pipe outside diameter guide - salina supply … · june 7, 2018 q-1 pipe outside diameter guide -...

June 7, 2018 Q-1

PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES

NOMINAL PIPE SIZES 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2"

COPPER TUBING .63 .88 1.13 1.38 1.63 2.13 2.63

STEEL & PLASTIC PIPE .84 1.05 1.32 1.66 1.90 2.38 2.88

PIPE OUTSIDE DIAMETER GUIDE - STANDARD PRESSURE PIPE SIZES

NOMINAL PIPE SIZES 3" 4" 5" 6" 8" 10" 12" 14" 15" 16" 18" 20" 24" 30"

COPPER TUBING 3.13 4.13 5.13 6.13

STEEL & PLASTIC (SDR 26.21 & SCHD) 3.50 4.50 5.56 6.63 8.63 10.75 12.75 14.00 16.00 18.00 20.00 24.00 30.00

PLASTIC IRRIGATION PIPE (PIP) 4.13 6.14 8.16 10.20 12.24 15.30 18.70 22.05 24.80

PLASTIC SEWER PIPE (SDR 35) 4.22 6.28 8.40 10.50 12.50 15.30 18.70 24.80

PLASTIC (PVC) AWWA C-900/C-909 4.80 6.90 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80

POLYETHYLENE PIPE (IPS SIZE) 3.50 4.50 6.63 8.63 10.75 12.75 14.00 16.00 18.00 20.00 24.00 30.00

POLYETHYLENE PIPE (DIP SIZE) 4.80 6.90 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80 32.00

DUCTILE IRON PIPE 3.96 4.80 6.90 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80 32.00

CAST IRON PIPE

CLASS 100 - 250 AWWA 3.96 4.80 6.90 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80 32.00

CLASS A - AWWA PIT CAST 3.80 4.80 6.90 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80 31.74

CLASS B - AWWA PIT CAST 3.96 5.00 7.10 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80 32.00

CLASS C THRU D - AWWA PIT CAST 3.96 5.00 7.10 9.30 11.40 13.50 15.65 17.80 19.92 22.06 26.32

ABESTOS CEMENT PIPE - CLASS 100

MACHINED END 3.74 4.64 6.91 9.11 11.24* 13.44* 15.07 17.15 19.90 22.12 26.48 33.12

FLIN-TITE ROUGH BARREL 3.94 4.90 7.13 9.33 11.30 13.42 15.45 17.60

FLUID-TITE ROUGH BARREL 3.93 5.05 7.16 9.32 11.46 13.70 15.36 17.50 20.44 22.50 27.17

PERMAFLEX ROUGH BARREL 4.84 7.15 9.35 11.47 13.74 15.55 17.55 20.50 22.70 27.15

RING-TITE ROUGH BARREL 3.95 4.92 7.19 9.39 11.47 13.74 15.51 17.65 20.44 22.68 27.12 33.80

MINIMUM STANDARD ROUGH BARREL 4.79 7.05 9.22 11.25 13.37 15.36 17.50

MAXIMUM STANDARD ROUGH BARREL 5.26 7.40 9.57 11.77 14.04 15.80 17.94


MACHINED END 3.84 4.81 6.91 9.11 11.66 13.92 16.22 18.46 20.94 23.28 27.96 35.00


FLUID-TITE ROUGH BARREL 4.03 5.14 7.12 9.32 11.85 14.11 16.41 18.65 21.20 23.54 28.22






MACHINED END 3.84 4.81 6.91 9.11 11.66 13.92 16.22 18.46 22.18 24.66 29.62 37.06


FLUID-TITE ROUGH BARREL 4.18 5.32 7.36 9.46 11.88 14.11 16.44 18.74





*FLIN-TITE ME IS 10.89 FOR 10" & 12.99 FOR 12" SIZES

THIS O.D. GUIDE IS FOR YOUR CONVENIENCE & IS BASED ON THE LATEST PIPE STANDARDS & INFORMATION SUPPLIED

BY MANUFACTURERS. DUE TO OCCASIONAL CHANGES & VARIANCES IN OUTSIDE DIAMETERS, THE PIPE O.D. SHOULD

ALWAYS BE VERIFIED BEFORE ORDERING FITTINGS.

