phpworld.2015 scaling magento

Scaling Magento – Mathew Beane - php[world] 2015

Scaling Magento Reaching Peak Performance

1

Mathew Beane @aepod

Director of Systems Engineering - RobofirmZend Z-Team Volunteer – Magento Division

Family member – 3 Kids and a WifeMagento Certified Developer



Magento: What is it?• Open-source e-commerce platform• PHP based application• Core utilizes Zend Framework 1• Very flexible, built to modify• Extremely scalable, supports huge stores• Market leader and still growing• Magento 2 is right around the corner• 2.0.0-rc2 is out now• http://magento.com/developers/magento2


Cluster Configuration Overviewhttps://github.com/aepod/magento-digitalocean-sandbox

• Uses Puppet to build out cluster• To setup the initial test checkout readme in

project• Initial release standard (n)webnodes + single db

config• Monolith server has Web, PHP, DB, Redis all-in-

one• We will come back to this later


Using the Magento Vagrant Puppet Sandbox

1) Install Vagrant

2) Install Digital Ocean provider

3) Grab the project source from github git clone https://github.com/aepod/Magento-Vagrant-Puppet-Sandbox.git

4) Add your Token to Vagrantfile

5) Ensure you have a ssh key

6) Stand up some boxesvagrant up puppet

* Add puppet IP from output to Vagrantfile

vagrant up monolith

Vagranthttps://www.vagrantup.com/

Digital Ocean Providerhttps://github.com/smdahlen/vagrant-digitalocean

Magento Vagrant Puppet Sandboxhttps://github.com/aepod/magento-digitalocean-sandbox

Scaling Magento - Todays Plan

• Introduction• Magento Application: Preparing and Optimizing• Magento Cluster Architecture: Examine Typical

Layouts• Magento Digital Ocean Sandbox: Demonstrating

Clustering• Magento Performance Toolkit: Measuring

Performance Benchmarks• Magento Digital Ocean Sandbox: Guided experiments• Conclusion: Open Q & A

Preparing and Optimizing

Before You Start Clustering

Optimized Server SettingsMagento application is optimized and cleanDevelopment pipeline in placeDeployment infrastructure is solidRigorous testing protocols are in place

Pre-Scaling Checklist


Optimizing Overview• Optimize sysctl.conf: Increase limits for the servers

• Modify Nginx settings: • Setup PHP FPM with TCP properly • Optimize Worker Connections• Tune up caching and other settings

• Optimize PHP FPM• Process Manager Optimization• APC / Zend Opcode Cache• Tune up other settings

• Optimize Redis

• Optimize MySQL

The goal is to optimize flow.


Optimizing Hints – Linux Kernel• Sysctl is an interface for configuring the Linux

Kernel.

• The following slides show some examples of the settings you may change in the sysctl.conf.

• Remember to backup your configurations.

• After changing you run: sysctl –p to update your kernel settings.

• Always test after changing values, quantify your results against previous tests.

See also: https://access.redhat.com/documentation/en-US/Red_Hat_Directory_Server/8.2/html/Performance_Tuning_Guide/system-tuning.html


Optimizing Hints – Linux Kernel# Controls the maximum shared segment size, in bytes (64gb)kernel.shmmax = 68719476736

# Controls the maximum number of shared memory segments, in pages (16gb)kernel.shmall = 4294967296

#controls the number of process identifers that can be createdkernel.pid_max = 2097152

# Number of open files handlesfs.file-max = 2097152

# Defaults to 65536 – Deals with malloc maps.vm.max_map_count = 262144

You can find a lot more tuning information by looking up the parameters and learning more about them.


Optimizing Hints – Linux Kernelnet.core.rmem_max = 16777216net.core.wmem_max = 16777216net.core.rmem_default = 1048576net.core.wmem_default = 1048576net.core.netdev_max_backlog = 65536net.core.somaxconn = 65536

net.ipv4.tcp_rmem = 4096 1048576 16777216net.ipv4.tcp_wmem = 4096 1048576 16777216net.ipv4.tcp_max_syn_backlog = 65536

net.core.somaxconn is the least trivial, and typically set very low causing the following: “apr_socket_recv: Connection reset by peer” and “connect() … failed“.

Queuing up packets efficiently, make sure you have enough space in your

buffers.


Optimizing Hints – Nginx location ~ \.php$ {

fastcgi_pass 127.0.0.1:9000;

fastcgi_index index.php;

fastcgi_param SCRIPT_FILENAME /var/www/html/$fastcgi_script_name;

fastcgi_param MAGE_IS_DEVELOPER_MODE 0;

fastcgi_param PHP_VALUE error_log=/var/log/php-errors.log;

include fastcgi_params;

fastcgi_cache off;

fastcgi_buffer_size 128k;

fastcgi_buffers 256 16k;

fastcgi_busy_buffers_size 256k;

fastcgi_temp_file_write_size 256k;

fastcgi_read_timeout 900s;

}


Optimizing Hints – Nginx Battle Hardened Magento Nginx Config: https://gist.github.com/gwillem/cd5ae6845fa33aa0d481

worker considerations:Worker Processes = Total # CPU CoresWorker Connections: ½ of ulimit –nMax Connections = worker processes * worker connectionsWorker_rlimit_nofile safe value = 2 * Max Connectionskeepalive_timeout mitigates overage by trading for latency

https://gist.github.com/gwillem/cd5ae6845fa33aa0d481


Optimizing Hints – Nginx # Media: images, icons, video, audio, HTC

location ~* \.(?:jpg|jpeg|gif|png|ico|cur|gz|svg|svgz|mp4|ogg|ogv|webm|htc)$ {

expires 1M;

access_log off;

add_header Cache-Control "public";

}

Set long expires dates on media assets.

