phpt60410ny - nexperiaphpt60410ny agylg5pe,ayaqvm:a9ii5pnwbk5gkg5pgl nexperia phpt60410ny 40 v, 10 a...

PHPT60410NY40 V, 10 A NPN high power bipolar transistor27 January 2015 Product data sheet

1. General descriptionNPN high power bipolar transistor in a SOT669 (LFPAK56) Surface-MountedDevice (SMD) power plastic package.

PNP complement: PHPT60410PY

2. Features and benefits• High thermal power dissipation capability• High temperature applications up to 175 °C• Reduced Printed Circuit Board (PCB) requirements comparing to transistors in DPAK• High energy efficiency due to less heat generation• AEC-Q101 qualified.

3. Applications• Power management• Load switch• Linear mode voltage regulator• Backlighting applications• Motor drive• Relay replacement

4. Quick reference dataTable 1. Quick reference dataSymbol Parameter Conditions Min Typ Max Unit

VCEO collector-emittervoltage

open base - - 40 V

IC collector current - - 10 A

ICM peak collector current single pulse; tp ≤ 1 ms - - 20 A

RCEsat collector-emittersaturation resistance

IC = 10 A; IB = 1 A; pulsed; tp ≤ 300 µs;δ ≤ 0.02; Tamb = 25 °C

- 28 40 mΩ

© Nexperia B.V. 2017. All rights reserved

Nexperia PHPT60410NY40 V, 10 A NPN high power bipolar transistor

PHPT60410NY All information provided in this document is subject to legal disclaimers.

Product data sheet 27 January 2015 2 / 15

5. Pinning informationTable 2. Pinning informationPin Symbol Description Simplified outline Graphic symbol

1 E emitter

2 E emitter

3 E emitter

4 B base

mb C collector

mb

1 2 3 4

LFPAK56; Power-SO8 (SOT669)

sym123

C

E

B

6. Ordering informationTable 3. Ordering information

PackageType number

Name Description Version

PHPT60410NY LFPAK56;Power-SO8

Plastic single-ended surface-mounted package (LFPAK56;Power-SO8); 4 leads

SOT669

7. MarkingTable 4. Marking codesType number Marking code

PHPT60410NY 0410NAB





8. Limiting valuesTable 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit

VCBO collector-base voltage open emitter - 40 V

VCEO collector-emitter voltage open base - 40 V

VEBO emitter-base voltage open collector - 7 V

IC collector current - 10 A

ICM peak collector current single pulse; tp ≤ 1 ms - 20 A

IB base current - 1 A

IBM peak base current single pulse; tp ≤ 1 ms - 2 A

[1] - 1.3 W

[2] - 3.3 W

[3] - 5 W

Ptot total power dissipation Tamb ≤ 25 °C

[4] - 25 W

Tj junction temperature - 175 °C

Tamb ambient temperature -55 175 °C

Tstg storage temperature -65 175 °C

[1] Device mounted on an FR4 Printed-Circuit Board (PCB); single-sided copper; tin-plated and standardfootprint.

[2] Device mounted on an FR4 PCB; single-sided copper; tin-plated and mounting pad for collector 6 cm2.[3] Device mounted on an ceramic PCB; Al2O3, standard footprint.[4] Power dissipation from junction to mounting base.





aaa-014224

2

4

6

Ptot(W)

0

(1)

(2)

(3)

Tamb (°C)-75 22512525

(1) Ceramic PCB, Al2O3, standard footprint

(2) FR4 PCB, mounting pad for collector 6 cm2

(3) FR4 PCB, standard footprint

Fig. 1. Power derating curves

9. Thermal characteristicsTable 6. Thermal characteristicsSymbol Parameter Conditions Min Typ Max Unit

[1] - - 115 K/W

[2] - - 45 K/W

Rth(j-a) thermal resistancefrom junction toambient

in free air

[3] - - 30 K/W

Rth(j-mb) thermal resistancefrom junction tomounting base

- - 6 K/W

[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated mounting pad for collector 6 cm2.[3] Device mounted on an ceramic Printed-Circuit Board (PCB), Al2O3, standard footprint.





