photovoltaics basic - bioenergy
DESCRIPTION
Photovoltaics Basic CatalogueTRANSCRIPT
photovoltaics|basic
055
Bioenergy Basic series is a perfect combination of high quality photovoltaic panels with the most competitive market price.
Monocrystalline and polycrystalline panels.
We supply several versions, sizes and powers all of them with a minimum performance warranty for 25 years.
Quality control system for programmed orders consisting in an analysis of the product prior to its departure from factory by TÜV independent laboratory thus the real power is guaranteed.
quality-price ratio
Bio Basic
photovoltaics | basic
056
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 25 years. After 10 years, modules still produce a minimumt 90% of their nominal performance. After 25 years modules still produce a minimum 80% or their nominal performance.
BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients.
Highly transparent solar glass of 3.2mm and anodized aluminum frame for a perfect stability and a long duration. Sheeting at constant temperature provides a perfect cure of the module avoiding the formation of bubbles. The distance between the edge of the frame and the cell circuitry is optimized to ensure both waterproof sealing and maximum module size reduction.
Electrical Characteristics Dimensions
Solar cells
Dimensions
Weight
No. Cells
Output cables length
Cable cross section
Construction
Junction boxConnectors
Mechanical Characteristics
Nominal operating cell temperature (NOCT)
Hail diameter 23 m/sContinuous wind pressure
Temperature Coefficients
Temperature coefficient of power (PMAX)
Temperature coefficient (VOC)
Temperature coefficient (ISC)
bio
175
-195
Reference
Maximum power (Wp)
Max. power voltage (Vmax)
Max. power current (Imax)
Open circuit voltage (Voc)
Short circuit voltage (Isc)
Operating temperature
Modulle Eff. (%)
Maximum system voltage
Power tolerance (%)
1580 x 808 x 35-45 mm
Monocristalline
15.5 kg
900 mm
4 mm2
Front: High transmission 3.2 mm tempered glass. Rear: White back sheet. Encapsulant: EVA
3 bypasses MC4 compatible
MO
NO
-CR
ISTA
LLIN
E
photovoltaics | basic
47 °C ± 2°C
-0.43 W/°C
-0.31 V/°C
0.03 A/°C
Up to 25mm
<5400 Pa
-40°C + 85°C
1000 V(IEC)0-3%
175 180 185 190 195
P110175 P110180 P110185 P110190 P110195
175 Wp 180 Wp 185 Wp 190 Wp 195 Wp
35.3 36.5 36.7 36.8 36.94
4.96 4.93 5.04 5.16 5.28
44.2 44.3 44.5 44.6 45.08
5.2 5.36 5.47 5.59 5.58
13.7 14.1 14.5 14.9 15.27
72 cells (125 x 125 mm) configured geometrically for 6x12 matrix connected in series
808
1580
758
900
B
A
AB
8- 9X14
2- 4
800
1
1300
1
057
Electrical Characteristics Dimensions
Mechanical Characteristics
bio
210
-230
Monocristalline
1482 x 992 x 40 mm
17 kg
900 mm
4 mm2
Front: High transmission 3.2 mm tempered glass. Low Iron.
3 bypasses
MC4 compatible
photovoltaics | basic
BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients.
Highly transparent solar glass of 3.2 mm.and anodized aluminum frame for a perfect stability and a long duration. Sheeting at constant temperature provides a perfect cure of the module avoiding the formation of bubbles. The distance between the edge of the frame and the cell circuitry is optimized to ensure both waterproof sealing and maximum module size reduction.
MO
NO
-CR
ISTA
LLIN
E
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 25 years: After 10 years, modules still produce a minimumt 90% of their nominal performance. After 25 years modules still produce a minimum 80% or their nominal performance.
