ARef. Part # Description
C482 12477104T CERAMIC CAP, F 50V 0.1MF Z AXIALC689 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC810 12474681T CERAMIC CAP, B 50V 680PF K AXIALC817 12474102T CERAMIC CAP, B 50V 1000PF K AXIALC820 12474102T CERAMIC CAP, B 50V 1000PF K AXIALC836 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC838 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC844 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALC871 12497103T CERAMIC CAP, F 25V 0.01MF Z AXIALD017 11115024T SILICON DIODE, 1N4148D030 11115638T ZD, MTZJ8.2B (VZ7.78-8.19) 0.5WD054 11115024T SILICON DIODE, 1N4148D080 11115623T ZD, MTZJ5.1B (VZ4.94-5.20) 0.5WD103 11115024T SILICON DIODE, 1N4148D181 11115686T ZD, MTZJ33B (VZ30.32-31.88) 0.5WD281 11115444T DIODE, RGP15JD301 11115003T SILICON DIODE, 1N4004D381 11115458T DIODE, FAST RECOVERY UF-156D404 11115444T DIODE, RGP15JD441 11115024T SILICON DIODE, 1N4148D442 11115651T ZD, MTZJ12B (VZ11.44-12.03) 0.5WD445 11115024T SILICON DIODE, 1N4148D481 11115638T ZD, MTZJ8.2B (VZ7.78-8.19) 0.5WD802 11115656T ZD, MTZJ15A (VZ13.44-14.13) 0.5WD807 11115458T DIODE, FAST RECOVERY UF-156D808 11115458T DIODE, FAST RECOVERY UF-156D861 11115458T DIODE, FAST RECOVERY UF-156L009 11237100T COIL, AXIAL LAL02TB 10UH KL016 11237100T COIL, AXIAL LAL02TB 10UH KL017 11237100T COIL, AXIAL LAL02TB 10UH KL039 11237100T COIL, AXIAL LAL02TB 10UH KL059 11237100T COIL, AXIAL LAL02TB 10UH KL061 11237100T COIL, AXIAL LAL02TB 10UH KL066 11237101T COIL, AXIAL LAL02TB 100UH JL161 11237688T COIL, AXIAL LAL02TB 0.68UH KL201 11237569T COIL, AXIAL LAL02TB 5.6UH KL404 11103041T B-CORE, BF40 BTL3.5*7B (BFS 3565AO)L407 11248331T COIL, AXIAL LAL03TB 330UH KL804 11103041T B-CORE, BF40 BTL3.5*7B (BFS 3565AO)L805 11103041T B-CORE, BF40 BTL3.5*7B (BFS 3565AO)L813 11103041T B-CORE, BF40 BTL3.5*7B (BFS 3565AO)L814 11103041T B-CORE, BF40 BTL3.5*7B (BFS 3565AO)L835 11103041T B-CORE, BF40 BTL3.5*7B (BFS 3565AO)L861 11103041T B-CORE, BF40 BTL3.5*7B (BFS 3565AO)R016 12368101T CARBON RESISTOR, SB 1/6W 100 OHM JR030 12368101T CARBON RESISTOR, SB 1/6W 100 OHM JR031 12368101T CARBON RESISTOR, SB 1/6W 100 OHM J
Page 47
PDI-P9TV REV.ARef. Part # Description
R033 12368302T CARBON RESISTOR, SB 1/6W 3K OHM JR048 12368102T CARBON RESISTOR, SB 1/6W 1K OHM JR050 12368203T CARBON RESISTOR, SB 1/6W 20K OHM JR053 12368104T CARBON RESISTOR, SB 1/6W 100K OHM JR054 12368272T CARBON RESISTOR, SB 1/6W 2.7K OHM JR060 12368750T CARBON RESISTOR, SB 1/6W 75 OHM JR067 12368101T CARBON RESISTOR, SB 1/6W 100 OHM JR078 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JR088 12368332T CARBON RESISTOR, SB 1/6W 3.3K OHM JR103 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JR104 12368104T CARBON RESISTOR, SB 1/6W 