Periscope + GoPro Instructions

RequirementsiPhone 5S, 6, 6+, 6S, 6S+ with iOS 8.2 or aboveGoPro Hero 4 Silver or Black

Setup1. Install the GoPro app from the App Store onto your iPhone

2. Follow the on-screen instructions to pair your GoPro with your iPhone

3. After pairing, Go to Settings App > Wifi > Select your GoPro

4. Make sure your GoPro is in Video mode, then Open Periscope and tap the Broadcast tab to begin your broadcast. Notice the Go-Pro camera toggle.

Notes on broadcasting on Periscope with GoPro

iPhone 5, 5c devices are supported for broadcasting, but will not save the broadcast to your camera roll. iPhone 5S and up are fully supported devices.The Hero 4 session is not supported at this time.Do not leave the Periscope app while broadcasting. Leaving Periscope will end the broadcast. You can switch between broadcasting your GoPro camera and the front facing camera on your iPhone by double tapping the screen.

Swipe Right during a broadcast to select which Camera source you’d like to broadcast from (GoPro, front-facing iPhone, or back iPhone). You can also double tap on the screen to toggle between the iPhone and GoPro cameras.You can lock the screen by tapping lock screen. Unlock by swiping across the top. This is useful if you need to place your iPhone in your pocket and to prevent accidental taps.