ph. no. 08622-212769, e-mail: [email protected]...

GEETHANJALI INSTITUTE OF SCIENCE & TECHNOLOGY Unit of USHODAYA EDUCATIONAL SOCIETY

(Approved by AICTE, New Delhi & Permanently Affiliated to JNTUA, Anantapur)

JNTUA College Code: 2U An ISO 9001:2015 certified Institution: Recognized under Sec. 2(f) of UGC Act, 1956 3rd Mile, Bombay Highway, Gangavaram (V), Kovur(M), SPSR Nellore (Dt), Andhra Pradesh, India- 524137

Ph. No. 08622-212769, E-Mail: [email protected], Website: www.gist.edu.in

DEPARTMENT OF CIVIL ENGINEERING

Facility Total

Number Room Number

Required

Carpet Area In

Sq.m per Room

(as per AICTE

norms)

Available

Carpet Area

in Sq.m

Class Rooms (UG) 6

NB-202

NB-203

NB-204

NB-205

AB-202

AB-203

66

66

66

66

66

66

67.91

78.63

78.63

77.32

75.91

72.84

Tutorial Rooms (UG) 2 WB-305

WB-306

33

33

66.01

66.01

Surveying Laboratory-I 1 MB-008 66 87.12

Surveying Laboratory-II 1 MB-008 66 87.12

Strength of Materials

Laboratory 1 NB-005 66 77.58

Fluid Mechanics & Hydraulic

Machinery Laboratory 1 S2-001 66 104.67

Geotechnical Engineering

Laboratory 1 S2-006 66 87.06

Engineering Geology

Laboratory 1 MB-007 66 76.65

Concrete Technology

Laboratory 1 S2-004 66 89.25

Transportation Engineering

Laboratory 1 S2-005 66 83.13

Environmental Engineering 1 MB-006 66 76.65

Cad Laboratory 1 WB-104 66 70.14

http://www.gist.edu.in/





CIVIL CLASS ROOMS

NB -202 (II civil - A) AREA:67.91 sqm NB -203 (II civil – B) AREA:78.63 sqm

NB -204 (III civil – A) AREA: 78.63 sqm NB-205 (III Civil - B) AREA:77.32 sqm

AB -202 (IV civil – A) AREA:75.91 sqm AB -203 (IV civil – A) AREA:72.84 sqm






TUTORIAL CLASS ROOMS

WB -305 Area:66.01 sqm

WB -306 Area:66.01 sqm






LABORATORIES

Surveying Laboratory-I (15A01306)

Room No: MB-008 Regulation: R15

Carpet Area: 87.12 sqm Year&Semester: II & I

The objective of this laboratory is to learn about measurement of distances, angles, reduced

levels and setting out works. The experiments include determination of distances using chain and

tape, reduced levels and contours using level, bearing of lines using compass, horizontal and vertical

angles using Theodolite and graphical method using plane table. Use of modern equipment like total

station will be demonstrated. This laboratory course will help the students to understand the

theoretical concepts learned in the course surveying.






LIST OF EXERCISES:

(1) Survey of an area by chain survey (Closed traverse) & Plotting

(2) Chaining across obstacles

(3) Determination of distance between two inaccessible points with compass.

(4) Surveying of a given area by prismatic compass (Closed traverse) and plotting after

adjustment.

(5) Radiation method, intersection methods by plane Table survey

(6) Two point and three point problems in plane table survey.

(7) Traversing by plane table survey

(8) Fly leveling (differential leveling)

(9) An exercise of L.S. and C.S. and plotting.

(10) Two exercises on contouring.






Surveying Laboratory-II (15A01406)


Carpet Area: 87.12 sqm Year&Semester: II & II






List of Experiments:

1. Study of theodolite in detail – practice for measurement of horizontal and vertical angles.

2. Measurement of horizontal angles by method of repetition and reiteration.

3. Trigonometric Leveling – Heights and distance problem (Two Exercises).

4. Heights and distance using Principles of tachometric surveying (Two Exercises)

5. Curve setting – different methods. (Two Exercises)

6. Setting out works for buildings & pipe lines.

7. Determination of area using total station.

8. Traversing using total station.

9. Contouring using total station.

10. Determination of remote height using total station.

11. Distance, gradient, Diff. height between tow inaccessible points using total stations.






Strength of Materials Laboratory (15A01307)

Room No: NB-005 Regulation: R15

Carpet Area: 77.58sqm Year & Semester: II & I

The objective of strength of materials laboratory is to determine the forces, stresses,

deflections and behavior of various structural members like beams, columns, arches, trusses and

frames when subjected to different types of loadings. This laboratory course will help the students to

understand the theoretical concepts learned in the courses strength of materials I & II and structural

analysis I & II.






