pioneer_xv-dv360_rrv3411_sm_[et]
TRANSCRIPT
PIONEER CORPORATION 4-1, Meguro 1-chome,PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, LonPIONEER EUROPE NV Haven 1087, Keetberglaan 1, 912PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253
PIONEER CORPORATION 2006
XV-DV360
Meguro-ku, Tokyo 153-8654, Japang Beach, CA 90801-1760, U.S.A.
0 Melsele, BelgiumAlexandra Road, #04-01, Singapore 159936
ORDER NO.
RRV3411
DVD/CD RECEIVER
XV-DV360THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power RequirementRegional restriction codes (Region No.)
Remarks
XV-DV360 KUCXJ AC 120 V 1
For details, refer to "Important Check Points for Good Servicing".
T-ZZK MAY 2006 printed in Japan
C
D
F
A
B
E
1 2 3 4SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casualdo-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have beentrained to properly and safely repair complex products such as those covered by this manual.Improperly performed repairs can adversely affect the safety and reliability of the product and mayvoid the warranty. If you are not qualified to perform the repair of this product properly and safely, youshould not risk trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, bir th defects or other reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65
NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement
parts must be of identical designation.
REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que
les pièces de remplacement doivent avoir la même désignation.
ANY MEASUREMENTS NOT WITHIN THELIMITS OUTLINED ABOVE ARE INDICATIVEOF A POTENTIAL SHOCK HAZARD ANDMUST BE CORRECTED BEFORE RETURN-ING THE APPLIANCE TO THE CUSTOMER.
2. PRODUCT SAFETY NOTICEMany electrical and mechanical parts in the appliance
have special safety related character istics. These areoften not evident f rom visual inspect ion nor theprotection afforded by them necessarily can be obtainedby using replacement components rated for voltage,wattage, etc. Replacement par ts which have thesespecial safety character ist ics are identif ied in thisService Manual.
Electr ical components having such features areidentified by marking with a on the schematics andon the parts list in this Service Manual.The use of a substitute replacement component whichdoes not have the same safety characteristics as thePIONEER recommended replacement one, shown in theparts list in this Service Manual, may create shock, fire,or other hazards.
Product Safety is continuously under review and newinstructions are issued from time to time. For the latestinformation, always consult the current PIONEERService Manual. A subscription to, or additional copiesof, PIONEER Service Manual may be obtained at anominal charge from PIONEER.
(FOR USA MODEL ONLY)1. SAFETY PRECAUTIONS
The following check should be performed for thecont inued protect ion of the customer and servicetechnician.
LEAKAGE CURRENT CHECKMeasure leakage current to a known ear th ground
(water pipe, conduit, etc.) by connecting a leakagecurrent tes ter such as S impson Model 229-2 orequivalent between the earth ground and all exposedmetal par ts of the appliance (input/output terminals,screwheads, metal overlays, control shaft, etc.). Plugthe AC line cord of the appliance directly into a 120VAC 60 Hz outlet and turn the AC power switch on. Anycurrent measured must not exceed 0.5 mA.
Deviceundertest
Leakagecurrenttester
Earthground
Reading shouldnot be above0.5 mA
Also test withplug reversed(Using AC adapterplug as required)
Test allexposed metalsurfaces
AC Leakage Test
XV-DV36021 2 3 4
C
D
F
A
B
E
3
5 6 7 8
[Important Check Points for Good Servicing]In this manual, procedures that must be performed during repairs are marked with the below symbol.Please be sure to confirm and follow these procedures.
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as radio/TV interference and foreign noise.
3 Make sure the soldering of repaired locations is properly performed.
When you solder while repairing, please be sure that there are no cold solder and other debris.Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.In addition, be sure that there are no pinched wires, etc.
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure connections and suitable usage. Please exchange the power cord if necessary.
0 Safe environment should be secured during servicing.
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries. Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.Adjustments should be performed in accordance with the procedures/instructions described in this manual.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper cleaning should be performed to restore their performances.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the specified substance. Make sure the proper amount is applied.
5. Shipping mode and Shipping screws
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV3604
1 2 3 4
CONTENTS SAFETY INFORMATION..................................................................................................................................... 21. SPECIFICATIONS ............................................................................................................................................ 52. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6
2.1 PACKING ................................................................................................................................................... 62.2 EXTERIOR SECTION................................................................................................................................ 82.3 06 LOADER ASSY................................................................................................................................... 102.4 TRAVERSE MECHANISM ASSY-S ......................................................................................................... 12
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM.......................................................................................... 143.1 BLOCK DIAGRAM ................................................................................................................................... 143.2 LOAB ASSY and OVERALL WIRING CONNECTION DIAGRAM ........................................................... 163.3 DVD MAIN ASSY (1/5)............................................................................................................................. 183.4 DVD MAIN ASSY (2/5)............................................................................................................................. 203.5 DVD MAIN ASSY (3/5)............................................................................................................................. 223.6 DVD MAIN ASSY (4/5)............................................................................................................................. 243.7 DVD MAIN ASSY (5/5)............................................................................................................................. 263.8 DAMP ASSY (1/2).................................................................................................................................... 283.9 DAMP ASSY (2/2).................................................................................................................................... 303.10 DISPLAY and USB ASSYS.................................................................................................................... 323.11 POWER SUPPLY UNIT.......................................................................................................................... 343.12 WAVEFORMS ........................................................................................................................................ 36
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 394.1 LOAB ASSY............................................................................................................................................. 394.2 DVD MAIN ASSY ..................................................................................................................................... 404.3 DAMP ASSY ............................................................................................................................................ 444.4 DISPLAY and USB ASSYS...................................................................................................................... 464.5 POWER SUPPLY UNIT............................................................................................................................ 48
5. PCB PARTS LIST ........................................................................................................................................... 506. ADJUSTMENT ............................................................................................................................................... 58
6.1 ADJUSTMENT ITEMS AND LOCATION ................................................................................................. 586.2 JIGS AND MEASURING INSTRUMENTS............................................................................................... 586.3 NECESSARY ADJUSTMENT POINTS ................................................................................................... 596.4 TEST MODE ............................................................................................................................................ 606.5 MECHANISM ADJUSTMENT.................................................................................................................. 61
7. GENERAL INFORMATION............................................................................................................................. 637.1 DIAGNOSIS ............................................................................................................................................. 63
7.1.1 TEST MODE...................................................................................................................................... 637.1.2 DISPLAY SPECIFICATION OF THE TEST MODE............................................................................ 647.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY ............................................................ 657.1.4 SPECIFICATION OF MODEL INFORMATION DISPLAY .................................................................. 667.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE ............................................................. 677.1.6 SERVICE TEST MODE ..................................................................................................................... 687.1.7 METHOD FOR DIAGNOSING DEGRADATION OF THE LDS ON THE PICKUP ASSY .................. 707.1.8 DVD TROUBLE SHOOTING.............................................................................................................. 717.1.9 ID NUMBER AND ID DATA SETTING ............................................................................................... 747.1.10 CIRCUIT DESCRIPTION OF DIGITAL AMP. SECTION .................................................................. 777.1.11 SPECIFICATIONS FOR THE PROTECTION CIRCUITS FOR THE DIGITAL AMPLIFIER............. 787.1.12 PASS/FAIL TEST PROCEDURE OF HDMI TRANSMITTER IC ...................................................... 797.1.13 DISASSEMBLY................................................................................................................................ 80
7.2 PARTS...................................................................................................................................................... 877.2.1 IC ....................................................................................................................................................... 87
8. PANEL FACILITIES ...................................................................................................................................... 102
1 2 3 4
C
D
F
A
B
E
5
5 6 7 8
1. SPECIFICATIONS
Accessories• FM Antenna (ADH7030)
• AM Loop Antenna (ATB7013)
• Video Cable (L = 1.5 m) (XDE3046)
• Remote Control (AXD7440)
• AA size IEC R6 dry cell batteries (to confirmsystem operation)
Manufactured under license from Dolby Laboratories.“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
• Power cord(ADG7021)
Disc / content format playback compatibilityThis player is compatible with a wide range of disc types (media) and formats. Playable discs will generally feature one of the following logos on the disc and/or disc packaging. Note however that some disc types, such as recordable CD and DVD, may be in an unplayable format.
See the Disc compatibility table below for more information.
• This unit will play DVD+R/+RW discs.
• is a trademark of Fuji Photo Film Co. Ltd.
• is a trademark of DVD Format/Logo Licensing Corporation.
• Also compatible with KODAK Picture CD.
This player supports the IECís Super VCD stan-dard for superior picture quality, dual soundtracks, and widescreen support.
DVD-Video DVD-R DVD-RW
Video CD
Fujicolor CD
Audio CD CD-R CD-RW
VIDEOCD
Super Video CD (Super VCD)
• Amplifier sectionRMS Power Output:
Front, Center, Surround. . . 60 W per channel(1 kHz, 10 % T.H.D., 4 Ω)
Subwoofer. . .60 W(100 Hz, 10 % T.H.D., 4 Ω)
• Disc sectionDigital audio characteristics . . . . . . . . . DVD fs: 96 kHz, 24-bitType . . . . . . DVD system, Video CD/Super VCD system and Compact Disc digital audio systemFrequency response . . . .4 Hz to 44 kHz (96kHz sampling) /
4 Hz to 22 kHz (48kHz sampling)Wow and Flutter . . . . . . . . Limit of measurement
(±0.001 % W.PEAK) or less (JEITA)
• FM tuner sectionFrequency range. . . . . . . . 87.5 MHz to 108 MHzAntenna. . . . . . . . . . . . . . . . . . 75 Ω, unbalanced
• AM tuner sectionFrequency range:
With 9kHz step. . . . . . . . 531 kHz to 1602 kHzWith 10kHz step. . . . . . . 530 kHz to 1700 kHz
Antenna. . . . . . . . . . . . . . . . . . . . . Loop antenna
• MiscellaneousPower requirements. . . . . . . . . .AC 120 V, 60 HzPower consumption. . . . . . . . . . . . . . . . . . . 44 WPower consumption in standby . . . . . . . . 0.25 WDimensions. . . 420(W)mmx60(H)mmx330(D)mm
(16 9/16 in.(W) x 2 3/8 in.(H) x 13 in.(D))Weight. . . . . . . . . . . . . . . . . 3.1 kg / 6 lbs. 13 oz.
• Accessories (DVD/CD receiver)Remote control . . . . . . . . . . . . . . . . . . . . . . . . . 1AA/R6 dry cell batteries (to confirm system operation) . . . . . . . . . . . . . . 2Video cable (yellow plugs). . . . . . . . . . . . . . . . . 1AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . 1FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . 1Setup GuideOperating instructions
TV CONTROL
VOLUME
HOMEMENU
AUDIO
SUBTITLE
ANGLE
ZOOM
STANDBY/ON
MUTE
LINE
TOP MENU
RETURN
TEST TONE SOUND
CLEAR
SLEEP
DISPLAY
1 3
4 6
7
2
5
8 9
0
SURROUND
TUNE
TUNE
STST ENTER
USB
SETUP
MENU
OPEN/CLOSE
INPUT VOLUME CHANNEL
DVD/CDTUNER
(FM/AM)
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV3606
1 2 3 4
2. EXPLODED VIEWS AND PARTS LIST
2.1 PACKING
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.Screws adjacent to mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual.(In the case of no amount instructions, apply as you think it appropriate.)
NOTES:
Front side
Joint of Packing
16
22
20
21
17
19 193
46
7, 8
5
2
23
1
1 2 3 4
C
D
F
A
B
E
7
5 6 7 8
PACKING SECTION PARTS LIST
Mark No. Description Part No.
> 1 AC Power Cord ADG7021
2 FM Antenna ADH7030
3 AM Loop Antenna ATB7013
NSP 4 Dry Cell Battery (AA/R6) XEX3002
5 Video Cable XDE3046
NSP 6 Warranty Card ARY7045
7 Operating Instructions ARE7614
(English/French)
8 Setup Guide (English/French) ARE7604
9 • • • • • •
10 • • • • • •
11 • • • • • •
12 • • • • • •
13 • • • • • •
14 • • • • • •
15 • • • • • •
16 Remote Control AXD7440
17 Battery Cover AZN8018
18 • • • • • •
NSP 19 Polyethylene Bag AHG7117
20 Packing Sheet AHG7053
21 Pad L AHA7454
22 Pad R AHA7455
23 Packing Case AHG8457
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV3608
1 2 3 4
2.2 EXTERIOR SECTION
E
BC
A
32
32
16
3
32
17
3232 32
BC
A
F
F
12
D
32
32
10
D
G
G
32
13E
28
19
32
32 32
32
33
32
79
8
2
16
14
15Refer to"2.3 06 LOADER ASSY".
18
29
32
4
20
22
26
2327
25
24
21
CO
NT
AC
T S
IDE
NO
N-C
ON
TA
CT
S
IDE32
D
E
G CH
B
31
1 2 3 4
C
D
F
A
B
E
9
5 6 7 8
EXTERIOR SECTION PARTS LIST
Mark No. Description Part No.
1 DAMP ASSY AWK7932
2 DVD MAIN ASSY AWM8027
3 USB ASSY AWU8290
4 DISPLAY ASSY AWU8289
5 • • • • • •
> 6 POWER SUPPLY UNIT AWR7046
7 FM/AM TUNER UNIT AXX7172
8 11P FFC/60V ADD7542
9 11P FFC/60V ADD7543
10 13P FFC/60V ADD7541
11 • • • • • •
12 2P Housing Wire Assy ADX7480
13 CONNECTOR ASSY PF05PP-B40
14 CONNECTOR ASSY PG13KK-F22
NSP 15 06 Loader Assy VWT1226
16 Earth Spring W5.1 ABH7240
17 Gnd Plate W5.1 ABH7241
NSP 18 Chassis ANA7187
19 Rear Panel ANC8402
20 Locking Card Spacer AEC7372
21 Front Panel Assy AXG7295
NSP 22 Button AAD7753
NSP 23 Display Window AAK8327
NSP 24 Front Panel AMB7911
25 Pioneer Name Plate VAM1129
26 Rubber Foot VEB1325
27 Tray Panel AAK8329
28 Bonnet AZN8017
NSP 29 Name Label AAL7424
30 • • • • • •
NSP 31 Energy Star Label AAX8022
32 Screw BBZ30P080FNI
33 Screw BSZ30P060FTC
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36010
1 2 3 4
2.3 06 LOADER ASSY
06 LOADER ASSY PARTS LIST
A
A
To DVD MAIN CN101 (Pickup)
To DVD MAIN CN104 (Stepping Motor)
To DVD MAIN CN102 (Spindle Motor)
ToDVDM CN103
2Refer to "2.4 Traverse Mechanism Assy-S".
3
12
2313
17
21
16
22
15
14
22
22
22
20
19
91
7
10
11
6
8
8
8
8
18
24
A
Lubricating OilGYA1001
DaifreeGEM1036
Refer to" Application of Lubricant".
Note :
Lubricating OilGYA1001
Pickup leneses Cleaning liquid GEM1004 Cleaning paper GED-008
Mark No. Description Part No.
NSP 1 LOAB Assy VWG2346
2 Traverse Mechanism Assy-S DXX2575
3 Loading Motor Assy VXX2912
4 • • • • •
5 • • • • •
6 Flexible Cable (24P) ADD7545
7 Connector Assy 2P VKP2253
8 Floating Rubber VEB1351
9 Belt VEB1358
10 Stabilizer VNE2253
11 Loading Base VNL1917
12 Float Base 04 VNL1968
13 Drive Cam VNL1919
14 Gear Pulley VNL1921
15 Loading Gear VNL1922
16 Drive Gear VNL1923
17 SW Lever VNL1925
18 Clamper Plate 04 VNE2342
19 Bridge 04 VNE2343
20 Clamper 04 VNL1969
21 Screw JGZ17P028FTC
22 Screw VBA1094
23 Tray VNL1920
24 Clamp Magnet VMG1029
Mark No. Description Part No.
1 2 3 4
C
D
F
A
B
E
11
5 6 7 8
Application of Lubricant
Lubricating OilGYA1001
Around the shaft
No. 11 Loading Base
No. 13 Drive Cam
No. 13 Drive Cam
No. 23 Tray
No. 23 Tray
Front View Rear View
DaifreeGEM1036
Inner side of a ditch
Concave of unevennessTop View Bottom View
DaifreeGEM1036
DaifreeGEM1036
Side of the rib
Concave of unevenness
DaifreeGEM1036 Concave of unevenness
DaifreeGEM1036
Inner side of a ditch
Lubricating OilGYA1001
Inner side of a ditch
Lubricating OilGYA1001
Lubricating OilGYA1001
Lubricating OilGYA1001
Lubricating OilGYA1001
Lubricating OilGYA1001
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36012
1 2 3 4
2.4 TRAVERSE MECHANISM ASSY-S
ToDVDM CN101(Pickup Assy)
ToDVDM CN104
(Stepping Motor)
To DVDM CN102(Spindle Motor)
CO
NT
AC
T S
IDE
NO
N-C
ON
TA
CT
S
IDE
13
8
10
10
11
11
12
2
4
1
3
6
9
5
14
7
Silicone AdhesiveGEM1037
Note : When part #2 replaced,part #13 also need to bereplaced at the same time.
Note : Spindle screw (DBA1252) of No.13 is the screw which applied special bond.Therefore the adhesion becomes inteffective when takes it off once. Spindle screw is the part which cannot recycle.When part #2 is replaced, part #13 also need to be replaced at the same time.
Refer to" Application of Lubricant".
Note :
1 2 3 4
C
D
F
A
B
E
13
5 6 7 8
TRAVERSE MECHANISM ASSY-S PARTS LIST
Mark No. Description Part No.
> 1 06SD Pickup Assy OXX8020
2 Spindle Motor N200 DXM1197
NSP 3 Guide Shaft VK1 DLA1940
NSP 4 Sub Guide Shaft VK1 DLA1941
NSP 5 Joint VK1B DNK4272
NSP 6 Joint Spring VK1 DBK1235
7 Stepping Motor VK1 DXM1201
NSP 8 Mechanism Frame VK1 DNK4160
9 Precision Screw VK1 DBA1209
10 Skew Screw VK1 DBA1211
11 Skew Spring VK1 DBH1516
NSP 12 Stepping Screw DBA1205
13 Spindle Screw VK1(for Service) DBA1252
NSP 14 Hold Spring DBK1297
XV-DV3605 6 7 8
C
D
F
A
B
E
-AMP)
XV-DV36014
1 2 3 4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM3.1 BLOCK DIAGRAM
RESET
SCLSDAMUTE
PDN
SDOTW
BE
MT1389FE
64MSDRAM
16MFLASH
16kEEPROM
MOTORDRIVER
LOADERMECHA
A/DAK5358ET
FLDisplayDriver
KEY
LINE/TV
TUNER
• AUDIO PROCESSING-Audio Decode-Bass Management-Virtual Surround-Preset EQ
etc.
ALRCK
ACLK
ASDAT1
ASDAT0
ASDAT2
ADLRCK
ADMCK1
ADBCK
ADDATA
12.288M
TC7WU04FU
Y,C
V
+9V
EV5V
LRCKOMCLK
USB POWER
USB DPUSB DM BCKO
DATAO
MCKO
FL DC+/-
-25.5V
PCON(fromSMPSorD
DC DET
1.8V
SW
9V
5V
27M
6.8V5V
LINE
SW+10.5V
DVD POWER
+9V
ADMCK0
PWRCONT
SW3.3V(A)V+3
EV+5VV+5
V+1R8
SW5.0VV+5V
SW
SW
SYSTEMµ-com
IC3004
IC3003
IC5501
IC201
DVD MAIN ASSYB
DISPLAY ASSYD
USB ASSY
E
LOAB ASSY
A
FM/AM TUNER UNIT
H
Y , Cb , Cr
1 2 3 4
C
D
F
A
B
E
15
5 6 7 8
HP AMP
HDMI OUT
FRONT L
FRONT R
CENTER
SUB WOOFER
REAR L
REAR R
LINE
LPF
VideoAMP
Y, C
V
Y, C
V
+B+3.3V
MODULATERTAS5508BPAG
DRIVERTAS5122DCA
RESET
PWMA P
PWMB P
SD
PWMA M
PWMB M
ch7 ch8 PWM
HP SEL
HDMITransmitter
TX
LINE
EV5.0V
SW 5.0V
GND +B
SW 3.3V (B)
SW3.3V (A)
SW 6.8V
SW 10.5V
GND
-25.5V
FLDC +-
AC IN
S-Video
Component Video
Composite
MT1392E/C-L
IC3101
IC931
IC3201IC3301IC3401
DAMP ASSYC
POWER SUPPLY UNITG
Y, Cb, Cr Y, Cb, Cr
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36016
1 2 3 4
3.2 LOAB ASSY and OVERALL WIRING CONNECTION DIAGRAM
ADX7480-
PF05PP-B40
CN1
CN1
B2P
-VH
S5B-PH-K-S B5B-PH-K-S
VKN1235
B13B-PH-K-S B13B-PH-K-S
VKN2045 OKN8001
VKN1243
CKS3376-
GN
D+B
AC POWER CORD
LIVE
NEUTRAL
SW3.3V(A)
Pwr-ctr
GND
FL DC+
-25.5V
FL DC-
OWY8087-
FOCS RTN
TRKG RTN
FOCS DRV
TRKG DRV
FOCS RTN
FOCS DRV
TRKG RTN
PICK UP ASSY
TRKG DRVVWG2346-
LOAB ASSY
SW3.3V(A)
FL DC-
GNDD
FL DC+
GND
VSHF
GNDD
LD(780)
PD
LD(650)
Pwr-ctr
-25.5V
GNDD
LD(650)
PD
LD(780)
GNDD
VSHF
SW1 SW1
SW2
GNDD
LOAD+
LOAD-
GNDD
LOAD-
LOAD+
SW2
ST
EP
PIN
G M
OT
OR
4P F
FCST2+(B)
ST2-(~B~)
ST1-(~A~)
ST1+(A) ST1+(A)
ST1-(~A~)
ST2-(~B~)
ST2+(B)
SW6.8V
GND
SW3.3V(B)
SW5.0V
SW10.5V
EV5.0V
AC_DET PG13KK-F22
( )KU,GA BASEEU,J,
TXR
GND
RDS
VSM
GND
SW(DVD/CD)
A
VR650
B
RF
SW5.0V
VR780
EV5.0V
VRCOM
SW6.8V
SW3.3V(B)
SW10.5V SW(DVD/CD)
(AD
D75
45-)
24P
FF
C
A
VR650
B
RF
VR780
VRCOM
D
CAC_DET
EU,J,( )KU,GA BASE
F
VCC
E
VS(VREF)
C
D
VS(VREF)
E
VCC
F
GNDD
DVD LOADER
GNDD
VWT1226-
V+5S
U-
V+
U+ U+
U-
V+
V+5S
W-
12P
FF
C
HB
V
W+
V-
U
SP
IND
LE M
OT
OR
W-
U
V-
W+
V
HB
INSIDE
W W
INSIDE
TXR
VSM
RDS
GND
AM
FMDO
DI
CE
GNDTXL
CLK
+9V
11P FFC
(ADD7543)
+9V
CLK
CE
DI
DO
TXLGND
12
2
1
9
8
13
11
12
10
12
13
1212
13 13
10
11 11
10
11
10
8
9 9
8
9
8
24
21
22
23
20
18
19
15
14
16
17
5 5
3
4
1
2 2
3
4
1
1
3
2
4
3
2
4
5
6
7
6
7
6
7
6
7
5
4 4
5
4
5
2
3
2
3 3
2
1 1 1 1
8
11
9
10
13
11
12
10
9
8
2
3
4
5
7
6
1
2
3
4
1
6
5
9
7
10
8
12
11
12
3
4
7
56
CN
2
CN1
CN601 CN104
CN103
CN3 CN1001
CN101CN102
CN5701
CN6022
1
LOADING MOTOR ASSY : VXX2912
LOAB ASSY(VWG2346)
A
No schematic Diagram
FM/AM TUNER UNIT(AXX7172)
H
B B B( 1/5- 5/5)(AWM8027)
POWER SUPPLY UNIT(AWR7046)
G
DVD MAIN ASSY
1 2 3 4
C
D
F
A
B
E
17
5 6 7 8
Vout
GND
Vcc
RE
MO
CO
NF
LCS
FLC
KF
LDA
TA
VE
+5
GN
DD
FLD
C+
FLD
C-
KE
Y2
KE
Y1
GN
DD
GN
DD
VF
DP
FLD
AT
AF
LCK
FLC
S
VF
DP
GN
DD
VE
+5
GN
DD
KE
Y1
KE
Y2
FLD
C-
FLD
C+
GN
DD
HEAD PHONE
B2P
-VH
AKE7121
AKP7199- AKM7077-
AKP7199- AKM7077-
RPM7540-H9
CK
S33
78-
CK
S33
76-
CK
S33
78-
CK
S33
76-
XKB3062
AKN7003-
AK
P72
10-
GND GND
S_TVOUT_L
LIN1_L
GND
GND
GND
S_TVOUT_R
LIN1_R
FANCONT
RECMUTE
FAN CONT/GND *
S_TVOUT_R
RECMUTE
S_TVOUT_L
GND
GND
LIN1_R
LIN1_L
GND
LRCLK
MCLK
GND
SDATA3
SDATA2
GND
SCLK
SDATA1
GND
LRCLK
SCLK
GND
GND
MCLK
GND
SDATA3
SDATA2
SDATA1
GN
D
+B
*
CN3102 2P
AWK7934AWK7933AWK7932AWK7931
GND
FAN CONT
SW-
SW+
FL-
RL+
C+
C-
RL-
FL+
6ch SP OUT
FR+
RR-
RR+
FR-
SCL
XSD
XOTW
GND
GND
POWER
GND GND
XSD
POWER
GND
GND
SCL
XOTW
XMUTE
3.3V
SDA
GND
HPR
GND
XPDN
GND
XRST
GND
SDA
XMUTE
3.3V
XRST
XPDN
HPR
GND
GND
XHPSEL
PCON
HPL
PCON
HPL
XHPSEL AAV7104(AAV7107)FL
13P FFC(ADD7541)
V5U
SB
GN
DU
SB
HP
_DE
T
HP
_LG
ND
DH
P_R
HP
MU
TE
(ADD7542)U
SB
_DM
2U
SB
_DP
2V
5US
B11P FFC
V5U
SB
V5U
SB
GN
DU
SB
HP
_R
HP
MU
TE
US
B_D
M2
HP
_L
US
B_D
P2
HP
_DE
T
GN
DD
TVIN_R
USB
(RKB1041)
TVIN_L
XKP3086JA602
HP OUT
GN
DU
SB
GN
DU
SB
CLO
CK
SH
IELD
CLO
CK
+D
AT
A0-
DA
TA
0 S
HIE
LDD
AT
A0+
DA
TA
1-D
AT
A1
SH
IELD
DA
TA
1+D
AT
A2-
DA
TA
2 S
HIE
LDD
AT
A2+
+5V
HO
T P
LUG
DE
TE
CT
DD
C/C
EC
GN
D
HD
MIS
CL
CE
CC
LOC
K-
HD
MIS
DA
(AK
P72
11)
HDMI OUTPUT
NC
11
4
3
2
4
3
2
6
7
56
7
5
10
9
8
10
9
8
13
1112
13
1112
15
16
14
15
16
14
17
19
18
19
17
18
21
12
11
5
8
9
6
7
10
2
1
3
4
1 1
4
3
2
4
3
2
65
7
65
7
10
9
8
10
9
8
13
1112
1112
13
15
16
14
15
16
14
17
18
19
18
19
17
3
2
1
4
5
6
9
10
7
8
1311
12 4
12
3 78
56
9
10
10
13 11
12
3
2
1
46
9 7
8
5
8 2
3
4
7
6
11 9
10
5
11
1
7
2
1 11
6
5
4
3
10
9
8
15
16
13
14
1917
1812
CN
3201
CN3211
CN3002 CN3102
CN3001 CN3101
IC5902
CN
5901
CN
5902
CN
5602
CN
5601
JA3111
JA5902
CN
931
XKB3061
Cr
Y
Cb
(VKB1153)
VIDEO
OUTPUT
COMPONENT
JA401
JA402
XKB3059
Y/C
VIDEO
OUTPUT
OUTPUT
S VIDEO
(VKB1178)
V
COMPOSITE
C C C( 1/2- 2/2)DAMP ASSY(AWK7932)
EUSB ASSY(AWU8290)
DDISPLAY ASSY(AWU8289)
÷ When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".
