pentek high-speed recording systems … talon ® high-speed recording systems: ... telecom and...
TRANSCRIPT
Talon High-SpeedRecording Systems
www.pentek.com
MODEL DESCRIPTION
Talon Talon® High-Speed Recording Systems: Flexible and Deployable SolutionsRTS 2706 Eight-Channel RF/IF 200 MS/sec Rackmount RecorderRTS 2709 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/sec Rackmount RecorderRTS 2715 Two-Channel Ten-Gigabit Ethernet Rackmount RecorderRTS 2716 Eight-Channel Serial FPDP Rackmount RecorderRTR 2726 Four-Channel RF/IF 200 MS/sec Rugged Portable RecorderRTR 2736 Eight-Channel Serial FPDP Rugged Portable RecorderRTR 2746 Eight-Channel RF/IF 200 MS/sec Rugged Rackmount RecorderRTR 2749 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/sec Rugged Rackmount RecorderRTR 2755 Two-Channel Ten-Gigabit Ethernet Rugged Rackmount RecorderRTR 2756 Eight-Channel Serial FPDP Rugged Rackmount Recorder
Customer Information
G D I - PEE N S TEMHIGH-SPEED RECORDING SYSTEMS
Last updated: October 2012
R SA G SA R G S SANALOG RECORDING SYSTEMSANALOG RECORDING SYSTEMS
IDIGITAAL N R RECORDING SYSTEMS
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Talon High-Speed Recording Systems: Flexible and Deployable Solutions
Systems Include:■ High-performance Windows®
workstation■ High-performance Intel®
Processor■ Pentek SystemFlow®
recording software withgraphical user interface
■ SystemFlow virtualoscilloscope and spectrumanalyzer
■ Supported RAID levels of upto 0, 1, 5, 6, 10 and 50
■ Time stamping support■ Detailed technical
documentation
Systems Benefits:■ Complete turnkey systems■ Rack-mountable and
portable form factors■ C-callable API for integration
of recorder into application■ Sustained recording rates of
up to 3.2 GB/sec■ Recording to non-proprietary
NTFS file system for easyand immediate data access
■ Ideal for communications,radar, wireless, SIGINT,telecom and satcom
■ They are easy to use rightout-of-the-box
■ Can be controlled over theEthernet or over the Internet
High-Speed Recording SystemsTalon® High-Speed Recording Systems
eliminate the time and risk associated withnew technology system development. Withincreasing pressure in both the defense andcommercial arenas to get to the market first,today’s system engineers are looking for morecomplete off-the-shelf system offerings.
Out of the box, these systems arrivecomplete with a full-featured virtual opera-tor control panel ready for immediate datarecording and/or playback operation.
Because they consist of modular COTSboard-level products and flexible controlsoftware, they are easily scalable to largermultichannel data acquisition and recordingapplications requiring sustained, aggregaterecording rates of up to 3.2 GB/sec.
For example, they can be used as thedata acquisition resource for embedded sys-tems in real-time digital signal processingapplications. A complete suite of softwaredevelopment tools simplifies custom systemintegration.
Ready-to-Run Recording SystemsDepending on model, the Pentek offer-
ings are fully integrated systems featuring arange of A/D and D/A resources or digitalI/O with high-speed disk arrays.
Since these systems are built on aWindows workstation, users can easily installpost-processing and analysis tools to operateon the recorded data.
Pentek systems provide a flexible archi-tecture that can be easily customized tomeet user needs. Multiple RAID levels ofup to 0, 1, 5, 6, 10 and 50, provide a choicefor the required level of redundancy.
Pentek RTS High-SpeedRecording Systems are designed
for commercial applications.
Pentek RTR High-SpeedRecording Systems are designed
for harsh environments.
Recording Systems Form FactorsPentek’s High-Speed Recording Systems
are available as Lab Systems, PortableSystems and Rugged Systems.
RTS Lab Systems are housed in a 19-in.rack-mountable chassis in a PC server con-figuration. They are designed for commercialapplications in a lab or office environment.
RTR Portable Systems are available ina small briefcase-sized enclosure with anintegral LCD display and keyboard. They,too, provide a PC server configuration andare designed for commercial or harsh environ-ment field applications where size and weightis of paramount importance.
RTR Rugged Systems are housed in a19-in. rugged rack-mountable chassis or abriefcase-sized enclosure in a PC serverconfiguration. They are built to surviveshock and vibration and they target opera-tion in harsh environments and remotelocations that may be unsuitable for humans.
➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Local or Remote Socket
connection
SERVER
Sockets
Windows
Drivers
SystemFlowCommand
Processor
SystemFlow Record/Play
Server Application
Windows Operating System
NTFS
User
Control
Block
User
Proc.Block
LabVIEW
SignalViewer
SystemFlow JAVA
Record/Play GUI Application
SocketsSystemFlow JAVA
Client API
Client Operating System(Windows/Linux/Other)
NTFS
CLIENT
API
SystemFlow Architecture
Server/Client ArchitectureAs shown in the block diagram, theSystemFlow architecture provides foreasy communication between therecording system Server on the rightand the Client PC on the left.
Function LibrariesThe function libraries and tools forcontrolling the recording andplayback functions include theApplication Programming Interface,the Graphical User Interface and theintegrated Signal Viewer.
SystemFlow APIThe SystemFlow API allows developersto configure and customize the systeminterfaces and operation. Source code issupplied for all client API functions. Awell-defined set of plugins allows theuser to extend server API functions.
Server/Client CommunicationServer and Client communicatethrough a standard socket connection.This arrangement enables the Serverto provide real-time recording andplayback functions that can becontrolled from a local or a remoteClient. It also allows Client andServer to run on different operatingsystems.
SystemFlow GUIThe SystemFlow architecture features aWindows-based GUI (Graphical UserInterface) that provides a simple meansto configure and control the system.Custom configurations can be stored asprofiles and later loaded when needed,allowing the user to select preconfiguredsettings with a single click.
SystemFlow Signal ViewerSystemFlow also includes signal viewingand analysis tools that allow the user tomonitor the signal prior to, during, andafter a recording session. These toolsinclude a virtual oscilloscope and avirtual spectrum analyzer. More infor-mation on the Signal Viewer is providedon the next page.
NTFS File SystemThe NTFS file management systemprovides immediate access to the recordeddata, thereby eliminating time-consum-ing data conversion processes requiredwith proprietary file managementsystems. It also eliminates the need forcustom hardware and software platformswhere the recorded data may need to bephysically transported for conversion.
➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
SystemFlow Graphical User Interface
SystemFlow Signal ViewerThe SystemFlow Signal Viewer includes a virtual oscillo-
scope and spectrum analyzer for signal monitoring in boththe time and frequency domains. It is extremely useful forpreviewing live inputs prior to recording, and for monitoringsignals as they are being recorded to help ensure successfulrecording sessions. The viewer can also be used to inspectand analyze the recorded files after the recording is complete.
SystemFlow Hardware Configuration InterfaceThe Hardware Configuration Interface provides a simple
and intuitive means for setting up the system parameters.The DDC configuration screen shown here, provides entries forinput source, center frequency, decimation, as well as gateand trigger information. All parameters contain limit-checking and integrated help to provide an easier-to-useout-of-the-box experience.
SystemFlow Recorder InterfaceThe Recorder Interface provides the user with a control
interface for the recording system. It includes Configuration,Record, Playback and Status screens, each with intuitive con-trols and indicators. The user can easily move between screensto set configuration parameters, control and monitor a record-ing, play back a recorded signal and monitor board temperatureand voltage levels. The signal viewer, integrated into the record-ing GUI, allows the user to monitor real-time signals or signalsrecorded on disk.
Advanced signal analysis capabilities include automaticcalculators for signal amplitude and frequency, second andthird harmonic components, THD (total harmonic distortion)and SINAD (signal to noise and distortion). With time andfrequency zoom, panning modes and dual, annotated cursorsto mark and measure points of interest, the SystemFlowSignal Viewer can often eliminate the need for a separateoscilloscope or spectrum analyzer in the field.
➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Recording and Playback Dataflow
Shown in this diagram is the dataflowduring a typical recording session. ThePentek Transceiver Board contains a 2-chan-nel 200 MHz A/D for digitizing two inputanalog channels. The digitized outputs aredownconverted by the two DDCs (DigitalDownconverters) and moved on to the PCsystem memory via the PCI Express inter-
face. Both the DDCs and the PCIe interfaceare implemented in the board’s FPGA.Data then moves from the system memoryto the Recording System RAID Controllerand is then recorded to disk via the SATAinterface. DMA controllers conduct all datatransfers, bypasssing the CPU for guaranteedreal-time operation.
Recording Dataflow
Playback Dataflow During a playback session, data storedon disk moves through the SATA interfaceof the Playback System RAID Controller.From there, data is passed to the PC systemmemory through the PCIe interface andthen to the Pentek Transceiver board throughits PCIe interface, all via hardware DMAcontrollers for real-time operation.
This board also contains DUCs (DigitalUpconverters) which upconvert the data tothe original IF frequency bands. Two 800 MHzD/As convert the data to analog form andprovide signals that are identical to theanalog signals that were originally recorded.
These can be further analyzed with anyWindows-compatible analysis software.
System Memory
Recording System SBC/MB
CPURecording System
RAID Controller
200 MHZ
16 Bit A/D
200 MHZ
16 Bit A/D
Pentek Transceiver Board TIMING BUS GENERATOR
Clock / Sync / Gate / PPS
PCI Express
Interface
RF/IF Analog Input
Channel # 1
RF/IF Analog Input
Channel # 2
Sample Clk/Reference Clk In
Gate/Trigger/Sync/PPS
A/D Clock/Sync Bus
Digital IF
Channel # 1
Digital IF
Channel # 2
2 Channels of Digital Data
Being Transferred Over A
PCI Express Interface
2 Channels of Digital Data
Being Transferred Over A
SATA Interface
PCI Express Interface PCI Express Interface
RAIDController
SATAInterface
DDC
#1
DDC
#2
Single
Volume
RAID 0
Storage
Array
System Memory
Playback System SBC/MB
CPUPlayback System
RAID Controller
800 MHZ
16 Bit D/A
800 MHZ
16 Bit D/A
Pentek Transceiver Board TIMING BUS GENERATOR
Clock / Sync / Gate / PPS
PCI Express
Interface
RF/IF Analog Output
Channel # 1
RF/IF Analog Output
Channel # 2
Sample Clk/Reference Clk In
Gate/Trigger/Sync/PPS
D/A Clock/Sync Bus
Digital IF
Channel # 1
Digital IF
Channel # 2
2 Channels of Digital Data
Being Transferred Over A
PCI Express Interface
2 Channels of Digital Data
Being Transferred Over A
SATA Interface
PCI Express Interface PCI Express Interface
RAIDController
SATAInterface
DUC
#1
DUC
#2
Single
Volume
RAID 0
Storage
Array
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2706 Eight-Channel RF/IF, 200 MS/sec Rackmount Recorder
General InformationThe Talon® RTS 2706 is a turnkey, multi-
band recording and playback system forrecording and reproducing high-bandwidthsignals. The RTS 2706 uses 16-bit, 200 MHzA/D converters and provides sustainedrecording rates up to 2 GB/sec in four-channel configuration.
The RTS 2706 uses Pentek’s high-poweredVirtex-6-based Cobalt® modules, that provideflexibility in channel count, with optionaldigital downconversion capabilities. Optional16-bit, 1.25 GHz D/A converters with digitalupconversion allow real-time reproductionof recorded signals.
A/D sampling rates, DDC decimationsand bandwidths, D/A sampling rates andDUC interpolations are among the GUI-selectable system parameters, providing afully-programmable system capable of record-ing and reproducing a wide range of signals.
Optional GPS time and position stamp-ing allows the user to record this criticalsignal information.
SystemFlow SoftwareThe RTS 2706 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple means toconfigure and control the system.
Custom configurations can be stored asprofiles and later loaded when needed,allowing the user to select preconfiguredsettings with a single click.
Contact factory for options,number and type of analogchannels, recording rates, anddisk capacity.
ew!
NeNew!
Features■ Complete multiband recording
and playback system■ 4U 19-inch industrial rack-
mount PC server chassis■ Windows® 7 Professional
workstation with high-perform-ance Intel® CoreTM i7 processor
■ 200 MHz max. 16-bit A/Dsampling for recording,up to to eight channels
■ 1.25 GHz max. 16-bit D/Asampling for playback, up toeight channels
■ 80 MHz max. record andplayback signal bandwidths
■ Capable of record/playback ofIF frequencies to 700 MHz
■ Real-time sustainedrecording rates of up to2 GB/sec
■ Up to 20 terabytes of storageto NTFS RAID disk array
■ RAID levels of 0 ,1, 5 , 6, 10and 50
■ SystemFlow® GUI with signalviewer analysis tool
■ C-callable API for integrationof recorder into application
■ File headers include timestamping and recordingparameters
■ DDC decimation and DUCinterpolation range from2 to 65,536
■ Optional GPS time andposition stamping
SystemFlow also includes signal viewingand analysis tools, that allow the user tomonitor the signal prior to, during, andafter a recording session. These tools includea virtual oscilloscope and a virtual spectrumanalyzer.
