perspective - konstruct-ag · including washer iso 7089 a10,5, a2 nut iso 4032, m10, a2 section...
TRANSCRIPT
PERSPECTIVE
SYSTEM ELECTRA A KS-P01
Cap screw including sealed washer,
KS-P01-05, A4, e= approx. 150mm
Cap extrusion Electra, KS-P01-02,
aluminium, anodized E6/EV1
Cap sealing Electra, KS-P01-04,
EPDM, black, sealed at joints,
first line of defense
Membrane
Keder extrusion Electra, KS-P01-03A,
aluminium, anodized E6/EV1
Seal, joints
butt joint milled
Thermal separation including O-Ring®, KS-A01
Steel upstand (secondary structure),
according constructional and static specification,
by client
Base extrusion Electra, KS-P01-06A,
aluminium, anodized E6/EV1,
sealed at joints, second line of defense
Attachment set KS-P01-07, hammer head bolt,
e.g. Halfen HS 28-15, M10x40, A2-70 or similar,
including washer ISO 7089 A10,5, A2
nut ISO 4032, M10, A2
48
6025 25
110
ca. 80
108
128
SECTION
SYSTEM ELECTRA A KS-P01
SCALE 1:2
CAD files in download area
PERSPECTIVE
SYSTEM ELECTRA A KS-P01
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Rev.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
01
02
-1
00
0
System Electra A
KS-P01
AW MJ 2020-01-08 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM ELECTRA A KS-P01
Cap screw including sealed washer,
KS-P01-05, A4, e= approx. 150mm
Cap extrusion Electra, KS-P01-02,
aluminium, anodized E6/EV1
Cap sealing Electra, KS-P01-04,
EPDM, black, sealed at joints,
first line of defense
Membrane
Keder extrusion Electra, KS-P01-03A,
aluminium, anodized E6/EV1
Seal, joints
Thermal separation including O-Ring®, KS-A01
Steel upstand (secondary structure),
according constructional and static specification,
by client
Base extrusion Electra, KS-P01-06A,
aluminium, anodized E6/EV1
Backup gutter, standard, KS-A100,
PVC coated sheet metal, t=1,2mm, inside white, outside grey,
sealed at joints, second line of defense
Attachment set KS-P01-07, hammer head bolt,
e.g. Halfen HS 28-15, M10x40, A2-70 or similar,
including washer ISO 7089 A10,5, A2
nut ISO 4032, M10, A2
49
.5
6025 25
110
ca
. 8
0
108
12
9.5
SECTION
SYSTEM ELECTRA A KS-P01
SCALE 1:2
CAD files in download area
PERSPEKTIVE
SYSTEM ELECTRA A KS-P01
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
01
02
-1
01
0
System Electra A,
Back-Up Gutter
KS-P01
AW MJ 2020-01-08 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM ELECTRA KS-P01
Cap screw including sealed washer,
KS-P01-05, A4, e= approx. 150mm
Cap extrusion Electra, KS-P01-02,
aluminium, anodized E6/EV1
Cap sealing Electra, KS-P01-04,
EPDM, black, sealed at joints,
first line of defense
Membrane
Keder extrusion Electra, KS-P01-03A,
aluminium, anodized E6/EV1
Seal, joints
Thermal separation including O-Ring®, KS-A01
Steel upstand (secondary structure),
according constructional and static specification,
by client
Base extrusion Electra, KS-P01-01,
aluminium, anodized E6/EV1