WATERWORKS Q

PIPE OUTSIDE DIAMETER GUIDE

1/4 BENDMJ X MJ

SSC No. Manuf No. Size Price Each

56A 1010 5-600 2" $ 59.73 *

56A 1040 5-600 4" 66.45 *56A 1030 5-600 3" 61.23 *

56A 1060 5-600 6" 108.27 *56A 1070 5-600 8" 157.54 *

56A 1080 5-600 10" $ 250.13 *56A 1090 5-600 12" 336.74 *

Q-2 June 7, 2018

BELL-TITE DUCTILE IRON PRESSURE WATER MAINCENTRIFUGALLY CAST IN METAL MOLDS • AVAILABLE IN 3" TO 24" DIA. • STOCKED IN 4" TO 12" DIA.

SSC No. Pipe Class Nominal Size Ductile Iron Wgt Lbs/Ft Pipe Length Price Each

56A 0350 CLASS 51 4" 4.80 OD 15.44 20' $ 588.35

56A 0366 CLASS 50 8" 9.05 27.20 20' 661.43

56A 0368 CLASS 50 10" 11.10 35.80 20' $ 783.9756A 0369 CLASS 50 12" 13.20 45.30 20' 988.93

56A 0363 CLASS 50 6" 6.90 19.50 20' $ 473.82

WATERWORKS Qcontinued on next page

WATER MAIN

NOMINAL OLD STYLE PIPE SIZE CAST IRON 4" 5.00 OD 6" 7.10 8" 9.30 10" 11.40 12" 13.50

C-900 PVC WATER MAIN AWWA C 900 STANDARD FOR PVC PRESSURE PIPE FOR WATERCLASS 150 (DR-18) & CLASS 200 (DR-14) RING-TITE JOINTS • STOCKED IN SIZES 4" TO 8" DIAMETER

SSC No. Pipe Class Pipe Size O.D. Min. Wall Lbs/Ft Pipe Length Price Each

56A 0490 CLASS 150 4" 4.80 .267 2.48 20' $ 87.55

56A 0510 CLASS 150 8" 9.05 .503 8.83 20' 300.96 56A 0500 CLASS 150 6" 6.90 .383 5.13 20' 173.63

CLASS 200 4" 4.80 .343 3.12 20' Call For Price

56A 0600 CLASS 200 8" 9.05 .646 11.13 20' 375.37 56A 0550 CLASS 200 6" 6.90 .493 6.47 20' $ 218.28

MECHANICAL JOINT FITTINGS COMPACT DUCTILE IRON CEMENT LINED FITTINGS ONLY

1/4 BENDMJ X P.E.


56A 1410 5-603 4" $ 79.15 *56A 1420 5-603 6" 130.67 *

1/8 BENDMJ X MJ


56A 1140 5-605 4" $ 54.51 *

56A 1160 5-605 8" 128.43 * 56A 1150 5-605 6" 88.11 *

56A 1170 5-605 10" $ 186.66 *56A 1180 5-605 12" 278.50 *

1/16 BENDMJ X MJ


56A 1240 5-609 4" $ 52.27 *

56A 1260 5-609 8" 125.44 *56A 1250 5-609 6" 80.64 *

1/32 BENDMJ X MJ


56A 1340 5-611 4" $ 50.03 *

56A 1360 5-611 8" 114.24 *56A 1350 5-611 6" 88.63 *

TEEMJ X MJ X MJ


56A 1560 5-620 2" $ 72.43 *

56A 1590 5-620 4" 87.36 *56A 1580 5-620 3" 81.39 *

56A 1610 5-620 6" 156.80 *56A 1620 5-620 8" 235.20 *

56A 1630 5-620 10" $ 336.00 *56A 1640 5-620 12" 468.90 *

*Price Change

*Price Change

For More Information On These Products Or On Products Not Listed, Call Salina Supply Company At (785) 823-2221

continued on next page

June 7, 2018 Q-2A

WATERWORKS Q

REDUCING TEEMJ X MJ X MJ


56A 1660 5-620 4" x 2" $ 130.67 *

56A 1730 5-620 8" x 4" $ 169.49 *

56A 1710 5-620 6" x 4" 145.60 *

56A 1750 5-620 8" x 6" 194.88 *

56A 1810 5-620 10" x 6" $ 250.88 *

56A 1820 5-620 12" x 4" $ 317.33 *56A 1830 5-620 12" x 6" 317.33 *56A 1850 5-620 12" x 8" 365.86 *

TAPPED TEEMJ X MJ X F.I.P.