Bonus: Use a CDN to offset all Media and CSS calls.


Optimizing Hints – Nginx curl -X GET -I www.idealphp.com:80/skin/frontend/rwd/default/images/logo.gif

HTTP/1.1 200 OK

Server: nginx/1.0.15

Date: Tue, 14 Apr 2015 17:56:32 GMT

Content-Type: image/gif

Content-Length: 2320

Last-Modified: Tue, 14 Apr 2015 00:30:08 GMT

X-Robots-Tag: noindex, nofollow, nosnippet, noarchive

Accept-Ranges: bytes

Cache-Control: max-age=31536000

Cache-control: public

Test your headers using curl or other tools


Optimizing Hints – PHP-FPM• PHP 5.4 - Minimum• PHP 5.5 – Great, better performance if you have compatibility• PHP 5.6/5.7 - Even Better, although not officially supported• PHP 7 / HHVM - No official support until Magento 2.

Magento 1 HHVM: https://gist.github.com/tegansnyder/96d1be1dd65852d3e576- Lots of work went into this by Tegan Snyder (@tegansnyder)- Thanks to Daniel Sloof (@daniel_sloof) for doing MUCH of the groundwork allowing this to work

• Use TCP instead of sockets• Test with Zend OpCache instead of APC• Turn off APC Stat/Zend Revalidate

apc.stat = 0

opcache.revalidate_freq=0


Optimizing Hints – PHP-FPMTune Process Manager• pm: ondemand• pm.max_children: about 6-8 per CPU *more later

• pm.max_requests: 10000 *php threads should die for garbage collection

• listen.backlog: set to 64000 (typically set to -1 or 128) Listen backlog is limited by net.ipv4.tcp_max_syn_backlog *only do after sytsctl.conf optimization


Optimizing Hints – PHP-FPMpm.max_children will limit the amount of memory php uses overall

• Calculate the memory a thread is using while under load:ps --no-headers -o "rss,cmd" -C php-fpm | awk '{ sum+=$1 } END { printf ("%d%s\n", sum/NR/1024,"M") }'

• Use the total amount of memory you want php to consume:pm.max_children = Total RAM dedicated to the web server / Max child process size

Based on this, you can set your max_children based on memory instead of the CPU metric used earlier. This will allow for more memory consumption in production environment. Be sure to test with higher values, more is not always better.

Further Reading: http://myshell.co.uk/index.php/adjusting-child-processes-for-php-fpm-nginx/


Optimizing Hints – Redis• Redis is the preferred cache for Magento• sysctl ulimit values affect the redis maxclients• Use three separate Redis instances with a single DB in each, on different ports• tcp-backlog can be increased, adjust sysctl somaxconn and tcp_max_syn_backlog• maxmemory can be set very low typically.

• Using Sentinel and twemproxy you can horizontally scale• Clustering redis to eliminate all single threaded bottlenecks and single points of failure• Requires orchestration, and Magento application changes

• Don’t forget to update Cm_Redis to newest version (Magento lags behind)

• At Rackspace or AWS: Use Object Rocket https://objectrocket.com/ for Redis SaaS


Optimizing Hints – MySQL• Turn off MySQL Query Caching – This is single threaded and not of use with

Magento (* Before MySQL 5.7)

• Innodb settings can be tweaked to consume more memory

Selected Sample Configuration Settings for a 32GB Dual Hex-Core Server

myisam_sort_buffer_size = 64Mkey_buffer_size = 256Mjoin_buffer_size = 4Mread_buffer_size = 4Mread_rnd_buffer_size = 4Msort_buffer_size = 8Mtable_open_cache = 8192thread_cache_size = 512

tmp_table_size = 384Mmax_heap_table_size = 384Mmax_allowed_packet = 1024M

query_cache_type=0query_cache_size=0

innodb_thread_concurrency = 24innodb_buffer_pool_size = 16Ginnodb_log_file_size = 384Minnodb_log_buffer_size=24Minnodb_additional_mem_pool_size = 16Minnodb_io_capacity = 800innodb_concurrency_tickets = 900innodb_flush_neighbor_pages=continnodb_lock_wait_timeout=75innodb_flush_method=O_DIRECT


Optimizing Hints – MySQL• Clustering MySQL for Magento Requires all tables to be converted to InnoDB

• catalog_full_text_search requires MyISAM, unless your running MySQL 5.7

• When clustering always use identical hardware for each server

• Master/Master is not supported by Magento

• You can specify read servers and even load balance them

• It is unusual for Magento to require a true MySQL Cluster, as it is typically not the bottleneck


Optimizing Hints – Other• Varnish is great, however your application must be suitable• Adding Varnish to a slow site is like putting a bandage on a neck wound• Varnish complicates logging and request tracking throughout the application

• Lesti_FPC is a good redis ready FPC for Community Edition.• https://gordonlesti.com/projects/lestifpc/

• CDNs can have a great impact on end-user performance• Reduction in requests is also beneficial to the web server• Typically one of the cheapest/best moves to make

• Always test any changes you make


What You Don’t Want To Scale

A very good un-cached response, good ready to scale.

