phato ver.2 pdf
DESCRIPTION
phatology defect UiTMTRANSCRIPT
DEFECT IN THE HOUSE CRACKS
Hairline crack of wall, corner wall
crack, floor crack, drainage,
crack from ceiling to wall and
crack between door frame & wall
Located at car porch, internal &
external wall, ceiling, apron, col-
umn stump and door of room.
Because of weather, improper in-
stallation of door or window, poor
workmanship and loading
Remove the unless part of the
wall. The gap at the area need to
apply with cement mortar and
second apply with skim coat.
Paint the area.
STAINS
It caused by water penetration
or dampness of the wall. It also
caused by poor workmanship.
Stains will spread to the entire
surface of the wall. The colors
on the walls will become faded
and unsightly.
Located at store room wall.
Arrest moisture source. Prepare
and treat the surface. Repaint
with appropriate system.
PEELING
Peeling caused by dampness. The
dampness happens because this wall
is near a bathroom. Water will pene-
trate to wall and cause dampness. The
wall may have serious peeling defect
and look very yellowish also contribute
to fungi enlargement. Located at wall
near bathroom.
Treat the dampness with lubrication
coating first. Clean up the dampness
and faded area of the wall. Re-coat
and repainting the wall with under-
coat and topcoat.
DAMPNESS
It caused fungi and yellowish
the ceiling board. Occurs on
ceiling board because of the
water leakage from the roof. It
will collapse if no action to
repair it.
Located at ceiling at the living
room and wall in bathroom.
Repair the leakage pipe and
install new ceiling board with
paint. For the bathroom wall,
clean up the wall and apply
with wall tiles or painted with
waterproof paint.
GROUP MEMBERS:
MUHAMMAD NUR AFIQ BIN MD FUAD
2014693818
MOHD ZULFAKARUDIN BIN SHUKRI
2014843364
MUHAMMAD HAFIZ BIN ZULKEFLI
2014895518
NUR AMALINA BINTI AZMI
2014838364
SITI NORLIYANA BINTI ABD LATIF
2014817194
CORROSSION
It is caused by hot and mild
weather that corrode the steel
grill. It will affect to human
health.
Located at door grill, window
grill all around the house
Brush with sandpaper and ap-
ply paint anti-corrosion to pro-
tect steel from future corrosion
problem again.
RUSTING
It is cause due to the moisture
in the kitchen such as water
and oil. It also cause by
corrosion of metal fitting in the
area.
Located at wall in bathroom,
kitchen floor tile and bathroom
door.
Clean up the rust tiles with anti-
rust liquid. Change for the new
tile if the tile cannot be re-
paired.
BROKEN/DAMAGE TILES
Caused by improper installation
and load carried. The broken
tiles are sharp and can harm
occupant and water can pen-
etrate easily into concrete slab.
Located at Bathroom floor
&wall (tiles), door, ceiling at
bedroom & internal area.
Make sure the toilet is dry and
remove all reminding broken
tiles. Apply waterproof lubrica-
tion coating to the floor and let
it dry. Replace broken tiles with
a new one and install.
BLISTERING
It cause by the dirty atmosphere
in the kitchen. The paint trap dirty
atmosphere such as oil and gas-
es then cause blistering on the
wall.
Located at kitchen wall , master
bedroom wall and store wall.
Remove old paint that effected,
sanding and scraping the sur-
face until smooth. Start repaint-
ing with undercoat, the premier
and the finishing paint.
DETAILS
- One storey bungalow house type -
- Owned by Mr. Suhaimi Bin Abdullah -
- The address is No.4, Jalan Pinggiran Putra 2/5, Desa Pinggiran Putra,
43000, -Kajang, Selangor Darul Ehsan.
- The land area consist of 5000 of sq ft and build-up house of 1800 sq ft -
- The house contains 4 bedrooms, 2 toilets and 1 kitchen -
- The status of tenure of building are rented -
- House price RM 800, 000 above -
- It is leasehold Malay reserve land -
- Develop by Orchard Jaya Development Sdn. Bhd -
- The building started built in 2003 -
BITTERNESS
Bittiness is caused by dirt from the
surface or atmosphere during
painting process .The bittiness will
more worst and the dirty will
spread to other area and give
yellowing appearance.
Located at the internal wall area
Clean up the bittiness area by
sandpaper, Used clean brushed
and paint on clean surface to
prevent bittiness happens again.