÷ The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
÷ : The power supply is shown with the marked box.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36018
1 2 3 4
3.3 DVD MAIN ASSY (1/5)
USB POWER CONTROL
A13
A15
A14
A9
A8
A12
A10
A11
~B
YT
E~
A16
VS
S
D6
D7
D15
D14
A19
~W
E~
NC
~R
ES
ET
~
NC
NC
A18
RY
/~B
Y~
A6
A4
A5
A7
A17
A3
A1
A2
AYW7096
D12D
5
D13 D
4
VC
C
D10D
3
D11 D
2
D9
D0
D8
D1
VS
S
~O
E~
A0
~C
E~
SW1
SW2
GNDD
LOAD-
LOAD+
to LOAB ASSY
ST1-(~A~)
ST1+(A)
ST2+(B)
to STEPPING MOTOR
ST2-(~B~)
FC
O+
LDO
P
LDO
N
FC
O-
AG
ND
AV
M
TK
O+
TK
O-
SERVO DRIVER
V+5S
U+
U-
V+
V-
VC
C
HU
+
HU
-
HV
+
HV
-
HB
HW
+
HW
-
W-
W+
U
HB
W
V
to SPINDLE MOTOR
INSIDE
FOCS RTN
TRKG RTN
FOCS DRV
TRKG DRV
VSHF
GNDD
LD(650)
LD(780)
PD
VR780
GNDD
SDA
SCL
WP
GND
NC
NC
VCC NC
3.3v
1.8v
IOA19 (PU)
IOA18 (PU)
HIGHA0(PU)
HIG
HA
6(P
U)
HIG
HA
4(P
U)
HIG
HA
3(P
U)
HIG
HA
5(P
U)
HIG
HA
2(P
U)
HIG
HA
1(P
U)
IOA
20
IOA7 (PU)
IOA5 (PU)
IOA6 (PU)
IOA4 (PU)
IOA3 (PU)
IOA2 (PU)
TCK/V_ADIN6 (JTAG)
TDO/V_ADIN7 (JTAG)
DVDD18
65:D
VD
D3
66:IO
WR
#
67:A
16
68:H
IGH
A7(
PU
)
TK
IN
FC
IN
LDIN
DV
CC
SLO
1P
SLG
ND
SLV
DD
SLO
1N
SLI
N2
SLI
N1
SLR
NF
2
SLO
2N
SLO
2P
SLR
NF
1
U
SP
GN
D1 V
SP
VM
1 W
SP
GN
D2
SP
VM
1
SP
RN
F
CT
L1
CT
L2
DG
ND
FG
SP
IN VC
TMS/V_ADIN5 (JTAG)
TDI/V_ADIN4 (JTAG)
FG/V_ADIN8 (PU)
USB_VDD3
USBM
USBP
VPLLVDD3
CAPPAD
USB_VSS
TRO
FOO
VPLLVSS
PWMOUT1/V_ADIN9
TROPENPWM
FMO
OP_INP
OP_INN
DMO
TEO
OP_OUT
TEZISILV
V2REFO
FEO
VREFO
V2O
SGND
RFLV/RFON
CSO/RFOP
(1/2)
(2/2)
6 3
241
5
(1/2)6 3
241
5
SVDD3
LDO1
LDO2
MIDI2
MIDI1
TPI
CDFON
CDFOP
TNI
3.3v
SD
SC
SB
MD
MC
SA
MB
MA
DVDRFIN RF
GC
:254
AV
DD
3:25
6
OS
N:2
53
IRE
F:2
55
DVDC
DVDRFIP
DVDD
AGND
DVDA
DVDB
OS
P
RF
RP
AC
CR
TP
LP
RF
GN
D
HR
FZ
C
RF
RP
DC
VR650
VRCOM
A
B
SW
RF
(2SC4081(QR))
C
D
VCC
E
F
VREF
GNDD
to PICK UP
(2/2)
1.8v
3.3v
CTL
XFLAG
PW
R#
PC
E#
A14
A16
A15
A10
A13
A9
A11
A12
A17
AD
7
A0
AD
6
PW
R#
A20 A19
A5
A18 A8
A7
A6
A3
A2
A4
AD
5
AD
1
AD
3
AD
2
AD
0
AD
4
PR
D#
PC
E#
A1
A16
A14
A15
PW
R#
A10
A13
A11
A12
A9
A20
TROUT
TRIN
LOAD+
LOAD-
LOA
D-
LOA
D+
F+
F-
T+
T-
ST2+
ST1+
ST1-
ST2-
HV-
HU-
HU+
HV+
HW-
W
U
HW+
V
HU
-
HU
+
HV
-
HW
+
HW
-
HV
+
T+
F+
F-
T-
SDA
SCL
ST
1-S
T2+
ST
1+
ST
2-
TRSO
FOSO
TROPEN A19
A8
A18
FMSO
PWMOUT1
ENDM
STBY
A4
A5
A3
A2
A6
A7
TROUT
FG
TRIN
FOSO
TRSO
TROPEN
FMSO
PWMOUT1
DMSO
DMSO
STBY
ENDM
FG
WU V
MDI1
LDO1
E
LDO2
F
LDO2
B
C
RF
D
A
LDO1
SUBCSUBD
SUBBSUBA
MDI1
A
B
IOA
RF
D
C
E
F
IOA
IOA
3
1
2
4
5
13 2
1 2 3 86 74 5
48 47 46 424345 44 41
4
3 2
1
11109 12 15 161413 191817 20 21 23 2422
38 373940 343536 33 2831 293032 26 2527
5
3
4
1
2
4
3
2
1
1 32 64 75 8
1
2
3
4
5
4344 42 3738394041
6
7
8
9
10
11
12
24
22
23
20
21
18
19
16
17
15
14 5 1
2
5
6
7
4
3
2
8 1
63
62
64
65 686766 72 7370 7169 7574
61
59
60
56
57
58
55
53
54
10 11 12
9
14 15 1613 212017 18 19 22
3335 3436 31 3032 29 2627 242528 23
50
51
52
48
49
47
45
44
46
41
43
42
40
38
39
37
35
36
33
34
32
31
29
30
28
27
26
24
25
23
21
20
22
17
19
18
15
16
13
14
10
11
12
8
9
7
5
6
4
2
1
3
253
256
254
255
248
252
250
251
249
247
12
13
11
10
9
8
4 3
7
6
4
5
2
3
1
V+5USB
USBN
USBP
XFLAG
USBPOWER
V+6R8
LIMIT
V+5M
V+5S
V+1R8
V+3
C772C773 C771
IC771
R771
R772 L772
C78
1
C78
3
C78
2
IC781
R285
R284
D781D782
IC20
3
C28
9
L761
C29
6
R28
2
KN103
CN104
R13
1
R13
4R
135
R13
3R
132
R13
6
C15
3
C15
2
C15
1
C10
3
CN103
C13
3
C10
1
IC10
1
C140
C102
C14
1
C14
2
C14
3
CN102
R318
R21
9
R21
8
R208
R15
1
R15
3R
154
R15
2
C10
4
C121
IC204
C290
R23
2
C22
1
C22
0
R21
7
R211
R210C217
C13
1
C13
2
R214
C14
4
C16
1
C20
9
C21
2
C14
5
C14
6
C21
0
C20
8
C21
1
R213
R212
R770 R768
C216
R769
C21
8
R767
C219
R205
R206
R204
R202
R201
C206 C200
C205
C204 C213
C203 C215
R239
R238
Q307
Q307
R32
2
R32
5
C30
9
L308
L309
Q308
C31
0
C344
C345
C347
C343
C346
C207
C21
4
C20
1
C20
2
C26
8
C26
9
R371
R372
R373
R374
Q305R315
R313
Q304R31
4
R375
C371
C373
C372
CN101C374
R32
1
R32
6
C32
0
R31
0Q308
R200
C27
3
R207
C27
1
C27
2
R25
6
C26
7
R25
5
C26
5
0.1/16 1/16
GNDD
AAT4618IGV-0.5-1-TLB
STBY
100k ATL7002-A-T
220
10/5
0
ST
BY
2.2
NJM2845DL-05
V+5USB
***
10k
GNDD
S29
AL0
16D
70T
FI0
10
STBYSTBYGNDD
V+3D
FLA
SH
V+6R8
V+3D
1000
p
1
***
S-24CS04AFJ
STBYGNDD
B5B-PH-K-S
0.01
0.01
0.01
YB
YB
YB
GNDM
VKN1235
GNDD
4.7
4.7
4.7
4.7
4.7
4.7
*** 1
100/
10
BD7995EFS
1
V+5S1
V+6R8
***
***
***
VKN1243
GNDD
100K
VTH1047
10K
10K
STBY
1
V+3DV+3
1.8
1.8
1 1
V+5M
EEPROM
0.1
ST
BY
***
0.1
ST
BY
0.1
STBY
STBY
1
0.1
***
***
2200
p
1000
p
V1P4 0.1
100p
2200
p
2200
p
2200
p
V20
V1P4
2200
p
10K
10K
33
0.1
15k
33
0.1 5600p
15k
51k
51k
22k
22K
100p
1.5K
47/35 0.1
0.1
0.1
0.1
47/35 47/35
HN1A01F(YGR)
HN1A01F(YGR)
4.7
4.7
47/3
5
***
***
HN1A01F(YGR)
47/3
5
GNDD
STBY 0.1
STBY
1
1
1
1
1
ST
BY
220/
6.3
220/
6.3
0.03
3
***
***
***
***
UM5K1N
GNDD
10K
100K
2SC4154(EFG)
10K
***
0.1
STBY
0.1
V+5S
VKN2045-
GNDD
100/6.3
V+5S V20
4.7
4.7
HN1A01F(YGR) ***
V+3
STBY
ST
BY
V+1R8
0.1
STBY
0.1
0.1
0.1
15k
1000
p
V+3
100K
22p
V1P4
OUT IN
3-C1
3-C1
3-B4
3-C2
B 1/5
TR
AV
ER
SE
ME
CH
A A
SS
Y C
N1
SP
IND
LE M
OT
OR
ST
EP
PIN
GM
OT
OR
(RF)
(T)(T)(F)(F)
(S)(S)(S)(S)
LD CURRENTCONTROL
FTS Driver
FLASH
(T)(F)
(T)(F)
(RF)
B 3/5B 3/5
CN
601
A
4
2
1
3
1 2 3 4
C
D
F
A
B
E
19
5 6 7 8
XR
EA
DY
MD
AT
A
SC
LK
AC
K
SD
AT
A
DOWNLOAD
XD
VD
RS
T
XIO
CS
IOA
1
XIO
CE
AD
0
AD
1
DV
SS
AD
2
AD
4
AD
5
AD
3
AD
6
DV
SS
AD
7
ALE
IOA
21
3.3v
1.8v
*1
*1
1.8v
3.3v
DV
DD
18
IOA
0
A17
UR
D#
UW
R#
DV
DD
3
UP
1_4
(PU
)
UP
1_3
(PU
)
UP
1_2
(PU
)
UP
3_0
(PU
)
UP
1_7
(PU
)
UP
1_5
(PU
)
UP
1_6
(PU
)
ICE
(P
D)
XP
RS
T
UP
3_4
(PU
)
UP
3_5
(PU
)
UP
3_1
(PU
)
IR XIN
T0
IO_1
9
DQ
M0
RD
6
RD
7
RD
4
RD
5
DV
DD
3
RD
3
RD
0
RD
1
RD
2
RD
14
RD
13
RD
15
RD
12
DVDD3
RD8
IO_18
126:
RD
11
127:
RD
10
128:
RD
9
DQM1
XCAS
XRWE
XRAS
BA0
BA1
XRCS
RA10
RA0
RA2
RA1
DVDD18
DVDD3
RA3
DVSS
CKE
RA11
RCLK
RA7
RA4
Y7/IO_16
DVDD3
RA6
RA5
Y6/IO_16
RA9
RA8
C7/IO_7
C6/IO_6
DVDD18
Y5/IO_14
Y4/IO_13
Y3/IO12
YUVCLK/IO_8
Y2/IO11
Y2/IO10
Y1/IO9
AD
CV
SS
RF
VD
D3
AD
CV
DD
3
LPF
ON
PLL
VD
D3
LPF
IP
LPF
OP
LPF
IN
JIT
FO
JIT
FN
IDA
CE
XLP
PLL
VS
S
RF
VD
D18
XT
ALI
XT
ALO
RF
GN
D18
C5/IO_5
DVDD3
IO_17
C0/IO_0
C2/IO_2
C3/IO_3
C4/IO_4
DVDD18
C1/IO_1
YUV6/R
YUV5/B
VSYNC/V_ADIN1
DACVSSA
YUV4/GYUV1/Y:191
DACVDDB:190
DVSS
HSYNC/VADIN2
YUV7
DACVDDADACVSSC:192
YUV2/C:189
AL/
SD
AT
A2
ALF
/(C
TR
)
ALS
/SD
AT
A0
AR
/SD
AT
A1
AR
S/S
DA
TA
3
AD
AC
VD
D2
AD
AC
VD
D1
AR
F(S
W)
AV
CM
AP
LLC
AP
AD
AC
VS
S2
AD
AC
VS
S1
AP
LLC
SS
SP
DIF
MC
_DA
TA
DV
DD
18
AS
DA
TA
4
AP
LLV
DD
3
AC
LK
AB
CK
ALR
CK
AS
DA
TA
3
SP
BC
LK
SP
DA
TA
SP
LRC
K
DV
DD
3
AS
DA
TA
1/G
PO
_1
AS
DA
TA
2/G
PO
_0
YUV3/CVBS
RC
LKB
/GP
IO_5
RV
RE
F/G
PIO
_6
AS
DA
TA
0/G
PO
_2
DACVSSB
SP
MC
LK
GP
IO_4
GP
IO_3
DA
CV
DD
C
VR
EF
FS
YU
V0/
CIN
VSS
VSSQ
DQ14
DQ15
VCC
VCCQ
DQ1
DQ0
DQ13
VCCQ
DQ12
VSSQ
DQ11
DQ10
DQ8
VCCQ
DQ9
DQ3
DQ2
VSSQ
VCCQ
DQ4
DQ5
DQ6
DQ7
VSSQ
VSS
NC
UDQM
NC
CLK
CKE
A11
A9
A8
VCC
LDQM
WE
CS
RAS
CAS
BA0
BA1
A10/AP
A6
A7
A5
VSS
A4
A0
A1
A2
VCC
A3
3.3v
1.8v
CH:CCSRCH~OTHERS:CKSRYB~
:1608 Size
: 2125 SizeCKSQ**~
CAPACITOR
:1608 Size
RS1/10S***J
(F):RS1/16S****FOTHERS:RS1/16S***J
1.8v
*1
*1*1
3.3v
1.8v
3.3v
RESISTOR: 2125 Size
Chip Size
to VIDEO PART
(Page 2/2)
to AUDIO PART
(Page 2/2)
78
PR
D#
A1
PC
E#
AD
0
AD
2
AD
1
AD
5
AD
6
AD
4
AD
3
A17
AD
7
50 6751 49 80
A0 SD
A
HD
MIS
CL
SC
L
HD
MIS
DA
XD
VD
RS
TIN
T0#
HDMI
TX
D
RX
D
DQ
M0
DQ
7
DQ
4
DQ
3
DQ
6
DQ
5
DQ
1
DQ
0
DQ
2
DQ
15
DQ
12
DQ
14D
Q13
DQ
11
DQ
9
DQ
10
DQ14
DQ15
DQ6
DQ7
DQ8
DQ12
DQ13
DQ11
DQ10DQ9
DQ8
DQ5
DQ4
DQ3
DQ2
DQ0
DQ1
DWE#
DQM1
DCAS#
DCS#
DRAS#
DBA0
DBA1
MA10
MA0
DQM1
SDCKE
SDCLK
MA8
MA11
MA9
DWE#
DQM0
DRAS#
DCS#
DCAS#
MA10
DBA1
DBA0
MA1
MA2
MA3
SDCLK
SDCKE
MA11
MA6
MA7
MA5
MA4
MA1
MA0
MA2
MA3
MA9
MA8
MA7
MA4
MA5
MA6
Y6
Y7
Y4
Y5
Y3
Y2
Y1
C7
VCK
Y0
C3
C4
C5
C6
C0
C2
C1
VSEL1
VSEL2
B_CB
R_CR
G_CY
VSYNC
HSYNC
S_C
CVBS
S_Y
I/XP
SQ
UE
EZ
E
LET
TE
R
HS
PD
IF
AS
PD
IF
ALR
CK
AB
CK
AC
LK
HC
LK
AD
DA
TA
AS
DA
T2
AS
DA
T1
AS
DA
T0
PRDN
XOPUSEL
1 32 4
7776 78 818079 8685848382 87 908988 949391 92 9895 96 97 99
101
100
103
102
106
105
107
104
108
110
111
112
109
113
114
116
115
120
119
118
117
123
124
122
125
121
128
126
127
131
130
129
134
135
140
139
138
137
136
133
132
145
144
147
146
149
141
142
143
148
151
153
152
154
155
156
157
158
150
167
164
159
160
161
162
163
166
165
244
245
246
240
243
242
241
235
239
237
238
236
232
233
234
231
171
170
169
168
173
172
176
174
175
181
180
178
179
183
186
184
185
182
177
228
227
230
229
224
223
222
226
225
219
220
218
221
214
215
216
217
212
209
211
210
213
205
207
206
208
187
188
189
190
192
191
202
204
203
201
197
196
199
200
198
194
195
193
54
53
52
51
1
2
3
4
50
49
48
45
47
46
43
44
42
7
6
5
10
9
8
11
13
12
40
41
38
39
36
37
35
34
33
32
14
15
17
16
18
19
20
23
22
21
29
30
31
28
26
25
24
27
41 3
52
LIM
IT
UCOM
HDMI
VIDEO
AUDIO
R29
1
R29
2
R21
5
R21
6
CN204
R29
3
R29
4
R23
3 R22
4
C22
4
R23
4
R22
1
R23
7
R26
3
R26
0
R25
9
R25
8
R26
2
R22
2
R26
1
R22
3
R27
2
C22
5
R23
5
C22
6
R23
6
R22
0 C22
9
C22
7
IC201
C24
0
C24
1
C24
2C
222
R23
0 C24
5
C285
KN202
C286
IC20
2
C287
C288
C230
R225
R226
R227
C284
C231
R228C232 R229
C281
C28
2
C283
C233
R28
1
C234
R266
R271
R267
C235
C236
R265
R264
C244
C243
C26
6
C25
8
C25
9
C26
0
C23
8
C25
6
C26
4
R254C25
5
C26
2
C254
R25
2
R251
R25
3
C25
1
X201 C25
2
C26
1
C22
3
C22
8
C23
9
C24
7
C24
8
C24
6
R27
9 C25
0
R24
8
R24
2
R24
3
R25
0
R24
1
R24
0
R24
7
R24
5
R24
6
R24
4
C27
0
R257
IC205
R269
C23
7
R209
GNDD
6.8k
3.3k
GNDD
6.8k
3.3k
B4B-PH-K-SGNDD
V+3DR
3.3k
6.8k
0
33 33 33 33 333333 33
33 33k
0.1
0.1
4.7k
0.01
ST
BY
0.122
0p
ST
BY
MT1389FE/H-L
0.1
GNDD
0.1
GNDD STBY
0.1
0.1
64M
SD
-RA
M
0.1
HY
57V
6416
20E
TP
-H
0.1
0.133*4
RAB4C330J
0
33
0.1
0.1 33
33220/6.3
1
0.1
0.1
ST
BY
V+3D V+3DR
RAB4C330J-T
0.1
0
RAB4C330J-T
0.1
0.1
RAB4C330J-T
RAB4C330J-T
0.1
0.1
0.04
7
0.04
7
0.1
0.1
750K
0.1
10/5
0
0.47
10/5
0
1000p
0
100K
680
GNDD9p
VSS1168
12p
ST
BY
10/5
0
10/5
0S
TB
Y
0.1
10/5
0
0.1
0.1
10k
0.1
0.1
0.1
2.2k1
GNDD
33
10
ST
BY
33
3333 33
ST
BY
STBY
V+3
0.1
220/
6.3
STBY
V+3
3-A1,5-A2
2-A1
4-A1
R222
R263
R262
R248
R243
R247
R240
R269
R257
*1
33
0
0
0
33
33
33
10
0
KUC
B 1/5
: VIDEO SIGNAL ROUTE (S_Y): VIDEO SIGNAL ROUTE(C/V)
(S_Y)
: VIDEO SIGNAL ROUTE (S_C)
: AUDIO DATA SIGNAL ROUTE
(S_C)
: VIDEO SIGNAL ROUTE (R/Cr)(R/Cr)
: VIDEO SIGNAL ROUTE (G/Y)(G/Y)
: VIDEO SIGNAL ROUTE (B/Cb)(B/Cb)
(AD)
: VIDEO/AUDIO SIGNAL ROUTE (HDMI)(HDMI)
: FOCUS SERVO LOOP LINE: TRACKING SERVO LOOP LINE: STEPPING SERVO LOOP LINE
(F)
(RF) : RF SIGNAL ROUTE
(T)
(S)(C/V)
DVD BE
(S_Y)
(S_C)
(C/V)
(G/Y)
(B/Cb)
(MDMI)
(MDMI)
(R/Cr)
(AD)
(AD
)
B 3/5,5/5
B 2/5,3/5,5/5
B 2/5
B 4/5
B 1/5 DVD MAIN ASSY(AWM8027)
11 13 12 14
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36020
1 2 3 4
3.4 DVD MAIN ASSY (2/5)
HDMI
AUDIO
V+3
XOPRDN
XDVDRST
INT0#
SCLSDA
Y6Y7
Y5Y4Y3Y2
Y0Y1
VCK
C7
C4
C6C5
C0
C2C1
C3
VS
YN
CH
SY
NC
PUSEL
HDMISDA
HDMISCL
HS
PD
IF
HC
LK
C940
IC932
R904
R903
R905
R902R901
C942
R931
C98
7
R91
5
R91
4 C93
6
R93
7
R93
6
R93
8
R93
9
R94
0
C94
3
R94
5
R93
5
R94
3
R94
4
C94
5C
946
IC931
R91
1
R90
6
R934
R93
3
C94
4
C98
5 L937
C931
C93
5
C93
2
C93
3
C93
4
L931
C95
5
C95
3
C95
4
C95
6
L936
3
4 5
6
1
2
8
7
22
19
20
21 28272524 2623 29 3230 33 34 3531
18
16
17
15
14
13
12
10
11
37 38 39 4036
42
41
43
45
44
46
50
51
47
49
48
9
7
8
6
5
4
3
2
1
80 777879 7576 7374 7172 70 69 68 67
55
54
52
53
56
57
58
59
60
66 65 63 6264 61
GNDD
STBY
STBY
00.1
1k10k
0.1
GNDD
STBY
STBY
STBY
STBYSTBY
GNDD 0.1
ST
BY
ST
BY
ST
BY
ST
BY
ST
BY
ST
BY
ST
BY
ST
BY
ST
BY
MT1392E/C-L
5600
p
GNDD
0.1
1000
p
0.1
(F)510
560
0.1
V+3R3TX
0.1
AT
L7010
V+3
10 10
V+3R3HD
GNDD
V+1R8
0.1
47/3
5
0.1
1000
pATL7010
V+3R3HD
GNDD
0.1
47/3
5
0.1
1000
p
ATL7010
V+3R3TX
1-D6
EEPROM
SS
D
SS
CK
Y7
Y6
DV
SS
INT
CLK
RS
T
PW
DN
DV
DD
18
MS
D/G
PO
6
MS
CK
/GP
O5
TR
AP
0/G
PO
4
TR
AP
1/G
PO
3
TR
AP
2/G
PO
2
A6/
GP
O1
A7/
GP
O0
Y5
Y4
Y3
Y2
Y1
Y0
DVSS
VCK
DVDD33
HDMI Transmitter
HT
PLG
GP
O10
GP
O9
GP
O8
GP
O7 AVSS
PLLC0
PLLC1
AVDD
AVDD
AVSS
AVSS
TCK-
TCK+
AVDD
TX0-
C7
C6
C5
C3
C4
C2
C1
C0
DVSS DV
DD
18
AB
CK
ALR
CK
AV
DD
AV
SS
SP
DIF
AC
K
AD
1
AD
0
AD
3
AD
2 R B G
TX1-
TX1+
AVDD
TX0+
AVSS
TX2-
TX2+
AVSS
SWING
AV
DD
VR
EF
AV
SS
AV
DD
AV
SS
FS
YU
V6
YU
V5
YU
V4
AB 2/5
B 1/5,3/5,5/5
B 1/5
1 2 3 4
C
D
F
A
B
E
21
5 6 7 8
DVDPOWER
V+6R8
R94
1
R94
2
VA
901
VA
902
D933
R970
R961
R959
R960
Q934
R962
Q933
R967
R968
R971
Q935
Q936
R963
Q934
VA
931
R950 C950
VA
933
VA
935
VA
938
VA
937
VA
934
VA
932
VA
936 R975
R974
R958
R957
R956
L935
R949 C949
R948 C948
R947 C947
R955
R954
R953L933
L934
R951
R952
L932
C98
4
C98
2
C98
3
R969
R966
VA
903
Q935
R964
R965
C95
1
C95
2
R972
R973
CN931
IC981
234
4 1
1
3
4
2
13 2
2
4
3
1
19
18
16
13
15
14
17
9
1112
10
65
4
87
21
3
4
5
2
3
1
ST
BY
ST
BY
V+3
ST
BY
ST
BY
UDZS5R1(B)
RT1N144M
1k
GNDD
4.7k
4.7k
2.7k
V+5HDUMB1N
2.7k
ST
BY
ST
BY
ST
BY
STBY
STBY
ST
BY
UMB1N
V+5HD
GNDD
ST
BY
*8
STBY STBY
STBY STBY
STBY
STBY
V+5HD
STBY STBY
STBYSTBY
ATH7022 *4
0.12.
2
GNDD
ST
BY
47k
ST
BY
STBY
ST
BY
ST
BY
GNDD
0.1
10/5
0
0
ST
BY
AKP7210
NJM2872BF05
1
V+5HD V+6R8
(DTC114YUA)
STBY
HOT PLUG DETECT+5V
NCCEC
DDC/CEC GNDHDMISDAHDMISCL
CLOCK-CLOCK SHIELDCLOCK+DATA0-
DATA1 SHIELD
DATA0+DATA0 SHIELD
DATA1+
DATA1-
DATA2-DATA2 SHIELDDATA2+
(AKP7211)
Nr
Vout
VC
GND
Vin
(AWM8027)B 2/5 DVD MAIN ASSY
B 2/5
B 3/5,4/5
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36022
1 2 3 4
3.5 DVD MAIN ASSY (3/5)
LC875C96BPDC133A
132
6919
83
312930
2827
2425
23
2122
201917
69
67
4
23
1
3533
31 32 34
3837 41 4645 47
4948 525150
DS
PM
UT
E 72 84
72
4
6058
61
57
66
1762
6867
60
6858
7069
71
57
77
7978
22
80
DSPUCOM
96
100 99 98
87 8486 83 82
REMOUT
HP_L
HP_R
USBP
USBN
V+5USB
XFLAG
XTVMUTE
REMOCON
UCOM
DVDPOWER
13
12
10
11
9
87
65
4
3
21
21
4
3
65
87
11
10
9
E
BC
E
BC
31 343332
2930
2827
35 3736 38 39 40 41 4342 44 474645 48 49 50
5152
5453
2625
2422
2321
20
5655
5759
5861
60
1918
1617
1514
6362
6465
6667
1312
1110
98
6869
7170
7274
73
67
43
51
2
7576
7778
8079
100 979899 9396 9495 92 91 90 878889 86 85 84 818283
1 2
43
5
7
64
53
1
2
C5601
KN5601
C56
06
C5602
C5603
C5605
R55
43
R3952
CN5602C5604
C3952
C3951
R3951
C3954
L3952
R3954
L3951
C3953
CN5601R3953
Q3951
R39
55
R5527
C55
19
C5522
R5525
R5522R5521
R55
15
R55
16
R55
13
R55
14
R5519
C5521
R5518 R5517
C5517
C5518R5569
X5501C5509
C55
25 Q5525
C5508
C5504
R5507
R5506
R5505
C5524
R55
10
C5503 R5508
R5503
R5500
R5501
R55
44
R55
41
R55
42
R55
31
R55
32
R55
33
R55
34
R55
35
R55
37R
5536
R55
38
C55
39
R55
45
R55
48
R55
46
R55
47
C5555
R5557
R5562
R5512 IC5501
C5569
C5577R
5598
C55
89
R55
87
R55
96
R55
97
C5578
R55
84
R55
86
R55
83
R55
81
R55
82C55
79
R5566R5563
R5570
R5577
KN5501
C55
01
R55
09
IC55
03
C55
97
CN5501
R55
90
R55
74
C55
02
VFDP STBY
1000p
GNDD
ST
BY
FLDC- FLDC+
1000p
1000p
STBY
STBY
*1
GNDD
CKS3378-
VE+5
100/16
47k
100/16
47k
STBY
STBY
CTF1346-
V+5USB
STBY
STBY CTF1346-
CKS3376- GNDD
RT1N241M
1.8k
RAB4C221J220
STBY
GNDDVE+5
0.01
0.01
0.1
RAB4C221J
220
220
** 10k
1MRAB4C221J
220
0.01
VE+5
* *
VE+5 0.01
0.01220
ASS703410MHz
VU+5 0.1/16
GNDD
ST
BY
RT1N431M
10/50
0.01
220
220
220
47k
STBY 2.2K
STBY
STBY
220RAB4C221J
GNDD
RA
B4C
221J
RA
B4C
221J
*1 ST
BY
ST
BY
ST
BY
ST
BY
*1 220
0.1/
16
ST
BY
*1 *1
220
ST
BY
GNDD
RA
B4C
221J
GNDD
10k
10k22
0
STBY
VE+5
0.1/16
220
RAB4C221J
220
220
0.01
0.01
RA
B4C
221J
220
ST
BY
0.115
K
0.01
1000
p
220
10k
220
220
10k
RAB4C221J
220
RAB4C221J
RAB4C221J
220
STBY
ST
BY
0
VU+5
GNDD
VE+5
ST
BY
ST
BY
52045-0745
VE+5
RA
B4C
221J
ST
BY
220
ST
BY
100k
100/
10
VE+5
3-A5
5-A1
5-A1
1-D1
1-D1
1-D2
4-C5
3-B5
1-D6,5-A2
CHASSIS GND
FLDATA
FLCK
FLCS
REMOCON
VFDP
FLDC-
VE+5
FLDC+
GNDD
KEY1
GNDD
GNDD
KEY2 R5598R5543
R5544
0STBY
0
R5531R5522
R5542R5538
R5537
GNDUSB
USB_DM2
V5USB
USB_DP2
*1
V5USB
GNDUSB
HP_DET
HP_R
HP_L
HPMUTE
GNDD
(DTC124EUA)
DE
ST
INA
TIO
N
MO
DE
L
(DTC143EUA)
EU
RESET
STBY
STBYSTBY
STBY0
*1
AC
DE
T
PW
RC
ON
TSTEST
UTEST
INPUTSELB
INPUTSELA
DASCK
DASDA
LED
DS
PM
UT
E
XD
EC
MU
TE
DS
PH
RE
Q
VS
S4
VD
D4
BU
SY
XF
LAG
ST
ES
T
UT
ES
T
XD
SP
SS
XD
SP
RS
T
SCLK
NC
NC
TXCE
XTVMUTE
DSPCK
*1
DSPDO
DSPDI
XPROTECT
PCONFIG
DA
TA
SE
LD
SP
MO
DE
AD
MD
XR
EC
MU
TE
XA
DP
DN
XH
PM
UT
E
SD
AT
AM
DA
TA
VSS2
VDD2
EEP_CS
EEP_DO
EEP_SK
NC
DIRERR
KEY2
KEY1
VDET
MODEL
VDD1
SIMUKE
TXODATA
TXCLK
RDSPOW
NC
TXIDATA
RDSDATA
TEST POINTSHORT for
CF2
CF1
XT2
VSS1
XT1
XRESET
XD
IRC
S
XD
IRR
ST
µ-COM
PW
RC
ON
T
(DT
SM
IX)
KEY1
DVDACK
EEP_DI
XDARST
XDAPDN
DV
DP
OW
ER
XDAMUTE
USBPOWER
RDSCLK
REMOCON
ACDET
P_ON
FLCLK
XFLCS
FA
NC
ON
T
VS
S3
VD
D3
(SW
MIX
)
(DM
UT
EC
HE
CK
)D
IRD
O
BE
AT
CU
T2
FLA
SH
CLK
FLA
SH
DO
FLA
SH
E/D
HP
DE
T
(TX
PO
WE
R)
HP
SE
L
SR+TX
DIGSEL
BE
AT
CU
T1
SHUTDWN
SR+RX
FLC
ON
T
XREADY
XOTW
XDVDRSTFLDAT
*1
CHASSIS GND
XPROTECT
STBY
NC
VSS
RST
VCC
WDD
WEN/DI
WCLK
DOWNLOADµ-COM
KUC BASE
R5516
R5515
R5513
R5514
AMW
33k
15k
8027
68k
39k
UPPER/KUCXJ
AB 3/5
CN
5901
DC
N59
02E
B 2/5,4/5
B 1/5
B 5/5
B 1/5
B 1/5,5/5
1 2 3 4
C
D
F
A
B
E
23
5 6 7 8
DVDPOWER
V+1R8
V+3
USBPOWER
V+5
V+3R3
V+5V
V+5MV+5S
REMOCON
V+10
VE+5
V+6R8
REMOUT
4
5
2
3
E
1
E
CB B C
GS D
4
3
2
1
7
5
6
8
B
EC
14
9
12
13
9
10
13
11
12
10
11
E
B C6
7
5
6
7
88
5
4
3 3
2
1
4
1
2
C11
03
C11
02
C11
01
R1101IC1101
C15
05
C15
01
C15
02
D1501 C
1301
R1307
Q1201
R12
02
C12
01
C12
02
R12
04
R55
58
C55
58
D12
01
C12
03
L1501
R1306Q1304
R1304
R13
03
C12
04
R12
01
Q1202
R1305 L1305 Q1302
C80
1
R55
59 IC5502
C14
15
D14
15
D1417 R
1415
Q1413
C55
57
D802
R80
1
R1404
C14
13
R1403
R1401
Q1402
R1402
D14
03
R1001
KN1001
Q1303
R1302
R13
01Q1301
CN1002CN1001
D1416
R59
43
GNDM GNDD
47/3
5
ST
BY
NJM2846DL3-18V+1R8
GNDD
1
GNDD
GNDD
220
100/
10
0.01 0.1
LAU-TA
22
ST
BY 1
4.7k
RT1N141-11
GNDD
ST
BY
1
ST
BY
V+3
47k
47p
CH
GNDD
470k
MA
111
ST
BY
VE+5VU+5
10k 2SC4154(EFG)
560(1/10W)
47k
0.05
6
10k
RSR015P03
STBY VTL1095
V+5M V+5S V+5V
2SA1577(QR)
GNDD
ST
BY
GNDD
47k
S-93C46BD01-J8T1
GNDD
ST
BY
*3
*3
1.8k
RT1N241M
0.1/
16
MA
111 4.7k
V+5V
V+3R3
39k
VE+5
GNDD
V+3V+5V
V+5S V+5M
*3
47K
2SA1602A
3.3k
MC
2846
-11
3.9k
FLDC-
STBY
FLDC+ VFDP
STBY
2SC4154(BFG)
3.9k
V+3R3
47k
V+6R8
V+5
2SA1602A(EF)B14B-PH-K-S
V+10B13B-PH-K-S
V+10
V+5 VE+5
V+6R8
*3
V+3R3
V+10
V+10 V+6R8V+5
01-D2
3-B1
3-D1
BACK END IC
HDMI
(2SC4081(QR))
(DTC114EUA)
SDRAM BACK END IC
HDMI FLASH ROM
DO
µcom
µcom FL DRIVER
FTS DRIVER PU VIDEO DRIVER INPUT SELECTOR
GND
SK
DIEEPROM
CS
(DTC124EUA)
NC
TEST
VCC
FL
BEAT_CUT
CHASSIS GND
FL DC-
-25.5V
FL DC+
GND
(2SC4081(QR))DATA SELECTOR
A/D
MODULATOR
DSP
SW3.3V(A)
SW3.3V(B)
Pwr-ctr
GND