A typical bad response, scaling this will only cause you heartache.


Magento – Apply Security Patches• DOUBLE CHECK YOUR PATCHES:• https://www.magereport.com/

• Triple check your patches:• Patch Grid: https://goo.gl/X6iu8O by @knowj

https://goo.gl/X6iu8O

https://goo.gl/X6iu8O


Magento – “Clean Core”Keep a clean core. If you inherit a project, one of the first things you should do is clean up core. This means you have not changed any default files including templates, layouts and code.

Ben Marks, Magento Community Evangelist @benmarks(Protector of the Core)


How to Keep Core Clean

Source: https://joind.in/talk/view/16204

• Magento allows class overrides on nearly everything.

• Magento’s Event/Observer mechanism is pre-built into most business logic. You can add more if you need.

• Designs/Templates have a fallback system that allows you to utilize any of the core layouts and templates, or replace them in your current design.

• Untouched index.php. Outside of development and very rare implementations you should not “need” to edit this.


Magento Project Mess Detector• Find and eliminate your core changes with:

https://github.com/AOEpeople/mpmdMagento Project Mess Detector by Fabrizio Branca


Refactoring Bad Magento Projects – Further Study

Fabrizio Branca’s work on cleaning up Magento projects:http://fbrnc.net/blog/2014/12/magento-updateIn this article he goes into depth on the process of separating the core files, and using Modman and composer to package everything.

Tegan Snyder's work on building modman configurations for extensions out of existing source:https://github.com/tegansnyder/meffThis will allow you to generate modman files for your extensions which is handy in the process of cleaning up.


Optimizing Your Application with Zend Z-Ray

• Use Z-Ray to profile and tune your Magento Application

• Z-Ray allows you to see every request, and many details about the request.

• It’s easy to install, free to try and really amazing.

• It can be used to debug Mobile browsers through the Zend Server backend

• Z-Ray No longer requires Zend Server: http://www.zend.com/en/products/z-ray/z-ray-preview


Optimizing Your Application with Zend Z-Ray

Demo: http://serverdemo.zend.com/magento/Blog Article: http://aepod.com/debug-magento-using-zend-zray/

http://aepod.com/debug-magento-using-zend-zray/


Development Cycle• Should apply equally to

the hardware architecture as to the software application.

• Every project should have a continuous development cycle in place, and ensure that it is well documented and easy to follow for all of the people involved.


Development Cycle - SimplifiedDesign: Plan our your sprint, stick to Agile.

Develop: Toward a release on a schedule• Test: Build PHPUnit and Selenium tests into your process• Code Review: Pull requests and code review EVERYTHING.• User Acceptance Tests: Make sure the client is happy first.

Deploy: Package, test and deploy.• Deployments: Automate, and make the production servers hands

off.


Development Cycle – Agile / Scrum• Goal based system that encourages teamwork.• Daily communications with all involved in project.• Flexible and focused on delivery.• Encourages Teamwork and Accountability.


Development Cycle – Branching• Keep a clean core• Never edit core files. Ensure that you can see any core changes

in production.

• Release / Feature Branching• Choose a branching methodology and build around it.

• Use Pull Request• Code review increases the quality of your code. Make pull

requests part of your workflow.


Successful Git Branching Model

http://nvie.com/posts/a-successful-git-branching-model/

• Use Tagging as you release to master

• Types of branches:• Master: Tagged versions, what's on

production.

• Develop: What will be merged into master with the next release.

• Release: Preparing for release. Allows for last minute fixes, testing and prepping.

• Feature: Usually checked out by developers to work on features.

• Hotfix: Fixes aimed for unplanned production releases.


Development Cycle – TestingBuild testing into all of your development cycles.Developers are working on testing with Magento 1

BDD: https://speakerdeck.com/alistairstead/bdd-with-magentoBeHat: https://github.com/MageTest/BehatMagePHPSpec: https://github.com/MageTest/MageSpec

Magento 2 has a built in Test Automation Framework ( PHPUnit,Selenium )

https://wiki.magento.com/display/MAGE2DOC/Magento+Automated+Testing+Guide https://github.com/magento/taf

https://alankent.wordpress.com/2014/06/28/magento-2-test-automation/


Do Not Edit on Production• Use a deployment tool, and LOCK

DOWN production. No one should ever have to touch an application file manually for any reason.

• If you can extend this practice to your OS and server stack you now have fully engaged DevOps.


Development Cycle – Testing (Example of Fail)

After introducing SOLR indexing, testing showed serious issues as it

indexed.


Development Cycle – Application Packaging

• You must be able to package your application in order to deploy it to a cluster.• Deployment infrastructure may determine what packaging you

will need to use, for instance one of the following:• Zend Server offers Application Packaging and Deployment• A simple “golden copy” (tgz or flat) that is pushed to web nodes.• RPM or other proprietary packaging tool.