Built on a Windows 7 Professionalworkstation, the RTS 2706 allows the userto install post processing and analysis toolsto operate on the recorded data. The RTS2706 records data to the native NTFS filesystem, providing immediate access to therecorded data.
Data can be off-loaded via two gigabitEthernet ports, six USB 2.0 ports or twoeSATA ports. Additionally, data can becopied to optical disk, using the 8X doublelayer DVD±R/RW drive.
Flexible ArchitectureThe RTS 2706 is configured in a 4U 19"
rack-mountable chassis, with hot-swappabledata drives, front panel USB ports and I/Oconnectors on the rear panel. Systems arescalable to accommodate multiple chassisto increase channel counts and aggregatedata rates. All recorder chassis are connectedvia Ethernet and can be controlled from asingle GUI either locally or from a remote PC.
Multiple RAID levels, including 0, 1, 5,6, 10 and 50, provide a choice for the requiredlevel of redundancy. Up to 20 hot-swappableSATA drives are optionally available, allowingup to 20 terabytes of real-time data storagespace in a single 4U chassis. ➤
Channels
In
Channels
Out
200 MHz
16 bit A/D
Up to 8
Channels
DIGITAL
DOWN
CONVERTER
Decimation:
2 to 65,536
INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 20 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTS 2706
USB 2.0
Gigabit
Ethernet
PS/2
Keyboard
PS/2
Mouse
Video
Output
2
6
eSATA2
GPS
Antenna
(Optional)
800 MHz
or 1.25 GHz
16 bit D/A
Up to 8
Channels
DIGITAL
UP
CONVERTER
Decimation:
2 to 65,536
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2706 Eight-Channel RF/IF, 200 MS/sec Rackmount Recorder
➤ SystemFlow Graphical User Interface
SystemFlow Signal ViewerThe SystemFlow Signal Viewer includes a virtual oscillo-
scope and spectrum analyzer for signal monitoring in boththe time and frequency domains. It is extremely useful forpreviewing live inputs prior to recording, and for monitoringsignals as they are being recorded to help ensure successfulrecording sessions. The viewer can also be used to inspectand analyze the recorded files after the recording is complete.
SystemFlow Hardware Configuration InterfaceThe RTS 2706 configuration screens provide a simple and
intuitive means for setting up the system parameters. TheDDC configuration screen shown here, provides entries forinput source, center frequency, decimation, as well as gateand trigger information. All parameters contain limit-checking and integrated help to provide an easier-to-useout-of-the-box experience.
SystemFlow Recorder InterfaceThe RTS 2706 GUI provides the user with a control interface
for the recording system. It includes Configuration, Record,Playback and Status screens, each with intuitive controls andindicators. The user can easily move between screens to setconfiguration parameters, control and monitor a recording, playback a recorded signal and monitor board temperature and volt-age levels. The signal viewer, integrated into the recording GUI,allows the user to monitor real-time signals or signals recordedon disk.
Advanced signal analysis capabilities include automaticcalculators for signal amplitude and frequency, second andthird harmonic components, THD (total harmonic distor-tion) and SINAD (signal to noise and distortion). With timeand frequency zoom, panning modes and dual, annotatedcursors to mark and measure points of interest, the System-Flow Signal Viewer can often eliminate the need for aseparate oscilloscope or spectrum analyzer in the field. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2706 Eight-Channel RF/IF, 200 MS/sec Rackmount Recorder
➤ A/D PerformanceSpurious Free Dynamic Range
fin = 70 MHz, f
s = 200 MHz, Internal Clock
Spurious Pick-up
fs = 200 MHz, Internal Clock
Two-Tone SFDR
f1 = 30 MHz, f
2 = 70 MHz, f
s = 200 MHz
Two-Tone SFDR
f1 = 69 MHz, f
2 = 71 MHz, f
s = 200 MHz
Adjacent Channel Crosstalk
fin Ch2
= 70 MHz, fs = 200 MHz, Ch 1 shown
Input Frequency Response
fs = 200 MHz, Internal Clock
D/A PerformanceSpurious Free Dynamic Range
fout
= 70 MHz, fs = 200 MHz, Internal Clock
Spurious Free Dynamic Range
fout
= 120 MHz, fs = 400 MHz, External Clock ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2706 Eight-Channel RF/IF, 200 MS/sec Rackmount Recorder
➤ SpecificationsPC Workstation (standard configuration)Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or higherSDRAM: 6 GBRAID
Storage: 2–20 TBNumber of Drives: 1–20Supported RAID Levels: 0, 1, 5, 6, 10 and 50
Analog Recording Input / OutputAnalog Signal Inputs
Input Type: Transformer-coupled, front panel femaleSSMC connectorsTransformer Type: Coil Craft WBC4-6TLBFull Scale Input: +8 dBm into 50 ohms3 dB Passband: 300 kHz to 700 MHz
A/D ConvertersType: Texas Instruments ADS5485Sampling Rate: 10 MHz to 200 MHzResolution: 16 bits
Digital DownconverterType: Virtex-6 installed DDC IP CoreDecimation: 2 to 65,536 in two stages of 2 to 256Bandwidth: Up to 80 MHz
Analog Signal OutputsOutput Type: Transformer-coupled, front panel femaleSSMC connectorsFull Scale Output: +4 dBm into 50 ohms3 dB Passband: 300 kHz to 700 MHz
Digital Upconverter and D/AsType: TI DAC5688 and Pentek-installed interpolation IP coreInterpolation: 2 to 65,536 in two stages of 2 to 256Input Data Rate: 250 MHx max.Output IF: DC to 400 MHzOutput Signal: Analog, real or quadratureOutput Sampling Rate: 800 MHz max. with2, 4 or 8 interpolationResolution: 16 bits
Clock Sources: Selectable from onboard programmableVCXO, external or LVDS clocks
External ClocksType: Front panel female SSMC connector, sine wave,0 to +10 dBm, AC-coupled, 50 ohms, 10 to 200 MHz
Multi-Recorder Sync/Gate Bus: 26-pin connector, dual clock/sync/gate input/output LVDS buses; one sync/gate inputTTL signal
Physical and EnvironmentalSize: 19" W x 26" D x 7" HWeight: 60-85 lbOperating Temp: +5° to +45° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingPower Requirements: 100 to 240 VAC, 50 to 60 Hz, 500 W max.
Specifications are subject to change without notice
Recording OptionsOption 201 1-Channel recording
Option 202 2-Channel recording
Option 203 3-Channel recording
Option 204 4-Channel recording
Option 208 8-Channel recording
Playback OptionsOption 221 1-Channel playback
Option 222 2-Channel playback
Option 224 2-Channel playback
Option 228 8-Channel playback
Storage OptionsOption 240 2 TB Storage capacity
Option 241 4 TB Storage capacity
Option 242 6 TB Storage capacity
Option 243 8 TB Storage capacity
Option 244 12 TB Storage capacity
Option 245 16 TB Storage capacity
Option 246 20 TB Storage capacity
General OptionsOption 260 Digital downconversion & upconversion
Option 261 GPS time & position stamping
Model RTS 2706 Order Information
Contact Pentek for compatible Option combinations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2709 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/secRackmount Recorder
General InformationThe Talon® RTS 2709 is a turnkey system,
used for recording high-bandwidth signals.The RTS 2709 uses 12-bit, 3.6 GHz A/Dconverters and can provide sustainedrecording rates up to 3.2 GB/sec. It can beconfigured as a one- or two-channel systemand can record sampled data, packed as8-bit-wide consecutive samples, or as16-bit-wide consecutive samples (12-bitdigitized samples residing in the 12 MSBsof the 16-bit word.)
The RTS 2709 uses Pentek’s high-powered Virtex-6-based Cobalt® boardsthat provide the data streaming enginefor the high-speed A/D converters.Channel and packing modes as well asgate and trigger settings are among theGUI-selectable system parameters,providing complete control over thisultra wideband recording system.
Optional GPS time and position stamp-ing allows the user to capture this criticalinformation in the header of each data file.
SystemFlow SoftwareThe RTS 2709 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple means toconfigure and control the system.
Custom configurations can be stored asprofiles and later loaded when needed,allowing the user to select preconfiguredsettings with a single click.
Contact factory for options, fornumber and type of analogchannels, recording rates, anddisk capacity.
ew!
NeNew!
Features■ High-speed RF/IF recording
system■ Sample rates up to 3.2 GHz
in single-channel mode■ Sample rates up to 1.6 GHz
in dual-channel mode■ Capable of recording RF/IF
frequencies to 1.75 GHz insingle-channel mode
■ Capable of recording RF/IFfrequencies to 2.8 GHz indual-channel mode
■ 12-bit A/D, with 12- and8 bit packing modes
■ Real-time sustainedrecording rates of up to3.2 GB/sec
■ 4U 19 inch industrial rack-mount PC server chassis
■ Windows® 7 Professionalworkstation with high perform-ance Intel® CoreTM i7 processor
■ Up to 20 terabytes of SSDstorage to NTFS RAID diskarray
■ RAID levels of 0 ,1, 5 , 6, 10and 50
■ N+1 redundant power supply■ SystemFlow® GUI with signal
viewer analysis tool
■ C-callable API for integrationof recorder into application
■ File headers include timestamping and recordingparameters
■ Optional GPS time andposition stamping
SystemFlow also includes signal view-ing and analysis tools that allow the user tomonitor the signal prior to, during, andafter a recording session. These tools includea virtual oscilloscope and a virtual spectrumanalyzer.
Built on a Windows 7 Professionalworkstation, the RTS 2709 allows the userto install post-processing and analysis toolsto operate on the recorded data. The RTS2709 records data to the native NTFS filesystem that provides immediate access tothe recorded data.
Data can be off-loaded via two gigabitEthernet ports, six USB 2.0 ports or twoeSATA ports. Additionally, data can becopied to optical disk, using the 8X doublelayer DVD±R/RW drive.
Flexible ArchitectureThe RTS 2709 is configured in a 4U 19"
rack-mountable chassis, with hot-swappabledata drives, front panel USB ports and I/Oconnectors on the rear panel. Systems arescalable to accommodate multiple chassisto increase channel counts and aggregatedata rates. All recorder chassis are connectedvia Ethernet and can be controlled from asingle GUI either locally or from a remote PC.
Multiple RAID levels, including 0, 1, 5,6, 10 and 50 provide a choice for the requiredlevel of redundancy. Up to 40 hot-swappableSATA SSDs are optionally available, allowingup to 20 terabytes of real-time data storagespace in a single 4U chassis. ➤
Channel 1
In 3.6 GHz
(1 Channel)
or
1.8 GHz
(2 Channel)
12 Bit A/D
INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 20 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTS 2709
USB
Gigabit
Ethernet
Keyboard
Mouse
Video
Output
eSATA
GPS
Antenna
(Optional)
Channel 2
In
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2709 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/secRackmount Recorder
➤ SystemFlow Graphical User Interface
SystemFlow Signal ViewerThe SystemFlow Signal Viewer includes a virtual oscillo-
scope and spectrum analyzer for signal monitoring in boththe time and frequency domains. It is extremely useful forpreviewing live inputs prior to recording, and for monitoringsignals as they are being recorded to help ensure successfulrecording sessions. The viewer can also be used to inspectand analyze the recorded files after the recording is complete.
SystemFlow Hardware Configuration InterfaceThe RTS 2709 configuration screens provide a simple and
intuitive means for setting up the system parameters. TheDDC configuration screen shown here, provides entries forinput source, center frequency, decimation, as well as gateand trigger information. All parameters contain limit-checking and integrated help to provide an easier-to-useout-of-the-box experience.
SystemFlow Recorder InterfaceThe RTS 2709 GUI provides the user with a control interface
for the recording system. It includes Configuration, Record,Playback and Status screens, each with intuitive controls andindicators. The user can easily move between screens to setconfiguration parameters, control and monitor a recording, playback a recorded signal and monitor board temperature and volt-age levels. The signal viewer, integrated into the recording GUI,allows the user to monitor real-time signals or signals recordedon disk.
