Pilot Walktour Release Note

V3.4 (Android)

Contents

Contents 1 Product Overview .................................................................................................................. 1

2 New Features .......................................................................................................................... 2

Micro MOS ........................................................................................................................ 2

Real-Time Statistics .......................................................................................................... 2

Statistics Report ................................................................................................................ 3

Improved Data Management ......................................................................................... 5

Parallel Test ....................................................................................................................... 6

New Data Format (*.dcf) ................................................................................................. 7

Carrier Aggregation Test ................................................................................................ 8

3 Hardware and Operating System Requirements............................................................... 9

Supported Terminals ....................................................................................................... 9

Test with Walktour Pack ............................................................................................... 10

4 Known Issues and Limitations ........................................................................................... 11

Product Overview

1 © Dingli 13-05-2016 DL 634 RN

1 Product Overview Pilot Walktour is a multi-technology mobile network test and measurement tool, based on the

latest commercial smartphone devices. It is also one of the most powerful and cost efficient

handheld based test tool in the market for in-building, and various voice and data services testing.

Pilot Walktour also provides user friendly indoor and outdoor operation interface, real-time

network quality measurement and troubleshooting, and perform tests from a real user-perception.

New Features

2 © Dingli 13-05-2016 DL 634 RN

2 New Features Micro MOS

Micro MOS is a portable and compact device that is designed for MOS test. The MOS audio file is

replayed and recorded through the earphone interface, and the recorded audio file is transmitted

through Bluetooth from the Micro MOS device to the handset. Micro MOS supports MOS for

POLQA and PESQ with NB and SWB sampling.

Figure 1 Micro MOS

Real-Time Statistics The real-time statistics function is moved to the Information interface. Test information can be

dynamically displayed on the interface based on the current radio access technology and test

service.

New Features

3 © Dingli 13-05-2016 DL 634 RN

Figure 2 Real-time test information display

Statistics Report Users may select a single or multiple data files for indoor and outdoor statistics generation, with

more KPI information and display modes (e.g. by table, chart).

The statistics’ results include

• Key KPIs of the test service and network technology • Go or No Go information • Detailed service KPI information • Key KPIs displayed by bar chart/pie chart, or PDF/CDF

New Features

4 © Dingli 13-05-2016 DL 634 RN

Figure 3 Categorized Test Information

Pilot Walktour V3.4 (Android) provides some default report templates. Users may directly select a

template to generate the statistics result for a single or multiple data files. In addition, users may

also import a predefined report template from Pilot Pioneer reporting tool into Pilot Walktour

Android, and generate the corresponding statistics reports.

Figure 4 Statistics report

New Features

5 © Dingli 13-05-2016 DL 634 RN

Improved Data Management The data management function is improved, which includes:

Data categorization: Data files are categorized into indoor and outdoor data files. Data filtering: Filter data files based on test service, network technology, test time, etc. Data search: Analyze data files and search data files based on exception events such as

dropped call, blocked call. Invalid filter: Hide data files which test duration is less than user-defined values. The default

value is 3 minutes.

Figure 5 Data Filter, Search functions

Exception outcome: Automatically display the statistics outcome with exception count or Go or No-Go information.

New Features

6 © Dingli 13-05-2016 DL 634 RN

Figure 6 View data details

Data properties: view data properties, including upload status, test duration, test plan, etc.

Figure 7 View data properties

Parallel Test Parallel Test is a service test where multiple test services are conducted at the same time.

New Features

7 © Dingli 13-05-2016 DL 634 RN

Parallel Test can be started based on user-defined conditions, which include:

• Start parallel test based on absolute time. In this mode, each test service starts at the specific time.

• Start parallel test based on relative time. In this mode, each test service starts based on a user-defined period and the time when the parallel test starts.

• Start parallel test based on the status of the defined test service. In this mode, users need to define a reference test service, then other sub test services may be started based on the status (e.g. start, success, end) of the reference service.

Figure 8 Parallel service test

New Data Format (*.dcf) New Dingli data format (*.dcf) is supported in this version.

The *.dcf data format is commonly used in the industry and can be processed by many major

third-party post processing software. All Dingli’s data collection products will support this data

format in the future and will gradually replace the previous *.rcu data format. These two data

formats will remain to coexist over a certain period, during which users may select either one as

required.

New Features

8 © Dingli 13-05-2016 DL 634 RN

Figure 9 New data format

Carrier Aggregation Test Pilot Walktour V3.4 (Android) supports LTE carrier aggregation (CA) test.

Events, messages, and parameters related to CA can be displayed during the test.

For the information on devices that support CA test, see section 4.1.