List of exercises:

1. Tension test.

2. Bending test on (Steel/Wood) Cantilever beam.

3. Bending test on simply supported beam.

4. Torsion test.

5. Hardness test.

6. Spring test.

7. Compression test on wood or concrete

8. Impact test

9. Shear test

10. Verification of Maxwell’s Reciprocal theorem on beams.

11. Use of electrical resistance strain gauges.

12. Continuous beam – deflection test.






Fluid Mechanics & Hydraulic Machinery Laboratory (15A01405)

Room No – S2-001 Regulation – R15

Carpet Area -104.67sqm Year & Semester: II & II

The objective of this laboratory is to determine the various parameters related to fluid flow in

pipes and in open channels and to study the characteristics of pumps and turbines. The experiments

include determination of friction factor, minor loss coefficients, and coefficient of discharge of

constriction meters, orifices, mouth pieces, notches and weirs, characteristics of flow profiles and

hydraulic jump and characteristics of pumps and turbines and verification of momentum theorem.

This laboratory course will help the students to understand the theoretical concepts learned in the

courses fluid mechanics and open channel flow and hydraulic machinery.






List of experiments:

1. Calibration of Venturimeter

2. Calibration of Orifice meter

3. Determination of Coefficient of discharge for a small orifice by a constant head method.

4. Determination of Coefficient of discharge for an external mouth piece by variable head method.

5. Calibration of contracted Rectangular Notch and /or Triangular Notch.

6. Determination of Coefficient of loss of head in a sudden contraction and friction factor.

7. Verification of Bernoulli’s equation.

8. Impact of jet on vanes.

9. Study of Hydraulic jump.

10. Performance test on Pelton wheel turbine.

11. Performance test on Francis turbine.

12. Efficiency test on centrifugal pump.






Geotechnical Engineering Laboratory (15A01509)

Room No: S2-006 Regulation: R15

Carpet Area: 87.06sqm Year & Semester: III & I

The objective of Geo-technical Engineering laboratory is to determine the physical and

engineering properties of soil which are required for suitable design of foundations for any structure.

Physical properties include specific gravity, moisture content, density and consistency limits namely,

liquid, plastic and shrinkage limits of soil. The engineering properties include permeability,

consolidation, compressibility, shear strength and bearing capacity of soil. By evaluating the

properties of soil in the laboratory, students will be able to relate the concepts studied in the relevant

theory course. Also students can utilize the knowledge of both theory and practical in the field

application to real problems. In this laboratory both laboratory and in-situ experiments can be

conducted. This laboratory course will help the students to understand the theoretical concepts

learned in the course Geotechnical Engineering.







1. Atterberg‟s Limits.

2. Field density-core cutter and sand replacement method

3. Grain size analysis

4. Permeability of soil, constant and variable head test

5. Compaction test

6. CBR Test

7. Consolidation test

8. Unconfined compression test

9. Tri-axial Compression test

10. Direct shear test.

11. Vane shear test






Engineering Geology Laboratory (15A01508)


Carpet Area: 76.65sqm Year & Semester: III & I

The objective of this laboratory is to study the geologic factors that affect the location, design,

construction, operation and maintenance of different civil engineering structures. In this laboratory,

physical properties of minerals and rocks, geological properties like strike and dip of the bedding

planes and study of different maps can be carried out. The basic ideas, learned about the geological

conditions in a location will enable the students for proper design of foundations, location of ground

water and design of structures for earthquake resistance. This laboratory course will help the students

to understand the theoretical concepts learned in the course engineering geology.






