pine cones poster

PINES CONES PROJECT PINES CONES PROJECT Esmeralda Cañadas Vidal, Víctor Rodríguez Polaino and Lidia Marín Martínez IES Pedro Jiménez Montoya LOGO HOW WE MADE IT:: - 1 st step: we had to cut the needles of the pine cones. - 2 nd step: we joined the 3 bars, doing a triangle form, with the wire that we had cut before. - 3 rd step: we glued the needles with silicone to cover all the wire and to create shapes. - 4 th step: we put a grille inside the lamp (that have form of triangle)to prevent the bars from touching the needles. HOW WE MADE IT:: - 1 st step: we had to cut the needles of the pine cones. - 2 nd step: we joined the 3 bars, doing a triangle form, with the wire that we had cut before. - 3 rd step: we glued the needles with silicone to cover all the wire and to create shapes. - 4 th step: we put a grille inside the lamp (that have form of triangle)to prevent the bars from touching the needles. I NTRODUCTION: We are going to build a lamp with pine cones. We have chosen this idea because it was the most difficult one and the most original too. At first we decided to build a garland with pines cones, but it was very easy and it wasn't very nice. We realized this project because we saw it in a TV program how a man a was doing a lamp with recycle paper, so we decided to do the same thing but with pine cones. I NTRODUCTION: We are going to build a lamp with pine cones. We have chosen this idea because it was the most difficult one and the most original too. At first we decided to build a garland with pines cones, but it was very easy and it wasn't very nice. We realized this project because we saw it in a TV program how a man a was doing a lamp with recycle paper, so we decided to do the same thing but with pine cones. MATERIALS: - Pinecones (20) - Scissors to prune - Silicone gun - Wire (1.5 m) - Metal bars( 4) - Pliers MATERIALS: - Pinecones (20) - Scissors to prune - Silicone gun - Wire (1.5 m) - Metal bars( 4) - Pliers How much does it cost? It hasn’t been very expensive because we used materials that we already have. We only have to buy wire and metal bars. In total it has cost 5 €. How much does it cost? It hasn’t been very expensive because we used materials that we already have. We only have to buy wire and metal bars. In total it has cost 5 €. PROBLEMS: The principal problem has been the time because we only have an hour a week and it wasn’t enough time to make it. Also we have had problems with the structure because it wasn’t very rigid. TIME OF CONSTRUCTION: We have spent four weeks doing this fantastic project. The first two weeks we made the scientific project and the others two, we made the lamp. PROBLEMS: The principal problem has been the time because we only have an hour a week and it wasn’t enough time to make it. Also we have had problems with the structure because it wasn’t very rigid. TIME OF CONSTRUCTION: We have spent four weeks doing this fantastic project. The first two weeks we made the scientific project and the others two, we made the lamp. THINGS WE CAN DO WITH PINE CONES: - Garlands. - Table center. - Christmas decoration. - Candle holder. - Door crown. - Feeders. - Lamp with pines cones. - Bracelets and earrings Conclusion: we have learnt that with recycle materials we can do a lot of things and without pollution. It needs some effort, time, and patience but it doesn’t mind because the results are fantastic.

Upload: bilingual-section

Post on 08-Jul-2015

143 views

Category:

Documents

0 download

Report

Download

Tags:

Embed Size (px):

TRANSCRIPT

PINES CONES PROJECTPINES CONES PROJECTEsmeralda Cañadas Vidal, Víctor Rodríguez Polaino and Lidia Marín MartínezIES Pedro Jiménez Montoya

LOGO

HOW WE MADE IT::

- 1st step: we had to cut the needles of the pine cones.

- 2nd step: we joined the 3 bars, doing a triangle form, with the wire that we had cut before.

- 3rd step: we glued the needles with silicone to cover all the wire and to create shapes.

- 4th step: we put a grille inside the lamp (that have form of triangle)to prevent the bars from touching the needles.

HOW WE MADE IT::

- 1st step: we had to cut the needles of the pine cones.

- 2nd step: we joined the 3 bars, doing a triangle form, with the wire that we had cut before.

- 3rd step: we glued the needles with silicone to cover all the wire and to create shapes.

- 4th step: we put a grille inside the lamp (that have form of triangle)to prevent the bars from touching the needles.

INTRODUCTION:

We are going to build a lamp with pine cones. We have chosen this idea because it was the most difficult one and the most original too. At first we decided to build a garland with pines cones, but it was very easy and it wasn't very nice. We realized this project because we saw it in a TV program how a man a was doing a lamp with recycle paper, so we decided to do the same thing but with pine cones.

INTRODUCTION:

MATERIALS:- Pinecones (20)- Scissors to prune- Silicone gun- Wire (1.5 m)- Metal bars( 4)- Pliers

How much does it cost?

It hasn’t been very expensive because we used materials that we already have.

We only have to buy wire and metal bars.

In total it has cost 5 €.

How much does it cost?

It hasn’t been very expensive because we used materials that we already have.

We only have to buy wire and metal bars.

In total it has cost 5 €.

PROBLEMS: The principal problem has been the time because we only have an hour a week and it wasn’t enough time to make it. Also we have had problems with the structure because it wasn’t very rigid.

TIME OF CONSTRUCTION:We have spent four weeks doing this fantastic project.The first two weeks we made the scientific project and the others two, we made the lamp.

THINGS WE CAN DO WITH PINE CONES:

- Garlands.

- Table center.

- Christmas decoration.

- Candle holder.

- Door crown.

- Feeders.

- Lamp with pines cones.

- Bracelets and earrings

Conclusion:

we have learnt that with recycle materials we can do a lot of things and without pollution.

It needs some effort, time, and patience but it doesn’t mind because the results are fantastic.