SW6.8V
USB BUS
FTS DRIVER
HDMI
SW5.0V
AC_DET
EV5.0V
SW10.5V
(2SA1576A(QR))
SUPPLY
SCART
AUDIO BUFFER
KUC
TX
CN1001
SCART POWER GA MIDGA UPPER
: 1608 SizeCCSR**~
CN1002
CKSR**~
CAPACITOR
: 2125 SizeCKSQ**~
RS1/16S~: 1608 Size
RS1/10S~
RESISTORChip Size
: 2125 Size
PROTECT
*3
STBY4.7BUDZS
STBY
C1413D1415 D1417D1416
KUC GA BASE
B 3/5
B 3/5
DVD MAIN ASSY
CN
3G
(AWM8027)
B 2/5,4/5
B 1/5
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36024
1 2 3 4
3.6 DVD MAIN ASSY (4/5)
R416
R436C457
C416
R415 R435
C455
C415
R414
R434C453
R413
R433C451
C414
C405
C404
C403
C40
2
C40
1
R412 R432
C449
C413
C412
R431
R411 C447
C411
IC401
R40
5
VIDEO
V+5V
STBY
150(F)
STBY
0.1
GNDD
150(F)
STBY
STBY
STBY
STBY
0.1
150(F)
STBY
150(F)
STBY
1
1
GNDD
0.1
22/25
STBY
100/
16
150(F)
STBY
STBY
1
150(F)
STBY
STBY
0.1
MM1623BF-TBB
0.1
ST
BY
V+5V
1-A6
14
13
15
16
12
11
10
9
7
8
20
22
19
18
21
17
5
6
2
3
4
1
24
23
26
27
25
28
CCSR**~CKSR**~
CAPACITOR
: 1608 Size
: 2125 SizeCKSQ**~
RS1/16S~: 1608 Size
RESISTORChip Size
: 2125 SizeRS1/10S~
MUTE2
Cr/R in
R/Cr out
GND2
Cb/B in
CLP B/Cb out
CY/G in
I/P G/CY out
GND1
BIAS
GND2
Y out
GND2
GND2
V in
Y in
YC MIX
MUTE1
C in
VCC1
S1
S2
V out
DC out
C out
VCC2
from DVD PART(Page 1/4)
(MM1758XF-TBB)
I/XP
LETTER
SQUEEZE
R_CR
B_CB
G_CY
CVBS
S_Y
S_C
R402
C4060.1
10K
R406
B 4/5
VIDEO AMP
: VIDEO SIGNAL ROUTE (S_Y): VIDEO SIGNAL ROUTE(C/V)
(S_Y)
: VIDEO SIGNAL ROUTE (S_C)
: AUDIO DATA SIGNAL ROUTE
(S_C)
(S_C)
(S_Y)
(G)
(B)
(R)
(C/V)
: VIDEO SIGNAL ROUTE (R)(R)
: VIDEO SIGNAL ROUTE (G)(G)
: VIDEO SIGNAL ROUTE (B)(B)
(AD)
(C/V)
10 8
9
B 1/5
1 2 3 4
C
D
F
A
B
E
25
5 6 7 8
C429
R424
1000/6.3(F)750 C424
STBY
C425
R426
R425
C426
JA402
STBY75 (F)
(F)75STBY
XKB3061
4
1
2
3
OUTPUTCb
Y
Cr
(VKB1153)
COMPONENT
VIDEO
R423
C423
C428
R422 C422
C427 R421 C421
JA401
1000/6.3
1000/6.3
STBY
(F)75
(F)75STBY
75 (F) STBY
XKB3059
5
2
4
3
7
1
6
S VIDEO
OUTPUT
VIDEOOUTPUT
COMPOSITE
(VKB1178)
Y/C
V
R9402
C430
L421
C431
L422
470/6.3
470/6.3
CTF1389-
CTF1389-
KUCEU,GA
GNDD
B 4/5
(C/V)
B 4/5 DVD MAIN ASSY (AWM8027)
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36026
1 2 3 4
3.7 DVD MAIN ASSY (5/5)
TVOUT_R
TVOUT_L
HP_R
HP_L
V+3R3
V+5
UCOM
V+10
66616252
96
BCKO
LRCKO
MCKO
ASDAT2
ASDAT1
DATA0
84
7779
2930
28
7127
DSPMUTE
70
8221
11
10
8
9
7
56
3
4 B2
E2
C2
12 E
BC
5
3
6
4
21
12
9
8
11
10
7
13
17
18
14
15
16
19
21
5
4
3
64 52 31 87
1416 15 13 12 11 910
C2B2
E2
11
6
10
9
87
14
12
13
17
18
15
16
19
BC
E
C57
04
C57
05 C57
09
C57
01
C57
03
C57
02 R57
05
C57
07
C57
08
R5718
R5717Q5703
CN5701
R57
13
R57
12
R5716
R5715
R5714
R57
07
Q5703
R57
02
R30
20
R57
01
C3020
C3019
R30
19
R3008
R3012C3012
C3011 R3011
CN3002KN3001
R3002
R3082
R30
18R
3017
R30
14R
3013
C30
04
Q3005
R3010
C30
01
C30
02
IC30
01
R3027
R30
22
C30
22
R30
40
R3024
R30
26
C302422
0/6
.3
R30
25
R3081 R3001
CN3001
C30
03
R3009
Q3005
R30
21
R30
39
R3023
C3023
C3021
4-C6
4-C6
3-D1
3-C1
1-D6,3-A1
GNDD
ST
BY
ST
BY
ST
BY
100p
100p
ST
BY
ST
BY
47/3
5
1000
p
CH
CH
STBY
STBY
STBY
RT3CLLM(EF)
CKS3376
*1
STBY
STBY
*1
ST
BY
RT3CLLM(EF)
GNDDST
BY
V+10
10/50
*2
ST
BY 10/50
*2
GNDD
STBY
22k
22k
10/50
10/50
AKP7199-ASTBY STBY
1M
VREF
22k
22k
VREF
GNDD
22k
22k
VREF
VREF
1k
Sub
:HE
F40
52B
T
RT3AMMM
0.01ST
BY
47k
ST
BY
220k 0.1
15k
V+10
1k
1k1k
1MSTBY
AKP7199-A
V+3R3
V+5
1k
RT3AMMM
220k
ST
BY
VREF
15k
V+5
GNDD
1k
47/35
V+10
0.1
GND
RDS
VSM
TXR
+9V
TXL
DO
CLK
GND
(HN1C01FU)
(2/2)
CE
DI(HN1C01FU)
STBY
GND
FANCONT
GND
S_TVOUT_R
S_TVOUT_L
RECMUTE
GND
GND
GND
LRCLK
SCLK
LIN1_R
LIN1_L
MCLK
GND
SDATA1
GND
SDATA2
SDATA3
CHASSIS GND
GND
GND
POWER
XSD
XOTW
PWRCONT
LINE
SCART
L
HH
H
(1/2)
MICOUT
INP
UT
SE
LAIN
PU
TS
ELB
INH
Y2
Y0
Y3
Y1
Y(R
ch)
Mai
n:T
C40
52B
FN
VE
E
(HN1A01FU(YGR))
VS
S
VD
D
X(L
ch)
X1
X2
X0
X3 A B
(2/2)
GND
SCL
SDA
GND
XMUTE
XPDN
H
L TUNER
MCACCL
L
A FUNCTIONB
SELECTOR
HPL
HPR
GND
GND
XRST
XHPSEL
3.3V AUDIO INPUT
PCON
from Ucom PART
(HN1A01FU(YGR))
(1/2)
R5713
R5712
*1R3020
*2
R3019
J,KUCGA
47k
0
J,KUC
0
GA
B 5/5
C1/2
CN
3101
C1/2
CN
3102
B 4/5
B 3/5
(AD)
to T
UN
ER
MO
DU
LE
1 2 3 4
C
D
F
A
B
E
27
5 6 7 8
AUDIO
DATA0
LRCKO
ASDAT0
ADLRCK
ADDATA
ALRCK
48
MCKO
ACLK
ADMCK1
ABCK
ADBCK
BCKO
34
ADMCK1
ADMCK0
ADDATA
ADLRCK
ADBCK
ADMCK0
8
7
6
4
5
3
1
2
4
3
1
2
9
11
10
13
12
14
16
15
5
6
8
7
8
7
9
10
5
6
12
11
4
3 14
13
2
1 16
15
R39
15
R3063
R3062
R3061
IC3005
C30
56
C3026
R30
56
R30
46
C3045
R3045
C30
46
R3057
R3066
R3065
C3064
R30
64
C30
57
X3004
R3055
R3054
R3053
IC3004
C3052R30
52
C30
48
R30
73
R3049
C3025
C30
42
C3041
C3043
C30
44
R30
41
R30
60
R3048
IC3003
47k
VREF
220
GNDD
220
220
TC74VHC157FTS1
CH27
p
10/50
GNDD
100
ST
BY
10/50
STBY
0.1
100
220
0.1
ST
BY
V+3R3
GNDD
27p
CH
VSS1140
12.288M
1M
100
GNDD
100
0
0.1
TC7WU04FU 0
RAB4C101J-T
0.01
100
3.3k
010/50
V+3R3
2.2/50
10/50
0.1
0.1
ST
BY
V+5
1.8k
AK5358ET
CKSR**~
CAPACITOR
RS1/16S~
:1608 SizeCCSR**~
: 2125 SizeCKSQ**~
GND
VCC
DA
TA
SE
L
DATA SELECTOR
GND
RESISTORChip Size
: 2125 Size
:1608 Size
RS1/10S~
ST
XA
DP
DN
VCC
SDTO
LRCK
DGND
VD
*
VA
AGND
MCLK
SCLK
VCOM
CKS1
PDN
DIF
AINL
AINR
CKS2
CKS0
A/D
from DVD,PART
B 5/5(AD)
(AD)
(AD)(AD)
(AD)
(AD)
: AUDIO DATA SIGNAL ROUTE
B 5/5 DVD MAIN ASSY (AWM8027)
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36028
1 2 3 4
3.8 DAMP ASSY (1/2)
LINE_OUT_L
LINE_OUT_R
LINE_IN_L
LINE_IN_R
XSD
XOTW
PCON
+
-
+
-
XRST
TAS5508
SC
LS
DA
SC
LKLR
CLK
XRST
SCL
SDA
LRCLKSCLK
SDATA3SDATA2SDATA1
SCLSDA
XMUTE
XPDNXMUTE
XHPSEL
PW
M_H
PM
LP
WM
_HP
PR
PW
M_H
PP
L
PW
M_H
PM
R
MC
LK
XPDNXRST
XHPSEL
AND
STBY
STBY
PCB Binder : VEF1040
C3182
IC3182
R3181
IC3181
C3181
R31
82
C3113
C31
11
C3110
C3114
R3106
X3101
R3107
C3112
CN3171
CN3102
R3155
R3154
R3105
R3104
C31
08
C3107
C3109
R3113
C3106
R3103
C3105 C
3104
C3103
R31
02
R31
01
C3102
C3101
IC3101
R31
12
R3908
R3912
C39
08
C39
04C
3902
C39
12
R3924
IC3901
C3906
R3910
R3906
R3907
R3914
R3916
R3913
R3915
R3153
CN3101C
3152
C3151
R3151 R3152
C39
22
C39
24
R3911
C39
21
C39
23
C39
07
C39
03
C39
11
C39
01
R3923
R3921
IC3901
C3905
R3905
R3909
R3901
RESET CONTROL CIRCUIT
GNDD
RST
5V
SDA
SCL
GND
S_TVOUT_R
S_TVOUT_L
GND
RECMUTE
GND
LIN1_R
LIN1_L
GND
GND
GNDLRCLK
SCLKGND
MCLKGND
SDATA3SDATA2SDATA1
POWERGND
GNDXSD
XMUTE
XOTWGNDSCLSDAGND
DVSS
RE
SE
RV
ED
XT
L_IN
XT
L_O
UT
SD
A
RE
SE
RV
ED
RE
SE
RV
ED
DVDD
/MUTE
/PDN
/HP_SEL
OS
C_C
AP
VR
_DP
LL
SC
LK
LCR
CK
SC
L
SD
IN4
NC
SD
IN1
SIN
D2
/RESET
VBGAP
AVDD_PLL
AVSS_PLL
RE
SE
RV
ED
PW
M_H
PP
L
PW
M_H
PM
R
PW
M_H
PP
RAVSS
VRD_PLL
AVSS MC
LK
PW
M_P
_8
PW
M_M
_8
PW
M_P
_7
PW
M_M
_7
PLL_FLTP
PLL_FLTM PW
M_M
_6
PW
M_P
_6
PW
M_H
PM
L
VRA_PLL
PLL_FLT_RET
DV
DD
_PW
M
PW
M_P
_5
PW
M_M
_5
DV
SS
_PW
M
(2/2)(NJM4565M)
XPDNXRST
3.3VGND
GNDHPR
HPLXHPSEL
PCON
(1/2)(NJM4565M)
43
2
51
1
2
43
5
5
3
4
1
2
65
4
21
3
11
9
87
10
12
15
16
13
14
19
17
18
3
21
5
4
10
9
78
6
16
15
14
13
12
11
10
1817 2019 21 23 2422 26 2725 28
9
8
7
6
5
4
2
1
3
6364 6062 61 59 58 57 5456 55 53
7
54
8 6
15
16
13
14
1112
19
17
18
34
18 2
GNDD
4.7K
0.1/16
T-TPS3825-33DBVR
SN74AHC1G04DBV-TLB 0.1/16
GNDD
18p/50
10/1
0
0.1/16
STBY
1M
15p/50
ASS7062
47
0.1/16
GNDD
V+3R3
0
B5B-PH-K-S
V+5V
GNDD
AKM7077-
STBY
STBY
V+3R3 220
GNDD GNDA
3.3 10/1
0
1000p/50
4.7
0.1/16
0.1/16
0.1/16
V+3R3
0.01/50 0.1/16
220
220 0.01/50
0.1/16
TAS5508BPAG-TLB
47
18k5.6k
680p
/50
560p
/50
680p
/50
ST
BY
180p/50
10k
18k
NJM4565MD
5.6k
18k 5.6k
4.7k
4.7k
4.7k
4.7k
4.7k
STBY
AKM7077- ST
BY
0.1/16
10k 2.2k
V+3R3
10/1
6
0.1/
16
10/2
5
0.1/
25
560p
/50
680p
/50
ST
BY
680p
/50
10k
8.2
180p/50
5.6k
NJM4565MD
V+BSW
18k
5/5C
N 3
002
5/5C
N 3
001
BB
(AD)(AD)
(AD)(AD)(AD)
(AD
)(A
D)
(AD
)(A
D)
PWM MODULATOR
AC 1/2
HP AMP
1 2 3 4
C
D
F
A
B
E
29
5 6 7 8
XSD
VALID
PCON
PWM
LINE_IN_R
LINE_IN_L
+
-
+
-
SD
AT
A2
SD
AT
A3
SD
AT
A1
XP
DN
PWM_M_2PWM_P_1
PWM_P_2
PWM_M_1
PWM_P_3PWM_M_4PWM_P_4
PWM_M_3
PWM_M_7
PWM_P_8
PWM_P_7PWM_M_8
PWM
1608 size CCSR** CKSR**
2125 size CKSQ**
capacitor
1608 size RS1/16S***
2125 size RS1/10S***3216 size RS1/8S***
resistor
R3108
C3115
C31
17
C3116
D3101R3110
C3118
R3114
R3109
R31
97
D3191 C
3191
R3136
Q3132
R31
34
R3196
C31
20
C3119
R3111
R3133 R31
32
R31
31
D3131
Q3131
R31
95
IC3191
C3192
CN3201
IC3191
R3194
R3193
R3192
R31
99 R31
98
R3191
R3142
C3142
C3141
R3141
JA3111
VR_DIG
SD
IN3 DVSS
DVSS
/BKND_ERR
DVDD(DAP202U)
DVSS
VALID
PWM_M_1
PWM_P_1
PWM_M_2
PWM_P_2
PWM_M_3
PWM_P_3
PWM_M_4
PWM_P_4
VR_PWM
(DTC143EUA)
GND
+B
TVIN_L
TVIN_R
(RKB1041)
29 30
33
31 32
34
35
36
37
42
38
40
43
41
39
45
44
48
46
47
52 51 50 49
C
E
B
B
EC
18
43
2 2
1
54
78 6
3
6
1
47
10/1
0
GNDD
0.1/16
0.1/16
GNDD
STBY
MC2846-11
0.1/16
V+3R3
STBY
UD
ZS
4.7(B)
10K
ST
BY
10k
2.2k
RT1N431M
10/1
0
0.1/16
22
V+3R3
STBY 1k
12k
47k
V+BSW
2SA1036K(QR)
GNDDBA10358F B2P-VH
0.1/25
100k
10K
2.2k
BA10358F
100k
10K
UD
ZS
18(B) 8.
2ACN7112
GNDD
ST
BY
V+BV+25
GNDD
330
220p/50220p/50
330XKB3062
: AUDIO DATA SIGNAL ROUTE(AD)
(AD)
(AD)
(AD)(AD)(AD)
(AD)
(AD
)
(AD)(AD)(AD)(AD)(AD)(AD)(AD)
(AD
)(A
D)
(AD
)
CN2G
C 1/2 D-AMP ASSY(AWK7932)
POWER CONFIG
C 1/2
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36030
1 2 3 4
3.9 DAMP ASSY (2/2)
PWM_P_2PWM_M_2
PWM_M_4PWM_P_4
PWM_P_1PWM_M_1
PWM_M_3PWM_P_3
XOTW
XSD
VALID
XOTW
XSD
VALID
PW
M
L335
3
L335
1
L335
2
L335
4L3
251
L325
3
L325
4
L325
2
28 29
21
25
26
22
24
27
23
19
20
16
17
15
18
14
11
12
13
10
8
9
7
6
4
5
3
2
1
27
28
25
26
23
24
21
22
19
20
18
14
15
16
13
17
12
31
30
32
33
34
35
36 32
38
37
39
40
42
41
1 4
44
43
47
45
46
49
484
3
1
2
51
50
53
52
55
54
56
29
30
32
31
33
34
35
36
38
37
4
32
139
40
42
43
41
44
45
10
11
9
8
7
6
5
4
3
2
1
46
47
49
48
51
50
3
4
2
1
53
52
55
54
56
C3301
R33
23
R33
25
C3321 C
3323
C3325
R3327
C3333
C3331
R3335
C3345
R3331
C3337
R3302
R3301
R3303
C3303
R3304
R3305
R3309
R3308
C3304
R3306
R3307 C
3302
IC3301
C3201
R3201
R3203
R3202
R3204
C3203
R3205
R3209
R3315
R3311C3311C3341
R3341
C3327
C3315
C3335
R3343
C3343
R3313C3313R3317 C
3317 L3301
R3316
C3342C3312 R3312
R3342
R3344
C3316
C3334
R3333
C3339
R3337
C3347
R3336
C3346
R3332
C3344
C3314 R3314
R3318
C3318
C3328 C
3332
L3302
R33
24
R33
26
R3328
C3326
C3324
C3336
R32
23
C3221
R32
25
C3223
C3225
C3338
R3334
C3340
R3338
C3348
R3215
R3227
C3227
C3231
C3233
C3211 R3211C3241
R3241
R3243
C3215
C3235
C3243
C3213 R3213
R3216
R3217 C3217
C3216
L3201
R3235
C3245
R3231
C3237
R3233
C3239
R3237
C3247
C3204
R3207
R3208
C3202
R3206
IC3201
C3242R3212C3212
R3244
R3242
C3244
C3218
L3202 C3234
C3232
C3214
R3218
R3214
C3228
R3228
C3226
C3236
R32
24
R32
26
C3224
C3246
R3232 R
3236C
3238C
3240
R3234
R3238
C3248
GNDD
YB 1/16
V+BSW
820
820
1000/25
YB
0.01/50
1000p/50Y
B
3.3
V+B
YB
CF
TLA
474J50
0.1/25 1 ST
BY
4.7K
0.01/50
STBY
STBY
STBY
0.1/16
220
10K
ST
BY
YB
4.7K YB 0.1/16
100
47K
1/16 TAS5122DCA-TBB
YB
GNDD
STBY
YB 1/16
V+BSW
STBY
STBY
220
0.1/16 10K
ST
BY
YB
0.1/50
330p/50
YB
YB
1.5
0.033/50
0.1/252.7
YB
YB
18 0.47/50
ATH7019
YB
330p/50
YB0.1/50
18
0.033/502.7
YB1.5
10
YB
YB0.1/50
330p/50
YBYB
2.7
1.5
0.033/50Y
B
18
18
ATH7019
10
YB
4.7K
0.01/50
0.1/25
1Y
B
ST
BY
ST
BY
0.1/25 1
330p/50
YB0.1/50 2.7
0.033/50
0.1/25
YB
YB1.5
YB
0.47/50 CF
TLA
474J50
820
820
3.3
1000p/50
YB
0.01/50
YB
YB
820
820
V+BSWV+B
0.01/50
1000/25
YB
1000p/50
4.7K
0.01/500.01/50
YB
4.7K
0.1/25 YB
1
ST
BY
0.1/50
3.3 YB
V+B
1.5
2.7
0.033/50
0.1/25
CF
TLA
474J50
YB
330p/50
YB
YBYB
330p/500.1/50
YB
YB
18
18
0.033/50
YB
10
ATH7019
0.47/50
YB
YB0.1/50
2.7
YB
1.5
1.5
2.7
0.033/50
0.1/25 1 ST
BY
4.7K
0.01/50Y
B
4.7K
0.01/50
0.1/25 YB
1
ST
BY
0.1/16
4.7K47K
1/16
100Y
B
TAS5122DCA-TBB
YB
330p/50
YBYB
330p/50
YB0.1/50
YB
18
18
2.7
0.033/50
0.1/25
10Y
B
CF
TLA
474J50
ATH7019
YB
YB1.5
3.3
1000p/50
0.47/50
YB
820
V+BSW
820
V+B
YB
YB
0.01/50
ST
BY
0.1/25
4.7K
10.01/50
0.01/50Y
B
0.1/25 4.7K
YB
1
ST
BY
GND
GND GND
GVDD
NOTICER3211~R3214,R3311~R3314,R3411~R3414 : ACN7148 (2.7Ω))
DM
DP
GREG
/SD_AB
/SD_CD
/OTW
BST_D
GND
OUT_D
PVDD_D
PVDD_D
OUT_D
BST_C
BST_B
CM
/RESET_CD
M3
DREG_RTN
CP
M2
M1
GND
OUT_C
OUT_C
PVDD_C
PVDD_C
OUT_B
AP
BP
DREG
AM
/RESET_AB
BM
GND
GND
OUT_B
PVDD_B
PVDD_B
DGND
GND
OUT_A
OUT_A
GND
DVDD
PVDD_A
PVDD_A
GND
GND
GREG
GVDD
GND
BST_A
GVDD
GND
BST_D
PVDD_D/OTW
GREG
GND
GND
GND
GND
DP
/SD_AB
/SD_CD
CM
/RESET_CD
DM
PVDD_D
OUT_D
OUT_D
OUT_C
BP
DREG
M1
M2
M3
DREG_RTN
CP OUT_C
PVDD_C
PVDD_C
BST_C
BST_B
PVDD_B
PVDD_B
/RESET_AB
BM OUT_B
OUT_B
AP
AM GND
GND
DGND
GND
OUT_A
OUT_A
GND
GREG
DVDD
PVDD_A
PVDD_A
BST_A
GND
GND GVDD
GND
AC 2/2
DIGTAL AMPLIFIER
(FR)
(FR)
(RL)
(FL)
(RL)
(FL)
(RR)
(RR)
15
16
15 16
15
16
15 16
1 2 3 4
C
D
F
A
B
E
31
5 6 7 8
PWM_P_7PWM_M_7
PWM_P_8PWM_M_8
XOTW
XSD
VALID
L335
1
L335
3
L335
4
L335
2
FR+
RR-
RR+
FR-
RL-
FL+
FL-
RL+
C+
SW-
SW+
C-
28 29
25
27
26
24
23
22
21
31
30
32
34
33
36
35
15
19
20
16
17
18
37
38
39
40
42
41
8
9
14
12
13
10
11
43
44
46
47
45
49
48
7
4
2
6
5
3
51
50
52
53
55
54
1 56
32
41
4
32
1
2
1
3
4
5
8
7
6
9
12
10
11
C3401
R34
23
R34
25C
3421 C3423
C3425
R3427
C3433
R3435
C3431
R3431
C3437
C3445
R3402
R3403
R3401
R3404
C3403
R3405
R3409
C3441
R3415
C3427
C3411 R3411
C3415
R3441
C3443
R3443
C3413 R3413 C3417
R3417
C3442
R3416
C3416
R3412C3412
R3442
R3444
R3408
R3406
C3404
R3407
C3444
C3418
C3414 R3414
C3428
R3418
C3402
IC3401 R34
26
R34
24
R3428
C3426
C3424
R3433
C3439
C3435
R3437
C3447
L3401
R3432
C3434
R3436
C3446
L3402
C3432
C3438
R3434
C3440
C3436
R3438
C3448
CN3211
GNDD
YB 1/16
820
820
V+BSW
1000/25
YB
0.01/503.3 Y
B1000p/50
V+B
0.1/25 1
CF
TLA
474J50
YB
4.7K
0.01/50
ST
BY
STBY
STBY
STBY
220
0.1/16 10K
ST
BY
YB
330p/50
YB
0.1/501.5
0.033/50YB2.7
YB
18YB
330p/5018
0.033/50YB0.1/50 2.7
YB1.5
330p/50
YBYB
YB0.1/50 2.7
1.5
0.033/50Y
B
18
18
4.7K
1000.1/16
YB
47K
330p/50
YB0.1/50 2.7
0.033/50Y
B
1.5
1/16 TAS5122DCA-TBB
YB 82
0
820
3.3Y
B0.01/50
YB
V+BSW
0.1/25
ATH7019
YB
YB
0.47/50
4.7K
0.01/50
0.1/25 YB
1
ST
BY
10
YB
10
ATH7019
0.1/25 1 ST
BY
0.1/25Y
B
CF
TLA
474J50
YB
4.7K
0.01/50Y
B0.01/50
0.47/50
4.7K
0.1/25 YB
1000p/50
YB
1
ST
BY
V+B
AKE7121-
GND
GND GND
GVDD
GREG
/OTW
/SD_AB
/SD_CD
DM
DP
PVDD_D
BST_D
OUT_D
PVDD_D
GND
OUT_D
/RESET_CD
M1
M2
CM
DREG_RTN
M3
CP
GND
OUT_C
OUT_C
PVDD_C
BST_B
PVDD_C
BST_C
AP
AM
DREG
BP
/RESET_AB
BM
PVDD_B
PVDD_B
OUT_B
OUT_B
GND
GND
GND
GND
GND
DVDD
GREG
GND
DGND OUT_A
OUT_A
PVDD_A
PVDD_A
GND
BST_A
GVDD
C 2/2 D-AMP ASSY(AWK7932)
C 2/2
: AUDIO DATA SIGNAL ROUTE (Rear Lch)(RL)
: AUDIO DATA SIGNAL ROUTE (Rear Rch)(RR)
: AUDIO DATA SIGNAL ROUTE (Front Lch)(FL)
: AUDIO DATA SIGNAL ROUTE (Front Rch)(FR)
: AUDIO DATA SIGNAL ROUTE (Sub woofer ch)(SW)
: AUDIO DATA SIGNAL ROUTE (Center ch)(C)
(FR)
(RL)
(FL)
(RR)
(C)
(SW)
(C)
(SW)
(C)
(SW
)15
16
15 16
6ch
SP
OU
T
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36032
1 2 3 4
3.10 DISPLAY and USB ASSYS
SG
1
SG
2
SG
4
SG
3
SG
5
SG
9
SG
8
SG
7
SG
6
SG15
SG11
SG10
SG12
SG13
SG14
GR
1
GR
2
GR
3
GR
4
SG16
VEE
SG18
SG17
GR
6
GR
5
GR
7
GR
8
GR
9
GR10
GR10
F-
GR
1
GR
4
GR
2
GR
3
GR
5
GR
6
GR
7
GR
8
GR
9
SG
18
SG
17
GR
10
SG
16
SG
15
SG
14
SG
13
SG
10
SG
8
SG
11
SG
7
SG
12
SG
9
SG
5
SG
6
SG
3
SG
4
SG
2
FLSG
1
F+
Vout
GND
Vcc
10G
F-
5G6G7G 3G4G 1G2G9G 8G P18
P17
P15
P16
P14
P13
P10
P7
P8
P12
P11
P9
P5
P6
P3
P4
P2
P1
F+
SHLD
GNDD+
+5VD-
USB
LAU***J-TA
RS1/16S***J
ALL INDUCTORS ARE IN µH
RS1/10S***J
(2/2)
POWER ON VOL DOWNVOL UP
(1/2) (1/2) (2/2)
HP
FM/AM STOP/PAUSE
PLAY
KEY
OPEN/CLOSE
SR
FL DRIVER
AT : CEAT**M**
ALL RESISTORS ARE IN Ω
AL : CEAL**M**
JQ : CEJQ**M**
CKSRYB**K50
UNLESS OTHERWISE SPECIFIED
ALL CAPACITORS ARE IN µF
NOTES
FL
R60
4
R60
5
CN5902
C60
2
C60
1
D60
1
L602
R603
R602
C60
4
C60
5C603
L603
L601
R5990R5988
JA602
KN
5902
R5974
R5972
D5972 R5978
R5976
R5975
Q5973
D5971
Q5971 R5977
R5973
R5971
S59
61
S59
63
S59
62
R5962 R5963
C59
51
C59
52
R59
53
R5903
R5902
CN5901
R5982
R5980
Q5973 Q5974 Q5974
R5984
R5986
C5972 C5974
L5972
C5978
C5979
L5973 C5977
R5989
R5981
R5979
C5971 C5973
R5985
R5983
L5971
R5987
JA5902
S59
64
S59
65
S59
66
S59
67
KN5903
R5964 R5965 R5966
R59
52
R5954
R59
51
KN5901IC5902
C59
21
C59
20
C59
22
C59
15
R5901
R5904IC5901
R5910
L5902
C5916
C5917
D5902
C5918
C5919
R59
08
C5906
C5904 C5903
C5905
C5907
V5901
C59
11
C59
12
C59
13
L5901
C59
14
D59
01
Q5901
R5905
R5909
R5906
Q59
02
R5907
GNDUSB
ST
BY
ST
BY
CKS3376
68
V5USB
220/
6.3
0.1
UM
ZU
6.2N
STBY
0.1
0.1
STBY
STBY
STBY
STBY
STBY
68
68 68
STBYGNDD
XKP3086
GNDD
ST
BY
68
STBY 2.2k
2.2k
2.2k
IMX9
STBY
RT1P241M 2.2k
68
VS
G10
24
VS
G10
24
VS
G10
24
1k
47/6
.3
0.02
2
AL
CKS3378
STBY STBY
68
IMX9 IMX9 IMX9
68 CTF1306
1000p 0.047/25
STBY
1000p 0.047/25
STBY
68
68 68
CTF1306
68
68 STBY
0.01/50
STBY
STBY
AKN7003-
VS
G10
24
VS
G10
24
VS
G10
24
VS
G10
24
STBY
1.2k 1.5k 1.8k 1k
ST
BY
ST
BY
100
47
STBY
RPM7540-H9
VFDP
220p
220p
220p
GNDD
0.01
/50
220
220
220
PT631582k
STBY
0.022/50
0.022/50
10LA
U100JSTBY
47/35AL
STBY
ST
BY
STBY STBY
JQ47/35 VE+5
0.02
2
0.02
2
AL
47/6
.3
22LAU220J
ST
BY
ST
BY
STBY
STBY
STBY
STBY ST
BY
STBY
11
10
65
9
4
78
12
3
5
4
1
3 4
3
21
2
7
6
C2
E2
10
13
1112
7
3
4
56
9
8
21
B
B2EE
B
B2
C C
C2
E2
2
3
76
1
45
13 1412 15 1716 20 22211918
8
7
10
11
9
6
27
24
25
23
28
26
4
5
2
1
3
43 4244 41 3940
30
29
31
33
32
363738 3435
51 876 119 141312 15 16 17 2019 22 23 27 323024 26 29 3533 3837 39 40 45
USB_DM2GNDUSB
HP_DET
V5USB
USB_DP2
GNDUSB
V5USB
HP_R
HPMUTE
GNDDHP_L
KEY1KEY2
GNDD
GNDD
VFDP
FLDC+FLDC-
REMOCON
GNDD
VE+5
FLCSFLCK
FLDATA
VS
S
VD
DV
DD
VS
S
VEE
(AAV7107-)AAV7104-
AEB7367FL SPACER FL SPACER
AEB7367
CN
5602
3/5B
BC
N56
013/5
EDD E
D DISPLAY ASSY(AWU8289)
E USB ASSY(AWU8290)
DISPLAY ASSYS5961 : POWER ONS5962 : VOL UPS5963 : VOL DOWN
S5964 : FM/AMS5965 : STOPS5966 : PLAY/PAUSES5967 : OPEN/CLOSE
1 2 3 4
C
D
F
A
B
E
33
5 6 7 8
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36034
1 2 3 4
3.11 POWER SUPPLY UNIT
ACIN
G
1 2 3 4C
D
F
A
B
E
35
5 6 7 8
CN
1001
B3/5
CN3201C 1/2
POWER SUPPLY UNIT(AWR7046)
G
G
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36036
1 2 3 4
3.12 WAVEFORMS
DVD MAIN ASSYB
2 IC201-pin 39 [TROPENPWM]V: 1V/div. H: 5µsec/div.
3 IC201-pin37 [DMSO]V: 1V/div. H: 10µsec/div. V: 1V/div. H: 10µsec/div. V: 1V/div. H: 2sec/div.
1 IC201-pin50 [FG]V: 1V/div. H: 2msec/div.
8 IC401-pin23 [CompositeVideo Out]V: 1V/div. H: 10µsec/div.
4 CN102-pin 11, 10, 9 (IC101-pin 30, 33, 36) [SPINDLE (WVU)]V: 2V/div. H: 2msec/div.
GND
GND GND GND
GNDGNDGND
GND
GND
PLAYTray :opening
Pless OPEN key Pless PLAY key
Braking a turn of disc
[Tray stops]
[TRAY OPEN] [DVD PLAY] [DMSO]
[Tray is opening] [Tray is closing]
9
9
10
9
10
IC401-pin21 [S VIDEO OUT - Y]V: 1V/div. H: 10µsec/div.
