perfis bosch
TRANSCRIPT
HydraulicsElectric Drivesand Controls
Linear Motion andAssembly Technologies Pneumatics Service
1.1
The Drive & Control Company
Basic Mechanic ElementsQuick & Easy
Version
Bosch Rexroth AG Quick & Easy2 3 842 540 386 (2010.07)
Symbols
6 8 10 Width of profile groove; accessories suitable for attaching in profile groove
5010 10
4010 10 Modular profile dimensions; accessories suitable for mounting in modular dimensions
Part number; delivery of one delivery unit with 20 pieces; length of profiles: 6070 mm
Part number; delivery of one profile (LE 1); state desired length; additional indication of profile finishes possible
3-4 Reference to another page
M12 D17 Profile end finishing after usual order with fixed material number
Note on possible standard profile finishes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 33 842 540 386 (2010.07)
Contents
The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.
New profile finishes from Rexroth – Quick & Easy 4
Standard profile finishes 7
Individual profile finishes 10
Strut profiles with 6 mm groove 16
Strut profiles with 8 mm groove 18
Strut profiles with 10 mm groove 21
Bosch Rexroth AG Quick & Easy4
Profile finishing
3 842 540 386 (2010.07)
Rexroth's proven modular profile system can be extended by numerous options for custom profile finishes. This enables even faster and more cost-efficient construction of frames, enclosures, workstations, and customer-specific applications.
Profile finishing is required, for example, in order to use interlocking connectors, mount in the core holes of a profile, or with miter cuts.
Thanks to Rexroth's Quick & Easy, it is now possible to order and supply individually configured profiles and finishes.
The new profile finishes from Rexroth
Thanks to a new production complex – e.g. our new profile finishing center in Stuttgart – we can offer you the following advantages:
– Profile finishing of all Rexroth profiles with extremely short delivery times
– Very attractive finishing prices– Simplified logistics - just one material
number, regardless of finishing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 5
45x90L3 842 993 662
A
F
Z E
B
C
D
3 842 540 386 (2010.07)
Profile finishing
New profile finishes from Rexroth – Quick & Easy
Quick & Easy – four steps for simple ordering
The type of profile finishing is defined in an order key; all finishes for a profile can be summarized in one order key.
1 Select profile cross section and length2 Indicate the groove for finishing:
See profile dimensional drawings for groove designations (A; B; C; ...)
3 Define parameters:– Type of finishing (drilling, milling,
miter cut)– Distance from profile end
4 Send order: Conventionally via fax or preferably online in our e-shop
Principle structure of the order key
eShop and MTpro - software tools for designers, planners, and purchasers
Quick & Easy is supported by Rexroth's eShop and the new MTpro profile configurator.
We offer:
– Customer-friendly configurations– Generation of 3-D CAD models for
designers– Drawings at the press of a button– Integration of frames/profiles in layouts– Easy ordering at the click of a mouse
All profile grooves are identified with letters in ascending order and clockwise:
3 842 993 662 / 580 / B = D17/-Material number Length Standard finish
through hole D17 in groove B
Material number/length/[groove designation = finishing; parameter set]
C
DQ&E
B
A
ProfileGrooveParameterOrder
Bosch Rexroth AG Quick & Easy6
A C
D
B
22,5 22,5255
A
17
17
A C
D
B
A22,5 22,5
255
17
17
A DF
B
E
C
58255
20 9,8
A
D17 D17V
Profile finishing
3 842 540 386 (2010.07)
Fixed material numbersfor defined finishing of selected profiles.
Standard profile finishes are required very frequently for all profiles. This includes e.g. finishing for standard connectors from Rexroth.
The order key for standard finishes only includes information on the groove and finishing (separate for both profile ends). Here, the parameter set is already per-manently stored for an exact description (distances, depths, etc.).
Individual profile finishesoffer the highest flexibility for defining profile finishing. The finishes can be implemented in almost any combination.
An appropriate parameter set is available for each finish for descriptive purposes, see "Individual profile finishes".
Order options for Rexroth profiles
Example: 40x40L
3 842 993 126/255
Example: 40x40L 2N
3 842 993 720/255/ A=D17/-; B=-/D17
Example: 20x60
3 842 993 698/255/ [B=DI; PS=58; OS=20; DM=9.8]
Available standard finishes:
Available individual finishes:
Through hole D
Blind hole bore DB
Thread cutting M
Standard milling F1
Boring DI
Bore sequence DIS
Cross milling MT
Cross milling sequence MTS
Lengthwise milling MI
Lengthwise milling sequence
MIS
Miter cuts S1/S3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 7
p 40 45 50 60HT 31 34 36 41
1722,5
HT
p
18
11
22
a10 10
a = 40/45/50/60
3 842 540 386 (2010.07)
Profile finishing
Standard profile finishes
Standard profile finishes are used in conjunction with Rexroth connection technology and to mount accessories:– Central bolts (corner connections)– Quick connectors– Bolt connectors– Cross connectors– Bases and wheels
They offer decisive advantages:– A guiding material number for all
conceivable finishes for profile cross sections.
– Available for all profiles– Any combination possible.– Blind hole bores possible.All this results in brand new options!
The order key has a simple structure:The parameters for the exact type of finishing of each profile are permanently stored, see the table.Information on the groove designations and available standard profile finishes can be found on the order sheets (16ff).
6 mm groove 8 mm groove 10 mm groove
6 8 10
Through holefor corner connections with central bolts
D5.8
10
5,8
D7.8
15
7,8
D9.8
Through holefor bolt connectors and quick connectors
D8
10
8
D11
18
11
D17
17
22,5
Blind hole borefor longitudinal end connectors and quick connectors in closed profiles
DB8
10
8
18,5
DB11 DB17
Threadsin all core holes for accessories
M6 M6
30
M8
M8
40
M12
M12
55
M16
M16
115
Standard milling for cross connectors
F1
18
20
50
Standard profile finishes
Material number/length/Z = Mx at profile start/Mx at profile end
Order syntax for through holes, blind hole bores, standard milling
Material number/length/groove designation = finishing at profile start/finishing at profile end; ...
Order syntax for threads
a/2
9,8
Bosch Rexroth AG Quick & Easy8
Profile finishing
3 842 540 386 (2010.07)
Example:3 842 993 728/255/B=D17/-; C=D17/-
Profile 40x80L/L = 255 mm/groove B: through hole D17 at profile start/no finishing at profile end;groove C: through hole D17 at profile start/no finishing at profile endFixed: PS = 22.5 mm (7)
Example:3 842 993 729/255/B=-/D17; D=D17/-
Profile 40x80L 4N/L = 255 mm/groove B: no finishing at profile start/through hole D17 at profile end;groove D: through hole D17 at profile start/no finishing at profile endFixed: PS = 22.5 mm (7)
Example:3 842 993 728/255/
B=DB17/-; C=DB17/-
Profile 40x80L/L = 255 mm/groove B: blind hole bore DB17 at profile start/no finishing at profile end;groove C: blind hole bore DB17 at profile start/no finishing at profile endFixed: PS = 22.5 mm, HT = 34 mm (7)
Example:3 842 993 729/255/
B=-/DB17; D=D17/-
Profile 40x80L 4N/L = 255 mm/groove B: no finishing at profile start/blind hole bore DB17 at profile end; groove D: through hole D17 at profile start/no finishing at profile endFixed: PS = 22.5 mm, HT = 34 mm (7)
Example:3 842 993 728/255/Z=M12/-
Profile 40x80L/L = 255 mm/Thread M12 in all core holes at profile start/no finishing at profile endFixed: Thread depth HT = 55 mm (7)
Example:3 842 993 674/255/Z=M12/-
Profile 80x80L/L = 255 mm/Thread M12 in all core holes at profile start/no finishing at profile endFixed: Thread depth HT = 55 mm (7)
Through hole Dx
Application:– D5.8; D7.8; D9.8 for corner
connections with central bolts– D8; D11; D17 for bolt connectors and
quick connectors
Permanently stored:– Distance from profile end (PS)
Blind hole bore DBx
Application:– DB8; DB11; DB17 for quick
connectors in closed profiles and longitudinal end connectors
Advantage:With closed grooves, the profile surface is not interrupted.