aaa-014225

duty cycle = 10.75

0.2

0

0.5

0.10.05

0.010.02

0.25

0.33

10

1

102

103

Zth(j-a)(K/W)

10-110-5 1010-210-4 10210-1

tp (s)10-3 1031

FR4 PCB, standard footprint

Fig. 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical valuesaaa-014226

10-5 1010-210-4 10210-1tp (s)

10-3 1031

10

1

102

Zth(j-a)(K/W)

10-1

duty cycle = 10.75

0.50.33

0.2

0.1

0.050.02

0.010

0.25

FR4 PCB, mounting pad for collector 6 cm2

Fig. 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values

10. CharacteristicsTable 7. CharacteristicsSymbol Parameter Conditions Min Typ Max Unit

VCB = 32 V; IE = 0 A; Tamb = 25 °C - - 100 nAICBO collector-base cut-offcurrent VCB = 32 V; IE = 0 A; Tj = 150 °C - - 50 µA

ICES collector-emitter cut-offcurrent

VCE = 32 V; VBE = 0 V; Tamb = 25 °C - - 100 nA

IEBO emitter-base cut-offcurrent

VEB = 7 V; IC = 0 A; Tamb = 25 °C - - 100 nA

hFE DC current gain VCE = 2 V; IC = 500 mA; Tamb = 25 °C 230 370 -





Symbol Parameter Conditions Min Typ Max Unit

VCE = 2 V; IC = 1 A; tp ≤ 300 µs;δ ≤ 0.02; Tamb = 25 °C

220 360 -

VCE = 2 V; IC = 5 A; tp ≤ 300 µs;δ ≤ 0.02; Tamb = 25 °C

140 230 -

VCE = 2 V; IC = 10 A; tp ≤ 300 µs;δ ≤ 0.02; Tamb = 25 °C; pulsed

55 90 -

IC = 1 A; IB = 50 mA; tp ≤ 300 µs;δ ≤ 0.02; Tamb = 25 °C; pulsed

- 35 50 mV

IC = 5 A; IB = 500 mA; pulsed;tp ≤ 300 µs; δ ≤ 0.02; Tamb = 25 °C

- 140 200 mV

VCEsat collector-emittersaturation voltage


- 330 460 mV

RCEsat collector-emittersaturation resistance

IC = 10 A; IB = 1 A; pulsed; tp ≤ 300 µs;δ ≤ 0.02; Tamb = 25 °C

- 28 40 mΩ


- - 0.95 V


- - 1.2 V

VBEsat base-emitter saturationvoltage


- - 1.3 V

VBEon base-emitter turn-onvoltage

VCE = 2 V; IC = 500 mA; Tamb = 25 °C - - 0.8 V

td delay time - 15 - ns

tr rise time - 130 - ns

ton turn-on time - 145 - ns

ts storage time - 310 - ns

tf fall time - 95 - ns

toff turn-off time

VCC = 12.5 V; IC = 5 A; IBon = 250 mA;IBoff = -250 mA; Tamb = 25 °C

- 405 - ns

fT transition frequency VCE = 10 V; IC = 500 mA; f = 100 MHz;Tamb = 25 °C

- 128 - MHz

Cc collector capacitance VCB = 10 V; IE = 0 A; ie = 0 A;f = 1 MHz; Tamb = 25 °C

- 57 - pF





aaa-014213

200

400

600

hFE

0

IC (mA)10-1 1041031 10210

(1)

(3)

(2)

VCE = 2 V(1) Tamb = 100 °C(2) Tamb = 25 °C(3) Tamb = −55 °C

Fig. 4. DC current gain as a function of collectorcurrent; typical values

VCE (V)0 542 31

aaa-014214

8

4

12

16

IC(A)

