pf10 power feed trim saw - mk diamond...pf10 power feed trim saw parts list caution: read all safety...
TRANSCRIPT
PF10 Power Feed Trim SawParts List
Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all times.
Revision 105 07.2013
Manual Part No. 161090 Barranca Diamond Products, Inc.1315 Storm ParkwayTorrance, CA 90501Toll-Free: (800) 630-7682Phone: (310) 523-5867Fax: (310) 257-3063www.barrancadiamond.com
26
H5
L13
A1
A2
A3
A4A5
A6
C1
C2
C1A
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11D12
D13 D8
D7
F1
F2
F3
G1
G2
G3
G4
G5
H1
H2
H4
H3
L1
L2
L3
L4L5
L6
L7
L8
L9
L10L11
L12
M1
M2
M3
N1
N2
N3
N4
P1
P2
P3
P4
P5
PF10 EXPLODED VIEW
27
E1
E4
E6
E7
E5
E3
E2
J1
J2
J3
J4
J4A
J5
J6
J7
J9
J8
K1
K2
K3
K4K5
K6
K7
K8
K9
K10
K11
K12
K13
K14
K15
K16
PF10 EXPLODED VIEW
28
Item Description Qty Part #A Assembly, AccessoriesA1 Guard, Splash 1 161023A2 Screw, Round Head Machine 10-32 x 1" 2 161042A3 Spacers, Splash Guard 2 161076A4 Washer, Flat SAE # 10 2 154369A5 Nut, Hex 10-32 2 156269A6 Blade, MK-303 10 x 040 x 5/8" 1 153696
C Assembly, TankC1 Tank, Oil or Water 1 161016C1A Screw, Hex HD 5/16"-18 x 1-1/4" 4 153950C2 Plug, Drain 1/2" 1 161021
D Assembly, Holding ViseD1 Vise, Front Jaw 1 161027D2 Vise, Rear Jaw 1 161028D3 Wood Liner, Front Jaw 1 161031D4 Wood Liner, Rear Jaw 1 161032D5 Screw, Flat HD 10-32 x 1/2" 4 154541D6 Nut, Hex 3/8"-16 1 101188D7 Nut, Wing 3/8"-16 3 161037D8 Washer, Flat SAE 3/8" 2 150923D9 Handle, Cross Feed 1 161044D10 Collar, Side Feed 1 161077D11 Screw, Set 10-32 x 3/16" 2 161038D12 Rod, Threaded 3/8"-16 x 6" 2 161034D13 Rod, Threaded 3/8"-16 x 7" 1 161081
E Assembly, EngageE1 Bracket, Clutch 1 161060E2 Handle, Clutch Engage 1 161061E3 Clutch 1 161062E4 Collar, Clutch Engage 1 161063E4A Screw, Set 8-32 x 1/4" 1 161086E5 Screw, Rnd Head Machine 10-32 x 1-1/2" 3 161064E6 Washer, Flat SAE # 10 5 154369E7 Nut, Hex 10-32 4 156269
F Assembly, Belt GuardF1 Guard, Belt 16 GA. (steel) 1 161072
PF10 PARTS LIST
29
F2 Screw, Round Head Machine 10-32 x 1/4" 2 161041F3 Belt, Micro-V 1 161085G Assembly, Blade GuardG1 Guard, Blade 1 161068G2 Screw, Pan Head Machine 10-32 x 1-3/4" 1 161039G3 Washer, Flat SAE # 10 2 154369G4 Nut, Acorn 10-32 1 161040G5 Thumbscrew, Blade Guard Adj. 1/4-20 x 1/2" 1 161025
H Assembly, MotorH1 Motor, 3/4 hp, 120V, 60Hz 1 161069H2 Pulley, Motor 1 161070H2A Screw, Set 10-32 x 1/2" 1 161087H3 Washer, Flat SAE 5/16" 8 151754H4 Nut, Hex 5/16"-18 8 101196H5 Cord, Power 14/3 SJTWX5-15PX10 1 158205
J Assembly, ShaftJ1 Shaft, Casting 1 161075J2 Pulley, Shaft 1 161020J2A Screw, Set 10-32 x 5/16" 1 161088J3 Shaft, Blade PF10 Bearing, Shaft PF10 1 162562J4 Collar, Shaft Pin 1 161017J4A Collar Shaft 1 161089J5 Gasket, Shaft 1 161043J6 Flange, Blade 2-1/4" OD X 5/8" Arbor 2 135830J7 Nut, 5/8"-18 UNF 1 135848J8 Screw, Hex HD 5/16"-18 x 1-1/4" 4 153950J9 Nut, Hex 5/16"-18 4 101196