Permanently stored:– Distance from profile end (PS)– Depth of blind hole bore (HT)
Thread Mx
Application:– M6; M8; M12; M16 in all core holes of
the profile, e.g. for screwing on bases and wheels
Permanently stored:– Thread depth
00131637
B E
A F
H G
Z
C D
HTL
AM
00131605
A D
F
B
E Z
C
tL
M12 A
00131604
A D
F
B
E
C
PSPS HTL
A
00131603
A D
F
B
E
C
PS HTL
A
00131602
A D
F
B
A
E
C
PS PSL
00131601
A D
F
B
A
E
C
PSL
Order overview for standard profile finishes
00131605
A D
F
B
E Z
C
tL
M12 A
C
DQ&E
B
A
ProfileGrooveParameterOrder
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 93 842 540 386 (2010.07)
Profile finishing
Standard milling F1
Application:– F1 for cross connectors
Permanently stored:– Starting point of milling (PS)– Ending point of milling (PE)– Depth of milling (HT)
Example:3 842 993 728/383/D=F1/-
Profile 40x80L/L = 383 mm/groove D: cross milling at profile start/no finishing at profile endFixed: PS = 20 mm; PE = 50 mm; HT = 18 mm (7)
Example:3 842 993 729/383/A=F1/F1; D=F1/F1
Profile 40x80L 4N/L = 383 mm/groove A: cross milling at profile start/cross milling at profile endgroove D: cross milling at profile start/cross milling at profile endFixed: PS = 20 mm; PE = 50 mm; HT = 18 mm (7)
Example:3 842 993 724/450/
Z=M12/-; B=-/D17
Example:3 842 993 724/450/
A=D17/-; B=-/D17
Example:3 842 993 716/450/
B=D17/D17; C=D17/D17; D=D17/D17
Example:3 842 993 674/513/
Z=M12/-; A=-/D17; B=-/D17
Example:3 842 993 743/423/A=F1/F1
Example:3 842 993 676/390/
A=F1/F1; G=F1/F1
00131638
A D
F
B
E
C
PS
HT
PEL
A
00131639
A D
F
B
A
E
C
PS PS
HT
PE PEL
00131640
A
B
C
D
40x40L
22,5450
AM12 17
00131642
A
B
A
E
H
C
G
D
F
40x120L
22,522,5
450
00131643
80x80L
B
C
E
A F
H
D
G
22,5513
AM12
45x60
A
B
C
D
18 2050
423
00131644
A
90x180
B
C
G
A H
L
D
K
E
J
F
I
18 2050
390
00131645
A
A
B
C
D
40x40L
22,522,5
450
00131641
A
17
17
Further examples
00131643
80x80L
B
C
E
A F
H
D
G
22,5513
AM12
A
B
C
D
40x40L
22,522,5
450
00131641
A
17
17
C
DQ&E
B
A
ProfileGrooveParameterOrder
Bosch Rexroth AG Quick & Easy10
Individual profile finishes
3 842 540 386 (2010.07)
Individual profile finishes
With individual profile finishes, Quick & Easy offers the following advantages:
– Precise finishing at almost every point on the profile
– Highest variety of available finishes– Available for many profiles– Finishes possible in almost any
combination, including sequential finishing
– A wide variety of finishes from one source
The following finishes are possible:
– Through holes– Blind holes– Stepped bores– Cross milling (transverse to the
longitudinal axis)– Lengthwise milling (in the longitudinal
axis)– Miter cuts
Note:Minimum and maximum lengths must be taken into account in the order, depending on the selected finish.
C
DQ&E
B
A
ProfileGrooveParameterOrder
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 113 842 540 386 (2010.07)
Individual profile finishes
Boring
Bore DI – Through holes with diameter (DM) at
any point on the profile (PS, OS). Note the information on OS in the table.
– Blind hole bore through additional information on the bore depth (HT)
– Stepped bores via two bores at the same point on the profile
– Note the required minimum thicknesses (PSmin, PSmax)!
Bore sequence DIS– Regular sequence of the same bores
(SN, SD)– Note the required minimum
thicknesses (SDmin)!
End finishing Abbrev. Parameter
Bore DI PS Center point of bore
PSmin = DM/2 + 3 mm; PSmax = L - (DM/2 + 3 mm)
OS (optional) Offset starting point
Select the OS so that the bore does not cut through any groove edges
DM Bore diameter
See table for DM
HT (optional) Depth of bore. Through bores provided if no information indicated.
See table for HTmax
Bore sequence DIS PS, OS, DM, HT
As with bore DI
SN Number of finishes
SNmax = INT ((L - 3 - PS - DM/2)/SD) + 1
SD Distance between adjacent finishes
SDmin = DM + 3
DM 5.8 6.4 7.8 8.0 8.4 9.8 11.0 17.0
HTmax 40.0 45.0 45.0 45.0 45.0 50.0 60.0 75.0
ATTENTION: If HTmax is not sufficient to drill through the profile, you must order two opposite bores!
Permissible bore diameters, permissible bore depths (in mm)
Parameter
DI Through holes next to groove
3842993661/383/[B=DI; PS=60; OS=22.5; DM=9.8]
Blind holes
3842993661/383/[B=DI; PS=60; DM=9.8; HT=12.2]
Stepped bores
3842993661/383/ [B=DI; PS=60; DM=11,0; HT=12,2]; [B=DI; PS=60; DM=9.8]
DIS Through hole sequence
3842993661/383/ [B=DIS; PS=60; OS=22,5; DM=9.8; SN=4; SD=35]
Order examples for profile 45x90, L = 383 mm
Material number/length/[groove designation=DI; PS=...; OS=...; DM=...; HT=...]; [...] Material number/length/[groove designation=DIS; PS=...; OS=...; DM=...; HT=...; SN=...; SD=...]; [...]
Order syntax
3PS
3
DM
OS(+)OS(-)
3
SD
(DM
+3
)
A D
F
B
E
C
60
22,5
383
9,8A
A D
F
B
E
CA
60 12,2383
9,8
A D
F
B
E
C
6012,2383
9,8
11
A
A D
F
B
E
C
60 35383
9,8
22,5
A
Easy configuration in the eShop
www.boschrexroth.com
A D
F
B
E
C
A D
F
B
E
C
A D
F
B
E
C
A D
F
B
E
C
C
DQ&E
B
A
ProfileGrooveParameterOrder
Bosch Rexroth AG Quick & Easy12
Individual profile finishes
3 842 540 386 (2010.07)
Cross milling
Cross milling MT – Cross milling at any point on the profile
(groove designation, PS) with variable depth (HT) and length (PE – PS); the width corresponds to the profile width.
– Note the required minimum thicknesses (PSmin, PSmax)!
Cross milling sequence MTS– Regular sequence of identical cross
millings (SN, SD)– Note the required minimum distances
(SDmin)!
End finishing Abbrev. Parameter
Cross milling MT PS Starting point of milling (distance between profile cutting area - cross milling front edge)
PSmin = 8 mmPSmin = 60 mm on the bottom of the profile
HT Depth of milling
HTmax = 5.5 mm (6 mm groove)HTmax = 9.0 mm (8 mm groove)HTmax = 12.5 mm (10 mm groove)
PE Ending point of milling (distance between profile cutting area - cross milling rear edge)
PEmax = L - 8 mm8 mm ≤ PE - PS ≤ 100 mm
Cross milling sequence
MTS PS, HT, PE As with cross milling MT
SN Number of finishes
SNmax = INT((L - 8 - PE)/SD)+1
SD Distance between adjacent finishes
SDmin = (PE - PS) + 10
Parameter
Order examples for profile 45x90, L = 383 mm
MT Cross milling on profile side groove D
3842993661/383/[D=MT; PS=50; HT=12.5; PE=90]
MTS Cross milling sequence on profile side groove D
3842993661/383/ [D=MTS; PS=50; HT=12.5; PE=90; SN=4; SD=53]
Material number/length/[groove designation=MT; PS=...; HT=...; PE=...]; [...] Material number/length/[groove designation=MTS; PS=...; HT=...; PE=...; SN=...; SD=...]; [...]
Order syntax
PE
PE
-PS
HT
8)P
S(
100
PE
SD
8)P
S(
10H
T
A D
F
B
E
C
5090
12,5
383
A
A D
F
B
E
C
50 5390
12,5
383
A
Easy configuration in the eShop
www.boschrexroth.com
A D
F
B
E
C
A D
F
B
E
C
C
DQ&E
B
A
ProfileGrooveParameterOrder
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 133 842 540 386 (2010.07)
Individual profile finishes
Lengthwise milling
Lengthwise milling MI– Lengthwise milling at any point on the
profile (groove designation, PS, OS) with variable depth (HT), width (DM) and length (PE – PS). The radius of the milling cutter (RG) determines the corner radius of the milling.
– Note the required minimum distances (PSmin, PSmax, DMmax)!
