pet market ojoo
TRANSCRIPT
-
8/4/2019 Pet Market Ojoo
1/14
THE GLOBAL CHEMICAL INDUSTRY A PRIMER 259
Polyethylene Terephthalate (PET)
Polyethylene terephthalate (PET) is the most common member of the poly-
ester family. It is used in bottle resin, film and fibers. Bottle resin accounts
for about one-quarter of all polyester melt demand globally, with fiber (sta-
ple fiber and filament) applications contributing the bulk of demand (see
Exhibit 294).
([KLELW 3RO\HVWHU0HOW(QG8VH'HPDQG
3(75HVLQ
6WDSOH)LEHU
7H[WLOH)LODPHQW
2WKHU
)LOP
Based on 2002 dema nd of 32.8 million tons.
Source: CMAI and Bernstein estimates.
Polyester bottle resin is one of the fastest growing plastics and is pre-
ferred over glass for its clarity, low cost, shapeability and ease in recycling.
Technology improvements now allow for polyester bottles to be used for
prod ucts that are pasteurized and requ ire hot fill capabilities. Plastic beer
bottles are one of the future potential uses. PET is also the most recycled
plastic and is familiar through its use in soft drink and water bottles. In
many developing areas, access to sanitary drinking water is limited, so
light-weight, easily transported, low-cost bottles for safe drinking water
add to personal mobility, public hygiene and a better living stand ard (see
Exhibit 295).
-
8/4/2019 Pet Market Ojoo
2/14
260 THE GLOBAL CHEMICAL INDUSTRY A PRIMER
([KLELW 3(75HVLQ(QG8VH'HPDQG
)RRG
3KDUPDFHXWLFDO
&RVPHWLFV
%HYHUDJH
2WKHU3(7
Based on 2002 deman d of 8.5 million tons.
Source: CMAI and Bernstein estimates.
3K\VLFDO&KDUDFWHULVWLFVDQG7UDGH
Polyester bottle resin is easily transported as chips, while polyester fiber is
moved as ba les of fiber or on bobbins as a filament. Prod uction of polyester
resin tends to be located in areas of high consumer consumption such as
North America and Western Europ e, because transportation of a solid ma-
terial is costly. PET trad e flows ar e illustrated in Exhibit 296.
([KLELW *OREDO3(7%RWWOH5HVLQ7UDGH)ORZV
1HW([SRUWV
1HW,PSRUWV
7R6RXWK$PHULFD
Based o n 2002 trade flows.
1RWHV The size of the symbol indicates the volum e of net imp orts or exports.
The arrows provide an overview of the general trade flows.
Source: Bernstein analysis.
-
8/4/2019 Pet Market Ojoo
3/14
THE GLOBAL CHEMICAL INDUSTRY A PRIMER 261
3URGXFWLRQ PET or polyethylene terephthalate first became of commercial importance
as a syn thetic fiber, essentially as a rep lacemen t for natu ral silk. It is a con-
densation polymer, produced from the reaction of ethylene glycol (MEG)
and either terephthalic acid (TPA) or its dimethyl ester, dimethyl tereph-
thalate (DMT). Although there are many different polyesters, it is polyeth-
ylene terephthalate that became known as fiber-grade polyester and was
subsequently used for p olyester film and more recently for the m anu facture
of polyester bottle resin.
The polycondensation synthesis of polyesters involves the reaction of
ethylene glycol with an organic diacid. The most common diacids utilized
are either dimethyl terephthalate (DMT) or terephthalic acid (TPA). These
two feedstocks (DMT and TPA) are generally produced via direct reaction
between oxygen and paraxylene. Polyester is produced when either DMT
or TPA is reacted with ethylene glycol to form melt polymer. The melt
polymer is a hot liquid, which can either be processed directly into polyes-
ter staple fiber or filament, or further processed through a solidifier. The
solidifier produces polyester chip, which is then processed into polyesterstaple fiber or polyester filament. To produce PET bottle resin, material
from the solidifier is sent to a solid stater unit and then processed into PET
resin (see Exhibit 297).
([KLELW 3RO\HVWHU3URGXFWLRQ3URFHVV
7HUHSKWKDODWHV
'07RU37$
(WK\OHQH*O\FRO
0HOW
3RO\PHU
3RO\HVWHU6WDSOH)LEHU
3RO\HVWHU
)LODPHQW
6ROLGLILHU
6ROLG
6WDWHU
5HF\FOH
3RO\HVWHU6WDSOH)LEHU
3RO\HVWHU)LODPHQW
&KLS
3(7
5HVLQ%HYHUDJH
)RRG
3KDUPDFHXWLFDO
&RVPHWLFV
2WKHU
Source: Bernstein analysis.
A small portion of polyester used in consumer goods is recycled to
form PET chip, which can then be converted to polyester staple fiber, fila-
men t or bottle resin. Recycling PET is labor-intensive due to th e sorting an d
classifying involved in collecting and separating polyester goods, such as
empty beverage bottles or food containers. Therefore, the recycling of PET
is driven by environmental concerns rather than economic justification,
since recycled polyester is generally more costly than virgin polyester. The
entire PET value chain linking is illustra ted in Exhibit 298.
-
8/4/2019 Pet Market Ojoo
4/14
262 THE GLOBAL CHEMICAL INDUSTRY A PRIMER
([KLELW 3RO\ROHILQV3(79DOXH&KDLQ
&5$&.(51*/RU
1DSKWKD
(WK\OHQH
3URS\OHQH
5(),1(5