100K OHM JR113 12368243T CARBON RESISTOR, SB 1/6W 24K OHM JR121 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JR162 12368472T CARBON RESISTOR, SB 1/6W 4.7K OHM JR163 12368270T CARBON RESISTOR, SB 1/6W 27 OHM JR164 12368102T CARBON RESISTOR, SB 1/6W 1K OHM JR165 12368331T CARBON RESISTOR, SB 1/6W 330 OHM JR167 12368221T CARBON RESISTOR, SB 1/6W 220 OHM JR302 12368511T CARBON RESISTOR, SB 1/6W 510 OHM JR303 12368133T CARBON RESISTOR, SB 1/6W 13K OHM JR304 12368623T CARBON RESISTOR, SB 1/6W 62K OHM JR305 12321109T OXIDE RESISTOR, B 1/2W 1 OHM JR306 12368433T CARBON RESISTOR, SB 1/6W 43K OHM JR307 12368913T CARBON RESISTOR, SB 1/6W 91K OHM JR308 12321331T OXIDE RESISTOR, B 1/2W 330 OHM JR309 12321159T OXIDE RESISTOR, B 1/2W 1.5 OHM JR310 12368913T CARBON RESISTOR, SB 1/6W 91K OHM JR311 12368821T CARBON RESISTOR, SB 1/6W 820 OHM JR325 12321471T OXIDE RESISTOR, B 1/2W 470 OHM JR326 12321241T OXIDE RESISTOR, B 1/2W 240 OHM JR381 12321279T OXIDE RESISTOR, B 1/2W 2.7 OHM JR391 12368472T CARBON RESISTOR, SB 1/6W 4.7K OHM JR392 12368391T CARBON RESISTOR, SB 1/6W 390 OHM JR393 12368472T CARBON RESISTOR, SB 1/6W 4.7K OHM JR394 12368272T CARBON RESISTOR, SB 1/6W 2.7K OHM JR402 12368391T CARBON RESISTOR, SB 1/6W 390 OHM JR404 12368360T CARBON RESISTOR, SB 1/6W 36 OHM JR408 12321479T OXIDE RESISTOR, B 1/2W 4.7 OHM JR410 12368560T CARBON RESISTOR, SB 1/6W 56 OHM JR441 12368102T CARBON RESISTOR, SB 1/6W 1K OHM JR442 12368912T CARBON RESISTOR, SB 1/6W 9.1K OHM JR443 12368391T CARBON RESISTOR, SB 1/6W 390 OHM JR445 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JR482 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JR484 12368471T CARBON RESISTOR, SB 1/6W 470 OHM JR485 12368223T CARBON RESISTOR, SB 1/6W 22K OHM JR680 12368103T CARBON RESISTOR, SB 1/6W 10K OHM J
Page 48
PDI-P9TV REV.ARef. Part # Description
R681 12368333T CARBON RESISTOR, SB 1/6W 33K OHM JR682 12368222T CARBON RESISTOR, SB 1/6W 2.2K OHM JR684 12368752T CARBON RESISTOR, SB 1/6W 7.5K OHM JR685 12368221T CARBON RESISTOR, SB 1/6W 220 OHM JR686 12368109T CARBON RESISTOR, SB 1/6W 1 OHM JR803 12368479T CARBON RESISTOR, SB 1/6W 4.7 OHM JR804 12368470T CARBON RESISTOR, SB 1/6W 47 OHM JR805 12368223T CARBON RESISTOR, SB 1/6W 22K OHM JR808 12977228T RES, NKN1WSJT-52 0R22 OHM (PRN)R809 12977228T RES, NKN1WSJT-52 0R22 OHM (PRN)R810 12977228T RES, NKN1WSJT-52 0R22 OHM (PRN)R811 12005475T METAL FILM RES(VDE),1/2W 4.7M OHMR812 12368222T CARBON RESISTOR, SB 1/6W 2.2K OHM JR813 12368220T CARBON RESISTOR, SB 1/6W 22 OHM JR814 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JR816 12368183T CARBON RESISTOR, SB 1/6W 18K OHM JR817 12368242T CARBON RESISTOR, SB 1/6W 2.4K OHM JR818 12368102T CARBON RESISTOR, SB 1/6W 1K OHM JR820 12919224T