10 IC401-pin26 [S VIDEO OUT - C]V: 1V/div. H: 10µsec/div.
GND
GND
Note : The encircled numbers denote measuring point in the schematic diagram.
Measurement condition ;No. 1 to 10 : reference A1 (DVD), T2-chp 19, Color-barNo. 11 to 14 : reference A1 (DVD), T1
1 2 3 4
C
D
F
A
B
E
37
5 6 7 8
11 IC201-pin212 [ACLK]V: 1V/div. H: 20nsec/div. 12 IC201-pin209 [ALRCK]
V: 2V/div. H: 500nsec/div.
13 IC201-pin210 [ABCK]V: 2V/div. H: 500nsec/div.
14 IC201-pin197 [ASDATA0]V: 2V/div. H: 500sec/div.
15 IC3201, IC3301, IC3401 [PWM_M, PWM_P]V: 1V/div. H: 2µsec/div. 16 IC3201, IC3301, IC3401 [OUT_A, B, C, D]
V: 5V/div. H: 2µsec/div.
DAMP ASSYC
GND
GND GND
GND
GND
GND
12
13
14
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36038
1 2 3 4
1 2 3 4
C
D
F
A
B
E
39
5 6 7 8
4. PCB CONNECTION DIAGRAM
4.1 LOAB ASSY
NOTE FOR PCB DIAGRAMS :1. Part numbers in PCB diagrams match those in the schematic diagrams.2. A comparison between the main parts of PCB and schematic diagrams is shown below.
3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram.4. View point of PCB diagrams.Symbol In PCB
DiagramsSymbol In SchematicDiagrams
Part Name
B C E
D
D
G
G
S
S
B C E
B C E
D G S
B C E B C E
B C E
Transistor
Transistorwith resistor
Field effecttransistor
Resistor array
3-terminalregulator
CapacitorConnector
P.C.Board Chip Part
SIDE A
SIDE B
15
5 1
SW
2
(V+
5D)
V+
3D
LOAD-
LOAD+
GN
D
PNE-1B1
C102
C101
CN602
CN601
1 2
51
VWG2346-VWG2279-
5
VWG
LOAB
51
VNP1836-C
CN602
S101
CN601
SIDE A SIDE B
LOAB ASSYA LOAB ASSYA
CN104B
(VNP1836-C) (VNP1836-C)
LOADING MOTORASSY
M
CN601CN602 CN601 CN602
A A
XV-DV3605 6 7 8
C
D
F
A
B
E
120
C344 C
345
C346
C235
C236
C202
C20713
R266
C347
C250
R2
R265
67
304
1304
X3004
R3063
R3062
66
R3065
85
R3083
R3086
R3088
R3087
E
XV-DV36040
1 2 3 4
4.2 DVD MAIN ASSY
100
100 20 30 40 50 60 70 80 90 100
110
2030
4050
6070
8090
100
110
120
130
X
Y
DVD MAIN ASSYB
B
SIDE A
SIDECONTACT1
12
CONTACTSIDE
4
1
15
SID
EC
ON
TA
CT
24
231
2
13
54
1 4
8 5
124
25 48
5428
1 27
64
12865
129
SID
EO
PE
N
14
44 23
1 22
3
4 5
1
SID
EC
ON
TA
CT
1 7
8051
5031
30 1
100
81
CO
NT
AC
T S
IDE
1
11
SID
EC
ON
TA
CT
131
14
85
13
14
SID
EO
PE
N
1
NP
4 5
3 1
1
0 1 2 3 4 5 6 7 8 90 1 2 3
0
0 1
CBA
ICT FC1 FC2
LF
R
C373
CN102
C309
CN103
CN
104
C371
R325
CN
101C
372
R375
R373
R372
R371
C140
C310
R326L308
L309
R374
R315
Q304
R314
R313
R318
Q307R322Q308R321
R310
Q305
R282
C290
R224
IC204
IC203
C289
C224
C225
C226
R225
C231
R227
C285
R226
C286 C287
C232
R228
C288
C233
R229
C284
C234
C283
C282
IC202C281
IC201
R201
R202
R205R206
C209
C208
C211C212
C210R204
CN204
C201
C221
R223
C203
C204
C205
C206
R210
R219
R218
R233
R232
R285
R284
R234
R235
C2
C220
R207
R208
R236
C200
C215
R221
R237
C227
R211
R217 C217
C296
C229
R281
R258
R259R260
R261
R200
R212
R213
R214
R154
C103
C153
C151
C121
C145IC101
R152R153
C152
R133
C146
R135
C144C141
C142
C143C
161
R136
R134
C132
C102
R132
C104
R151
C131
R131
C101
C133
C320
C374
R238
R239
C219
C230
R262R263
R222
R2
R271
C783
C781
C782
C771
L772
C772
IC771
R771
C773R772
C216
R769
R770
L761
IC781
D782 D
781
KN103
C214
C218
R215
R216
C5524
C5508
C1501
C1502
R5510
R5508
L1501
C1505R
5515R
5513
C5525
C5597
Q5525R
5514R
5516
CN5501
R5597
R5509
R1202
C1202
C1201
C1101 IC
1101
C1102
R1101
C1103
C1203
R1201
R1204
C801
R801
R1301
R1415
C1413
R1401
R1402
R1403
R1404
Q1413D1415C1415
R1302
R1
R1303
C3953
C3954
L3951L3952
C3952
C3951
R3951
R3952R1305
L1305
R3954
R3953D
1501
R1001
C5519
R5519
Q3951R
3955
Q1301
R5557
R5596
C5555
X5501
R5517 R5507
C5502
R5521
R5581
R5583
R5506
R5582
R5512
C5569
C5501
C5509
C5539
R5598
KN5501
C5579
C5577
R5574
IC5501
R5501
C5517
R5518
R5522
R5525
R5527
R5535
CN
5601
CN
5602
C5603
C5601
C5602
KN
5601
C5606
C5605C5604 R5536
R5537
R5538R5546
R5547
R5548
R5565
R5564
R5563
C5557
IC5502
C5558
R5558
CN1002
R5562
R5559
R5575
R5576
R5584
R5587R5586
R5604
R5602
R5603
R5606
R5601
Q5601
D5601
R5605
C5589
R5590
Q5531
R5528
Q5532
R5530
Q5602
Q1201Q
Q1303
R5534R5533
R5532R5531
R1307
R5541
R5542
R5543R5545
R5566 R5570
R5577
R30
R3089
R30
C5504C5521
C5522
C5578
R291
R292
R293
R294
R5781
R5782
R767
R768
Q5533
R5544
IC5503
R5502
R5503
C5503
Q1202
Q1302
R1306
D1201
C1301
C1204
R5569
C5518
R5505
D802
R272
R220
Q1402
D1403
D1416D1417
PC
BB
IND
ER
ST
ES
TUT
ES
T
-AO
PE
N S
IDE
C
D
F
HE
AT
PR
OO
FP
RE
FLU
X
Production code
AW
M00
01
11
22
23
33
44
45
55
66
67
77
0
DV
D M
AIN
AS
SY
1/2
V+
1R8
VE+5
V+
3
V+
6R8
V+
5V
V+
10
V+3R3
88
89
99
123456789 CN1001
CN102
CN5902E
CN5601
CN3G
CN1001
CN
601
A
CN
104
CN
101
ToSTEPPING
MOTOR
ToSPINDLE MOTOR
TR
AV
ER
SE
ME
CH
A A
SS
YC
N1
CN103
CN5901DCN5602
1 2 3 4
C
D
F
A
B
E
28
SID
EO
PE
N
1
C231
C232
R228
R229
C28302
IC201
C206
C215
R1305
305
Q1301
Q13
R1306
N590
5601
41
5 6 7 8
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
B
(ANP7566-C)
SIDE A
CN1H
CN5701
27
1
193
192
256
120
21 40
4160
6180
41
8 5
NP
NP
119
4 5
3 1
1
13
1
9
1
19
1 SID
EC
ON
TA
CT9
CONTACT SIDE
1 23
9
8
16
1
189
16
CONTACTSIDE
11
1
16 1
9 8
18
9 16
8
1
5
4
119 119
NP
NP
8
1 4
5
54 3
1
NP
45 1
3
141 28
15
C343
C344 C
345
C346
C228
C222
C233
C234
C235
C236
C240
C239
C252
X201
C251
R251
R252
C254
R254
C258
C256
C255
R253
C261
C260
C259
C264
C265C266
C267
R255
C268C269
C271
C272R256
C273
C202
C237
C204
C205
R241R242
R243
R244
R245R246
R248
C207
R279
C213
R209
R207
C244
C245
C246
R266
C347
C250
R264
R265
R267
R271
C243
R250
C262
C223
KN202
C238
C241
C242
C247
C248
R230
IC931
C931
C943
C942
R931
C945
C946
R933 R934
L931
C933
C934
R935
R936
R937
R938
R940
R939
C932
C944
R942 R941
IC932
C940
R953
R947
C947
VA
932V
A931
Q935
R948
C948
R958
R961
R959
R957
R960
R962
R951
VA
936
R952
R955R954
R956
R967
C950
R950
C949
R949
VA
935V
A938
VA
937
Q934
L934
Q933
R964
R965 R969
R966R968R963
R971
Q936
L932
L933
L935
CN
931
VA
933V
A934
D933R970
R972
R973
C952
C951
C935
C954
C953
L936
C955
R911
R906
R901R902
R903
R904
R905
IC981 C
982
C983
C984
L937C985
C987
C956
R974R975
R944
R943
R945
C936
IC1101
R1304
R1303
KN1001
JA5931L5934
L5933
L5932
L5931D5931
R5931
R5940
D5933
R5933
R5942
Q5935
R5935R5934
R5938
Q5931
R5937
Q5934
R5939
R5936
R5943
CN5532 CN5533
CN5531
Q1304
C4612
C4613
L4603
C4614
C4615
R4609
R4610
JA4602
C405
C404
C413
C411
C403
C415
C414
C412
C416
C402
C401
C406
R402
JA401
JA402
C426
C421
C425
C424
L421
C430
C431
L422
C429
R426
R421
R425
R424
C427
C428
R423
R422C422
C423
Q491
C447
R431R411
Q428
R428
R412
C449
C451
R413
R414
C453
C455
R415
C457
R416
CN401
R432
R433
R434R435
R436
JA403
R405
R9401
R9402 R
9412
C3027
CN451
R491
IC3001
C3025
C3026
R3021
R3022
C3002
C3001
C3045
IC3003
C3048R3048
C3044
C3042
C3041
C3046
C3043
CN5701
Q5936
IC5701
R5703
R5706
R5705
C5714
C5720
C5707
C5703
C5702
X5701
C5704
C5706
C5716
R5710C
5712C
5715
R5704
C5701
C5705
C5719
C5713
C3011
C3012
R3013
R3014
R3018
R3017
R3055
C3052
C3057
C3056
X3004
R3056
R3052
R3053
R3054
R3049
C3028C3029
IC3005
C3064
R3061
R3063
R3062
R3066
R3065
C3023
C3021IC3004
R3046
R5717
R5716R
5715R
5714
R5719
R5712
R5713
R5718
Q5701
R3045
R3064
R3020
C3019
R3019
C3020
R5701
R5702
R3001
R3002
C5708R5707
R3023 R3024
R3012
R3011
R3015
R3016
C3015
C3016
R3025
C3024
R3007
R3041
CN
3001
CN
3002
R3026
Q3006
R3006
C3003C3004
Q5703
C5709
R3073
R3081
R3082
R5708
Q3005
R3009
R3039
R3040
R3010
C3022
KN
3001
R3057R3058
R3089
R3085
R3083
R3086
R3088
R3084
R3087
R3903
R3906
R3905
R3902
C3907
C3909
R3908
C3905
JA3901
C3901
C3906
R3008
R3059
R3060
R3090
IC3901
C3908
R3907
C3903
C3902
C3910
C3904
C3911
D3901
D3902D3903
IC3002
L3901R257
R3027
R3028
R3910
R3911
R3913
R3914
R3915
R914 R915
VA901VA902
VA903
Q5932
R240
R247
02
C1301
R269C270
IC205
IC401
R401
R406
C5936
C5931
C5932
D5936
B
B
C
C
A
A
AB
E
2 CN3101C
CN3001
CN3102C
CN3002
CN
461
F
CN
451
XV-DV3605 6 7 8
C
D
F
A
B
E
110
1
XV-DV36042
1 2 3 4
120
130
140
150
160
170
180
190
200
210
220
250
230
240
DVD MAIN ASSYB
B
SIDE B
1 131 9 1 19
19
123
111
191191
CN3001CN3002
CN5701
CN
451
CN401
1 2 3 4
C
D
F
A
B
E
120
43
5 6 7 8
10
0
10
0
2030405060708090100
110
2030
4050
6070
8090
100
110
120
130
X
Y
B
SIDE B
(ANP7566-C)
1
12
1
4
15
14
17
111
131
1 14
CN102CN1001
CN
104
CN
5601
CN103
CN
5602
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36044
1 2 3 4
4.3 DAMP ASSY
100
10
0
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
20 30 40 50 60 70 80 90 100 110 120 130
X
Y
DAMP ASSYC
C C
(ANP7531-D)
1
64
16
17 32
3348
49
1
54
3
45
13
OU
TIN
119119
41 8
5
185 4
85 4
1
5 1
NP
5629
281
128 29
5629
281
NPFCICT
LF
R
C3152
C3151
IC3101
C3101
C3102R3101
R3102C3105
C3104
C3103
C3106
C3109C3107
C3108
R3103
R3113
C3111 R
3105
C3110C3112
X3101
R3106C3113
C3114
C3117
C3116
R3109
C3115
R3110
R3111
C3120
C3119
C3118
R3142
R3141
C3141
IC3181IC
3182
R3181
C3182
C3181
CN3201
IC3171 R3171
C3171
C3172
R3198
CN3102CN3101
R3151
R3153
R3152
R3154
R3155
R3182R
3107
R3108
C3613 C3614
D3602
R3199
CN
3111
R3630C3612
R3618R3614
IC3601
D3601
C3142
C3601
C3603C3607
R3612
R3610
R3606C3602
C3604C3608
R3624R3623
C3907
C3903C3901
C3906
C3924
R3912
IC3901
R3924R3923R3921
R3911
C3921
R3909C3905
C3923
R3905
C3908
R3910
C3922
C3904C3902
R3901
R3907
R3908
R3906
R3601
R3605
R3621
R3609
R3613R3617R3615 R3616
R3607 R3608R3611
R3629
C3605
C3606
C3611
C3621C3622
C3623C3624
C3609
C3610
R3191
IC3191
R3192
R3193
R3194
R3195
C3191
R3197
D3191
C3192
CN3171
R3196
D3603
Q3602
Q3601
IC3201
R3215
C3215
R3211
C3211
C3213
R3213
C3212
R3212
C3217
R3217
C3216
R3216
C3218
R3218
R3214
C3214
C3228C3202
L3202
L3201
Q3604
C3232
R3234R3238C3240
R3236C3238
R3232
R3205
R3206
C3201
C3204
R3207
R3208
R3203R3202
C3224
C3226
R3228
R3209
R3226
C3227
C3221R3227
C3225
C3223
R3223
C3237
C3239
R3235R3231
R3233
R3237
C3231
C3203
R3201
R3224
R3225
R3309
R3311
R3317
C3303
C3314
R3324C
3317
C3324
C3331
R3337
R3326
R3334
L3301
R3302
R3327
C3332
R3301
IC3301
R3315
R3313
R3316
R3325
C3321
R3314
R3332
C3315
R3338
R3331
R3312
R3303 C3338
C3340
C3328
R3333
C3302
R3335
C3337
R3328
C3316
C3311
C3313
C3318
R3318
R3323
C3326
C3312
R3305
C3339
R3336
L3302
C3304
R3306
C3327
C3325
C3301
R3308
C3323
R3307
C3402
C3424
R3433
C3417
C3440C3438
C3431
C3428
R3437
C3413
C3411
C3414
C3418
R3417
C3403
C3437R3435
C3416
R3428
R3424
R3427
R3425
C3432
R3414
R3402
C3421
R3413
R3415
R3401
IC3401
R3432
R3412
R3431
R3438
R3403
R3426R3434
L3401
C3415
R3411
C3439
C3423
R3436
R3405
C3426
C3412
L3402
C3425
C3401
R3408
C3427
C3404
R3416
R3406
R3418
R3407
R3409
R3423
CN
3211
KN
3101
R3112
R3104
C3911
C3912
R3304
R3204
R3404
C3444
C3442
C3443
R3913
C3441
R3441
C3341
R3443
C3343
R3442
R3343
Q3603
R3444
R3625
R3132
R3131
Q3131
Q3132
R3341
R3626
R3627
R3628
R3914
Q3901
R3344
R3342
C3342
C3344
D3101
R3114
R3133
R3134
R3136
D3131
C3233
C3234
C3235
C3236
C3333
C3334
C3335
C3336
C3433
C3434
C3435
C3436
R3915R3916
R3619
R3620
R3631
R3632
R3241
R3243
R3242
R3244
C3241
C3243
C3242
C3244
AWK7935
FR
+F
R-
SR
+S
R-
FL+
C+
FL-
C-
SL+
SW
+S
L-S
W-
LOU
TR
INLI
NR
OU
T
19.PC
ON
DAMP ASSY
2.+B
1.GN
D
5.GN
D4.R
ST
3.+5V
2.SD
A1.S
CL
OPEN SIDE
1
56
18.XH
PS
EL
17.HP
L16.G
ND
15.HP
R14.G
ND
13.3.3V12.X
RS
T11.X
PD
N10.X
MU
TE
9.GN
D8.S
DA
7.SC
L6.G
ND
5.XO
TW
4.XS
D3.G
ND
2.PO
WE
R1.G
ND
14.GN
D15.M
CLK
16.GN
D17.S
DA
318.S
DA
219.S
DA
1
13.SC
LK12.LR
CLK
11.GN
D10.LIN
L9.G
ND
8.LINR
7.GN
D6.S
OU
TL
5.GN
D4.S
OU
TR
3.RE
CM
UT
E2.G
ND
1.GN
D
Production C
ode
AWK7874
AWK7876
EL FR4 P
AW
K7874
AW
K7875
AWK7932
AWK7933
AWK7931
AWK7875
CN3001B
CN3101
CN3002B
CN3102
CN2G
CN3201
SIDE A SIDE A
1 2 3 4
C
D
F
A
B
E
45
5 6 7 8
10 0
10
0
20
30
40
50
60
70
80
90
100
110
120
130
140
150
2030405060708090100110120X
Y
DAMP ASSYC
SIDE BSIDE B
(ANP7531-D)
1
191 191
1 5
LF
C3245
C3246
C3247
C3248
C3345
C3346
C3347
C3348
C3445
C3446
C3447
C3448
CN3101CN3102
CN3201
C C
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36046
1 2 3 4
4.4 DISPLAY and USB ASSYS
DISPLAY ASSYD
D E D E
SIDE ASIDE A
20
30
40
50
60
70
80
60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
X
Y
USB ASSYE
10
10
0
20
30
40
50
60
70
80
20 30 40 50 60 70
X
Y
(ANP7568-A)
(ANP7568-A)
C5913C
5918 IC5902
S59
61
S59
67
S59
62
S59
65
S59
66
S59
64
S59
63
V5901
KN
5901
KN
5903
W5908
W5907
W5906
W5912
W5905
W5909
W5910
W5911
CN5901
L5901
L5902
C5907
C59
52
PNE-1B1
145
OPEN/CLOSESTOP
AWU828913 1
DISPLAY ASSY
FL SPACER
PLAY/PAUSE
FL SPACER
CONTACT SIDE
ICTFC
A
B
USBVOL DOWNVOL UPPOWER ON
FLDC+
FLDC-
VFDP
VFDP
GNDD
GN
DD
VE
+5
IC5901
1/4
JA5901
KN5902
CN5902
JA602
C602
W5901
W5904
W5902
W5913
PNE-1B1
11 1
USB ASSYAWU8290
CONTACT SIDE
A
Production Code
GNDUSB
GNDUSB
1/4
CN5602B
CN5901
CN5601B
CN5902
1 2 3 4
C
D
F
A
B
E
47
5 6 7 8
DISPLAY ASSYD
D E D E
SIDE BSIDE B
20
30
40
50
60
70
80
60708090100110120130140150160170180190200X
Y
10
10
0
20
30
40
50
60
70
80
203040506070X
Y
USB ASSYE
(ANP7568-A)
(ANP7568-A)
44
3433
23
22
1211
1
131
LF
ABC
10
0
3210 9876543210
1 PNE-1B1
DISPLAY ASSY
11.KE
Y1
10.GN
DD
9.GN
DD
8.FLD
C+
7.FLD
C-
5.VE
+5
6.VF
DP
4.RE
MO
CO
N3.F
LCS
2.FLC
K1.F
LDA
TA
12.KE
Y2
13.GN
DD
3334
11 12
1
44
FLDC+FLDC-
GN
DD
VFDP
VFDP
VE
+5
GNDD
POWER ONVOL UPVOL DOWNUSBSTOPPLAY/PAUSEOPEN/CLOSE
CN5901
1/4
R5903
R5901
R5902
C5920
C5921
C5922
C5915
C5919
C5911
C5914
C5912
D5901
C5917
C5916
D5902
R5952
R5951
C5951
R5953
R5963
R5966
R5964
R5965
R5962
R5904
C5905
C5903
C5904
IC5901
C5906
R5905
R5906
R5907
Q5902 Q
5901
R5909
R5954
R5910
R5908
10
1 11
NP
NP
LF
PNE-1B1
USB ASSYNP
NP
5.HP
_DE
T
2.HP
_L1.H
PM
UT
E
3.GN
DD
4.HP
_R
6.GN
DU
SB
7.V5U
SB
8.V5U
SB
9.US
B_D
P2
10.US
B_D
M2
11.GN
DU
SB
GNDUSB
GNDUSB
CN5902
JA5901
JA602
1/4
C5971
C5972
R5983
R5984
R5986
C5973 C
5974
R5987
L5971
R5988
R5989
R5990
C5977
L5972
L5973
R5971R
5973
R5981
R5979
R5980
R5982
R5974
R5972
R5975
R5977
R5976
R5978
R5985
Q5971
D59
71
D59
72
L602
C601
L601
C603
C5978
C5979
R602
R603
C604
C605
Q5973
Q5974
R604
R605
D601
L603
CN5902
CN5901
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36048
1 2 3 4
4.5 POWER SUPPLY UNIT
CN
1001
B
CN
3
SIDE ASIDE A
POWER SUPPLY UNITG
G G
To AC POWER CORD
CN1
CN
3201
C
CN
2
1 2 3 4
C
D
F
A
B
E
49
5 6 7 8
CN
3
SIDE BSIDE B
POWER SUPPLY UNITG
G G
CN1C
N2
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36050
1 2 3 4
5. PCB PARTS LIST
7777 PCB PARTS LIST
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.When ordering resistors, first convert resistance values into code form as shown in the following examples.Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%).
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5 6 14 7 3
R 5 01 R 0
5 6 2 1
NOTES:
560 Ω47k Ω0.5 Ω1 Ω
RD1/4PU JRD1/4PU JRN2H KRS1P K
56 x 10 1
47 x 10 3
R501R0
561473
5.62k Ω RN1/4PC F562 x 10 1 5621
Meaning of the figures and others in the parentheses in the parts list.Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding PC board.IC 301 (A, 91, 111) IC NJM2068V
Mark No. Description Part No.
LIST OF ASSEMBLIES1..LOAB ASSY VWG2346
1..DAMP ASSY AWK7932
1..DVD MAIN ASSY AWM8027
NSP 1..COMPLEX ASSY AWM80332..DISPLAY ASSY AWU82892..USB ASSY AWU8290
> 1..POWER SUPPLY UNIT AWR7046
1..FM/AM TUNER UNIT AXX7172
Mark No. Description Part No.
Mark No. Description Part No.
A LOAB ASSYMISCELLANEOUS
S 101 VSK1011CN602 CONNECTOR S2B-PH-KCN601 CONNECTOR S5B-PH-K
B DVD MAIN ASSYMISCELLANEOUS
IC 101 (A,41,32) 6CH DRIVER IC BD7995EFSIC 201 (A,77,112) DVD IC MT1389FE/H-LIC 202 (A,110,99) SD-RAM(64M) HY57V641620ETP-HIC 203 (A,72,77) FLASH ROM AYW7117IC 204 (A,93,79) EEPROM S-24CS04AFJ
IC 401 (A,103,145) DVD VIDEO AMP IC MM1758XFIC 771 (A,34,50) LOAD SWITCHING AAT4618IGV-0.5-1
> IC 781 (A,51,50) REGULATOR IC NJM2845DL1-05IC 931 (A,102,195) HDMI IC MT1392E/C-L
> IC 981 (A,84,160) REGULATOR IC NJM2872BF05
> IC 1101(A,30,109) REGULATOR IC NJM2846DL3-18IC 3001(A,41,151) IC TC4052BFNIC 3003(A,23,145) AD CONVERTER IC AK5358ETIC 3004(A,25,132) IC TC7WU04FUIC 3005(A,42,126) IC TC74VHC157FTS1
IC 5501(A,83,44) SYSTEM CONTROL MICON PDC133AIC 5502(A,111,37) EEPROM S-93C46BD0I-J8T1Q 304 (A,13,35) TRANSISTOR 2SC4154Q 305 (A,14,41) NMOS FET TRANSISTOR UM5K1NQ 307 (A,11,61) CHIP TRANSISTOR HN1A01F
Q 308 (A,16,61) CHIP TRANSISTOR HN1A01FQ 933 (A,114,212) TRANSISTOR RT1N144M
Q 934 (A,115,216) CHIP TR (PNP X 2) UMB1NQ 1201(A,23,101) TRANSISTOR RT1N141M-11Q 1202(A,31,92) CHIP TRANSISTOR RSR015P03
Q 1301(A,10,107) TRANSISTOR(SC-70) 2SA1602AQ 1302(A,16,110) TRANSISTOR 2SA1577Q 1303(A,10,97) TRANSISTOR 2SC4154Q 1304(A,22,112) TRANSISTOR 2SC4154Q 1402(A,110,25) TRANSISTOR(SC-70) 2SA1602A
Q 1413(A,106,21) TRANSISTOR RT1N241MQ 3005(A,42,140) TRANSISTOR RT3AMMMQ 3951(A,46,65) TRANSISTOR RT1N241MQ 5525(A,58,62) DIGITAL TR(SC-70) RT1N431MQ 5703(A,74,187) TRANSISTOR RT3CLLM
D 802 (A,60,27) DIODE MA111D 933 (A,112,204) DIODE UDZS5R1(B)D 1201(A,24,88) DIODE MA111D 1403(A,110,30) DIODE MC2846-11D 1415(A,103,22) DIODE UDZS4R7(B)
L 421 (A,7,215) INDUCTOR CTF1389L 422 (A,26,209) INDUCTOR CTF1389L 761 (A,50,98) COIL VTH1047L 772 (A,39,50) CHIP SOLID INDUCTOR ATL7002L 931 (A,95,171) CHIP BEADS ATL7010
L 932 (A,97,216) COIL ATH7022L 933 (A,100,216) COIL ATH7022L 934 (A,102,216) COIL ATH7022L 935 (A,105,216) COIL ATH7022L 936 (A,93,171) CHIP BEADS ATL7010
L 937 (A,100,169) CHIP BEADS ATL7010L 1305(A,20,108) INDUCTOR CTF1395L 1501(A,58,44) AXIAL INDUCTOR LAU220JL 3951(A,40,65) INDUCTOR CTF1346L 3952(A,38,65) INDUCTOR CTF1346
Mark No. Description Part No.
