pic32mz embedded connectivity (ec) starter kit user’s...

32
2013 Microchip Technology Inc. DS70005147A PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

Upload: buiphuc

Post on 20-Mar-2018

228 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

2013 Microchip Technology Inc. DS70005147A

PIC32MZ EmbeddedConnectivity (EC) Starter Kit

User’s Guide

Page 2: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

DS70005147A-page 2 2013 Microchip Technology Inc.

Information contained in this publication regarding deviceapplications and the like is provided only for your convenienceand may be superseded by updates. It is your responsibility toensure that your application meets with your specifications.MICROCHIP MAKES NO REPRESENTATIONS ORWARRANTIES OF ANY KIND WHETHER EXPRESS ORIMPLIED, WRITTEN OR ORAL, STATUTORY OROTHERWISE, RELATED TO THE INFORMATION,INCLUDING BUT NOT LIMITED TO ITS CONDITION,QUALITY, PERFORMANCE, MERCHANTABILITY ORFITNESS FOR PURPOSE. Microchip disclaims all liabilityarising from this information and its use. Use of Microchipdevices in life support and/or safety applications is entirely atthe buyer’s risk, and the buyer agrees to defend, indemnify andhold harmless Microchip from any and all damages, claims,suits, or expenses resulting from such use. No licenses areconveyed, implicitly or otherwise, under any Microchipintellectual property rights.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of ourproducts. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such actsallow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.

QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV

== ISO/TS 16949 ==

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.

Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries.

All other trademarks mentioned herein are property of their respective companies.

© 2013, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.

Printed on recycled paper.

ISBN: 978-1-62077-646-9

Page 3: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ EMBEDDEDCONNECTIVITY (EC)

STARTER KIT USER’S GUIDE

Table of Contents

Preface ........................................................................................................................... 5

Chapter 1. Introduction1.1 Kit Contents .................................................................................................. 111.2 Starter Kit Functionality and Features .......................................................... 12

Chapter 2. Hardware2.1 Hardware Features ....................................................................................... 15

Appendix A. Board Layout and SchematicsA.1 Block Diagram .............................................................................................. 19A.2 Board Layout ................................................................................................ 20A.3 Schematics .................................................................................................. 22

Appendix B. Bill of Materials....................................................................................... 26

Worldwide Sales and Service .................................................................................... 32

2013 Microchip Technology Inc. DS70005147A-page 3

Page 4: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

NOTES:

DS70005147A-page 4 2013 Microchip Technology Inc.

Page 5: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ EMBEDDEDCONNECTIVITY (EC)

STARTER KIT USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the PIC32MZ Embedded Connectivity (EC) Starter Kit. Items discussed in this chapter include:

• Document Layout• Conventions Used in this Guide• Recommended Reading• The Microchip Web Site• Development Systems Customer Change Notification Service• Customer Support• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the PIC32MZ Embedded Connectivity (EC) Starter Kit (also referred to as “starter kit”) as a development tool to emulate and debug firmware on a target board. This user’s guide is composed of the following chapters:

• Chapter 1. “Introduction” provides a brief overview of the starter kit, highlighting its features and uses.

• Chapter 2. “Hardware” provides the hardware descriptions of the starter kit.

• Appendix A. “Board Layout and Schematics” provides a block diagram, board layouts, and detailed schematics of the starter kit.

• Appendix B. “Bill of Materials” provides the bill of materials for the components used in the design and manufacture of the starter kit.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is “DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level of the document.

For the most up-to-date information on development tools, see the MPLAB® IDE online help. Select the Help menu, and then Topics to open a list of available online help files.

2013 Microchip Technology Inc. DS70005147A-page 5

Page 6: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Italic characters Referenced books MPLAB IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or dialog

“Save project before build”

Underlined, italic text with right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file [options]

Curly brackets and pipe character: { | }

Choice of mutually exclusive arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [, var_name...]

Represents code supplied by user

void main (void){ ...}

Notes A Note presents information that we want to re-emphasize, either to help you avoid a common pitfall or to make you aware of operating differences between some device family members. A Note can be in a box, or when used in a table or figure, it is located at the bottom of the table or figure. Note 1: This is a note used in a

table.

Note: This is a standard note box.

CAUTION

This is a caution note.

DS70005147A-page 6 2013 Microchip Technology Inc.

Page 7: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Preface

RECOMMENDED READING

This user’s guide describes how to use the starter kit. The following Microchip documents are available and recommended as supplemental reference resources.

PIC32MZ Embedded Connectivity (EC) Family Data Sheet (DS60001191)

Refer to this document for detailed information on PIC32MZ EC family devices. Reference information found in this data sheet includes:

• Device memory maps

• Device pinout and packaging details

• Device electrical specifications

• List of peripherals included on the devices

MPLAB® XC32 C/C++ Compiler User’s Guide (DS50001686)

This document details the use of Microchip’s MPLAB XC32 C/C++ Compiler to develop an application.

MPLAB® X IDE User’s Guide (DS50002027)

Refer to this document for more information pertaining to the installation and implementation of the MPLAB X IDE software, as well as the MPLAB SIM Simulator software that is included with it.

Universal Serial Bus Specification and Associated Documents

The Universal Serial Bus is defined by the USB 2.0 specification and its associated supplements and class-specific documents. These documents are available from the USB Implementers Forum. See their web site at: http://www.usb.org

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at http://www.microchip.com. This web site makes files and information easily available to customers. Accessible by most Internet browsers, the web site contains the following information:

• Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software

• General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listings

• Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listings of seminars and events; and listings of Microchip sales offices, distributors and factory representatives

2013 Microchip Technology Inc. DS70005147A-page 7

Page 8: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE

Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest.

To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions.

The Development Systems product group categories are:

• Compilers – The latest information on Microchip C compilers and other language tools

• Emulators – The latest information on the Microchip in-circuit emulator, MPLAB REAL ICE™

• In-Circuit Debuggers – The latest information on the Microchip in-circuit debugger, MPLAB ICD 3

• MPLAB X IDE – The latest information on Microchip MPLAB X IDE, the Windows® Integrated Development Environment for development systems tools

• Programmers – The latest information on Microchip programmers including the PICkit™ 3 development programmer

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document.

Technical support is available through the web site at: http://support.microchip.com

DS70005147A-page 8 2013 Microchip Technology Inc.

Page 9: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Preface

DOCUMENT REVISION HISTORY

Revision A (November 2013)

This is the initial release of this document.

2013 Microchip Technology Inc. DS70005147A-page 9

Page 10: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

NOTES:

DS70005147A-page 10 2013 Microchip Technology Inc.

Page 11: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ EMBEDDEDCONNECTIVITY (EC)

STARTER KIT USER’S GUIDE

Chapter 1. Introduction

Thank you for purchasing a Microchip Technology PIC32MZ Embedded Connectivity (EC) Starter Kit. This board provides a low-cost, modular development system for Microchip’s line of 32-bit microcontrollers.