List of exercises:

1. Study of physical properties and identification of minerals referred under theory.

2. Megascopic description and identification of rocks referred under theory.

3. Interpretation and drawing of sections for geological maps showing tilted beds, faults,

Uniformities etc.

4. Simple Structural Geology problems






Concrete Technology Laboratory (15A01609)


Carpet Area: 89.25sqm Year & Semester: III & II

The objective of concrete laboratory is to determine the physical properties of building

construction materials like cement, fine and coarse aggregate, steel, wood, and strength

characteristics of cement mortar, plain cement concrete and reinforced cement concrete. The tests

include determination of specific gravity, fineness, normal consistency, setting times, workability and

soundness of cement, fineness modulus of fine and coarse aggregate, strength of cement mortar,

cement concrete and bricks, tensile test on steel rods, bending and flexural strength on concrete,

bending test on wood, and non destructive test on concrete. The students will be able to infer the

suitability of these materials for construction. They can design the mix, make the specimens and test

the same for the strength for comparison with design strength. This laboratory course will help the

students to understand the theoretical concepts learned in the course building materials and concrete

technology.







1. Normal Consistency of fineness of cement.

2. Initial setting time and final setting time of cement.

3. Specific gravity and soundness of cement.

4. Compressive strength of cement.

5. Workability test on concrete by compaction factor, slump and Vee-bee.

6. Young‟s modulus and compressive strength of concrete.

7. Specific Gravity and Water Absorption of Coarse aggregate.

8. Bulking of Fine aggregate.

9. Non-Destructive testing on concrete (for demonstration)






Transportation Engineering Laboratory (15A01610)


Carpet Area: 83.13sqm Year & Semester: III & II

The objective of transportation engineering laboratory is to determine the properties of coarse

aggregates and bitumen. Experiments include tests for impact, abrasion, attrition test and crushing

strength for coarse aggregate and tests for penetration, ductility, viscosity, softening point and flash

and fire point for bitumen. The students will be able to infer the suitability of these materials for

construction of road. This laboratory course will help the students to understand the theoretical

concepts learned in the course transportation engineering.







I. Road Aggregates:

1. Aggregate Crushing value

2. Aggregate Impact Test.

3. Specific Gravity and Water Absorption.

4. Abrasion Test.

5. Shape tests

I. Bituminous Materials:S

1. Penetration Test.

2. Ductility Test.

3. Softening Point Test.

4. Flash and fire point tests.

III Traffic Field Studies

1. Traffic Volume Studies at Mid-block and Data Analysis

2. Traffic Volume Studies at Intersection and Data Analysis

3. Speed Studies and Data Analysis






Environmental Engineering Laboratory (15A01712)

Room No: MB – 006 Regulation: R15

Carpet Area: 76.65sqm Year & Semester: IV & I

The objective of this laboratory is to determine the qualities of water and waste water,

quality of air and noise characteristics. The experiments include the determination of pH,

turbidity, conductivity, and impurities in water and BOD, DO and COD of waste water this

laboratory course will help the students to understand the theoretical concepts learned in the

course of Environmental engineering.







1. Determination of pH and Turbidity

2. Determination of Conductivity and Total dissolved solids.

3. Determination of Alkalinity/Acidity.

4. Determination of Chlorides.

5. Determination and Estimation of total solids, organic solids and inorganic solids.

6. Determination of iron.

7. Determination of Dissolved Oxygen.

8. Determination of Nitrogen.

9. Determination of total Phosphorous.

10. Determination of B.O.D

11. Determination of C.O.D

12. Determination of Optimum coagulant dose.

13. Determination of Chlorine demand.

14. Presumptive coliform test.






Cad Laboratory (15A01711)

Room No: WB – 104 Regulation: R15

Carpet Area: 70.14 sqm Year & Semester: IV & I






List of Excercisies:

1. 2-D Frame Analysis and Design

2. Steel Tabular Truss Analysis and Design

3. 3-D Frame Analysis and Design

4. Retaining Wall Analysis and Design

5. Simple tower Analysis and Design

6. One Way Slab Analysis & Design

7. Two Way Slab Analysis & Design

8. Column Analysis & Design


ph. no. 08622-212769, e-mail: [email protected]...

Documents