56A 1890 5-642 4" x 2" $ 112.75 *

MECHANICAL JOINT FITTINGS COMPACT DUCTILE IRON CEMENT LINED FITTINGS ONLY

CROSSMJ X MJ X MJ X MJ


56A 1980 5-631 4" $ 186.66 *

56A 1990 5-631 6" $ 228.48 *56A 2050 5-631 6" x 4" 203.84 *

56A 2010 5-631 8" $ 249.38 *56A 2060 5-631 8" x 4" 322.56 *56A 2080 5-631 8" x 6" 236.69 *

ADAPTERFLANGE X P.E.


56A 3040 5-661 4" x 16" $ 175.68 56A 3110 5-661 6" x 16" 235.73 *

REDUCERMJ X MJ


56A 2240 5-635 4" x 2" $ 79.15 *

56A 2330 5-635 6" x 4" $ 62.72 *

56A 2270 5-635 4" x 3" 56.75 *

56A 2370 5-635 8" x 6" 91.84 *

56A 2385 5-635 10" x 6" $ 117.97 *56A 2390 5-635 10" x 8" 129.92 *

56A 2410 5-635 12" x 8" $ 159.78 *56A 2420 5-635 12" x 10" 176.96 *

REDUCERSEB


56A 2440 5-636 4" x 2" $ 129.17 *

56A 2540 5-636 6" x 4" $ 64.96 *

56A 2470 5-636 4" x 3" 52.27 *

56A 2570 5-636 8" x 4" $ 109.01 *56A 2580 5-636 8" x 6" 99.31 *

REDUCERLEB


56A 2610 5-637 4" x 2" $ 107.34 *

56A 2650 5-637 8" x 6" 90.35 *56A 2620 5-637 6" x 4" 99.31 *

REDUCERP.E. X P.E.


56A 2760 5-638 6" x 4" $ 76.16 *56A 2770 5-638 8" x 6" 120.21 *

SHORT SOLID SLEEVESMJ X MJ

SSC No. Manuf No. Size Length Price Each

56A 3160 5-644S 2" 71/2" $ 53.76 *

56A 3270 5-644S 4" 71/2" 41.07 *56A 3210 5-644S 3" 71/2" 44.05 *

56A 3310 5-644S 6" 71/2" 73.92 *56A 3340 5-644S 8" 71/2" 95.57 *

56A 3370 5-644S 10" 71/2" $ 173.22 *56A 3410 5-644S 12" 71/2" 194.88 *

LONG SOLID SLEEVESMJ X MJ

SSC No. Manuf No. Size Length Price Each

56A 3280 5-644L 4" 12" $ 58.99 *

56A 3350 5-644L 8" 12" 159.78 *56A 3320 5-644L 6" 12" 98.56 *

56A 3380 5-644L 10" 12" $ 190.40 *56A 3430 5-644L 12" 12" 256.85 *

*Price Change

BOLT SIZES FOR MECHANICAL JOINT FITTINGSSIZE OF FITTING 3" 4" 6" 8" 10" 12"

BOLT SIZE 5/8" x 3" 3/4" x 3" 3/4" x 31/2"