0

15

IB = 5 mA

25

50

75100

125150175

10

Tamb = 25 °C

Fig. 5. Collector current as a function of collector-emitter voltage; typical values

aaa-014215

0.6

0.8

0.4

1.0

1.2VBE(V)

0.2

IC (mA)10-1 1041031 10210

1

2

3

VCE = 2 V(1) Tamb = −55 °C(2) Tamb = 25 °C(3) Tamb = 100 °C

Fig. 6. Base-emitter voltage as a function of collectorcurrent; typical values

aaa-014216

0.6

1

1.4

VBEsat(V)

0.2

IC (mA)10-1 1041031 10210

(1)

(2)

(3)

IC/IB = 20(1) Tamb = −55 °C(2) Tamb = 25 °C(3) Tamb = 100 °C

Fig. 7. Base-emitter saturation voltage as a function ofcollector current; typical values





aaa-015655

IC (mA)10-1 1041031 10210

10-1

1

VCEsat(V)

10-2

(3)

(1)

(2)

IC/IB = 20(1) Tamb = 100 °C(2) Tamb = 25 °C(3) Tamb = −55 °C

Fig. 8. Collector-emitter saturation voltage as afunction of collector current; typical values

aaa-014219

10-1

10-2

1

VCEsat(V)

10-3

IC (mA)10-1 1041031 10210

(1)

(2)

(3)

(4)

Tamb = 25 °C(1) IC/IB = 100(2) IC/IB = 50(3) IC/IB = 20(4) IC/IB = 10

Fig. 9. Collector-emitter saturation voltage as afunction of collector current; typical values

aaa-014220

IC (mA)10-1 1041031 10210

10-1

1

10

102

RCEsat(Ω)

10-2

(1)

(2)

(3)

IC/IB = 20(1) Tamb = 100 °C(2) Tamb = 25 °C(3) Tamb = −55 °C

Fig. 10. Collector-emitter saturation resistance as afunction of collector current; typical values

IC (mA)10-1 1041031 10210

aaa-014221

1

10-1

102

10

103

RCEsat(Ω)

10-2

(1)

(2)

(4)

(3)

Tamb = 25 °C(1) IC/IB = 100(2) IC/IB = 50(3) IC/IB = 20(4) IC/IB = 10

Fig. 11. Collector-emitter saturation resistance as afunction of collector current; typical values





11. Test information

006aaa003

IBon (100 %)

IB

input pulse(idealized waveform)

IBoff

90 %

10 %

IC (100 %)

IC

tdton

90 %

10 %

tr

output pulse(idealized waveform)

tf

t

tstoff

Fig. 12. BISS transistor switching time definition

RC

R2

R1

DUT

mlb826

Vo

RB(probe)450 Ω

(probe)450 Ω

oscilloscope oscilloscope

VBB

VI

VCC

Fig. 13. Test circuit for switching times

11.1 Quality informationThis product has been qualified in accordance with the Automotive Electronics Council(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and issuitable for use in automotive applications.





12. Package outline

ReferencesOutlineversion

Europeanprojection Issue date

IEC JEDEC JEITA

SOT669 MO-235

sot669_po

11-03-2513-02-27

Unit(1)

mmmaxnommin

1.20

1.01

0.15

0.000.25

0.50

0.35

4.41

3.62

2.2

2.0

6.2

5.8

0.85

0.40

A

Dimensions (mm are the original dimensions)

Note1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

Plastic single-ended surface-mounted package (LFPAK56; Power-SO8); 4 leads SOT669

A1 A2

1.10

0.95

A3 b b2 b3

0.1

L2 w y

8°

0°

θ

b4 c c2 D(1) D1(1) E(1) E1(1)

3.3

3.1

e

1.27

H L

0.25

0.19

0.30

0.24

4.20 1.3

0.80.25

0.9

0.7

4.10

3.80

5.0

4.8

1.3

0.8

L1

A C

1/2 e

w A

0 5 mm

scale

e

E1

b

c2

A2

1 2 3 4

mountingbase

D1

c

E

b2

b3

b4

H D

L2

L1

C

X

y C

q

(A3)