Figure 10 LTE CA parameter display

Hardware and Operating System Requirements

9 © Dingli 13-05-2016 DL 634 RN

3 Hardware and Operating System Requirements Supported Terminals

Device Model Supported Frequencies and Bands

HTC One M8 2G: GSM/EDGE 850/900/1800/1900 MHz 3G: TD-SCDMA 1900 (F), 2000 (A) 4G: TDD-LTE Band 38/39/40/41

Samsung Galaxy S6 G9200

4G: TDD-LTE Bands 38/39/40/41 4G: FDD-LTE Bands 1/3/4/7/8/28 3G: WCDMA Bands 1(2100 MHz)/2 (1900 MHz)/5 (850 MHz)/8 (900 MHz) 3G: TD-SCDMA Bands 34 (2010 MHz)/39 (1880 MHz) 3G: CDMA EVDO 800 2G: GSM 850/900/1800/1900 2G: CDMA 1X 800 LTE Cat. 6 and Carrier Aggregation are supported.

Samsung Galaxy S6 G9208

4G: TDD-LTE Bands 38/39/40/41 4G: FDD-LTE Bands 1/3/4/7/8/28 3G: TD-SCDMA Bands 34 (2010 MHz)/39 (1880 MHz) 2G: GSM 850/900/1800/1900 MHz LTE Cat. 6 and Carrier Aggregation are supported.

Samsung Galaxy S6 G9209

4G: TDD-LTE Bands 38/40/41 4G: FDD-LTE Bands 1/3/4/7/8/28 3G: CDMA EVDO 800 2G: GSM 850/900/1800/1900 MHz 2G: CDMA 800 LTE Cat. 6 and Carrier Aggregation are supported.

Samsung Galaxy S5 G9006V

4G: FDD-LTE Bands 3(1800 MHz); FDD-LTE Bands 1(2100 MHz)/7(2600 MHz) (only applicable to international roaming) 4G: TDD-LTE Bands 40 (2300 MHz)/41 (2500 MHz) 3G: UMTS 850/900/1900/2100 MHz； 2G: GSM 850/900/1800/1900 MHz

Samsung Galaxy S5 G9008V

4G: TDD-LTE Bands 38/39/40； 3G: TD-SCDMA 1880/2010； 2G: GSM/EDGE/GPRS 850/900/1800/1900 MHZ 3G: WCDMA 850/900/1900/2100 MHz (only applicable to international roaming) 4G: FDD-LTE Bands 3 (1800 MHz)/7 (2600 MHz) (only applicable to international roaming)

Hardware and Operating System Requirements

10 © Dingli 13-05-2016 DL 634 RN

Device Model Supported Frequencies and Bands

Samsung Galaxy S5 G9009W

4G: TDD-LTE Band 41 (2600 MHz) 4G: FDD-LTE Bands 1 (2100 MHz)/3 (1800 MHz) 3G: UMTS Bands 1 (2100 MHz)/2 (1900 MHz)/5 (850 MHz) (only applicable to international roaming) 3G: CDMA EVDO 800/1900 MHz 2G: CMDA 1X 800 MHz 2G: GSM 850/900/1800/1900 MHz (only applicable to international roaming)

Samsung Note4 N910G

4G: TDD-LTE Bands 38/40 4G: FDD-LTE Bands 1/2/3/4/5/7/8 3G: WCDMA 850/900/1900/2100 MHz 2G: GSM 850/900/1800/1900 MHz LTE Carrier Aggregation is supported.

ZTE Nubia Z9 NX508J

4G: FDD-LTE Bands 1 (2100 MHz)/3 (1800 MHz)/7 (2600 MHz) 4G: TDD-LTE Bands 38 (2600 MHz)/41 (2500 MHz)/40 (2300 MHz)/39 (1900 MHz) 3G: TD-SCDMA 2010/1900 MHz 3G: UMTS Bands 5 (850 MHz)/8 (900 MHz)/2 (1900 MHz)/1 (2100 MHz) 3G: CDMA EVDO 800 2G: GSM 850/900/1800/1900 MHz 2G: CDMA 800 LTE Carrier Aggregation is supported.

ZTE Nubia Z9 Max NX510J

4G: FDD-LTE Bands 1 (2100 MHz)/3 (1800 MHz)/7 (2600 MHz) 4G: TDD-LTE Bands 38 (2600 MHz)/41 (2500 MHz)/40 (2300 MHz)/39 (1900 MHz) 3G: TD-SCDMA 2010/1900 MHz 3G: UMTS Bands 5 (850 MHz)/8 (900 MHz)/2 (1900 MHz)/1 (2100 MHz) 3G: CDMA EVDO 800 2G: GSM 850/900/1800/1900 MHz 2G: CDMA 800 LTE Carrier Aggregation is supported.

Note: VoLTE/ CA test is verified only in limited regions with specified terminals. To use these

terminals for VoLTE/CA test in your region, please contact Dingli support in advance for further

clarification and guidance.

Test with Walktour Pack Pilot Walktour V3.4 (for Android) can be supported with Pilot Walktour Pack Case V3.0

(firmware kernel version: 1.1.2.0303), and Pilot Walktour Pack V3.3.

Known Issues and Limitations

11 © Dingli 13-05-2016 DL 634 RN

4 Known Issues and Limitations None.

DINGLI CORP., LTD

Address: No. 8, 5th Technology Road, Gangwan Avenue, Zhuhai, 519085, P.R. China Tel: 0756-3626100 Fax: 0756-3391900 Email: support@dingli.com sales@dingli.com