CARBON RESISTOR, SB 1/2W 220K OHM JR871 12321270T OXIDE RESISTOR, B 1/2W 27 OHM JR872 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JR906 12321228T OXIDE RESISTOR, B 1/2W 0.22 OHM JRE91 12321221T OXIDE RESISTOR, B 1/2W 220 OHM JRL01 12368331T CARBON RESISTOR, SB 1/6W 330 OHM JRL02 12368331T CARBON RESISTOR, SB 1/6W 330 OHM JRL03 12368331T CARBON RESISTOR, SB 1/6W 330 OHM JRL11 12368101T CARBON RESISTOR, SB 1/6W 100 OHM JC010 12797229T CHEMICON, 50V 2.2MF 85C 5*11C013 12797109T CHEMICON, 50V 1MF 85C 5*11C015 12797109T CHEMICON, 50V 1MF 85C 5*11C018 12794101T CHEMICON, 16V 100MF 85C 6.3*11C019 12797100T CHEMICON, 50V 10MF 85C 5*11C032 12797100T CHEMICON, 50V 10MF 85C 5*11C036 12797229T CHEMICON, 50V 2.2MF 85C 5*11C041 12794101T CHEMICON, 16V 100MF 85C 6.3*11C049 12797478T CHEMICON, 50V 0.47MF 85C 5*11C053 12797478T CHEMICON, 50V 0.47MF 85C 5*11C054 12797479T CHEMICON, 50V 4.7MF 85C 5*11C060 12797100T CHEMICON, 50V 10MF 85C 5*11C062 12797100T CHEMICON, 50V 10MF 85C 5*11C065 12793101T CHEMICON, 10V 100MF 85C 5*11C068 12793221T CHEMICON, 10V 220MF 85C 6.3*11C079 12793101T CHEMICON, 10V 100MF 85C 5*11C101 12797100T CHEMICON, 50V 10MF 85C 5*11C107 12797479T CHEMICON, 50V 4.7MF 85C 5*11C181 12793471T CHEMICON, 10V 470MF 85C 8*12C183 12797470T CHEMICON, 50V 47MF 85C 6.3*11
Page 49
PDI-P9TV REV.ARef. Part # Description
C302 12692102T PLASTIC CAPACITOR, M 50V 1000PF JC305 12796101T CHEMICON, 35V 100MF 85C 8*12C306 12797478T CHEMICON, 50V 0.47MF 85C 5*11C311 12692103T PLASTIC CAPACITOR, M 50V 0.01MF JC315 12692223T PLASTIC CAPACITOR, M 50V 0.022MF JC403 12794101T CHEMICON, 16V 100MF 85C 6.3*11C406 12692473T PLASTIC CAPACITOR, M 50V 0.047MF JC407 12796330T CHEMICON, 35V 33 MF 85C 5*11C680 12797228T CHEMICON, 50V 0.22MF 85C 5*11C683 12794470T CHEMICON, 16V 47MF 85C 5*11C684 12797339T CHEMICON, 50V 3.3MF 85C 5*11C685 12797100T CHEMICON, 50V 10MF 85C 5*11C686 12797229T CHEMICON, 50V 2.2MF 85C 5*11C687 12692104T PLASTIC CAPACITOR, M 50V 0.1MF JC688 12794221T CHEMICON, 16V 220MF 85C 8*12C806 12576229T TA SOLID CAPACITOR, 25V 2.2MF KC807 12795101T CHEMICON, 25V 100MF 85C 6.3*11C808 12692102T PLASTIC CAPACITOR, M 50V 1000PF JC809 12797478T CHEMICON, 50V 0.47MF 85C 5*11C815 12797479T CHEMICON, 50V 4.7MF 85C 5*11C816 12797109T CHEMICON, 50V 1MF 85C 5*11C821 12214102T CERAMIC CAPACITOR, B 500V 1000PF KC822 12232103T CERAMIC CAPACITOR, F 50V 0.01MF ZC824 12214222T CERAMIC CAPACITOR, B 500V 2200PF KC835 12683471T CHEMICON, 16V 470MF SHL,SD (8*11.5)C837 12683471T CHEMICON, 16V 470MF SHL,SD (8*11.5)C847 12683471T CHEMICON, 16V 470MF SHL,SD (8*11.5)C851 12214102T CERAMIC CAPACITOR, B 500V 1000PF KC861 12214102T CERAMIC CAPACITOR, B 500V 1000PF KC863 12232103T CERAMIC CAPACITOR, F 50V 0.01MF