Backup gutter, standard, KS-A100,
PVC coated sheet metal, t=1,2mm, inside white, outside grey,
sealed at joints, second line of defense
Attachment set KS-P01-07, hammer head bolt,
e.g. Halfen HS 28-15, M10x40, A2-70 or similar,
including washer ISO 7089 A10,5, A2
nut ISO 4032, M10, A2
49.5
6025 25
110
ca. 80
129.5
108
1010
128
SECTION
SYSTEM ELECTRA KS-P01
SCALE 1:2
CAD files in download area
PERSPEKTIVE
SYSTEM ELECTRA KS-P01
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
01
02
-1
02
0
System Electra,
Back-UP Gutter,
Secondary Structure Steel
KS-P01
AW MJ 2020-01-08 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM ELECTRA KS-P01
Cap screw including sealed washer,
KS-P01-05, A4, e= approx. 150mm
Cap extrusion Electra, KS-P01-02,
aluminium, anodized E6/EV1
Cap sealing Electra, KS-P01-04,
EPDM, black, sealed at joints,
first line of defense
Membrane
Keder extrusion Electra, KS-P01-03A,
aluminium, anodized E6/EV1
Seal, joints
Attachment set KS-P01-07,
wood screw Dual-Drive or similar
including washer ISO 7089 12, A2
Thermal separation including O-Ring®, KS-A01
Wood upstand (secondary structure),
according constructional and static specification,
by client
Base extrusion Electra, KS-P01-01,
aluminium, anodized E6/EV1
Backup gutter, standard, KS-A100,
PVC coated sheet metal, t=1,2mm, inside white, outside grey,
sealed at joints, second line of defense
2k-Epoxysystem, d>0,2mm
by client
49
.5
6070 70
200
ca
. 8
0
108
12
9.5
1010
128
3636
SECTION
SYSTEM ELECTRA KS-P01
SCALE 1:2
CAD files in download area
PERSPEKTIVE
SYSTEM ELECTRA KS-P01
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
01
02
-1
03
0
System Electra,
Back-UP Gutter,
Secondary Structure Wood
KS-P01
AW MJ 2020-01-08 A3
Service of konstruct AG
Cap screw including sealed washer,
KS-P01-05, A4, e= approx. 150mm
Cap extrusion Electra, KS-P01-02,
aluminium, anodized E6/EV1
Cap sealing Electra, KS-P01-04,
EPDM, black, sealed at joints,
first line of defense
Membrane
Keder extrusion Electra, KS-P01-03A,
aluminium, anodized E6/EV1
Thermal separation including O-Ring®, KS-A01
Steel upstand (secondary structure),
according constructional and static specification,
by client
Backup gutter edge, KS-A101,
PVC coated sheet metal, t=1,2mm, inside white, outside grey,
sealed at joints, second line of defense
Drain pipe, PVC
PVC coated PES fabric,
for welding with PVC coated sheet metal
Vapour barrier
Insulation,
by client
PVC coated sheet metal, t=1,2mm, inside grey, outside white,
by client
Vapour barrier,
by client
PERSPECTIVE
SYSTEM ELECTRA A KS-P01, ON STEEL, EDGE WITH DRAIN
Facade,
by client
Base extrusion Electra, KS-P01-06A,
aluminium, anodized E6/EV1
Attachment set KS-P01-07,
hammer head bolt,
e.g. Halfen HS 28-15, M10x40, A2-70 or similar,
including washer ISO 7089 A10,5, A2
nut ISO 4032, M10, A2
SECTION
SYSTEM ELECTRA A KS-P01, ON STEEL, EDGE WITH DRAIN
SCALE 1:2