The starter kit comes preloaded with demonstration software for the user to explore the new features of the PIC32MZ EC family of devices. It is also expandable through a modular expansion interface, which allows the user to extend its functionality. The starter kit also supplies on-board circuitry for full debug and programming capabilities.

This chapter covers the following topics:

• Kit Contents• Starter Kit Functionality and Features

The preprogrammed example code on the PIC32MZ EC family MCU is available for download from the Microchip web site at http://www.microchip.com. All project files have been included so that the code may be used directly to restore the PIC32MZ EC family MCU on the starter kit to its original state (i.e., if the sample device has been reprogrammed with another program) or so you can use the tutorial code as a platform for further experimentation.

1.1 KIT CONTENTS

The PIC32MZ Embedded Connectivity (EC) Starter Kit contains the following items:

• PIC32MZ Embedded Connectivity (EC) Starter Kit development board• SMSC 8870A Ethernet PHY daughter board

• USB mini-B to full-sized A cable – USB debug cable to debug and power the starter kit development board

• USB micro-B to full-sized A cable – PIC32 USB cable to communicate with the PIC32 USB port

• RJ-45 CAT5 Ethernet patch cable – Ethernet CAT5 cable to communicate with the PIC32 Ethernet port

Note: If you are missing any part of a kit, contact a Microchip sales office for assis-tance. A list of Microchip offices for sales and service is provided on the back page of this document.

2013 Microchip Technology Inc. DS70005147A-page 11

Page 12: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

1.2 STARTER KIT FUNCTIONALITY AND FEATURESRepresentations of the layout of the PIC32MZ Embedded Connectivity (EC) Starter Kit are shown in Figure 1-1 and Figure 1-2.

The top assembly of the board includes these key features, as indicated in Figure 1-1:

1. PIC32MZ2048ECH144-I/PH (non-crypto) or PIC32MZ2048ECM144-I/PH (crypto) 32-bit microcontroller.

2. Green power indicator LED.3. On-board crystal or oscillator for precision microcontroller clocking (12 MHz).4. USB connectivity for on-board debugger communications.5. Green debug indicator LED.6. Three push button switches for user-defined inputs.7. Three user-defined indicator LEDs.8. USB Type A receptacle connectivity for PIC32 host-based applications.9. HOST mode power jumper.10. Daughter board connectors for flexible Ethernet PHY options.11. 32 kHz oscillator for RTCC and Timer1 (optional).12. External 2 GB SQI memory for expanded memory applications.13. Jumper for using or disconnecting the on-board debugger.

For details on these features, refer to Chapter 2. “Hardware”.

FIGURE 1-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (TOP VIEW)

Note: When running self-powered USB device applications, open the jumper JP1 to prevent possibly back-feeding voltage onto the VBUS from one port on the host to another (or from one host to another).

4

5

6

1

3

10

2

9

811

7

6

6

7

7

1213

DS70005147A-page 12 2013 Microchip Technology Inc.

Page 13: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Introduction

The bottom assembly of the board includes these key features, as indicated in Figure 1-2:

1. PIC24FJ256GB106 USB microcontroller for on-board debugging.

2. Regulated +3.3V power supply for powering the starter kit through USB or expansion board.

3. Connector for various expansion boards.

4. USB Type micro-AB receptacle for OTG and USB device connectivity for PIC32 OTG/device-based applications.

5. 50 MHz Ethernet PHY oscillator.

6. USB Host and OTG power supply for powering PIC32 USB applications.

FIGURE 1-2: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (BOTTOM VIEW)

3

1

4

6

2

5

2013 Microchip Technology Inc. DS70005147A-page 13

Page 14: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

NOTES:

DS70005147A-page 14 2013 Microchip Technology Inc.

Page 15: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ EMBEDDEDCONNECTIVITY (EC)

STARTER KIT USER’S GUIDE

Chapter 2. Hardware

This chapter describes the hardware features of the PIC32 Ethernet Starter Kit.

2.1 HARDWARE FEATURES

The key features of the PIC32MZ Embedded Connectivity (EC) Starter Kit are listed below. They are presented in the order given in Section 1.2 “Starter Kit Functionality and Features”. You can refer to Figure 1-1 for their locations on the board.

2.1.1 Processor Support

The PIC32MZ Embedded Connectivity (EC) Starter Kit is designed with a permanently mounted (i.e., soldered) PIC32MZ2048ECM144 processor.

2.1.2 Power Supply

There are two ways to supply power to the PIC32MZ Embedded Connectivity (EC) Starter Kit:

• USB bus power connected to USB debug connector J1

• An external application board with a regulated DC power supply that provides +5V can be connected to the J2 application board connector that is provided on the bottom side of the board

One green LED (D3) is provided to indicate the PIC32 microcontroller is powered up.

2.1.3 Debug USB Connectivity

The PIC32MZ Embedded Connectivity (EC) Starter Kit includes a PIC24FJ256GB106 USB microcontroller that provides debugger connectivity over USB. The PIC24FJ256GB106 is hard-wired to the PIC32 device to provide protocol translation through the I/O pins of PIC24FJ256GB106 to the ICSP™ pins of the PIC32.

If MPLAB REAL ICE™ or MPLAB ICD 3 are used with the starter kit, it is necessary to disconnect the on-board debugger from the PIC32 device. To do this, remove the JP2 jumper. When the on-board debugger is required, replace the JP2 jumper. When the JP2 jumper is installed, pin 1 must be connected to pin 3 and pin 2 must be connected to pin 4.

2.1.4 PIC32 USB Connectivity

There are three possible ways to connect to the PIC32 USB microcontroller:

• HOST Mode – Connect the device to the Type A connector J4, which is located on the top side of the starter kit. If using the Debug USB port to power the Host port, install jumper JP1 to short the back-power prevention diode. Note that a maximum of ~400 mA can be supplied from the Debug USB port to the Host port using this method. If the full 500 mA supply is needed, an external supply must be con-nected to the application board and jumper JP1 must be removed to prevent back-powering the Debug USB port.

2013 Microchip Technology Inc. DS70005147A-page 15

Page 16: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

• DEVICE Mode – Connect the debug mini-B USB cable to port J1 and then connect the starter kit to the host using a cable with a Type-B micro-connector to the starter kit’s micro-A/B port J5, which is located on the bottom side of the board. The other end of the cable must have a Type-A connector. Connect it to a USB host. Jumper JP1 should be removed.

• OTG Mode – Connect the starter kit to the OTG device using an OTG micro-A/B cable to the micro-A/B port J5, which is located on the bottom side of the board. The starter kit provides an on-board power supply capable of providing 120 mA Max. This supply is controlled by the PIC32MZ2048ECH144 microcontroller. Jumper JP1 should be removed.

