With a simple touchGreat savingsand more safety

Safety through power

Permanent electro magnetic heavy duty lifting systems

2019/07 Edition

2

MAG DEMAG

Quadsystem technology. Power and safety to square.

Quadsystem permanent-electro circuit: the power of an electromagnet joined to the independance of the permanent magnet.The technology of the double magnet uses electrical power only for few seconds in activation “MAG” and deactivation “DEMAG” cycles.

Tecnomagnete designed and patented this unique and totally innovative technology, where the clamping surface is composed by square poles in chess-board disposition, able to generate great power exactly and only where it is needed: into the load.The patented ”neutral crown” guarantees a perfect insulation of the permanent magnets, avoiding any power losses and interferences with other metallic objects nearby.

Magnetism is the smartest way of handling ferrous loads.Tecnomagnete has continuously researched and developed permanent-electro magnets for 30 years, the only technology that combines safety, strength, convenience and power savings.

TECNO-LIFT systems can handle loads with extreme easiness in the minimum area.They are efficient because they always operate from the top without compressing or deforming the load.The floor space is optimized as no empty areas are required around or in between the loads to get access for their pick up.

No other solution can grant the same level of performances and practical use.

TECNO-LIFT is the ideal solution for steel structural works, distribution and storage, service centers, metalworkings, shipbuildings, surface treatment and for all modern industries interested in increasing the efficiency of production process.

Permanent safety

A permanent electro system is intrinsically safe being not affected by any electrical power failure. No battery back up system is required.The high energy coming from the permanent magnets keeps the load safely clamped with constant force for indefinite period of time and it can be released only on the ground.The maximum safety level for the operator and for the machinery is always granted!

Easy to use andconvenient

One single operator with a remote control can perform all picking-up, lifting, handling and releasing operations always staying at safe distance from the load.No other manpower is required near the load. No other safety tools, belts, chains need to be managed and maintained.

Reliable - User friendly - Easy to install - Cost effective

The most intelligent way to move ferrous loads

3

Reliable - User friendly - Easy to install - Cost effective

TailoredSolutions

TECNO-LIFT systems are designed and built to be compact, light weight, powerful and reliable. The vast array of standard models provides various characteristics of polar geometry and magnetic strength to achieve the correct performance with relation to the load type to be handled (plates, blocks, slabs, profiles, coils, etc…)

All standard TECNO-LIFT systems grant a safety factor of 1:3 between the weight of the load at its operative air-gap and the relevant magnetic force of the lifter.

TECNO-LIFT permanent electro technology is a great leap ahead compared to the traditional electro magnetic lifters:

In performance:

TECNO-LIFT is a cold system due to the absence of heat generation inside the magnets. The clamping force remains constant unlike the traditional electromagnets that are affected by the overheating of the coils in constant use.

In energy saving: TECNO-LIFT needs electrical supply only for few seconds, during the MAG and DEMAG phases. The electrical consumption is 95% less compared to a traditional electromagnet.

In operational costs: The robust solid block construction of TECNO-LIFT magnetic modules with no moving parts inside, no stress and no overheat in the magnet coils can grant a long reliability without specific maintenance. The expensive back up maintenance is also avoided.

In the production process: TECNO-LIFT doesn’t leave residual magnetism in the load. All problems caused normally by the residual magnetism on welding or precision machining operations are eliminated.

CertifiedQuality

The TECNO-LIFT systems respect the international norms UNI EN 13155:2009 .

Manufacturing quality control is certified ISO 9001:2015.

Flux concentration for a precise lifting

The Quadsystem technology allows to short circuit the magnetic flux within a very small depth making possible to lift one steel plate only evenwhen limited thickness are involved.

Load stability and compactness

The traditional wooden spacers between loads are nomore necessary. The load condition is more compact, less overall size and, with no deformation it is more stable during the transportation.