Lengthwise milling sequence MIS– Regular sequence of identical
lengthwise milling (SN, SD)– Note the required minimum
thicknesses! (SDmin)
End finishing Abbrev. Parameter
Lengthwise milling MI PS Starting point of milling
PSmin = 8 mmPSmin = 60 mm on the bottom of the profile (see order tables for orientation)
OS (optional) Offset starting point
DM Milling width
DMmin = 8 mmDMmax = profile width/height - 6 mmAt least 3 mm of profile must remain on both sides
HT Depth of milling
HTmax = 5.5 mm (6 mm groove)HTmax = 9.0 mm (8 mm groove)HTmax = 12.5 mm (10 mm groove)
PE Ending point of milling
PEmax = L - 8 mm8 mm ≤ PE - PS ≤ 100 mm
RG Radius of milling geometry
RG = 3 mm; 4 mm; 5 mm; 8 mm
Lengthwise milling sequence
MIS PS, OS, DM, HT, PE, RG
As with lengthwise milling MI
SN Number of finishes
SNmax = INT(L - 8 - PE/SD) + 1
SD Distance between adjacent finishes
SDmin = (PE - PS) + 10
Parameter
Order examples for profile 45x90, L = 200 mm
MI Lengthwise milling
3842993661/200/ [B=MI; PS=15; OS=22.5; DM=55; HT=10; PE=80; RG=5]
MIS Lengthwise milling sequence
3842993661/200/ [C=MIS; PS=15; DM=15; HT=10; PE=80; RG=4; SN=2; SD=85]
Material number/length/[groove designation=MI; PS=...; OS=...; DM=...; HT=...; PE=...; RG=R..]; [...] Material number/length/[groove designation=MIS; PS=...; OS=...; DM=...; HT=...; PE=...; RG=R..; SN=...; SD=...]; [...]
Order syntax
RGP
E
PE
PS
(PS
(
OS(-)
OS(+)
DM
DM
HT
RG
8)
38)
SD
RG
PE
10
PS
(
HT
8)
1580
10
200
R5
55
22,5
A
A D
F
B
E
CA
1580
85
10
200
R415
Easy configuration in the eShop
www.boschrexroth.com
A D
F
B
E
C
A D
F
B
E
C
C
DQ&E
B
A
ProfileGrooveParameterOrder
Bosch Rexroth AG Quick & Easy14
Individual profile finishes
3 842 540 386 (2010.07)
Miter cuts
Miter cuts– Cutting of profiles at any angle– Profile sides are numbered clockwise.
S1 is the left side of the profile, in accordance with the position illustrated on the order pages; the following sides are designated S2, S3 and S4.
– Miter cut begins on the designated side. Possible sides: S1 and S3.
– Note the maximum permissible miter angles and minimum lengths, see table on page 15
End finishing Abbrev. Parameter
Miter cuts - FS Front side - designation of the profile end on which the miter cut should be madeS1, S3 - profile side on which the miter cut beginsFS = S1; FS = S3
BS Back side - opposite profile endS1, S3 - profile side on which the miter cut beginsBS = S1; BS = S3
DG Miter angleDG > 0 The angle is always indicated positively; the orientation results from FS/BS and the side on which the miter cut begins. Note the maximum permissible miter angle.
Parameter
Order examples for profile 45x90, L = 383 mm
MT Miter cut on both sides through side S3 (side with groove D)
3842993661/383/[FS=S3; DG=45]; [BS=S3; DG=45]
Miter cut on both sides through side S1 (side with groove A)
3842993661/383/[FS=S1; DG=45]; [BS=S1; DG=45]
Miter cut through side S1 (FS) and S3 (BS)
3842993661/383/[FS=S1; DG=45]; [BS=S3; DG=45]
Material number/length/[FS=side; DG=miter angle]; [BS=side; DG=miter angle]
Order syntax
DG
DG BS
FS
S1
S3L 15
0
A D
F
B
E
CA
383
A D
F
B
E
CA
383
A D
F
B
E
C
383A
Easy configuration in the eShop
www.boschrexroth.com
A D S3S1
S2
S4F
B
E
C
A D S3S1
S2
S4F
B
E
C
A D S3S1
S2
S4F
B
E
C
C
DQ&E
B
A
ProfileGrooveParameterOrder
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 153 842 540 386 (2010.07)
Individual profile finishes
Permissible miter cuts
C
DQ&E
B
A
ProfileGrooveParameterOrder
Profile No. DGmax (°) Lmin1 (mm)1) Lmin2 (mm)2)
20x20 3 842 993 694 45 335 37020x20 1N 3 842 993 690 45 335 37020x20 2N 3 842 993 691 45 335 37020x20 2NVS 3 842 993 692 45 335 37020x20 3N 3 842 993 693 45 335 37020x20 R 3 842 993 695 — — —20x40 3 842 993 696 45 370 44020x60 3 842 993 698 45 404 50820x40x40 3 842 993 697 45 370 44010x40 3 842 993 683 — — —30x30 3 842 993 703 45 352 40430x30 1N 3 842 993 704 45 352 40430x30 2N 3 842 993 705 45 352 40430x30 2NVS 3 842 993 706 45 352 40430x30 3N 3 842 993 707 45 352 40430x30° 3 842 993 708 — — —30x45° 3 842 993 711 — — —30x60° 3 842 993 714 — — —30x30 R 3 842 993 709 — — —30x60 3 842 993 712 45 404 50830x60 4N 3 842 993 713 45 404 50830x60x60 3 842 993 715 45 404 50830x90 3 842 993 762 45 150 15030x120 3 842 993 763 45 150 15030x45 3 842 993 710 45 378 45660x60 8N 3 842 993 669 45 404 50811x20 3 842 993 688 — — —15x120 3 842 993 684 — — —40x40L 3 842 993 724 45 370 44040x40L 0N 3 842 993 760 45 370 44040x40L 1N 3 842 993 719 45 370 44040x40L 2N 3 842 993 720 45 370 44040x40L 2NVS 3 842 993 721 45 370 44040x40L 3N 3 842 993 722 45 370 44040x30° 3 842 993 718 — — —40x45° 3 842 993 726 — — —40x60° 3 842 993 727 — — —40x40L R 3 842 993 725 — — —40x40 HR 3 842 993 723 45 370 44040x80L 3 842 993 728 45 439 57840x80L 4N 3 842 993 729 45 439 57840x80L 3NVS 3 842 993 753 45 439 57840x80x80L 3 842 993 730 45 439 57840x120L 3 842 993 716 45 420 54040x160L 3 842 993 717 45 460 62080x80L 3 842 993 674 45 439 57880x80L 4NVS 3 842 993 758 45 439 57880x80L 6N 3 842 993 675 45 439 57840x120x120L 3 842 993 757 45 420 54080x120L 3 842 993 672 45 420 54080x160L 3 842 993 673 45 460 62045x45L 3 842 993 737 45 378 45645x45L 0N 3 842 993 761 45 378 45645x45L 1N 3 842 993 738 45 378 45645x45L 2N 3 842 993 739 45 378 45645x45L 2NVS 3 842 993 740 45 378 45645x45L 3N 3 842 993 741 45 378 45645x30° 3 842 993 733 — — —45x45° 3 842 993 735 — — —45x60° 3 842 993 744 — — —45x45L R 3 842 993 742 — — —45x45 HR 3 842 993 736 45 378 45645x45 3 842 993 734 45 378 45645x60 3 842 993 743 45 404 50845x90SL 3 842 993 759 45 456 612
Profile No. DGmax (°) Lmin1 (mm)1) Lmin2 (mm)2)
45x90L 3 842 993 662 45 456 61245x90L 2N 3 842 993 751 45 456 61245x90L 3NVS 3 842 993 752 45 456 61245x90 3 842 993 661 45 456 61245x180 3 842 993 731 30 404 50845x270 3 842 993 732 — — —45x90x90L 3 842 993 682 45 456 61290x90SL 3 842 993 681 45 456 61290x90L 3 842 993 680 45 456 61290x90L 4N 3 842 993 755 45 456 61290x90L 4NVS 3 842 993 756 45 456 61290x90 3 842 993 679 45 456 61290x180L 3 842 993 677 30 404 50890x180 3 842 993 676 30 404 50890x360 3 842 993 678 — — —15x22,5 3 842 993 689 — — —15x180 3 842 993 686 — — —22,5x45 3 842 993 700 45 378 45622,5x180 3 842 993 699 — — —50x50L 3 842 993 665 45 387 47450x100L 3 842 993 663 45 474 64850x150L 3 842 993 664 45 450 600100x100L 3 842 993 685 45 474 648100x200L 3 842 993 687 30 416 53260x60L 3 842 993 670 45 404 50860x60 3 842 993 668 45 404 50860x90 3 842 993 671 45 456 612
1) With miter cut on one side with DGmax2) With miter cut on both sides with DGmax
Depending on the size and shape of the profile, as well as the selected miter angle, tolerance deviations up to max. ± 1,2 mm may occur for the L dimension (profile length).