2.1.5 Switches

Push button switches provide the following functionality:

• SW1: Active-low switch connected to RB12

• SW2: Active-low switch connected to RB13

• SW3: Active-low switch connected to RB14

The switches do not have any debounce circuitry and require the use of internal pull-up resistors; this allows you to investigate software debounce techniques. When Idle, the switches are pulled high (+3.3V). When pressed, they are grounded.

2.1.6 LEDs

The RH0 through RH2 LEDs are connected to PORTH of the processor. The PORTH pins are set high to light the LEDs.

2.1.7 Oscillator Options

The installed microcontroller has an oscillator circuit connected to it. The main oscillator uses an 12 MHz crystal (Y1) and functions as the controller’s primary oscillator. Depending on which is populated on the starter kit board, a 12 MHz external oscillator (Y4) may be used instead of Y1. Use of an external crystal is required to develop USB applications. The USB specification dictates a frequency tolerance of ±0.25% for high speed. Non-USB applications can use the internal oscillators. The starter kit also has provisions for an external secondary 32 kHz oscillator (Y2); however, this is not populated. A suitable oscillator, the ECS-3X8, can be obtained from Digi-Key: Part no. X801-ND CMR200TB32.768KDZFTR.

The PIC24FJ256GB106 is independently clocked and has its own 12 MHz crystal.

2.1.8 168-Pin Modular Expansion Connector

The PIC32MZ Embedded Connectivity (EC) Starter Kit has been designed with a 168-pin modular expansion interface, which allows the board to provide basic generic functionality and easy extendability to new technologies as they become available.

TABLE 2-1: STARTER KIT CONNECTOR PART NUMBERS

Connector HIROSE Electric PN

Starter Kit Connector FX10A-168P-SV1(71)

Application Board Connector FX10A-168S-SV

DS70005147A-page 16 2013 Microchip Technology Inc.

Page 17: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Hardware

2.1.9 Ethernet PHY

The PIC32MZ Embedded Connectivity (EC) Starter Kit has been designed to use a wide variety of Ethernet PHYs through the Reduced Media Independent Interface (RMII). The starter kit comes with a daughter board that is populated with a SMSC 8720A Ethernet PHY. The RMII has been isolated from the expansion connector.

To use a different Ethernet PHY other than what is offered, visit the microchipDIRECT website (www.microchipdirect.com) for the list of alternate options.

2013 Microchip Technology Inc. DS70005147A-page 17

Page 18: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

NOTES:

DS70005147A-page 18 2013 Microchip Technology Inc.

Page 19: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ EMBEDDEDCONNECTIVITY (EC)

STARTER KIT USER’S GUIDE

Appendix A. Board Layout and Schematics

A.1 BLOCK DIAGRAM

FIGURE A-1: HIGH-LEVEL BLOCK DIAGRAM OF THE PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT

PIC32MZ2048ECH144

(PIC24FJ256GB106)

ICSP™

VUSB3V3(1) or+5V_EXT

Debug USB

App

licat

ion

Boa

rd C

onne

ctor

Switches

LEDs

+5V EXT

USB OTG

USB Host

Device/OTG(Type micro-A/B)

Host(Type A)

Note 1: From Debugger USB Port.

+3.3VPowerSupply

EthernetPHY

10/100 Jack

Debugger Circuit

Power Circuit

DaughterBoard

2013 Microchip Technology Inc. DS70005147A-page 19

Page 20: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

A.2 BOARD LAYOUT

FIGURE A-2: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (TOP ASSEMBLY)

DS70005147A-page 20 2013 Microchip Technology Inc.

Page 21: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Board Layout and Schematics

FIGURE A-3: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (BOTTOM ASSEMBLY)

2013 Microchip Technology Inc. DS70005147A-page 21

Page 22: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

A.3 SCHEMATICSFIGURE A-4: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (PIC32MZ EC FAMILY

DEVICE)