CAD files in download area
108
1010
129.5
ca. 80
49.5
219
ca. 91
PERSPEKTIVE
SYSTEM ELECTRA A KS-P01, ON STEEL, EDGE WITH DRAIN
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
01
02-110
0
System Electra,
On Steel,
Edge with Drain, Back-up Gutter
KS-P01
AW MJ 2020-01-08 A2
Service of konstruct AG
Cap screw including sealed washer,
KS-P01-05, A4, e= approx. 150mm
Cap extrusion Electra, KS-P01-02,
aluminium, anodized E6/EV1
Cap sealing Electra, KS-P01-04,
EPDM, black, sealed at joints,
first line of defense
Keder extrusion Electra, KS-P01-03A,
aluminium, anodized E6/EV1
Thermal separation including O-Ring®, KS-A01
Steel upstand (secondary structure),
according constructional and static specification,
by client
Base extrusion Electra, KS-P01-06A,
aluminium, anodized E6/EV1,
sealed at joints, second line of defense
PVC coated PES fabric,
for welding with PVC coated sheet metal
PVC coated sheet metal, t=1,2mm, inside grey, outside white,
by client
PERSPECTIVE
SYSTEM ELECTRA A KS-P01, ON STEEL, EDGE WITH DRAIN
Insulation,
by client
Facade,
by client
Drain pipe, PVC
Vapour barrier,
by client
Vapour barrier
Membrane
Attachment set KS-P01-07, hammer head bolt,
e.g. Halfen HS 28-15, M10x40, A2-70 or similar,
including washer ISO 7089 A10,5, A2
nut ISO 4032, M10, A2
SECTION
SYSTEM ELECTRA KS-P01, ON STEEL, EDGE WITH DRAIN
SCALE 1:2
CAD files in download area
108
1010
128
ca. 78.5
49.5
210
ca. 82
PERSPEKTIVE
SYSTEM ELECTRA A KS-P01, ON STEEL, EDGE WITH DRAIN
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
01
02-111
0
System Electra,
On Steel,
Edge with Drain
KS-P01
AW MJ 2020-01-08 A2
Service of konstruct AG
PERSPECTIVE
SYSTEM SOLITAIRE A KS-P02
Keder extrusion Solitaire, KS-P02-21,
aluminium, anodised E6/EV1
Sealing rubber Solitaire, KS-P02-03,
EPDM, black
Base extrusion Solitaire, KS-P02-01A,
aluminium, anodised E6/EV1
Membrane
Safety screw Solitaire, KS-P02-04,
A4
Gutter, sheet steel (secondary structure),
according constructional and static specification,
by client
Attachment plate steel, 35x6x50mm,
emax.=500mm**, drill Ø 12mm,
by client
Blind Solitaire, KS-P02-06,
aluminium, anodised E6/EV1
Attachment set KS-P02-05,
hammer head bolt,
e.g. Halfen HS 28-15, M10x25, A2-70 or similar,
including washer ISO 7089 A10,5, A2
nut ISO 4032, M10, A2
48
6*
36**
6*
90**
36
20** 15
6*
9
0
°
45**
80
SECTION
SYSTEM SOLITAIRE A KS-P02
SCALE 1:1
CAD files in download area
* Thickness of bracket acc. statical requirements
** Structural lower limit
Notes for steel structure:
- welding seam steel structure and steel bracket as HV-seam (no collision with base
extrusion)!
- zinc bumps have to be removed, at all edges and drills of the steel structure in
contact with the clamping system!
- to guarantee a sufficient contact pressure between sealing rubber and gutter, the
vertical gutter plate has to be fabricated even and without any offsets!