Bosch Rexroth AG Quick & Easy16
00126030
001260270012602600126025
00126029
00126028
00126033
0012603200126031
00126034
5,5
1,5
6 12
R1,5
00110716
5,5
00110717
10
2010
– M6 D5.8 D8/DB8
– 50 50 50 50
M6 50 60 50 50
D5.8 50 50 50 50
D8/DB8
50 50 50 50
Lmax Lmax i
6000 mm 5400 mm
5600 mm 4900 mm
3000 mm 2300 mm
2000 mm 1300 mm
M6
M6
30
DB8D5.8
D8 M6
108
105,8
108
18,5
108
18,5
Strut profiles with 6 mm groove
3 842 540 386 (2010.07)
Central dimension information - groove, modular dimensions, central bore
Dimensions for standard profile finishes
Strut profiles with 6 mm groove for light structures, such as supports and lab fixtures. Profiles 20x40 and 20x60 are especially suitable for reinforcing, profile 20x40x40 is suitable for constructing show cases, shelves and housings.
Custom profiles The material number, length, and any finishes must be indicated in the order. Possible standard profile finishes are indicated in the order table. Some standard profile finishes are limited to specific profile grooves. Individual finishes are always possible and only limited to the values listed on pages 8 to 11.
Minimum profile lengths for profiles with finishing may deviate from the values in the order table, see the table below. In the case of overlapping, the larger value applies.
Note the reduced maximum profile lengths for individual profile finishes! See table below.
Delivery unitsPacking units (LE) with unfinished profiles of a specific length.
Strut profiles with 6 mm groove
(17) (17) (17)(17)
(17) (17) (17)(17)
(17) (17)
Minimum profile lengths (mm) for standard profile finishes on one or both sides
Reduced maximum profile lengths Lmax i for individual profile finishes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 17
20x20 20x20 2NVS20x20 1N 20x20 3N 20x20 R20x20 2N
20x40 20x60 10x4020x40x40
40
20
00131512
A D
F
B
E
C
40
60
20A D
F
B
E
C
0013151340
B D
A F
H
C
G
E
00131514
20
3,3
10
20 33,5
40
ø3,7
A
B
00131515
C
206 6
20
20A C
D
B
00131506
2020A C
D
B
00131507
20
20A C
D
B
00131508
20
20A C
D
B
00131509
20
20A C
D
B
00131510
20
20
R17
3
3
A
B
00131511
16
LE L1) 2) (mm) LE L (mm)20x20 1 3 842 993 694 50 ≤ L ≤ 3000 M6 / D5.8 / D8 / DB8 20 3 842 517 179 300020x20 1N 1 3 842 993 690 50 ≤ L ≤ 3000 M6 / D5.8 / D8 / DB8 20 3 842 536 475 300020x20 2N 1 3 842 993 691 50 ≤ L ≤ 3000 M6 / D5.8 / D8 / DB8 20 3 842 536 478 300020x20 2NVS 1 3 842 993 692 50 ≤ L ≤ 3000 M6 / D5.8 / D8 / DB8 20 3 842 519 658 300020x20 3N 1 3 842 993 693 50 ≤ L ≤ 3000 M6 / D5.8 / D8 / DB8 20 3 842 517 180 300020x20 R 3) 1 3 842 993 695 50 ≤ L ≤ 3000 M6 20 3 842 517 183 300020x40 1 3 842 993 696 50 ≤ L ≤ 3000 M6 / D5.8 / D8 / DB8 24 3 842 537 816 300020x60 1 3 842 993 698 50 ≤ L ≤ 3000 M6 / D5.8 (B,C,E,F)* / D8 (B,C,E,F)* / DB8 16 3 842 537 819 300020x40x40 1 3 842 993 697 50 ≤ L ≤ 3000 M6 / D5.8 / D8 / DB8 16 3 842 537 818 300010x40 3) 1 3 842 993 683 50 ≤ L ≤ 3000 D5.8 / D8 10 3 842 526 817 3000
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
20x20 0.7 0.7 0.7 0.7 1.6 0.420x20 1N 0.7 0.7 0.7 0.7 1.6 0.420x20 2N 0.7 0.7 0.7 0.7 1.6 0.420x20 2NVS 0.7 0.7 0.7 0.7 1.6 0.420x20 3N 0.7 0.7 0.7 0.7 1.6 0.420x20 R 0.6 0.6 0.5 0.5 1.6 0.420x40 4.6 1.2 2.5 1.4 2.9 0.820x60 14.2 1.7 4.7 1.7 3.5 0.920x40x40 6.0 6.0 2.6 2.6 4.1 1.110x40 3.2 0.2 - - 2.1 0.6
3 842 540 386 (2010.07)
Strut profiles with 6 mm groove
Technical data
Custom profiles Delivery units
No. Standard profile finishes No.
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (16). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (16).3) Individual profile finishes not possible.
Cover fold-out page
Bosch Rexroth AG Quick & Easy18
– M8 D7.8 D11/DB11
– 50 50 50 50
M8 50 80 62 66
D7.8 50 62 50 50
D11/DB11
50 66 50 52
Lmax Lmax i
6000 mm 5400 mm
5600 mm 4900 mm
3000 mm 2300 mm
2000 mm 1300 mm
M8
M8
40
D7,8
D11
DB11
M8
1811
22
1811
157,8
00126039
0012603700126036 0012603800126035
001260420012604100126040
00126043 0012604600126045
0012604800126047
00126044
00126049 00126050(21) (21)
0013742300137422
(19) (19) (19)(19)
(19) (19) (19)(19)
(19) (20) (20)(20)
(20) (20) (21)(21)
00110719
8
16,5
R2
9
7,3 2,2
00110720
15
3015
Strut profiles with 8 mm groove
3 842 540 386 (2010.07)
Strut profile with 8 mm groove for medium loads, such as material shuttles, light fixtures, frames and partition walls. Profile 30x60x60 is suitable for constructing show cases and shelves. Attractive covers and hoods can be designed with radius profiles.
Custom profiles The material number, length, and any finishes must be indicated in the order. Possible standard profile finishes are indicated in the order table. Some standard profile finishes are limited to specific profile grooves. Individual finishes are always possible and only limited to the values listed on pages 8 to 11.
Minimum profile lengths for profiles with finishing may deviate from the values in the order table, see the table below. In the case of overlapping, the larger value applies.
Note the reduced maximum profile lengths for individual profile finishes! See table below.
Delivery unitsPacking units (LE) with unfinished profiles of a specific length.
Strut profiles with 8 mm groove
Central dimension information - groove, modular dimensions, central bore
Dimensions for standard profile finishes
Minimum profile lengths (mm) for standard profile finishes on one or both sides
Reduced maximum profile lengths Lmax i for individual profile finishes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 19
308 8
30
30A C
D
B
00131518
30
30
A C
D
B
00131519
30
30A C
D
B
00131520
30
R45R75
A
B
00131521
3030
A C
D
B
00131517
30
30A C
D
B
00131516
30x30 30x30 2NVS30x30 1N 30x30 3N30x30 2N
30
R30
R60
A
B
0013152230
R15
R45
A
B
00131523
R25
30
30
5
5
A
B
00131524
LE L1) 2) (mm) LE L (mm)30x30 1 3 842 993 703 50 ≤ L ≤ 5600 M8/D7.8/D11/DB11 20 3 842 509 178 560030x30 1N 1 3 842 993 704 50 ≤ L ≤ 5600 M8/D7.8/D11/DB11 20 3 842 506 948 560030x30 2N 1 3 842 993 705 50 ≤ L ≤ 5600 M8/D7.8/D11/DB11 20 3 842 506 950 560030x30 2NVS 1 3 842 993 706 50 ≤ L ≤ 5600 M8/D7.8/D11/DB11 20 3 842 506 949 560030x30 3N 1 3 842 993 707 50 ≤ L ≤ 5600 M8/D7.8/D11/DB11 20 3 842 506 951 560030x30° 3) 1 3 842 993 708 50 ≤ L ≤ 5600 M8 20 3 842 524 031 560030x45° 3) 1 3 842 993 711 50 ≤ L ≤ 5600 M8 20 3 842 524 034 560030x60° 3) 1 3 842 993 714 50 ≤ L ≤ 5600 M8 20 3 842 524 037 560030x30 R 3) 1 3 842 993 709 50 ≤ L ≤ 5600 M8/DB11 20 3 842 517 198 5600
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
30x30 2.7 2.7 1.8 1.8 3.1 0.830x30 1N 2.7 2.7 1.8 1.8 3.1 0.830x30 2N 2.7 2.7 1.8 1.8 3.1 0.830x30 2NVS 2.7 2.7 1.8 1.8 3.1 0.830x30 3N 2.7 2.7 1.8 1.8 3.1 0.830x30° 3.5 3.6 2.0 1.9 3.6 1.030x30° 3.6 5.1 2.1 2.3 4.0 1.130x30° 3.0 4.1 1.7 1.9 3.6 1.030x30 R 2.3 2.3 1.4 1.4 2.9 0.8
18
30x30° 30x30° 30x30 R30x30°
3 842 540 386 (2010.07)
Strut profiles with 8 mm groove
Technical data
Custom profiles Delivery units
No. Standard profile finishes No.