Advantages versus the traditional electro-magnetic technology

Constant strength

High energy saving

Electro magnet

Heating effect with electro magnet

TM 4/75 TM 4/100 TM 4/120 TM 4/140 TM 4/180

9.84

4.92

4.92

9.18

19.02

28.87

0.75

20.17

30.01

0.85

1.64

4.08

8.03

0.42

9.84

4.92

4.92

9.18

19.02

28.87

0.75

20.17

30.01

0.85

1.64

4.08

8.03

0.42

4

19.2

15.4

13.2

11.0

8.25

0.016 0.032 0.048 0.064 0.080

4TM 4/75 TM 4/100 TM 4/120 TM 4/140 TM 4/180

9.84

4.92

4.92

9.18

19.02

28.87

0.75

20.17

30.01

0.85

1.64

4.08

8.03

0.42

9.84

4.92

4.92

9.18

19.02

28.87

0.75

20.17

30.01

0.85

1.64

4.08

8.03

0.42

4

19.2

15.4

13.2

11.0

8.25

0.016 0.032 0.048 0.064 0.080

2800 15001500

58001500Corsa/Stroke

1500Corsa/Stroke

8800

~9150

6150

230

1400

80~25

00~

1000

~

B

A C

TM 4 /X series

Telescopicbeams

For single plate handling up to 12 m.Version with 4 cross beamswith 2 modules each

Sheet handling

Plates, especially large ones, are particularly difficult load to handle.

When attempting to move with traditional methods (hooks, chains, cables) the plates have a tendency to flex and deform, making the grip on the load unstable and dangerous.

The TM series beams pick up the load uniformly from above, without deformations or damage to the load.

Specific selection of the thickness is possible even via radiocontrol to pick up single plate.

Modules Selection

It is possible to lift loads of various length, by simply selecting:• for shorter plates: activate

only the center cross beams, excluding the others

• for medium plates: activate all the cross beams with the side modules in the closed position

• for long plates: activate all the cross beams and extend the arms to the maximum opening

• for narrow plates: activate only the left or right side modules

The Telescopic Movement The ability to lengthen or shorten the center distance between cross beams and select the modules to magnetize, make the TM beams extremely flexible to use.

The telescopic movement is actuated by a dedicated hydraulic pump; the movement of the telescopic arms allows the handling of a complete range of big plates.

Load CharacteristicsModel Thickness (mm) Width (mm) Length (mm) Rated capacity (kg)

TM 4 /X min. Max. min. Max. min. Max. Max.TM 4/100 X 5 120 500 2.500 3.000 12.000 10.000TM 4/130 X 5 120 500 3.500 3.000 12.000 13.000TM 4/160 X 5 120 500 3.500 3.000 12.000 16.000TM 4/200 X 5 120 500 3.500 3.000 12.000 20.000

Dimensions (mm) and WeightsModel A C B Weight (kg) TM4 100-130 X 660 370 1400 2.400TM4 160-200 X 330 535 1400 2.600

5

16.40

8.538.53

3.28

4.92

8.53

25.59

32.15

42.00

0.75

4.08

1.64

0.85

8.03

0.42

33.30

43.14

TM 6/100 TM 6/140 TM 6/180 TM 6/200 TM 6/250

5

0.20”

0.24”

0.28”

0.32”

0.40”

53”

56”

59”

61”

69”

27.5

22.0

19.8

15.4

11.0

0.016 0.032 0.048 0.064 0.080

16.40

8.538.53

3.28

4.92

8.53

25.59

32.15

42.00

0.75

4.08

1.64

0.85

8.03

0.42

33.30

43.14

TM 6/100 TM 6/140 TM 6/180 TM 6/200 TM 6/250

5

0.20”

0.24”

0.28”

0.32”

0.40”

53”

56”

59”

61”

69”

27.5

22.0

19.8

15.4

11.0

0.016 0.032 0.048 0.064 0.080

12800

26002600 2600

78001000 1000

9800Corsa / stroke1500 1500Corsa / stroke

230

10150

1400

80

3400

~

1000

~

~

B

A CC

TM 6 /X series For handling single plates up to 16 m.Version with 6 cross beams with 2 magnetic modules each

Whip Chart

The TECNO-LIFT lifting systems are designed with rigid structural characteristics and with a specific magnetomotive force coefficient (MMF) to guarantee handling even with significant values on the whip chart.

Allowed whip chart values: the relationship between the end of the load (“wing”) and the thickness of the same piece.

With the TECNO-LIFT systems it will be always possible to obtain the utmost performance in terms of load capacity and size, as specified in the technical specifics of these tables and performance tags on the lifters.

TM beams are available in TG version (6 or 8 cross beams) to handle sheets with thickness from 4 mm and capacity up to 14.000 kg.