1 2 3 4
C
D
F
A
B
E
51
5 6 7 8
JA401 (A,38,232) JACK XKB3059JA402 (A,20,232) JACK XKB3061JA931 HDMI CONNECTOR AKP7210X 201 (A,75,140) CRYSTAL RESONATOR VSS1168
(27MHz) X 3004(A,24,123) CRYSTAL RESONATOR VSS1140
(12.288MHz)
X 5501(A,64,44) CERAMIC RESONATOR ASS7034(10MHz)
CN101 (A,21,41) CONNECTOR VKN2045CN102 (A,19,18) 12P CONNECTOR VKN1243CN103 (A,20,57) 4P CONNECTOR VKN1235CN104 (A,46,10) CONNECTOR POST B5B-PH
CN1001CONNECTOR B13B-PHCN3001(A,8,157) 19P RECEPTACLE AKP7199CN3002(A,8,193) 19P RECEPTACLE AKP7199CN5501(A,114,53) CONNECTOR CKS3372CN5601(A,29,56) CONNECTOR CKS3376
CN5602(A,85,12) CONNECTOR CKS3378CN5701(A,86,179) CONNECTOR CKS3376
2 PCB BINDER VEF1040
RESISTORSR 131 (A,28,24) RS1/10S4R7JR 132 (A,28,26) RS1/10S4R7JR 133 (A,28,28) RS1/10S4R7JR 134 (A,28,30) RS1/10S4R7JR 135 (A,28,32) RS1/10S4R7J
R 136 (A,28,34) RS1/10S4R7JR 151 (A,51,37) RS1/10S1R0JR 152 (A,51,41) RS1/10S1R8JR 153 (A,49,37) RS1/10S1R0JR 154 (A,49,41) RS1/10S1R8J
R 201 (A,50,76) RS1/16S152JR 202 (A,53,76) RS1/16S223JR 204 (A,51,79) RS1/16S223JR 205 (A,55,79) RS1/16S513JR 206 (A,56,76) RS1/16S513J
R 212 (A,56,101) RS1/16S103JR 213 (A,56,102) RS1/16S103JR 215 (A,80,86) RS1/16S332JR 216 (A,79,89) RS1/16S682JR 218 (A,86,81) RS1/16S103J
R 219 (A,86,82) RS1/16S103JR 221 (A,76,89) RS1/16S330JR 222 (A,92,87) RS1/16S330JR 223 (A,91,87) RS1/16S330JR 224 (A,73,89) RS1/16S330J
R 225 (A,99,99) CHIP RESISTOR ARRAY RAB4C330JR 226 (A,99,102) RS1/16S0R0JR 227 (A,99,103) RS1/16S330JR 228 (A,99,105) RS1/16S330JR 229 (A,99,106) RS1/16S330J
R 230 (A,86,134) RS1/16S103JR 233 (A,68,92) RS1/16S0R0JR 234 (A,79,86) RS1/16S330JR 235 (A,77,86) RS1/16S472JR 237 (A,77,89) RS1/16S330J
R 240 (A,88,147) RS1/16S0R0J
Mark No. Description Part No.R 241 (A,83,134) RS1/16S330JR 242 (A,83,138) RS1/16S330JR 243 (A,81,134) RS1/16S100JR 244 (A,88,134) RS1/16S330J
R 245 (A,88,138) RS1/16S330JR 246 (A,86,138) RS1/16S330JR 247 (A,88,156) RS1/16S0R0JR 248 (A,81,138) RS1/16S330JR 251 (A,70,134) RS1/16S104J
R 252 (A,72,130) RS1/16S0R0JR 253 (A,73,134) RS1/16S681JR 254 (A,67,133) RS1/16S754JR 255 (A,61,134) RS1/16S104JR 256 (A,57,131) RS1/16S153J
R 257 (A,74,130) RS1/16S0R0JR 258 (A,80,89) RS1/16S330JR 259 (A,82,87) RS1/16S330JR 260 (A,83,87) RS1/16S330JR 261 (A,95,87) RS1/16S330J
R 262 (A,85,86) RS1/16S330JR 263 (A,86,86) RS1/16S330JR 264 (A,110,122) CHIP RESISTOR ARRAY RAB4C330JR 265 (A,104,118) CHIP RESISTOR ARRAY RAB4C330JR 266 (A,99,115) RS1/16S0R0J
R 267 (A,110,115) CHIP RESISTOR ARRAY RAB4C330JR 269 (A,91,136) RS1/16S0R0JR 271 (A,104,113) CHIP RESISTOR ARRAY RAB4C330JR 272 (A,96,87) RS1/16S333JR 279 (A,89,134) CHIP RESISTOR RS1/16S2201F
R 284 (A,60,80) RS1/16S103JR 291 (A,72,86) RS1/16S332JR 292 (A,73,85) RS1/16S682JR 293 (A,93,84) RS1/16S332JR 294 (A,90,84) RS1/16S682J
R 313 (A,16,39) RS1/16S104JR 314 (A,15,37) RS1/16S103JR 315 (A,12,37) RS1/16S103JR 318 (A,12,39) RS1/16S104JR 321 (A,19,61) RS1/16S4R7J
R 322 (A,14,61) RS1/16S4R7JR 325 (A,10,57) RS1/16S4R7JR 326 (A,15,57) RS1/16S4R7JR 402 (A,45,200) RS1/16S103JR 406 (A,109,137) RS1/16S103J
R 411 (A,96,131) RS1/16S1500FR 412 (A,100,131) RS1/16S1500FR 413 (A,93,130) RS1/16S1500FR 414 (A,103,131) RS1/16S1500FR 415 (A,107,130) RS1/16S1500F
R 416 (A,110,130) RS1/16S1500FR 421 (A,39,211) RS1/10S75R0FR 422 (A,43,211) RS1/10S75R0FR 423 (A,33,211) RS1/10S75R0FR 424 (A,19,209) RS1/10S75R0F
R 425 (A,10,215) RS1/10S75R0FR 426 (A,29,210) RS1/10S75R0FR 767 (A,51,104) RS1/16S153JR 768 (A,52,101) RS1/16S153JR 769 (A,51,103) RS1/16S330J
R 770 (A,52,100) RS1/16S330J
Mark No. Description Part No.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36052
1 2 3 4
R 771 (A,37,50) RS1/16S221JR 772 (A,31,48) RS1/16S104JR 801 (A,54,29) RS1/16S472JR 906 (A,91,194) RS1/16S100J
R 911 (A,91,191) RS1/16S100JR 914 (A,114,184) RS1/16S103JR 915 (A,116,191) RS1/16S102JR 931 (A,102,184) RS1/16S0R0JR 933 (A,92,199) RS1/16S561J
R 934 (A,92,203) CHIP RESISTOR RS1/16S5100FR 959 (A,117,214) RS1/16S472JR 960 (A,117,217) RS1/16S272JR 961 (A,113,219) RS1/16S472JR 962 (A,115,219) RS1/16S272J
R 966 (A,110,206) RS1/16S473JR 970 (A,112,209) RS1/16S102JR 973 (A,109,209) RS1/16S0R0JR 1101(A,27,97) RS1/16S221JR 1201(A,19,91) RS1/16S103J
R 1202(A,24,87) RS1/16S474JR 1301(A,9,102) RS1/16S473JR 1302(A,9,100) RS1/16S392JR 1303(A,16,113) RS1/16S473JR 1304(A,19,112) RS1/10S561J
R 1306(A,25,109) RS1/16S103JR 1307(A,7,97) RS1/16S472JR 1401(A,114,27) RS1/16S392JR 1402(A,114,30) RS1/16S332JR 1403(A,112,27) RS1/16S473J
R 1404(A,112,30) RS1/16S393JR 1415(A,100,22) RS1/16S182JR 3009(A,48,153) RS1/16S102JR 3010(A,34,153) RS1/16S102JR 3011(A,47,159) RS1/16S223J
R 3012(A,34,155) RS1/16S223JR 3013(A,48,156) RS1/16S223JR 3014(A,34,156) RS1/16S223JR 3017(A,48,150) RS1/16S223JR 3018(A,34,150) RS1/16S223J
R 3019(A,48,151) RS1/16S473JR 3020(A,37,157) RS1/16S473JR 3021(A,45,140) RS1/16S224JR 3022(A,37,143) RS1/16S224JR 3023(A,37,138) RS1/16S102J
R 3024(A,39,143) RS1/16S102JR 3025(A,45,136) RS1/16S102JR 3026(A,44,136) RS1/16S102JR 3027(A,48,154) RS1/16S473JR 3039(A,36,138) RS1/16S153J
R 3040(A,42,144) RS1/16S153JR 3048(A,17,137) RS1/16S182JR 3049(A,22,139) RAB4C101JR 3052(A,22,134) RS1/16S0R0JR 3053(A,31,131) RS1/16S101J
R 3054(A,31,128) RS1/16S101JR 3055(A,27,129) RS1/16S105JR 3056(A,23,129) RS1/16S101JR 3057(A,27,150) RS1/16S0R0JR 3060(A,29,143) RS1/16S0R0J
R 3061(A,37,130) RS1/16S221J
Mark No. Description Part No.R 3062(A,35,125) RS1/16S221JR 3063(A,34,122) RS1/16S221JR 3065(A,47,126) RS1/16S221JR 3066(A,35,118) RS1/16S101J
R 3073(A,18,139) RS1/16S332JR 3081(A,10,164) RS1/16S105JR 3082(A,10,163) RS1/16S105JR 3915(A,69,200) RS1/16S473JR 3951(A,43,65) RS1/16S473J
R 3952(A,35,65) RS1/16S473JR 3955(A,50,65) RS1/16S182JR 5501(A,67,58) RAB4C221JR 5505(A,67,55) RS1/16S221JR 5507(A,67,53) RS1/16S221J
R 5508(A,62,56) RS1/16S222JR 5509(A,67,61) RS1/16S0R0JR 5510(A,62,53) RS1/16S473JR 5513(A,62,39) RS1/16S393JR 5514(A,62,36) RS1/16S683J
R 5515(A,62,41) RS1/16S333JR 5516(A,62,38) RS1/16S153JR 5517(A,66,35) RAB4C221JR 5518(A,62,35) RS1/16S105JR 5519(A,62,32) RS1/16S103J
R 5521(A,66,33) RS1/16S221JR 5527(A,67,25) RAB4C221JR 5531(A,71,25) RS1/16S0R0JR 5541(A,87,25) RAB4C221JR 5543(A,94,10) RS1/16S0R0J
R 5544(A,81,22) RS1/16S0R0JR 5546(A,84,22) RS1/16S103JR 5547(A,84,21) RS1/16S103JR 5548(A,100,29) RAB4C221JR 5557(A,100,36) RAB4C221J
R 5558(A,106,40) RS1/16S473JR 5559(A,112,41) RS1/16S473JR 5562(A,100,39) RS1/16S221JR 5563(A,104,46) RS1/16S103JR 5566(A,100,45) RAB4C221J
R 5569(A,66,39) RS1/16S221JR 5570(A,100,51) RAB4C221JR 5574(A,95,64) RS1/16S104JR 5577(A,100,60) RAB4C221JR 5581(A,98,64) RS1/16S221J
R 5582(A,96,64) RS1/16S221JR 5583(A,92,64) RS1/16S103JR 5584(A,90,64) RS1/16S221JR 5590(A,80,64) RAB4C221JR 5597(A,82,63) RS1/16S153J
R 5712(A,78,184) RS1/16S0R0JR 5713(A,78,190) RS1/16S0R0JR 5943(A,73,212) RS1/16S0R0JR 9402(A,16,198) RS1/16S0R0J
CAPACITORSC 101 (A,40,18) CEAT101M10C 102 (A,40,22) CKSRYB105K10C 103 (A,48,29) CKSRYB105K10C 104 (A,49,34) CKSRYB105K10C 121 (A,48,32) CKSRYB105K6R3
Mark No. Description Part No.
1 2 3 4
C
D
F
A
B
E
53
5 6 7 8
C 131 (A,33,41) CKSRYB104K16C 140 (A,16,15) CKSRYB105K6R3C 144 (A,32,32) CKSRYB222K50C 145 (A,34,31) CKSRYB222K50C 146 (A,34,34) CKSRYB222K50
C 151 (A,49,26) CKSRYB103K50C 152 (A,49,23) CKSRYB103K50C 153 (A,46,21) CKSRYB103K50C 161 (A,32,38) CKSRYB102K50C 200 (A,58,111) CKSRYB104K16
C 201 (A,54,88) CEAT221M6R3C 202 (A,45,112) CEAT221M6R3C 203 (A,46,100) ELECT. CAPACITOR CEAT470M35C 204 (A,54,113) CKSRYB104K16C 205 (A,54,111) CKSRYB104K16
C 206 (A,52,108) ELECT. CAPACITOR CEAT470M35C 207 (A,55,116) CKSRYB104K16C 208 (A,54,76) CKSRYB222K50C 209 (A,51,76) CKSRYB104K16C 210 (A,53,79) CKSRYB222K50
C 211 (A,56,79) CCSRCH101J50C 212 (A,57,76) CCSRCH101J50C 213 (A,54,115) CKSRYB104K16C 215 (A,46,106) ELECT. CAPACITOR CEAT470M35C 216 (A,58,105) CKSRYB104K16
C 217 (A,59,100) CKSRYB104K16C 218 (A,58,108) CKSRYB104K16C 219 (A,58,109) CKSRYB562K50C 220 (A,63,93) CKSRYB104K16C 223 (A,63,146) CEAT100M50
C 224 (A,75,93) CKSRYB104K16C 225 (A,76,93) CKSRYB104K16C 226 (A,88,87) CKSRYB103K50C 227 (A,96,89) CCSRCH221J50C 228 (A,78,134) CKSRYB104K16
C 229 (A,89,92) CKSRYB104K16C 230 (A,94,99) CKSRYB104K16C 231 (A,95,104) CKSRYB104K16C 232 (A,95,106) CKSRYB104K16C 233 (A,96,111) CKSRYB104K16
C 234 (A,95,113) CKSRYB104K16C 235 (A,95,116) CKSRYB104K16C 236 (A,95,118) CKSRYB104K16C 237 (A,103,126) CEAT221M6R3C 238 (A,75,130) CKSRYB104K16
C 239 (A,81,131) CKSRYB104K16C 241 (A,69,147) CEAT100M50C 242 (A,75,147) CEAT100M50C 243 (A,94,127) CKSRYB104K16C 244 (A,95,123) CKSRYB104K16
C 245 (A,88,131) CKSRYB105K6R3C 246 (A,87,130) CKSRYB104K16C 247 (A,84,131) CKSRYB104K16C 248 (A,84,134) CKSRYB104K16C 250 (A,102,122) CKSRYB104K16
C 251 (A,70,135) CCSRCH9R0D50C 252 (A,74,135) CCSRCH120J50C 254 (A,67,135) CKSRYB102K50C 255 (A,60,137) CKSRYB474K10C 256 (A,64,140) CEAT100M50
Mark No. Description Part No.
C 258 (A,64,135) CKSRYB473K25C 259 (A,64,133) CKSRYB473K25C 260 (A,70,131) CKSRYB104K16C 261 (A,76,131) CKSRYB104K16C 262 (A,81,148) CEAT100M50
C 264 (A,66,131) CKSRYB104K16C 265 (A,57,135) CCSRCH220J50C 266 (A,68,131) CKSRYB104K16C 267 (A,58,135) CKSRYB102K50C 268 (A,62,131) CKSRYB104K16
C 269 (A,60,131) CKSRYB333K16C 271 (A,64,130) CKSRYB104K16C 272 (A,59,131) CKSRYB104K16C 273 (A,64,131) CKSRYB104K16C 281 (A,113,85) CEAT221M6R3
C 282 (A,109,84) CKSRYB105K6R3C 283 (A,117,109) CKSRYB104K16C 284 (A,102,98) CKSRYB104K16C 285 (A,101,93) CKSRYB104K16C 286 (A,117,90) CKSRYB104K16
C 287 (A,117,94) CKSRYB104K16C 288 (A,117,99) CKSRYB104K16C 289 (A,86,77) CKSRYB105K6R3C 290 (A,93,75) CKSRYB104K16C 296 (A,84,77) CKSRYB102K50
C 309 (A,10,66) ELECT. CAPACITOR CEAT470M35C 310 (A,16,66) ELECT. CAPACITOR CEAT470M35C 343 (A,58,124) CKSRYB105K6R3C 344 (A,48,117) CKSRYB105K6R3C 345 (A,48,118) CKSRYB105K6R3
C 346 (A,55,122) CKSRYB105K6R3C 347 (A,55,120) CKSRYB105K6R3C 371 (A,15,44) CKSRYB104K16C 372 (A,26,46) CKSRYB104K16C 374 (A,10,49) ELECTR.CAPACITOR CEAT101M6R3
C 401 (A,92,151) CEAT101M16C 402 (A,91,147) CKSRYB104K16C 404 (A,92,144) CEAT101M16C 405 (A,103,138) CKSRYB104K16C 406 (A,45,202) CKSRYB104K16
C 411 (A,97,137) CKSRYB104K16C 412 (A,101,136) CKSRYB105K6R3C 413 (A,95,137) CKSRYB105K6R3C 414 (A,104,136) CKSRYB105K6R3C 415 (A,107,135) CKSRYB104K16
C 416 (A,111,135) CKSRYB104K16C 427 (A,41,186) ELECT. CAPACITOR CEAT102M6R3C 428 (A,41,177) ELECT. CAPACITOR CEAT102M6R3C 429 (A,18,203) ELECT. CAPACITOR CEAT102M6R3C 430 (A,10,210) CEAT471M6R3
C 431 (A,25,204) CEAT471M6R3C 771 (A,35,53) CKSQYB105K16C 773 (A,31,51) CKSRYB104K16C 781 (A,42,45) CEAT100M50C 782 (A,46,58) CKSQYB225K10
C 931 (A,96,186) CKSRYB104K16C 932 (A,97,180) ELECT. CAPACITOR CEAT470M35C 933 (A,94,185) CKSRYB104K16C 934 (A,94,187) CKSRYB102K50C 935 (A,96,166) CKSRYB104K16
Mark No. Description Part No.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36054
1 2 3 4
C 936 (A,113,189) CKSRYB104K16C 942 (A,102,185) CKSRYB104K16C 943 (A,108,185) CKSRYB104K16C 944 (A,92,201) CKSRYB104K16C 945 (A,110,202) CKSRYB562K50
C 946 (A,108,204) CKSRYB104K16C 951 (A,109,210) CKSRYB104K16C 952 (A,109,218) CEAT100M50C 953 (A,91,180) ELECT. CAPACITOR CEAT470M35C 954 (A,91,185) CKSRYB104K16
C 955 (A,94,166) CKSRYB104K16C 956 (A,91,187) CKSRYB102K50C 982 (A,84,164) CKSQYB225K10C 983 (A,80,161) CKSQYB105K16C 984 (A,84,157) CKSRYB104K16
C 985 (A,100,165) CKSRYB104K16C 987 (A,100,172) CKSRYB102K50C 1101(A,27,101) CKSRYB105K6R3C 1103(A,30,97) ELECT. CAPACITOR CEAT470M35C 1201(A,24,97) CKSRYB105K6R3
C 1204(A,27,88) CKSRYB563K16C 1301(A,25,112) CKSRYB105K6R3C 1501(A,61,50) CKSRYB103K50C 1502(A,61,44) CKSRYB104K16C 1505(A,58,54) CEAT101M10
C 3001(A,44,157) CKSRYB103K50C 3011(A,20,182) CEAT100M50C 3012(A,20,188) CEAT100M50C 3019(A,63,165) CEAT100M50C 3020(A,62,172) CEAT100M50
C 3021(A,29,138) CKSRYB104K16C 3022(A,42,143) CKSRYB104K16C 3023(A,31,135) ELECT. CAPACITOR CEAT470M35C 3024(A,40,136) CEAT221M6R3C 3025(A,33,141) CEAT100M50
C 3026(A,33,147) CEAT100M50C 3041(A,19,161) CEAT100M50C 3042(A,22,151) CKSRYB104K16C 3043(A,27,158) CEAT2R2M50C 3044(A,24,151) CKSRYB104K16
C 3045(A,20,155) CEAT100M50C 3046(A,20,151) CKSRYB104K16C 3048(A,17,139) CKSRYB103K50C 3052(A,25,134) CKSRYB104K16C 3056(A,23,127) CCSRCH270J50
C 3057(A,27,127) CCSRCH270J50C 3064(A,43,130) CKSRYB104K16C 3951(A,41,73) CEAT101M16C 3952(A,35,73) CEAT101M16C 5502(A,57,35) CEAT101M10
C 5504(A,62,57) CKSRYB103K50C 5508(A,62,54) CKSRYB103K50C 5509(A,68,50) CKSRYB104K16C 5517(A,68,41) CKSRYB103K50C 5518(A,66,38) CKSRYB104K16
C 5519(A,62,33) CKSRYB103K50C 5521(A,63,28) CKSRYB104K16C 5522(A,64,33) CKSRYB103K50C 5524(A,62,65) CEAT100M50C 5539(A,84,25) CKSRYB104K16
Mark No. Description Part No.
C 5555(A,99,32) CKSRYB104K16C 5557(A,116,38) CKSRYB104K16C 5558(A,106,36) CCSRCH470J50C 5569(A,100,48) CKSRYB103K50C 5577(A,100,57) CKSRYB103K50
C 5578(A,101,62) CKSRYB103K50C 5579(A,93,64) CKSRYB102K50C 5589(A,85,63) CKSRYB104K16C 5601(A,72,6) CKSRYB102K50C 5602(A,77,6) CKSRYB102K50
C 5603(A,81,6) CKSRYB102K50C 5701(A,79,172) CCSRCH101J50C 5703(A,78,176) CCSRCH101J50C 5707(A,75,185) CKSRYB102K50C 5708(A,72,182) ELECT. CAPACITOR CEAT470M35
C DAMP ASSYMISCELLANEOUS
IC 3101(A,22,84) 8CH PWM PROCESSOR IC TAS5508BPAGIC 3191(A,99,139) OP-AMP IC BA10358F
> IC 3201(A,46,54) DIGITAL AMP IC TAS5122DCA> IC 3301(A,46,84) DIGITAL AMP IC TAS5122DCA> IC 3401(A,46,114) DIGITAL AMP IC TAS5122DCA
IC 3901(A,11,27) DUAL OP-AMP NJM4565MDQ 3131(A,37,140) TRANSISTOR 2SA1036KQ 3132(A,36,132) DIGITAL TR(SC-70) RT1N431MD 3101(A,28,57) DIODE MC2846-11D 3131(A,41,137) DIODE UDZS18(B)
D 3191(A,21,124) DIODE UDZS4R7(B)L 3201(A,70,37) INDUCTORS ATH7019L 3202(A,70,54) INDUCTORS ATH7019L 3301(A,70,70) INDUCTORS ATH7019L 3302(A,70,87) INDUCTORS ATH7019
L 3401(A,70,103) INDUCTORS ATH7019L 3402(A,70,120) INDUCTORS ATH7019JA3111JACK XKB3062X 3101(A,18,67) CRYSTAL RESONATOR ASS7062
(13.5MHz) CN3101(A,41,8) 19P PLUG AKM7077
CN3102(A,77,8) 19P PLUG AKM7077CN3201(A,84,140) 2P CONNECTOR B2P-VHCN3211(A,116,96) 6CH SPEAKER JACK(V0) AKE7121
2 PCB BINDER VEF1040
RESISTORSR 3101(A,14,95) RS1/16S221JR 3102(A,14,92) RS1/16S221JR 3103(A,12,58) RS1/16S4R7JR 3104(A,13,78) RAB4C221JR 3106(A,19,73) RS1/16S105J
R 3107(A,22,72) RAB4C470JR 3108(A,26,72) RAB4C470JR 3110(A,29,72) RS1/16S0R0JR 3111(A,28,94) RS1/16S220JR 3112(A,18,97) RS1/16S470J
R 3113(A,15,96) RS1/16S3R3JR 3114(A,28,54) RS1/16S103JR 3131(A,41,140) RS1/16S473JR 3132(A,39,136) RS1/10S123JR 3133(A,39,133) RS1/16S102J
Mark No. Description Part No.
1 2 3 4
C
D
F
A
B
E
55
5 6 7 8
R 3134(A,41,133) RS1/16S222JR 3141(A,100,36) RS1/16S331JR 3142(A,101,30) RS1/16S331JR 3151(A,28,17) RAB4C103JR 3152(A,36,17) RAB4C222J
R 3182(A,16,57) RS1/16S0R0JR 3191(A,108,137) RESISTOR (0.1OHM,2W) ACN7112R 3192(A,101,135) RS1/16S103JR 3193(A,92,140) RS1/16S103JR 3194(A,97,133) RS1/16S104J
R 3195(A,92,141) RS1/16S104JR 3196(A,93,133) RS1/16S222JR 3197(A,90,132) RS1/16S103J
> R 3199(A,94,135) RS1/16S8R2JR 3204(A,33,51) RS1/16S221J
R 3205(A,34,56) RS1/16S103JR 3206(A,36,60) RS1/16S101JR 3207(A,35,60) RS1/16S473JR 3208(A,38,60) RS1/16S472J
> R 3211(A,60,46) RESISTOR (2.7 OHM) ACN7148
> R 3212(A,60,60) RESISTOR (2.7 OHM) ACN7148> R 3213(A,60,48) RESISTOR (2.7 OHM) ACN7148> R 3214(A,60,62) RESISTOR (2.7 OHM) ACN7148
R 3215(A,64,43) CHIP RESISTOR RS1/8S1R5JR 3216(A,64,57) CHIP RESISTOR RS1/8S1R5J
R 3217(A,64,52) CHIP RESISTOR RS1/8S1R5JR 3218(A,64,66) CHIP RESISTOR RS1/8S1R5JR 3223(A,39,43) RS1/10S821JR 3224(A,39,66) RS1/10S821JR 3225(A,39,41) RS1/10S821J
R 3226(A,39,68) RS1/10S821J> R 3227(A,86,35) RS1/10S3R3J> R 3228(A,86,51) RS1/10S3R3J
R 3231(A,104,70) RS1/10S472JR 3232(A,107,70) RS1/10S472J
R 3233(A,100,70) RS1/10S472JR 3234(A,110,70) RS1/10S472J
> R 3235(A,104,69) RS1/16S1R0J> R 3236(A,107,69) RS1/16S1R0J> R 3237(A,101,69) RS1/16S1R0J
> R 3238(A,110,69) RS1/16S1R0J> R 3241(A,58,45) RS1/10S180J> R 3242(A,58,59) RS1/10S180J> R 3243(A,58,49) RS1/10S180J> R 3244(A,58,63) RS1/10S180J
R 3304(A,33,80) RS1/16S221JR 3305(A,34,86) RS1/16S103JR 3306(A,36,90) RS1/16S101JR 3307(A,35,90) RS1/16S473JR 3308(A,38,90) RS1/16S472J
> R 3311(A,60,76) RESISTOR (2.7 OHM) ACN7148> R 3312(A,60,90) RESISTOR (2.7 OHM) ACN7148> R 3313(A,60,78) RESISTOR (2.7 OHM) ACN7148> R 3314(A,60,92) RESISTOR (2.7 OHM) ACN7148
R 3315(A,64,73) CHIP RESISTOR RS1/8S1R5J
R 3316(A,64,87) CHIP RESISTOR RS1/8S1R5JR 3317(A,64,82) CHIP RESISTOR RS1/8S1R5JR 3318(A,64,96) CHIP RESISTOR RS1/8S1R5JR 3323(A,39,73) RS1/10S821JR 3324(A,39,96) RS1/10S821J
Mark No. Description Part No.
R 3325(A,39,71) RS1/10S821JR 3326(A,39,98) RS1/10S821J
> R 3327(A,86,68) RS1/10S3R3J> R 3328(A,86,84) RS1/10S3R3J
R 3331(A,94,98) RS1/10S472J
R 3332(A,94,84) RS1/10S472JR 3333(A,94,94) RS1/10S472JR 3334(A,94,108) RS1/10S472J
> R 3335(A,94,101) RS1/16S1R0J> R 3336(A,94,81) RS1/16S1R0J
> R 3337(A,94,91) RS1/16S1R0J> R 3338(A,94,111) RS1/16S1R0J> R 3341(A,58,75) RS1/10S180J> R 3342(A,58,89) RS1/10S180J> R 3343(A,58,79) RS1/10S180J
> R 3344(A,58,93) RS1/10S180JR 3404(A,33,110) RS1/16S221JR 3405(A,34,116) RS1/16S103JR 3406(A,36,120) RS1/16S101JR 3407(A,35,120) RS1/16S473J
R 3408(A,38,120) RS1/16S472J> R 3411(A,60,106) RESISTOR (2.7 OHM) ACN7148> R 3412(A,60,120) RESISTOR (2.7 OHM) ACN7148> R 3413(A,60,108) RESISTOR (2.7 OHM) ACN7148> R 3414(A,60,122) RESISTOR (2.7 OHM) ACN7148
R 3415(A,64,103) CHIP RESISTOR RS1/8S1R5JR 3416(A,64,117) CHIP RESISTOR RS1/8S1R5JR 3417(A,64,112) CHIP RESISTOR RS1/8S1R5JR 3418(A,64,126) CHIP RESISTOR RS1/8S1R5JR 3423(A,39,103) RS1/10S821J
R 3424(A,39,126) RS1/10S821JR 3425(A,39,101) RS1/10S821JR 3426(A,39,128) RS1/10S821J
> R 3427(A,86,101) RS1/10S3R3J> R 3428(A,86,117) RS1/10S3R3J
R 3431(A,100,122) RS1/10S472JR 3432(A,107,122) RS1/10S472JR 3433(A,104,122) RS1/10S472JR 3434(A,110,122) RS1/10S472J
> R 3435(A,101,124) RS1/16S1R0J
> R 3436(A,107,124) RS1/16S1R0J> R 3437(A,104,124) RS1/16S1R0J> R 3438(A,110,124) RS1/16S1R0J> R 3441(A,58,105) RS1/10S180J> R 3442(A,58,119) RS1/10S180J
> R 3443(A,58,109) RS1/10S180J> R 3444(A,58,123) RS1/10S180J
R 3901(A,11,39) RAB4C472JR 3905(A,17,35) RS1/16S562JR 3906(A,6,35) RS1/16S562J
R 3907(A,15,35) RS1/16S562JR 3908(A,7,35) RS1/16S562JR 3909(A,16,32) RS1/16S183JR 3910(A,6,32) RS1/16S183JR 3911(A,13,32) RS1/16S183J
R 3912(A,9,32) RS1/16S183JR 3913(A,11,43) RS1/16S472JR 3914(A,7,42) RS1/16S472JR 3915(A,12,41) RS1/16S472JR 3916(A,8,43) RS1/16S472J
Mark No. Description Part No.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36056
1 2 3 4
> R 3921(A,12,24) RS1/16S8R2JR 3923(A,12,22) RS1/16S103JR 3924(A,15,22) RS1/16S103J
CAPACITORSC 3101(A,16,92) CKSRYB104K16C 3102(A,14,93) CKSRYB103K50C 3103(A,11,94) CKSRYB104K16C 3104(A,11,91) CKSRYB104K16C 3105(A,14,90) CKSRYB103K50
C 3106(A,12,87) CKSRYB104K16C 3107(A,12,86) CKSRYB104K16C 3108(A,12,72) CEVW100M10C 3109(A,12,84) CKSRYB102K50C 3110(A,16,77) CKSRYB104K16
C 3111(A,12,64) CEVW100M10C 3112(A,17,76) CKSRYB104K16C 3113(A,17,74) CCSRCH180J50C 3114(A,17,73) CCSRCH150J50C 3115(A,28,76) CKSRYB104K16
C 3116(A,28,75) CKSRYB104K16C 3117(A,26,66) CEVW100M10C 3118(A,30,90) CKSRYB104K16C 3119(A,25,94) CKSRYB104K16C 3120(A,26,97) CEVW100M10
C 3141(A,101,36) CCSRCH221J50C 3142(A,101,33) CCSRCH221J50C 3151(A,18,20) CKSRYB104K16C 3192(A,98,135) CKSRYB104K25C 3201(A,40,45) CKSQYB105K16
C 3202(A,40,63) CKSQYB105K16C 3203(A,35,54) CKSRYB104K16C 3204(A,39,60) CKSRYB104K16C 3211(A,59,42) CKSQYB104K50C 3212(A,59,56) CKSQYB104K50
C 3213(A,59,52) CKSQYB104K50C 3214(A,59,66) CKSQYB104K50C 3215(A,65,46) CKSRYB333K50C 3216(A,65,60) CKSRYB333K50C 3217(A,65,48) CKSRYB333K50
C 3218(A,65,62) CKSRYB333K50C 3221(A,91,43) ELECT. CAPACITOR CEAT102M25C 3223(A,86,37) CKSRYB103K50C 3224(A,86,54) CKSRYB103K50C 3225(A,86,48) CKSRYB102K50
C 3226(A,86,65) CKSRYB102K50C 3227(A,49,45) CKSRYB104K25C 3228(A,49,64) CKSRYB104K25C 3231(A,85,45) CFTLA474J50C 3232(A,85,62) CFTLA474J50
C 3233(A,102,83) CKSRYB104K25C 3234(A,108,81) CKSRYB104K25C 3235(A,102,81) CKSRYB104K25C 3236(A,108,78) CKSRYB104K25C 3237(A,104,66) CKSRYB103K50
C 3238(A,107,66) CKSRYB103K50C 3239(A,101,66) CKSRYB103K50C 3240(A,110,66) CKSRYB103K50C 3241(A,56,44) CKSRYB331K50C 3242(A,56,58) CKSRYB331K50
Mark No. Description Part No.