Q-2B June 7, 2018

WATERWORKS Q

MECHANICAL JOINT FITTINGS COMPACTDUCTILEIRONCEMENTLINEDFITTINGSONLY•CASTIRONFLANGEDFITTINGS•MISC

SHORT RADIUS 90° ELL CAST IRON • FLANGED

SSC No. Manuf No. Size R A Price Each

56A 6495 5-700 6" 6.0 8.0 189.65 56A 6490 5-700 4" 4.5 6.5 $ 122.45

STRAIGHT TEE CAST IRON • FLANGED

SSC No. Manuf No. Size R A Price Each

56A 6505 5-720 6" 6.0 8.0 278.50 56A 6500 5-720 4" 6.5 6.5 $ 224.00

U.S. PIPE TYTON JOINT PLUG

SSC No. Size Price Each

56A 6510 4" $ 20.16

EBBA IRON RETAINER GLAND


56A 7470 4" $ 20.16 *56A 7480 6" 35.84 *56A 7490 8" 41.07 *

56A 7510 12" $ 101.55 *

HARCO TRANSITION GASKET


56A 7200 40202 2" $ 3.20 * 56A 7250 40203 3" 4.48 * 56A 7300 40204 4" 5.12 *56A 7350 40206 6" 5.76 *56A 7400 40208 8" 8.32 *

56A 7450 40210 10" $ 9.60 *

FOR STEEL PIPE WITH M.J. CONNECTIONS

*Price Change

RETAINER GLAND WITH SET SCREWS

MJ GLAND PACK ACCESSORY SET

SSC No. Manuf No. Size Bolt Size Lbs Price Each

56A 0840 2" 5/8" x 3" 5 $ 17.17 *56A 0850 3" 5/8" x 3" 7 17.17 *

56A 0860 085164 4" 3/4" x 31/2" 8 $ 22.40 *56A 0870 085171 6" 3/4" x 31/2" 12 31.36 *56A 0880 085188 8" 3/4" x 31/2" 15 34.35 *

56A 0890 085195 10" 3/4" x 4" 20 $ 50.03 *56A 0900 085201 12" 3/4" x 4" 25 52.27 *

MJ TRANSITION GLAND PACK

SSC No. Manuf No. Size Lbs Price Each

56A 0905 085423 4" 8 $ 23.89 *56A 0910 085430 6" 11 32.11 *56A 0915 085447 8" 15 36.59 *

MJ VALVE ACCESSORY SET


56A 8000 4" 8 $ 22.85 *56A 8005 6" 12 30.91 *56A 8010 8" 15 34.27 *

WITH T-HEAD BOLTS & NUTS & MJ GASKET

SBR TRANSITION GASKET & T-HEAD BOLTS & NUTS

WITH ANTI-ROTATION BOLTS & NUTS & MJ GASKET

PUSH-IN PLUG WITH EARS


56A 6410 5-176 4" $ 38.83 56A 6420 5-176 6" 62.72

SOLID PLUGMJ X MJ


56A 4010 5-654 2" $ 44.05

56A 4060 5-654 6" 58.24 56A 4050 5-654 4" 30.61

56A 4070 5-654 8" 86.61

56A 4080 5-654 10" $ 150.83 56A 4090 5-654 12" 148.59

TAPPED PLUGMJ x F.I.P.


56A 4120 5-655 2" x 2" $ 64.96 56A 4170 5-655 4" x 2" 56.75 56A 4220 5-655 6" x 2" 83.63

SOLID CAPMJ X MJ


56A 4310 5-650 2" $ 46.29

56A 4350 5-650 6" 44.05 56A 4340 5-650 4" 24.64

56A 4360 5-650 8" 72.43

TAPPED CAPMJ x F.I.P.


56A 4470 5-652 6" x 2" $ 70.93

SERIES 200-C FOR CAST IRON 125 LB CAST IRON CLASS 125 • 150 LB STEEL SERIES 200-S CLASS 150

56A 7785 120-069000-000 6" 3 C-900 PVC Pipe Up To 250 PSI 18.3 65.49 *56A 7780 120-048000-000 4" 2 C-900 PVC Pipe Up To 250 PSI 12.2 $ 52.45 *

56A 7798 120-132000-000 12" 8 C-900 PVC Pipe Up To 250 PSI 42.0 151.97 *

56A 7790 120-090500-000 8" 3 C-900 PVC Pipe Up To 250 PSI 20.8 90.13 *56A 7795 120-111000-000 10" 6 C-900 PVC Pipe Up To 250 PSI 33.4 144.17 *