• Use Composer and/or modman to help maintain your application packages.

• Composer can even be used to install Magento Core• Make sure your build process is repeatable and testable.


Deployment Tools – Typical Software• When deploying an application to a cluster of

application servers, a deployment tool is a requirement.

• There are many choice, here are a couple typical deployment tools.

• Capistrano: Written in Ruby but well accepted and great to work with

• Jenkins: Another example of Deployment Automation

• Bamboo: Part of the Atlassian stack also includes testing and other features.

• Roll Your Own: This is more common, using bash scripts and other tools you can build a project deployment tool fairly easily.


Deployment Tools – Some Requirements• Integrated with code versioning• Supports Multi-Server• Supports the Application• Handles Maintenance Mode automatically• Runs Installers• Clears Caches

• Low Downtime• Rollback Procedure (a/b switch)• Trigger events such as shell scripts, or CDN clearing

• Nice to have – May not be required• Integrated testing• Packaging• Integration to GUI Interfaces

Deploying applications manually is a lot of work.


Deployment Tools – Further StudyI highly suggest researching Fabrizio Branca’s work on the subject: http://www.slideshare.net/aoepeople/rock-solid-magento Fabrizio has a ton of articles and slideshares on the subject.

Also check out Joshua Warren’s slides, he has several really informative presentations on the subject.http://www.slideshare.net/joshuaswarren/


Deployment Tools - Server Deployments• Automate server deployments:• Puppet• Chef• Ansible• Salt

• Centralize configurations• Automated updates and server onlining process• Take out the human factor!


Load Testing and Metrics"Don't rate potential over performance."

- Jim Fassel

Blaze MeterUsing Blazemeter you can easily build repeatable tests, with very nice graphs.(based on JMeter)

Gatlinghttp://gatling.io/On par with Blazemeter.

JMeterVery effective, without having to purchase a SaaS

SiegeCan be used minimally to simulate some types of load.

http://gatling.io/


Magento Performance Toolkithttps://github.com/magento/magento-performance-toolkit

The Magento Performance Toolkit is a set of automated tools that enables you to quickly and consistently measure the application performance of Magento using Apache JMeter. The toolkit includes(sic requires), a PHP script for generating a test database and a JMX script for the performance measurement.From: Magento Performance Toolkit Users Guide

More Reading: http://aepod.com/using-the-magento-performance-toolkit/


JMeter Tests for “Normal Sites”The Magento Performance Toolkit can be crafted to pull data from production sites, although its complicated and you may want to cover your site using your own JMeter tests.

Gathering the steps for a client site typically takes a day or more depending on the complexity of the site design, and the checkout.

Developing and debugging this can be a real time sink depending on how far down the rabbit hole you want to go.


Using Siegesiege –t 5M –b –c 5 http://www.idealphp.com/

This will start up 5 threads and hammer the URL for 5 minutes.

Siege is very useful, but limited. It’s easy to put a lot of traffic on a box with it, but the traffic will be limited to GET requests.

You can pull a list of URL’s from the Magento sitemap and run through random requests, this can even be used to do some pseudo-warming of the cache.


New Relic - Introduction• Analyze software in Real-time• Collect Data• Application Data• Server Data• Browser Data• Magento Data *

• Synthetics provides NrSQL• Alerts

* Magento data provided via Magento Extension: http://www.magentocommerce.com/magento-connect/new-relic-reporting-29133.html


New Relic – Production


New Relic - Testing


Load Testing Production1. Prepare a downtime:

Forward site to a non-magento maintenance page Exclude Testing IP – So tests can still proceedDisable Cron

2. Copy Production Database3. Point Magento at the new copied DB4. Modify Magento Admin Settings in copied DB

Use Test Payment GatewayDisable Transaction Emails

5. Test against Copied DB6. After Testing is complete:

Point site at original DBPut site back up on liveEnable Cron

Using this method, you can test against production on production. You will need to bring the site down during the time period, but if this is done at a low point in traffic it causes little to no stress to the

customers.




Next Up: Discussion about typical cluster architecture and components

Magento Cluster Architecture


Magento Cluster Architecture – Typical Layout

• Load Balanced – Front End Webservers• Admin / Backend Server Separated• Single MySQL Database Master, with Slaves


Magento Cluster Architecture - Components

Web Servers• Apache / Nginx• PHP 5.4 + (depends on Magento Version)• Multiple Webservers – Easy to cluster• Varnish Can be used as a Reverse Proxy• Nexcess Turpentine is the standard Magento Extension• Magento2 has Varnish support out of the box



Database• MySQL / Percona

• Master / Slave• Slaves are typically used for reporting or

Hotswap for failure• Can be set to read servers for application, but

it requires some work

• Solr / Elastic Search• Typically run on the Database or Backend

Server• Can power Search or other Magento business

logic



Other Components• File Server• NFS – This is by far the most common• NAS – Can be used on high end clients

• Redis / Memcache• Deployment Tools• Monitoring• ELK – Log aggregation across servers• Puppet / Chef


Magento Cluster Architecture - Bottlenecks

Breaking Points, where you need to adjust first.1.PHP – More web nodes, easy to do and very performant.2.Filesystem – Use a CDN to offset static asset traffic.3.Redis – Cluster Redis using sentinel/nutcracker.4.Database – Look at read server clustering

At some point adding Varnish should be considered as well. Varnish requires a clean application with some thought as to which blocks can be loaded dynamically via AJAX.


