peroxide former webinar

30
Hazards and Handling Advanced Peroxide Forming Webinar: Presented by: Ted Dubiel, Quality Manager

Upload: triumvirate-environmental

Post on 25-Jul-2015

857 views

Category:

Business


1 download

TRANSCRIPT

Hazards and HandlingAdvanced Peroxide Forming Webinar:

Presented by:

Ted Dubiel, Quality Manager

Meet Your Moderator:

Sasha Laferte

1.All lines are muted, use the chat panel for tech

issues and Q&A at webinar’s end.

2.Unanswered questions will be answered via

email after the webinar.

3.Webinar recording and slides will be emailed to

you tomorrow morning.

Share With the Audience

About Ted Dubiel • Over 16 years

peroxide former and high haz management experience

• Head of New England Technical Lab Services Division and company reactives program

Does your organization need help with peroxide former management?

Managing Your Program

• Overview

• Regulations

• Program Implementation

• Program Management

Overview• Chemicals may form

explosive peroxides for a variety of reasons becoming shock sensitive

• Can pose a threat to the health and safety

• In most cases not currently managed under a structured program

Overview• Energetic materials do

not age well

• Routine use can expose can accelerate the chemical breakdown

• Changes in the material’s form, color, or state require investigation

The Chemicals

• Ethyl Ether

• Tetrahydrofuran

• Isopropyl Ether

• 1,4 Dioxane

• Sodium Amide

Common Peroxide Formers:

• Five types of stimuli to which an explosive will react:

Electrostatic discharge

Friction

Impact

Heat

Shock

• Safety needs to be increased as energetic materials age

Overview

Regulation/Guidelines• OSHA- General Duty Clause

• NFPA- Peroxide former storage, Fire Department enforcement

• State Department of Environmental Protection - Treatment permits (if necessary)

Regulation/Guidelines• Perform the work off-

hours

• Have a secure location to move to

• Isolate areas that you will pass through with the material

Stabilization of High Hazard Material

• Information is the key:

Commercial products are relatively easy to stabilize because of the availability of information.

MSDS’s usually (but not always) have solubility information on them.

How Do You Avoid All This?

Management of High Hazard Chemicals

• 95% of all remote openings can be avoided.

• They usually result from three things:

Improper storage

No preventative maintenance

Bulk purchasing

Management of High Hazard Chemicals

The Challenge: Develop a standard operating procedure (SOP) that collects the information you want and prevents small bottles from becoming budget shattering events.

High Hazard SOP’s

• Find easy ways to collect information.

• Work with Researchers

• Make tracking/labeling easy

• Give staff a reason why these things must be done (Ex. Fire dept. requires inventory).

• Create management systems that cover the use, maintenance, and purchasing of those materials that could become unstable.

• This will prevent and prohibit activities that create problems.

Management of High Hazard Chemicals

Management of High Hazard Chemicals

• Management systems can include:

Who can purchase such materials

The largest amount that can be purchased

How and where these materials be stored

After what time the chemicals will be disposed

Who will enforce the system and what the penalty will be

Management of Peroxide Forming

Chemicals• Many of the goals of the system can be accomplished with the existing staff.

• Use people at key points in the process of ordering and receiving chemicals.

Purchasing and Receiving - This covers who is using the material and how much.

Chemical Hygiene Plan - This will cover authorized procedures.

Management of High Hazard Chemicals

• Labs should be inspected routinely by lab personnel specifically for peroxide forming chemicals.

• Periodic inspections by EH&S

High Hazard SOP’s• Get them to document

their high hazard materials on an email format or web-based form.

• Create a similar inspection form for high hazard materials that must be submitted on some schedule.

• Look at the forms and give feedback.

High Hazard SOP’s• You can never provide too much

information to the lab. All lab staff know of peroxides in ether. Not

many know what causes this to happen (conditions and use).

• Attempt to get into lab meetings at least monthly with this type of information.

• Let them know the potential safety issues to the individual.

• Large University in Boston Area

Biannual lab evaluations

• Entire campus walk through

Report created

Material evaluated for disposal

• Large Biotech in Boston Area Entered received date upon receipt

into Chemical inventory

Report created showing material at or over 1 year

Annual walk through

Material removed for disposal

QUESTIONS?

Ted Dubiel [email protected] 617-839-4033

Thank You!

1-888-TEI-WOWS www.triumvirate.com