Pepco & Delmarva Power Commercial & Industrial Energy Savings Program

Grocery and Convenience Stores

October 11, 2012

Housekeeping

• The presentation will be emailed to you after the webinar.

• If you have technical issues, please send your question directly to

the Host or call 866-229-3239 for support.

• There will be a Q&A afterwards. Please submit your questions to the

Host throughout the session via the Chat or Q&A feature.

• Introduction & Objective

• Incentives Available:

• Application Process

• Questions and Answers

Agenda

We’ve already helped our customers earn

more than $11.3 MILLION in

incentives, and save more than

112.5 MILLION kWh

of electricity per year.

We are ready to assist YOU!

C&I Energy Savings Program

Program Eligibility

Pepco & Delmarva Power’s Maryland commercial and industrial customers are eligible for CASH incentives for projects that reduce electric consumption

• Commercial account holders are eligible

• Including government, institutional, and non-profits

6

C&I Energy Savings Program

Benefits of energy efficient grocery and convenience stores

• Reduce energy and water costs

• Increase customer and employee comfort

• Enhance light and air quality

• Reduce maintenance and extend equipment life

• Contribute to a more sustainable future

• The Trade Ally Network is available to

assist with the technical needs of Pepco

and Delmarva Power customers applying

for incentives

• The network consists of program approved

distributors, contractors and other service

providers

• Customers are not required to use a listed

program trade ally to participate in the

program except for Commissioning and the

Small Business Program

Trade Ally Network

Grocery and Convenience Stores

Whether you operate a supermarket, grocery

store or convenience store, you know that

refrigeration uses a lot of energy and that

translates into high energy bills.

For grocery stores and convenience markets,

refrigeration energy costs can account for up to

60 percent of the total electricity consumption.

Upgrading refrigeration equipment and controls

can cost-effectively cut energy use by 30

percent or more.1

Pepco has solutions to help increase the

energy efficiency of grocery and convenience

stores.

1Source: ENERGY STAR®

What does this mean to me?

1Average price of electricity = $0.15/kWh

ECM Motors Anti-Sweat Heat

Control

Lighting Upgrade HVAC Unit

Replacement

Project Cost $2,668 $2,840 $5,625 $18,625

Annual Energy Savings

(kWh)

8,033 5,285 12,301 8,950

Annual Energy Cost

Savings2

$1,205 $793 $1,845 $1,343

Incentive $1,150 $200 $984 $2,170

Payback (Years) 1.2 3.3 2.5 12.1

•Multiple-measure incentive provides an additional $450 in incentives. (ECM Motors,

heat controls an HVAC unit.

•Estimated annual energy cost savings of $1,845

•Qualified Small Business Customers are eligible for $8,660 in incentives

10

Existing Buildings Overview

• Equipment Upgrades

– Light Fixtures & Controls

– VFDs

– Packaged HVAC Units

– Chillers

– Specialized Controls

– Commercial Refrigeration &

Kitchen Equipment

– Custom Projects

• Energy Savings Studies

• Small Business Program

Lighting Fixtures & Controls

• New fixture, delamp, relamp / reballast and retrofit replacements

• Interior and exterior building attached fixtures

• LED fixtures listed by Energy Star or Design Lights Consortium

• Occupancy and Daylight Harvesting Controls

• LED Traffic Signal Retrofit incentive

• $15 To $70 per fixture incentives for T8, T5, CFL and metal halide

pulse start

• Alternative Lighting Projects - $0.16 per kWh saved

13

Lighting Fixtures & Controls

MR 16 Integral LED Lamp $25

PAR 20 Integral LED Lamp $20

PAR 38 and PAR 30 Integral

LED Lamp $30

New or Retrofit LED Exit Sign $25

Recessed, Surface, Pendant,

or Track Head LED Fixture $60

Parking Garage or Gas

Station Canopy LED Fixture $250

Parking Lot / Area Pole-

Mounted and Wallpacks LED

fixtures

$150

LED Fixtures &

Lamps

VFDs, HVAC, and Chillers

Prescriptive and Alternative incentives are available VFD’s, HVAC, & Chillers

VFD Incentives

• 2 hp and larger motors controlled by VFDs in HVAC systems and process (non-HVAC) functions

HVAC Incentives

• Packaged Equipment up to 63 tons

• Dual enthalpy economizer controls

• Water source heat pump units, and evaporative-cooled air conditioning units

• Ground source heat pump units (geothermal)

• Packaged terminal heat pump units and air conditioning units

Chiller Incentives

• Single chillers up to 1000 tons

15

Specialized Controls

The use of occupancy sensors and personal controls in offices, hotel

rooms, and other types of facilities can provide energy savings by

preventing lights and other office equipment from consuming electricity

when not in use.

