petroleum centrifuge tubes - fox scientific oil tubes flyer test.pdfpetroleum centrifuge tubes for...
TRANSCRIPT
PETROLEUM CENTRIFUGE TUBESFor determination of water and sediment in crude oil
Proprietary Permanent Marking Technology• Markings and graduations applied using proprietary Lazer-Fused™ technology
• Superior resistance to aggressive solvents used in separation processing
• Unmatched readability and line uniformity throughout entire graduation range
Outstanding Volumetric Accuracy • The internal diameter is carefully controlled to maintain an accurate and reproducible tube
• The Lazer-Fused™ tubes provide the highest level of marking accuracy available
• Conforms to volume graduation requirements specified in API MPMS Chapter 10.4
• Tightest volumetric tolerance compared to competitors’ tubes
Improved Durability
• Lazer-Fused™ marking technology reduces the potential weaknesses acid and mechanical etching may cause
• Exceeds API MPMS Chapter 10.4 minimum RCF 500 x g centrifuge requirement
Readily Available• Products are manufactured in the US
• Short lead time with rapid order response
Graphic Customizations• Customized graphics available upon request
(i.e. QR code, Logos, Personalization - contact your sales
representative for additional details)
Excellent value• Following strict manufacturing practices combined with new Lazer-Fused™ technology, the Kimble Petroleum
Centrifuge Tubes offer the quality and performance you need at an exceptional price
45243LF-200 Volumetric Accuracy at 10 mL Test Point
Competitor 1 Competitor 2 Competitor 3 Kimble Lazer-Fused™ Tubes
ABC PETROLEUM
Part Number Description
Capacity (mL)
OD (mm)
Length (mm)
Max RCF
Case Qty
45241LF-100 Laser-Fused™ 8” Oil and Weathering (End Point Index) Centrifuge Tubes
100 37 203 800 12
Lazer-Fused™ 6” SHORT CONE CENTRIFUGE TUBES
For determination of water and sediment in crude oil
• Calibrated to contain
• 45243LF-200 is graduated in percent (200% equals 100 mL)
• Top is tooled to accept snap cap 28150R-6
Part Number Description
Capacity (mL)
OD (mm)
Length (mm)
Max RCF
Case Qty
45240LF-100 Laser-Fused™ 8” Long Cone Oil Centri-fuge Tube
100 37 203 800 12
Lazer-Fused™ 8” LONG CONE CENTRIFUGE TUBES
Used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products (D1796 and MPMS 10.4 standards); in determination of volume of precipitate, black oils and other lubricating oils (ASTM D91 and D128); and in testing for acidity of distillation residues or hydrocarbon liquids of gasoline or petroleum solvents (ASTM D1093).
• Calibrated to contain
• Top is tooled to accept snap cap 28150R-6
• Referenced in ASTM D4007
Lazer-Fused™ 8” OIL AND WEATHERING (END POINT INDEX) CENTRIFUGE TUBES
Can be used in the determination of residues in Liquified Petroleum (LP) gases, ASTM Method D2158
• Calibrated to contain
• Top is tooled to accept snap cap 28150R-6
ACCESSORIES
Part Number Description
CaseQty
28150R-6 Yellow polyethylene snap cap 6
Part Number Description
Capacity (mL)
OD (mm)
Length (mm)
Max RCF
Case Qty
45243LF-100 100 mL Laser-Fused™ 6” Short Cone Oil Centrifuge Tube
100 45 165 800 12
45243LF-200 200% Laser-Fused™ 6” Short Cone Oil Centrifuge Tube
100 (200 %) 45 165 800 6