performance test cell capabilites - pumpgroup … · performance test cell capabilites ... t...
TRANSCRIPT
Pump Supply & Repair C P House, 3 The FurrowsMerlin Park, Trafford Park Manchester, England, M32 0SZ
Performance Test CellCapabilites
Statement of Confidentiality
This document and supporting materials contain confidential and proprietary business information of Pump Supply & Repair Group Ltd. These materials may be printed or photocopied for use in evaluating the information internally, but are not to be shared with other parties.
Prepared by: Dale PB
e: [email protected] w: www.PumpGroup.co.ukt: +44 (0) 161 864 4678f: +44 (0) 161 865 0295
2 Pump Supply & Repair | Case Study
0161 864 4678 | www.pumpgroup.co.uk | [email protected]
All Types Of Pumps Tested
Suction & Discharge Diameters - Up To 30”
Pressures Up To 250 Bar
Flow Rates from 0.01m3/hr to 1300m3/hr
Power - 315kVa Supply to Inverters
Generators Can be Used For Higher Powers or Voltages
Range of Inverter Drives up to 300kW
50Hz & 60Hz Testing
Slave Motors up to 250kW
30m3 Above Ground Tank
Pressurised Vessel
45m3 Below Ground Tank (6m deep)
Up to 10m Borehole/Submersible Pumps Tested
30 Tonne Overhead Cranes
Height Under Hook - 7m
Performance Test Cell Capabilites
Automated Test System
Digital & Thermodynamic Pump Testing Employed
ISO9906:2012 Testing Available
Vacuum Pump Testing Using Flowmeters/Orifice Plate Method
Test Mediums Include: Water/High Temperature Water & Oil
Condition Monitoring & FFT Vibration Analysis & Phase Analysis
Motors Dynanometer Load Tested up to 250kW
Customer Witness Testing Welcomed
Test Facility Used By Pump Manufacturers
R&D Projects Undertaken
Self Priming & Suction Lift Testing
NPSH Testing
On Site Testing Offered
3
0161 864 4678 | www.pumpgroup.co.uk | [email protected]
Pump Supply & Repair | Case Study
Parameters Automatically RecordedFlow Rate
Suction Pressure
Discharge Pressure
Suction Temperature (measured to 1/1000 ºC)
Discharge Temperature (measured to 1/1000 ºC)
Electrical Current, Voltage, Power (Across Each Phase)
Hydraulic Efficiency
Shaft Speed
Bearing Temperatures & Vibration Levels
Ambient Temperature, Atmospheric Pressure, Relative Humidity
Sound Level (dBA)
Other Rotating Equipment Tested:Gearboxes
Fans
Blowers
Ash Crushers
Fluid Couplings / Variable Speed Drives
AC & DC Motors
Valves & Pressure Relief Valves
Engineering FacilitiesFull Machine Workshop - Centre Lathes, Borers & Millers
30 Tonne Cranes - 7.0m Height Under Hook
Coded Welders - MIG, TIG, MMA & Cold Welding Equipment
Fabrication Facility
FARO Gage CMM System
Positive Material Identification (PMI) Machine
Belzona Approved Coating Centre
Door Size - 6m high x 5m wide
State Of The Art Equipment Used:Pruftechnik VibXpert II - Dual Channel Data Aquisition System
Pruftechnik Optalign Smart RS - LASER Alignment System
FLIR Thermal Imaging Cameras
On-Test Seal Environmental ControlsCold Flush
Pressurised Thermosyphon Seal Pot System
1-100 Bar Diesel / Oil Pressurised Barrier Fluid
Thermodynamic & Conventional Pump Testing
+44 (0)161 864 4678 | www.pumpgroup.co.uk | [email protected]