CAM-LOCK JOINT RESTRAINT KIT FOR MJ FITTINGS ON C-900 PVC PIPECOLOR-CODED NUTS & WEDGES • EPOXY COATING • WIDER WEDGES & LONGER T-BOLTS • BOXED WITH WITH DUCTILE IRON GASKET, BOLTS & NUTS

SSC No. Manuf No. Size No Of Wedges Type of Pipe Working Pressure Wgt Lbs Price Each

CAM-LOCK JOINT RESTRAINT KIT FOR MJ FITTINGS ON DUCTILE IRON PIPECOLOR-CODED NUTS & WEDGES • EPOXY COATING • WIDER WEDGES & LONGER T-BOLTS • BOXED WITH WITH DUCTILE IRON GASKET, BOLTS & NUTS

SSC No. Manuf No. Size No Of Wedges Type of Pipe Working Pressure Wgt Lbs Price Each

56A 7710 111-069000-000 6" 3 Ductile Iron Pipe 350 PSI 17.8 56.44 *56A 7700 111-048000-000 4" 2 Ductile Iron Pipe 350 PSI 11.8 $ 45.84 *

56A 7740 111-132000-000 12" 8 Ductile Iron Pipe 350 PSI 40.4 138.86 *

56A 7720 111-090500-000 8" 3 Ductile Iron Pipe 350 PSI 20.3 76.86 *56A 7730 111-111000-000 10" 6 Ductile Iron Pipe 350 PSI 32.5 101.62 *

June 7, 2018 Q-3

WATERWORKS Q

SERIES 1300 RESTRAINERS FOR PVC & DUCTILE IRON PIPE


56I 6094 UFR1300-C-4 4" CIP 10 64.00 56I 6093 UFR1300-S-4 4" IPS 10 $ 68.31



ADAPTER FLANGES FOR CAST OR DUCTILE IRON

SSC No. Manuf No. Size PSI Temp Range Price Each

56A 7530 200-C 6" 250 PSI 20° to 150° F 125 Lb Cast Iron 66.59 *56A 7520 200-C 4" 250 PSI 20° to 150° F 125 Lb Cast Iron $ 61.82 *

56A 7550 200-C 10" 175 PSI 20° to 150° F 125 Lb Cast Iron $ 166.10 *

56A 7540 200-C 8" 250 PSI 20° to 150° F 125 Lb Cast Iron 92.47 *

ADAPTERS & RESTRAINTS * Price Change ** New Product

NominalPipeSize

Pipe ODSteel200-S

Pipe ODCast Iron

200-C

Dimensions BoltHoleDia

Set Screw

Qty

SetScrewSize

WgtLbsAprxA B BC

2" 2.375 2.50 6" 113/16" 43/4" 3/4" 2 1/2" x 1" 3.521/2" 2.875 7" 113/16" 51/2" 3/4" 4 1/2" x 1" 4

3" 3.500 3.96 71/2" 113/16" 6" 3/4" 4 1/2" x 1" 54" 4.500 4.80 9" 17/8" 71/2" 3/4" 4 1/2" x 1" 7.75" 5.563 10" 17/8" 81/2" 7/8" 8 1/2" x 1" 8.76" 6.625 6.90 11" 17/8" 91/2" 7/8" 8 1/2" x 1" 108" 8.625 9.05 131/2" 21/4" 111/2" 7/8" 8 5/8" x 11/4" 16.510" 10.750 11.10 16" 21/4" 141/4" 1" 12 5/8" x 11/4" 2212" 12.750 13.20 19" 21/4" 17" 1" 12 5/8" x 11/4" 31


SERIES UFA900-C ADAPTERS FOR DUCTILE IRON PIPE O.D. PVC PIPE

56A 7554 UFA900-C-6 6" 150 PSI -65° to 250° F 125 Lb 114.58 **56A 7553 UFA900-C-4 4" 150 PSI -65° to 250° F 125 Lb $ 90.43 **