Scaling Implementation – A Scoring System

Concern Score (1-5)What is the simplicity of the solution?How difficult is it to support?Is it extensible, how broadly does it apply?Will it break often?How easy is it to update?Is it Expensive?

Concern Yes / NoDoes it require specialized services? (os level services, not typically installed)Does it require Magento application changes?Does it create a single point of failure? Yes = 5 Points, No = 0


Scaling – Web Server Concerns• Simple to Load Balance, most sites start here

• Challenges include the following:• Session Management: should be a no brainer if your using redis for

sessions• Shared file System: Use NFS for media, keep all code local to web servers• Fencing: easily solved with either software or hardware• Log Collection: ELK, Rsyslog or Splunk

• Keep the system builds simple, repeatable and automate if possible


Scaling – Web Server Concerns (Automation)

How to automate: Create an complete image to work from - include puppet so it can pull from a

puppet master The puppet master spins up your webserver stack You have your deployment process in place, so deploy the application and

spin up the node

Things of Note:• Be prepared to lose nodes, the more you have the more likely failure is• When a node runs amok, you must be prepared to kill it dead• Webservers typically wont fail, and fencing is more of an issue with db/redis.


Scaling - File systemsBest practice for sharing files: Use NFS• Most other options are not viable. (glusterfs, iscsi, and so on)• NFS will not be the bottleneck if your application is configured correctly• Share only media/ to avoid bottlenecks• Client requirements may drive cluster toward a NAS

Network Attached Storage (NAS)• Typically only on very large sites• Expensive but very reliable and robust• Entry level has very high bar (typically 20+ drives)


Scaling – File Systems and Symbolic Links• Share specific folders via symbolic links• Maintaining these when deploying is easy, just remake symbolic links or

copy them• Mount /var/magento/shared/[directory] via NFS, typically served from

backend server• Example: [docroot]/media -> /var/magento/shared/media

• Can also be used for local content• Not mounted via NFS, writes local var files for this server only• Example: [docroot]/var -> /var/media/local/var


Scaling – Redis Clustering“Redis clustering using sentinel is easy to set up. Adding twemproxy allows for a highly scalable Redis cluster and you get auto fail over and a ton of other benefits with this configuration. This arrangement can also remove your Redis single point of failure.”http://aepod.com/clustering-magento-redis-caching-with-sentinel-keepalived-twemproxy-and-twemproxy-agent/

• Easy to setup… well not really• Very Complex, requires orchestration• Sentinel Monitors Redis clusters• twemproxy handles sharding• twemproxy agent monitors sentinel• Very robust when setup, nothing is

single threaded, everything is HA and the speed….

• Can be transparent to Magento despite the complexity


Redis (Sentinel / twemproxy)Requires several layers of applications• Load Balancer: Load balances redis traffic to the twemproxy servers

• Twemproxy: proxy server, typically setup as a cluster of 2 servers (can be mixed on other servers)

• Nutcracker Agent: Connects twemproxy to sentinel to keep track of shards of servers

• Sentinel: Monitors the redis instances and maintains availability

• Redis: Dozens of redis servers, sharded, maintained and fenced by Sentinel and nutcracker

• VERY Complex


Scaling - MySQL• Should be considered a low value target, except for High Availability concerns

because Magento typically is not bottlenecked by MySQL

• Using Percona XtraDB you can add read slaves

• Magento only supports a single Master/Write server, with multiple read servers

• Setting up load balanced READ db servers is not overly difficult, but doesn’t offer much if any performance benefits

• Cluster DB will require more advanced fencing

• Typical production sites do not use load balanced or clustered MySQL


Database Servers (Percona)• Percona XtraDB to cluster MySQL• Percona XtraBackup for duplicating and rebuilding nodes• Percona Toolkit to help debug any issues your running into• Difficult to scale Write Servers• Scale out your read servers as needed, but MySQL reads are rarely the

bottleneck• Typically Slave server is used for backup and hot swap, NOT clustering.

A couple quick tips:• Not all tables in Magento are InnoDB, converting the MyISAM and Memory tables is OK• You will need to be able to kill read servers and refresh them. (Percona XtraBackup)• Use your Master server as a read server in the load balancer pool, when you kill all your read servers, it can

fall back to master.


Magento Cluster Architecture – Additional Tools

Load Balancer Components• Hardware Load Balancer• HAProxy Software Load Balancer

Database Components • Sentinel / Nutcracker• Percona XtraDB Tools• Clusterix or ScaleARC for High End


Load Balancers – Software / HAProxy

• HAProxy: a free fast and reliable solution featuring high availability, load balancing and proxy for TCP and HTTP-based applications.

• HAProxy can be used for web servers, database servers, Redis and any other TCP based application.

