FREQROL-F700

Perform

ance / Function

Perform

ance / Function

FREQROL-E700

FREQROL-A700

Product ClassificationProduct ClassificationProduct ClassificationProduct Classification

FREQROL-S500

More functionCapacity

increasing

CapacityCapacity

Perform

ance / Function

Perform

ance / Function

FREQROL-E700

FREQROL-D700

�Type

Model configurationModel configurationModel configurationModel configurationThe lineup of three phase 200V/400V class goes to 15K.

�Model configuration

FeaturesFeatures

FRFR--D700 series featuresD700 series features

Full of useful functionsFull of useful functions７

LongLong--life design & Easy maintenancelife design & Easy maintenance

(1) (1) Spring clamp terminal (control circuit terminal )Spring clamp terminal (control circuit terminal)

Highly reliable and easy wiring is realized by the incorporation of spring clamp terminals.** :Main circuit terminal is screw terminal.

• Easy wiring• Easy wiring

Wiring is completed only by inserting wires treated with bar terminal (max, diameter 1.5mm) Capable of wiring without a bar terminal.

• High reliability

Spring structure in terminal contact section inside prevents contact fault by vibration.

• Maintenance is unnecessary

Screw retightening is unnecessary.

(example: delivery)

(2) (2) Safety stop functionSafety stop function

The FR-D700 series is compliant to the EU Machinery Directive without the addition of previously required external devices.Operation of an external Emergency Stop device results in a highly reliable immediate shutoff of the D700's output to the motor.This safety stop function conforms to the following standards.

(3) (3) Password functionPassword function

Registering 4-digit password can limit parameter read/write.It is effective for parameter setting protection and securing parameter data .

(1) (1) 150%/1Hz high starting torque by general150%/1Hz high starting torque by general--purpose purpose magnetic flux vector controlmagnetic flux vector control

General-purpose magnetic flux vector control and auto tuning function are available.It ensures operation that requires high starting torque, such as transfer machine It ensures operation that requires high starting torque, such as transfer machine including conveyer, hoist, lift, etc., washing machine, and agitators.

• High torque 150%/1Hz and 200%/3Hz are realized

• Auto tuning Many kinds of motors can be optimally controlled with Mitsubishi original "non-rotation " auto tuning function. (R1 constants tuning)

(1) (1) Quick setup with the setting dialQuick setup with the setting dialMitsubishi inverter has a setting dial of course.

• The scrolling speed of the dial was made to variable for more improved operability.

• The non-slip setting dial is easier to turn.

(2) (2) Setting is easily done from a personal computer using the Setting is easily done from a personal computer usi ng the FR Configurator (option) (available soon)FR Configurator (option) (available soon)Connecting a personal computer and the inverter via RS-485 communication realizes setting with wizard (interactive) function of the FR Configurator (inverter setup software).In addition, a parameter setting can be In addition, a parameter setting can be converted from the FR-S500 series to the FR-D700 series by "convert" function.Displays monitor data in waveform. [Graph]

(3) (3) Enclosure surface operation panel FREnclosure surface operation panel FR --PA07 (option)PA07 (option)Optional enclosure surface operation panel (FR-PA07) can be connected. In addition, an operation panel for the FR-E500 series can be connected.The operation panel of the inverter can not be removed.A parameter unit connection cable (FR-CB20� ) is separately necessary.

(4) (4) Parameter unit FRParameter unit FR --PU07 (option)PU07 (option)An optional parameter unit (FR-PU07) can be connected as well.A parameter unit connection cable (FR-CB20� ) is separately necessary.

• Setting such as direct input method with a numeric keypad, operation status indication, and help function are usable. Eight languages can be displayed.

• Parameter setting values of maximum of three inverters can be stored.• A battery pack type allows parameter setting and parameter copy

without powering on the inverter. (available soon)

(1) (1) Easily replaceable compact bodyEasily replaceable compact bodyInstallation size is the same as that of the FR-S500 series which is the smallest model of the Mitsubishi inverter.

(2) (2) Side by side installation saves spaceSide by side installation saves spaceSpace can be saved by side by side no clearance installation*.*: Use the inverter at the ambient temperature of 40°C or less.

(1) (1) LongLong--life designlife design• The design life of the cooling fan has been extended to 10 years *1 . The life of

the fan can be further extended utilizing the it’s ON/OFF. • The longevity of the capacitors has been extended to 10 years by the

adoption of a capacitor with a specification of 5000 hours and 105°C ambient temperature*1, *2.

*1 : Ambient temperature : annual average 40°C (free from corrosive gas, flammable gas, oil mist, dust and

LongLong--life design & Easy maintenancelife design & Easy maintenance

*1 : Ambient temperature : annual average 40°C (free from corrosive gas, flammable gas, oil mist, dust and dirt) Since the design life is a calculated value, it is not a guaranteed value.