Advanced signal analysis capabilities include automaticcalculators for signal amplitude and frequency, second andthird harmonic components, THD (total harmonic distor-tion) and SINAD (signal to noise and distortion). With timeand frequency zoom, panning modes and dual, annotatedcursors to mark and measure points of interest, the System-Flow Signal Viewer can often eliminate the need for aseparate oscilloscope or spectrum analyzer in the field. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2709 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/secRackmount Recorder
➤➤ SpecificationsPC Workstation (standard configuration)Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or higherSDRAM: 8 GBRAID
Storage: 2–20 TBNumber of Drives: Up to 40Drive Type: SATA III SSDsSupported RAID Levels: 0, 1, 5, 6, 10 and 50
Analog Signal InputsConnectors: Two rear panel SSMC connectors, In 1 & In 2Input Type: Single-ended, non-invertingFull Scale Input: +4 dBm into 50 ohmsCoupling: Transformer coupledAnalog Input TransformersBandwidth: 4.5 kHz to 3.0 GHzInsertion Loss: 3.5 dB maximum
A/D ConvertersType: Texas Instruments ADC12D1800Sampling RateSingle-channel mode: 500 MHz to 3.6 GHzDual-channel mode: 150 MHz to 1.8 GHzResolution: 12 bitsMaximum Usable Input FrequencySingle-channel mode: 1.75 GHzDual-channel mode: 2.8 GHz
Sampling Clock Source: Internal fixed-frequency orprogrammable oscillator (selectable by option);in single-channel mode, the sample rate is 2x the clockfrequency; in dual-channel mode, the sample rate equalsthe clock frequency
Frequency Reference: Accepts external 10 MHz reference at0 to +4 dBm to phase-lock the clock oscillator
Physical and EnvironmentalSize: 19" W x 26" D x 7" HWeight: 60 – 85 lbOperating Temp: +5° to +45° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingPower Requirements: 100 to 240 VAC, 50 to 60 Hz, 500 W max.
Specifications are subject to change without notice.
Sample Rate OptionsOption 910 User-Programmable Sample Clock
Dual-channel mode sample clock range150 MHz – 945 MHz970 MHz – 1134 MHz1213 MHz – 1417.5 MHz
Single-channel mode sample clock range500 MHz – 1890 MHz1940 MHz – 2268 MHz2426 MHz – 2835 MHz
Option 911 Fixed-frequency clock1.5 / 3.0 GHz sample clock
Option 912 Fixed-frequency clock1.6 / 3.2 GHz sample clock
Sample rates are set up for dual-channel mode first andsingle-channel mode second: e.g. 1.5 / 3.0 is 1.5 in dual-channel mode and 3.0 in single-channel mode.
Custom fixed-frequency sample clocks available upon request.
Storage OptionsOption 241 4.8 TB SSD StorageOption 242 9.6 TB SSD StorageOption 243 19.2 TB SSD Storage
General OptionsOption 261 GPS Time & Position Stamping
Model RTS 2709 Options
Contact Pentek for compatible Option combinations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2715 Two-Channel Ten-Gigabit Ethernet Rackmount Recorder
General InformationThe Talon® RTS 2715 is a complete turn-
key recording system for storing one or twoten-gigabit Ethernet (10 GbE) streams. It isideal for capturing any type of streamingsources including live transfers from sensorsor data from other computers and supportsboth TCP and UDP protocols.
Using highly-optimized disk storagetechnology, the system achieves aggregaterecording rates up to 2 GB/sec.
Two rear panel SFP+ LC connectors for850 nm multi-mode or single-mode fibrecables, or CX4 connectors for copper twinaxcables accommodate all popular 10 GbEinterfaces.
Optional GPS time and position stamp-ing accurately identifies each record in thefile header.
SystemFlow SoftwareThe RTS 2715 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple and intuitivemeans to configure and control the system.
Custom configurations can be stored asprofiles and later loaded as needed, allow-ing the user to select preconfigured settingswith a single click.
Contact factory for options,number of channels, recordingrates, and disk capacity.
ew!
NeNew!
Features■ Records ten-gigabit
Ethernet streams■ One or two channels■ TCP and UDP protocols
■ Copper or optical 10 GbEinterfaces
■ Aggregate recording ratesto 2 GB/sec
■ 4U or 5U 19-inch industrialrackmount PC server chassis
■ Windows® 7 Professionalworkstation with a highperformance Intel® CoreTM i7processor
■ Up to 20 terabytes of storageto NTFS RAID disk array
■ RAID levels of 0 ,1, 5 , 6,10 and 50
■ SystemFlow® GUI virtualinstrumentation panel forfast, intuitive operation
■ C-callable API for integrationof recorder into applications
■ File headers include timestamping and recordingparameters
■ Optional GPS time andposition stamping
Built on a server-class Windows 7 Profes-sional workstation, the RTS 2715 allows theuser to install post-processing and analysistools to operate on the recorded data.
The RTS 2715 records data to the nativeNTFS file system, providing immediateaccess to the recorded data.
Data can be off-loaded via two gigabitEthernet ports or six USB 2.0 ports. Addi-tionally, data can be copied to optical disk,using the 8X double layer DVD±R/RW drive.
Flexible ArchitectureThe RTS 2715 is configured in a 4U or
5U 19" rack-mountable chassis, with hot-swapdata drives, front panel USB ports and I/Oconnectors on the rear panel.
Systems are scalable to accommodatemultiple chassis to increase channel countsand aggregate data rates.
All recorder chassis are connected viaEthernet and can be controlled from a singleGUI either locally or from a remote PC.
Multiple RAID levels, including 0, 1, 5,6, 10 and 50, provide a choice for the requiredlevel of redundancy. Up to 24 hot-swappableSATA drives are optionally available,allowing up to 20 terabytes of real-timedata storage space in a single chassis. ➤
Ch 1
In / Out 10G
Ethernet INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 20 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTS 2715
USB 2.0
Gigabit
Ethernet
PS/2
Keyboard
PS/2
Mouse
Video
Output
2
6
eSATA2
GPS
Antenna
(Optional)
Ch 2
In / Out 10G
Ethernet
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2715 Two-Channel Ten-Gigabit Ethernet Rackmount Recorder
➤ SystemFlow Graphical User Interface
The RTS 2715 GUI provides the userwith a control interface for the recordingsystem. It includes Configuration, Record,Playback, and Status screens, each withintuitive controls and indicators.
The user can easily move betweenscreens to set configuration parameters,control and monitor a recording, and playback a recorded stream.
All parameters contain limit-check-ing and integrated help to provide aneasier-to-use out-of-the-box experience.
The Configure Screen shows a blockdiagram of the system, and presentsoperational system parameters includingtemperature and voltages. Parametersare entered for each input or outputchannel specifying UDP or TCP protocol,client or server connection, the IP addressand port number.
The Record Screen allows you to browse a folder and enter a file namefor the recording. The length of the recording for each channel can be speci-fied in megabytes or in seconds. Intuitive buttons for Record, Pause andStop simplify operation. Status indicators for each channel display themode, the number of recorded bytes, and the average data rate. A Data Lossindicator alerts the user to any problem, such as a disk full condition.
By checking the Master Record boxes, any combination of channels inthe lower screen can be grouped for synchronous recording via the upperMaster Record screen. The recording time can be specified, and monitoringfunctions inform the operator of recording progress. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2715 Two-Channel Ten-Gigabit Ethernet Rackmount Recorder
➤ SystemFlow APISystemFlow includes a complete API (Application Pro-
gramming Interface) supporting control and status queriesof all operations of the RTS 2715 from a custom application.
High-level C-language function calls and the supportingdevice drivers allow users to incorporate the RTS 2715 as ahigh-performance server front end to a larger system. This issupported using a socket interface through the Ethernetport, either to a local host or through an internet link forremote, stand-alone acquisition. Recorded NTFS files can beeasily retrieved through the same connection.
SpecificationsPC Workstation
Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or higherSDRAM: 6 GBRAID
Storage: 5–20 TBDrive Type: Hard disk drivesNumber of Drives: 12–24Supported Levels: 0, 1, 5, 6, 10 and 50
Ten-Gigabit Ethernet InterfaceCopper - Option 280
Quantity: 2 portsCable: Twinax copperConnector Type: CX4Max. Cable Length: 15 m
Multi-mode Fibre Optical - Option 281Quantity: 2 portsCable: Multi-mode fibre, 850 nmConnector Type: LCMax. Cable Length: Up to 300 m
Single-mode Fibre Optical - Option 282
Quantity: 2 portsCable: Single-mode fibreConnector Type: LCMax. Cable Length: Up to 10 km
Physical and Environmental
Dimensions4U Long Chassis: 19" W x 26" D x 7" H5U Long Chassis: 19" W x 26" D x 8.75" H
Weight: 50–80 lbOperating Temp: +5° to +45° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingPower Requirements: 100 to 240 VAC, 50 to 60 Hz, 500 W max.
Option 201 - Single Channel 10 GbE Recorders
Option 201-242 Storage capacity: 5 TB12 ea. 1 TB, 3.5” hard disk drives4U long chassis
Option 201-244 Storage capacity: 10 TB12 ea. 2 TB, 3.5” hard disk drives4U long chassis
Option 201-246 Storage capacity: 20 TB24 ea. 2 TB, 3.5” hard disk drives5U long chassis
Model RTS2715 Ordering Information and Options
Option 202 - Dual Channel 10 GbE Recorders
Option 202-244 Storage capacity: 10 TB24 ea. 1 TB, 3.5” hard disk drives5U long chassis
Option 202-246 Storage capacity: 20 TB24 ea. 2 TB, 3.5” hard disk drives5U long chassis
10 GbE Interface (append to all options) Option 280 Copper , CX4 connectors
Option 281 Multi-mode optical, LC connectors
Option 282 Single-mode optical, LC connectors
General Options (append to all options) Option 261 GPS time & position stamping
Specifications are subject to change without notice
Contact Pentek for other configurations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2716 Eight-Channel Serial FPDP Rackmount Recorder
General InformationThe Talon® RTS 2716 is a complete turn-
key recording system capable of recordingand playing multiple serial FPDP datastreams. It is ideal for capturing any type ofstreaming sources including live transfersfrom sensors or data from other computersand is fully compatible with the VITA 17.1specification. Using highly-optimized diskstorage technology, the system achievesaggregate recording rates up to 2 GB/sec.
The RTS 2716 can be populated with upto eight SFP connectors supporting serialFPDP over copper, single-mode, or multi-mode fiber, to accommodate all popular serialFPDP interfaces. It is capable of both receiv-ing and transmitting data over these linksand supports real-time data storage to disk.
Programmable modes include flow con-trol in both receive and transmit directions,CRC support, and copy/loop modes. Thesystem is capable of handling 1.0625, 2.125and 2.5 GBaud link rates supporting datatransfer rates of up to 247 MB/sec per serialFPDP link.
Optional GPS time and position stamp-ing allows the user to mark the beginningof a recording in the recording file’s header.
SystemFlow SoftwareThe RTS 2716 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple and intuitivemeans to configure and control the system.
Contact factory for options,number of channels, recordingrates, and disk capacity.
Nw!
NeeNew!
Features■ Complete serial FPDP
record and playback system■ Up to eight I/O channels in a
single 4U or 5U 19 inchindustrial rackmount PCserver chassis
■ Supports Flow Control, CRC,and Copy/Loop Mode as areceiver and transmitter
■ Supports 1.0625, 2.125 and2.5 GBaud link rates
■ Copper, single-mode andmulti-mode fiber interfacesavailable
■ Real-time sustained recordingrates of up to 2 GB/sec ineight-channel configuration
■ Up to 20 terabytes of storageto NTFS RAID disk array
■ RAID levels of 0 ,1, 5 , 6, 10and 50
■ SystemFlow® GUI virtualinstrumentation panel forfast, intuitive operation
■ C-callable API for integrationof recorder into application
■ File headers include timestamping and recordingparameters
■ Optional GPS time andposition stamping
■ Windows® 7 Professionalworkstation with highperformance Intel® CoreTM i7processor
Custom configurations can be stored asprofiles and later loaded as needed, allow-ing the user to select preconfigured settingswith a single click.
Built on a server-class Windows 7 Profes-sional workstation, the RTS 2716 allows theuser to install post-processing and analysistools to operate on the recorded data.
The RTS 2716 records data to the nativeNTFS file system, providing immediateaccess to the recorded data.
Data can be off-loaded via two gigabitEthernet ports or six USB 2.0 ports. Addition-ally, data can be copied to optical disk, usingthe 8X double layer DVD±R/RW drive.
Flexible ArchitectureThe RTS 2716 is configured in a 4U or
5U 19" rack-mountable chassis, with hot-swapdata drives, front panel USB ports and I/Oconnectors on the rear panel.
Systems are scalable to accommodatemultiple chassis to increase channel countsand aggregate data rates.
All recorder chassis are connected viaEthernet and can be controlled from a singleGUI either locally or from a remote PC.