1500

1550

1750

1425

1350

10 mm

5 mm

6 mm

7 mm

8 mm

Load CharacteristicsModel Thickness (mm) Width (mm) Length (mm) Rated capacity (kg)

TM 6 /X min. Max. min. Max. min. Max. Max.TM 6/200 X 5 120 500 3.500 2.800 16.000 20.000TM 6/250 X 5 120 500 3.500 2.800 16.000 25.000TM 6/230 X 5 120 500 3.500 2.800 16.000 30.000

Dimensions (mm) and WeightsModel A C B Weight (kg) TM6 200 X 660 370 1400 3.800TM6 250-300 X 330 535 1400 4.000

BF 2/37 BF 2/60 BF 2/90

6.56

0.42

8.03

9.51

0.75

10.26

2.3

0.85

1.64

4.08

6

9.90

6.60

4.07

0.016 0.032 0.048 0.064 0.080

Sheet handling

BF 2 /XFixed Beam For plates handling with a maximum length of 6 m.2 cross beams with 2 magnetic modules each.

They have the same characteristics as the TM series, but the 2 cross-beams are at fixed distance.This system is used when the plates come in constant sizes and do not require the telescopic device.

GTR - Magnetic Cross-beamsBF /TG version available for loads with ticknesses from 1,5 mm

BF2 /X - Load Characteristics

Model Thickness (mm) Width (mm) Length (mm) Rated capacity (kg)

BF 2 /X min. Max. min. Max. min. Max. Max.BF 2/50 X 5 120 500 2.500 3.000 6.000 5.000

BF 2/65 X 5 120 500 3.500 3.000 6.000 6.500

BF 2/80 X 5 120 500 3.500 3.000 6.000 8.000

TB 2/100 X 8 120 500 3.500 3.000 6.000 10.000

Model Thickness (mm) Width (mm) Length (mm) Rated capacity (kg)

BFS min. min. Max. min. Max. Max.BFS 04/015 5 150 1.000 2.500 6.000 1.500BFS 05/025 5 150 1.000 5.000 12.000 2.500BFS 06/030 5 150 1.000 2.500 12.000 3.000BFS 08/050 5 150 1.000 2.500 16.000 5.000BFS 10/050 5 150 1.000 2.000 20.000 5.000BFS 06/075 8 200 1.500 2.500 12.000 7.500

Model Thickness (mm) Width (mm) Length (mm) Rated capacity (kg)

BF /TG min. Max. min. Max. min. Max. Max.BFTG 06/010 1.5 25 300 2.500 2.000 3.000 1.000BFTG 12/022 1.5 25 300 2.500 1.000 6.000 2.200BFTG 16/030 1.5 25 300 2.500 1.500 12.000 3.000

GTR

BFS

BF is also available in these configurations: - BFS: multiple cross beams for standard strips handling

- BF /TG for loads with ticknesses from 1,5 mm

BF2

BF /TG - Load Characteristics

BFS - Load Characteristics

The magnetic cross-beams come separate without beams in sets of 4 or 6 (respectively GTR 4/X and GTR 6/X) complete with controller and accessories, ready to be installed on existing beams. Magnetically equivalent to TM 4/X and TM 6/X.

7

TB Tilting beams For handling single plates up to 18 m. long in vertical or horizontal position.

The fix beam with the simple and effective tilting system of the magnetic modules is the perfect solution for operations where vertical axis plates need to be placed in a horizontal axis or vice versa (typically from storage to a cutting table, laser, plasma, etc…)

TT Fix beamsfor cutting systemsFor handling single plates and skeletons after the cutting operation is completed.

TT modular systems are tailor made by designing them to the size of the plate and the cut pieces.They allow easy and fast loading & unloading operations on any type of cutting machines (plasma, oxyacetylene, laser, high definition).In particular they free the bench from cut plate and skeleton in a single move to make the machine immediately available.

TT /O Standard model for any sheet surface with a minimum piece sizeof 250x250 mm and a thicknessbetween 4 and 30 mm.