•“Smart” Power Strips - $15 per power strip

•Personal Occupancy Sensors - $30 per control

•Vending Machine Controls - $30/non-refrigerated and $75/refrigerated

•Hotel HVAC/Receptacle Controls - $80 per room

Custom Projects

• Projects may include:

– Energy Management Systems

– Central Refrigeration Systems

• One-time incentive at the rate of $0.16/kWh of one year of projected

savings. Current building codes or equipment performance comparisons

will typically be used as the baseline

Energy Savings Study Incentives

• Up to $1,000 for a Walk-Through Energy Assessment

• Up to $20,000 available for buildings of 25,000 square feet or larger and

greater than 2 years old when measures are implemented

– Benchmarking with EPA’s Portfolio Manager required

Custom Projects

& Energy Saving Studies

Multiple Measure-Type Bonus

Earn a 10% BONUS INCENTIVE by installing multiple measure-types

in the same facility

• When two or different measure-types are completed from this list:

- Lighting Fixtures & Controls - Specialized Controls

- HVAC, including chillers - Custom Measure

- VFDs - Full Retro Commissioning

- Commercial Refrigeration - Commercial Kitchen Equipment

• The 10% BONUS INCENTIVE is applied to the prescriptive measures

• The second project must be started within 6 months of completion of the first

project

• The bonus incentive may not exceed the cost of the smallest qualifying

projects

• Pepco and Delmarva Power’s commercial and industrial customers

in Maryland

• Small businesses, non-profits, faith based, or institutional customers

that register a maximum monthly demand of 100 kW or less over the

last twelve months in an existing building are eligible for this

program

• Walk-Through Energy Assessment will be provided at no charge

– Once low cost and no cost measures are completed, customer

is eligible to receive the enhanced incentives

• An approved Small Business Program trade ally must be used for

the Walk-Through Energy Assessment and implementation

Small Business Program Eligibility

Small Business Program

• Walk-Through Energy Assessment that identifies energy-savings

opportunities

– The assessment is performed at your convenience at no charge

• Approved Small Business Program trade ally will install up to

$250.00 of recommended low cost measures

• Cash incentives that can greatly reduce the financial burden of

installing new equipment

– Many incentives cover up to 80% of the program-estimated installed

cost

• Experienced Trade Ally Network can perform the work, allowing you

time to focus on other priorities

Small Business Program

Standard measures - a pre-determined set of measures defined on a dollars-per-unit

basis.

• Lighting measures: the incentive will be designed to be approximately 80%-90% of

the Program-estimated installed cost for each measure.

• VFD and Refrigeration measures that cost less than $2,000: the incentive will be

approximately 80%-90% of the Program-estimated installed cost.

• For more expensive VFD and Refrigeration measures, the incentive will cover

40%-50% of Program-estimated installed costs.

• Packaged HVAC incentives are approximately doubled from those offered to non-

small business customers.

Custom measures are eligible for incentives of $0.30 per kWh/yr saved. The

incentives support up to 80% of the installed cost, and are offered on measures with

payback periods of at least 6 months.

Standard measure projects completed within two months, and custom projects

completed within four months, are eligible for an additional 10% in incentives

21

Small Business Program (SBP)

SBP - Lighting Fixtures & Controls

• New fixture, delamp, relamp / reballast and retrofit replacements

• Interior and exterior building attached fixtures

• LED fixtures listed by Energy Star or Design Lights Consortium

• High-output CFL incentive for new fixtures and retrofit replacements

• Occupancy and Daylight Harvesting Controls

• $55 to $265 per fixture incentives for T8, T5, CFL and metal halide

pulse start

• Alternative Lighting Projects - $0.30 per kWh saved

SBP - Lighting Fixtures & Controls

MR 16 Integral LED Lamp $40

PAR 20 Integral LED Lamp $40

PAR 38 and PAR 30 Integral

LED Lamp $50

New or Retrofit LED Exit Sign $35

Recessed, Surface, Pendant,

or Track Head LED Fixture $60

Parking Garage or Gas

Station Canopy LED Fixture $460

Parking Lot / Area Pole-

Mounted and Wallpacks LED

fixtures

$300

LED Reach-In Freezer or

Cooler Lighting $50/door

LED Fixtures &

Lamps

Commercial Kitchen Equipment

(SBP)

We offer cash incentives for upgrading to new energy efficient ENERGY STAR® qualified electric equipment for food preparation.