Multiple RAID levels, including 0, 1, 5,6, 10 and 50, provide a choice for the requiredlevel of redundancy. Up to 24 hot-swappableSATA drives are optionally available,allowing up to 20 terabytes of real-timedata storage space in a single chassis. ➤
Ch 1
In / Out Serial
FPDP
INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 20 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTS 2716
USB 2.0
Gigabit
Ethernet
PS/2
Keyboard
PS/2
Mouse
Video
Output
2
6
GPS
Antenna
(Optional)
Ch 2
In / Out Serial
FPDP
Ch 3
In / Out Serial
FPDP
Ch 4
In / Out Serial
FPDP
Ch 5
In / Out Serial
FPDP
Ch 6
In / Out Serial
FPDP
Ch 7
In / Out Serial
FPDP
Ch 8
In / Out Serial
FPDP
eSATA2
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2716 Eight-Channel Serial FPDP Rackmount Recorder
➤ SystemFlow Graphical User Interface
The RTS 2716 GUI provides the userwith a control interface for the recordingsystem. It includes Configuration, Record,Playback, and Status screens, each withintuitive controls and indicators.
The user can easily move betweenscreens to set configuration parameters,control and monitor a recording, and playback a recorded stream.
All parameters contain limit-check-ing and integrated help to provide aneasier-to-use out-of-the-box experience.
The Configure Screen shows a blockdiagram of the system, and providescontrol for operational system param-eters. These parameters are entered foreach input or output channel, specify-ing the flow control settings and therecognition of a CRC in the data stream. Each channel can also be setupto utilize SFPDP’s copy/loop mode.
The Record Screen allows you to browse a folder and enter a file namefor the recording. The length of the recording for each channel can be speci-fied in megabytes or in seconds. Intuitive buttons for Record, Pause andStop simplify operation. Status indicators for each channel display themode, the number of recorded bytes, and the average data rate. A Data Lossindicator alerts the user to any problem, such as a disk full condition.
By checking the Master Record boxes, any combination of channels inthe lower screen can be grouped for synchronous recording via the upperMaster Record screen. The recording time can be specified, and monitoringfunctions inform the operator of recording progress. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTS 2716 Eight-Channel Serial FPDP Rackmount Recorder
➤ SystemFlow APISystemFlow includes a complete API (Application Pro-
gramming Interface) that supports control and status queriesof all operations of the RTS 2716 from a custom application.
High-level C-language function calls and the supportingdevice drivers allow users to incorporate the RTS 2716 as ahigh-performance server front end to a larger system. This issupported using a socket interface through the Ethernetport, either to a local host or through an internet link forremote, stand-alone acquisition. Recorded NTFS files can beeasily retrieved through the same connection.
SpecificationsPC Workstation
Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 1.8 GHz or greaterSDRAM: 6 GBRAID
Storage: 5–20 TBDrive Type: 3.5” HDDNumber of Drives: Options 041, 042 up to 16removable drives; options 043, 082, 083 up to 20removable drivesSupported Levels: 0, 1, 5, 6, 10 and 50
Serial FPDP Interface
Copper - Option 280Cable: 150-ohm shielded quadConnector Type: HSSDC2Max. Cable Length: 30 m for 1.0625 Gbaud equalizedcable, 15 m for 2.5 Gbaud equalized cable
Multi-mode Fiber Optical - Option 281Cable: Multi-mode fiber, 850 nmConnector Type: LCMax. Cable Length: Up to 300 m
Single-mode Fiber Optical - Option 282Cable: Single-mode fiberConnector Type: LCMax. Cable Length: Up to 10 km
Physical and Environmental
Dimensions
Full 4U Chassis: 19" W x 26" D x 7" HWeight: 30 – 80 lbOperating Temp: +5° to +45° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingPower Requirements: 100 to 240 VAC, 50 to 60 Hz, 500 W max.
4-Channel Serial FPDP RecordersOption 041 Storage capacity: 5 TB
Maximum disk data rate: 988 MB/sec
Option 042 Storage capacity: 10 TBMaximum disk data rate: 988 MB/sec
Option 043 Storage capacity: 20 TBMaximum disk data rate: 988 MB/sec
Model RTS 2716 Ordering Information and Options
8-Channel Serial FPDP RecordersOption 082 Storage capacity: 10 TB
Maximum disk data rate: 1976 MB/ssec
Option 083 Storage capacity: 20 TBMaximum disk data rate: 1976 MB/sec
Serial FPDP Interface (append to options above) Option 280 Copper, HSSDC2 connectors
Option 281 Multi-mode optical, LC connectors
Option 282 Single-mode optical, LC connectors
General Options (append to all options) Option 261 GPS time & position stamping
Specifications are subject to change without notice
Contact Pentek for other configurations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2726 Four-Channel RF/IF, 200 MS/sec Rugged Portable Recorder
Features■ Designed to operate under
conditions of shock and vibration■ Portable system measuring
16.9" W x 9.5" D x 13.4" H■ Lightweight: approximately
30 pounds■ Rugged aluminum alloy chassis■ Shock- and vibration-resistant
SSDs perform well in vehicles,ships and aircraft
■ Recording & playback of IFsignals up to 700 MHz
■ Signal bandwidths to 80 MHz■ 200 MHz 16-bit A/Ds■ 800 MHz 16-bit D/As■ SFDR > 80 dBFS■ Real-time sustained recording
rates up to 1.6 GB/sec■ Up to of 3.8 TB storage with
hot-swappable SSD drives■ NTFS file format■ SystemFlow® GUI with
Signal Viewer analysis tool■ File headers include time
stamping and recordingparameters
■ Ideal for communications,radar, wireless, SIGINT,telecom and satcom
■ Optional GPS time andposition stamping
■ Complete high-performanceWindows® workstation
Contact the factory for options,for number and type of analogchannels, recording rates, anddisk capacity.
ew!
NeNew!
General InformationThe Talon® RTR 2726 is a turnkey, multi-
band recording and playback system thatallows the user to record and reproducehigh-bandwidth signals with a lightweight,portable and rugged package. The RTR 2726provides sustained recording rates of up to1.6 GB/sec in a four-channel system andis ideal for the user who requires bothportability and solid performance in acompact recording system.
The RTR 2726 is supplied in a small foot-print portable package measuring only16.9" W x 9.5" D x 13.4" H and weighingjust 30 pounds. With measurements similar toa small briefcase, this portable workstationincludes an Intel® CoreTM i7 processor ahigh-resolution 17" LCD monitor, and ahigh-performance SATA RAID controller.
At the heart of the RTR 2726 are PentekCobalt® Series Virtex-6 software radio boardsfeaturing A/D and D/A converters, DDCs(Digital Downconverters), DUCs (DigitalUpconverters), and complementary FPGAIP cores. This architecture allows the systemengineer to take full advantage of the latesttechnology in a turnkey system.
Optional GPS time and position stamp-ing allows the user to record this criticalsignal information.
SystemFlow SoftwareIncluded in this system is the Pentek
SystemFlow recording software. SystemFlowfeatures a Windows-based GUI (GraphicalUser Interface) that provides a simplemeans to configure and control the system.
Custom configurations can be stored asprofiles and later loaded when needed,
allowing the user to select preconfiguredsettings with a single click.
SystemFlow also includes signal view-ing and analysis tools, that allow the userto monitor the signal prior to, during, andafter a recording session. These tools includea virtual oscilloscope and a virtual spectrumanalyzer.
Built on a Windows 7 Professionalworkstation, the RTR 2726 allows the userto install post-processing and analysis toolsto operate on the recorded data. The RTR2726 records data to the native NTFS filesystem, providing immediate access to therecorded data.
Data can be off-loaded through two 1 GbEthernet ports, eight USB 2.0 ports or twoeSATA ports. Additionally, data can becopied to optical disk, using the 8X doublelayer DVD±R/RW drive.
Rugged & Flexible ArchitectureThe RTR 2726 is configured in a portable,
lightweight chassis with eight hot-swapSSDs, front panel USB ports and I/O connec-tions on the side panel. It is built on anextremely rugged, 100% aluminum alloyunit, reinforced with shock absorbing rubbercorners and an impact-resistant protectiveglass. Using shock- and vibration-resistantSSDs, the RTR 2726 is designed to reliablyoperate as a portable field instrument.
The eight hot-swappable SSDs providestorage capacities of up to 3.8 TB. Drivescan be easily removed or exchanged duringor after a mission to retrieve recorded data.Multiple RAID levels, including 0,1,5 and 6,provide a choice for the required level ofredundancy. ➤
INTEL CORE i7
PROCESSOR
SSD
SYSTEM DRIVEDDR
SDRAM
WINDOWS HOST PROCESSOR
RAID DATA STORE
SSD DRIVES SSD DRIVES
SSD DRIVES SSD DRIVES
HIGH RESOLUTION
VIDEO DISPLAY
8x USB 2.0
1x Gigabit
Ethernet
Aux Video
VGA Output
MODEL RTR 2726
Channels
In
Channels
Out
2x eSATA 3
200 MHz
16 bit A/D
Up to 4
Channels
DIGITAL DOWN
CONVERTER
DEC: 2 to 64K
800 MHz
16 bit D/A
Up to 2
Channels
DIGITAL UP
CONVERTER
INT: 2 to 512K
2x USB 3.0
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2726 Four-Channel RF/IF, 200 MS/sec Rugged Portable Recorder
➤ SystemView Graphical User Interface
SystemFlow Signal ViewerThe SystemFlow Signal Viewer includes a virtual oscillo-
scope and spectrum analyzer for signal monitoring in boththe time and frequency domains. It is extremely useful forpreviewing live inputs prior to recording, and for monitoringsignals as they are being recorded to help ensure successfulrecording sessions. The viewer can also be used to inspectand analyze the recorded files after the recording is complete.
SystemFlow Hardware Configuration InterfaceThe RTR 2726’s configuration screens provide a simple
and intuitive means for setting up the system parameters.The DDC configuration screen shown here, provides entriesfor input source, center frequency, decimation, as well asgate and trigger information. All parameters contain limit-checking and integrated help to provide an easier-to-useout-of-the-box experience.
SystemFlow Recorder InterfaceThe RTR 2726 GUI provides the user with a control interface
for the recording system. It includes Configuration, Record,Playback and Status screens, each with intuitive controls andindicators. The user can easily move between screens to set con-figuration parameters, control and monitor a recording, playback a recorded signal and monitor board temperature andvoltage levels. The signal viewer, integrated into the recordingGUI, allows the user to monitor real-time signals or recordedsignals on disk.
Advanced signal analysis capabilities include automaticcalculators for signal amplitude and frequency, second andthird harmonic components, THD (total harmonic distortion)and SINAD (signal to noise and distortion). With time andfrequency zoom, panning modes and dual annotated cursorsto mark and measure points of interest, the SystemFlowSignal Viewer can often eliminate the need for a separateoscilloscope or spectrum analyzer in the field. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2726 Four-Channel RF/IF, 200 MS/sec Rugged Portable Recorder
➤
➤ ➤ ➤ ➤ A/D PerformanceSpurious Free Dynamic Range
fin = 70 MHz, f
s = 200 MHz, Internal Clock
Spurious Pick-up
fs = 200 MHz, Internal Clock
Two-Tone SFDR
f1 = 30 MHz, f
2 = 70 MHz, f
s = 200 MHz
Two-Tone SFDR
f1 = 69 MHz, f
2 = 71 MHz, f
s = 200 MHz
Adjacent Channel Crosstalk
fin Ch2
= 70 MHz, fs = 200 MHz, Ch 1 shown
Input Frequency Response
fs = 200 MHz, Internal Clock
D/A PerformanceSpurious Free Dynamic Range
fout
= 70 MHz, fs = 200 MHz, Internal Clock
Spurious Free Dynamic Range
fout
= 120 MHz, fs = 400 MHz, External Clock
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2726 Four-Channel RF/IF, 200 MS/sec Rugged Portable Recorder
PC Workstation (standard configuration)Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or higherOperating System Drive: 128 GB SSDSDRAM: 6 GBMonitor: Built-in 17” high-resolution LCD
1440 x 900 pixels, 200 nitsRAID
Total Storage: 0.96, 1.9 or 3.8 TBNumber of Drives: 8Supported RAID Levels: 0, 1, 5 and 6Drive Bays: 8, hot-swap, removable, rear panel
USB 2.0 Ports: Eight (8) left side, two (2) front panelUSB 3.0 Ports: Two (2) left side1 Gb Ethernet Port: One (1) left sideeSATA 3 Ports: Two (2) left sideAux Video Output: 15-pin VGA left side
Analog Recording InputsAnalog Signal Inputs
Quantity: 1, 2, 3, or 4Input Type: Transformer-coupled, female SSMCconnectorsTransformer Type: Coil Craft WBC4-6TLBFull Scale Input: +8 dBm into 50 ohms3 dB Passband: 300 kHz to 700 MHz
A/D ConvertersType: Texas Instruments ADS5485Sampling Rate (ƒs): 10 MHz to 200 MHzResolution: 16 bitsA/D Recording Rate/Channel: 2ƒs bytes/sec,(e.g., 400 MB/sec per channel at ƒs = 200 MHz)
Digital DownconverterType: Virtex-6 installed DDC IP CoreDecimation (D): 2 to 65,536 in two stages of 2 to 256DDC Bandwidth: 0.8 ƒs/DBandwidth Range: 2.5 kHz to 80 MHz at ƒs = 200 MHzDDC Recording Rate/Channel: 2ƒs/D bytes/sec
Specifications Analog Playback OutputsAnalog Signal Outputs
Quantity: 1 or 2Output Type: Transformer-coupled, female SSMCconnectorsFull Scale Output: +4 dBm into 50 ohms3 dB Passband: 300 kHz to 700 MHz
Digital Upconverter, Interpolator and D/AsD/A Resolution: 16 bitsOutput Signal: Analog, real or quadratureType: TI DAC5688 and Pentek-installed IP core interpolatorIP Core Interpolation: 2 to 65,536 in two stages of 2 to 256DAC5688 Interpolation: 2, 4 or 8Overall Interpolation: 2 to 524,288Input Data Rate to DAC5688: 250 MS/sec max.Output Sampling Rate: 800 MHz maxOutput IF: DC to 400 MHzBandwidth Range: Matches recording bandwidths
Clock Sources: Selectable from onboard programmableVCXO, external or LVDS clocks
External ClocksType: Female SSMC connector, sine wave, 0 to +10 dBm,AC-coupled, 50 ohms, 10 to 200 MHz
Physical and EnvironmentalDimensions: 16.9" W x 9.5" D x 13.4" HWeight: 30 lb, approximatelyPower: 90 to 265 VAC, 50 - 60 HzOperating Temp: 0° to +50° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingOperating Shock: 15 g max. (11 msec, half sine wave)Operating Vibration: 10 to 20 Hz: 0.02 inch peak, 20 to 500 Hz:
1.4 g peak accelerationPower Requirements: 100 to 240 VAC, 50 to 60 Hz,
500 W max.
Channel ConfigurationsOption 201, 221 1-Channel record
1-Channel playback
Option 202, 222 2-Channel record2-Channel playback
Option 203, 221 3-Channel record1-Channel playback
Option 204 4-Channel record only
Model RTR 2726 Ordering Information and Options
Storage OptionsOption 241 960 GB SSD storage capacity;
eight 120 GB hot-swappable SSDs
Option 242 1.9 TB SSD storage capacity;eight 240 GB hot-swappable SSDs
Option 244 3.8 TB SSD storage capacity;eight 480 GB hot-swappable SSDs
General Options (append to all options) Option 261 GPS time & position stamping
Specifications subject to change without notice
Contact Pentek for other configurations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2736 Eight-Channel Serial FPDP Rugged Portable Recorder
General InformationThe Talon® RTR 2736 is a complete turn-
key recording system capable of recordingand playing back multiple serial FPDP datastreams in a rugged, lightweight portablepackage. It is ideal for capturing any typeof streaming sources including live transfersfrom sensors or data from other computersand is fully compatible with the VITA 17.1specification. Using highly-optimized diskstorage technology, the system achievesaggregate recording rates up to 1.6 GB/sec.
The RTR 2736 can be populated with upto eight SFP connectors supporting serialFPDP over copper, single-mode, or multi-mode fiber, to accommodate all popular serialFPDP interfaces. It is capable of both receiv-ing and transmitting data over these linksand supports real-time data storage to disk.
Programmable modes include flow con-trol in both receive and transmit directions,CRC support, and copy/loop modes. Thesystem is capable of handling 1.0625, 2.125and 2.5 GBaud link rates supporting datatransfer rates of up to 247 MB/sec per serialFPDP link.
Optional GPS time and position stamp-ing allows the user to mark the beginningof a recording in the recording file’s header.
SystemFlow SoftwareThe RTR 2736 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple and intuitivemeans to configure and control the system.
Contact factory for options,number of channels, recordingrates, and disk capacity.
Nw!
NeeNew!
Features■ Designed to operate under
conditions of shock and vibration■ Portable system measures
16.9” W x 9.5” D x 13.4” H■ Rugged aluminum alloy chassis
■ Lightweight, approximately30 pounds
■ Shock- and vibration-resistantSSDs perform well invehicles, ships and aircraft
■ Up to eight I/O channels
■ Supports Flow Control, CRC,and Copy/Loop Mode as areceiver and transmitter
■ Supports 1.0625, 2.125 and2.5 GBaud link rates
■ Copper, single-mode andmulti-mode fiber interfacesavailable
■ Real-time sustained recordingrates of up to 1.6 GB/sec
■ Up to 3.8 terabytes of storageto NTFS RAID disk array
■ RAID levels of 0 ,1, 5 and 6■ SystemFlow® GUI virtual
instrumentation panel forfast, intuitive operation
■ C-callable API for integrationof recorder into application
■ File headers include timestamping and recordingparameters
■ Optional GPS time andposition stamping
■ Windows® 7 Professionalworkstation with high-perfor-mance Intel® CoreTM i7processor
Custom configurations can be stored asprofiles and later loaded as needed, allowingthe user to select preconfigured settingswith a single click.
Built on a server-class Windows 7 Profes-sional workstation, the RTR 2736 allows theuser to install post-processing and analysistools to operate on the recorded data.
The RTR 2736 records data to the nativeNTFS file system, providing immediateaccess to the recorded data.
Data can be off-loaded via a gigabitEthernet port, eight USB 2.0 ports, two USB3.0 ports or two eSATA 3 Ports. Additionally,data can be copied to optical disk, using the8X double layer DVD±R/RW drive.
Rugged and Flexible ArchitectureThe RTR 2736 is configured in a portable,
lightweight chassis with eight hot-swapSSDs, front panel USB ports and I/O connec-tions on the side panel. It is built on anextremely rugged, 100% aluminum alloyunit, reinforced with shock absorbing rubbercorners and an impact-resistant protectiveglass. Using shock- and vibration-resistantSSDs, the RTR 2736 is designed to reliablyoperate as a portable field instrument.
The eight hot-swappable SSDs providestorage capacities of up to 3.8 TB. Drivescan be easily removed or exchanged duringor after a mission to retrieve recorded data.Multiple RAID levels, including 0,1,5 and6, provide a choice for the required level ofredundancy. ➤
Ch 1
In / Out Serial
FPDP
INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 3.8 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTR 2736
USB 2.0
Gigabit
Ethernet
PS/2
Keyboard
PS/2
Mouse
Video
Output
1
8
eSATA2
GPS
Antenna
(Optional)
Ch 2
In / Out Serial
FPDP
Ch 3
In / Out Serial
FPDP
Ch 4
In / Out Serial
FPDP
Ch 5
In / Out Serial
FPDP
Ch 6
In / Out Serial
FPDP
Ch 7
In / Out Serial
FPDP
Ch 8
In / Out Serial
FPDP
USB 3.02
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2736 Eight-Channel Serial FPDP Rugged Portable Recorder
➤ SystemFlow Graphical User Interface
The RTR 2736 GUI provides the userwith a control interface for the recordingsystem. It includes Configuration, Record,Playback, and Status screens, each withintuitive controls and indicators.
The user can easily move betweenscreens to set configuration parameters,control and monitor a recording, and playback a recorded stream.
All parameters contain limit-check-ing and integrated help to provide aneasier-to-use out-of-the-box experience.
The Configure Screen shows a blockdiagram of the system, and providescontrol for operational system param-eters. These parameters are entered foreach input or output channel, specify-ing the flow control settings and therecognition of a CRC in the data stream. Each channel can also be setupto utilize SFPDP’s copy/loop mode.
The Record Screen allows you to browse a folder and enter a file namefor the recording. The length of the recording for each channel can be speci-fied in megabytes or in seconds. Intuitive buttons for Record, Pause andStop simplify operation. Status indicators for each channel display themode, the number of recorded bytes, and the average data rate. A Data Lossindicator alerts the user to any problem, such as a disk full condition.
By checking the Master Record boxes, any combination of channels inthe lower screen can be grouped for synchronous recording via the upperMaster Record screen. The recording time can be specified, and monitoringfunctions inform the operator of recording progress. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2736 Eight-Channel Serial FPDP Rugged Portable Recorder
➤➤ SystemFlow APISystemFlow includes a complete API (Application Pro-
gramming Interface) supporting control and status queriesof all operations of the RTR 2736 from a custom application.
High-level C-language function calls and the supportingdevice drivers allow users to incorporate the RTR 2736 as ahigh-performance server front end to a larger system. This issupported using a socket interface through the Ethernetport, either to a local host or through an internet link forremote, stand-alone acquisition. Recorded NTFS files can beeasily retrieved through the same connection.
SpecificationsPC Workstation
Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or greaterSDRAM: 6 GBMonitor: Built-in 17” high-resolution LCD, 1440 x 900pixels, 200 nitsRAID
Storage: 0.96, 1.9 or 3.8 TBNumber of Drives: 8Supported RAID Levels: 0, 1, 5 and 6Drive Bays: 8, hot-swap, removable, rear panel
USB 2.0 Ports: 8 left side, 2 front panelUSB 3.0 Ports: 2 left side1 Gb Ethernet Port: 1 left sideeSATA Ports: 2 left sideAux Video Output: 15-pin VGA left side
Serial FPDP Interface
Copper - Option 280Cable: 150-ohm shielded quadConnector Type: HSSDC2Max. Cable Length: 30 m for 1.0625 Gbaud equalizedcable, 15 m for 2.5 Gbaud equalized cable
Multi-mode Fiber Optical - Option 281Cable: Multi-mode fiber, 850 nmConnector Type: LCMax. Cable Length: Up to 300 m
Single-mode Fiber Optical - Option 282Cable: Single-mode fiberConnector Type: LCMax. Cable Length: Up to 10 km
Physical and EnvironmentalDimensions: 16.9" W x 9.5" D x 13.4" HWeight: 30 lb, approximatelyOperating Temp: 0° to +50° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingOperating Shock: 15 g max. (11 msec, half sine wave)Operating Vibration: 10 to 20 Hz: 0.02 inch peak, 20 to 500 Hz:
1.4 g peak accelerationPower Requirements: 100 to 240 VAC, 50 to 60 Hz, 500 W max.
4-Channel Serial FPDP RecordersOption 041 960 GB SSD storage capacity;
eight 120 GB hot-swappable SSDs
Option 042 1.9 TB SSD storage capacity;eight 240 GB hot-swappable SSDs
Option 043 3.8 TB SSD storage capacity;eight 480 GB hot-swappable SSDs
4-Channel Maximum Disk Data Rate: 988 MB/sec
Model RTR 2736 Ordering Information and Options
8-Channel Serial FPDP RecordersOption 081 960 GB SSD storage capacity;
eight 120 GB hot-swappable SSDs
Option 082 1.9 TB SSD storage capacity;eight 240 GB hot-swappable SSDs
Option 083 3.8 TB SSD storage capacity;eight 480 GB hot-swappable SSDs
8-Channel Maximum Disk Data Rate: 1.6 GB/sec
Serial FPDP Interface (append to all options) Option 280 Copper , HSSDC2 connectors
Option 281 Multi-mode optical, LC connectors
Option 282 Single-mode optical, LC connectors
General Options (append to all options) Option 261 GPS time & position stamping
Specifications are subject to change without notice
Contact Pentek for other configurations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2746 Eight-Channel RF/IF, 200 MS/sec Rugged Rackmount Recorder
General InformationThe Talon® RTR 2746 is a turnkey, multi-
band record and playback system that isbuilt to operate under harsh conditions.Designed to withstand high vibration andoperating temperatures, the RTR 2746 isintended for military, airborne and UAVapplications requiring a rugged system. Withscalable A/Ds, D/As and SSD (Solid-StateDrive) storage, the RTR 2746 can be config-ured to stream data to and from disk atrates as high as 2 GB/sec.
The RTR 2746 uses Pentek’s high-poweredVirtex-6-based Cobalt® boards, that provideflexibility in channel count with optionaldigital downconversion capabilities. Optional16-bit, 1.25 GHz D/A converters with digitalupconversion allow real-time reproductionof recorded signals.
A/D sampling rates, DDC decimationsand bandwidths, D/A sampling rates, andDUC interpolations are among the GUI-select-able system parameters, providing a fullyprogrammable system capable of recordingand reproducing a wide range of signals.
Optional GPS time and position stamp-ing allows the user to record this criticalsignal information.
SystemFlow SoftwareThe RTR 2746 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple means toconfigure and control the system. Customconfigurations can be stored as profiles andlater loaded when needed, allowing theuser to select preconfigured settings with asingle click.
Contact factory for options,number and type of analogchannels, recording rates, anddisk capacity.
ew!