• Easy to configure using a puppet module• Can be clustered easily for high availability concerns• Handles L4 Load Balancing if you want to do fancy multi-application

environments• Built in stats interface

SOFTWARE


Hardware Load Balancers• F5 Hardware load balancers are a

standard• Brocade is another common brand• Rackspace offers a very easy to use

web interface to maintain a hybrid infrastructure

• Hardware load balancers offer a turn-key mature solution.

• Typically Managed Service, with very hands off approach. HYBRIDHybrid Load Balancers

• AWS Elastic Load Balancers• Rackspace Cloud Load Balancers• Cloudflare• Many others…

Load Balancers – Hardware & Hybrid


Load Balancers – Making a choice

• Budget concerns will drive this decision• Hosting Choices will affect availability, costs and toolsets• Start locally with HAProxy and build test clusters using

vagrant• HAProxy can still be used, even with a hardware load

balancer in place.


Scaling - Others• Reverse Proxy: Varnish or Nginx you can and should cluster these

• Puppet likes to be clustered: Mastering Puppet by Thomas Uphill is a great reference

• Monitoring Tools: You’re running these single threaded, what if the monitoring server fails?

• Warehouse Integrations, ERP Layer Stuff, everything may need to be multi-threaded

• Search back ends such as solr or elasticsearch

• Consider all of the parts of the business that surrounds the Magento Application and try to encapsulate them


Reverse Proxy (Varnish) Scaling ConcernsTurpentine is the standard go to extension for Magento to tie to Varnish• Handles ESI• Handles Dealing with updating VCL• http://www.magentocommerce.com/magento-connect/turpentine-varnish-

cache.html

• Varnish will replace your FPC, toggle it FPC off if you are using varnish• https://github.com/nexcess/magento-turpentine/wiki/Installation• Typically Varnish will run on each render box, and proxy to the local nginx.• Issues will typically show up as over caching of blocks or other bits of front

end page• SSL is NOT supported by varnish, terminate it at your load balancer


Reverse Proxy (Nginx) Scaling Concerns• NGINX is a great reverse proxy and load balancer

• http://nginx.com/resources/admin-guide/reverse-proxy/

• Can be used to effectively buffer and split requests to different cluster servers


Auto-Scaling Strategy• Insert puzzle building analogy joke here: http://www.wikihow.com/Assemble-

Jigsaw-Puzzles

• Each hosting environment has its own quirks and add on top of that the business logic requirements you will almost always have a unique infrastructure for every client

• Build small pieces and work them into the larger picture, you can get a lot of performance with a few minor changes.

• Test everything you do, keep detailed notes on the configurations and compare against the previous tests

Magento Performance Toolkit


Magento Performance Toolkithttps://github.com/magento/magento-performance-toolkit

The Magento Performance Toolkit is a set of automated tools that enables you to quickly and consistently measure the application performance of Magento using Apache JMeter. The toolkit includes(sic requires), a PHP script for generating a test database and a JMX script for the performance measurement.From: Magento Performance Toolkit Users Guide

More Reading: http://aepod.com/using-the-magento-performance-toolkit/

Magento CE 1.9.1.0 Ready Version: https://github.com/aepod/magento-performance-toolkit


Magento Performance Toolkit – generate.php• Importing can take a long time, and may

require changes to php and MySQL settings

• If it fails, it fails hard. Restart with a fresh DB

• You can modify the profiles to better suite your testing requirements

• Using the toolkit requires putting it in the dev/tools/performance_toolkit/ directory in the Magento install you want to use it on

• The scripts requires this exact directory, due to includes and autoloading

• Oftentimes will require you to remove the tmp dir inside the toolkit


Magento Performance Toolkit – Generate Profiles

• You can create your own profiles by copying and modifying the XML in profiles/

• Large and X-Large take extremely long times to import and require changes to the PHP and MySQL settings and it still likes to fail hard.

• After it completes import, double check the following• Front end still up and running and shows the framework

categories• Admin and Frontend logs in correctly• Indexes and Caches rebuild correctly


Magento Performance Toolkit – jMeter GUIModify the tests, learn how they work and dig into errors you may be having running

them.

jMeter GUI• Easy to use• Much easier than editing

XML for the tests.• Debugging requirement• Load/Save XML• Tends to crash

when on windows


Magento Performance Toolkit – JMeter Configuration

./jmeter -n -t ~/benchmark-default.jmx -Jhost=www.idealphp.com -Jbase_path=/ -Jusers=30 -Jramp_period=30 -Jreport_save_path=./ -Jloops=2000 -Jadmin_user="admin" -Jadmin_password=“adminpass";

• Host: host to check against• Base Path: for building the url• User: Roughly the # of threads (more on next slid)• Ramp Period: How long to take starting up• Report Save Path: Where it saves the summary• Loops: How many times it will try to loop through (except if it runs out of

customers)• Admin User/Pass: The admin user and pass for the admin site.• This is expected to be at http://www.idealphp.com/admin/

• Any JMeter Attribute from top level can be set from command line using –Jattribute=


Magento Performance Toolkit – JMeter Test Results


Magento Performance Toolkit –Users Demystified

The JMeter tests use 4 thread groups to accommodate the testing.

• Category Product Browsing(30%): Opens the homepage, goes to a category, opens up 2 simple products and then a configurable.