C 3243(A,56,50) CKSRYB331K50C 3244(A,56,64) CKSRYB331K50C 3301(A,40,75) CKSQYB105K16C 3302(A,40,93) CKSQYB105K16C 3303(A,35,84) CKSRYB104K16
C 3304(A,39,90) CKSRYB104K16C 3311(A,59,72) CKSQYB104K50C 3312(A,59,86) CKSQYB104K50C 3313(A,59,82) CKSQYB104K50C 3314(A,59,96) CKSQYB104K50
C 3315(A,65,76) CKSRYB333K50C 3316(A,65,90) CKSRYB333K50C 3317(A,65,78) CKSRYB333K50C 3318(A,65,92) CKSRYB333K50C 3321(A,91,59) ELECT. CAPACITOR CEAT102M25
C 3323(A,86,70) CKSRYB103K50C 3324(A,86,87) CKSRYB103K50C 3325(A,86,81) CKSRYB102K50C 3326(A,86,98) CKSRYB102K50C 3327(A,49,75) CKSRYB104K25
C 3328(A,49,94) CKSRYB104K25C 3331(A,85,78) CFTLA474J50C 3332(A,85,95) CFTLA474J50C 3333(A,102,99) CKSRYB104K25C 3334(A,107,92) CKSRYB104K25
C 3335(A,102,96) CKSRYB104K25C 3336(A,107,95) CKSRYB104K25C 3337(A,94,104) CKSRYB103K50C 3338(A,94,78) CKSRYB103K50C 3339(A,94,88) CKSRYB103K50
C 3340(A,94,114) CKSRYB103K50C 3341(A,56,74) CKSRYB331K50C 3342(A,56,88) CKSRYB331K50C 3343(A,56,80) CKSRYB331K50C 3344(A,56,94) CKSRYB331K50
C 3401(A,40,105) CKSQYB105K16C 3402(A,40,123) CKSQYB105K16C 3403(A,35,114) CKSRYB104K16C 3404(A,39,120) CKSRYB104K16C 3411(A,59,102) CKSQYB104K50
C 3412(A,59,116) CKSQYB104K50C 3413(A,59,112) CKSQYB104K50C 3414(A,59,126) CKSQYB104K50C 3415(A,65,106) CKSRYB333K50C 3416(A,65,120) CKSRYB333K50
C 3417(A,65,108) CKSRYB333K50C 3418(A,65,122) CKSRYB333K50C 3421(A,91,125) ELECT. CAPACITOR CEAT102M25C 3423(A,86,103) CKSRYB103K50C 3424(A,86,120) CKSRYB103K50
C 3425(A,86,114) CKSRYB102K50C 3426(A,86,131) CKSRYB102K50C 3427(A,49,105) CKSRYB104K25C 3428(A,49,124) CKSRYB104K25C 3431(A,85,111) CFTLA474J50
C 3432(A,85,128) CFTLA474J50C 3433(A,102,113) CKSRYB104K25C 3434(A,107,107) CKSRYB104K25C 3435(A,102,111) CKSRYB104K25C 3436(A,107,110) CKSRYB104K25
Mark No. Description Part No.
1 2 3 4
C
D
F
A
B
E
57
5 6 7 8
C 3437(A,101,126) CKSRYB103K50C 3438(A,107,126) CKSRYB103K50C 3439(A,104,126) CKSRYB103K50C 3440(A,110,126) CKSRYB103K50C 3441(A,56,104) CKSRYB331K50
C 3442(A,56,118) CKSRYB331K50C 3443(A,56,110) CKSRYB331K50C 3444(A,56,124) CKSRYB331K50C 3901(A,13,35) CCSRCH681J50C 3902(A,9,35) CCSRCH681J50
C 3903(A,13,36) CCSRCH681J50C 3904(A,9,36) CCSRCH681J50C 3905(A,16,33) CCSRCH181J50C 3906(A,6,33) CCSRCH181J50C 3907(A,13,33) CCSRCH561J50
C 3908(A,9,33) CCSRCH561J50C 3921(A,8,18) CEVW100M25C 3922(A,14,18) CEVW100M16C 3923(A,9,24) CKSRYB104K25C 3924(A,15,24) CKSRYB104K16
D DISPLAY ASSYMISCELLANEOUS
IC 5901(B,141,45) FL DRIVER IC PT6315IC 5902(A,179,44) REMOTE RECEIVER UNIT RPM7540-H9
> L 5901(A,168,46) AXIAL INDUCTOR LAU220JL 5902(A,117,53) AXIAL INDUCTOR LAU100JV 5901(A,168,58) FL TUBE AAV7104
S 5961(A,72,28) SWITCH VSG1024S 5962(A,93,28) SWITCH VSG1024S 5963(A,111,28) SWITCH VSG1024S 5964(A,129,28) SWITCH VSG1024S 5965(A,147,28) SWITCH VSG1024
S 5966(A,165,28) SWITCH VSG1024S 5967(A,183,28) SWITCH VSG1024CN5901(A,110,65) CONNECTOR CKS3378
5971FL SPACER AEB7367
RESISTORSR 5901(B,160,38) RS1/16S221JR 5902(B,156,38) RS1/16S221JR 5903(B,158,38) RS1/16S221JR 5904(B,151,37) RS1/16S823JR 5951(B,174,48) RS1/16S470J
R 5954(B,185,42) RS1/16S101JR 5962(B,101,29) RS1/16S102JR 5963(B,103,29) RS1/16S122JR 5964(B,138,29) RS1/16S152JR 5965(B,173,29) RS1/16S182J
R 5966(B,175,29) RS1/16S102J
CAPACITORSC 5907(A,67,59) ELECT. CAPACITOR CEJQ470M35C 5911(B,165,42) CKSRYB223K50C 5912(B,159,45) CKSRYB223K50C 5913(A,162,46) CEAL470M6R3C 5915(B,134,36) CKSRYB103K50
C 5916(B,114,50) CKSRYB223K50C 5917(B,127,47) CKSRYB223K50C 5918(A,123,46) ELECTR. CAPACITOR CEAL470M35
Mark No. Description Part No.C 5920(B,160,34) CCSRCH221J50C 5921(B,156,34) CCSRCH221J50
C 5922(B,158,34) CCSRCH221J50C 5951(B,184,48) CKSRYB223K50C 5952(A,173,52) CEAL470M6R3
E USB ASSYMISCELLANEOUS
Q 5971(B,48,53) DIGITAL TR(SC-70) RT1P241MQ 5973(B,44,45) TRANSISTOR IMX9Q 5974(B,45,36) TRANSISTOR IMX9D 601 (B,28,27) ZENER DIODE UMZU6.2NL 5971(B,50,32) INDUCTOR CTF1306
L 5972(B,41,32) INDUCTOR CTF1306JA602 (A,19,7) USB CONNECTOR XKP3086JA5901(A,49,9) JACK AKN7003CN5902(A,41,60) CONNECTOR CKS3376
RESISTORSR 5971(B,49,45) RS1/10S680JR 5972(B,39,45) RS1/10S680JR 5973(B,52,45) RS1/10S680JR 5974(B,41,45) RS1/10S680JR 5975(B,54,44) RS1/16S222J
R 5976(B,37,41) RS1/16S222JR 5977(B,54,40) RS1/16S222JR 5978(B,37,37) RS1/16S222JR 5979(B,49,40) RS1/10S680JR 5980(B,39,40) RS1/10S680J
R 5981(B,52,40) RS1/10S680JR 5982(B,41,40) RS1/10S680JR 5983(B,52,36) RS1/16S680JR 5984(B,39,36) RS1/16S680JR 5985(B,50,36) RS1/16S680J
R 5986(B,41,36) RS1/16S680JR 5990(B,39,32) RS1/16S680J
CAPACITORSC 601 (B,31,50) CKSRYB104K50C 602 (A,30,46) CEAT221M6R3C 604 (B,29,23) CKSRYB104K50C 605 (B,29,19) CKSRYB104K50C 5971(B,47,40) CKSRYB102K50
C 5972(B,43,40) CKSRYB102K50C 5973(B,48,30) CKSRYB473K25C 5974(B,43,30) CKSRYB473K25C 5977(B,54,24) CKSRYB103K50
G POWER SUPPLY UNITThis assembly has no service parts.
H FM/AM TUNER UNITThis assembly has no service parts.
Mark No. Description Part No.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36058
1 2 3 4
6. ADJUSTMENT6.1 ADJUSTMENT ITEMS AND LOCATION
6.2 JIGS AND MEASURING INSTRUMENTS
1
2
Adjustment Items
[Mechanism Part]
[Electrical Part]
Tangential and Radial Height Coarse Adjustment
DVD Error Rate Adjustment
Electrical adjustments are not required.
Adjustment Points (Mechanism Part)
Cautions: After adjustment, adjustment screw locks with the Screw tight.
1 2Radialadjustmentscrew
1 2Tangentialadjustmentscrew
Screwdriver (large) TV monitor
Precise screwdriver DVD test disc(GGV1025)
Test mode remote controlunit (GGF1381)
Screw tight(GYL1001)
Screwdriver (medium)
Soldering iron
1 2 3 4
C
D
F
A
B
E
59
5 6 7 8
6.3 NECESSARY ADJUSTMENT POINTS
∗ After adjustment, screw locks with the Screw tight.~, ŸMechanical
point
Electricpoint
Mechanicalpoint
Electricpoint
Mechanicalpoint
Electricpoint
LOAB and DVD MAIN ASSYS
Exchange Parts of Mechanism
Exchange PCB Assy
When Adjustment Points
Exchange the 06SD Pickup Assy
Exchange the Traverse Mechanism Assy-S
Exchange PC Board
∗ After adjustment, screw locks with the Screw tight.ŸMechanical
point
Electricpoint
Exchange the Spindle Motor
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36060
1 2 3 4
6.4 TEST MODE
POWER ON
DSC - &&&
GGF1381Test moderemote controlunit
GGF1381Test moderemote controlunit
<TRAY OPEN> <TRAY CLOSE>
OPEN/CLOSE(Player)
OPEN/CLOSE
Press the play key ( ) of the normal remote control unit.
(Player)
TEST MODE: PLAY
TEST MODE: OFF
An address is displayed
OR
ESC
<PLAY>ESC TEST
CHECKDVD, CD
DVD disc
POWER
ON
OFF
POWER
DISC SET
Notes:• After going into test mode, if you play back the disc, "DISC-NON" is displayed.• The video signal and the audio signal are outputted during the test mode.• The SKIP key and the SCAN key are effective during the test mode.
1 2 3 4
C
D
F
A
B
E
61
5 6 7 8
6.5 MECHANISM ADJUSTMENT
• Remove the 06SD Pickup Assy from the Traverse Mechanism Assy-S.
• Remove the joint and the joint spring of the 06SD Pickup Assy.
• Put the joint between the Tangential (or Radial) adjustment screw and the mechanism base and turn each screw to adjust the height. (Refer to "6.1 ADJUSTMENT ITEMS AND LOCATION".)
START
Tangential and Radial Height Coarse Adjustment1
Note:Before removing the flexible cable for the pickup, soldering of the pickup circuit is necessary.For details, see "7.1.13 DISASSEMBLY".
• Pass through the guide shaft to a new 06SD Pickup Assy.• Attach it to the Traverse Mechanism Assy-S.
• Attach the Traverse Mechanism Assy-S to the 06 LOADER Assy.• Turn it over and attach the joint and the joint spring.• Arrange the flexible cables. (Refer to "7.1.13 DISASSEMBLY".)
7.5mm
Joint
Mechanism base
Guide Shaft
06SD Pickup Assy
Joint VK1B
Joint spring VK1
Hold spring
06SD Pickup Assy
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36062
1 2 3 4
Player
Monitor
• Play the DVD test discat inner track(around #30000)
• Play the DVD test discat outer track(around #200000)
Traverse Mechanism Assy-SAdjust the radial adjustment screw so thatERROR RATE becomes around "5E-4".
Traverse Mechanism Assy-SFasten the radialadjustment screw so thatERROR RATE becomes around "1E-3".
START
DVD Error Rate Adjustment2
ERROR RATE: - - - -
ERROR RATE : "5E-4"ERROR RATE : "1E-3"
Service mode end
Disc playback normally.• The measurement of block error rate
If error rate is OK, locks a root of tangential and radial adjustment screws withthe Screw tight.Screw tight: GYL1001
Turn the POWER OFF in case of NG once, and perform the adjustment once again.
CHP/TIMESC ESC
\ Service mode
Service mode end
ESC
NG
OK
• Play the DVD test discat inner track
• Display ERROR RATE on the monitor
CHP/TIMESC
Notes:• Use disc: GGV1025
• Unfasten the radial adjustment screw by 90 degrees step till ERROR RATE
becomes around "1E-3" again . • Record the number of rotation (N1).
(memorizing how much the screw was rotated.)
• Fasten the radial adjustment screw till the number of rotation becomes harf of N1.
Traverse Mechanism Assy-SFasten the tangentialadjustment screw so thatERROR RATE becomes around "1E-3".
• Unfasten the tangential screw by 90 degrees step till ERROR RATE
becomes around "1E-3" again . • Record the number of rotation (N1).
• Fasten the tangential adjustment screw till the number of rotation becomes harf of N1.
ERROR RATE : "1E-3"
In this check, the error ratethat is less than "5E-5"isbetter.
CHECK
CHP/TIMESC
AB
B
C
Best Radial point
C
Best tangential point
1E-3
5E-4
Rotation of Radial screw and Tangential screw
Anticlock wise Clock wise
Best point
A A
BC
ERROR RATE
1 2 3 4
C
D
F
A
B
E
63
5 6 7 8
7. GENERAL INFORMATION7.1 DIAGNOSIS7.1.1 TEST MODE
Test Mode Functional Specification1 Test mode entry
In the power ON state, press the [ESC] (A8-5F) key and [TEST] (A8-5E) key in order of the Test mode remote control unit. • OSD displays test mode.
2 LD ONEnter the test mode.DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n).CD : Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n).
3 Release the Test mode• Turn off the power.• Press the [ESC] (A8-5F) key of the remote control unit and reset it.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36064
1 2 3 4
7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE
Character in bold : Item name: Information display
1
56
1011
89
3
2
12
15
13
14
1 Address indicationThe address being traced is displayed in number. (as for the DVD, indication of decimal number is possible.)DVD : ID indication (hexadecimal number, 8 digits)
[∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]CD : ID indication [∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]
2 Code indication of remote control unit [R – ∗ ∗ ∗ ∗]In case of double code, display a 2nd code.
3 Main unit keycode indication [K – ∗ ∗]
5 Tracking status [TRKG – ∗ ∗ ∗]Tracking on : [ON]Tracking off : [OFF]
6 Spindle status [SPDL – ∗ ∗ ∗]CLV : [CLV]Off : [OFF]
7 Mechanism (loading) position value [M – ∗ ∗]Unknown : [01] or [41]Open state : [04]Close state : [08]During opening : [12]During closing : [22]
8 Slider position [S – ∗ ∗ ∗ ∗]In Side Switch ON : [01]In Side Switch OFF : [00]
9 Output video system [V – ∗ ∗ ∗ ∗]NTSC system : [NTSC]PAL system : [PAL]Automatic setting : [AUTO]
Scart terminal output [SK – ∗ ∗] (Display only the WY model which can do the output settingof scart terminal.)
VIDEO : [00] S-VIDEO : [01]RGB : [02]
0 Disc sensing [DSC – ∗ ∗ ∗]The type of discs loaded is displayed.[DVD], [CD ]
- Jitter value [J – ∗ ∗ ∗ ∗]Note: Don't use it.
= Version of the FL controller [FL: ∗ ∗ ∗ ∗] Note: Don't use it.
~ Region setting of the player [REG: ∗]Setting value : [1] to [6]
! Destination setting of the FL controller[MDL: ∗ ∗ ∗ ∗ / ∗ ∗ ∗]Four characters in the front represent code 01.Three characters in the back represent the destination code.J: /J, K: /KU, /KC, /KU/KC, R: /RL/RD, RAM : /RAM, LB: /LB, WY: /WY
@ Version of the flash ROM [V: ∗ ∗. ∗ ∗]Flash ROM size [FLASH = ∗ ∗]
7
1 2 3 4
C
D
F
A
B
E
65
5 6 7 8
7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY
• Service mode indication (ESC + CHP/TIM keys)ID AddressThe error rate is always displayed in exponential notation, e.g., ∗.∗ ∗ e - ∗, for both DVDs and CDs.EDC/ID/AV 1 error history (ID Address, EDC/ID Error, last eight errors)
• Calculation of the average error rate (ESC + "5" [Test mode remote control unit] keys)The average of the last eight error rates is calculated and indicated in exponential notation. After the calculation is completed, "OK" or "NG" is displayed. If "NG" is displayed, the disc tray will open (for both DVDs and CDs)For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less
• Indication of model information (ESC + CHAP keys)The items from 12 to 15 of the TEST MODE Indications are displayed. However, in the indications, S in the standard test mode is changed to CHIP VERSION, and M is changed to RF VERSION. For details, see 7.1.4.
• Region confirmation mode (ESC + A.MON [Test mode remote control unit] + "1"-"8" [Test mode remote control unit] keys)After you press the AUDIO key while holding the ESC key pressed and then input the region number, if the number is different from that set in the unit, an error message is displayed, and the tray opens.
Command Contents ConditionsRemote Control
Key NameRemote
Control CodeMemory clear and region / revision indication CLEAR (∗1) A8-45
Average value measurement of DVD error rate 5 (∗1) A8-05
CD error rate measurement 5 (∗1) A8-05
Scart terminal output : VIDEO
WY, models equipped with Scart terminal
AUDIO A3-BE
Scart terminal output : S-VIDEO SUBTITLE A3-36
Scart terminal output : RGB ANGLE A3-B5
Progressive OFFOnly for progressive models
Only for HDMI models
R_SKIP A3-9D
Progressive ON F_SKIP A3-9C
FL indication of ID number STEREO (∗1) A8-4A
ZOOM ON (×4) ZOOM A3-37
Service mode indication (error rate indication, etc.) CHP/TIM (∗1) A8-13
Model information indication CHAP (∗1) A8-40
Title search Input mode INTitle No. inputSearch execution
SIDE A (∗1)Numbers (∗1)
PLAY (∗1)
A8-4DA8-00 to A8-09
A8-17
Region confimation modeA.MON (∗1)
Numbers (∗1)A8-1E
A8-01 to A8-08
Only during normal playback, the following shortcut keys can be assigned by pressing a required key after pressing the ESC key of the remote control unit. To quit, press the ESC key
∗1 : Test mode remote control unit
HDMI Resolution : 1920 x 1080i PROGRAM A3-EC
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36066
1 2 3 4
7.1.4 SPECIFICATION OF MODEL INFORMATION DISPLAY
• Display contents
Character in bold : Item name: Information display
1
2
34
567
9
10
1 Destination indicationDisplay it according to model information set from the FL controller.
2 Region No.3 Part number4 ROM version5 Flash size
6 FL controller version7 CHIP VERSION
9 Remote control code0 Key code of Main unit
To display model information : Press the ESC key then the CHAP key.To close the model information display : Press the ESC key.
Don't care.
1 2 3 4
C
D
F
A
B
E
67
5 6 7 8
7.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE
• Display during Service ModeTo enter Service Mode, press the CHP/TIM key while holding the ESC key pressed.To quit, press the ESC key.
Service mode display1 ID Address2 Error rate (always displayed), in exponential notation
ERROR RATE : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ( ∗ ∗ ∗ ∗ )
• Calculation of the average error rate For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less
3 EDC/ID error history (ID Address, EDC/ID errors, last eight errors)
Note:∗ Error of AV1 is not supported in this player.
Number of error
Indication plan contents
Character in bold : Item name: Information display
12
3
ex) For DVDs
• Step 1
%%e -&
%%e -6 : OK%%e -5 : OK%%e -4 : Refer to Step 2%%e -3 : NG%%e -2 : NG
• Step 2
%%e -4
3.0e -4 : OK4.0e -4 : OK5.0e -4 : OK6.0e -4 : NG7.0e -4 : NG
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36068
1 2 3 4
7.1.6 SERVICE TEST MODE
1. Conditions During Service Test Mode• During Service Test mode, the unit will not be shut down for an emergency even if one of the failures mentioned below
occurs.• After the unit has been shut down in Normal mode for an emergency upon detection of one of the failures mentioned below,
you can turn it on immediately, without waiting for one minute, in Service Test mode.• The accumulated power-on time can be checked during Service Test mode.
2. How to enter Service Test mode• Connect AC power cord with the STEST port (microcomputer terminal IC5501: 43-pin) at High (5 V). (See "Service Test
mode connecting point".)Note: Initial function setting is DVD/CD.
• Connect AC power cord while holding both the VOL– and POWER keys on the main unit pressed. The unit will be turned on, and the following indication will be displayed:
3. How to quit Service Test mode, and conditions for quitting• To quit Service Test mode, turn the power off or disconnect the AC power cord to turn the power off.• When Service Test mode is quit, only data on protection in RAM will be initialized, and data on user settings in RAM will not
be initialized.
4. Indications on the FL display when Service Test mode is entered• Indications on the FL display when Service Test mode is entered differ depending on whether the unit was turned off
normally or shut down for emergency protection, immediately before Service Test mode starts, as follows:
5. Operations during Service Test Mode• Basically, operations in Service Test mode are the same as in Normal mode. However, to indicate that the unit is in
Service Test mode, the following are displayed when the functions are changed:
W e l c o m e
[After a normal power-off]
[After a shutdown caused by an EEPROM (IC5502) failure]
FL display
V O L 0
V O L 0
FL display
V DD VS E R
V DD VS E R
FL display
E E P E R RFL display
V O L 0FL display
V DD VS E R
V O L 0
V DD VS E R
FL display
P R T C T EFL display
FL display
FL display
V D S E RDVD/CD
S B S E RUSB
T X S E RTUNER
O V E R PT E MFL display
FL display
FL display
[After a shutdown caused by an AMP-system failure]
[After a shutdown caused by high-temperature detection]
V O L 0
V DD VS E R
V O L 0
V DD VS E R
D V D P R T C TFL display
FL display
FL display
O C E 2R RFL display
FL display
FL display
[After a shutdown caused by a DVD-system failure]
[After a shutdown 2 caused by over current detection]
V O L 0
V DD VS E R
O C E 1R RFL display
FL display
FL display
[After a shutdown 1 caused by over current detection]
[Functions] [FL display]
N 2 S E RLINE
V
V
V
V
D
U
L
When the function is set to LINE, the Surround setting is fixed to 5-channel STEREO, which is only for Service Test mode. (In Normal mode, it is fixed to 2-channel STEREO.) In such a case, do not check the sound through the headphones, because headphone operation with 5-channel STEREO is not guaranteed. If you wish to check the sound through the headphones, use a function other than LINE.
•
1 2 3 4
C
D
F
A
B
E
69
5 6 7 8
8051
5031
30 1
SID
EC
ON
TA
CT
11
R1415
C1413 R5557
C5555
521
C5569
C5539
IC5501
R5535
5602
C5603
C5601
C5602 C5605
C5604 R5536R5537
R5538R5546
R5547
R5548 R556
R5576
Q5531
R5528
Q5532
530
R5534R5533
R5532R5531
R5541
R5542
R5543R5545
R5566 R5570
Q5533
R5544
569518
D1416D1417
ST
ES
TUT
ES
TV
+10
V+3R3
Service Test Mode connecting point
DVD MAIN ASSYB
Connecting point
SIDE A
6. Failures• Depending on the types of errors, one of the following error messages will be displayed when the unit is turned on:
E E P E R R
P R T C T E
D V D P R T C T
Version of the system-controller
About 3 seconds after
O C E 2R RO C E 1R R
A protection circuit was activated:1. The V+10, V+5 or V+3R3 was short-circuited (See the protection circuit on "3.5 DVD MAIN ASSY (3/5)"),
or the value at V+10, V+5, or V+3R3 exceeded the standard value because of an abnormality in its power section.2. The XPROTECT line up to the system-control computer (PDC133A) was short-circuited by grounding or was broken.
7. Accumulated power-on time display• Hold the STOP key on the unit pressed for 8 seconds during Service Test mode. After the version for the system-control
computer is displayed, the accumulated power-on time is displayed.
P D C 1 3 3 A
Accumulated power-on time 1 0 H 3 0 M
• Power-on time is always counted while the power is on, regardless of unit's functions and operations. However, it is not counted during Standby mode.
• The maximum countable power-on time is 255H59M (255 hours 59 minutes.) The indication will not advance beyond that.• The accumulated power-on time basically cannot be cleared.
Abnormality in the DVD section1. The V+6R8, V+5V, or V+3 was short-circuited, or the value at V+6R8, V+5V, or V+3 exceeded the standard value
because of an abnormality in its power section.2. The VDET line up to the system-control computer (PDC133A) was short-circuited by grounding or was broken.
(See VDET circuit on "3.5 DVD MAIN ASSY (3/5)")
• If "OC ERR 1, 2" is not displayed when the unit is turned on in Normal mode, short-circuiting of the speaker terminals can be suspected. (It causes speaker cable "+", "-" short.)
• If "OC ERR 1, 2" is displayed again when the unit is turned on in Normal mode, the following causes can be suspected:1. One or more of the ICs among the three digital amplifier ICs (IC3201, IC3301, and IC3401: TAS5122DCA) on the
DAMP Assy is in failure.2. The line between one of the above digital amplifier ICs and the speaker terminals is short-circuited.3. The XSD line from one of the above digital amplifier ICs to the system-control computer (PDC133A) i sshort-circuited
by grounding or is broken.
O V E R PT E M
• If "OVERTEMP" is not displayed when the unit is turned on in Normal mode, the unit is normal. The protection circuit was activated because the temperature at the three digital amplifier ICs (IC3201, IC3301, and IC3401: TAS5122DCA)
had become too high. Because it is likely that this was a temporary temperature rise, lower the volume of the speakers.• If "OVERTEMP" is displayed again when the unit is turned on in Normal mode, the following causes can be suspected:
1. One or more of the ICs among the three digital amplifier ICs (IC3201, IC3301, and IC3401: TAS5122DCA) on the DAMP Assy is in failure.
2. The OTW line from one of the above digital amplifier ICs to the system-control computer (PDC133A) is short-circuited by grounding or is broken.
1. Breakage or short-circuiting of the communication line between the µ-COM (IC5501) and the EEPROM (IC5502) can be suspected.
2. A failure in the EEPROM (IC5502) can be suspected.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36070
1 2 3 4
7.1.7 METHOD FOR DIAGNOSING DEGRADATION OF THE LDS ON THE PICKUP ASSY
12
CONTACTSIDE
4
1
SID
EC
ON
TA
CT
24
231
2
13
54
23
3
4 5
1
CO
NT
AC
T S
IDE
1
FCICT
C373
C309
CN103
C371
R325
CN
101C
372
R375
R373
R372
R371
C310R326L308
L309
R374
R315
Q304
R314
R313
R318
Q307R322Q308R321
R310
Q305
C145C146
R135
C144
3C
161
R136
R134
C132
C131
C133
C320
C374
C771
L772
C
IC771
R771
C773R772
C3953
C3954
L3951L3952
C
R3951
R3952
R3954
R3953
CN
5601
2 1
AW
M0
2 1 0
2 1 0
2 1 0
Case when this diagnosis is required : When playback of any disc, including a test disc (DVD: GGV1025, CD: STD-905), won't play or doesn't play
How to diagnoseIn the case mentioned above, degradation of the laser diodes (LDs) mounted on the 06SD Pickup Assy is suspected.Measure the voltage between the two ends of one of the resistors mentioned below.
Measure the voltage between the both ends of R322 or R325 on the DVDM Assy. If the voltage is 0.4 V or higher, the 650-nm LD is degraded.
No playback of a DVD :
Measure the voltage between the both ends of R321 or R326 on the DVDM Assy. If the voltage is 0.4 V or higher, the 780-nm LD is degraded.
No playback of a CD :
If the measurements show degradation of an LD, replace the 06SD Pickup Assy.
DVD MAIN ASSYB
SIDE AFront side
PICKUP ASSY
CN101
1 2 3 4
C
D
F
A
B
E
71
5 6 7 8
7.1.8 DVD TROUBLE SHOOTING
No. Symptoms Diagnosis Contents Possible Defective Points1 The power is not turned on. Are wires of output connector (POWER SUPPLY Unit) and CN1001
(DVDMAIN Assy) disconnected or damaged ?Connector / cable
Check that the following voltage is output :Q1202-source on the DVDMAIN Assy: 3.3V
POWER SUPPLY Unit
2 An opening screen is not displayed on the monitor(The FL display lights. The mechanism does not work.)
Are the signals output from IC201-pin 97 (MDATA) and pin 98 (SCLK) on the DVDMAIN Assy ? (in the range of 0-3V)
DVDMAIN AssyDVD IC (IC201)
Are the signals input into IC5501-pin 50 (MDATA) and pin 51 (SCLK) on the DVDMAIN Assy ? (in the range of 0-3V)
DVDMAIN AssyUCOM (IC5501)
Check that the following voltage are output :Q1302-collector on the DVDMAIN Assy: 5V
DVDMAIN Assy5V Regulator IC (IC751)
Is a resonator (X201: 27MHz) on the DVDMAIN Assy oscillating ?DVDMAIN AssyCrystal resonator (X201)DVD IC (IC201)
• Is a signal input into IC203-pin26 (PCE#) on the DVDMAIN Assy ? (Is a signal "H" for 80 mS and then "L" after the power is turned on ?)→ Communication with flash ROM.
• Are the signals input into IC202-pin 16 (DWE#), pin 19 (DCS#) and pin 38 (SDCLK) on the DVDMAIN Assy ?(Is a signal fluctuating ?)→ Communication with SDRAM
DVDMAIN AssyDVD IC (IC201)Flash ROM (IC203)SDRAM (IC202)
Is a signal output from IC203-pin 28 (PRD#) on the DVDMAIN Assy? (Is a signal fluctuating for several hundred mS after the power is turned on ?)
DVDMAIN AssyFlash ROM (IC203)
Is a signal input into IC5501-pin 67 (DVD ACK) on the DVDMAINAssy ? (Is a signal fluctuating ?)→ Communication with FL Control IC
DVDMAIN AssyDVD IC (IC201)UCOM (IC5501)
Is a signal output from IC5501-pin 78 (XREADY) on the DVD MAIN Assy ? (Is a signal fluctuating in the range of 0-5V ?)
DVDMAIN AssyUCOM (IC5501)
Are the signals output from IC5501-pin 49 (SDATA) on the DVD MAIN Assy ? (in the range of 0-5V)
DVDMAIN AssyDVD IC (IC201)UCOM (IC5501)
Are the signals of IC204-pin 5 (SDA) and pin 6 (SCL) on the DVD MAIN Assy fluctuating for one or two seconds after the power is turned?
DVDMAIN AssyEEPROM (IC204)
3 An opening screen is not displayed on the monitor(The FL display lights. The mechanism works.)
Check the video signal path between DVD IC (DVDMAIN Assy IC201) and video-out terminal (see the block diagram)
DVDMAIN AssyVideo circuit after DVD IC (IC201)
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36072
1 2 3 4
No. Symptoms Diagnosis Contents Possible Defective Points
4A tray cannot be opened.(An opening screen is displayed on the monitor)
Does the voltage of CN104-pin 3 and pin 5 on the DVDMAIN Assy change normally ?Pin 3 (SW2(TRIN)): Tray is fully closed: "L"Pin 5 (SW1(TROUT)): Tray is fully opened: "L"
LOAB AssyTray SW (S101)
Is the signal input into IC101-pin 11 (TROPEN) on the DVDMAIN Assy? At open: 3.3V, At close: 0V
DVDMAIN AssyDVD IC (IC201)
Are the signals output from IC101-pin 1 and pin 2 (CN103-pin 1 and pin 2) on the DVDMAIN Assy ?Pin 2: Approx. 6V during opening tray approx. 0V during closing tray.Pin 1: Approx. 0V during opening tray approx. 6V during closing tray.