NeNew!
Features■ Designed to operate under
conditions of shock and vibration■ 4U 19-inch rugged rackmount
PC server chassis■ Windows® 7 Professional
workstation with high-perform-ance Intel® CoreTM i7 processor
■ 200 MHz max. 16-bit A/Dsampling for recording,up to eight channels
■ 1.25 GHz max. 16-bit D/Asampling for playback, up toeight channels
■ 80 MHz max. record andplayback signal bandwidths
■ Capable of record/playback ofIF frequencies to 700 MHz
■ Real-time sustainedrecording rates of up to2 GB/sec
■ Removable SSD drives■ Up to 12 terabytes of storage
to NTFS RAID disk array■ RAID levels of 0 ,1, 5 , 6, 10
and 50■ SystemFlow® GUI with signal
viewer analysis tool■ C-callable API for integration
of recorder into application■ File headers include time
stamping and recordingparameters
■ DDC decimation and DUCinterpolation range from2 to 65,536
■ Optional GPS time andposition stamping
SystemFlow also includes signal viewingand analysis tools, that allow the user tomonitor the signal prior to, during, and after arecording session. These tools include a virtualoscilloscope and a virtual spectrum analyzer.
Built on a Windows 7 Professional work-station, the RTR 2746 allows the user to installpost-processing and analysis tools to operateon the recorded data. The RTR 2746 recordsdata to the native NTFS file system, providingimmediate access to the recorded data.
Data can be off-loaded through tworear-access gigabit Ethernet ports or twoUSB 2.0 ports. Additionally, data can becopied to optical disk, using the 8X doublelayer DVD±R/RW drive.
Rugged and Flexible ArchitectureBecause SSDs operate reliably under
conditions of shock and vibration, the RTR2746 performs well in ground, shipborneand airborne environments. The 24 hot-swappable SSDs provide storage capacityof up to 12 TB. The drives can be easilyremoved or exchanged during or after amission to retrieve recorded data.
The RTR 2746 is configured in a 4U 19"rack-mountable chassis, with hot-swap datadrives, front panel USB ports and I/Oconnectors on the rear panel.
Systems are scalable to accommodatemultiple chassis to increase channel countsand aggregate data rates.
All recorder chassis are connected viaEthernet and can be controlled from a singleGUI either locally or from a remote PC.
Multiple RAID levels, including 0, 1, 5,6, 10 and 50, provide a choice for the requiredlevel of redundancy. ➤
Channels
In
Channels
Out
200 MHz
16-bit A/D
U to 8
Channels
DIGITAL
DOWN-
CONVERTER
Decimation:
2 to 65,536
INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 12 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTR 2746
USB 2.0
Gigabit
Ethernet
PS/2
Keyboard
PS/2
Mouse
Video
Output
2
6
eSATA2
GPS
Antenna
(Optional)
800 MHz
or 1.25 GHz
16-bit D/A
Up to 8
Channels
DIGITAL
UP-
CONVERTER
Decimation:
2 to 65,536
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2746 Eight-Channel RF/IF, 200 MS/sec Rugged Rackmount Recorder
➤ SystemFlow Graphical User Interface
SystemFlow Signal ViewerThe SystemFlow Signal Viewer includes a virtual oscillo-
scope and spectrum analyzer for signal monitoring in boththe time and frequency domains. It is extremely useful forpreviewing live inputs prior to recording, and for monitoringsignals as they are being recorded to help ensure successfulrecording sessions. The viewer can also be used to inspectand analyze the recorded files after the recording is complete.
SystemFlow Hardware Configuration InterfaceThe RTR 2746 configuration screens provide a simple and
intuitive means for setting up the system parameters. TheDDC configuration screen shown here, provides entries forinput source, center frequency, decimation, as well as gateand trigger information. All parameters contain limit-checking and integrated help to provide an easier-to-useout-of-the-box experience.
SystemFlow Recorder InterfaceThe RTR 2746 GUI provides the user with a control interface
for the recording system. It includes Configuration, Record,Playback and Status screens, each with intuitive controls andindicators. The user can easily move between screens to setconfiguration parameters, control and monitor a recording, playback a recorded signal and monitor board temperature and volt-age levels. The signal viewer, integrated into the recording GUI,allows the user to monitor real-time signals or signals recordedon disk.
Advanced signal analysis capabilities include automaticcalculators for signal amplitude and frequency, second andthird harmonic components, THD (total harmonic distor-tion) and SINAD (signal to noise and distortion). With timeand frequency zoom, panning modes and dual, annotatedcursors to mark and measure points of interest, the System-Flow Signal Viewer can often eliminate the need for aseparate oscilloscope or spectrum analyzer in the field. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2746 Eight-Channel RF/IF, 200 MS/sec Rugged Rackmount Recorder
➤ A/D PerformanceSpurious Free Dynamic Range
fin = 70 MHz, f
s = 200 MHz, Internal Clock
Spurious Pick-up
fs = 200 MHz, Internal Clock
Two-Tone SFDR
f1 = 30 MHz, f
2 = 70 MHz, f
s = 200 MHz
Two-Tone SFDR
f1 = 69 MHz, f
2 = 71 MHz, f
s = 200 MHz
Adjacent Channel Crosstalk
fin Ch2
= 70 MHz, fs = 200 MHz, Ch 1 shown
Input Frequency Response
fs = 200 MHz, Internal Clock
D/A PerformanceSpurious Free Dynamic Range
fout
= 70 MHz, fs = 200 MHz, Internal Clock
Spurious Free Dynamic Range
fout
= 120 MHz, fs = 400 MHz, External Clock ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2746 Eight-Channel RF/IF, 200 MS/sec Rugged Rackmount Recorder
➤ Specifications
PC Workstation (standard configuration)Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or higherSDRAM: 6 GBRAID
Storage: Up to 12 TBNumber of Drives: up to 24Supported Levels: 0, 1, 5, 6, 10 and 50
Analog Recording Input / OutputAnalog Signal Inputs
Input Type: Transformer-coupled, front panel femaleSSMC connectorsTransformer Type: Coil Craft WBC4-6TLBFull Scale Input: +8 dBm into 50 ohms3 dB Passband: 300 kHz to 700 MHz
A/D ConvertersType: Texas Instruments ADS5485Sampling Rate: 10 MHz to 200 MHzResolution: 16 bits
Digital DownconverterType: Virtex-6 FPGA, Pentek-installed DDC IP CoreDecimation: 2 to 65,536 in two stages of 2 to 256Bandwidth: Up to 80 MHz
Analog Signal OutputsOutput Type: Transformer-coupled, front panel femaleSSMC connectorsFull Scale Output: +4 dBm into 50 ohms3 dB Passband: 300 kHz to 700 MHz
Digital Upconverter and D/AsType: TI DAC5688 and Pentek-installed interpolation IP coreInterpolation: 2 to 65,536 in two stages of 2 to 256Input Data Rate: 250 MHx max.Output IF: DC to 400 MHzOutput Signal: Analog, real or quadratureOutput Sampling Rate: 800 MHz max. with2, 4 or 8 interpolationResolution: 16 bits
Clock Sources: Selectable from onboard programmableVCXO, external or LVDS clocks
External ClocksType: Front panel female SSMC connector, sine wave,0 to +10 dBm, AC-coupled, 50 ohms, 10 to 200 MHz
Multi-Recorder Sync/Gate Bus: 26-pin connector, dual clock/sync/gate input/output LVDS buses; one sync/gate inputTTL signal
Physical and Environmental
Dimensions4U Short Chassis: 19" W x 21" D x 7" H
Weight: 50 lb, approx.Operating Temp: 0° to +50° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingOperating Shock: 15 g max. (11 msec, half sine wave)Operating Vibration: 10 to 20 Hz: 0.02 inch peak, 20 to 500 Hz: 1.4 g peak accelerationPower Requirements: 100 to 240 VAC, 50 to 60 Hz,
500 W max.
Specifications are subject to change without notice
Recording OptionsOption 201 1-Channel recording
Option 202 2-Channel recording
Option 203 3-Channel recording
Option 204 4-Channel recording
Option 208 8-Channel recording
Playback OptionsOption 221 1-Channel playback
Option 222 2-Channel playback
Option 224 4-Channel playback
Option 228 8-Channel Playback
Storage OptionsOption 240 2 TB Storage capacity
Option 241 4 TB Storage capacity
Option 242 6 TB Storage capacity
Option 243 8 TB Storage capacity
Option 244 12 TB Storage capacity
General OptionsOption 260 Digital downconversion & upconversion
Option 261 GPS time & position stamping
Model RTR 2746 Ordering Information and Options
Contact Pentek for compatible Option combinations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2749 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/secRugged Rackmount Recorder
General InformationThe Talon® RTR 2749 is a turnkey system,
used for recording high-bandwidth signals.The RTR 2749 uses 12-bit, 3.6 GHz A/Dconverters and can provide sustainedrecording rates up to 3.2 GB/sec. It can beconfigured as a one- or two-channel systemand can record sampled data, packed as8-bit-wide consecutive samples, or as16-bit-wide consecutive samples (12-bitdigitized samples residing in the 12 MSBsof the 16-bit word.)
The RTR 2749 uses Pentek’s high-powered Virtex-6-based Cobalt® boardsthat provide the data streaming enginefor the high-speed A/D converters.Channel and packing modes as well asgate and trigger settings are among theGUI-selectable system parameters,providing complete control over thisultra wideband recording system.
Optional GPS time and position stamp-ing allows the user to capture this criticalinformation in the header of each data file.
SystemFlow SoftwareThe RTR 2749 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple means toconfigure and control the system.
Custom configurations can be stored asprofiles and later loaded when needed,allowing the user to select preconfiguredsettings with a single click.
SystemFlow also includes signal view-ing and analysis tools that allow the user tomonitor the signal prior to, during, and
Contact factory for options, fornumber and type of analogchannels, recording rates, anddisk capacity.
ew!
NeNew!
Features■ Designed to operate under
conditions of shock andvibration
■ Sample rates up to 3.2 GHzin single-channel mode
■ Sample rates up to 1.6 GHzin dual-channel mode
■ Capable of recording RF/IFfrequencies to 1.75 GHz insingle-channel mode
■ Capable of recording RF/IFfrequencies to 2.8 GHz indual-channel mode
■ 12-bit A/D, with 12- and 8-bitpacking modes
■ Real-time sustainedrecording rates of up to3.2 GB/sec
■ 4U 19-inch rugged rackmountPC server chassis
■ Windows® 7 Professionalworkstation with-high perform-ance Intel® CoreTM i7 processor
■ Up to 20 terabytes of SSDstorage to NTFS RAID solidstate disk array
■ RAID levels of 0 ,1, 5 , 6, 10and 50
■ N+1 redundant power supply■ SystemFlow® GUI with signal
viewer analysis tool■ C-callable API for integration
of recorder into application■ File headers include time
stamping and recordingparameters
■ Optional GPS time andposition stamping
after a recording session. These tools includea virtual oscilloscope and a virtual spectrumanalyzer.
Built on a Windows 7 Professionalworkstation, the RTR 2749 allows the userto install post-processing and analysis toolsto operate on the recorded data. The RTR2749 records data to the native NTFS filesystem that provides immediate access tothe recorded data.
Data can be off-loaded via two gigabitEthernet ports, six USB 2.0 ports or twoeSATA ports. Additionally, data can becopied to optical disk, using the 8X doublelayer DVD±R/RW drive.
Rugged and Flexible ArchitectureBecause SSDs operate reliably under con-
ditions of vibration and shock, the RTR 2749performs well in ground, shipborne and air-borne environments. The 40 hot-swappableSSDs provide storage capacity of up to 20 TB.The drives can be easily removed or exchangedduring or after a mission to retrieve recordeddata.
The RTR 2749 is configured in a 4U 19"rugged rackmount chassis, with hot-swappabledata drives, front panel USB ports and I/Oconnectors on the rear panel.
Systems are scalable to accommodatemultiple chassis to increase channel countsand aggregate data rates. All recorder chassisare connected via Ethernet and can becontrolled from a single GUI either locallyor from a remote PC.
Multiple RAID levels, including 0, 1, 5,6, 10 and 50 provide a choice for the requiredlevel of redundancy. ➤
Channel 1
In 3.6 GHz
(1 Channel)
or
1.8 GHz
(2 Channel)
12 Bit A/D
INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 20 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTR 2749
USB
Gigabit
Ethernet
Keyboard
Mouse
Video
Output
eSATA
GPS
Antenna
(Optional)
Channel 2
In
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2749 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/secRugged Rackmount Recorder
➤ SystemFlow Graphical User Interface
SystemFlow Signal ViewerThe SystemFlow Signal Viewer includes a virtual oscillo-
scope and spectrum analyzer for signal monitoring in boththe time and frequency domains. It is extremely useful forpreviewing live inputs prior to recording, and for monitoringsignals as they are being recorded to help ensure successfulrecording sessions. The viewer can also be used to inspectand analyze the recorded files after the recording is complete.