*2 : Output current : 80% of the inverter rated current

• Life indication of life components

*3 : Excerpts from "Periodic check of the transistorized inverter" of JEMA (Japan Electrical Manufacturerís Association)

(2) (2) Most advanced life checkMost advanced life check• Degrees of deterioration of main circuit capacitor, control circuit capacitor, and

inrush current limit circuit can be monitored.• Trouble can be avoided with the self-diagnostic alarm*4 that is output when

the life span is near.

*4 : If any one of main circuit capacitor, control circuit capacitor, inrush current restriction circuit or cooling fan

5 LongLong--life design & Easy maintenancelife design & Easy maintenance

*reaches the output level, an alarm is output. Capacity of the main circuit capacitor can be measured by setting parameter at a stop and turning the power from off to on. Measuring the capacity enables alarm to be output.The cooling fan outputs alarm by using fan speed detection.

(3) (3) Easy replacement of cooling fanEasy replacement of cooling fanA cooling fan is provided on top of the inverter of all capacities requiring a cooling fan (1.5K or more).A cooling fan can be easily replaced without disconnecting main circuit wires.

5 LongLong--life design & Easy maintenancelife design & Easy maintenance

disconnecting main circuit wires.

(4) (4) Combed shaped wiring coverCombed shaped wiring coverSince a cover can be fitted after wiring, wiring work is easily done.

(1) (1) RoHS Directive compliantRoHS Directive compliantHuman and environment-friendly inverter in compliant with RoHS Directive.RoHS Directive requires member nations must guarantee that new electrical and electronic equipment sold in the market after July 1, 2006 do not contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants<G> mark indicating RoHS Directive compliance is printed on the package.

(2) (2) EMC filter integrated model (to be released)EMC filter integrated model (to be released)

EMC filter integrated models will be released.

(3) Filter option (to be released) (3) Filter option (to be released)

6 Global standard environment consciousGlobal standard environment conscious

The inverter with filter pack (a package of power factor improving DC reactor, common mode core and capacitive filter) conforms to the Japanese harmonic suppression guideline.

(4) (4) Complies with UL, cUL,EN (LVD) standardsComplies with UL, cUL,EN (LVD) standards

Useful functions support various kind of applications.

Fan & PumpFan & Pump

Full of useful functionsFull of useful functions7

• Optimum excitation controlThis control enables the motor efficiency to its optimum. More energy

(1) Supporting various applications(1) Supporting various applications

• Regeneration avoidance functionFor a fan rotated faster than the set speed due to the effect of another fan, a trip can be made less likely to occur by automatically increasing frequency at regeneration.

saving is possible in applications with variable load torque characteristic such as fan and pump.

• Power-failure deceleration stop function / Operatio n

• PID control• Automatic restart function after instant power fail ure

continuing function at instant power failure

• Brake resistor connectivity

Material handling machine, Food MachineryMaterial handling machine, Food Machinery

• Multi-step speed operation－－－－ Maximum 15 steps －－－－

• S-curve acceleration & deceleration

• General-purpose magnetic flux control

7 Full of useful functionFull of useful function

－－－－ 0.4K or more －－－－Machinery for other useMachinery for other use

• General-purpose magnetic flux control

• Brake resistor connectivity－－－－ 0.4K or more －－－－

(example: industrial washing machine) (example: car washing machine)

(example: conveyor)(example: meat slicing machine)

• Power failure-time deceleration-to-stop function

The motor can be decelerated to a stop when a power failure or under-voltage occurred to prevent the motor from coasting.For fail-safe of machine tool, etc., it is effective to stop the motor when

Full of useful functionFull of useful function7

Machine toolMachine tool

• General-purpose magnetic flux control

For fail-safe of machine tool, etc., it is effective to stop the motor when a power failure has occurred.

Printing machinePrinting machine

Fabric machineFabric machine

Wrapping machineWrapping machine

Amusement machineAmusement machine

7 Full of useful functionFull of useful function

(2) (2) Enhanced communication functionEnhanced communication function• Modbus and Mitsubishi inverter protocol

Supports Modbus RTUCommunication speed of RS-485 has been improved (communication at 38.4kbps is available)"Multi command mode" has been added to Mitsubishi inverter

A brake transistor is built-in to the 0.4K or more.Connecting an optional brake resistor increases regeneration capability.It is useful for deceleration time reduction of a machine with a large inertia, such as fan, and operation of lift, etc.

(3) (3) Brake resistor can be connectedBrake resistor can be connected

protocol (data processing time of the inverter has been reduced to 1/4)