PERSPECTIVE
SYSTEM SOLITAIRE A KS-P02
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
02
02-101
0
System Solitaire A
KS-P02
AW MJ 2019-01-08 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM CARVER KS-P03
Keder extrusion Carver , KS-P03,
aluminium, anodised E6/EV1
Gutter, sheet steel (secondary structure),
according constructional and static specification
Membrane
Attachment set KS-P03-02A,
countersunk bolt, ISO 10642, M10, A2-70
including washer ISO 7089 A10,5, A2
and nut ISO 4032, M10, A2
4
7
1
9
SECTION
SYSTEM CARVER KS-P03
SCALE 1:1
CAD files in download area
PERSPECTIVE
SYSTEM CARVER KS-P03
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
03
02-100
0
System Carver
KS-P03
AW MJ 2018-02-16 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM CARVER KS-P03
Keder extrusion Carver , KS-P03,
aluminium, anodised E6/EV1
Gutter, sheet steel (secondary structure),
according constructional and static specification
Attachment set KS-P03-03,
hexagon bolt, DIN 933, M8, A2-70
including washer ISO 7089 A8,4, A2
and nut DIN 934, M8, A2
Attachment plate steel, drill Ø 10 mm
Membrane
4
7
1
9
SECTION
SYSTEM CARVER KS-P03
SCALE 1:1
CAD files in download area
PERSPECTIVE
SYSTEM CARVER KS-P03
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
03
02-101
0
System Carver,
Attachment by Extrusion Slot
KS-P03
AW MJ 2018-02-16 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM RIDER KS-P04
Keder extrusion Rider , KS-P04,
aluminium, anodised E6/EV1
Gutter, sheet steel (secondary structure),
according constructional and static specification
Membrane
Attachment set KS-P04-03A,
countersunk bolt, ISO 10642, M10, A2-70
including washer ISO 7089 A10,5, A2
and nut ISO 4032, M10, A2
6
5
2
6
.5
SECTION
SYSTEM RIDER KS-P04
SCALE 1:1
CAD files
in download area
PERSPECTIVE
SYSTEM RIDER KS-P04
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
04
02-100
0
System Rider
KS-P04
AW MJ 2018-02-16 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM RIDER KS-P04
Keder extrusion Rider , KS-P04,
aluminium, anodised E6/EV1
Gutter, sheet steel (secondary structure),
according constructional and static specification
Attachment set KS-P04-03,
hexagon bolt, DIN 933, M10, A2-70
including washer ISO 7089 A10,4, A2
and nut DIN 934, M10, A2
Attachment plate steel, drill Ø 12 mm
Membrane
6
5
2
6
.5
SECTION
SYSTEM RIDER KS-P04
SCALE 1:1
CAD files
in download area
PERSPECTIVE
SYSTEM RIDER KS-P04
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
04
02-101
0
System Rider,
Attachment by Extrusion Slot
KS-P04
AW MJ 2018-02-16 A3
Service of konstruct AG
PERSPECTIVE
SYSTEM LAMORA KS-P05
SECTION
SYSTEM LAMORA KS-P05
SCALE 1:1
70
114
26
30
61
5
* Thickness of bracket acc. statical requirements
** Structural lower limit
40**
4*
CAD files
in download area
PERSPECTIVE
SYSTEM LAMORA KS-P05
Cap screw including,
KS-P05-11, A4
Base extrusion Lamora, KS-P05-01,
aluminium, anodised E6/EV1
Connector, KS-A12, stainless steel
wire Ø 2,0 mm, A2, DIN EN 10218
Steel upstand (secondary structure),
according constructional
and static specification
Protection kit KS-A08
Keder extrusion Lamora, KS-P05-02,
aluminium, anodised E6/EV1
Membrane
Cap I extrusion Lamora, KS-P05-03,
aluminium, anodised E6/EV1