ZCM01 12793101T CHEMICON, 10V 100MF 85C 5*11F802A 11165037T HOLDER, FUSE 5.2 (TAPPING)IC86 11119387T IC, REGU. 150[㎃] KIA78L05BPL403 11261021T COIL, ELC0607RA-1R0K (KRF9229)Q161 11114066T TR, KTC388A-TM (KTC3197)Q391 11114056T TR, KTC1815-Y (KTC3198-Y)Q392 11114056T TR, KTC1815-Y (KTC3198-Y)Q402 11114648T TR, KTD1028-AQ441 11114056T TR, KTC1815-Y (KTC3198-Y)Q680 11114056T TR, KTC1815-Y (KTC3198-Y)Q811 11114056T TR, KTC1815-Y (KTC3198-Y)QL01 11114323T TR, BRT KRC1201 (KRC101M)QL02 11114323T TR, BRT KRC1201 (KRC101M)QL03 11114323T TR, BRT KRC1201 (KRC101M)QL11 11114056T TR, KTC1815-Y (KTC3198-Y)Z201 11107013T C/TRAP,TPSRA4M50C00-A0( MURATA)C021 12095062T P/ CAP, 250V 0.1MF J TNU
Page 50
PDI-P9TV REV.ARef. Part # Description
C281 12799330T CHEMICON, 160V 33MF 85C 10*20C304 12794222T CHEMICON, 16V 2200MF 85C 13*25C308 12692274T PLASTIC CAPACITOR, M 50V 0.27MF JC381 12796331T CHEMICON, 35V 330MF 85C 10*16C408 12796471T CHEMICON, 35V 470MF 85C 10*20C411 12211681T CERAMIC CAPACITOR, B 2KV 680PF KC481 12095062T P/ CAP, 250V 0.1MF J TNUC682 12087017T CHEMICON, 25V 2200UF SMG(12.5*25)C841 12794102T CHEMICON, 16V 1000MF 85C 10*20C843 12793102T CHEMICON, 10V 1000MF 85C 10*16C846 12794102T CHEMICON, 16V 1000MF 85C 10*20C862 12795471T CHEMICON, 25V 470MF 85C 10*16VR31 12061630T CARBON-VR, 0.2W B 1K OHM FBVR81 12061629T CARBON-VR, 0.2W B 500 OHM FBVR82 12061633T CARBON-VR, 0.2W B 5K OHM FBC404 12834823B P/ CAP, T 400V 0.082MF K PFUC405 12085049S CHEMICON,KSA 105C 50V 4.7UF 16*35.5C801 12095214C PLASTIC CAP, RE-334C AC275V0.33MF KC802 12666222S CHEMI CON,105C 50V 2200MF KMEC803 12095207B CERA-CAPA, DA2GYE222MK617 NKC804 12095170B PLASTIC CAP, PCX2335 AC275V 0.1MF MC811 12095207B CERA-CAPA, DA2GYE222MK617 NKC812 12095147B MICA CAP, DM15F 100V 1000PF JC813 12702222T CHEMICON,25V 2200MF KMG,RD 12.5*25C818 12829123B PLASTIC CAPACITOR, T 400V 0.012MF JD408Z 150420040 DIODE, ASS'Y FMU22S 10FKD408 11115495 DIODE, SWITCHING FMU22SD408A 11865514 HEAT SINK, I-TYPE CT14CE (30MM)D408B 11032382 SCREW, TTB 3*10 SZND801 11115737 DIODE, GBU6K BRIDGED816Z 150420038 DIODE, ASS'Y D10LC20U 10AJD816 11115554 DIODE, D10LC20U-4004 (TWIN FRD)D816A 11865591 HEAT SINK, 10AFD816B 11032382 SCREW, TTB 3*10 SZNDL01 11113003 LED, SLR124 REDΦ3 DIFF. ST-LESSDL02 11113029 LED, SLG124B GREENΦ3 DIFF. ST-LESSDL03 11113206 LED, SLO-124(AMBER)DL03A 11823024 LED BRKT(3), 10HPDL21 11113003 LED, SLR124 REDΦ3 DIFF. ST-LESSDL21A 11826974 LED HOLDER(3Φ)EP61 11163209 JACK, ST-323-01F802 11144205 FUSE, 250V T4A 218004 K/S/V/R/B/T/CIC31Z 150500494 HEAT SINK, ASS'Y LA78040 10HPIC31 11118463 IC, VERTICAL LA78040IC31A 11865857 HEAT SINK, 14B1J (45MM)IC31B 11032382 SCREW, TTB 3*10 SZNIC61 11119659 IC, TDA1905 (PD16) AUDIO(5W) STM
Page 51