Other versions:

TT/L for laser cutting systemsTT/H for heavy weight pieces

Load Characteristics

Load CharacteristicsModel Min. Cut piece Thickness (mm) Width Max. Length (mm) Surface m2 Rated capacity (kg)

TT /O mm min. Max. mm min. Max. Max. Max.TTO /045 250x250 4 30 1.500 1.000 3.000 4,5 1.100TTO /060 250x250 4 30 2.000 1.000 3.000 6 1.500TTO /090 250x250 4 30 1.500 1.500 6.000 9 2.200TTO /120 250x250 4 30 2.000 1.500 6.000 12 3.000TTO /150 250x250 4 30 2.500 1.500 6.000 15 3.600TTO /170 250x250 4 30 3.000 2.000 9.000 27 4.000

Model Thickness (mm) Width (mm) Length (mm) Rated capacity (kg)

TB min. Max. min. Max. min. Max. Max.TB 4/35 4 50 1200 3.500 2.000 6.000 3.500TB 6/35 4 50 1200 3.500 2.000 12.000 3.500TB 2/60 8 80 1200 3.500 3.300 6.000 6.000TB 4/90 8 80 1200 3.500 3.000 12.000 9.000TB 4/120 8 80 1200 3.500 3.000 12.000 12.000TB 6/180 8 80 1200 3.500 3.300 18.000 18.000

8

Ø 3.15”

Ø C

E

A

17.3

2”

0.31

”3.

7”9”

D

Ø B

Ø 3.15”

Ø C

E

A

17.3

2”

0.31

”3.

7”9”

D

Ø BSML 50 SML 100 SML 150

16.50

11.00

8.25

5.50

0.016 0.032 0.048 0.064 0.080

SML /Xsingle modulesFor handling single plates or semi finished blocks.

SML permanent electro-magnetic modules are the ideal answer for handling blocks with limited air gap.

•Excellentratiobetweenweightofthelifteranditscapacity.

•Multipolecircuittouniformlyspreadtheforceacrosstheworking area.

Block handling

Load Characteristics

778

Model Thickness min. Width (mm) Length (mm) Rated capacity (kg)

SML /X mm min. Max. min. Max. Max.

SML 60 X

5 800 3000 800 3.500

6.0008 800 3000 800 5.000

20 800 3000 800 6.000

SML 90 X

5 1000 3000 1.000 3.500

9.0008 1000 3000 1.000 5.000

20 1000 3000 1.000 6.000

Dimensions (mm) and Weights

Model A C B Weight (kg) SML 60 X 1.120 560 760 Ø 400SML 90 X 1.120 650 800 Ø 450

SMH 50 SMH 100 SMH 150 SMH 200 SMH 250 SMH 300

9

G

H

Ø D

Ø E

L

F

IC

B

A

7.87

”

G

H

Ø D

Ø E

L

F

IC

B

A

7.87

”

33.0030.2527.5024.7522.0019.2516.5013.7511.008.255.502.75

0.032 0.064 0.095 0.126 0.158 0.189

SMHsingle modulesFor handling single thick slabs and forged blocks.

SMH permanent electro-magnetic modules are designed for liftingloads with big operational air gaps.

•4-polecircuitforhighforceconcentration.•Highmagnetstrength.

Dimensions (mm) and Weights

Model A E F L Weight (kg) SMH 50 1.200 405 780 Ø - 750SMH 100 1.500 520 880 Ø - 950 SMH 150 1.800 630 860 860 1.400SMH 200 1.800 710 980 980 2.000 SMH 300 2.200 840 1145 1145 3.100 SMH 400 2.200 970 1325 1325 4.850

SMH /E Load Characteristics

SMH is also available in /E Extended configurations for loads with lengths up to 13m

SMH Load CharacteristicsModel Thickness min. Width (mm) Length (mm) Rated capacity (kg)

SMH mm min. Max. min. Max. Max.SMH 50 30 800 3.500 800 6.000 5.000SMH 100 30 1.000 3.500 1.000 6.000 10.000SMH 150 40 1.000 3.500 1.000 6.000 15.000SMH 200 40 1.000 3.500 1.000 6.000 20.000SMH 300 60 1.000 3.500 1.000 6.000 30.000SMH 400 80 1.500 3.500 1.500 6.000 40.000

Model Thickness min. Width (mm) Length (mm) Rated capacity (kg)

SMH /E mm min. Max. min. Max. Max.SMH 200 E 45 1.000 3.500 1.500 9.000 20.000SMH 250 E 50 2.000 3.500 2.000 10.000 25.000SMH 300 E 60 1.000 3.500 2.000 13.000 30.000SMH 350 E 80 1.000 3.500 2.000 13.000 35.000SMH 400 E 80 1.500 3.500 2.000 13.000 40.000

SMH is available with MFR Magnetic Force Reading system.

10

Coils - Billets and Slabs handling

CVModules for handling cold-rolled coils, vertical eye.