SystemFlow Hardware Configuration InterfaceThe RTR 2749 configuration screens provide a simple and
intuitive means for setting up the system parameters. TheDDC configuration screen shown here, provides entries forinput source, center frequency, decimation, as well as gateand trigger information. All parameters contain limit-checking and integrated help to provide an easier-to-useout-of-the-box experience.
SystemFlow Recorder InterfaceThe RTR 2749 GUI provides the user with a control interface
for the recording system. It includes Configuration, Record,Playback and Status screens, each with intuitive controls andindicators. The user can easily move between screens to setconfiguration parameters, control and monitor a recording, playback a recorded signal and monitor board temperature and volt-age levels. The signal viewer, integrated into the recording GUI,allows the user to monitor real-time signals or signals recordedon disk.
Advanced signal analysis capabilities include automaticcalculators for signal amplitude and frequency, second andthird harmonic components, THD (total harmonic distor-tion) and SINAD (signal to noise and distortion). With timeand frequency zoom, panning modes and dual, annotatedcursors to mark and measure points of interest, the System-Flow Signal Viewer can often eliminate the need for aseparate oscilloscope or spectrum analyzer in the field. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2749 Ultra Wideband One- or Two-Channel RF/IF, 3.2 GS/secRugged Rackmount Recorder
➤➤ SpecificationsPC Workstation (standard configuration)Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or higherSDRAM: 8 GBRAID
Storage: 2–20 TBNumber of Drives: Up to 40Drive Type: SATA III SSDsSupported RAID Levels: 0, 1, 5, 6, 10 and 50
Analog Signal InputsConnectors: Two rear panel SSMC connectors, In 1 & In 2Input Type: Single-ended, non-invertingFull Scale Input: +4 dBm into 50 ohmsCoupling: Transformer coupledAnalog Input TransformersBandwidth: 4.5 kHz to 3.0 GHzInsertion Loss: 3.5 dB maximum
A/D ConvertersType: Texas Instruments ADC12D1800Sampling RateSingle-channel mode: 500 MHz to 3.6 GHzDual-channel mode: 150 MHz to 1.8 GHzResolution: 12 bitsMaximum Usable Input FrequencySingle-channel mode: 1.75 GHzDual-channel mode: 2.8 GHz
Sampling Clock Source: Internal fixed-frequency orprogrammable oscillator (selectable by option);in single-channel mode, the sample rate is 2x the clockfrequency; in dual-channel mode, the sample rate equalsthe clock frequency
Frequency Reference: Accepts external 10 MHz reference at0 to +4 dBm to phase-lock the clock oscillator
Physical and EnvironmentalSize: 19" W x 26" D x 7" HWeight: 60-85 lbOperating Temp: 0° to +50° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingOperating Shock: 15 g max. (11 msec, half sine wave)Operating Vibration: 10 to 20 Hz: 0.02 inch peak, 20 to 500 Hz: 1.4 g peak accelerationPower Requirements: 100 to 240 VAC, 50 to 60 Hz, 500 W max.
Specifications are subject to change without notice.
Sample Rate OptionsOption 910 User-Programmable Sample Clock
Dual-channel mode sample clock range150 MHz – 945 MHz970 MHz – 1134 MHz1213 MHz – 1417.5 MHz
Single-channel mode sample clock range500 MHz – 1890 MHz1940 MHz – 2268 MHz2426 MHz – 2835 MHz
Option 911 Fixed-frequency clock1.5 / 3.0 GHz sample clock
Option 912 Fixed-frequency clock1.6 / 3.2 GHz sample clock
Sample rates are set up for dual-channel mode first andsingle-channel mode second: e.g. 1.5 / 3.0 is 1.5 in dual-channel mode and 3.0 in single-channel mode.
Custom fixed-frequency sample clocks available upon request.
Storage OptionsOption 241 4.8 TB SSD StorageOption 242 9.6 TB SSD StorageOption 243 19.2 TB SSD Storage
General OptionsOption 261 GPS Time & Position Stamping
Model RTR 2749 Options
Contact Pentek for compatible Option combinations
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2755 Two-Channel Ten-Gigabit Ethernet Rugged Rackmount Recorder
General InformationThe Talon® RTR 2755 is a complete turn-
key recording system for storing one or twoten-gigabit Ethernet (10 GbE) streams. It isideal for capturing any type of streamingsources including live transfers from sensorsor data from other computers and supportsboth TCP and UDP protocols.
Using highly-optimized disk storagetechnology, the system guarantees loss-freeperformance at aggregate recording ratesup to 2 GB/sec.
Two rear panel SFP+ LC connectors for850 nm multi-mode or single-mode fibrecables, or CX4 connectors for copper twinaxcables accommodate all popular 10 GbEinterfaces.
Optional GPS time and position stamp-ing accurately identifies each record in thefile header.
SystemFlow SoftwareThe RTR 2755 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple and intuitivemeans to configure and control the system.
Custom configurations can be stored asprofiles and later loaded as needed, allow-ing the user to select preconfigured settingswith a single click.
Built on a server-class Windows 7 Profes-sional workstation, the RTR 2755 allows the
Contact factory for options,number of channels, recordingrates, and disk capacity.
ew!
NeNew!
Features■ Designed to operate under
conditions of shock and vibration■ Records ten-gigabit Ethernet
streams■ One or two channels■ TCP and UDP protocols
■ Copper or optical 10 GbEinterfaces
■ Aggregate recording ratesto 2 GB/sec
■ Removable SSD drives■ 4U short 19-inch rugged
rackmount PC server chassis■ Windows® 7 Professional
workstation with high-perfor-mance Intel® CoreTM i7processor
■ Up to 12 terabytes of storageto NTFS RAID solid statedisk array
■ RAID levels of 0 ,1, 5 , 6,10 and 50
■ SystemFlow® GUI virtualinstrumentation panel forfast, intuitive operation
■ C-callable API for integrationof recorder into applications
■ File headers include timestamping and recordingparameters
■ Optional GPS time andposition stamping
user to install post-processing and analysistools to operate on the recorded data.
The RTR 2755 records data to the nativeNTFS file system, providing immediateaccess to the recorded data.
Data can be off-loaded via two gigabitEthernet ports or six USB 2.0 ports. Addi-tionally, data can be copied to optical disk,using the 8X double layer DVD±R/RW drive.
Rugged and Flexible ArchitectureBecause SSDs operate reliably under
conditions of shock and vibration, the RTR2755 performs well in ground, shipborneand airborne environments. The 24 hot-swappable SSDs provide storage capacityof up to 12 TB. The drives can be easilyremoved or exchanged during or after amission to retrieve recorded data.
The RTR 2755 is configured in a 4U 19"rack-mountable chassis, with hot-swap datadrives, front panel USB ports and I/O con-nectors on the rear panel.
Systems are scalable to accommodatemultiple chassis to increase channel countsand aggregate data rates.
All recorder chassis are connected viaEthernet and can be controlled from a singleGUI either locally or from a remote PC.
Multiple RAID levels, including 0, 1, 5,6, 10 and 50, provide a choice for the requiredlevel of redundancy. ➤
Ch 1
In / Out 10G
Ethernet INTEL
PROCESSOR
SSD
SYSTEM DRIVEDDR
SDRAM
WINDOWS HOST PROCESSOR
RAID DATA STORE
SSD DRIVES SSD DRIVES
SSD DRIVES SSD DRIVES
MODEL RTR 2755
USB 2.0
Gigabit
Ethernet
PS/2
Keyboard
PS/2
Mouse
Video
Output
2
6
eSATA2
GPS
Antenna
(Optional)
Ch 2
In / Out 10G
Ethernet
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2755 Two-Channel Ten-Gigabit Ethernet Rugged Rackmount Recorder
➤ SystemFlow Graphical User Interface
The RTR 2755 GUI provides the userwith a control interface for the recordingsystem. It includes Configuration, Record,Playback, and Status screens, each withintuitive controls and indicators.
The user can easily move betweenscreens to set configuration parameters,control and monitor a recording, and playback a recorded stream.
All parameters contain limit-check-ing and integrated help to provide aneasier-to-use out-of-the-box experience.
The Configure Screen shows a blockdiagram of the system, and presentsoperational system parameters includingtemperature and voltages. Parametersare entered for each input or outputchannel specifying UDP or TCP protocol,client or server connection, the IP addressand port number.
The Record Screen allows you to browse a folder and enter a file namefor the recording. The length of the recording for each channel can be speci-fied in megabytes or in seconds. Intuitive buttons for Record, Pause andStop simplify operation. Status indicators for each channel display themode, the number of recorded bytes, and the average data rate. A Data Lossindicator alerts the user to any problem, such as a disk full condition.
By checking the Master Record boxes, any combination of channels inthe lower screen can be grouped for synchronous recording via the upperMaster Record screen. The recording time can be specified, and monitoringfunctions inform the operator of recording progress. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2755 Two-Channel Ten-Gigabit Ethernet Rugged Rackmount Recorder
➤ SystemFlow APISystemFlow includes a complete API (Application Pro-
gramming Interface) supporting control and status queriesof all operations of the RTR 2755 from a custom application.
High-level C-language function calls and the supportingdevice drivers allow users to incorporate the RTR 2755 as ahigh-performance server front end to a larger system. This issupported using a socket interface through the Ethernetport, either to a local host or through an internet link forremote, stand-alone acquisition. Recorded NTFS files can beeasily retrieved through the same connection.
SpecificationsPC Workstation
Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or higherSDRAM: 6 GBRAID
Storage: 6–12 TBDrive Type: Solid state driveNumber of Drives: 12–24Supported Levels: 0, 1, 5, 6, 10 and 50
Ten-Gigabit Ethernet Interface
Copper - Option 280Quantity: 2 portsCable: Twinax copperConnector Type: CX4Max. Cable Length: 15 m
Multi-mode Fibre Optical - Option 281
Quantity: 2 portsCable: Multi-mode fibre, 850 nmConnector Type: LCMax. Cable Length: Up to 300 m
Single-mode Fibre Optical - Option 282
Quantity: 2 portsCable: Single-mode fibreConnector Type: LCMax Cable Length: Up to 10 km
Physical and EnvironmentalDimensions
4U Short Chassis: 19" W x 21" D x 7" HWeight: 50 lb, approx.Operating Temp: 0° to +50° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingOperating Shock: 15 g max. (11 msec, half sine wave)Operating Vibration: 10 to 20 Hz: 0.02 inch peak, 20 to 500 Hz: 1.4 g peak accelerationPower Requirements: 100 to 240 VAC, 50 to 60 Hz,
500 W max.
Option 201 - Single Channel 10 GbE RecordersOption 201-240 Storage capacity: 6 TB
12 ea. 512 GB, 2.5” solid state drives4U short chassis
Option 202 - Dual Channel 10 GbE RecordersOption 202-241 Storage capacity: 12 TB
24 ea. 512 GB, 2.5” solid state drives4U short chassis
Model RTR 2755 Ordering Information and Options
Contact Pentek for other configurations
10 GbE Interface (append to all previous options) Option 280 Copper , CX4 connectors
Option 281 Multi-mode optical, LC connectors
Option 282 Single-mode optical, LC connectors
General Options (append to all previous options) Option 261 GPS tme & position stamping
Specifications are subject to change without notice
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2756 Eight-Channel Serial FPDP Rugged Rackmount Recorder
General InformationThe Talon® RTR 2756 is a complete turn-
key recording system capable of recordingand playing back multiple serial FPDP datastreams. It is ideal for capturing any type ofstreaming sources including live transfersfrom sensors or data from other computersand is fully compatible with the VITA 17.1specification. Using highly-optimized diskstorage technology, the system achievesaggregate recording rates up to 2 GB/sec.
The RTR 2756 can be populated with upto eight SFP connectors supporting serialFPDP over copper, single-mode, or multi-mode fiber, to accommodate all popular serialFPDP interfaces. It is capable of both receiv-ing and transmitting data over these linksand supports real-time data storage to disk.
Programmable modes include flow con-trol in both receive and transmit directions,CRC support, and copy/loop modes. Thesystem is capable of handling 1.0625, 2.125and 2.5 GBaud link rates supporting datatransfer rates of up to 247 MB/sec per serialFPDP link.
Optional GPS time and position stamp-ing allows the user to mark the beginningof a recording in the recording file’s header.
SystemFlow SoftwareThe RTR 2756 includes the SystemFlow
Recording Software. SystemFlow features aWindows-based GUI (Graphical User Inter-face) that provides a simple and intuitivemeans to configure and control the system.
Custom configurations can be stored asprofiles and later loaded as needed, allow-ing the user to select preconfigured settingswith a single click.