PDI-P9TV REV.ARef. Part # Description
IC81 11119660 IC, SMPS CONTROL TEA2262IC82Z 150500499 HEAT SINK, ASS'Y KIA278R08 10HPIC82 11118484 IC REGU KIA278R08PI-U 2A/8V KECIC82A 11865514 HEAT SINK, I-TYPE CT14CE (30MM)IC82B 11032382 SCREW, TTB 3*10 SZNIC83 11119282 IC, REGU. 1[A] KIA7805PI(7805API)IC85 11118370A IC, KIA78R33API 1A/3.3V PIN4 KECL401 11222001 COIL, LIN KLN2035 4.8UH (DR 8*11)L801 11211043 COIL, LINEFILTER KRF-3022L812 11251065 COIL, CHOKE KRF-G049(100UH)L812 C1251065 COIL, CHOKE CKRF-G049(100UH)P001 11164928 PLUG, WAFER YFW254-13P401 11164391 PLUG, YFW500-04P501A 11164124 PLUG, 5P 5267-05AXP501B 11164123 PLUG, 4P 5267-04AXP661 11164121 PLUG, 2P 5267-02AXP801 11164034 PLUG, 2P LARGE 5289-2A 7.5MMPB01 11164124 PLUG, 5P 5267-05AXQ404Z 150500307 HEAT SINK, ASS'Y BU406 06AEQ404 11114223 TR, HORIZONTAL BU406 (TO-220) FSCQ404A 11865594 HEAT SINK(X-TYPE) 06AEQ404B 11032382 SCREW, TTB 3*10 SZNQ802Z 150500504 HEAT SINK, ASS'Y IRFS640B 10HPQ802 11114646 TR, FET IRFS640BQ802A 11865601 HEAT SINK, 4PIN 14VHQ802B 11032382 SCREW, TTB 3*10 SZNQ802D 11103054A BEAD CORE, L6 RH 3.5*5*1.3Q802E 11962001 BOND, SCREW LOCKR182 12322273S OXIDE RESISTOR, B 1W 27K OHM JR403 12323470S OXIDE RESISTOR, B 2W 47 OHM JR664 12322339S OXIDE RESISTOR, B 1W 3.3 OHM JR801 12323222S OXIDE RESISTOR, B 2W 2.2K OHM JR802 12323180S OXIDE RESISTOR, B 2W 18 OHM JR806 12323180S OXIDE RESISTOR, B 2W 18 OHM JR807 12323180S OXIDE RESISTOR, B 2W 18 OHM JT401 11224037 TRANS, H.D.T KLN-2023T461 11226248 FBT MCK-10A01ZT661 11216011 TRANS, SPEAKER KSP-1053T801 11213404 TRANS,SMPS KPW-1182 10HP300TU01 11121231 TUNER,TECC1840PG32K NT 5V IIC RCAX501 11153025A CRYSTAL, 12.000000MHZ 16PF-FD HC 13Z101 11107146 SAW FILTER, M1958M NTSC(45.75MHZ)ZB01 11132042 RX MODULE, RM-1
CRT, PTPS01
Page 52
PDI-P9TV REV.ARef. Part # Description
C905 12474471T CERAMIC CAP, B 50V 470PF K AXIALD901 11115024T SILICON DIODE, 1N4148D902 11115024T SILICON DIODE, 1N4148D903 11115024T SILICON DIODE, 1N4148D905 11115635T ZD, MTZJ7.5B (VZ7.07-7.45) 0.5WD907 11115710T DIODE, BAV21 (AMMO-52MM) PHILIPSD908 11115710T DIODE, BAV21 (AMMO-52MM) PHILIPSD909 11115710T DIODE, BAV21 (AMMO-52MM) PHILIPSD910 11115003T SILICON DIODE, 1N4004D992 11115444T DIODE, RGP15JD993 11115651T ZD, MTZJ12B (VZ11.44-12.03) 0.5WR901 12368101T CARBON RESISTOR, SB 1/6W 100 OHM JR902 12368101T CARBON RESISTOR, SB 1/6W 100 OHM JR903 12368101T CARBON RESISTOR, SB 1/6W 100 OHM JR907 12321101T OXIDE RESISTOR, B 1/2W 100 OHM JR908 12321101T OXIDE RESISTOR, B 1/2W 100 OHM JR909 12321101T OXIDE RESISTOR, B 1/2W 100 OHM JR910 12919225T CARBON RESISTOR, SB 1/2W 2.2M OHM JR917 12321152T OXIDE RESISTOR, B 1/2W 1.5K OHM JR918 12321152T OXIDE RESISTOR, B 1/2W 1.5K OHM JR919 12321152T OXIDE RESISTOR, B 