Cap II extrusion Lamora, KS-P05-04,
aluminium, anodised E6/EV1
Attachment set Lamora, KS-P05-10A,
hammer head bolt,
e.g. Halfen HS 28-15, M10x25, A2-70
or similar,including washer ISO 7089
A10,5, A2 and nut ISO 4032, M10, A2
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-P
05
02-100
0
System Lamora
KS-P05
AW MJ 2018-02-16 A3
Service of konstruct AG
PERSPECTIVE
AIR INLET 50 "SLOTTED" KS-A02A
Counter sunk screw, A4
Clamping plate 2, KS-A02-02,
aluminium, anodized E6/EV1
Adapter, KS-A02-03,
aluminium, anodized E6/EV1
Flex pipe fluoroplastic, (Flexoform FP 50/6)
Clamping plate 1 "slotted", KS-A02-01,
aluminium, anodized E6/EV1
Layer, ETFE-Film, including cut out for KS-A02
PERSPECTIVE
AIR INLET 50 "SLOTTED" KS-A02A
8
32
40
Ø 106
ELEVATION
AIR INLET 50 "SLOTTED" KS-A02A
SCALE 1:2
CAD files in download area
PRELIMINARY NOT FOR FABRICATION
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
02A
05-101
0
Air Inlet 50 "Slotted"
KS-A02A
AW MJ 2020-01-08 A3
PERSPECTIVE
Air duct 100, KS-A02-151 with Adapter plate 100/50, KS-A02-150
Flex pipe, (Flexoform FP 50/6)
Flex pipe adapter, KS-A02-03,
aluminium, anodized E6/EV1
Adapter plate 100/50, KS-A02-150,
aluminium, anodized E6/EV1,
fully adhered with Air duct
Air duct 100, KS-A02-151, 100/2 mm
PERSPECTIVE
Air duct 100, KS-A02-151 with Adapter plate 100/50, KS-A02-150
ELEVATION
Air duct 100, KS-A02-151 with Adapter plate 100/50, KS-A02-150
SCALE 1:2
37
Ø 70
Ø 100
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
02
05-150
0
Air duct 100 with Adapter plate 100/50
KS-A02
AW MJ 2019-07-24 A3
Counter sunk screw, A4
Clamping plate 2, KS-A03-02,
aluminium, anodized E6/EV1
Adapter, KS-A03-03,
aluminium, anodized E6/EV1
Flex pipe, (Flexoform FP 25/4)
PERSPECTIVE
AIR INLET 25 "SLOTTED" KS-A03A
Layer, ETFE-Film, including cut out for KS-A03
Clamping plate 1 "slotted", KS-A03-05,
aluminium, anodized E6/EV1
PERSPECTIVE
AIR INLET 25 "SLOTTED" KS-A03A
8
26
34
Ø 80
CAD files in download area
ELEVATION
AIR INLET 25 "SLOTTED" KS-A03A
SCALE 1:2
PRELIMINARY NOT FOR FABRICATION
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
03A
05-101
0
Air Inlet 25 "Slotted"
KS-A03A
AW MJ 2020-01-08 A3
PERSPECTIVE
Air duct 50, KS-A03-151 with Adapter plate 50/25, KS-A03-150
Flex pipe, (Flexoform FP 25/4)
Flex pipe adapter, KS-A03-03,
aluminium, anodized E6/EV1
Adapter plate 50/25, KS-A03-150,
aluminium, anodized E6/EV1,
fully adhered with Air duct
Air duct 50, KS-A03-151, 50/2 mm
PERSPECTIVE
Air duct 50, KS-A03-151 with Adapter plate 50/25, KS-A03-150
31
Ø 44
ELEVATION
Air duct 50, KS-A03-151 with Adapter plate 50/25, KS-A03-150
SCALE 1:2
Ø 50
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
03
05-150
0
Air duct 50 with Adapter plate 50/25
KS-A03
AW MJ 2019-07-24 A3
Counter sunk screw, A4
Clamping plate 2, KS-A05-02,
aluminium, anodised E6/EV1
Clamping plate 1, KS-A05-01,
aluminium, anodised E6/EV1
PERSPECTIVE
AIR OUTLET KS-A05
Mesh disk, ETFE
Reduction disc, ETFE
(d
i
according target ventilation)
Nozzle, KS-A05-03,
aluminium, anodised E6/EV1
Layer, ETFE-Foil, including cut out for KS-A05
PERSPECTIVE
AIR OUTLET KS-A05
811
19
Ø 64
CAD files in download area
ELEVATION
AIR OUTLET KS-A05
SCALE 1:2
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