1) Note any deviating minimum lengths for the profile finishes, (18). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (18).3) Individual profile finishes not possible.
Cover fold-out page
Bosch Rexroth AG Quick & Easy20
308 8
18
LE L1) 2) (mm) LE L (mm)30x60 1 3 842 993 712 50 ≤ L ≤ 5600 M8 / D7.8 / D11 / DB11 10 3 842 512 603 560030x60 4N 1 3 842 993 713 50 ≤ L ≤ 6000 M8 / D7.8 / D11 / DB11 10 3 842 536 472 607030x60x60 1 3 842 993 715 50 ≤ L ≤ 5600 M8 / D7.8 / D11 / DB11 20 3 842 524 049 560030x90 1 3 842 993 762 50 ≤ L ≤ 6000 M8 / D7.8 (B,C,D,F,G,H)* /
D11 (B,C,D,F,G,H)* / DB1120 3 842 541 937 6070
30x120 1 3 842 993 763 50 ≤ L ≤ 6000 M8 / D7.8 (B,C,D,E,G,H,I,J)* / D11 (B,C,D,E,G,H,I,J)* / DB11
20 3 842 541 939 6070
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
30x60 19.7 5.1 7.0 3.9 5.6 1.530x60 4N 19.7 5.1 7.0 3.9 5.6 1.530x60x60 26.1 26.1 7.5 7.5 8.2 2.230x90 60.6 7.3 13.4 4.9 8.0 2.130x120 136.3 9.6 22.7 6.4 9.9 2.7
30x90
30x120
30
60
A D
E
C
F
B
00131525
30
60
A D
E
C
F
B
00131526
30
60
A F
B D
G
E
H
C
00131527
30x60 30x60 4N
30
9000134861
A E
G
C
H
B
F
D
30
12000134862
A F
I
C
J
B
H
D
G
E
30x60x60
Strut profiles with 8 mm groove
3 842 540 386 (2010.07)
Technical data
Custom profiles Delivery units
No. Standard profile finishes No.
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (18). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (18).
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 21
308 8
LE L1) 2) (mm) LE L (mm)30x45 1 3 842 993 710 50 ≤ L ≤ 5600 M8 / D7.8 (A,C)* / D11 (A,C)* / DB11 /
D9.8 (B)* / D17(B)*18 3 842 511 704 5600
60x60 8N 1 3 842 993 669 50 ≤ L ≤ 6000 M8 / D7.8 / D11 / DB11 20 3 842 535 176 607011x20 3) 1 3 842 993 688 50 ≤ L ≤ 2000 D7.8 / D11 10 3 842 513 581 200015x120 1 3 842 993 684 80 ≤ L ≤ 3000 D7.8 (B,C,D,E,G,H,I)* / D11 (B,C,D,E,G,H,I)* 10 3 842 537 821 3000
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
30x45 8.1 3.9 3.6 2.5 3.9 1.160x60 8N 39.7 39.7 13.2 13.2 9.8 2.611x20 0.5 0.1 0.5 0.2 1.0 0.315x120 110.4 2.2 18.4 2.7 9.0 2.4
30x45
30
10
20,1
45
2,5
6
12,5
R2
A C
D
B
00131528
30 60
60
30
B E
A F
G
D
H
C
00131529
11
10
20A
00131530
A F
H
E
00131531
6 15
C
I
B
G
D
1,5
120
30
15
5
15x120
11x20 60x60 8N
3 842 540 386 (2010.07)
Strut profiles with 8 mm groove
18
Technical data
Custom profiles Delivery units
No. Standard profile finishes No.
Cover fold-out page
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (18). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (18).3) Individual profile finishes not possible.
Bosch Rexroth AG Quick & Easy22
– M12 M16 D9.8 D17/DB17
F1
– 50 55 115 50 50 53
M12 55 110 170 85 89 108
M16 115 170 230 145 149 168
D9.8 50 85 145 60 64 83
D17/DB17
50 89 149 64 68 87
F1 53 108 168 83 87 106
Lmax Lmax i
6000 mm 5400 mm
5600 mm 4900 mm
3000 mm 2300 mm
2000 mm 1300 mm
00126004
00126009
00126014
00126016
00126015 0012601300126012
001260110012609200126010
001260860012600800126007
001260060012600500126003
001260020012600100126000 00125999
00130506
(24) (24,25) (26)(25)
(27) (28) (30)(29)
(31) (31) (33)(32)
(33/34) (34) (35)(35)
(36) (36) (37)(36)
(38)
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
For applications with high loads, we recommend especially stable profiles with 10 mm grooves, e.g. for heavy work tables, fixtures, machine frames, transport shuttles, protective enclosures and handling systems. Thanks to their design characteristics, this groove enables connections with the highest strength.
Custom profiles The material number, length, and any finishes must be indicated in the order. Possible standard profile finishes are indicated in the order table. Some standard profile finishes are limited to specific profile grooves. Individual finishes are always possible and only limited to the values listed on pages 8 to 11.
Minimum profile lengths for profiles with finishing may deviate from the values in the order table, see the table below. In the case of overlapping, the larger value applies.
Note the reduced maximum profile lengths for individual profile finishes! See table below.
Delivery unitsPacking units (LE) with unfinished profiles of a specific length.
Strut profiles with 10 mm groove
Minimum profile lengths (mm) for standard profile finishes on one or both sides
Reduced maximum profile lengths Lmax i for individual profile finishes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 23
4010 10
4510 10
00110723
20
4020
00110724
ø10ø5,5
29
6
12,5
20,1
10
R3
4 5
22,5
22,5
00110729
00110730
ø12,2
ø16
ø10
10 20,1
14,5
6
R3
00110727
ø16
ø10
10 20,1
R3
6
12,5
00110732
25
5025
00110733
ø10ø10
35
6
12,5
10 20,1
R3
5010 10
D9,8
p/29,8
p
M12
M12
55
M16M
16
115
D17
1722,5
F1 18
20 30
DB17
1722,5
HT
D9.8
D17
DB17
M12
M16
F1
p 40 45 50 60HT 31 34 36 41
1722,5
HT
p
18
20
50
a/2
9,8
17
22,5
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Central dimension information - groove, modular dimensions, central boreDimensions for standard profile finishes
Bosch Rexroth AG Quick & Easy24
4010 10
40
40A C
D
B
00131534
40
40A C
D
B
00131532
40
40A C
D
B
00131533
40
40A C
D
B
00131535
40
40A C
D
B
00131536
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
40x40L 9.0 9.0 4.5 4.5 5.6 1.540x40L 0N 9.0 9.0 4.5 4.5 5.6 1.540x40L 1N 9.0 9.0 4.5 4.5 5.6 1.540x40L 2N 9.0 9.0 4.5 4.5 5.6 1.540x40L 2NVS 9.0 9.0 4.5 4.5 5.6 1.540x40L 3N 9.0 9.0 4.5 4.5 5.6 1.540x30° 9.4 11.8 4.7 5.9 6.2 1.740x45° 9.9 16.6 4.9 8.3 6.8 1.840x60° 8.7 13.1 4.3 6.5 6.3 1.7
40x40L 2NVS40x40L 40x40L 0N 40x40L 1N 40x40L 2N
40x40L 3N
40
R 80
R 40
A
B
0013153840
R 60
R 20
A
B
0013153940
R 100R 60
A
B
00131537
40x30° 40x45° 40x60°
40
40
00134857
A C
D
B
LE L1) 2) (mm) LE L (mm)40x40L 1 3 842 993 724 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 / F1 (A)* 20 3 842 529 339 607040x40L 0N 1 3 842 993 760 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 20 3 842 540 954 607040x40L 1N 1 3 842 993 719 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 20 3 842 529 361 607040x40L 2N 1 3 842 993 720 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 20 3 842 529 363 607040x40L 2NVS 1 3 842 993 721 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 20 3 842 529 365 607040x40L 3N 1 3 842 993 722 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 20 3 842 529 367 607040x30° 3) 1 3 842 993 718 50 ≤ L ≤ 6000 M12 12 3 842 529 371 607040x45° 3) 1 3 842 993 726 50 ≤ L ≤ 6000 M12 12 3 842 529 373 607040x60° 3) 1 3 842 993 727 50 ≤ L ≤ 6000 M12 12 3 842 529 375 6070
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).3) Individual profile finishes not possible.