P32_VDD

P32_VDD4.7K

R1

DNP

RG15

TRD1/SQID1/RG12

TRD2/SQID2/RG14

EBID5/PMD5

EBID6/PMD6

EBID7/PMD7

EBID4/PMD4

EBID3/PMD3

EBID2/PMD2

EBID1/PMD1

EBID10/PMD10

EBIA15/PMCS2/RD9

EBIA16/RK0

EBIWE/PMWR/RC3

SOSCO/RC14

EBID15/PMD15

EBID13/PMD13

EBID12/PMD12

EBID9/PMD9

EBID0/PMD0

EBID11/PMD11

EBID8/PMD8

TRD0/SQID0/RG13

TRD3/SQID3/RA7

TRCLK/SQICLK/RA6

SOSCI/RC13

SQICS0/RPD4/RD4

AN14/C1IND/RPG6/SCK2/RG6

AN4/C1INB/RB4

SDA2/RA3

SCL2/RA2

PGEC1/AN1/RPB1/RB1

PGED1/AN0/RPB0/RB0

RPA15/SDA1/RA15

RPA14/SCL1/RA14

INT0/RD0

RPD1/SCK1/RD1

EBIA13/PMA13/RJ13

EBIA12/PMA12/RC2

EBIA11/PMA11/RB12

EBIA10/PMA10/RB8

EBIA9/PMA9

EBIA5/PMA5/RA5

EBIA7/PMA7

EBIA6/PMA6

EBIA3/PMA3

EBIA2/PMA2/RG9

EBIA1/PMA1

EBIA0/PMA0/RJ15

PGED2/AN47/RPB7/RB7

PGEC2/AN46/RPB6/RB6

ICSP_MCLR_VPP_TARGET

TMS/RA0

TCK/RA1

TDO/RF12

TDI/RF13

VREF-/RA9

VREF+/RA10

D+

D-

ETXD0

ETXD1

ERXERR

ERXD1

ERXD0

EBIA19/RK5

EBIA20/RK6

EMDC

EMDIO

ETXEN

EBIA21/RK7

0.01uFC20

0.1uF

C1

P32_VDD0.01uFC21

0.1uFC2

0.1uFC3

P32_VDD0.1uF

C4

P32_VDD0.01uFC24

0.1uFC5

P32_VDD0.01uF

C250.1uFC6

P32_VDD0.01uF

C260.1uFC7

P32_VDD0.01uF

C27

P32_VDD

0.01uFC28

EBIA4/PMA4

VBUS

P32_VDD

P32_VDD

EBID14/PMD14

EREF_CLK

ECRS/RH13

EBIA14/PMCS1/PMA14/RA4

EBIA8/PMA8

EBIA18/RK4

RH0

RH1

RH2

AN7/RB12

AN8/RB13

AN3/C2INA/RPB3/RB3

RF3/USBID/RPF3

AN45/C1INA/RPB5/RB5/VBUSON

SCL3/RPF8/RF8

SQICS1/RPD5/RD5

AN32/AETXD0/RPD14/RD14

AN33/RPD15/SCK6/RD15

AN26/RPE9/RE9

AN25/RPE8/RE8

AN6/RB11

AN13/C1INC/RPG7/SDA4/RG7

AN12/C2IND/RPG8/SCL4/RG8

RPD10/SCK4/RD10

EBICS0/RJ4

EBIA17/RK3

EBIBS0/RJ12

EBIBS1/RJ10

SDA3/RPF2/RF2

AN2/C2INB/RPB2/RB2

AN42/ERXD2/RH6

0.01uFC22

0.01uFC23

0.1uFC8

0.1uFC9

ERXD3/RH9

ECOL/RH10

EBIRDY2/RH11

EBIA23/RH15

EBIADV/RH14

ECRS/RH12

EBICS2/RJ6/SQI_PWR

EBICS1/RJ5

ETXCLK/RPD7/RD7

EBIA22/RJ3

CVREFOUT/AN5/RPB10/RB10

AN10/RPB15/OCFB/RB15

RH3

AN9/RPB14/SCK3/RB14

EBIRDY3/RJ2

ETXERR/RJ0

EBICS3/RJ7

C47DNP

EBIOE/PMRD/RC4

EBIRDY2/RH11 84

ERXD0/RH881

RPF3/USBID/RF3 78

EMDC/AEMDC/RPD11/RD11 99

RPA15/SDA1/RA15 96

EBIA19/RK593

EBIA9/RPF4/SDA5/PMA9/RF4 90

EBIA14/PMCS1/PMA14/RA487

AN25/RPE8/RE823

MCLR20

VSS17

AN14/C1IND/RPG6/SCK2/RG614

EBIA12/AN21/RPC2/PMA12/RC211

AN36/ETXD1/RJ98

EBID7/AN15/PMD7/RE75

EBIA5/AN34/PMA5/RA52

VUSB3V374

AN26/RPE9/RE924

AN45/C1INA/RPB5/RB525

EBIA2/AN11/C2INC/RPG9/PMA2/RG921

VDD18

TMS/AN24/RA022

EBIA16/RK019

AN13/C1INC/RPG7/SDA4/RG715

EBIWE/AN20/RPC3/PMWR/RC312

AN12/C2IND/RPG8/SCL4/RG816

EBIOE/AN19/RPC4/PMRD/RC413

EBIBS0/RJ129

EBIA6/AN22/RPC1/PMA6/RC16

EBIBS1/RJ1010

AN35/ETXD0/RJ87

EBID5/AN17/RPE5/PMD5/RE53

EBID6/AN16/PMD6/RE64

AN23/RG151

ERXD3/RH9 82

SDA3/RPF2/RF2 79

SCL3/RPF8/RF880

VBUS73

VSS 75

D- 76

ECRS/RH12 100

EBIA15/RPD9/PMCS2/PMA15/RD9 97

RPD10/SCK4/RD10 98

EBIA20/RK694

EBIA8/RPF5/SCL5/PMA8/RF5 91

EBIA18/RK4 92

VDD88

SCL2/RA2 85

EBIRDY1/SDA2/RA3 86

ECOL/RH10 83

D+ 77

RPA14/SCL1/RA14 95

VSS 89

AN37/ERXCLK/EREFCLK/RJ1127

EBIA0/PMA0/RJ1530

VDD33

PGED1/AN0/RPB0/RB036

VREF-/CVREF-/AN27/RA939

AVSS42

EBIRP/RH245

EBIA7/AN49/RPB9/PMA7/RB948

AN4/C1INB/RB426

EBIA11/PMA11/RJ1429

EBIA13/PMA13/RJ1328

VSS32

PGEC1/AN1/RPB1/RB135

AN2/C2INB/RPB2/RB234

PGED2/AN47/RPB7/RB738

AVDD41

VREF+/CVREF+/AN28/RA1040

AN39/ETXD3/RH144

EBIA10/AN48/RPB8/PMA10/RB847

EBIWP/RH346

AN6/RB1150

AN3/C2INA/RPB3/RB331

PGEC2/AN46/RPB6/RB637

AN38/ETXD2/RH043

CVREFOUT/AN5/RPB10/RB1049

EBIA17/RK353

TCK/AN29/RA156

AN7/RB1259

AN10/RPB15/OCFB/RB1562

AN40/ERXERR/RH465

EBIA4/PMPA4/RH768

OSCI/CLKI/RC1271

EBIA3/PMA3/RK252

EBIA1/PMA1/RK151

VDD55

TDO/AN31/RPF12/RF1258

VSS54

TDI/AN30/RPF13/SCK5/RF1357

AN9/RPB14/SCK3/RB1461

VDD64

AN8/RB1360

VSS63

AN42/ERXD2/RH667

AN33/RPD15/SCK6/RD1570

AN41/ERXD1/RH566

AN32/AETXD0/RPD14/RD1469

OSCO/CLKO/RC1572

ERXDV/ECRSV/AECRSDV/RH13101

EBIADVN/RH14 102

EBIA23/RH15 103

RPD0/RTCC/INT0/RD0 104

SOSCI/RPC13/RC13 105

SOSCO/RPC14/T1CK/RC14 106

VDD 107

VSS108

RPD1/SCK1/RD1 109

EBID14/RPD2/PMD14/RD2 110

EBID15/RPD3/PMD15/RD3 111

EBID12/RPD12/PMD12/RD12 112

EBID13/PMD13/RD13 113

ETXERR/RJ0114

EMDIO/AEMDIO/RJ1115

EBIRDY3/RJ2 116

EBIA22/RJ3 117

SQICS0/RPD4/RD4 118

SQICS1/RPD5/RD5 119

ETXEN/RPD6/RD6 120

ETXCLK/RPD7/RD7 121

VDD122

VSS 123

EBID11/RPF0/PMD11/RF0 124

EBID10/RPF1/PMD10/RF1 125

EBIA21/RK7 126

EBID9/RPG1/PMD9/RG1 127

EBID8/RPG0/PMD8/RG0128

TRCLK/SQICLK/RA6129

TRD3/SQID3/RA7 130

EBICS0/RJ4 131

EBICS1/RJ5 132

EBICS2/RJ6 133

EBICS3/RJ7 134

EBID0/PMD0/RE0135

VSS136

VDD 137

EBID1/PMD1/RE1 138

TRD2/SQID2/RG14 139

TRD1/SQID1/RG12 140

TRD0/SQID0/RG13 141

EBID2/PMD2/RE2 142

EBID3/RPE3/PMD3/RE3143

EBID4/AN18/PMD4/RE4 144

U1PIC32MZ

33RR48

33RR49

33RR50

33RR51

C49

0RR55

DNP

1

2

3

4

5

6

J7

P32_VDD

PGED2/AN47/RPB7/RB7

PGEC2/AN46/RPB6/RB6

ICSP_MCLR_VPP_TARGET

P32_VDD

P32_VDD

TC25L5I32K7680

EN 1

GND 2OUT3

VDD4

Y2

P32_VDD 0.01uFC36

P32_VDD

0.01uF

C29

P32_VDD

24MHz

EN1

GND2

OUT3

VDD 4Y4

24MHz

Y1

8.0pF

C34

8.0pF

C35

1M±1%

R56

Only Oscillator or Crystal Configuration

should be populated.