05
05-100
0
Air Outlet
KS-A05
AW MJ 2018-10-16 A3
Clamping plate 2, KS-A06-02,
aluminium, anodised E6/EV1
PERSPECTIVE
CLAMPING RING KS-A06
Layer, ETFE-Foil, including cut out for KS-A03
Clamping plate 1, KS-A06-01,
aluminium, anodised E6/EV1
Counter sunk screw, A4
PERSPECTIVE
CLAMPING RING KS-A06
8
Ø 80
CAD files in download area
ELEVATION
CLAMPING RING KS-A06
SCALE 1:2
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
06
05-100
0
Clamping ring
KS-A06
AW MJ 2018-10-16 A3
PERSPECTIVE
CLAMPING RING KS-A06 WITH DISTANCE PLATE
Clamping plate 2, KS-A06-02,
aluminium, anodised E6/EV1
Layer 2, ETFE-Foil, including cut out for KS-A03
Clamping plate 1, KS-A06-01,
aluminium, anodised E6/EV1
Counter sunk screw, A4
Layer 3, ETFE-Foil, including cut out for KS-A03
Distance plate 1, KS-A03-04,
aluminium, anodised E6/EV1
PERSPECTIVE
CLAMPING RING KS-A06 WITH DISTANCE PLATE
ELEVATION
CLAMPING RING KS-A06 WITH DISTANCE PLATE
SCALE 1:2
Ø80
412
4
20
CAD files in download area
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
06
05-101
0
Clamping ring
with distance plate
KS-A06
AW MJ 2018-10-16 A3
Counter sunk screw, A4
Clamping plate 2, KS-A07-02,
aluminium, eloxiert E6/EV1
Clamping plate 1, KS-A07-01,
aluminium, eloxiert E6/EV1
PERSPECTIVE
PRESSURE ADAPTER KS-A07
Layer, ETFE-Foil, including cut out for KS-A07
Adapter, KS-A07-03-A,
aluminium, eloxiert E6/EV1
Pressure pipe, Polyurethan, clear,
di=4,0mm-di=6,0mm. max Da=8,0mm
87
15
Ø 54
CAD files in download area
ELEVATION
PRESSURE ADAPTER KS-A07
SCALE 1:2
PERSPECTIVE
PRESSURE ADAPTER KS-A07
PRELIMINARY NOT FOR FABRICATION
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
07
05-100
0
Pressure adapter
KS-A07
AW MJ 2019-01-14 A3
20
PERSPECTIVE
PERSPECTIVE CLAMPING RING KS-A11
Layer 2 + 3, including cut out for
KS-A11.
Layer clamped together
clamping plate 1, Da = 64 mm,
di = 20 mm
clamping plate 2
4x counter sunk screw, DIN
7991, M6x8, A4,
fastening torque, MDE= 5 Nm
ELEVATION
CLAMPING RING KS-A11
SCALE 1:2
Ø64
8
CAD files in download area
PERSPECTIVE
CLAMPING RING KS-A11
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
11
05-100
0
Clamping ring
KS-A11
AW MJ 2018-10-16 A3
PERSPECTIVE
CLAMPING RING KS-A11 WITH DISTANCE PLATE
Clamping plate 2, KS-A11-02,
aluminium, anodised E6/EV1
Layer 2, ETFE-Foil, including cut out for KS-A11
Clamping plate 1, KS-A11-01,
aluminium, anodised E6/EV1
Counter sunk screw, A4
Layer 3, ETFE-Foil, including cut out for KS-A03
Distance plate 1, KS-A11-03,
aluminium, anodised E6/EV1
ELEVATION
CLAMPING RING KS-A11 WITH DISTANCE PLATE
SCALE 1:2
Ø64
411
4
20
CAD files in download area
PERSPECTIVE
CLAMPING RING KS-A11 WITH DISTANCE PLATE
Project
RevisionbyDateRev.
Drawing Name
Drawn Approved Date DIN
Re
v.
Dw
g. N
o.
Pro
j. N
o.
Am Rossacker 9, 83022 Rosenheim, Germany
www.konstruct-ag.com / [email protected]
Privacy & Copyright
- This drawing and its contents is the intellectual property of the konstruct AG and thus legally protected! Any use, publication, reproduction, revision, or transfer to third parties requires the
written approval of the konstruct AG.
- Drawings in PDF format are valid only dated and proved.
KS
-A
11
05-101
0
Clamping ring
with distance plate
KS-A11
AW MJ 2018-10-16 A3