COModules for handling open coils, vertical eye (annealing process).

CV / TModules for handling cut coils, vertical eye (slitting lines).

The TECNO-LIFT line provides a vast array of solutions dedicated for the handling of compact coils of various morphology and dimensions, without weight limitations.

TECNO-LIFT always comes in contact with the material surface gently from the top, without compression or deformations.

TECNO-LIFT avoids all the problems associated with conventional methods of lifting represented by clamps and C-hooks which require constant pressure on the load.

CHModules for handling cold-rolled coils with a horizontal eye.Complete with automaticload-centering system.

11

BR /D

BR /W

BL /D

Coils - Billets and Slabs handling

BRModules for handling slabsTypical application: on harbour cranes, to load/unload ships.

Versions:BR /S single module for slabs with length 1.000 - 8.000 mmBR /D double modules for slabs with length 6.000 - 12.000 mmBR /W "twin" module with mechanical auto-leveling system for loads 6.000 - 12.000 mm length

BLPermanent-electro magnetic modules for handling layers of billets up to 600°C in the core.

Versions:BL /S single module for billets up to 6.000 mm length BL /D double modules for billets up to 12.000 mm length

BAT GRIP2.5 Tons capacity permanent-electro lifters with battery.

Equipped with a remote control, this lifter is capable to be used for a long period independent of the power supply (est 7 days), because the energy is only used for a fraction of a second during the MAG/DEMAG phase.

12

Sections - Rails - Profiles - Rounds - Pipes handling

TUModules for lifting tubes - round and square.

For the lifting of layers of tube without welding and round loads of various types

CSModules for lifting tanks.

For the movement of round loads of oversized dimensions and thin wall thickness. Tailor made solutions for the movement of tanks, containers, in total safety without deformation of the load.

RDModules for lifting rounds.

The modules “V” groove design adapts to the morphology of the load allowing the centering of the module on the load during clamping phase.

RDP version available for polygonal and irregular shape loads

Load CharacteristicsModel Diameter (mm) Length (mm) Rated lift capacity (kg)

RD min. Max. min. Max. Max.RD 20 150 600 900 6.000 2.000RD 35 200 700 1.000 6.000 3.500RD 50 250 800 1.100 6.000 5.000RD 75 250 900 1.300 6.000 7.500RD 100 300 1.000 1.400 6.000 10.000RD 150 300 1.000 2.000 8.000 15.000RD 200 400 1.200 2.500 10.000 20.000

13

Sections - Rails - Profiles - Rounds - Pipes handling

TPFor handling beams and profiles.

Modular systems combining the benefits of safe lifting, compactness and convenience.Their specific and unique pole design permits the rotation of the load on the ground for the inspection or for the storage in the correct position between the racks.

The TECNO-LIFTs can be equipped with accessories for various applications:

• MRS - Fifth wheel to rotate the load according to the application.

•4HV-Supplementary hooksAllow the use of the beam in a traditional manner, with chains and rope, without dismantling the TECNO-LIFT system. Useful when the load is non ferrous or has non-standard geometry.

•SRMManual 90° rotation system for the cross-beams. Useful for profiles and narrow loads.

•DPV-RingtothehookcombinationAllows the use of the beam alternately with single and double crane hoists.Chains and ring housing built-in.

Tailor-made solutions

Load CharacteristicsModel HEA - HEB - IPE - IPN (mm) Length (mm) Rated lift capacity (kg)

TP min. Max. min. Max. Max.TP 2/200 80 600 6.000 12.000 2.000TP 3/200 80 600 1.000 12.000 2.000TP 4/400 80 600 6.000 18.000 4.000TP 5/400 80 600 1.000 18.000 4.000

1

2

3

4

6

7

5

Pick-up cycle is executed first with 75% of the total possible magnetization strength, only once the load is lifted from the ground the second MAG cycle is executed allowing 100% of the total magnetization power (FULL MAG). This provides a definite minimum safety margin to the load that can be handled in complete safety.

4- Safe button: The user is obligated to press 2 buttons at the same time (SAFE and DEMAG) to release the load, this reduces the chances of an accidental load release.

5- Cross Beam Selections*. Allows the magnetization pattern of the modules: only the center ones, all the cross beams, only one side (narrow loads) left or right.

6- The push button remote includes the APC Power adjustment control. This is a 4 level selector that can reduce the magnetic depth to pick up the load from stack.