Please check PCB/BOM to determine

which configuration is populated

32.768 kHz

DS70005147A-page 22 2013 Microchip Technology Inc.

Page 23: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Board Layout and Schematics

FIGURE A-5: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (USB HOST AND OTG POWER SUPPLIES)

MH1

P32_VDD

ERXD1

ERXD0

ERXERR

EMDIO

EMDC

ETXEN

ETXD0

ETXD1

EREF_CLK

ICSP_MCLR_VPP_TARGET

0.1uF

C19

0RR38

PHY Daughter Board Connections

33RR52

33RR53

R54 DNP

CLK_IN

CLK_IN

EN1

GND2 OUT 3

VDD 4Y5

50MHz

P32_VDD

0.01uFC48

ECRS/RH13

SLM-112-01-G-S + SLM-103-01-G-S

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

2425

25

J6

2 HDR/MB

SOSCI/RC13

4.7K

R4

1uF

C33

100KR24

PGOOD 1

Vout 2

Vin 3

GND 4C-5

C+6

SHDN7

SELECT8U5

MCP1253_MSOP

VBUS

P32_VDD

P32_VDD

D+

D-

SH

IELD

6

D-2

5

D+3

VBUS1

4

J4

6

D-2

5

D+3

VBUS1

4

J5

TYPE MICRO A/B

D+

D-C46100uF

+5V_EXT

EN4

IN5

GND 2

OC 3

OUT 1

U6

TPS2051B

* Install Jumper if poweringfrom Debugger Power Supply

USB HOST Power Supply

USB OTG/Device Power Supply (120mA MAX)

+5V_EXT VBUS

D1MBR0520LT1G

DEVICE/OTG PORT

HOST TYPE - TYPE A

+5V_DUSB

10ˇFC44

10ˇFC45

R46

DNP

AN45/C1INA/RPB5/RB5/VBUSON

AN45/C1INA/RPB5/RB5/VBUSON AN2/C2INB/RPB2/RB2

AN2/C2INB/RPB2/RB2

VBUS_DEVICE

RF3/USBID/RPF3

1 2

JP1

D7

GRN

P32_VDD+3.3V_PKOB

330RR13

C424.7uF

FLAGB 4

OUT 5

GND2

ON3

IN1

U7

FPF2104

TARGET_POWER_ENABLE

100KR25

100K

R26

VBUS_DEVICE_SWITCHED_SENSE

R47 DNP

Current Limiting Switch

2013 Microchip Technology Inc. DS70005147A-page 23

Page 24: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC

32MZ

Em

bed

ded

Co

nn

ectivity (EC

) Starter K

it User’s G

uid

e

DS

70005147A

-page 24

2013 M

icrochip Technolo

gy Inc.

(Local VDD/VSS bypass/decoupling)

+3.3V_PKOB

C256)

UTIL_SDIGND

TARGET ICSP SIGNALS

SCK

SDI

SDO

GND

GND

ICSP_MCLR_VPP_TARGET

GND

GND

10K

R19

10KR20

0K

22

K

21

4.7KR2

4.7K

R3

330R

R8

330R

R9

330R

R10

2.21K

R31

0.1uF

C14

0.1uF

C15

0.1uF

C16

0.1uF

C17

1uFC32

R42 0R

100K

R27

R44DNP

R43DNP

R36

100R

1206 1/4W

+3.3V_PKOB

MMBT3904-TP

Q2

MMBT3904-TPQ3

MMBT3906-TPQ1

0.1uF

C13

PGEC2/AN46/RPB6/RB6

PGED2/AN47/RPB7/RB7

PKOB Mode REAL ICE Mode

pins 1-3: Shorted pins 1-3: Open

pins 2-4: Shorted pins 2-4: Open

JP2 Jumper Positions

1 3

2 4

JP2

FIGURE A-6: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (DEBUGGER)

+3.3V_PKOB

+3.3V_PKOB

+3.3V_PKOB

+3.3V_PKOB

+3.3V_PKOB

+3.3V_PKOB

+3.3V_PKOB

+3.3V_PKOB

+3.3V_PKOB

SERIAL EEPROM (25L

ASSEMBLY_ID_0

ASSEMBLY_ID_1

ICSP_MCLR_VPP_PICKIT3

ICSP_MCLR_VPP_PICKIT3

POWER_GOOD_PICKIT3

SCK

SDI

SDO

UTIL_CS

UTIL_CS

UTIL_WP

UTIL_WP

USB_D-

USB_D+

UTIL_SCK

UTIL_SCK

UTIL_SDI

UTIL_SDO

UTIL_SDO

VBUS_DEVICE

VDD_SENSE

VPP_GND

VPP_ON

VPP_SENSE

VREF_2.5VGND

+3.3V_PKOB

GND

GND

GND

GND

GNDGND

GND

GND

GND

GND

PGC__PKOB

PGD_PKOB

PGC__PKOB

PGD_PKOB

VDD_SENSE

VPP_GND

VPP_ON

VPP_SENSE

USB_D-

USB_D+

GND

GND

+3.3V_PKOB

POWER_GOOD_PICKIT3

GND

VBUS_DEVICE

POWER DISTRIBUTION/SWITCHING

USB INTERFACE(BUS POWERED)

