pet crate end table (small) · parts hardware top panel (a) 1 pc. bottom panel (b) 1 pc. left panel...
TRANSCRIPT
Pet Crate End Table (Small)
Assembly Instructions
Item Number : 600-4XProduct Name : Pet Crate End Table (Small)
600-4X(Small) Page 1 of 4
Parts
Hardware
Top Panel (A)1 Pc.
Bottom Panel (B)1 Pc.
Left Panel (C)1 Pc.
Right Panel (D)1 Pc.
Back Panel (E)1 Pc.
Door (F)1 Pc.
F6 x 5/8"RF10004
Metal PinRF40009
SpringRF40002
WasherRF44054
JCB M6 x 40RF10041
L-BracketRF50003
Allen KeyRF40103
x 18 x 2 x 2 x 2
x 6 x 6x 1
600-4X(Small) Page 2 of 4
D
RF10004
x 4
Step 1.Attach L-Bracket (RF50003) into the pre-drilled holes on the Left Panel (C), Right Panel (D) and Back Panel (E) using 12 screws (RF10004) as per Diag. 1.
Step 2.Attach Left and Right Panel (C&D) into the pre drilled holes on the Top Panel (A)using 4 screws (RF10004). Then attach Back Panel (E) using 2 screws (RF10004)as per Diag.2.
Diagram1.
C
x 6
RF50003
x 12RF10004
E
Diagram2.
A
D
C
E
RF10004
x 2
600-4X(Small) Page 3 of 4
x 2
RF40009x 2
RF40002
x 2RF44054
F
F
CB
F
D
A
Step 3.Attach Bottom panel (B) into the assembled using 6 screws (RF10041) as per Diag. 3.
Step 4.Assemble spring(RF40002) + door pin(RF40009) + washer(RF44054) per diagram. Warning, hold the pin with �nger so it doesn't �ew away from the force of the spring. Gently insert all three part into predrilled holes at the door(see diagram). Slide the top pin into the hole at Top Panel (A). Trap the bottom pin on Bottom Panel (B) and gently slide the pin until it engaged the hole on panel (B).
Diagram3.
Diagram4.
B
D
E
C
A
x 6RF10041
600-4X(Small) Page 4 of 4