phoenix g2 atx motherboard - phoenix g2 station alerting

1
Phoenix G2 ATX Motherboard 1. Only connect Phoenix G2 Peripheral CAT5 cables to POE (48VDC) Outputs. 2. Over Current Reset LED will only glow red if the system detects an over current.

Upload: others

Post on 11-Dec-2021

28 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Phoenix G2 ATX Motherboard - Phoenix G2 Station Alerting

Phoenix G2 ATX Motherboard

!

!1. Only connect Phoenix G2 Peripheral CAT5 cables to POE (48VDC) Outputs. 2. Over Current Reset LED will only glow red if the system detects an over current.