GND

+3.3V_PKOB

EGND

10K

R14

10K

R15

10KR16

1

R

10

R

10K

R18

R39 0R

330R

R11

330RR12

2.21K

R32

2.21K

R30

2.2uFC40

2.2uFC41

0.1uFC11

0.1uF

C12

0.01uFC30

0.1uFC10

C38

8pF

C39

8pF

10ˇFC43

200K

R29

200K

R28

100R

R35

1uF

C31

R33

3.92K

R37

3.16K

R45DNP2.2K

1K

R34

4

13

2Y3

12.0MHz

D6

GRN

SCK6

SI5

CS1

WP3

VS

S4

SO2

VC

C8

HOLD7

U4

25LC256-I/ST

D2MBR0520LT1G

D+ 3

D- 2

GND 5

ID4

6789

VUSB1

, , ,

J3

UX60-MB-5ST

1

2

3

4

5

6

J2

AN

6/R

B6

17P

MP

D4/

RE

464

AV

SS

20P

MP

D1/

RE

161

PM

A13

/AN

10/R

B10

23R

F0

58

VD

D26

RD

755

PM

A1/

AN

14/R

B14

29P

MW

R/R

D4

52

PM

A8/

SC

L2/R

F5

32V

CP

CO

N/R

D1

49

AN0/RB016

AN3/RB313

VDD10

MCLR7

PMA5/RG64

PMD5/RE51

USBID/RF333

D-/RG336

OSC1/CLKIN/RC1239

RTCC/RD8 42

PMCS1/RD11 45

SOSCO/RC14 48

AN2/RB214

AN1/RB115

PMA2/RG98

VSS9

AN5/RB511

PMD6/SCL3/RE62

PMD7/SDA3/RE73

PMA4/RG75

AN

7/R

B7

18

AV

DD

19

AN

8/R

B8

21

PM

PD

3/R

E3

63

PM

PD

2/R

E2

62

PM

PD

0/R

E0

60

PM

A12

/AN

11/R

B11

24

VS

S25

PM

A11

/AN

12/R

B12

27

EN

VR

EG

57

Vca

p/V

DD

CO

RE

56

RD

654

PM

A0/

AN

15/R

B15

30

PM

A9/

SD

A2/

RF

431

PM

BE

/RD

351

DH

P/R

D2

50

Vusb35

Vbus34

VSS41

OSC2/CLKO/RC1540

VDD38

SOSCI/RC13 47

INT0/RD0 46

SCL1/PMCS2/RD10 44

USBOENAN4/RB412

PMA3/RG86

D+/RG237

SDA1/RD9 43

PM

A7/

AN

9/R

B9

22R

F1

59

PM

A10

/AN

13/R

B13

28P

MR

D/R

D5

53

U2PIC24FJ256GB106

GN

D_E

P9

GND4

VIN1

PWRGD5

VOUT8

VIN2

SHDN3

SENSE 7

CDELAY 6

U3

MCP1727-3302E/MF

+3.3V_PKOB

GND

10K

R17

+5V_DUSB

VBUS_DEVICE_SWITCHED_SENSE

TARGET_POWER_ENABLE

Page 25: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Board Layout and Schematics

FIGURE A-7: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (APPLICATION BOARD CONNECTOR, SQI MEMORY AND POWER, LEDS, AND SWITCHES)

117 118

111 112

105 106

99 100

93 94

87 88

81 82

75 76

69 70

57 58

51 52

45 46

39 40

33 34

27 28

21 22

15 16

9 10

3 4

119 120

107 108

109 110

113 114

115 116

95 96

97 98

101 102

103 104

83 84

85 86

89 90

91 92

71 72

73 74

77 78

79 80

59 60

61 62

65 66

67 68

47 48

49 50

53 54

55 56

35 36

37 38

41 42

43 44

25 26

29 30

23 24

19 20

13 14

17 18

11 12

7 8

1 2

5 6

31 32

63 64

121 122

123 124

125 126

127 128

129 130

135 136

137 138

131 132

133 134

139 140

141 142

143 144

145

148

149 150

151 152

153 154

159 160

161 162

155 156

157 158

163 164

165 166

167 168

146

147

J1

FX

10A

-168P

-SV

1(7

1)

RG15

P32_VDD

TRD2/SQID2/RG14

EBID5/PMD5

EBID4/PMD4

EBID3/PMD3

EBID2/PMD2

EBID1/PMD1

INT0/RD0

EBIA6/PMA6

EBIA4/PMA4

EBIA3/PMA3

EBIA2/PMA2/RG9

EBIA1/PMA1

EBIA0/PMA0/RJ15

AN4/C1INB/RB4

EBIA5/PMA5/RA5

AN3/C2INA/RPB3/RB3

AN45/C1INA/RPB5/RB5/VBUSON

AN33/RPD15/SCK6/RD15

AN25/RPE8/RE8

EBIA17/RK3

EBIA18/RK4

AN26/RPE9/RE9

EBIA19/RK5

EBIA20/RK6

EBIA21/RK7

EBIA23/RH15

EBIADV/RH14

EBICS1/RJ5

PGEC1/AN1/RPB1/RB1

AN2/C2INB/RPB2/RB2

AN14/C1IND/RPG6/SCK2/RG6

RPD10/SCK4/RD10

+5V_EXT

ICSP_MCLR_VPP_TARGET

TMS/RA0

TCK/RA1TDO/RF12

TDI/RF13

VREF-/RA9

VREF+/RA10

SDA2/RA3

SCL2/RA2

EBIWE/PMWR/RC3

EBID15/PMD15

EBID14/PMD14

EBID13/PMD13

EBID12/PMD12

EBID9/PMD9

EBID10/PMD10

EBID11/PMD11

TRD0/SQID0/RG13

TRD1/SQID1/RG12

TRCLK/SQICLK/RA6

SOSCO/RC14

SOSCI/RC13

SQICS1/RPD5/RD5

EBIA16/RK0

AN42/ERXD2/RH6

AN6/RB11

RH0

RH1

ERXD3/RH9

ECOL/RH10

EBIRDY2/RH11

ETXCLK/RPD7/RD7

CVREFOUT/AN5/RPB10/RB10

SQICS0/RPD4/RD4

RPD1/SCK1/RD1

SCL3/RPF8/RF8

SDA3/RPF2/RF2

AN10/RPB15/OCFB/RB15

EBIRDY3/RJ2

RH3

PGED1/AN0/RPB0/RB0

AN7/RB12

AN9/RPB14/SCK3/RB14

P32_VDDP32_VDD

P32_VDD

+5V_EXT

P32_VDD

P32_VDD P32_VDD

P32_VDD

+5V_EXT +5V_EXT

EBID15/PMD15

EBID4/PMD4

EBIA14/PMCS1/PMA14/RA4

EBIA15/PMCS2/RD9

EBIA13/PMA13/RJ13

EBIA12/PMA12/RC2

EBIA11/PMA11/RB12

EBIA10/PMA10/RB8

EBIA9/PMA9

EBIA8/PMA8

EBIA7/PMA7

AN8/RB13

ETXERR/RJ0

EBIBS0/RJ12

EBIBS1/RJ10

EBIA22/RJ3

EBICS0/RJ4

DEBUG

MCLR

SOSC

EB

I AD

DR

ES

S

INTO

JTAG

EB

I A

DD

RE

SS

EB

I A

DD

RE

SS

EB

I CO

NT

DEBUG

JTAG

TR

AC

EE

BI D

AT

AE

BI C

ON

TR

OL

EB

I DA

TA

EB

I CO

NT

RO

LCE# 1

SO/SIO12

SIO23

VSS4

SI/SIO05

SCK 6

SIO37

VDD8

U9

SST26VF032

0.1uFC18

SQI_VDD

SQICS1/RPD5/RD5

TRCLK/SQICLK/RA6TRD2/SQID2/RG14

TRD3/SQID3/RA7

TRD0/SQID0/RG13

TRD1/SQID1/RG12

330R

R5

330R

R7

330R

R6

GreenD5

LED2

RedD3

LED1

YellowD4

LED3

USER LEDS'

S1

S2

S3

GND

USERSSWITCH'