• View Product Add To Cart(62%): Same as Category browsing however it adds each of the items to the cart in addition to viewing them.

• Guest Checkout (4%): Same as View/Add to Cart, in addition it runs through the checkout as a guest user.

• Customer Checkout (4%): Same as View/Add to Cart, in addition it runs through the checkout as a logged in customer.

Thread groups create threads based on the number of users and the above percentages(by default).

users * group_percent / 100

• This result is rounded down, and can be 0 for checkouts, making no checkout threads.

• You can set EACH group independently, and they do not need to add up to 100% or less in totality.


Magento Performance Toolkit – More AttributesAny JMeter Attribute from top level can be set from command line using –Jattribute=

Customer and Admin Password must match what was used during the generate.

Orders are tricky and used to calculate “users” which are used within the thread groups.See jmeter test setup Thread Group -> validate properties and count users


Magento Performance Toolkit –JMeter Test PlanSetup Thread Groups

1. Extracts Categories from Top Menu2. Searches for Simple Products, builds list3. Searches for Config Products, builds list4. Logs in on the Admin5. Grabs a list of customers from the customer

grid6. Builds users count which is used by the

threads.

Loops through Each Thread Group7. Category Product Browsing8. Product Browsing and add items to cart9. Guest Checkout10.Customer Checkout

Teardown11.Just removes some stats, but you could

extend this spot for some killer stats.

jMeter test, building the current test. Notice it takes quite a few requests to get started.

jMeter tests running, you can see the “customer count” decrementing as it runs through the tests.


Using Newrelic During JMeter tests


Magento Online Customers


Magento Performance Toolkit – Maxed Orders./jmeter -n -t ~/benchmark-default.jmx -Jhost=www.idealphp.com -Jbase_path=/ -Jusers=10 \

-Jramp_period=30 -Jreport_save_path=./ -Jloops=2000 -Jadmin_password="5678password" \

-Jadmin_user=admin -Jview_product_add_to_cart_percent=0 -Jview_catalog_percent=0 \

-Jcustomer_checkout_percent=0 -Jguest_checkout_percent=100

(This can be done in the JMX as well)

Non-Trivial Settings:View Catalog : 0%View Product Add to Cart : 0%Customer Checkout: 0%Guest Checkout: 100%

This test will slam orders through as fast as it can. Using it is as simple as recording the number of orders at the start and finish of a test, and then calculating the number of orders per hour on that.

Orders Per Hour = (3600 / Time to Complete) * (Ending Orders – Starting Orders)


Magento Performance Toolkit – In ProductionTo use the Magento Performance Toolkit on a existing built out production website:1.Follow the testing on a production site plan from earlier.2.Ensure your top-menu matches the JMeter tests search for top_menu, you can switch the jmeter test or try to modify the template to match.3.Modify the generate script to not create categories4.Generate your data5.Run your tests

Other Issues:Not a trivial issue, it will take some time to setup.Checkout and cart parts probably will fail and require changes to testsNot the cleanest methodology, but it does work if you make the effort


Magento Performance Toolkit – Benchmarking• Find metrics to base any decisions you make, and quantify the results• 30 Threads per web head is a good spot to start (except in the VM)• Orders Per Hour

• Collect test start and end orders• (end orders – start orders) * (3600 / time to complete)

• Customers Per Day• (86400 / time to complete) * Online Customers


Magento Performance Toolkit – Benchmarking• Max Response Time: Should stay below 10 seconds in a good

test• Average Response Time: Should be below 500ms in a good test• Error Rate: 0.00% is what your looking for, some glitches may

happen• Collect New Relic Stats or other stats and use them to

supplement the tests

Clustering DemoMagento Digital Ocean Sandbox


Using the Magento Vagrant Puppet Sandbox

1) Install Vagrant

2) Install Digital Ocean provider

3) Grab the project source from github git clone https://github.com/aepod/magento-digitalocean-sandbox

4) Add your Token to Vagrantfile

5) Ensure you have a ssh key

6) Stand up some boxesvagrant up puppet

* Add puppet IP from output to Vagrantfile

vagrant up monolith

Vagranthttps://www.vagrantup.com/

Digital Ocean Providerhttps://github.com/smdahlen/vagrant-digitalocean

Magento Vagrant Puppet Sandboxhttps://github.com/aepod/magento-digitalocean-sandbox


Adding Digital Ocean API Token1) Navigate to API -> Tokens -> Generate

2) Copy token that is generated

3) Add Token to Vagrantfile


Windows Git / Rsync / SSH Key1. Install git: https://git-scm.com/download/win2. Install Rsync:

http://sourceforge.net/projects/backuppc/files/cygwin-rsyncd/3.0.9.0/3. Double check git is in path: C:\Program Files (x86)\Git\bin4. Add c:\rsyncd\bin\ to your path5. Run ssh-keygen

https://git-scm.com/download/win

https://git-scm.com/download/win

http://sourceforge.net/projects/backuppc/files/cygwin-rsyncd/3.0.9.0/


Using the Magento Sandbox - NewrelicNewrelic has provided the following signup: http://newrelic.com/robofirm/ Free 30 day lite account

• Add your newrelic key to the Vagrantfile

• Puppet will handle the rest, you will see test results in New Relic


Sandbox – Stand Up• All nodes run Centos 6.5 and have firewalls disabled (NOT SECURED)• Puppet does a lot of the base system configuration• Some shell scripting triggered from vagrant happens before/after puppet.

