zenithinteriors.com

MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONGzenithinteriors.com

Pete

zenithinteriors.com

PetePete is understated and relaxed. It is soft but strong in all the right places.

PETE ARMCHAIR, SOFA & OTTOMANFEATURES Pete consists of a sofa lounge and ottoman. The lounges and ottoman are constructed using hardwood frames and CFC free high density foams.

FINISHESPete armchair, lounge and ottoman can be fully upholstered in approved fabric, vinyl and leather. The legs on the lounge and ottoman are stainless steel finished to a mirror-polish. Castors are available as an option.

CERTIFICATION

DESIGN SCHAMBURG + ALVISSE

zenithinteriors.com

PETE ARMCHAIR, SOFA & OTTOMANDIMENSIONS

650

720

Pete 650 armchair

650

450

720

450

720

450

750

1500

1800

750

750

750

Pete 750 armchair

Pete 1500 lounge

Pete 1800 lounge

Pete 2200 lounge

720

450

720

450

2200

750

Pete 600 ottoman

Pete 750 ottoman

Pete 1500 ottoman

Pete 2200 ottoman

750

750

420

420

420

750

2200

750

1500

600

600

450

zenithinteriors.com

PETE ARMCHAIR, SOFA & OTTOMAN CARE & MAINTENANCEGENERALFurniture should be inspected regularly for scratches; stains & other damage to ensure repairs are minor & manageable. If you have any queries about product care & maintenance please contact Zenith on 1300 013 013Solid timber & timber veneerFor general cleaning, dust furniture regularly with a soft, damp cloth. Dry with a soft, dry cloth. Do not place hot objects, including cups of tea/ coffee, on timber surfaces as this may damage polish coating. Avoid direct exposure to sunlight, as this will damage timber & polishes. Exposed timber & timber veneer is a natural product & will darken with age & exposure to ultra violet light. Timber edges are extremely vulnerable to impact damage, so please use caution when relocating timber products & when placing timber products next to hard surfaces. Cleaners should be instructed to exercise particular care to protect timber edges from impact from cleaning equipment.LAMINATEHigh pressure finishes including High Pressure Laminates, Melamine & matching edge strips. For normal cleaning wipe with a clean cloth & mild detergent/water mix to clean the surface of loose dirt.Monthly maintenance- wipe with a clean cloth using a recommended spray cleaner. Do not use products containing oil, silicon or acid on Laminate or Melamine surfaces. Do not attempt cleaning using an abrasive liquid or harsh cloth that may scratch the surface.CORIAN & OTHER SOLID RESINSoapy water or ammonia based cleansers will remove most dirt & stains from Corian/solid resin products. To remove water marks wipe with a damp cloth & towel dry. To maintain the Corian/solid resin finishes use a non-abrasive polish & apply with a soft cloth. Avoid exposing Corian/solid resins to strong chemicals, if contact occurs, quickly flush the area with water. GLASSGlass edge profiles are very vulnerable to impact; therefore, use caution when positioning glass products. To avoid chips & scratches avoid abutting glass products up against hard surfaces like concrete or other glass products.CHROME PLATE, POWDER-COATED METAL & STAINLESS STEELClean using a damp cloth and mid, cleaning product. Dry with a soft cloth. Do not use any abrasive cleaning agents or cloths.TEXTILES – GENERALVacuum fabric regularly using an upholstery attachment, and low suction or brush with a firm upholstery brush. Turn & rotate loose cushions regularly. Treat spills and stains as soon as possible. Gently blot spills away with a dry cloth. Do not apply any liquid cleaner to the fabric as this may result in permanent marking. Dry in the shade away from direct heat and sunlight. Allow to dry thoroughly before reuse. Avoid exposure of fabrics & leather to direct sunlight, as this is likely to cause fading & damageLEATHERAvoid placing leather in direct sunlight. Keep free of dust and grit. Never use harsh chemicals or acrylic cleaners, solvents or oils. Use leather protection cream 3-4 times a year, following manufacturer’s instructions for use. For cleaning use approved leather care product.NOTE: Under no circumstances must steam cleaning be used to clean upholstery. This may cause damage to the fabrics and/or any water based glues used to stabilise the fabric on the furniture. To remove stubborn stains, seek professional cleaning advice and the advice of the fabric supplier before using any proprietary cleaning systems, including dry cleaning.