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 25
LE L1) 2) (mm) LE L (mm)40x40L R 3) 1 3 842 993 725 50 ≤ L ≤ 6000 M12/DB17 (A,B)* 20 3 842 529 359 607040x40 HR 1 3 842 993 723 50 ≤ L ≤ 6000 M12/DB17 20 3 842 529 381 607040x80L 1 3 842 993 728 50 ≤ L ≤ 6000 M17/D17/D17/DB17/F1 (A,D)* 12 3 842 529 341 607040x80L 4N 1 3 842 993 729 50 ≤ L ≤ 6000 M17/D17/D17/DB17/F1 (A,D)* 12 3 842 536 484 607040x80L 3NVS 1 3 842 993 753 50 ≤ L ≤ 6000 M12/D9.8/D17/DB17 12 3 842 538 330 607040x80x80L 1 3 842 993 730 50 ≤ L ≤ 6000 M12/D9.8/D17/DB17 8 3 842 537 827 6070
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
40x40L R 7.2 7.2 3.6 3.6 5.0 1.340x40 HR 8.1 7.6 4.0 3.6 5.5 1.540x80L 63.4 17.3 15.9 8.7 9.9 2.740x80L 4N 63.4 17.3 15.9 8.7 9.9 2.740x80L 3NVS 63.4 17.3 15.9 8.7 9.9 2.740x80x80L 96.6 96.6 24.1 24.1 15.4 4.1
R33,3
6,7
6,7
40
40 A
B
00131540
12,5
5
1,5
3
40
19,5
20
A
00131541
4010 10
40x40L R 40x40 HR
40
80
A D
F
B
E
C
00131542
40
80
A D
E
C
F
B
00131543
80
40A F
B D
H
C
G
E
00131545
40
80
A D
E
C
F
B
00131544
40x80L
40x80L 4N 40x80L 3NVS
40x80x80L
22, 23
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).3) Individual profile finishes not possible.
Cover fold-out page
Bosch Rexroth AG Quick & Easy26
4010 10
40
120
A E
G
C
H
B
F
D
00131546
40
160
A F
H
D
I
C
J
B
G
E
00131547
LE L1) 2) (mm) LE L (mm)40x120L 1 3 842 993 716 50 ≤ L ≤ 6000 M12 / D9.8 (B,C,D,F,G,H)* /
D17 (B,C,D,F,G,H)* / DB17 / F1 (A,E)*8 3 842 537 824 6070
40x160L 1 3 842 993 717 80 ≤ L ≤ 6000 M12 / D9.8 (B,C,D,E,G,H,I,J)* / D17 (B,C,D,E,G,H,I,J)* / DB17; F1 (A,F)*
6 3 842 529 345 6070
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
40x120L 203.2 27.8 33.9 13.9 15.5 4.240x160L 466.7 37.2 58.3 18.6 20.5 5.5
40x120L
40x160L
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 27
80
80
A F
B E
G
D
H
C
00131549
40 80
40
08
A F
B E
H
C
G
D
00131551
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
80x80L 132.1 132.1 33.0 33.0 18.2 4.980x80L 4NVS 132.1 132.1 33.0 33.0 18.2 4.980x80L 6N 132.1 132.1 33.0 33.0 18.2 4.940x120x120L 318.0 318.0 42.2 42.2 24.6 6.7
80
80
A F
B E
H
C
G
D
00131550
120
120
40
C E
B F
A I
K
G
J
H
L
D
00131552
4010 10
80x80L 80x80L 4NVS 80x80L 6N
40x120x120L
LE L1) 2) (mm) LE L (mm)80x80L 1 3 842 993 674 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 / F1 6 3 842 529 347 607080x80L 4NVS 1 3 842 993 758 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 6 3 842 538 334 607080x80L 6N 1 3 842 993 675 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 / F1 (A,C,F)* 6 3 842 536 481 6070
40x120x120L 1 3 842 993 757 50 ≤ L ≤ 6000M12 / D9.8 (B,C,J,K)* / D17 / DB17 (A,B,C,D,I,J,K,L)* / F1 (D,I)*
4 3 842 538 287 6070
22, 23
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
Bosch Rexroth AG Quick & Easy28
308 8
120
80
B F
A G
H
E
I
D
J
C
00131553
160
80
00131554
A H
B G
IJ
E
K
D
L
C F
LE L1) 2) (mm) LE L (mm)80x120L 1 3 842 993 672 50 ≤ L ≤ 6000 M12/D9.8 (C,D,E,H,I,J)*/D17 (C,D,E,H,I,J)*/
DB17/F1 (A,F)*4 3 842 537 828 6070
80x160L 1 3 842 993 673 80 ≤ L ≤ 6000 M12/D9.8 (C,D,E,F,I,J,K,L)*/ D17 (C,D,E,F,I,J,K,L)*/DB17/F1 (A,G)*
3 3 842 529 349 6070
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
80x120L 389.3 192.8 64.8 48.2 25.5 6.980x160L 850.8 253.4 106.4 63.4 32.9 8.9
4010 10
80x120L
80x160L
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 29
4510 10
45
45A C
D
B
00131555
LE L1) 2) (mm) LE L (mm)45x45L 1 3 842 993 737 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 / F1 (A)* 20 3 842 511 702 560045x45L 0N 1 3 842 993 761 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 20 3 842 540 955 607045x45L 1N 1 3 842 993 738 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 20 3 842 506 956 560045x45L 2N 1 3 842 993 739 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 20 3 842 506 958 560045x45L 2NVS 1 3 842 993 740 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 20 3 842 506 957 560045x45L 3N 1 3 842 993 741 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 20 3 842 506 959 5600
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
45x45L 11.0 11.0 4.8 4.8 5.7 1.545x45L 0N 11.0 11.0 4.8 4.8 5.7 1.545x45L 1N 11.0 11.0 4.8 4.8 5.7 1.545x45L 2N 11.0 11.0 4.8 4.8 5.7 1.545x45L 2NVS 11.0 11.0 4.8 4.8 5.7 1.545x45L 3N 11.0 11.0 4.8 4.8 5.7 1.5
45x45L
45x45L 2NVS
45x45L 1N45x45L 0N
45x45L 2N 45x45L 3N
45
45
00137398
A C
D
B
45
45
00137397
A C
D
B
45
45
00137396
A C
D
B
45
45
00137395
A C
D
B
45
45
00134858
A C
D
B
22, 23
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
Bosch Rexroth AG Quick & Easy30
45
R67,5
R112,5
A
B
0013156045
R45
R90
A
B
00131561
45
7,5
45
R37,5
7,5
A
B
00131563
45
R22,5
R67,5
A
B
00131562
45
3
2222
,5
11613
1,5
A
00131564
LE L1) 2) (mm) LE L (mm)45x30° 3) 1 3 842 993 733 50 ≤ L ≤ 5600 M12 20 3 842 524 040 560045x45° 3) 1 3 842 993 735 50 ≤ L ≤ 5600 M12 20 3 842 524 043 560045x60° 3) 1 3 842 993 744 50 ≤ L ≤ 5600 M12 20 3 842 524 046 560045x45L R 3) 1 3 842 993 742 50 ≤ L ≤ 5600 M12/DB17 20 3 842 517 200 560045x45 HR 1 3 842 993 736 50 ≤ L ≤ 5600 M12/DB17 20 3 842 525 505 5600
4510 10
45x45° 45x45° 45x45°
45x45L R 45x45 HR
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
45x30° 12.7 15.2 5.0 5.3 6.9 1.845x45° 13.4 21.4 5.2 6.4 7.6 2.045x60° 11.4 17.0 4.4 5.2 6.8 1.845x45L R 8.5 8.5 5.0 5.0 4.9 1.345x45 HR 11.0 10.7 4.4 4,7 6.6 1.8
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Custom profiles Delivery units
No. Standard profile finishes No.
1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).3) Individual profile finishes not possible.
Technical data
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 31
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
45x45 14.0 14.0 6.1 6.1 7.5 2.045x60 37.2 22.7 12.4 10.1 11.0 3.045x90SL 73.4 18.1 16.3 8.0 9.0 2.445x90L 81.9 23.6 18.2 10.5 11.2 3.145x90L 2N 81.9 23.6 18.2 10.5 11.2 3.145x90L 3NVS 81.9 23.6 18.2 10.5 11.2 3.1
45
45A C
D
B
00131565
45
30
60
A C
D
B
0013156645
90
A D
E
C
F
B
00131568
45
90
A D
E
C
F
B
00131569
45
90
A D
E
C
F
B
00131570
45
90
A D
E
C
F
B
00131567
4510 10
45x45 45x60 45x90SL
45x90L 45x90L 2N
45x90L 3NVS
LE L1) 2) (mm) LE L (mm)45x45 1 3 842 993 734 50 ≤ L ≤ 5600 M12 / M16 / D9.8 / D17 / DB17 20 3 842 509 175 560045x60 1 3 842 993 743 50 ≤ L ≤ 5600 M12 / M16 / D9.8 / D17 / DB17 / F1 (A,C)* 20 3 842 509 184 560045x90SL3) 1 3 842 993 759 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 12 3 842 537 102 607045x90L 1 3 842 993 662 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 / F1 (A,D)* 12 3 842 511 782 560045x90L 2N 1 3 842 993 751 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 12 3 842 538 299 607045x90L 3NVS 1 3 842 993 752 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 12 3 842 538 298 6070
22, 23
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Technical data
Custom profiles Delivery units
No. Standard profile finishes No.