1/2W 1.5K OHM JR992 12368103T CARBON RESISTOR, SB 1/6W 10K OHM JC992 12797100T CHEMICON, 50V 10MF 85C 5*11L902 11261020T COIL, ELC0607RA-180K(KRF9200)SG94 11140027T SPARK GAP, 1.5KV SSG-152-A1SG97 11140027T SPARK GAP, 1.5KV SSG-152-A1SG98 11140027T SPARK GAP, 1.5KV SSG-152-A1SG99 11140027T SPARK GAP, 1.5KV SSG-152-A1C901 12700479T CHEMICON, 250V 4.7MF SMS,SG (10*13C902 12095062T P/ CAP, 250V 0.1MF J TNUC903 12700479T CHEMICON, 250V 4.7MF SMS,SG (10*13C904 12094210T CERA-CAPA, DM3DYB222K725 (2KV2200)C906 12700479T CHEMICON, 250V 4.7MF SMS,SG (10*13C993 12794102T CHEMICON, 16V 1000MF 85C 10*20C991 12095133B P/ CAP, 250V 4.4MF TNUD991 11114637 TRIAC, T3A6CI-FUCH501 300924035C HARNESS, 9P 350MM (5264-5395)IC91Z 150500493 HEAT SINK, ASS'Y TDA6107JR 10GNIC91 11118138B IC, VIDEO AMP TDA6107JF/N3 PHILIPSIC91A 11865543 HEAT SINK,(PLATE) (30MM)IC91B 11032381 SCREW, TTB 3*8 SZNP991 11164595 PLUG, 2P YPW500-2R991 12323333S OXIDE RESISTOR, B 2W 33K OHM JR993 12323183S OXIDE RESISTOR, B 2W 18K OHM JV901A C1116392 SOCKET CRT, GZS8-6-FD(14) 28MM
Page 53
PDI-P9TV REV.ARef. Part # Description
K001 152002656 CABINET, P9TVK101D 11814896 KEY MEMBRANE, MTI-10-1357 P9TVK102 11865903 SWIVEL SUB ASS'Y P9TVK102A 11865897 SWIVEL SUBK102B 11865895 HANGER BRKT SUBK102C 11865902 HEX BOLT 1/4"-20*2"K102D 11865899 1/8"CLEAR LEXAN WASHERK102E 11865900 1/8" STEEL WASHERK102F 11865901 1/4"-20 LOCK NUTK102G 11858470 RUBBER, PROTECTK102H 11865896 SPILT BRKTK102I 11121221 MODULE, 10FM300 DC/RF MPX SPLITTERK102J 11845620 PVC SHEETK102K 11032386 SCREW, TTBW 3*6 SZNK102L 11035410 SCREW, BTB 4*10 SZNK102M 11845589 SCREW GROMMET (EG-2-01)M002 11177152 COAXAL CABLE, (P-F 210MM)M801 300275623A HARNESS, 2P 230MM(5239-5239)K103 11823023 GUIDE RAIL, P9TVK103A 11037312 SCREW, BTBW 3*12 SZNK104 11957459A LABEL, WARNING SERVICE CT14CE3LUK109 152300244 SPEAKER SYSTEM, SPK1203 P9TVM661 300225220 HARNESS, 2P 200MM (5264- )W661 11151161 SPEAKER, SPK1203 70*40MM 8 OHMW661 C1151161A SPEAKER, CSPK1203 70*40MM 8 OHMK109A 11037312 SCREW, BTBW 3*12 SZNK110 11037312 SCREW, BTBW 3*12 SZNL901 11200050A COIL, DEGAUS, KSB-2172A 10" YEONHOV901 11112294 CPT, SAMSUNG A23KQU22X01V901B 3700171001 CRT EARTH ASS'Y, 9BGV901C 11035416 SCREW, BTB 4*16 SZN
K411 39672013 BACK COVER BODY, ASS'Y(V0) P9TVK412 11035316 SCREW, BTB 3*16 SZNK413 11957972 LABEL, GUIDE (120*26) 10FK3SCK414 11902578 LABEL, B/C NAME 10FM3SCK415 11902579 LABEL, WARNING P9TVK416 11902580 LABEL, SET NUMBER P9TVK417 11858471 RUBBER, SEAL 10HP
BACK COVER ASSEMBLY
CABINET
FRONT, ASSEMBLY
Page 54
Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 www.pdiarm.com email: [email protected] PH: 937-743-6010 FX: 937-743-5664
PDI-P9TV Rev. 2 Service ManualDocument Number: PD196-035 Rev 2
$35.00