56A 7555 UFA900-C-8 8" 150 PSI -65° to 250° F 125 Lb 159.52 **

*Price Change

Q-4 June 7, 2018

ACCESSORIES FOR PL-2 DRILLING MACHINE

ADAPTER NIPPLES FOR PL-2 DRILLING MACHINE

SSC No. Manuf No. Product Size Price Each

ACCESSORIES FOR B-101 TAPPING MACHINE

SSC No. Manuf No. Product Size Price Each

56F 8650 504108 Gasket 3/4" $ 1.17

56F 8840 88366 Cutting Grease $ 25.66

56F 8930 681919 3/4" Shell Cutter $ 169.4656F 8933 681920 1" Shell Cutters 169.46

56F 8780 507632 For Flare Thread 3/4" 0.550" H-10893 $ 83.1956F 8810 507633 For Flare Thread 1" 0.550" H-10895 83.19

56F 8130 40021 Leather Washer $ 10.9556F 8150 40036 Rubber Gate Washer 15.77

56F 8190 58101 Packing $ 16.46

56F 8170 40066 Small Saddle Gasket $ 13.1256F 8180 40067 Large Saddle Gasket 51.64

56F 8181 48234 Heavy Fiber Gasket 3/4" $ 1.0056F 8182 48235 Heavy Fiber Gasket 1" 1.20

56F 8244 75812 Saddle 4" $ 70.3156F 8246 75815 Saddle 6" 70.3156F 8248 75817 Saddle 8" 70.3156F 8250 75821 Saddle 12" 70.31

56F 8340 680539 Drill & Tap 3/4" $ 284.9556F 8350 680540 Drill & Tap 1" 378.57

56F 8370 680600 Screw Plug 3/4" $ 238.2356F 8390 680601 Screw Plug 1" 286.4656F 8400 680648 Screw Plug 394.43

SSC No. Manuf No. Corp Stop Out. Conn. Plas.Pipe Wall Gasket Price Each

WATERWORKS Q

B-101 TAPPING MACHINE & ACCESSORIESFOR TAPPING WATER MAINS & INSERTING CORPORATION STOPS 1/2" TO 1" INCLUSIVE UNDER PRESSURE. HAND OR POWER OPERATION.

SSC No. Manuf No. Max W.P. Without Power Clevis Max W.P. With Power Clevis Wgt Lbs

B-101 90 PSI 250 PSI 113 Call For Price

COMBINED DRILL & TAPS MUELLER (CC) THREADS

PIPE TO BE TAPPED

TYPE •CastIron•Asbestos

•CementLined Ductile Iron

•CementLinedCast Iron

SIZE 3" to 24" 3" to 16" 3" to 14"CLASS 100 150 200

DRILL LENGTH Regular Regular RegularCORPORATION STOP INLET OR PLUG THREAD

3/4" 680539 680539

1" 680540 680540

B-101 B

SELECT PROPER COMBINED DRILL & TAP ACCORDING TO: 1. SIZE & TYPE OF INLET THREAD OF CORPORATION STOP TO BE INSERTED. 2. MATERIAL FROM WHICH THE PIPE TO BE TAPPED IS MADE. 3. SIZE & CLASS OF PIPE TO BE TAPPED

SSC No. Manuf No. Product Price Each

56F 8620 PL-2 Drilling Machine Drills 11/16" Or 7/8" Diameter Holes $ 287.68 *MODEL NO. 2

DRILLS 11/16" OR 7/8" DIAMETER HOLES QUICKLY & EASILY

WITH POSITIVE CONTROLLED FEED. THE REPLACEABLE

SHELL CUTTER RETAINS THE

COUPON & RARELY LEAVES CHIPS IN

THE MAIN.

PL-2 DRILLING MACHINE & ACCESSORIESFOR DRILLING PLASTIC OR FIBERGLASS COMPOSITE PIPE THROUGH COMBINED CLAMP & CORPORATION STOP OR BRASS CLAMP & CORPORATION STOP.