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).3) Individual cross milling (MT, MTS) and lengthwise milling (MI, MIS) not possible.
Cover fold-out page
Bosch Rexroth AG Quick & Easy32
45
90
A D
E
C
F
B
00131571
45
180
13
A F
G
E
H
D
I
C
J
B
00131572
45
45 22,5
10
1010
45 45
270
13
21,5
A H
M L K J I
D E F GB
00131573
C
LE L1) 2) (mm) LE L (mm)45x90 1 3 842 993 661 50 ≤ L ≤ 5600 M12/M16/D9.8/D17/DB17/F1 (A,D)* 12 3 842 509 186 560045x180 1 3 842 993 731 80 ≤ L ≤ 5600 M12/M16/D9.8 (B,C,D,E,G,H,I,J)*/
D17 (B,C,D,E,G,H,I,J)*/DB17/F1 (A,F)* 6 3 842 509 187 5600
45x270 1 3 842 993 732 80 ≤ L ≤ 5600 M12/D9.8 (B,C,D,E,F,G,I,J,K,L,M)*/ D17 (B,C,D,E,F,G,I,J,K,L,M)*/DB17; F1 (A,H)*
2 3 842 520 025 5600
4510 10
45x90 45x180
45x270
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
45x90 125.0 32.8 27.7 14.6 15.6 4.245x180 766.7 57.3 85.1 25.4 25.5 6.945x270 3962.0 118.0 300.2 61.5 61.8 16.7
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Technical data
Custom profiles Delivery units
No. Standard profile finishes No.
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 33
90
90
00131577
A F
B E
H
C
G
D
90
90
A F
B E
H
C
G
D
00131578
4510 10
45x90x90L 90x90SL 90x90L
90x90L 4N 90x90L 4NVS
45
90
B D
A F
H
C
G
E
00131574
90
90
A F
B E
G
D
H
C
00131575
90
90
A F
B E
G
D
H
C
00131576
LE L1) 2) (mm) LE L (mm)45x90x90L 1 3 842 993 682 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 (A,B,C,F,G,H)* 8 3 842 537 823 607090x90SL3) 1 3 842 993 681 50 ≤ L ≤ 6000 M12 / D9.8 / D17 / DB17 6 3 842 537 100 607090x90L 1 3 842 993 680 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 6 3 842 509 658 560090x90L 4N 1 3 842 993 755 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 6 3 842 538 297 607090x90L 4NVS 1 3 842 993 756 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 6 3 842 538 296 6070
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
45x90x90L 152.1 152.1 29.1 29.1 21.0 5.790x90SL 129.0 129.0 28.6 28.6 13.9 3.890x90L 210.0 210.0 46.4 46.4 23.6 6.390x90L 4N 210.0 210.0 46.4 46.4 23.6 6.390x90L 4NVS 210.0 210.0 46.4 46.4 23.6 6.3
22, 23
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Technical data
Custom profiles Delivery units
No. Standard profile finishes No.
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).3) Individual cross milling (MT, MTS) and lengthwise milling (MI, MIS) not possible.
Cover fold-out page
Bosch Rexroth AG Quick & Easy34
90
12,5
180
B G
A H
J
E
K
D
L
C
I
F
00131580
90
13
180
15
1011
B G
A H
J
E
K
D
L
C
I
F
00131581
LE L1) 2) (mm) LE L (mm)90x90 1 3 842 993 679 50 ≤ L ≤ 5600 M16/D9.8/D17/DB17/F1 6 3 842 509 189 560090x180L 1 3 842 993 677 80 ≤ L ≤ 5600 M17/D17 (C,D,E,F,I,J,K,L)*/
D17 (C,D,E,F,I,J,K,L)*/DB17/F1 (A,G)*3 3 842 516 015 5600
90x180 1 3 842 993 676 80 ≤ L ≤ 5600 M17/D17 (C,D,E,F,I,J,K,L)*/D17 (C,D,E,F,I,J,K,L)*/DB17/F1 (A,G)*
3 3 842 509 188 5600
4510 10
90x90 90x180L
90x180
00131579
90
90
131510 11
A F
B E
G
D
H
C
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
90x90 299.8 299.8 67.0 67.0 39.5 10.590x180L 1380.0 401.0 153.3 89.1 42.9 11.690x180 2138.3 544.3 237.6 121.0 63.6 17.2
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 35
B G
A H
K
D
L
C
J
E
I
F
00131582
22
360
1113
90
10
15
19,5
22,5
15
13
A
00131583
180
6 15
162
45
5,5
1,5
3,7135
22,5
A F
GHI
DCB E
00131584
LE L1) 2) (mm) LE L (mm)90x360 1 3 842 993 678 80 ≤ L ≤ 6000 M17/D17 (C,D,E,F,I,J,K,L)*/
D17 (C,D,E,F,I,J,K,L)*/DB17/F1 (A,G)*15x22.5 3) 1 3 842 993 689 50 ≤ L ≤ 2000 D9.8/D17 10 3 842 513 576 200015x180 1 3 842 993 686 80 ≤ L ≤ 5600 D9.8 (B,C,D,E,G,H,I)*/D17 (B,C,D,E,G,H,I)* 6 3 842 526 821 5600
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
90x360 14065.0 710.0 781.4 157.7 90.2 24.415x22.5 0.8 0.3 0.7 0.4 1.2 0.315x180 303.5 3.1 - - 11.6 3.1
4510 10
90x360
15x180
15x22.5
22, 23
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).3) Individual profile finishes not possible.
Cover fold-out page
Bosch Rexroth AG Quick & Easy36
19,5
22,5
45
A C
D
B
00131585
8
16,5
22,5
2,2
9
45
180
16A F
GHI
DCB E
00131586
50
50A C
D
B
00131587
50
100
A D
F
B
E
C
00131588
150
50A E
F
D
G
C
H
B
00131589
LE L1) 2) (mm) LE L (mm)22.5x45 1 3 842 993 700 50 ≤ L ≤ 6000 M12/D9.8 (A,C)*/D17/DB17 (A,C)* 24 3 842 537 812 607022.5x180 1 3 842 993 699 80 ≤ L ≤ 5600 D9.8 (B,C,D,E,G,H,I)*/D17 (B,C,D,E,G,H,I)* 6 3 842 509 179 560050x50L 1 3 842 993 665 50 ≤ L ≤ 6000 M12/M16/D9.8/D17/DB17 20 3 842 529 351 607050x100L 1 3 842 993 663 50 ≤ L ≤ 6000 M12/M16/D9.8/D17/DB17/F1 (A,D)* 10 3 842 537 825 607050x150L 1 3 842 993 664 80 ≤ L ≤ 6000 M12/M16/D9.8 (B,C,D,F,G,H)*/
D17 (B,C,D,F,G,H)*/DB17/F1 (A,E)* 4 3 842 537 826 6070
4510 10
5010 10
22.5x45 22.5x180
50x50L 50x100L
50x150L
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
22.5x45 7.1 2.9 3.6 2.6 4.6 1.322.5x180 581.0 11.8 66.8 14.7 21.6 5.850x50L 21.2 21.2 8.5 8.5 9.3 2.550x100L 162.8 42.6 32.6 17.0 17.2 4.650x150L 540.0 64.2 72.0 25.7 25.7 6.9
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG Quick & Easy 37
100
100
00131590
A F
B E
G
D
H
C
100
200
B G
H
J
E
K
D
L
C
I
F
00131591
A
LE L1) 2) (mm) LE L (mm)100x100L 1 3 842 993 685 50 ≤ L ≤ 6000 M12/M16/D9.8/D17/DB17/F1 6 3 842 529 355 6070100x200L 1 3 842 993 687 50 ≤ L ≤ 6000 M12/M16/D9.8 (C,D,E,F,I,J,K,L)*/
D17 (C,D,E,F,I,J,K,L)*/DB17/F1 (A,G)*3 3 842 529 357 6070
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
100x100L 318.3 318.3 63.7 63.7 29.9 8.1100x200L 2133.1 602.1 213.3 120.4 54.0 14.6
5010 10
100x100L
100x200L
22, 23
3 842 540 386 (2010.07)
Strut profiles with 10 mm groove
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
Bosch Rexroth AG Quick & Easy38
4510 10
30
60
13
30
60A C
D
B
00131592
30
60
13
60
30
A C
D
B
00131593
60
30
1322
2215
45
13
90
A D
F
B
E
C
00131594
Ix Iy Wx Wy A m(cm4) (cm4) (cm3) (cm3) (cm2) (kg/m)
60x60L 32.4 32.4 10.8 10.8 9.6 2.660x60 52.0 52.0 17.3 17.3 14.4 3.960x90 212.4 88.5 47.2 29.5 25.3 6.8
6010 10
60x60L 60x60
60x90
LE L1) 2) (mm) LE L (mm)60x60L 1 3 842 993 670 50 ≤ L ≤ 5600 M12 / D9.8 / D17 / DB17 20 3 842 511 872 560060x60 1 3 842 993 668 50 ≤ L ≤ 5600 M12 / M16 / D9.8 / D17 / DB17 20 3 842 509 185 560060x90 1 3 842 993 671 50 ≤ L ≤ 5600 M16 / D9.8 / D17 / DB17 / F1 (A,D)* 10 3 842 509 183 5600
22, 23
Strut profiles with 10 mm groove
3 842 540 386 (2010.07)
Custom profiles Delivery units
No. Standard profile finishes No.