RH0

RH1

RH2

AN7/RB12

AN8/RB13

AN9/RPB14/SCK3/RB14

10KR23

SQI_VDD

P32_VDD

EBICS2/RJ6/SQI_PWR

EBICS3/RJ7

EBICS2/RJ6/SQI_PWR

EBID0/PMD0

EBID6/PMD6

RH2

EBIOE/PMRD/RC4

RPA15/SDA1/RA15

RPA14/SCL1/RA14

RF3/USBID/RPF3

PGEC2/AN46/RPB6/RB6

PGED2/AN47/RPB7/RB7

AN13/C1INC/RPG7/SDA4/RG7

AN12/C2IND/RPG8/SCL4/RG8

GP

IOLC

DR

GB

GP

IO/P

PS

AD

C

GP

IOLC

DR

GB

GP

IO/P

PS

I2C

EBID15/PMD15

EBID15/PMD15

EBID7/PMD7

EBID8/PMD8

EBID10/PMD10

EBID10/PMD10

EBID4/PMD4

EBID4/PMD4

TRD3/SQID3/RA7

AN45/C1INA/RPB5/RB5/VBUSON

AN32/AETXD0/RPD14/RD14

G

S

D

Q5

ECRS/RH12

AN9/RPB14/SCK3/RB14

AN12/C2IND/RPG8/SCL4/RG8

AN14/C1IND/RPG6/SCK2/RG6 ETXCLK/RPD7/RD7

2013 Microchip Technology Inc. DS70005147A-page 25

Page 26: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

NOTES:

DS70005147A-page 26 2013 Microchip Technology Inc.

Page 27: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ EMBEDDEDCONNECTIVITY (EC)

STARTER KIT USER’S GUIDE

Appendix B. Bill of Materials

TABLE B-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS

Reference Description Manufacturer Part No.

C1, C2, C3, C4, C5, C6, C7, C8,

C9, C10, C11, C12, C13, C14, C15, C16, C17, C18,

C19

CAP CER .10 µF 50V X7R 0603 TDK Corporation C1608X7R1H104M

C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C48

CAP CER 10000 pF 50V X7R 0603 TDK Corporation C1608X7R1H103M

C31, C32, C33

CAP CER 1.0 µF 16V X5R 10% 0603 TDK Corporation C1608X5R1C105K

C38, C39 CAP CER 8 pF 50V NP0 0603 Murata GRM1885C1H8R0DZ01D

C40, C41 CAP CER 2.2 µF 16V X5R 0603 TDK Corporation C1608X5R1C225K

C42 CAP CER 4.7 µF 6.3V 10% X5R 0603 Taiyo Yuden JMK107BJ475KA-T

C43, C44, C45

CAP CER 10 µF 16V Y5V 0805 Murata GRM21BF51C106ZE15L

C46 CAP CER 100 µF 6.3V Y5V 1206 Murata GRM31CF50J107ZE01L

D1, D2 DIODE SCHOTTKY 20V 0.5A SOD123 ON Semiconductor MBR0520LT1G

D3 LED, SMD, RED, 0603 package Kingbright Corp APT1608EC

D4 LED, SMD, YEL, 0603 package Kingbright Corp APT1608YC

D5, D6, D7 LED, SMD, GRN, 0603 package Kingbright Corp APT1608SGC

J1 Hirose FX10_ 168-pin Header Hirose Electric Co Ltd FX10A-168P-SV1(71)

J7 CONN HEADER .050" 6 POS PCB GOLD Samtec TMS-106-01-G-S

J3 CONN RECEPT MINI USB 2.0 5 POS Hirose Electric Co Ltd UX60-MB-5ST

J4 CONN USB TYPE MICRO_A/B Hirose Electric Co Ltd ZX62-AB-5PA(11)

J5 CONN USB TYPE A R/A BLACK On Shore Technology Inc USB-A1HSB6

J6 12 POS 0.05" SINGLE ROW TH HEADER Samtec SLM-103-112-L-S

@J6 3POS 0.05" SINGLE ROW TH HEADER Samtec SLM-103-103-L-S

JP2 2X2 (0.05"x 0.05") TH HEADER Samtec FTS-102-01-L-D

installed @ JP2

SHUNT 2POS (0.05" x 0.05") SULLINS NPB02DVFN-RC

JP1 CONN HEADER .100" SNGL STR 2POS SULLINS PRPC002SAAN-RC

2013 Microchip Technology Inc. DS70005147A-page 27

Page 28: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

Q1 TRANS SS PNP 40V 300MW SOT23 Micro Commercial Co. MMBT3906-TP

Q2, Q3 TRANSISTOR NPN GP 40V SOT23 Micro Commercial Co. MMBT3904-TP

Q5 MOSFET P-CH 8V 3.7A SOT23-3 ON Semiconductor NTR2101PT1G

R1, R2, R3, R4

RES 4.7K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT4K70

R5, R6, R7, R8,

R9, R10, R11, R12,

R13

RES 330 OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT330R

R14, R15, R16, R17, R18, R19, R20, R21, R22, R23

RES 10K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT10K0

R24, R25, R26, R27

RES 100K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT100K

R28, R29 RES 200K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT200K

R30, R31, R32

RES 2.21K OHM 1/10W 1% 0603 SMD Panasonic - ECG ERJ-3EKF2211V

R33 RES 3.92K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-073K92L

R34 RES 1K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT1K00

R35 RES 100 OHM 1/10W 5% 0603 SMD Yageo RC0603JR-07100RL

R36 RES 100 OHM 1/4W 1% 1206 SMD Yageo RC1206FR-07100RL

R37 RES 3.16K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-073K16L

R38, R39, R42, R55

RES 0.0 OHM 1/10W 0603 SMD Rohm Semiconductor MCR03EZPJ000

R48, R49, R50, R51, R52, R53

RES 33 OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT33R0

S1, S2, S3 Switch, Tact, PB MOM SMT, Series TL3302

C&K PTS635SK25SMTR LFS

U1 PIC32MZ2048ECH144-I/PH Microchip Technology Inc. PIC32MZ2048ECH144-I/PH

U2 IC PIC MCU FLASH 256K 64-TQFP Microchip Technology Inc. PIC24FJ256GB106-I/PT

U3 IC REG LDO 1.5A 3.3V 8DFN Microchip Technology Inc. MCP1727-3302E/MF

U4 IC EEPROM 256 KBIT 10 MHz 8TSSOP Microchip Technology Inc. 25LC256-I/ST

U5 IC MULT CONFIG 3.3/5V .12A 8MSOP Microchip Technology Inc. MCP1253-33X50I/MS

U6 IC PWR DIST SWITCH SNGL SOT23-5 Texas Instruments TPS2051BDBVR

U7 IC SWITCH LOAD FULL FUNC SOT23-5 Fairchild Semiconductor FPF2104

U9 IC FLASH 32 MBIT 8-pin SOIC Microchip Technology Inc. SST26VF032-80-5I-S2AE

Y3 CRYSTAL 12.000000 MHZ 8 pF SMD NDK NX3225SA-12.000000MHZ

Y4 OSC MEMS 24.000 MHz SMD Abracon Corporation ASDMB-24.000MHZ-LC-T

Y5 OSC MEMS 50.000 MHz_1.8V ~3.3V SMD

Abracon Corporation ASEMB-50.000MHZ-LC-T

+3.3V_P-KOB, GND

PC TEST POINT MINIATURE SMT Keystone Electronics 5015

TABLE B-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS (CONTINUED)

Reference Description Manufacturer Part No.