• Hot Food Holding Cabinets – $400 to $600

• Convection Ovens - $800

• Combination Ovens - $1,800

• Griddles - $500

• Fryers - $500

• Steam Cookers - $1,500

Commercial Refrigeration Equipment (SBP)

• Refrigeration and freezer equipment - $1,000 to $4000 per unit

• Ice Machines - $700 to $2,400 per unit

• Anti-sweat heat controls: coolers and freezers - $80 per door

• Reach-in door closer: coolers and freezers - $80 per door

• Strip (thermal) curtains for walk-in coolers or freezers - $10 per door

• ECM evaporative fan motor: display cooler and/or freezer - $100

• Evaporator fan controller on existing shaded-pole meter - $150

• LED lighting in reach-in cooler case and/or freezers - $50

• Occupancy Sensors for LED fixtures in reach-in cases: cooler and/or

freezer - $25

• Vending Machine Controller: refrigerated units - $100

Specialized Controls

(SBP)

The use of occupancy sensors and personal controls in offices, hotel

rooms, and other types of facilities can provide energy savings by

preventing lights and other office equipment from consuming

electricity when not in use.

•“Smart” Power Strips - $25

•Personal Occupancy Sensors - $50

•Vending Machine Controls - $85 for non-refrigerated

•Hotel room HVAC Controls - $100 per room

•Hotel electric receptacle controls - $125 per room

Variable Frequency Drives for

Motors

Prescriptive and Alternative incentives are available for VFDs

VFD Incentives

• 2 HP and larger motors controlled by VFDs in HVAC systems and

process (non-HVAC) functions

• 2 HP – 100 HP VFDs: $1,500 to $7,000

What does this mean to me as a SBP

Customer?

**Savings based on $0.15 per kWh retail price

Project Type Project Cost Incentive Annual kWh

Savings Annual $ Savings **

Lighting $6,958 $5,750 5,624 $843.60

Three 5-HP VFDs $9,600 $4,800 7,899 $1,184.85

TOTAL $16,558 $10,550 13,523 $2,028.45

Continuous Building & Process

Performance Incentives - Overview

Existing Buildings

– HVAC Tune-up

– O&M Training

– Occupant Training

– Full Retro Commissioning

– Continuous Energy Improvement

New Incentives

• HVAC Tune-Ups

• Focus on tune-ups & check-ups on HVAC equipment – 80% of

costs (up to $0.20/annual kWh saved)

• Standard incentives are offered for

• High-Quality HVAC Equipment Tune-Up

• Economizer Testing

• Economizer Repair

• Dual Enthalpy Economizer Upgrade

• Ventilation Air Quantity Optimization

• Demand Controlled Ventilation

• Occupant Training

– Deployment of occupant awareness programs – 50% up to

$5,000

Operations & Maintenance Training

• Incentives for enrollment fees for approved training

• 80% of cost - up to $1,000

• Eligibility is for building operators, managers, and other personnel who

influence energy efficiency decisions and physically work in a facility

located in Pepco or Delmarva Power Maryland service territories

• Training is to improve the operation and maintenance of buildings which

result in electric energy savings

• All applications must be pre-approved prior to taking the course

Pre-Approved Courses

• Examples of pre-approved courses are listed on our website from

many great organizations including

– AEE (Association of Energy Engineers)

– LEED (Leadership in Energy & Environmental Design)

– IFMA (International Facility Management Association)

– NAPE (National Association of Power Engineers)

– NALMCO (National Association of Lighting Management

Companies)

– BOC (Building Operator’s Certification)

– BOMI (Building Owners & Managers International)

33

34

New Construction Overview

• Design Incentives Available

– Eligibility - New Buildings, New Additions and Major Renovations with a Minimum 50,000 sf, or at least 150 tons of AC and 75 kW of lighting

• New Equipment Incentives

– Design-Based Lighting

– Lighting Controls

– Packaged HVAC Units

– Chillers

– Commercial Refrigeration & Kitchens

– Specialized Controls

– Custom Projects

Design Support

Technical design support and incentives are available

• Design Support Agreement between customer, design team and

Program

• Design-phase support from Program staff – Incentives to Design

Team

- Brainstorming - $1000

- Simulation analysis - $5000 plus (based on SF)

- Incorporating into final design – up to $8000

- Enhanced Commissioning – up to $8000

Pepco /DPL

Customer

Trade Ally

or Service

Provider

Application

Received Review

Application

Pre-Inspection (as needed)

Pre-

Approval

Approval

Letter

Received/

Purchases

Started

Project

Completion

Project

Documents

Submitted

Post-Inspection

(as needed)

Final

Approval

Incentive

Payment

The Application Flow

Project

Design

The Application Guidelines and Tips

• Applications are available on the Program website or through the

Program Office.

– Always download the most current version of the application

from the Web site

• Certain measures will require one or all of these:

– Pre-inspections

– Pre-approvals

– Post-inspections

• See the applications and worksheets for full explanation

• Receive payment within 4 weeks after equipment installation and

complete project documentation is received

• We are available to assist you!

38

We are available to assist you!

Pepco

www.pepco.com/business

1-866-353-5798

PepcoEnergyEfficiency@LMBPS.com

Delmarva Power

www.delmarva.com/business

1-866-353-5799

DelmarvaEnergyEfficiency@LMBPS.com