DVDMAIN AssyFTS Driver IC (IC101)
Are wires of CN104 and CN103 on the DVDMAIN Assy disconnected or damaged ?
Connector / cable
Does the voltage of CN102-pin 1 on the DVDMAIN Assy change to 0V by pressing the Inside switch.
Inside switch
5Playback impossible(no focusing)
Are the signals output from IC101-pin 3 (FOCS_DRV) and pin 4 (FOCS_RTN) on the DVDMAIN Assy ?
DVDMAIN AssyFTS Driver IC (IC101)
Does 650-nm LD emit light ?Does a pickup lens move up / down ?Does an actuator spring bend ?
Pickup
Are plastic parts damaged ? Or is a shaft detached ?Is the turntable detached or tilted ?
Mechanism section (motor)
Is flexible cable of CN101 on the DVDMAIN Assy disconnected or damaged ?
Flexible cable / connector
Is signal output from IC201-pin 42 (FOSO) on the DVDMAIN Assy ? (Device control of about 1.4 V is output usually. It is fluctuated by about ± 250 mV with focus up / down.)
DVDMAIN AssyDVD IC (IC201)
6Playback impossible(Spindle does not turn)
Are the signals output from IC101-pin 30 (W), pin 33 (V) and pin 35 (U) on the DVDMAIN Assy ?Is pin 26 (STBY) fixed LOW ? (pin 26 is High at playback: 3V)
DVDMAIN AssyFTS Driver IC (IC101)
Is there any part detached from the spindle motor ?Or Is there any foreign object lodged in it ?
Mechanism section(Spindle motor)
Are wires of CN102 on the DVDMAIN Assy disconnected or damaged ?
Flexible cable / connector
Is signal output from IC201-pin 37 (DMSO) on the DVDMAIN Assy ? DVDMAIN AssyDVD IC (IC201)
7Playback impossible(Playback stops)
Does 650-nm LD deteriorate ?If the voltage at each both ends of R322 and R325 on the DVD MAIN Assy is 0.4 V or more, the 650-nm LD is definitely deteriorated.
650-nm LD deteriorated.(When playback of a DVD is impossible)
Does 780-nm LD deteriorate ?If the voltage at each both ends of R321 and R326 on the DVD MAIN Assy is 0.4 V or more, the 780-nm LD is definitely deteriorated.
780-nm LD deteriorated.(When playback of a CD is impossible)
Is there abnormality in FG waveform ? (IC201-pin 50)DVDMAIN AssyFG output : FTS Driver IC (IC101)
Are there scratches or dirt on the disc ? Disc
8Picture disturbance during playback(block noise, freeze, other)
Are there scratches or dirt on the disc ?Is there a problem with the format of the disc ?
Check the video signals.Composite video signal (IC401-pin 25)S video signal (IC401-pin 21, pin 26)RGB video signal (IC401-pin 16, pin 18, pin 20)
Disc
9 No sound(Picture is normal)
Check the waveform (ALCK : IC201-pin 212), (ALRCK : IC201-pin 209), (ABCK : IC201-pin 210), (ASDATA0 : IC201-pin 197).
DVDMAIN AssyDVD IC (IC201)
DVDMAIN AssyDVD IC (IC201)Video IC (IC401, IC451)
1 2 3 4
C
D
F
A
B
E
73
5 6 7 8
Symptoms that may occur when any of the following ICs is in failureIC Symptoms
EEP ROM(DVDMAIN Assy : IC204)
User's data cannot be stored in memory.The ID number is lost.
Flash ROM(DVDMAIN Assy : IC203)
The power cannot be turned on.Downloading of the firmware cannot be performed.
DVD IC(DVDMAIN Assy : IC201)
Any kind of symptoms (no power, a failure in any of the servo, video and audio systems, etc.) may be generated, because the DVD processing is performed by a single chip.
64M SDRAM(DVDMAIN Assy : IC202)
No power.Block noise is generated during playback.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36074
1 2 3 4
7.1.9 ID NUMBER AND ID DATA SETTING
This display appears when the PLAY key is pressed in Step 4. Enter a 9-digit number to compare. The number is also displayed on the FL display.
6
By pressing the CLEAR key without having input a number, the unit returns to Step 2 without doing anything else. Each press of this key after a number has been input deletes one digit.
7
After entering all 9 digits, if you press the PLAY key, the unit compares the numbers input in Steps 2 and 6, and only if the numbers match, that number is set as the ID. Then the unit automatically enters ID DATA Input Mode. If the numbers do not match, the disc tray is opened, and the unit exits ID Number Input Mode.
8
[Player's ID Number Setting] ID Number ? 0 0 0 0 0 0 0 0 1 Compare ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
Input ID Number !
6
[Player's ID Number Setting] ID Number ? 0 0 0 0 0 0 0 0 1 Compare 0 0 0 0 0 0 0 0 1
<PLAY> Enter
Input ID Number !
8
Input ID Number !
After entering all 9 digits, if you press the SEARCH key, the unit unconditionally sets the input number as the ID number. Then the unit automatically enters Player's Data Input Mode. (The SEARCH key is not accepted after all 9 digits have been entered.)
5
[Player's ID Number Setting] ID Number ? 0 0 0 0 0 0 0 0 1
<PLAY> Compare Mode <SEARCH> Enter
4
5
Caution:For the DVD players compatible with DVD-RW, for playback of a DVD-RW disc (CPRM) and for the DVD players possessing HDMI output, for HDCP process, it is necessary that an individual ID number and ID data are set for each player. If the ID number and ID data be not properly set in the manner described below, future operations cannot be guaranteed. The ID number is written on the yellow label at the rear panel of the player.If there is no yellow label, before downloading FLASH ROM, take note of the ID number set following the procedures outlined in "ID Number Confirmation Mode" on the next page.Note: Enter ID numbers while the unit is in Stop mode so that the values set will be immediately written to the flash ROM.
Note: If you press the PLAY button before inputting a 9-digit ID number, the unit returns to Step 6 without doing anything else.
To enter ID Number Input Mode, with no ID number set, such as in a case of immediately after upgrading the firmware, press the ESC key then the STEREO key.
Note: If a previous ID number and ID data, such as a factory-preset ID number and ID data, are maintained, the unit enters ID Number Confirmation Mode when the above keys are pressed. However, if only an ID number is maintained, the unit enters ID Data Input Mode.
ID Number Input Mode
[Player's ID Number Setting] ID Number ? - - - - - - - - -
<CLEAR> Exit
Input ID Number !
1
Enter a 9-digit ID number. The ID number is also displayed on the FL display.
2
By pressing the CLEAR key without having input a number, you can exit this mode. Each press of this key after a number has been input deletes one digit.
3
After entering all 9 digits, if you press the PLAY key, the unit enters Compare mode. Enter the same ID number again. Only if your two input numbers match, the ID number is set. Compare mode helps eliminate mistyping of the ID number.
4
2
3
Note: If you press the PLAY button before inputting a 9-digit ID number, the unit returns to Step 2 without doing anything else.
Setting an ID number or ID data is required in the following case:If "No NUM" or "NO DATA" is displayed on the FL display for a few seconds immediately after the power to the player is turned on or during Stop mode.
JIGS AND MEASURING INSTRUMENTS
DVD Data Disc[GGV1269]
Service Remote Control Unit[GGF1381]
1 2 3 4
C
D
F
A
B
E
75
5 6 7 8
To enter ID Number Confirmation Mode after the ID number and the ID data are set, press the ESC key then the STEREO key.
ID Number Confirmation Mode1
The ID number already set is displayed.(It is also displayed on the FL display.)
2
Enter a 9-digit number for comparison. This is not required when you only wish to check the ID number visually.(The number is also displayed on the FL display.)
3
By pressing the CLEAR key without having input a number, you can exit this mode. Each press of this key after a number has been input deletes one digit.
4
After entering all 9 digits, if you press the PLAY key, the unit compares the number entered in Step 2 with the ID number set, and only if the numbers match, the unit automatically exits ID Number Confirmation Mode. If an ID data has not been entered, the unit enters ID DATA Input Mode. If the numbers do not match, the disc tray is opened, and the unit exits ID Number Confirmation Mode.
5
After entering all 9 digits, if you press the STOP key, the unit compares the number entered in Step 3 with the ID number set, and only if the numbers match, the unit automatically deletes the ID number and exits this mode. If the numbers do not match, the disc tray is opened, and the unit exits this mode.(The STOP key is not accepted after all 9 digits have been entered.)
6
[Player's ID Number Setting] ID Number ? 0 0 0 0 0 0 0 0 1 Compare ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
<CLEAR> Exit
Input ID Number !
3
2
4
[Player's ID Number Setting] ID Number ? 0 0 0 0 0 0 0 0 1 Compare 0 0 0 0 0 0 0 0 1
<PLAY> Enter <STOP> Memory Clear
Input ID Number !
56
Note: If you press the PLAY button before inputting a 9-digit ID number, the unit returns to Step 4 without doing anything else.
• Indication of an ID number already setAn ID number already set is displayed in the following cases:
1) When the ESC key then the CLEAR key are pressed, user settings are cleared, then the ID number set is displayed on the screen. In this case, the ID number is not displayed on the FL display.
2) When the unit enters ID Number Confirmation Mode by your pressing the ESC key then the CLEAR key, the ID number set is displayed. In this case, the ID number is also displayed on the FL display.If you only need to confirm the ID number, you can exit this mode by pressing the CLEAR key or turning off the power.
• Indication when no ID number is setIf no ID number is set, the message "No NUM" flashes on the screen and FL display for a few seconds after the power is turned on or during Stop mode.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36076
1 2 3 4
To enter ID DATA Input Mode, with the ID number set, press the ESC key then the STEREO key.
ID DATA Input Mode1 When writing of the data read from the disc to flash ROM is
completed, "Rom Write OK!" is displayed. After seeing this message, you can exit this mode by pressing the CLEAR key.
5
If the data cannot be read from the disc, "Disc Error!" is displayed on the screen, and the disc is ejected.
6
When the STEREO key is pressed, the unit enters ID DATA Input Mode.
2
If the DVD DATA DISC is loaded in this mode, the unit automatically starts reading the data.(If the DVD DATA DISC has already been loaded, the unit does not start reading the data. In this case, open then close the tray.)
3
To exit this mode, press the CLEAR key. While data are being read from the DVD DATA DISC, you cannot exit this mode.
4
[Player's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1 ] Compare > ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
<CLEAR> Exit <STEREO> ID Data Setting Mode
Input ID Number !
2
[Player's Data Input Mode]
<CLEAR> Exit
Insert The ID Data Disc !
4
[Player's Data Input Mode]
Rom Write OK!
<CLEAR> Exit
5
[Player's Data Input Mode]
Disc Error!
<CLEAR> Exit
6
Note: Whether or not the data have been written to flash ROM can be confirmed by watching for the message "Rom Write OK!" being displayed after the disc is read.
• Indication when the data have not been setIf no ID data are set after the ID number is changed, the message "NO DATA" flashes on the screen and FL display for a few seconds after the power is turned on or during Stop mode.
1 2 3 4
C
D
F
A
B
E
77
5 6 7 8
7.1.10 CIRCUIT DESCRIPTION OF DIGITAL AMP. SECTION
Filterand
Volume
TimingControl
GateDrive
XSDTo UCOM
PCM SignalFromDVD or ADC
3.3V
0V
TAS5508BPAG
PWM Processor section
PWM Processor section
Power Stage section
Power Stage section
Output LPF section
Output LPF section
TAS5122DCA
XOTW
Protection
PCM → PWM GateDrive
20V
0V 0V
0V
The PCM signals output from the DVD decoder or AD converter are input to this section, and their volume and sound quality are digitally adjusted. At the output stage, after conversion from PCM to PWM, the signals are output to the Power stage.
In this section, timing is controlled so that the MOSFETs on the high and low sides will not be turned on simultaneously. The voltage of the PWM signals are raised to drive the gates of the MOSFET, and the PWM signals to drive the speakers are output from the MOSFET at the output stage. Detection and protection functions against short-circuiting of the output signals and temperature exceeding the standard value are also provided.
The carrier elements, high-frequency signals that are unnecessary for these speakers, are eliminated. The signals passed through the LPF will become sine-wave signals, as shown in the figure above.
Attention As a signal to drive the BTL is output from the negative speaker terminal, DO NOT short-circuit between the negative speaker terminal and ground, such as the chassis.
Power Stage ICs No. Protection Enable StateIC3201 SD_AB (23pin) ⇒ LIC3301 SD_CD (24pin) ⇒ LIC3401 OTW (25pin) ⇒ L
IC3101 IC3201, IC3301, IC3401
*1 XSD : SD_AB (23pin), SD_CD (24pin) *2 XOTW : OTW (25pin)
*1
*2
If the detection and protection work, the ports of the power stage ICs become the following state.
R
L
R L
FRONT CENTER
SURROUNDSUB
WOOFER
R L
EO
DEO
COMPONENTVIDEO
CR/PR
CB/PB
Y
AUDIO IN
LINE
SPEAKERS
AC IN
VIDEO OUT
Negative Speaker Terminal
Ground (Chassis)
Do not short-circuit
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36078
1 2 3 4
7.1.11 SPECIFICATIONS FOR THE PROTECTION CIRCUITS FOR THE DIGITAL AMPLIFIER
The protection circuits for the Digital Amplifier are activated, following the specifications shown below. The error indication on the FL display shows the reason a protection circuit was activated.Upon diagnosis of the Digital Amplifier, refer to the specifications for the protection circuits here and the overview of the Digital Amplifier circuitry.
1. OverviewThe system microcomputer monitors the ports for shutdown requests (Pin 23:SD_AB and Pin 24: SD_CD) and the ports for abnormal-temperature detection (Pin 25: /OTW) of the Power Stage ICs (IC3201, IC3301, and IC3401). As soon as any abnormality is detected, it shuts the unit down. To notify the user of the possibility of a too high a volume, when the unit is turned on the next time, the volume level will be set to 0, and an error message will be displayed on the FL display.
2. Ports on the system microcomputer to be used for detection
Pin 77: SHUTDOWNLow voltage at this pin means overcurrent or voltage too low (= V+B27) at a Power Stage IC.
Pin 79: XOTWLow voltage at this pin means the temperature at the Power Stage ICs exceeded 125°C.
Note: As one Power Stage IC is provided with two channels, three Power Stage ICs (in total 6 channels) are mounted inthis unit. For abnormality detection, the unit implements a logical OR operation regarding these three ICs.Therefore, which IC is abnormal cannot be known directly. To find which IC is abnormal, it ischeck the PWM outputs (35, 38, 47, 50 pin) of the each power stage ICs (IC3201, IC3301, IC3401).
3. Detection timing
Start : Detection starts 500 ms after the PWRCONT 2 port (Pin 84) of the system microcomputer becomes active by your pressing the STANDBY/ON key.
Finish : When the STANDBY/ON key is pressed again (when the power-off process starts).
4. Operation of the protection circuitsThe following three protection circuits are activated when the conditions shown below are met:
Overcurrent detection: Indication on the FL display: OC ERRORConditions: If the SHUTDOWN ports, which are monitored every 10 ms, become low 7 out of 10 times. (If they become
low 7 times in succession, the conditions are met at that point.)
Abnormal temperature detection 1: Indication on the FL display: OVERTEMPConditions: If the XOTW ports, which are monitored every 10 ms, become low in succession for one minute.
Abnormal temperature detection 2: Indication on the FL display: OVERTEMP(Prerequisite: The XOTW ports, which are monitored every 10 ms, become low three times in succession.)Conditions: The above prerequisite is upheld, and the conditions for an overcurrent detection are met.
5. Process when the protection circuits are activatedThe unit is shut down within 30 ms after abnormality detection then the volume level is set to 0. The unit can be turned on immediately after the shutdown.
1 2 3 4
C
D
F
A
B
E
79
5 6 7 8
7.1.12 PASS/FAIL TEST PROCEDURE OF HDMI TRANSMITTER IC
In a case where the HDMI video signal is not output1
In a case where the HDMI audio signal is not output2
Is the analog video signal output?
Yes
No
OKNG
Malfunctions are caused around IC201 BE IC or in IC201.
Is the signal as described above sent to the input of IC931?
Yes
Yes
Is the HDMI image output?
No
Malfunctions are caused in the output line between IC931 and CN931. Check the HDMI connector, as well.
Check if the HOME MENU or VCD playback picture is displayed when this unit is connected to a PC monitor equipped with a DVI input.Purpose: To check if the HDMI output line, including the
terminal, is in failure.(An HDMI↔DVI conversion cable is required for checking.)
Pass/fail test of BE IC (IC201: DVD MAIN Assy)Conduct proving of R264, R265, R267 and R271 (33 ohms × 44 set), and R266 (27 MHz clock) with an oscilloscope to check whether each signal varies in amplitude between H (3.3 V) and L at reproducing VCD, and whether 27 MHz clock is correctly output.
Malfunctions are caused in HDMI IC (IC931 : DVD MAIN ASSY) or in the output line between IC931 and CN931. In this regard, the frequency is around 1 GHz at the CLK and DATA line between IC931 and CN931, which makes it difficult to observe the waveform by a general oscilloscope. Check the connection with the HDMI connector and the HDMI cable, as well.
NG
Yes
Change mode.The initial setting provides no sound. Has HDMI sound been changed in STAND-BY MENU?
No
Is a correct signal found by proving the output of 216 pin and 211 pin of IC201, R248 (HSPDIF) and R240 (HCLK : 22/24MHz clock) with an oscilloscope?
Check if the initialization process for HDCP, etc. is OK by connecting this unit with a Pioneer Plasma Display equipped with an HDMI input.
Yes
OK
YesMalfunctions in IC931.
NoMalfunctions around IC931.
NoMalfunctions in IC201.
Malfunctions are caused around IC201 BE IC.No
The HDMI transmitter IC (HDCP process block) may be in failure.Change IC201 or IC931.
The customer's monitor may not be compatible with this unit. Confirm the name of manufacturer and model of the monitor, and get a specific description of the failure. Then look for an identical case in a collection of past cases, or consult the design section. In some cases, upgrading the software or firmware for both the DVD player and the monitor will solve the problem.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36080
1 2 3 4
7.1.13 DISASSEMBLY
1 Remove the bonnet case by removing the nine screws.
2 Press the STANDBY/ON button to turn on the power.
3 Press the 0 OPEN/CLOSE button to open the tray.
4 Remove the tray panel.
5 Set the test disc.
6 Press the 0 OPEN/CLOSE button to close the tray.(Test disc is clamped.)
7 Press the STANDBY/ON button to turn off the power.
8 Pull out the Power cord.
Bonnet Case, Tray Panel1
3 6
5
4
Tray panel
Screwdriver (small)
Screwdriver (small)
06 LOADER Assy
Tray openSlit
Test disc
Tray
How to open the tray when the power cannot be onInsert a screwdriver (small) into the slit located at the bottom of the unit, and slide the projection of the drive cam in the 06 LOADER Assy in the direction of the arrow, as indicated in the photo. If the tray pops out a little, fully pull it out by hand.
Diagnosis of PCB's
Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury.Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
72
Drive cam
Projection
63
Bottom view
1 2 3 4
C
D
F
A
B
E
81
5 6 7 8
1 Remove the eight hooks.
2 Remove the front panel section.
Front panel section2Front panel section
2
1 1
×2
Rear view
06 LOADER Assy
3 3
4
1 Short-circuit point by soldering.
2 Disconnect the four connectors.
Note: After replacement, connect the flexible cable, then remove the soldered joint (open).
3 Remove the two screws.
4 Remove the 06 LOADER Assy.
11 ×2
1
06SD Pickup Assy
Removing the Traverse Mechanism Assy-S and 06SD Pickup Assy-S
06 LOADER Assy1
11
Note: Do not use an electric screwdriver. If the screws are over-tightened, the screw threads may be damaged.
*Notes of assembly
Note: Do not touch the bottom side of the 06SD Pickup Assy. If touched, the optical axis may be shifted.
22 2
2
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36082
1 2 3 4
1 Remove the one screw.
2 Remove the bridge 04.
3 Pull out the tray, then remove it by pressing the hook.
1
2
3
Bridge 04
Front side
Hook
Tray
Loading base Triangle
PinDrive cam
-1
3 -2
Note when reinserting the trayWhen reinserting the tray, first align the triangle printed on the loading base and the pin of the drive cam, then insert the tray.
Bridge 04, Tray2
1 2 3 4
C
D
F
A
B
E
83
5 6 7 8
1
Traverse Mechanism Assy-S3
Dislodge the two flexible cables from their factory placement.
2 Unhook the four hooks.
3 Remove the Traverse Mechanism Assy-S. × 22
× 22
3
Traverse Mechanism Assy-S
1
1
Front Side
Flexible cable for the spindle motor
Flexible cable for the pickup
Bottom view
Note: Do not touch the IC for the optical axis. If touched, the optical axis may be shifted.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36084
1 2 3 4
3
22
Adjustment screw(skew screw VK1)
Adjustment screw(skew screw VK1)
Adjustment screw(skew screw VK1)
Adjustment spring(skew spring VK1)
06SD Pickup Assy-S4
Note: The 06SD Pickup Assy can be removed without removing the Traverse MechanismAssy-S. (shown as Step 3.)
Note: Be careful not to lose the adjustment spring (skew spring VK1).
Flexible cable for the pickup
06SD Pickup Assy
1
Front Side1 Disconnect the flexible cable for the pickup.
2 Remove the two adjustment screws.
3 Remove the 06SD Pickup Assy.
Bottom view
06SD Pickup Assy
Note: Do not touch the IC for the optical axis. If touched, the optical axis may be shifted.
1 2 3 4
C
D
F
A
B
E
85
5 6 7 8
Note: The screw is secured with the silicone adhesive. Make sure to apply the silicone adhesive afterreattaching the screw.
4 Remove the one screw.
4Silicone AdhesiveGEM1037
06SD Pickup Assy
Joint VK1B
Joint spring VK1
Hold spring
: Conductive surface
Arrangement of the flexible cable for the spindle motor
Front Side
Hook
Hook
[Caution]DO NOT touch the OE IC.It occurs out of the optical axis due to the shock.
Bottom view
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36086
1 2 3 4
Note: Be sure to move the 06SD Pickup Assy to the innermost perimeter.
: Conductive surface
Arrangement of the flexible cable for the pickup
3
7
2 Attach the flexible cable for the pickup to the connector.
6 Fold the flexible cable along the hook.
7 Pass the flexible cable through the hook.
3
4 5
5 Pass the flexible cable through the hook.
4 Hook the part folded in Step 1 to the hook.
HookReference line
6
1 Fold the flexible cable for the pickup with the backing outwardin the illustration below.
Hook Hook
Hook
Hook
Hook
Front Side Bottom View
2
Backing
Pass the flexible cable through the hook.
Make sure that the cable is loose
Hold Spring
Reference line17 mm
88 mm
1 2 3 4
C
D
F
A
B
E
87
5 6 7 8
7.2 PARTS7.2.1 IC
PDC133A (DVDMAIN ASSY : IC5501)• System Control Microcomputer
Pin Function
No. Mark Pin Name I/O Pin Function1 PA3/WR# O
2 PA4/RD# O
3 PA5/RS O
4 P70 / INT0 / T0LCP / AN8 ACDET
FLDAT
XFLCS
FLCLK
I Powerdown Detection
Clock for FL driver
Chip enable for FL driver
Data for FL driver
5 P71 / INT1 / T0HCP / AN9 P_ON I REMOCON 2 ( Power On )
6 P72 / INT2 / T0IN RDSCLK I (O) Clock input from RDS decoder (Interruption 2)/ non-RDS model = Low output
7 P73 / INT3 / T0IN REMOCON I REMOCON signal input (Interruption 3)
8 RES# XRESET I µ -com reset input
9 XT1 / AN10 XT1 − Subclock (connect to VDD when no use)
10 XT2 / AN11 XT2 − Subclock (leave open when no use, and set the bit 6 of OCR SFR)
11 VSS1 VSS1 −12 CF1 CF1 − Main Clock (connect to VDD when no use)
13 CF2 CF2 − Main Clock (leave open when no use)
14 VDD1 VDD1 −15 P80 / AN0 SIMUKE I Destination distinction input
16 P81 / AN1 MODEL I Model distinction input
17 P82 / AN2 I
18 P83 / AN3 I
19 P84 / AN4 KEY2 I Key2 input
VDET DVD3.3V detection input
20 P85 / AN5 O
21 P86 / AN6 PCONFIG
DIRERR
KEY1
I POWER CONFIG INPUT
LOCK/UNLOCK from DIR
Key1 input
22 P87 / AN7 XPROTECT I Protection and Fan Error detection input
23 P10 / SO0 DSPDI O Data output to DSP (MOTOROLA) and DIR
24 P11 / SI0 / SB0 DSPDO O Data input from DSP (MOTOROLA)
25 P12 / SCK0 DSPCK O Clock output to DSP (MOTOROLA) and DIR
26 P13 / SO1 O
27 P14 / SI1 / SB1 DASDA
XTVMUTE
I /O I2C data for D-AMP
Control mute of SCART (Audio)
28 P15 / SCK1 DASCK O I2C clock for D-AMP
29 P16 / T1PWML O
30 P17 / T1PWMH/BUZ O
31 PE0 O
32 PE1 O
33 PE2 ADMD O Control of DSPMUTE combining DIRERR., "L" at digital mode, "H" at analog mode.
AUDIO INPUT SELECT B
INPUTSELA AUDIO INPUT SELECT A
34 PE3 O
35 PE4 DSPMUTE
XADPDN
O MUTE requeat to DSP MODULE
POWER DOWN for A/D
36 PE5 LED
XRECMUTE
XHPMUTE
O Control of LED
37 PE6 XDEC MUTE
INPUTSELB
O Detection of 1stDSP boot success from DSP MODULE
38 PE7 DSPHREQ O Error detection from DSP (MOTOROLA)
39 VSS4 VSS4 −
HP MUTE ON/OFF
REC OUTPUT MUTE ON/OFF
40 VDD4 VDD4 −
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
• List of ICPDC133A, MT1389FE/H-L, AK5358ET
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36088
1 2 3 4
No. Mark Pin Name I/O Pin Function41 PF0 I
42 PF1 I
43 PF2 STEST
XFLAGS
BUSY
I Set TESTMODE for Service
Detect USB error?
For MCACC FUNCTION
44 PF3 UTEST I Set UNITCHECK for checker
45 PF4 XDSPSS O Slave selection to DSP(MOTOROLA)
46 PF5 XDSPRST O RESET to DSP(MOTOROLA) MODULE
47 PF6 O
48 PF7 O
49 SI2P0/SO2 SDATA
DATASEL
DSPMODE
O System bus data output (AMP side output)
Data Selector for modulater
Selection of MCACC function
50 SI2P1/SI2/SB2 MDATA I System bus data input (AMP side input)
51 SI2P2/SCK2 SCLK I System bus clock input
52 SI2P3/SCK20 TXCE O Chip enable for tuner LSI
53 PWM1 O
54 PWM0 O
55 VDD2 VDD2 −56 VSS2 VSS2 −57 P00 EEP_CS O EEPROM CHIP SELECT
58 P01 EEP_DO O EEPROM DATA OUT
59 P02 O
60 P03 EEP_SK O EEPROM CLOCK
(UTESTCHK) for POWER CONFIG TEST / Unit TEST check
61 P04 TXCLK O Clock for tuner LSI
62 P05 TXODATA O Data for tuner LSI
63 P06 O
64 P07 RDSPOW O Control power supply of RDS (L: POWER ON)
(UTESTEEPOK) for POWER CONFIG TEST / Unit TEST EEPROM check
65 P20/INT4/T1IN RDSDATA I (O) Input RDS data/ non-RDS model = Low output
66 P21/INT4/T1IN TXIDATA I Input data from tuner LSI
67 P22/INT4/T1IN DVDACK I Ackknowlegement from DVD MODULE(Interruption 4)
68 P23/INT4/T1IN EEP_DI I EEPROM DATA IN
69 P24/INT5/T1IN KEY1 I Key1 input ( PowerOn/Standby key only)
70 P25/INT5/T1IN XDARST O RESET for D-AMP
71 P26/INT5/T1IN XDAPDN O POWER DOWN for D-AMP
72 P27/INT5/T1IN XDAMUTE O D-AMP MUTE (use only for non-DSP model)
73 P30 USBPOWER O Contorl Power Supply for USB
74 P31 (DIGSEL) O DIGITAL INPUT SELECT
75 P32/UTX1 SR+TX O UART Tx of SR+ function
76 P33/URX1 SR+RX O UART Rx of SR+ function
77 P34/UTX2 SHUTDWN I D-AMP SHUTDOWN detection
78 P35/URX2 XREADY O XREADY for DVD module
79 P36 XOTW I D-AMP Over Temperature Warning
80 PB7/D7 XDVDRST O RESET to DVD MODULE
1 2 3 4
C
D
F
A
B
E
89
5 6 7 8
No. Mark Pin Name I/O Pin Function81 PB6/D6 DVDPOWER O Control power supply for DVD module
82 PB5/D5 HPSEL O TAS5508 HP_SEL
83 PB4/D4 HPDET I Detect to insert headphone
84 PB3/D3 PWRCONT O Power control for Sub SMPS
85 PB2/D2 (FLCONT) O FL Power
86 PB1/D1 BEATCUT1 O BEATCUT Control 1
87 PB0/D0 BEATCUT2 O BEATCUT Control 2
88 VSS3 VSS3 −89 VDD3 VDD3 −90 PC7/A7 FLASHE/D I(O) for FLASH writing / On board debugger
91 PC6/A6 FLASHDO O for FLASH writing / On board debugger
92 PC5/A5 FLASHCLK O for FLASH writing / On board debugger
93 PC4/A4 (SWMIX) O Control for subwoofer mix
94 PC3/A3 (UTESTMODE O for POWER CONFIG TEST /UNIT TEST MODE
95 PC2/A2 (DMUTECHECK) O D-AMP SOFT MUTE MONITOR
96 PC1/A1 FANCONT O Control fan speed
97 PC0/A0 (DTSMIX) O Control for dts mix
98 PA0/CS2# XDIRRST O Reset to DIR /CODEC
99 PA1/CS1# XDIRCS O Chip select to DIR/CODEC
100 PA2/CS0# DIRDO O Data input from DIR/CODEC
• Port0 (P00-P07) can be selected for input or output by each 4 bits (P00-P03,P04-P07). Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option.• Port1 (P10-P17) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit in option.• Port2 (P20-P27) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit in option.• Port3 (P30-P36) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option.• Port7 (P70-P73) can be selected for input or output by each 1 bit. Set for input when reset.• Port8 (P80-P87) can be selected for input or output by each 1 bit. Set for input when reset. • PortA (PA0-PA5) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit in option.• PortB (PB0-PB7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit in option.• PortC (PC0-PC7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option.• PortE and PortF can be selected for input or output by each 2 bits.
• In case of without RDS, it is best that RDSDATA and RDSCLK are assigned as I/O port which can be set output and output low level.