Technical data
* Standard profile finishes possible at the indicated grooves.1) Note any deviating minimum lengths for the profile finishes, (22). In the case of overlapping, the larger value applies.2) Note the reduced maximum profile lengths for individual profile finishes, (22).
Cover fold-out page
Bosch Rexroth AGInfo Fax: +49 711 811-30364
Linear Motion and Assembly Technologies
www.boschrexroth.com/dcl
Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
Please send me/us, without any obligation, more information about:
Ball Screw Drives Linear Motion Systems
Basic Mechanical Elements Manual Production Systems Transfer Systems
Sender
Linear Motion and Assembly Technologies
Bosch Rexroth AG Quick & Easy 3 842 540 386 (2010.07)
3PS
3
DM
OS(+)OS(-)
3
SD
(DM
+3
)P
E
PE
-PS
HT
8)P
S(
100
PE
SD
8)P
S(
10H
T
Bore DI, bore sequence DIS
End finishing Abbrev. Parameter
Bore DI PS Center point of bore
PSmin = DM/2 + 3 mm; PSmax = L - (DM/2 + 3 mm)
OS (optional) Offset starting point
Select the OS so that the bore does not cut through any groove edges
DM Bore diameter
See table for DM
HT (optional) Depth of bore. Through bores provided if no information indicated.
See table for HTmax
Bore sequence DIS PS, OS, DM, HT
As with bore DI
SN Number of finishes
SNmax = INT ((L - 3 - PS - DM/2)/SD) + 1
SD Distance between adjacent finishes
SDmin = DM + 3
DM 5.8 6.4 7.8 8.0 8.4 9.8 11.0 17.0
HTmax 40.0 45.0 45.0 45.0 45.0 50.0 60.0 75.0
ATTENTION: If HTmax is not sufficient to drill through the profile, you must order two opposite bores!
Permissible bore diameters, permissible bore depths (in mm)
Material number/length/[groove designation=DI; PS=...; OS=...; DM=...; HT=...]; [...] Material number/length/[groove designation=DIS; PS=...; OS=...; DM=...; HT=...; SN=...; SD=...]; [...]
Cross milling MT, cross milling sequence MTS
End finishing Abbrev. Parameter
Cross milling MT PS Starting point of milling (distance between profile cutting area - cross milling front edge)
PSmin = 8 mmPSmin = 60 mm on the bottom of the profile
HT Depth of milling
HTmax = 5.5 mm (6 mm groove)HTmax = 9.0 mm (8 mm groove)HTmax = 12.5 mm (10 mm groove)
PE Ending point of milling (distance between profile cutting area - cross milling rear edge)
PEmax = L - 8 mm8 mm ≤ PE - PS ≤ 100 mm
Cross milling sequence MTS PS, HT, PE As with cross milling MT
SN Number of finishes
SNmax = INT((L - 8 - PE)/SD)+1
SD Distance between adjacent finishes
SDmin = (PE - PS) + 10
Material number/length/[groove designation=MT; PS=...; HT=...; PE=...]; [...] Material number/length/[groove designation=MTS; PS=...; HT=...; PE=...; SN=...; SD=...]; [...]
C
DQ&E
B
A
ProfileGrooveParameterOrder
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Bosch Rexroth AG
RG
PE
PE
PS
(PS
(
OS(-)
OS(+)
DM
DM
HT
RG
8)
3
8)
SD
RG
PE
10
PS
(
HT
8)
DG
DG BS
FS
S1
S3
L 150
End finishing Abbrev. Parameter
Lengthwise milling MI PS Starting point of milling
PSmin = 8 mmPSmin = 60 mm on the bottom of the profile (see order tables for orientation)
OS (optional) Offset starting point
DM Milling width
DMmin = 8 mmDMmax = profile width/height - 6 mmAt least 3 mm of profile must remain on both sides
HT Depth of milling
HTmax = 5.5 mm (6 mm groove)HTmax = 9.0 mm (8 mm groove)HTmax = 12.5 mm (10 mm groove)
PE Ending point of milling
PEmax = L - 8 mm8 mm ≤ PE - PS ≤ 100 mm
RG Radius of milling geometry
RG = 3 mm; 4 mm; 5 mm; 8 mm
Lengthwise milling sequence
MIS PS, OS, DM, HT, PE, RG
As with lengthwise milling MI
SN Number of finishes
SNmax = INT(L - 8 - PE/SD) + 1
SD Distance between adjacent finishes
SDmin = (PE - PS) + 10
Material number/length/[groove designation=MI; PS=...; OS=...; DM=...; HT=...; PE=...; RG=R..]; [...] Material number/length/[groove designation=MIS; PS=...; OS=...; DM=...; HT=...; PE=...; RG=R..; SN=...; SD=...]; [...]
Miter cuts
End finishing Abbrev. Parameter
Miter cuts - FS Front side - designation of the profile end on which the miter cut should be madeS1, S3 - profile side on which the miter cut beginsFS = S1; FS = S3
BS Back side - opposite profile endS1, S3 - profile side on which the miter cut beginsBS = S1; BS = S3
DG Miter angleDG > 0 The angle is always indicated positively; the orientation results from FS/BS and the side on which the miter cut begins.Note the maximum permissible miter angle.
Material number/length/[FS=side; DG=miter angle]; [BS=side; DG=miter angle]
Lengthwise milling MI, lengthwise milling sequence MIS
C
DQ&E
B
A
ProfileGrooveParameterOrder
Quick & Easy3 842 540 386 (2010.07)
Bosch Rexroth AG Quick & Easy 3 842 540 386 (2010.07)
– M6 D5.8 D8/DB8
– 50 50 50 50
M6 50 60 50 50
D5.8 50 50 50 50
D8/DB8
50 50 50 50
– M8 D7.8 D11/DB11
– 50 50 50 50
M8 50 80 62 66
D7.8 50 62 50 50
D11/DB11
50 66 50 52
– M12 M16 D9.8 D17/DB17
F1
– 50 55 115 50 50 53
M12 55 110 170 85 89 108
M16 115 170 230 145 149 168
D9.8 50 85 145 60 64 83
D17/DB17
50 89 149 64 68 87
F1 53 108 168 83 87 106
6 8 10
p 40 45 50 60HT 31 34 36 41
1722,5
HT
p
18
11
22
Standard profile finishes
6 mm groove 8 mm groove 10 mm groove
6 8 10
Through holefor corner connections with central bolts
D5.8
10
5,8
D7.8
15
7,8
D9.8
p/2
9,8
p
Through holefor bolt connectors and quick connectors
D8
10
8
D11
18
11
D17
17
22,5
Blind hole borefor longitudinal end connectors and quick connectors in closed profiles
DB8
10
8
18,5
DB11 DB17
Threadsin all core holes for accessories
M6 M6
30
M8 M8
40
M12
M12
55
M16
M16
115
Standard milling for cross connectors
F1
18
20
50
Standard profile finishes
Material number/length/Z = Mx at profile start/Mx at profile end
Order syntax for through holes, blind hole bores, standard milling
Material number/length/groove designation = finishing at profile start/finishing at profile end; ...
Order syntax for threads
Minimum profile lengths (mm) for standard profile finishes on one or both sides
Note:
In the case of overlapping with the values from the order table, the larger value applies.
Quick & Easy3 842 540 386 (2010.07) Bosch Rexroth AG
Bosch Rexroth AG Linear Motion and Assembly Technologies Postfach 30 02 0770442 Stuttgart, GermanyTel. +49 711 811-30698Fax +49 711 811-30364www.boschrexroth.com/dcl
Subject to technical modifications
© Bosch Rexroth AG 2010 Printed in Germany3 842 540 386 (2010.07) EN • DCL/MKT
Find your local contact person here: www.boschrexroth.com/addresses-dcl