Reference
Maximum power (Wp)
Max. power voltage (Vmax)
Max. power current (Imax)
Open circuit voltage (Voc)
Short circuit voltage (Isc)
Operating temperature
Modulle Eff. (%)
Maximum system voltage
Power tolerance (%)
Solar cells
Dimensions
Weight
No. Cells
Output cables length
Cable cross section
Construction
Junction boxConnectors
Nominal operating cell temperature (NOCT) 47 °C ± 2°C
Hail diameter 23 m/sContinuous wind pressure
Temperature Coefficients
Temperature coefficient of power (PMAX)
Temperature coefficient (VOC)
Temperature coefficient (ISC)
-0.43 W/°C
-0.31 V/°C
0.03 A/°C
Up to 25mm
<5400 Pa
-40°C + 85°C
1000 V(IEC)0-3%
210 215 220 225 230
P110210 P110215 P110220 P110225 P110230
210 Wp 215 Wp 220 Wp 225 Wp 230 Wp
27.60 27.90 28.20 28.60 29.10
7.60 7.70 7.80 7.85 7.90
33.00 33.30 33.70 33.90 34.40
8.48 8.60 8.70 8.85 8.90
14.3 14.6 15.0 15.3 15.6
54 cells (156 x 156 mm) configured geometrically for 6 x 9 matrix connected in series
992
1482
942
900
B
A
AB
8- 9X14
2- 4
700
1
1100
1
058
Dimensions
Mechanical Characteristics
bio
235
-250
Monocristalline
Electrical Characteristics
1655 x 992 x 45 mm
22.5 kg
900 mm
4 mm2
Front: High transmission 3.2 mm tempered glass. Low Iron.
3 bypasses MC4 compatible
photovoltaics | basic
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 25 years: After 10 years, modules still produce a minimumt 90% of their nominal performance. After 25 years modules still produce a minimum 80% or their nominal performance.
BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients.
Highly transparent solar glass of 3.2 mm.and anodized aluminum frame for a perfect stability and a long duration. Sheeting at constant temperature provides a perfect cure of the module avoiding the formation of bubbles. The distance between the edge of the frame and the cell circuitry is optimized to ensure both waterproof sealing and maximum module size reduction.
MO
NO
-CR
ISTA
LLIN
E
Reference
Maximum power (Wp)
Max. power voltage (Vmax)
Max. power current (Imax)
Open circuit voltage (Voc)
Short circuit voltage (Isc)
Operating temperature
Modulle Eff. (%)
Maximum system voltage
Power tolerance (%)
Solar cells
Dimensions
Weight
No. Cells
Output cables length
Cable cross section
Construction
Junction boxConnectors
Nominal operating cell temperature (NOCT)
Hail diameter 23 m/sContinuous wind pressure
Temperature Coefficients
Temperature coefficient of power (PMAX)
Temperature coefficient (VOC)
Temperature coefficient (ISC)
-0.43 %/°C
-0.31 %/°C
0.03 %/°C
Up to 25mm
<5400 Pa
47 °C ± 2°C
-40°C + 85°C
1000 V(IEC)0-3%
235 240 245 250
P110235 P110240 P110245 P110250
235 Wp 240 Wp 245 Wp 250 Wp
30.80 31.10 31.40 31.85
7.64 7.73 7.81 7.85
36.60 37.00 37.30 37.66
8.55 8.65 8.75 8.85
14.3 14.6 14.9 15.30
60 cells (156 x 156 mm) configured geometrically for 10 x 6 matrix connected in series
992
1655
942
1000
B
A
AB
8- 9X14
2- 4
725
1
1225
1
059
Dimensions
Mechanical Characteristics
bio
280
-300
Monocristalline
Electrical Characteristics
1956 x 992 x 45 mm
26 kg
1000 mm
4 mm2
Front: High transmission 3.2 mm tempered glass. Low Iron.
3 bypasses
MC4 compatible
photovoltaics | basic
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 25 years: After 10 years, modules still produce a minimumt 90% of their nominal performance. After 25 years modules still produce a minimum 80% or their nominal performance.
BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients.
Highly transparent solar glass of 3.2 mm.and anodized aluminum frame for a perfect stability and a long duration. Sheeting at constant temperature provides a perfect cure of the module avoiding the formation of bubbles. The distance between the edge of the frame and the cell circuitry is optimized to ensure both waterproof sealing and maximum module size reduction.