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36090
1 2 3 4
IOA2DVDD18
TDO / V_ADIN7
MT1389FE/H-L (DVDMAIN ASSY : IC201)• DVD IC
1
OS
N
234
DVDRFIP5
DVDRFIN6
MA7
MB8
MC9
MD1011
SB12
SC13
SD14
CDFON15
CDFOP16
TNI17
TPI18
MDI119
MDI220
LDO221
LDO122
V2REFO
23
VREFO
24
V20
25
TEO
26
FEO
272829
RF
RP
DC
30
RF
RP
AC
31
AD
CV
SS
32
RF
VD
D3
3334353637383940414243444546474849505152535455565758596061626364
256
IRE
F25
5R
FG
C25
425
3
RFLVL / RFON
252
251
250
249
248
247
246
245
244
243
242
241
240
239
238
237
236
235
234
233
232
231
230
229
228
227
226
225
224
223
222
221
220
219
218
217
216
215
214
213
212
211
210
209
208
207
206
205
204
203
202
201
200
199
198
197
196
195
194
193
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192
SA
IOO
E#
DV
DD
18
IOA3IOA4
TCK / V_ADIN6
DMO
USBP
FMO
IOA5IOA6IOA7
AD
1
HIG
HA
2
AD
4
DV
SS
AD
2A
D3
HIGHA0
HIG
HA
3
IOA
20H
IGH
A1
HIG
HA
5
ALE
IOA
21
A17
AD
6
HIG
HA
4
HIG
HA
6H
IGH
A7
A16
IOA
0
IOA18IOA19
IOC
S#
PR
ST
#IC
E
AD
0
IO_1
9
UP
3_0
UP
3_5
UP
3_1
RD
1
RD
3
RD
0
BA1RA10RA0
DVDD18
RD8IO_18
RA2
DQM1RWE#
DVDD3
RD
5
DVSS
UW
R#
RD
15R
D14
RD
13R
D12
RD
11R
D10
RD
9
IOA
1
IOW
R#
UP
1_3
UP
1_4
UP
1_5
UP
1_6
UP
1_7
UP
3_4
DV
DD
3
DQ
M0
UR
D#
DV
SS
RAS#
DV
DD
3
Y_7/IO_16Y_6/IO_15
DVDD3
RD
2
Y_5/IO_14DVDD18
TROFOO
PLL
VS
S
XT
ALI
RF
GN
D18
AD
AC
VD
D2
IDA
CE
XLP
RF
VD
D18
CR
TP
LP
JIT
FN
JIT
FO
TROPENPWMPWMOUT1 / V_ADIN9
GP
IO_4
AS
DA
TA
2/G
PO
_0
SP
LRC
K
INT
0#
SP
DIF
AD
AC
VS
S1
AC
LK
AS
DA
TA
0/G
PO
_2
RC
LKB
/GP
IO_5
VR
EF
YUV2/C
SP
BC
K
SP
DA
TA
USB_VSS
IR
AD
AC
VD
D1
ALF
/AG
PIO
_1
DA
CV
DD
C
FS
RV
RE
F/G
PIO
_6
AB
CK
ALR
CK
DV
DD
3
GP
IO_3
AS
DA
TA
1/G
PO
_1
LPF
IP
PLL
VD
D3
YUVCLK/IO_8
Y_3/IO_12
Y_1/IO_10Y_0/IO_9
DVDD18
BA0
CKE
RD
7
C_5/IO_5
RCLK
RA11RA9RA8
C_6/IO_6
C_2/IO_2
DVDD3C_4/IO_4C_3/IO_3
YUV6/B
C_0/IO_0IO_17
HSYN/V_ADIN2
VSYN/V_ADIN1YUV7
DVSS
DACVDDAYUV4/GDACVSSA
TMS / V_ADIN5
AS
DA
TA
4
DACVSSB
AP
LLV
SS
AP
LLC
AP
Y_4/IO_13
DV
DD
18
AP
LLV
DD
MC
_DA
TA
RA1
DACVDDB
YU
V0/
CIN
YUV1/YDACVSSC
AD
AC
VS
S2
AR
F/A
GP
IO_0
AV
CM
AR
/S
DA
TA
1
DVDD3
RD
6
RCS#
RA5RA6
CAS#
C_1/IO_1
DV
DD
3
C_7/IO_7
YUV6/R
AR
S/S
DA
TA
3
AD
5
RA4
AV
DD
3
AGND
SVDD3
SGND
AS
DA
TA
3
AD
CV
DD
3
HR
FZ
C
TEZISLV
CSO / RFOP
CAPPADVPLLVDD3
DVDADVDBDVDCDVDD
SP
MC
LK
VPLLVSS
AD
7
RA7
RA3
Y_2/IO_11
FG/V_ADIN8USB_VDD3
USBM
TDI / V_ADIN4
OP_INP
OP_OUTOP_INN
YUV3/CVBS
UP
1_2
RD
4
XT
ALO
LPF
ON
LPF
INLP
FO
P
AF
GN
DO
SP
ALS
/SD
AT
A0
AL
/SD
AT
A2
Pin Arrangement (Top view)
1 2 3 4
C
D
F
A
B
E
91
5 6 7 8
Block Diagram
DVDPUH
Module
MotorDrive
Servo I/O
ServoProcessor
AudioDSP
AudioOutput
ExternalAudio DAC
CVBS, Y/CComponent Video
SPDIF
PCMSystemParser
CPPM/CPRMDRM
32-bitRISC
DebugPort 108 MHz
TV Encoder
VideoProcessor
MPEG-1/2JPEG
Video Decoder
DeinterlacerSpindleControl
MemoryController
SystemCPU
Flash ROM
DRAM
GPIO
IR/VFD
RFAmplifier
Digital Video
VideoDAC
5.1ch AudioAudioDAC
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36092
1 2 3 4
Pin Function
RF Interface (28)
VPLL (3)
ALPC (4)
No. Name Alt. I/O Function232 RFVDD18 Power Analog power 1.8V
252 OSP Analog output RF Offset cancellation capacitor connecting
Analog output RF Offset cancellation capacitor connecting253 OSN
254 RFGC Analog output
256 AVDD3 Power Analog power 3.3V
RF AGC loop capacitor connecting for DVD-ROM
255 IREF Analog InputCurrent reference input. It generates reference current for RF path.Connect an external 15K resistor to this pin and AVSS.
1 AGND Ground Analog ground
2 DVDA Analog Input AC coupled input path A
3 DVDB Analog Input AC coupled input path B
4 DVDC Analog Input AC coupled input path C
5 DVDD Analog Input AC coupled input path D
6 DVDRFIP Analog Input AC coupled DVD RF signal input RFIP
7 DVDRFIN Analog Input AC coupled DVD RF signal input RFIN
8 MA Analog Input DC coupled main-beam RF signal input A
9 MB Analog Input DC coupled main-beam RF signal input B
10 MC Analog Input DC coupled main-beam RF signal input C
11 MD Analog Input DC coupled main-beam RF signal input D
12 SA Analog Input DC coupled sub-beam RF signal input A
13 SB Analog Input DC coupled sub-beam RF signal input B
14 SC Analog Input DC coupled sub-beam RF signal input C
15 SD Analog Input DC coupled sub-beam RF signal input D
16 CDFON Analog Input CD focusing error negative input
17 CDFOP Analog Input CD focusing error positive input
18 TNI Analog Input 3 beam satellite PD signal negative input
19 TPI Analog Input 3 beam satellite PD signal positive input
No. Name Alt. I/O Function20 MDI1 Analog Input Laser power monitor input
21 MDI2 Analog Input Laser power monitor input
22 LDO2 Analog Output Laser driver output
23 LDO1 Analog Output
Analog Iutout
Laser driver output
No. Name Alt. I/O Function43 VPLLVSS Ground Analog ground for VPLL
VPLL External Capacitance connection44 CAPPAD
45 VPLLVDD3 Power Analog 3.3V Power for VPLL
ADC Power (2)
Reference Voltage (3)
Analog output
No. Name Alt. I/O Function28 V2REFO Analog output Reference voltage 2.8V
Reference voltage 2.0V29 V20
30 VREFO Analog output Reference voltage 1.4V
No. Name Alt. I/O Function244 ADCVDD3 Power Analog 3.3V Power for ADC
245 ADCVSS Ground Analog ground for ADC
1 2 3 4
C
D
F
A
B
E
93
5 6 7 8
Motor and Actuator Driver Interface (10)
RF Data PLL Interface (9)
Analog Monitor Output (7)
No. Name Alt. I/O Function24 SVDD3 Power Analog power 3.3V
25 CSO RFOP Analog output Central servo Positive main beam summing output
26 RFLVL RFON Analog output RFRP low pass, or Negative main beam summing output
27 SGND Ground Analog ground
31 FEO Analog output Focus error monitor output
32 TEO Analog output Tracking error monitor output
33 TEZISLV Analog output TE Slicing Level
Analog Servo Interface (6)
No. Name Alt. I/O Function246 RFVDD3 Power Analog Power
247 RFRPDC Analog output RF ripple detect output
248 RFRPAC Analog Input RF ripple detect input(through AC-coupling)
249 HRFZC Analog Input High frequency RF ripple zero crossing
250 CRTPLP Analog output Defect level filter capacitor connecting
251 RFGND Ground Analog Ground
No. Name Alt. I/O Function235 JITFO Analog output The output terminal of RF jitter meter.
236 JITFN Analog Input The input terminal of RF jitter meter.
237 PLLVSS Ground Ground pin for data PLL and related analog circuitry.
238 IDACEXLP Analog output Data PLL DAC Low-pass filter
239 PLLVDD3 Power Power pin for data PLL and related analog circuitry.
240 LPFON Analog output The negative output of loop filter amplifier
241 LPFIP Analog Input The positive input terminal of loop filter amplifier.
242 LPFIN Analog Input The negative input terminal of loop filter amplifier.
243 LPFOP Analog output The positive output of loop filter amplifier
No. Name Alt. I/O Function34 OP_OUT Analog output Op amp output.
35 OP_INN Analog input Op amp negative input
36 OP_INP Analog input Op amp positive input
37 DMO Analog output Disk motor control output. PWM output.
38 FMO Analog output Feed motor control. PWM output.
39 TROPENPWM Analog output Tray PWM output / Tray open output.
40 PWMOUT1 V_ADIN9 Analog output 1st General PWM output, or Version AD input 9
41 TRO Analog output Tracking servo output. PDM output of tracking servo compensator.
42 FOO Analog output Focus servo output. PDM output of focus servo compensator
50 FG (Digital pin) V_ADIN8
LVTTL 3.3V Input, Schmitt Input, pull up , with analog input path for V_ADIN8
Motor Hall sensor input, or Version AD input 8
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36094
1 2 3 4
Micro Controller and Flash Interface (48)
General Power / Ground (18)
No. Name Alt. I/O Function
55, 93, 142,160, 174, 213
DVDD18 Power 1.8V power pin for internal digital circuitry
81, 178 DVSS Ground 1.8V Ground pin for internal digital circuitry
65, 96, 118, 131, 145,
156, 170, 208DVDD3 Power 3.3V power pin for internal digital circuitry
90,148 DVSS Ground 3.3V Ground pin for internal digital circuitry
No. Name Alt. I/O Function62 HIGHA0 Inout, 2-16MA, SR, PU Microcontroller address 8
74 HIGHA1 Inout, 2-16MA, SR, PU Microcontroller address 9
73 HIGHA2 Inout, 2-16MA, SR, PU Microcontroller address 10
72 HIGHA3 Inout, 2-16MA, SR, PU Microcontroller address 11
71 HIGHA4 Inout, 2-16MA, SR, PU Microcontroller address 12
70 HIGHA5 Inout, 2-16MA, SR, PU Microcontroller address 13
69 HIGHA6 Inout, 2-16MA, SR, PU Microcontroller address 14
68 HIGHA7 Inout, 2-16MA, SR, PU Microcontroller address 15
89 AD7 Inout, 2-16MA, SR Microcontroller address/data 7
86 AD6 Inout, 2-16MA, SR Microcontroller address/data 6
85 AD5 Inout, 2-16MA, SR Microcontroller address/data 5
84 AD4 Inout, 2-16MA, SR Microcontroller address/data 4
83 AD3 Inout, 2-16MA, SR Microcontroller address/data 3
82 AD2 Inout, 2-16MA, SR Microcontroller address/data 2
80 AD1 Inout, 2-16MA, SR Microcontroller address/data 1
79 AD0 Inout, 2-16MA, SR Microcontroller address/data 0
92 IOA0 Inout, 2-16MA, SR, PU Microcontroller address 0 / IO
77 IOA1 Inout, 2-16MA, SR, PU Microcontroller address 1 / IO
56 IOA2 Inout, 2-16MA, SR, PU Microcontroller address 2 / IO
57 IOA3 Inout, 2-16MA, SR, PU Microcontroller address 3 / IO
58 IOA4 Inout, 2-16MA, SR, PU Microcontroller address 4 / IO
59 IOA5 Inout, 2-16MA, SR, PU Microcontroller address 5 / IO
60 IOA6 Inout, 2-16MA, SR, PU Microcontroller address 6 / IO
61 IOA7 Inout, 2-16MA, SR, PU Microcontroller address 7 / IO
67 A16 Output, 2-16MA, SR Flash address 16
91 A17 Output, 2-16MA, SR Flash address 17
63 IOA18 Inout, 2-16MA, SR, SMT Flash address 18 / IO
64 IOA19 Inout, 2-16MA, SR, SMT Flash address 19 / IO
75 IOA20 Inout, 2-16MA, SR, SMT Flash address 20 / IO
88 ALEInout, 2-16MA, SR, PU, SMT Microcontroller address latch enable
76 IOCS#Inout, 2-16MA, SR PU,SMT Flash chip select, active low / IO
66 IOWR# Inout, 2-16MA, SR, SMT Flash write enable, active low / IO
78 IOOE# Inout, 2-16MA, SR, SMT Flash output enable, active low / IO
87 IOA21Inout, 2-16MA,SR SMT
Flash address 21 / IOWhile External FLASH size <= 2MB:GPIO
1 2 3 4
C
D
F
A
B
E
95
5 6 7 8
No. Name Alt. I/O Function
94 UWR# Inout, 2-16MA,SR, PU, SMT
Inout, 2-16MA,SR, PU, SMT
Microcontroller write strobe, active low
95 URD# Microcontroller read strobe, active low
97 UP1_2 Inout, 4MA, SR, PU, SMT Microcontroller port 1-2
98 UP1_3 Inout, 4MA, SR, PU, SMT Microcontroller port 1-3
99 UP1_4 Inout, 4MA, SR, PU, SMT Microcontroller port 1-4
100 UP1_5 Inout, 4MA, SR, PU, SMT Microcontroller port 1-5
101 UP1_6 SCL Inout, 4MA, SR, PU, SMTMicrocontroller port 1-6I2C clock pin
102 UP1_7 SDA Inout, 4MA, SR, PU, SMTMicrocontroller port 1-7I2C data pin
103 UP3_0 RXD Inout, 4MA, SR, PU, SMTMicrocontroller port 3-08032 RS232 RXD
104 UP3_1 TXD Inout, 4MA, SR, PU, SMTMicrocontroller port 3-18032 RS232 TXD
105 UP3_4RXD SCL Inout, 4MA, SR, PU, SMT
Microcontroller port 3-4Hardwired RD232 RXDI2C clock pin
106 UP3_5TXDSDA Inout, 4MA, SR, PU, SMT
Microcontroller port 3-5Hardwired RD232 TXDI2C data pin
109 IR Input, SMT IR control signal input
110 INT0#Inout, 2-16MA,SR, PU, SMT Microcontroller external interrupt 0, active low
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36096
1 2 3 4
Audio Interface (28)
No. Name Alt. I/O Function
204 SPMCLK SCLK0InoutNon-pull
Audio DAC master clock of SPDIF inputWhile SPDIF input is not used:Serial interface port 0 clock pinGPIO
205 SPDATA SDIN0InoutNon-pull
Audio data of SPDIF inputWhile SPDIF input is not used:Serial interface port 0 data-inGPIO
206 SPLRCK SDO0InoutNon-pull
Audio left/right channel clock of SPDIF inputWhile SPDIF input is not used:Serial interface port 0 data-outGPIO
207 SPBCK SDCS0InoutNon-pull
Audio bit clock of SPDIF inputWhile SPDIF input is not used:Serial interface port 0 chip selectGPIO
209 ALRCKInout4MA, PD, SMT
Audio left/right channel clockTrap value in power-on reset: 1 : use external 373 0: use internal 373
210 ABCK Fs64Output4MA, Non-pull
Audio bit clockPhase de-modulation
211 ACLK Inout, 4MA,Non-pull
Audio DAC master clock
197 ASDATA0Inout, 4MA,PD SMT
Audio serial data 0 (Front-Left/Front-Right)Trap value in power-on reset : 1 : manufactory test mode 0 : normal operationWhile using external channels:GPO_2
202 ASDATA1 Inout, 4MA,PD SMT
Audio serial data 1 (Left-Surround/Right-Surround)Trap value in power-on reset : 1 : manufactory test mode 0 : normal operationWhile using external channels:GPO_1
203 ASDATA2 Inout, 4MA,PD SMT
Audio serial data 2 (Center/LFE)Trap value in power-on reset : 1 : manufactory test mode 0 : normal operationWhile using external channels:GPO_0
212 ASDATA3Inout, 4MA,PD SMT
Audio serial data 3 (Center-back/ Center-left-back/Center-right-back, in 6.1 or 7.1 mode) Trap value in power-on reset : 1 : manufactory test mode 0 : normal operationWhile only 2 channels output:GPIO
214 ASDATA4 INT1#Inout, 4MA,PD SMT
Audio serial data 4 (Down-mixed Left/Right)Trap value in power-on reset : 1 : manufactory test mode 0 : normal operationWhile only 2 channels output:Microcontroller external interrupt 1GPIO
215 MC_DATA INT2#InoutPD SMT
Microphone serial inputWhile not support Microphone:Microcontroller external interrupt 2GPIO
216 SPDIFOutput, 2-16MA,SR : ON/OFFNon-pull
SPDIF output
217 APLLVDD3 Power 3.3V Power pin for audio clock circuitry
218 APLLCAP Analog Inout APLL External Capacitance connection
1 2 3 4
C
D
F
A
B
E
97
5 6 7 8
Video Interface (18)
No. Name Alt. I/O Function219 APLLVSS Ground Ground pin for audio clock circuitry
220 ADACVSS2 Ground Ground pin for AUDIO DAC circuitry
221 ADACVSS1 Ground Ground pin for AUDIO DAC circuitry
222 ARF GPIO OutputAUDIO DAC Sub-woofer channel outputWhile internal AUDIO DAC not used:GPIO
223 ARS Output
AUDIO DAC Right Surround channel outputWhile internal AUDIO DAC not used:SDATA3GPIO
224 AR Output
AUDIO DAC Right channel outputWhile internal AUDIO DAC not used:SDATA1GPIO
GPIO
GPIO
225 AVCM Analog AUDIO DAC reference voltage
226 AL GPIO Output
AUDIO DAC Left Surround channel outputWhile internal AUDIO DAC not used:SDATA2GPIO
227 ALS GPIO Output
AUDIO DAC Left Surround channel outputWhile internal AUDIO DAC not used:SDATA0 GPIO
228 ALF GPIO
CIN
OutputAUDIO DAC Center channel outputWhile internal AUDIO DAC not used: GPIO
229 ADACVDD1 Power 3.3V power pin for AUDIO DAC circuitry
230 ADACVDD2 Power 3.3V power pin for AUDIO DAC circuitry
Video Interface (18)
No. Name Alt. I/O Function196 DACVDDC
195 VREF
194 FS
Power 3.3V power pin for VIDEO DAC circuitry
193 YUV0Output4MA, SR
Video data output bit 0Compensation capacitor
Y191 YUV1Output4MA, SR
Video data output bit 1Analog Y output
C189 YUV2Output4MA, SR
Video data output bit 2Analog chroma output
CVBS187 YUV3Output4MA, SR
Video data output bit 3Analog composite output
Y/G185 YUV4Output4MA, SR
Video data output bit 4Green or Y
B/Cb/Pb183 YUV5Output4MA, SR
Video data output bit 5Blue or CB
R/Cr/Pr182 YUV6Output4MA, SR
Video data output bit 6Red or CR
V_ADIN1181 YSYN
Inout4MA,SRSMTNon-pull
Vertical sync input/outputWhile no External TV-encoder:Vertical sync for video-inputVersion AD input port 1GPIO
Analog Full scale adjustment
Analog Bandgap reference voltage
192 DACVSSC Ground Ground pin for VIDEO DAC circuitry
190 DACVDDB Power 3.3V power pin for VIDEO DAC circuitry
188 DACVSSB Ground Ground pin for VIDEO DAC circuitry
186 DACVDDA Power 3.3V power pin for VIDEO DAC circuitry
184 DACVSSA Ground Ground pin for VIDEO DAC circuitry
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV36098
1 2 3 4
DRAM Interface (63)(sorted by position)
No. Name Alt. I/O Function
179 HSYN
INT3#
GPIO_5
INT4#V_ADIN2
180 YUV7
Inout4MA,SRSMTNon-pull
Inout4MA,SRSMTNon-pull
Video data output bit 7While no External TV-encoder.Microcontroller external interrupt3GPIO
Horizontal sync input/outputWhile no External TV-encoder.Horizontal sync for video-inputMicrocontroller external interrupt4Version AD input port2GPIO
MISC (12)
No. Name Alt. I/O Function46 USB_VSS USB Ground USB ground pin
47 USBP Analog inout USB port DPLUS analog pin
48 USBM Analog inout USB port DMINUS analog pin
49 USB_VDD3 USB Power USB Power pin 3.3V
108 PRST#InputPU,SMT Power on reset input, active low.
107 ICEInoutPD,SMT Microcontroller ICE mode enable
201 GPIO_3InoutPull-Down GPIO
200 GPIO_4InoutPull-Down GPIO
199 RCLKBInoutPull-Up GPIO
GPIO_6
IO_0(RD16)
198 RVREFInoutPull-Up GPIO
233 XTALO Output 27M crystal out
234 XTALI Inout 27M crystal in
Dram Interface (58)(Sorted by position)
No. Name Alt. I/O Function
176 C_0InoutNon-pull
Digital Video output C bit 0GPIO
IO_1(RD17)175 C_1
InoutNon-pull
Digital Video output C bit 1GPIO
IO_2(RD18)173 C_2
InoutNon-pull
Digital Video output C bit 2GPIO
IO_3(RD19)172 C_3
InoutNon-pull
Digital Video output C bit 3GPIO
IO_4(RD20)171 C_4
InoutNon-pull
Digital Video output C bit 4GPIO
IO_5(RD21)
InoutNon-pull
Digital Video output C bit 5GPIO169 C_5
IO_6(RD22)
InoutNon-pull
Digital Video output C bit 6GPIO168 C_6
IO_7(RD23)
InoutNon-pull
Digital Video output C bit 7GPIO167 C_7
(DQM2)InoutPull-Up GPIO177 IO_17
1 2 3 4
C
D
F
A
B
E
99
5 6 7 8
No. Name Alt. I/O Function
165 Y_0
166 YUVCLKInoutPull-Up
Digital Video output ClockGPIO
IO_8(DQM3)
InoutNon-Pull
Digital Video output Y bit 0GPIO
IO_9(PD24)
164 Y_1InoutNon-Pull
Digital Video output Y bit 1GPIO
IO_10(PD25)
163 Y_2InoutNon-Pull
Digital Video output Y bit 2GPIO
IO_11(PD26)
162 Y_3InoutNon-Pull
Digital Video output Y bit 3GPIO
IO_12(PD27)
161 Y_4InoutNon-Pull
Digital Video output Y bit 4GPIO
IO_13(PD28)
159 Y_5InoutNon-Pull
Digital Video output Y bit 5GPIO
IO_14(PD29)
158 Y_6InoutNon-Pull
Digital Video output Y bit 6GPIO
IO_15(PD30)
157 Y_7InoutNon-Pull
Digital Video output Y bit 7GPIO
149 RA11InoutPull-Down DRAM address bit 11
130 IO_18InoutNon-pull GPIO
IO_16(PD31)
(DQS1)
155 RA4 Inout DRAM address 4
154 RA5 Inout DRAM address 5
153 RA6 Inout DRAM address 6
152 RA7 Inout DRAM address 7
151 RA8 Inout DRAM address 8
150 RA9 Inout DRAM address 9
147 CKE output DRAM clock enable
146 RCLK Inout Dram clock
144 RA3 Inout DRAM address 3
143 RA2 Inout DRAM address 2
141 RA1 Inout DRAM address 1
140 RA0 Inout DRAM address 0
139 RA10 Inout DRAM address 10
138 BA1 Inout DRAM bank address 1
137 BA0 Inout DRAM bank address 0
136 RCS# output DRAM chip select, active low
135 RAS# output DRAM row address strobe, active low
134 CAS# output DRAM column address strobe, active low
133 RWE# output DRAM Write enable, active low
132 DQM1 Input Data mask 1
129 RD8 Inout DRAM data 8
128 RD9 Inout DRAM data 9
127 RD10 Inout DRAM data 10
126 RD11 Inout DRAM data 11
125 RD12 Inout DRAM data 12
124 RD13 Inout DRAM data 13
123 RD14 Inout DRAM data 14
122 RD15 Inout DRAM data 15
121 RD0 Inout DRAM data 0
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV360100
1 2 3 4
No. Name Alt. I/O Function
112 IO_19InoutNon-Pull GPIO(DQS0)
V_ADIN4
V_ADIN5
120 RD1 Inout DRAM data 1
119 RD2 Inout DRAM data 2
117 RD3 Inout DRAM data 3
116 RD4 Inout DRAM data 4
115 RD5 Inout DRAM data 5
114 RD6 Inout DRAM data 6
113 RD7 Inout DRAM data 7
111 DQM0 Inout Data mask 0
JTAG Interface (4)
No. Name Alt. I/O Function
51 TDIInoutNon-Pull
InoutNon-Pull
Serial interface port 3 data-outVersion AD input port 4GPIO
Serial interface port 3 data-inVersion AD input port 5GPIO
52 TMS
V_ADIN6InoutNon-Pull
Serial interface port 3 clock pinVersion AD input port 6GPIO
53 TCK
V_ADIN7InoutNon-Pull
Serial interface port 3 chip-selectVersion AD input port 7GPO
54 TDO
1 2 3 4
C
D
F
A
B
E
101
5 6 7 8
AINR 1 CKS016
AINL 2 CKS215
CKS1 3 DIF14
VCOM 4 PDN13
AGND 5 SCLK12
VA 6 MCLK11
VD 7 LRCK10
DGND 8 SDTO9
No. Pin Name I/O Pin Function1 AINR I R ch analog input
2 AINL I L ch analog input
3 CKS1 I Mode select 1
4 VCOM O Common voltage output, VA/2 bias voltage of ADC input
5 AGND − Analog Ground
6 VA − Analog power supply, 4.5-5.5V
7 VD − Digital power supply, 2.7-5.5V
8 DGND − Digital ground
9 SDTO O Audio serial data output "L" output at power-down mode.
10 LRCK I/O Output channel clock "L" output in master mode at power-down mode.
11 MCLK I Master clock input
12 SCLK I/O Audio serial data clock "L" output in master mode at power-down mode.
13 PDN I Power down mode "H": Power up, "L": Power down
14 DIF I Audio interface format "H": 24bit I2S compatible, "L": 24bit MSB justified
15 CKS2 I Mode select 2
16 CKS0 I Mode select 0
AK5358ET (DVDMAIN ASSY : IC3003)• 96kHz 24-Bit ∆∑ ADC
Pin Arrangement (Top view)
Pin Function
AINL LRCKSCLK
SDTO
DIF
∆∑Modulator
DecimationFilter2
AINR∆∑
ModulatorDecimation
Filter
Serial I/OInterface
1
VD
VCOMVoltage
Reference
Clock Driver
4
7AGND
5VA6
CKS215
CKS13
CKS016
PDN13
MCLK11
DGND8
10
12
9
14
Block Diagram
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV360102
1 2 3 4
8. PANEL FACILITIES
Front panel
1 OPEN/CLOSEOpens/closes the disc tray.
2 DVD/CDSelects the DVD/CD function and starts/pauses/resumes playback.
3
Stops playback.
4 USBSelects the USB function and starts/pauses playback.
5 VOLUME buttons
6 STANDBY/ONSwitches the system on or into standby.
7 USB interfaceConnect a USB device for playback (see USB playback ).
8 PHONES jackConnect headphones.
9 DisplaySee Display below.
Remote control
1 STANDBY/ON Switches the system on or into standby.
2 Function select buttonsSelects the source you want to listen to (DVD/CD, TUNER, USB, LINE).
3 Number buttons / CLEAR / DISPLAY
CLEARClears an entry.
DVD/CD VOLUMEOPEN/CLOSE USB STANDBY/ON
3 4 5 621
7 8
9
TV CONTROL
VOLUME
HOMEMENU
AUDIO
SUBTITLE
ANGLE
ZOOM
STANDBY/ON
MUTE
LINE
TOP MENU
RETURN
TEST TONE SOUND
CLEAR
SLEEP
DISPLAY
1 3
4 6
7
2
5
8 9
0
SURROUND
TUNE
TUNE
STST ENTER
USB
SETUP
MENU
OPEN/CLOSE
INPUT VOLUMECHANNEL
DVD/CDTUNER
(FM/AM)
1
2
3
8
9
4
7
11
12
13
14
15
16
5
6
10
DISPLAYDisplays/changes disc information shown on-screen.
1 2 3 4
C
D
F
A
B
E
103
5 6 7 8
4 TOP MENUDisplays the top menu of a DVD disc in the play position—this may be the same as pressing MENU.
5 Cursor buttons, ENTER and tuning buttons
Cursor buttonsUse the cursor buttons (///) to navigate on-screen displays and menus.
ENTERSelects an option or executes a command.
TUNE +/-Tunes the radio.
ST +/-Selects station presets when listening to the radio.
6 HOME MENUDisplays (or exits) the on-screen menu for Initial Settings, Play Mode functions, etc.
7 Setup and other sound controls
SETUPUse to make various system and surround sound settings.
TEST TONEOutputs the test tone (for speaker setup).
SURROUNDSelects a Surround mode or switches to stereo playback .
SOUNDAccesses the sound menu to adjust the SFC Mode, bass and treble, etc.
8 Playback controlsSee Basic playback controls , Disc playback features and USB playback for an explanation of these controls.
9 TV CONTROL buttonsThese control Pioneer plasma displays.
10 MUTEMutes the sound (press again to cancel).
11 OPEN/CLOSEOpens/closes the disc tray.
12 DVD controls
AUDIOSelects audio channel / language.
SUBTITLEDisplays/changes the subtitles.
ANGLEChanges camera angle during DVD multi-angle scene playback.
ZOOMChanges the screen zoom level.
13 MENUPress to display a DVD disc or USB menu, or the Navigator.
14 RETURNReturns to a previous menu screen.
15 SLEEPPress to set the sleep timer.
16 VOLUME +/-Adjusts the volume.
Display
1 DTSLights during playback of a DTS source.2 PRGSVELights when progressive scan video output is selected.3 SOUNDLights when the SFC Modes or the tone controls (treble, bass or bass boost) are active.4 F.SURR.Lights when the Front Surround listening mode is selected.5 RPT and RPT-1 RPT lights during repeat play. RPT-1 lights during repeat one-track play.6 PGMLights during program play.7 Tuner indicators
- Lights when a broadcast is being received.
- Lights when a stereo FM broadcast is being received in auto stereo mode.
- Lights when FM mono reception is selected.
8 RDM Lights during random play.9 kHz / MHzIndicates the frequency unit shown in the character display (kHz for AM, MHz for FM).
10 Character display
11Lights when sleep timer is active.12Lights during playback.13 2 PL II Lights during Dolby Pro Logic II decoding.14 2 DLights during playback of a Dolby Digital source.
PRGSVE SOUNDDTS F.SURR.
2PL2D
RPT - 1kHz PGMMHz RDM
6
12 89 7
5
1113
3
14 10
21 4
XV-DV3605 6 7 8
C
D
F
A
B
E
XV-DV360104
1 2 3 4
Service Remote Control Unit GGF1381DVD Test Disc (DVD-Video) GGV1025
adjustment, diagnosisName Jig No. Remarks
Check of DVD-VideoCD Test Disc STD-905 Check of CDDVD Data Disc GGV1269 ID data setting
7 Jigs list
Lubricating Oil GYA1001
GEM1036Daifree
Name Lubricants and Glues No. Remarks
refer to "2.3 06 LOADER ASSY"
refer to "2.3 06 LOADER ASSY"
GEM1037Silicone Adhesive refer to "2.4 TRAVERSE MECHANISM ASSY-S"
7 Lubricants and Glues list
Speaker Cable with terminal SDS1174 (FL/WHITE)SDS1175 (FR/RED), SDS1176 (SL/BLUE)SDS1177 (SR/GRAY), SDS1178 (C/GREEN)
For checking audio at the SP terminal
GYL1001Screw tight refer to "6.5 MECHANISM ADJUSTMENT"
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:
Position to be cleaned Cleaning tools
Pickup leneses Cleaning liquid : GEM1004Cleaning paper : GED-008
7 CLEANING
1 2 3 4