DS70005147A-page 28 2013 Microchip Technology Inc.

Page 29: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

Bill of Materials

bottom of board

BUMPON CYLINDRICAL .375X.135 BLK 3M SJ61A8

Y1 CRYSTAL 24 MHz 8 pF SMD AVX CX3225GA24000D0PTVZ1

Y2 OSCILLATOR 32.768 kHz 3.3V SM Abracon Corporation TC25L5I32K7680

C34, C35 CAP CER 8 pF 50V NPO 0603 TDK Corporation C1608C0G1H080D080AA

C36 CAP CER 10000 pF 50V X7R 0603 TDK Corporation C1608X7R1H103M

R56 RES 1M OHM 1/8W 1% 0805 SMD Vishay Dale RMCF0805FT1M00

TABLE B-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS (CONTINUED)

Reference Description Manufacturer Part No.

2013 Microchip Technology Inc. DS70005147A-page 29

Page 30: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide

NOTES:

DS70005147A-page 30 2013 Microchip Technology Inc.

Page 31: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

2013 Microchip Technology Inc. DS70005147A-page 31

NOTES:

Page 32: PIC32MZ Embedded Connectivity (EC) Starter Kit User’s …ww1.microchip.com/downloads/en/DeviceDoc/70005147… ·  · 2013-11-21PIC32MZ Embedded Connectivity (EC) Starter Kit User’s

DS70005147A-page 32 2013 Microchip Technology Inc.

AMERICASCorporate Office2355 West Chandler Blvd.Chandler, AZ 85224-6199Tel: 480-792-7200 Fax: 480-792-7277Technical Support: http://www.microchip.com/supportWeb Address: www.microchip.com

AtlantaDuluth, GA Tel: 678-957-9614 Fax: 678-957-1455

Austin, TXTel: 512-257-3370

BostonWestborough, MA Tel: 774-760-0087 Fax: 774-760-0088

ChicagoItasca, IL Tel: 630-285-0071 Fax: 630-285-0075

ClevelandIndependence, OH Tel: 216-447-0464 Fax: 216-447-0643

DallasAddison, TX Tel: 972-818-7423 Fax: 972-818-2924

DetroitNovi, MI Tel: 248-848-4000

Houston, TX Tel: 281-894-5983

IndianapolisNoblesville, IN Tel: 317-773-8323Fax: 317-773-5453

Los AngelesMission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608

New York, NY Tel: 631-435-6000

San Jose, CA Tel: 408-735-9110

Canada - TorontoTel: 905-673-0699 Fax: 905-673-6509

ASIA/PACIFICAsia Pacific OfficeSuites 3707-14, 37th FloorTower 6, The GatewayHarbour City, KowloonHong KongTel: 852-2401-1200Fax: 852-2401-3431

Australia - SydneyTel: 61-2-9868-6733Fax: 61-2-9868-6755

China - BeijingTel: 86-10-8569-7000 Fax: 86-10-8528-2104

China - ChengduTel: 86-28-8665-5511Fax: 86-28-8665-7889

China - ChongqingTel: 86-23-8980-9588Fax: 86-23-8980-9500

China - HangzhouTel: 86-571-2819-3187 Fax: 86-571-2819-3189

China - Hong Kong SARTel: 852-2943-5100 Fax: 852-2401-3431

China - NanjingTel: 86-25-8473-2460Fax: 86-25-8473-2470

China - QingdaoTel: 86-532-8502-7355Fax: 86-532-8502-7205

China - ShanghaiTel: 86-21-5407-5533 Fax: 86-21-5407-5066

China - ShenyangTel: 86-24-2334-2829Fax: 86-24-2334-2393

China - ShenzhenTel: 86-755-8864-2200 Fax: 86-755-8203-1760

China - WuhanTel: 86-27-5980-5300Fax: 86-27-5980-5118

China - XianTel: 86-29-8833-7252Fax: 86-29-8833-7256

China - XiamenTel: 86-592-2388138 Fax: 86-592-2388130

China - ZhuhaiTel: 86-756-3210040 Fax: 86-756-3210049

ASIA/PACIFICIndia - BangaloreTel: 91-80-3090-4444 Fax: 91-80-3090-4123

India - New DelhiTel: 91-11-4160-8631Fax: 91-11-4160-8632

India - PuneTel: 91-20-3019-1500

Japan - OsakaTel: 81-6-6152-7160 Fax: 81-6-6152-9310

Japan - TokyoTel: 81-3-6880- 3770 Fax: 81-3-6880-3771

Korea - DaeguTel: 82-53-744-4301Fax: 82-53-744-4302

Korea - SeoulTel: 82-2-554-7200Fax: 82-2-558-5932 or 82-2-558-5934

Malaysia - Kuala LumpurTel: 60-3-6201-9857Fax: 60-3-6201-9859

Malaysia - PenangTel: 60-4-227-8870Fax: 60-4-227-4068

Philippines - ManilaTel: 63-2-634-9065Fax: 63-2-634-9069

SingaporeTel: 65-6334-8870Fax: 65-6334-8850

Taiwan - Hsin ChuTel: 886-3-5778-366Fax: 886-3-5770-955

Taiwan - KaohsiungTel: 886-7-213-7830

Taiwan - TaipeiTel: 886-2-2508-8600 Fax: 886-2-2508-0102

Thailand - BangkokTel: 66-2-694-1351Fax: 66-2-694-1350

EUROPEAustria - WelsTel: 43-7242-2244-39Fax: 43-7242-2244-393Denmark - CopenhagenTel: 45-4450-2828 Fax: 45-4485-2829

France - ParisTel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79

Germany - DusseldorfTel: 49-2129-3766400

Germany - MunichTel: 49-89-627-144-0 Fax: 49-89-627-144-44

Germany - PforzheimTel: 49-7231-424750

Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781

Italy - VeniceTel: 39-049-7625286

Netherlands - DrunenTel: 31-416-690399 Fax: 31-416-690340

Poland - WarsawTel: 48-22-3325737

Spain - MadridTel: 34-91-708-08-90Fax: 34-91-708-08-91

Sweden - StockholmTel: 46-8-5090-4654

UK - WokinghamTel: 44-118-921-5800Fax: 44-118-921-5820

Worldwide Sales and Service

10/28/13