MO
NO
-CR
ISTA
LLIN
E
Reference
Maximum power (Wp)
Max. power voltage (Vmax)
Max. power current (Imax)
Open circuit voltage (Voc)
Short circuit voltage (Isc)
Operating temperature
Modulle Eff. (%)
Maximum system voltage
Power tolerance (%)
Solar cells
Dimensions
Weight
No. Cells
Output cables length
Cable cross section
Construction
Junction boxConnectors
Nominal operating cell temperature (NOCT)
Hail diameter 23 m/sContinuous wind pressure
Temperature Coefficients
Temperature coefficient of power (PMAX)
Temperature coefficient (VOC)
Temperature coefficient (ISC)
-0.43 %/°C
-0.31 %/°C
0.03 %/°C
Up to 25mm
<5400 Pa
45 °C ± 2°C
-40°C + 85°C
1000 V(IEC)0-3%
280 285 290 300
P110280 P110285 P110290 P110300
280 Wp 285 Wp 290 Wp 300 Wp
33.80 34.10 34.40 35.00
8.29 8.36 8.44 8.58
40.2 40.40 40.70 41.30
9.10 9.15 9.20 9.30
14.5 14.7 14.9 15.50
72 cells (156 x 156 mm) configured geometrically for 6 x 12 matrix connected in series
992
1956
942
1000
B
A
AB
8- 9X14
2- 4
1176
1
1676
1
Nominal operating cell temperature (NOCT)
Hail diameter 23 m/sContinuous wind pressure
Temperature coefficient of power (PMAX)
Temperature coefficient (VOC)
Temperature coefficient (ISC)
060
Dimensions
Mechanical Characteristics
bio
200
-220
Polycristalline silicon
Electrical Characteristics
-40°C + 85°C
1000 V(IEC)0-3%
200 205 210 215 220
200 205 210 215 220
26.84 27 27.3 27.6 27.9
7.45 7.6 7.7 7.8 7.9
32.7 33 33.3 33.8 34.2
8.16 8.28 8.4 8.5 8.6
13.6 14 14.28 14.6 14.96
1482x992x40 mm
17 kg
54 pcs (156x 156 mm) Silicon(6x9mm)
1000 mm
4 mm2
High transmission , low iron, tempered glass 3.2 mm
3 bypasses
MC4 compatible
photovoltaics | basic
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 25 years: After 10 years, modules still produce a minimumt 90% of their nominal performance. After 25 years modules still produce a minimum 80% or their nominal performance.
BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients.
Highly transparent solar glass of 3.2 mm.and anodized aluminum frame for a perfect stability and a long duration. Sheeting at constant temperature provides a perfect cure of the module avoiding the formation of bubbles. The distance between the edge of the frame and the cell circuitry is optimized to ensure both waterproof sealing and maximum module size reduction.
Temperature Coefficients
POLY
-CR
ISTA
LLIN
E
Reference
Maximum power (Wp)
Max. power voltage (Vmax)
Max. power current (Imax)
Open circuit voltage (Voc)
Short circuit voltage (Isc)
Operating temperature
Modulle Eff. (%)
Maximum system voltage
Power tolerance (%)
Solar cells
Dimensions
Weight
No. Cells
Output cables length
Cable cross section
Construction
Junction boxConnectors
47 °C ± 2°C
-0.40 W/°C
-0.30 V/°C
0.04 A/°C
Up to 25mm
< 5400 Pa
P120200 P120205 P120210 P120215 P120220
942
900
B
A
AB
8- 9X14
2- 4
700
1
1100
1
A-A
A6:1 3
6
5:1 5:145
35
45
35
B-B
992
1482
061
Dimensions
Mechanical Characteristics
bio
225
-245
Polycristalline silicon
Electrical Characteristics
-40°C + 85°C
1000 V(IEC)0-3%
225 230 235 240 245
225Wp 230Wp 235Wp 240Wp 245Wp
30 30.2 30.5 30.8 31.1
7.5 7.62 7.71 7.8 7.89
36.6 36.9 37 37.2 37.4
8.2 8.31 8.4 8.55 8.65
13.7 14 14.3 14.6 14.9
1655x992x40 mm
22.5 kg
60 pcs (156 x 156 mm) Poly-Crystalline Silicon (6x10mm)
1000 mm
4 mm2
High transmission, Low Iron, Tempered Glass 3.2 mm
3 bypasses
MC4 compatible
photovoltaics | basic
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 25 years: After 10 years, modules still produce a minimumt 90% of their nominal performance. After 25 years modules still produce a minimum 80% or their nominal performance.
BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients.
Highly transparent solar glass of 3.2 mm.and anodized aluminum frame for a perfect stability and a long duration. Sheeting at constant temperature provides a perfect cure of the module avoiding the formation of bubbles. The distance between the edge of the frame and the cell circuitry is optimized to ensure both waterproof sealing and maximum module size reduction.
POLY
-CR
ISTA
LLIN
E
Reference
Maximum power (Wp)
Max. power voltage (Vmax)
Max. power current (Imax)
Open circuit voltage (Voc)
Short circuit voltage (Isc)
Operating temperature
Modulle Eff. (%)
Maximum system voltage
Power tolerance (%)
Solar cells
Dimensions
Weight
No. Cells
Output cables length
Cable cross section
Construction
Junction boxConnectors
Nominal operating cell temperature (NOCT)
Hail diameter 23 m/sContinuous wind pressure
Temperature coefficient of power (PMAX)
Temperature coefficient (VOC)
Temperature coefficient (ISC)
Temperature Coefficients
47 °C ± 2°C
-0.40 W/°C
-0.30 V/°C
0.04 A/°C
Up to 25mm
< 5400 Pa
P120225 P120230 P120235 P120240 P120245
A-A
A6:1 3
6
5:1 5:145
35
45
35
B-B
942
900
B
A
AB
8- 9X14
2- 4
725
1
1225
1
992
1655
062
Dimensions
Mechanical Characteristics
bio
260
-280
Polycristalline silicon
1956x992x45 mm
26 kg
72 pcs (156 x 156 mm) Poly-Crystalline Silicon (6x12mm)
1250 mm
4 mm2
High transmission, Low Iron, Tempered Glass 4.0 mm
3 bypasses
MC4 compatible
Electrical Characteristics
-40°C + 80°C
1000 V(IEC)0-3%
260 W 265 W 270 W 275 W 280 W
260Wp 265Wp 270Wp 275Wp 280Wp
35.60 35.80 36.10 36.37 38.60
7.30 7.40 7.48 7.56 7.66
43.50 43.50 43.60 44.00 44.20
8.05 8.10 8.20 8.20 8.26
13.40 13.70 13.90 14.20 14.40
photovoltaics | basic
The 10 years product warranty surpasses the warranty required by law. The performance warranty is for 25 years: After 10 years, modules still produce a minimumt 90% of their nominal performance. After 25 years modules still produce a minimum 80% or their nominal performance.
BIOENERGY Solar Photovoltaic Panels stand for quality, durability and most importantly, high-performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients.
Highly transparent solar glass of 3.2 mm.and anodized aluminum frame for a perfect stability and a long duration. Sheeting at constant temperature provides a perfect cure of the module avoiding the formation of bubbles. The distance between the edge of the frame and the cell circuitry is optimized to ensure both waterproof sealing and maximum module size reduction.
POLY
-CR
ISTA
LLIN
E
Nominal operating cell temperature (NOCT)
Hail diameter 23 m/sContinuous wind pressure
Temperature coefficient of power (PMAX)
Temperature coefficient (VOC)
Temperature coefficient (ISC)
Temperature Coefficients
Reference
Maximum power (Wp)
Max. power voltage (Vmax)
Max. power current (Imax)
Open circuit voltage (Voc)
Short circuit voltage (Isc)
Operating temperature
Modulle Eff. (%)
Maximum system voltage
Power tolerance (%)
Solar cells
Dimensions
Weight
No. Cells
Output cables length
Cable cross section
Construction
Junction boxConnectors
47 °C ± 2°C
-0.40 W/°C
-0.30 V/°C
0.04 A/°C
Up to 25mm
< 5400 Pa
P120260 P120265 P120270 P120275 P120280
942
1000
B
A
AB
8- 9X14
2- 4
1176
1
1676
1
A-A
A6:1 3
6
5:1 5:145
35
45
35
B-B
992
1956