K Assembly, Sliding SystemK1 Vise, Platform 1 161026K2 Screw, Shoulder Thumb 1/4"-20 x 1 1 160461K3 Nut, Pem 1/4"-20 1 161078K4 Guides, Nylon 2 161033K5 Bracket, Drive Screw 1 161057K6 Bushing, Shoulder Bronze 5/16"ID, 18/32"OD 1 161058K7 Screw, Hex HD 1/4"-20 x 3/4" 1 161036K8 Washer, Flat SAE 1/4" 1 151915K9 Nut, Hex 1/4"-20 1 151893K10 Screw, Round Head Machine 10-32 x 1/4" 4 161041
PF10 PARTS LIST
30
K11 Washer, Flat SAE # 10 1 154369K12 Slide Plate, Vise 1 161035K13 Slider, Upper Brass 1 161029K14 Slider, Lower Brass 1 161030K15 Screw, Round Head Machine 10-32 x 1" 4 161042K16 Nut, Hex 10-32 4 156269
L Assembly, Linear FeedL1 Housing, Gear Motor 1 161046L2 Cover, Gear Motor Housing 1 161047L3 Motor, Gear 1 161050L4 Receptacle, Electric 1 161051L5 Coupling, Drive Screw 1 161059L6 Screw, Set 10-32 x 3/16" 2 161038L7 Screw, Truss Hd. 8-32 x 1/2" 4 161055L8 Bracket, Switch 1 161048L9 Cover, Switch Bracket 1 161049L10 Switch, Feed 1 161052L11 Screw, Round Head Machine 10-32 x 1/4" 6 161041L12 Screw, Drive 3/8"-24 1 161056L13 Cord, Power 14/3 SJTWX5-15PX10 1 158205
M Assembly, TableM1 Table, Saw 1 161022M2 Gasket, Table 1 161019M3 Screw, Flat HD 1/4"-20 x 1/2" 4 155812
N Assembly, On-Off SystemN1 Rod, On/Off Switch 1 161065N2 Collar, Rod 1 161066N3 Screw, Thumb 10-32 x 1/2" 1 161067N4 Spring, Rod 1 161082
P Assembly, HoodP1 Hood, Steel 16 GA. 1 161071P2 Window, Hood 1/8 x 9.2 x 16.6 1 161073P3 Clip, Hood Steel 16 GA. 6 161080P4 Screw, Round Head Machine 10-32 x 1/4" 6 161041P5 Nut, Hex 10-32 6 156269
PF10 PARTS LIST
31
NOTES
32
Barranca Diamond warrants to the original retail purchaser for a period of 1 year except as noted, from the date of purchase all products covered by this Warranty to be free of defects in materials and workmanship.
This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that had been damaged in transit or handling, or that have been altered or repaired by unauthorized representatives. This Warranty does not cover defects caused by or resulting from misuse, abuse, neglect or damage caused by accident or the failure to provide reasonable maintenance. This Warranty is void if the product or any of its individual components is altered or modified by the purchaser or if the product is used in a manner or with a blade not recommended by the manufacturer.
Any claim arising under this Warranty must be submitted by the original purchaser within the warranty period specified above, and shall include proof of purchase. During said warranty period Barranca Diamond shall, at its option, either replace or repair, at no charge to the original purchaser, any parts or components that are found to be defective by Barranca Diamond. Barranca Diamond shall not be responsible for or obligated to pay for freight or other transportation related costs or expenses in connection with any defective products or components that are either returned to Barranca Diamond’s facility or any authorized repair station and/or any replacement products or components that are shipped from Barranca Diamond pursuant to this Warranty.
