www.SASFORKS.com Form# Vulture-2-20-2019 ©2017-2019 S.A.S. of Luxemburg, LLC, USA

Pick profits from your carcasses

SAS Vulture Wire Extractor

CASH RECOVERY BY FULLY PROCESSING SCRAP AUTO CARCASSES

EXTRACT MORE WEIGHT & GENERATE MAXIMUM REVENUE: Copper wiring, radiators, heater core Aluminum condensers, a/c evaporators, dash supports Transmissions remove left over transmissions Electric motors window, wiper, seat and blower motors

ENGINEERED & BUILT FOR OPTIMUM PERFORMANCE: Beak style pinchers to rip open dashes, rocker panels and expose wire harness Clamp surface face surface is designed to maximize wire extraction without cutting Penetrate tight areas with speed & accuracy with streamlined smooth exterior shape Hardened pins and bushings and grease-able pivot points for extend service life. Hydraulic cylinder on rotating head is protected to minimize potential damage

FAST & SIMPLE INSTALLATION Machine attachment pins directly to factory stick mount, quick coupler or pin grabber Hydraulic clamp and rotate function operate off one hydraulic feed

VIDEO ONLINE http://www.sasforks.com/product/vulture/ BEST SUITED FOR: Mini excavator with 1 auxilary hydraulic function plumbed to the end of the stick for rotating head with jaws:

Bi-directional fuild circuit, return not free flow to tank, 21 Mpa (3,000 psi), 45 L/min (10 gpm)

Free flow return line (case drain) to filter to tank required

Operating max weight of 9 metric tonnes ( max.10 US ton)

Operator cab should have safety glass windshield and protective steel mesh to protect operator

SAS attachment: Grapple & rotator attachment weight 600 lbs. estimated.

Information & specifications presented herein are for illustration only. Actual specifications are subject to change.

™

Made in the USA

www.SASFORKS.com Form# Vulture-2-20-2019 ©2017-2019 S.A.S. of Luxemburg, LLC, USA

Item standard .

Excavator/Backhoe Weight < 10 US Tons 9 metric tonnes

A- Head assembly height 53” 1347mm Weight 680 lbs. 308 kg Two mount pins no (option) Quick coupler mount no (option)

B- Closed max width 19.5” 495mm Rotator hydraulic fitting type 2 hose #8 JIC, 1 drain hose#6 JIC Protective hose mount covers yes

C-Head & rotator height 28” 724mm Protective cylinder enclosure yes 24 MPa (3,500 psi) heavy duty claw cylinder yes Pivot bushing & hardened main pin yes

D– Jaws: Open max inside 17.7” 450mm Wire exposure & extraction tooth Fixed tooth centered on rotation point for control Wire clamping surface for ample wire grip

E– Jaws: Open max outside 33” 848mm Smooth exterior for fast targeting into wire yes

F- Wire harness stripping-v (Patented) no (option) Wire stripper must be mounted to pole or dumpster

G- Color Yellow _____

H– Integrated diverter valve system yes Splits aux. hydr. on stick for grapple & rotator 12 volt 24 volt

J - Joystick handle with electric button for diverter no (option) Generic button & relay for cab for diverter yes

Hydraulic requirements existing on equipment: 1 Bi-directional hydraulic function plumbed to end of stick. Max. 24 Mpa (3,500 psi), Max. 57 L/min (15 gpm)

Case drain line, free flow return to filter to tank

Installation of switch in cab to control diverter for rotate & grapple

Customer responsible for labor, hoses, modifications to pressures, valves, cylinders or other work required for excavator to properly operate.

Customer Sign X: ___________________________ Date: ___/___/___

Sales Contact Sign X:________________________ Date: ___/___/___

Pick profits from your carcasses

Contact: S.A.S. of Luxemburg, LLC. 133 Center Drive, Hwy 54 Luxemburg, WI 54217 U.S.A.

USA Phone: 920-845-2198 USA Fax: 920-845-2309

Email Adam: adam@sasforks.com Email: Paul: paul@sasforks.com

Web Site: www.sasforks.com

BWQ:

CAPACITY………… @Radius Over Side @ Lift Ht Of Machine?_________# @ _________ ROS @ ____ Ht Load desired?_______# @ _________ ROS @ ____ Ht

Machine weight?__________metric tonne US ton

MACHINE: Make _____________ Model__________ Serial # ___________________________________ Electrical system (diverter solenoid) 12v 24v

Existing one auxiliary spool on stick Yes No

Existing two auxiliary spools on stick Yes No (aux. spools cannot include pin grabber pilot )

Attachment: 2 Pin, Quick Coupler: Mfg Series S/N

™

Specifications subject to change.

C

A

D

B E

Machine arm shown only for illustration. Not included in Vulture attachment.

SAS Vulture Wire Extractor