L

A

A1

detail X

Fig. 14. Package outline LFPAK56; Power-SO8 (SOT669)





13. Soldering

0.6(3×)

0.7(4×)

0.25(2×)

0.25(2×)

0.6(4×)

4.2

4.7

0.25(2×)

1.27

1.1

2

3.81

0.9(3×)

SP opening =Cu - 0.050

SR opening =Cu + 0.075

2.15

2.55

3.45 3.5

3.3

solder lands

solder resist occupied area

solder paste125 µm stencil

Dimensions in mm

SOT669Footprint information for reflow soldering

sot669_fr

Fig. 15. Reflow soldering footprint for LFPAK56; Power-SO8 (SOT669)





14. Revision historyTable 8. Revision historyData sheet ID Release date Data sheet status Change notice Supersedes

PHPT60410NY v.1 20150127 Product data sheet - -





15. Legal information

15.1 Data sheet statusDocumentstatus [1][2]

Productstatus [3]

Definition

Objective[short] datasheet

Development This document contains data fromthe objective specification for productdevelopment.

Preliminary[short] datasheet

Qualification This document contains data from thepreliminary specification.

Product[short] datasheet

Production This document contains the productspecification.

[1] Please consult the most recently issued document before initiating orcompleting a design.

[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.nexperia.com.

15.2 DefinitionsPreview — The document is a preview version only. The document is stillsubject to formal approval, which may result in modifications or additions.Nexperia does not give any representations or warranties as tothe accuracy or completeness of information included herein and shall haveno liability for the consequences of use of such information.

Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.

Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local Nexperiasales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenNexperia and its customer, unless Nexperia andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the Nexperia productis deemed to offer functions and qualities beyond those described in theProduct data sheet.

15.3 DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, Nexperia does not giveany representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for theconsequences of use of such information. Nexperia takes noresponsibility for the content in this document if provided by an informationsource outside of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.

Notwithstanding any damages that customer might incur for any reasonwhatsoever, Nexperia’s aggregate and cumulative liability towardscustomer for the products described herein shall be limited in accordancewith the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.

Suitability for use in automotive applications — This Nexperiaproduct has been qualified for use in automotiveapplications. Unless otherwise agreed in writing, the product is not designed,authorized or warranted to be suitable for use in life support, life-critical orsafety-critical systems or equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia and its suppliers accept no liability forinclusion and/or use of Nexperia products in such equipment orapplications and therefore such inclusion and/or use is at the customer's ownrisk.

Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.

Customers are responsible for the design and operation of theirapplications and products using Nexperia products, and Nexperiaaccepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the Nexperia product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.

Nexperia does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using Nexperiaproducts in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.

Terms and conditions of commercial sale — Nexperiaproducts are sold subject to the general terms and conditions of commercialsale, as published at http://www.nexperia.com/profile/terms, unless otherwiseagreed in a valid written individual agreement. In case an individualagreement is concluded only the terms and conditions of the respectiveagreement shall apply. Nexperia hereby expressly objects toapplying the customer’s general terms and conditions with regard to thepurchase of Nexperia products by customer.

http://www.nexperia.com/profile/terms





No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.

Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.

Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.

15.4 TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.





16. Contents1 General description ............................................... 12 Features and benefits ............................................13 Applications ........................................................... 14 Quick reference data ............................................. 15 Pinning information ...............................................26 Ordering information .............................................27 Marking ................................................................... 28 Limiting values .......................................................39 Thermal characteristics .........................................410 Characteristics .......................................................511 Test information ..................................................... 911.1 Quality information ............................................... 912 Package outline ................................................... 1013 Soldering .............................................................. 1114 Revision history ...................................................1215 Legal information .................................................1315.1 Data sheet status ............................................... 1315.2 Definitions ...........................................................1315.3 Disclaimers .........................................................1315.4 Trademarks ........................................................ 14

© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 27 January 2015