Parts and labor needed to maintain products and the replacement of components due to normal wear and tear are the purchaser’s responsibility and are not covered by this Warranty. All products or components replaced under warranty become the property of the manufacturer. All replacement parts will be considered to be part of the original product and any warranty on such parts will expire coincidentally with the original Warranty. Barranca Diamond will pay for parts and labor in connection with warranty repairs conducted by Barranca Dia-mond or its authorized repair centers. Replacement part(s) installed by anyone else will be provided without a charge for such replacement part(s), but this Warranty will not apply to labor charges in connection therewith.
IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND BARRANCA DIAMOND SHALL NOT BE LI-ABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.The foregoing constitutes an expressed warranty on the terms set forth above and is the only warranty or warranties applicable to the products it covers. All other warranties, including, without limitation, the implied warranty of merchantability and/or fitness for a particular purpose or use being denied. This limited warranty is expressly in lieu of all other warranties, whether expressed or implied.
Barranca DiamonD LimiteD WarrantyPlease complete the warranty registration card and return. Any problems encountered should be directed to Barranca Diamond Customer Service department at (800) 630-7682 M-F 8am - 5pm PST.
NOTE THIS INFORMATION FOR FUTURE USE:
MODEL NUMBER:
SERIAL NUMBER:
PURCHASE PLACE:
PURCHASE DATE:
PF10 WARRANTY
33
Specifics Applicable to Limited Warranty of Diamond Blades and Core Bits:
Laser Welded Blade and Bit Warranty: If the laser weld between the segment and the steel core or barrel fails during normal use, the blade or bit will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty.
Brazed Blade, Bit, and Cup Wheel Warranty:If the brazed bond between the segment and the core, barrel, or cup fails within the first .050 of seg-ment wear, the blade, bit, or cup will be replaced free of charge. Blades, bits, and cup wheels dam-aged due to careless or improper use are not covered under this warranty.
Continuous Rim Blade Warranty: If the bond between the rim and the core fails during normal use, the blade will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this war-ranty.
Exclusions:Barranca Diamond does not warrant the following components, which carry their own manufacturer’s warranty for the indicated periods:
Electric Motors Manufacturer’s Warranty Baldor: 1 yearRyobi: 1 YearSoga: 1 Year
Gas Engines Manufacturer’s WarrantyHonda: 2 years
Engine Power InformationEngine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Barranca Diamond Products makes no claim, representation or Warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.
PF10 WARRANTY
34
rePLacement PartSReplacement parts for this tool may be ordered from your Barranca Diamond distributor or directly from Barranca Diamond. Please have the following information ready before calling:• Model and serial number of the machine• Date of purchase• Description of parts being ordered (see parts list)
retUrn materiaLS ProceDUreTo expedite the service relative to the return of a product purchased through Barranca Diamond, please have the following information available:• Model and serial number of the machine• Date of purchase• Distributor’s name
Then please call Barranca Diamond at (310) 523-5867 or toll free at 800-630-7682 to obtain a Return Goods Authorization number (RGA) authorizing the return.
Please Note:• Ensure your item(s) are prepaid to the destination• Return items must have been purchased within the previous twelve (12) months• Follow the packaging instructions in the following section• Be sure to include the RGA number, return address and your phone number on or within the return shipping box.
PacKaGinG inStrUctionSShip the equipment using its original shipping crate if possible. Secure inside the shipping crate. Ensure all parts are secured in the packaging to prevent movement. Do not ship the equipment partially exposed.
PF10 REPLACEMENT PARTS
35
NOTES
Barranca Diamond Products, Inc.1315 Storm ParkwayTorrance, CA 90501
Toll-Free: (800) 421-5830Phone: (310) 539-5221
Fax: (310) 539-5158www.barrancadiamond.com