Contact factory for options, fornumber and type of channels,recording rates, and disk capacity.
Nw!
NeeNew!
Features■ Designed to operate under
conditions of shock and vibration■ Complete serial FPDP
record and playback system■ Up to eight I/O channels in a
single 4U 19-inch rugged rack-mount PC server chassis
■ Removable SSDs■ Up to 20 terabytes of storage
to NTFS RAID disk array■ Copper, single-mode and
multi-mode fiber interfacesavailable
■ Real-time sustained recordingrates of up to 2 GB/sec ineight-channel configuration
■ Supports Flow Control, CRC,and Copy/Loop Mode as areceiver and transmitter
■ Supports 1.0625, 2.125 and2.5 GBaud link rates
■ RAID levels of 0 ,1, 5 , 6, 10and 50
■ Optional N+1 redundantpower supply
■ SystemFlow® GUI virtualinstrumentation panel forfast, intuitive operation
■ C-callable API for integrationof recorder into application
■ File headers include timestamping and recordingparameters
■ Optional GPS time andposition stamping
■ Windows® 7 Professionalworkstation with high-perfor-mance Intel® CoreTM i7processor
Built on a server-class Windows 7 Profes-sional workstation, the RTR 2756 allows theuser to install post-processing and analysistools to operate on the recorded data.
The RTR 2756 records data to the nativeNTFS file system, providing immediateaccess to the recorded data.
Data can be off-loaded via two gigabitEthernet ports or six USB 2.0 ports. Addition-ally, data can be copied to optical disk, usingthe 8X double layer DVD±R/RW drive.
Rugged and Flexible ArchitectureBecause SSDs operate reliably under
conditions of shock and vibration, the RTR2756 performs well in ground, shipborneand airborne environments. Configurablewith as many as 40 hot-swappable SSDs,the RTR 2756 can provide storage capacitiesof up to 19 TB in a rugged 4U chassis.Drives can be easily removed or exchangedduring or after a mission to retrieve recordeddata.
The RTR 2756 is configured in a 4U 19”rack-mountable chassis, with hot-swapdata drives, front-panel USB ports and I/Oconnectors on the rear panel.
Systems are scalable to accommodatemultiple chassis to increase channel countsand aggregate data rates. All recorder chas-sis are connected via Ethernet and can becontrolled from a single GUI either locallyor from a remote PC
Multiple RAID levels, including 0,1,5, 6,10 and 50 provide a choice for the requiredlevel on redundancy. Redundant powersupplies are optionally available to providea robust and reliable high-performancerecording system. ➤
Ch 1
In / Out Serial
FPDP
INTEL
PROCESSOR
SYSTEM DRIVEDDR
SDRAM
HOST PROCESSOR
RUNNING SYSTEMFLOW
UP TO 20 TB RAID
DATA DRIVES DATA DRIVES
DATA DRIVES DATA DRIVES
MODEL RTR 2756
USB 2.0
Gigabit
Ethernet
PS/2
Keyboard
PS/2
Mouse
Video
Output
2
6
GPS
Antenna
(Optional)
Ch 2
In / Out Serial
FPDP
Ch 3
In / Out Serial
FPDP
Ch 4
In / Out Serial
FPDP
Ch 5
In / Out Serial
FPDP
Ch 6
In / Out Serial
FPDP
Ch 7
In / Out Serial
FPDP
Ch 8
In / Out Serial
FPDP
eSATA2
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2756 Eight-Channel Serial FPDP Rugged Rackmount Recorder
➤ SystemFlow Graphical User Interface
The RTR 2756 GUI provides the userwith a control interface for the recordingsystem. It includes Configuration, Record,Playback, and Status screens, each withintuitive controls and indicators.
The user can easily move betweenscreens to set configuration parameters,control and monitor a recording, and playback a recorded stream.
All parameters contain limit-check-ing and integrated help to provide aneasier-to-use out-of-the-box experience.
The Configure Screen shows a blockdiagram of the system, and providescontrol for operational system param-eters. These parameters are entered foreach input or output channel, specify-ing the flow control settings and therecognition of a CRC in the data stream. Each channel can also be setupto utilize SFPDP’s copy/loop mode.
The Record Screen allows you to browse a folder and enter a file namefor the recording. The length of the recording for each channel can be speci-fied in megabytes or in seconds. Intuitive buttons for Record, Pause andStop simplify operation. Status indicators for each channel display themode, the number of recorded bytes, and the average data rate. A Data Lossindicator alerts the user to any problem, such as a disk full condition.
By checking the Master Record boxes, any combination of channels inthe lower screen can be grouped for synchronous recording via the upperMaster Record screen. The recording time can be specified, and monitoringfunctions inform the operator of recording progress. ➤
www.pentek.comOne Park Way ◆ Upper Saddle River ◆ New Jersey 07458Tel: 201.818.5900 ◆ Fax: 201.818.5904 ◆ Email: [email protected]
Pentek, Inc.
Model RTR 2756 Eight-Channel Serial FPDP Rugged Rackmount Recorder
➤ SystemFlow APISystemFlow includes a complete API (Application Pro-
gramming Interface) supporting control and status queriesof all operations of the RTR 2756 from a custom application.
High-level C-language function calls and the supportingdevice drivers allow users to incorporate the RTR 2756 as ahigh-performance server front end to a larger system. This issupported using a socket interface through the Ethernetport, either to a local host or through an internet link forremote, stand-alone acquisition. Recorded NTFS files can beeasily retrieved through the same connection.
SpecificationsPC Workstation
Operating System: Windows 7 ProfessionalProcessor: Intel Core i7 processorClock Speed: 2.0 GHz or greaterSDRAM: 6 GBRAID
Storage: 1.9-19.2 TBDrive Type: 2.5” SSDNumber of Drives: All options except 085, up to24; option 085 up to 40Supported Levels: 0, 1, 5, 6, 10 and 50
Serial FPDP Interface
Copper - Option 280Cable: 150-ohm shielded quadConnector Type: HSSDC2Max. Cable Length: 30 m for 1.0625 Gbaud equalizedcable, 15 m for 2.5 Gbaud equalized cable
Multi-mode Fiber Optical - Option 281Cable: Multi-mode fiber, 850 nmConnector Type: LCMax. Cable Length: Up to 300 m
Single-mode Fiber Optical - Option 282Cable: Single-mode fiberConnector Type: LCMax. Cable Length: Up to 10 km
Physical and Environmental
Dimensions & WeightsAll options except 085: 19" W x 21" D x 7" (4U) HWeight: 50 lb, approx.Option 085: 19" W x 26" D x 7" (4U) HWeight: 65-90 lb
Operating Temp: 0° to +50° CStorage Temp: –40° to +85° CRelative Humidity: 5 to 95%, non-condensingOperating Shock: 15 g max. (11 msec, half sine wave)Operating Vibration: 10 to 20 Hz: 0.02 inch peak, 20 to 500 Hz;
1.4 g peak acceleration
4-Channel Serial FPDP RecordersOption 041 Storage capacity: 1.9 TB
4U short chassis
Option 042 Storage capacity: 3.8 TB4U short chassis
Option 043 Storage capacity: 7.8 TB4U short chassis
Option 044 Storage capacity: 11.5 TB4U short chassis
4-Channel Maximum Disk Data Rate: 988 MB/sec
Serial FPDP Interface (append to all options)Option 280 Copper, HSSDC2 connectors
Option 281 Multi-mode optical, LC connectors
Option 282 Single-mode optical, LC connectors
General Options (append to all options) Option 261 GPS time & position stamping
Model RTR 2756 Ordering Information and Options
8-Channel Serial FPDP RecordersOption 081 Storage capacity: 1.9 TB
4U short chassis
Option 082 Storage capacity: 3.8 TB4U short chassis
Option 083 Storage capacity: 7.8 TB4U short chassis
Option 084 Storage capacity: 11.5 TB4U short chassis
Option 085 Storage capacity: 19.2 TBSpecial chassis
8-Channel Maximum Disk Data Rate: 1976 MB/sec
Specifications are subject to change without notice
Contact Pentek for other configurations
www.pentek.com
Customer InformationPlacing an Order
When placing purchase orders for Pentek products, pleaseprovide the model numbers and descriptions used in this cata-log. You may place your orders by letter, telephone, email orfax; you should confirm a verbal order by mail, email or fax.
All orders should specify a purchase order number, bill-toand ship-to address, method of shipment, and a contactname and telephone number.
U.S. orders should be made out to Pentek, Inc. andmay be placed directly at our office address, or c/o ourauthorized sales representative in your area.
International orders may be placed with us, or with ourauthorized distributor in your country. They have pricing andavailability information and they will be pleased to assist you.
Prices and Price QuotationsAll prices are F.O.B. factory in U.S. dollars. Shipping
charges and applicable import, federal, state or local taxes,are paid by the purchaser.
We’re glad to respond to your request for price quotation— just contact the corporate office, or your local represen-tative. Price and delivery quotations are valid for 30 days,unless otherwise stated.
Quantity discounts for large orders are available and willbe included in our price quotation, if applicable.
TermsTerms are Net 30 days for accounts with established
credit; until credit is established, we require prepayment, orwill ship C.O.D.
ShippingFor new orders, we normally ship UPS ground with ship-
ping charges prepaid and added to our invoice. If you are in ahurry, we will ship UPS Red, UPS Blue, FedEx, or the carrier ofyour choice, as you request.
Order Cancellation and ReturnsAll orders placed with Pentek are considered binding and
are subject to cancellation charges. Hardware productsincluded in this catalog may be returned within 30 days afterreceipt, subject to a restocking charge. Before returning aproduct, please call Customer Service to obtain a ReturnMaterial Authorization (RMA) number. Software purchasesare final and we cannot allow returns.
WarrantyPentek warrants its products to conform to published
specifications and to be free from defects in materials andworkmanship for a period of one year from the date ofdelivery, when used under normal operating conditions andwithin the service conditions for which they were furnished.
The obligation of Pentek arising from a warranty claimshall be limited to repairing or, optionally, replacing withoutcharge any product which proves to be defective within theterm and scope of the warranty.
Pentek must be notified of the defect or nonconformitywithin the warranty period. The affected product must bereturned with shipping charges and insurance prepaid.Pentek will pay shipping charges for the return of product tobuyer, except for products returned from outside of the USA.
Limitations of WarrantyThis warranty does not apply to products which have
been repaired or altered by anyone other than Pentek or itsauthorized representatives.
The warranty does not extend to products that have beendamaged by misuse, neglect, improper installation, unautho-rized modification, or extreme environmental conditions.
Pentek specifically disclaims merchantability or fitness fora particular purpose. We will not be held liable for incidentalor consequential damages arising from the sale, use, or in-stallation of any of our products. Under any circumstancesPentek’s liability under this warranty will not exceed thepurchase price of the product.
Extended WarrantyYou may purchase an extended warranty on our hard-
ware products for a fee of 1% of the list price per month ofcoverage, or 10% of the list price per year of coverage.
All Pentek software products (excluding 3rd-party prod-ucts) include free maintenance and free upgrades for oneyear. Extended software maintenance is available for one,two, and three years, starting after the first year.
Service and RepairBefore returning a product for service and repair, please
contact Customer Service to obtain a Return Material Autho-rization (RMA) number and have the following informationavailable: model number, serial number, name and addressof person returning the product and a description of theproblem experienced.
Carefully package the product in its original antistaticmaterial, if it is still available, and ship it to us: prepaid (ifwithin the US) or free domicile DDP (if outside the US). Showthe RMA number on the outside of the package and include awritten description of the malfunction.
When the work is completed, we will return the productto you free of charge, along with a statement of work done, ifunder warranty. Out-of-warranty work will be charged on amaterial and service time basis, and we will be happy to quoteyou a cost estimate for the repair and return shipping beforeproceeding.
Service phone: (201) 818-5900 ● fax: (201) 818-5697 ● email:[email protected]
Trademarks• Microsoft, MS-DOS, Windows, Windows 2000, Windows NT, Windows XP and
PowerPoint are trademarks or registered trademarks of Microsoft Corp.• Sun, Sun Microsystems, SunOS and Solaris are trademarks or registered trademarks of
Sun Microsystems, Inc.• PowerPC and PC-AT are trademarks or registered trademarks of IBM Corp.• UNIX is a registered trademark of The Open Group.• VxWorks and Tornado are trademarks of Wind River Systems.
• Ethernet is a trademark of Xerox Corp.• MIX is a trademark of RadiSys Corp.• VelociTI is a trademark of Texas Instruments, Inc.• SHARC is a trademark of Analog Devices, Inc.• Pentek, SwiftNet, SwiftTools, VIM, ReadyFlow, GateFlow, SystemFlow and RTS are
registered trademarks of Pentek, Inc.• Other trademarks are properties of their respective owners.