Available cluster nodes:

• Puppet: All other boxes require it to stand up.• Monolith: Fully functional single webserver• DB: MySQL(Percona), Redis and Shared Filesystem(NFS)• Web: The public facing haproxy server.• Render[1-4]: Nginx, PHP-fpm. These can be added/removed and scaled.• jMeter: Used for testing, simple java enabled box.


Sandbox – vagrant up (puppet)1. vagrant up puppet

Some time later…. After a wall of text.


Sandbox – vagrant up (monolith)1. Add puppet IP from output to Vagrantfile2. vagrant up monolith

Some time later…. After another wall of text.


Config - Switching Hosts (monolith)To use the tests locally you need to “poison your DNS”

On Mac: /private/etc/hostshttp://www.tekrevue.com/tip/edit-hosts-file-mac-os-x/

On Windows: c:\windows\System32\drivers\etc\hostshttp://www.thewindowsclub.com/hosts-file-in-windows

Add the following for monolith:192.168.200.21 web www.idealphp.com


Sandbox – vagrant up (jmeter)1. vagrant up jmeter

A short time later…. After yet another wall of text.


Test -Monolith1. Login on JMeter box2. Add Monolith IP to the hosts file on jmeter3. Switch to the jmeter directory:

cd /usr/local/apache-jmeter-2.13/bin/

./jmeter -n -t ../tests/benchmark-small.jmx -Jhost=www.idealphp.com

DON’T FORGET TO NOTE THE RESULTS


Sandbox – vagrant up (cluster)1. vagrant up puppet2. Add puppet IP from output to Vagrantfile3. Vagrant up db4. Vagrant up web5. Vagrant up render1 *

* render2,render3,render4 can also be brought up at anytime.


Config – Switching Hosts (cluster/web)Remove or change the entry for monolith

On Mac: /private/etc/hostsOn Windows: c:\windows\System32\drivers\etc\hosts

Change the hosts on the JMeter box, in /etc/hosts

Modify the hosts file:192.168.200.12 web www.idealphp.com


Test – Cluster (1 web)Repeat Tests:


Note Results


Config – Add a Web NodeVagrant up render2

Note Results in haproxy stats: http://www.idealphp.com/haproxy?stats




Note Results

Break Q/A


Config – Add a Web NodeVagrant up render3





Note Results

You can start to experiment with more threads if you wish.


Config – Add Another Web NodeVagrant up render4




./jmeter -n -t ../tests/benchmark-small.jmx -Jhost=www.idealphp.com -Jramp_period=30

Note Results

Try more threads


Results – What does it all mean?We are testing on small cloud servers, the results will not be good.

Doing some compare between the setups you should see throughput going up as you add boxes.

In production you will start to find bottlenecks easily using this method


Test – Cluster (Max Orders)./jmeter -n -t ../tests/benchmark.jmx -Jhost=www.idealphp.com -Jbase_path=/ -Jusers=10 \

-Jramp_period=30 -Jreport_save_path=./ -Jloops=2000 -Jadmin_password="5678password" \

-Jadmin_user=admin -Jview_product_add_to_cart_percent=0 -Jview_catalog_percent=0 \

-Jcustomer_checkout_percent=0 -Jguest_checkout_percent=100

This test will slam orders through as fast as it can. Using it is as simple as recording the number of orders at the start and finish of a test, and then calculating the number of orders per hour on that.

Orders Per Hour = (3600 / Time to Complete) * (Ending Orders – Starting Orders)

Try against less web nodes and compare results


Config – PHP FPM TuningAdjust /etc/php-fpm.d/www.conf change max_children from 8 to 16

Edit on puppet /etc/puppet/modules/daemons/manifests/nginx/php.ppLine 42: Change to 16Run on web: /root/deploy_application.sh

Retest with original 4 server test:./jmeter -n -t ../tests/benchmark-small.jmx -Jhost=www.idealphp.com -Jramp_period=30

Magento Vagrant Puppet Sandbox

Questions / Feedback

Thank You! Mathew Beane <[email protected]> Twitter: @aepod Blog: http://aepod.com/

Rate this talk:http://joind.in/talk/view/15501

(Slides will be available)

Thanks to :My Family

The Magento CommunityRobofirm

Fabrizo Branca (deployments)Thjis Feryn (sentinel)Ben Rose (puppet)

Digital OceanNew Relic

Zend and the PHP Community

http://aepod.com/


Logo graphics:http://payload.cargocollective.com/1/3/107799/1402304/Puppet%20Hand.jpeg

http://images.clipartpanda.com/sandbox-clipart-black-and-white-lemmling_sandbox_black_white_line_art_scalable_vector_graphics_svg_clip_art.svg

Digital Ocean and Magento Logo

http://payload.cargocollective.com/1/3/107799/1402304/Puppet%20Hand.jpeg

http://payload.cargocollective.com/1/3/107799/1402304/Puppet%20Hand.jpeg




phpworld.2015 scaling magento

Internet