7- For the TM4 and TM6 systems, the remote control also includes the OPEN and CLOSE buttons for the telescopic portions of the beams.

*only available for specific TECNOLIFT models (see chart)

When it comes to safety and trust, no detail can be overlooked or left to chance: thousands of TECNO-LIFT systems installed all over the world are our main credentials.Every system represents a study in optimizing the function of real time productivity.

All the magnetic modules are made from a solid piece of steel; this creates a greater protection against accidental impacts with higher reliability.Elastic suspension system are used since the application requires it to equally distribute the weight of the load among the different pick up points avoiding dangerousoverloading.

Control Unit

In a compact IP54 cabinet to allow fast activation and deactivation cycles (max 7 sec)

1- Push button panel Is integrated in the body of the lifter and contains the basic functions (ON/OFF, PICK-UP, FULL MAG, DEMAG, SAFE)

2- The electronic UCS current detecting system controls the correct value of the current absorbed to ensure that the modules reached the full magnetic saturation.

3- PICK-UP, FULL MAG* The TECNO-LIFT system uses a double magnetization cycle test the load according to its weight and airgap condition.

Characteristics, Accessories and Equipments

Special attention is dedicated to to the safety: various electromechanical systems check for accuratemagnetism on the load and detect any problems that may occur during the magnetization, clamping of load, moving the load and the accidental demagnetization during the material handling.

TM4 - GTR4 TM6 - GTR6 BF2 TB

DRUM REEL Enables an easy installation of the system on any type of crane.The cable length is 12 metersand it comes with the appropriate mounting plate.

LAMP BLOCKTo display the status of the system: Normal operation / Pick Up phase / Alarms

DAUTANACIs the safety contact that allows the magnetization / demagnetization only when the chains are slack. This contact prevents the accidental demagnetization when the load is suspended.

REMOTE CONTROLEnables the operation of the system (pickup/ full mag/ safe/ open/ close) from outside the working area and away from the load. The new model is ergonomic, with emergency stop button and APC power adjustment knob.Supplied with frequency regulator, two re-chargeable batteries and charger (110V or 220V) for the transmitter.Cross Beam magnetization selector

Standard supply table

Please visit our website to download technical questionnaires.

Standard Optional

TM4 TM6 BF2 GTR4 GTR6 TB TT SML SMH CV CO CH BL BR BAT TP RD TU CS Structure - High strength tubular steel - - - - - - - -

Elastic suspension system for modules - - - - - - - - - -

Integrated control Unit - - - - - - - -

Stand alone controller - - - - - -

Double cycle magnetization PICK-UP/FULL MAG -

Hydraulic telescoping system - - - - - - - - - - - - - - - - -

Remote control RC/* - - - - - - - -

Remote control for crane cabin - - - - - - - -

APC power adjustment - - - - - - - - - - - - -

Safe Button -

DAUTANAC - - - - - - -

UCS current control unit

Lamp Block -

Chains -

Drum Reel -

Installation kit -

SRM - Module rotation device - - - - - - - - - - - - - -

N N N N N NB N N S N

RC

MAG

DEMAG

Here is a strong statement: Tecnomagnete has revolutionized the world of work holding!Do you want a stronger one? The QuadSystem!This permanent electro magnetic system

generates a concentrated and predetermined force that is highly effective to clamp steel parts on machine tools, moulds for injection molding and dies for metal stamping machines, and the handling of ferrous loads. We’ve believed in the force of our QuadSystem patent and many companies have believed in this powerful innovative technology.

The large variety of applications of over 100,000 systems sold world wide gave all our customers a sharp competitive edge with safety and flexibility.Nowadays, with the global network of our subsidiaries and commercial partners we are at your disposal to show you state of the art technical solutions for all applications and increase your success. Tecnomagnete: all the magnetism of the leader.

A world of magnetic solutions

Safety through power

www.tecnomagnete.com

We

rese

rve

the

right

to m

ake

chan

ges

rela

ted

to th

e te

chno

logi

cal p

rogr

ess.

Distributor:

Subsidiaries:France Tecnomagnete S.A.R.L.Germany Tecnomagnete GmbHUSA Tecnomagnete Inc.

TL E

NG

-07-

2019

Headquarters:

TECNOMAGNETE spa 20020 Lainate (MI)Via Nerviano 31Tel. +39 02.937.591Fax +39 02.935.708.57e-mail: info@tecnomagnete.com