FURNISHED WITH EACH MACHINE:•METAL CARRYING CASE•REVERSIBLE RATCHET HANDLE•SMALL SADDLE GASKET•LARGE SADDLE GASKET•ROUND LINK CHAIN•CHAIN HOOKS/WASHERS/NUTS•OPEN END WRENCH•BOX WRENCH•BODY CLEANING CHISEL•BLOW-OFF VALVE•INSTRUCTION MANUAL•CUTTING GREASE

TAP & DRILLS WITH MUELLER

THREADS

E-Z RELEASE SCREW PLUG

WITH INSIDE THREAD


HYDRANTS & ACCESSORIES

CENTURION 2 WAY FIRE HYDRANT •COMPRESSIONTYPEMAINVALVECLOSESWITHPRESSURE•4" OR 6" D-150 INLET FITS DIP OR SAND CAST PIPE WITH PROPER GASKET •TWO21/2"NOMINALHOSENOZZLES•11/2"PENTAGONOPERATINGNUT•200PSIWORKING&400PSITESTPRESSURE•FULLY COMPLIES WITH AMERICAN WATER ASSOCIATION STANDARD C-502.

SSC No. Manuf No. Size Wgt. Lbs. Price Each

56C 0615 A-420 6" MJ 48" Bury 41/2" Nom Main Valve Opening 457 2,677.43 *56C 0603 A-420 4" MJ 48" Bury 41/2" Nom Main Valve Opening 457 $ 2,667.90 *

56C 0670 A-423 6" MJ 48" Bury 51/2" Nom Main Valve Opening 524 $ 3,118.19 *56C 0800 A-423 Yellow 6" Flg 5' Bury 51/2" Nom Main Valve Opening 531 3,416.71 *

June 7, 2018 Q-5*Price Change

WATERWORKS Q


56C 1490 77 48" Bury 2" Fip Side Inlet 57 $ 998.36 *

MAINGUARD POST FLUSH HYDRANT•LOCKINGCOVER•IRONNOZZLECAP•TRAFFICBREAKAWAY•NOSPECIALOPERATINGWRENCHREQUIRED

CENTURION 3 WAY FIRE HYDRANT •COMPRESSIONTYPEMAINVALVECLOSESWITHPRESSURE•6" D-150 INLET FITS DIP OR SAND CAST PIPE WITH PROPER GASKET•ONE41/2"NOMINALPUMPERNOZZLE•TWO21/2"NOMINALHOSENOZZLES•11/2" PENTAGON OPERATING NUT •200PSIWORKING&400PSITESTPRESSURE•FULLY COMPLIES WITH AMERICAN WATER ASSOCIATION STANDARD C-502.


56C 1760 280354 10.5 Oz. -60° TO 150° F Water-White, Low-Odor Fluid $ 31.19 *56C 1763 184048 1 Gal. -60° TO 150° F Water-White, Low-Odor Fluid 79.22 *

ALL WEATHER HYDRANT LUBRICATING OILDEVELOPED TO MEET THE SPECIAL NEEDS OF HYDRANT LUBRICATION AT ALL TEMPERATURES & SEVERE CONDITIONS. ENSURES EFFICIENT, TROUBLE-FREE HYDRANT OPERATION.

SSC No. Manuf No. Size Flow Range Price Each

SSC No. Manuf No. Price Each

56C 1830 A-367 $ 65.43 *

BRASS SLEEVEPROTECTS O RINGS FROM DAMAGE BY STEM THREADS WHEN REMOVING HOUSING FROM THE UPPER STEM


56C 1820 A-311/A-2409 $ 52.25 *

OPERATING WRENCHOPERATES PIN & LUG TYPE HOSE COUPLINGS, NOZZLE CAPS, HYDRANT OPERATING NUT & HOLD DOWN NUT

SSC No. Manuf No. Wgt. Price Each

56K 3600 P-66602 Lies Flat On Largest Cap Nuts & Operating Nuts 4.5 Lbs $ 20.80 *

POLLARD ADJUSTABLE WRENCH & SPANNERFITS PENTAGON NUTS, & CAPS UP TO 13/4", SQUARES UP TO 11/4", & PIN OR ROCKER LUG HOSE COUPLINGS WITH ITSDOUBLE SPANNER DESIGN. UNBREAKABLE FORGED HEAD. HEAVY DUTY THREAD SPOOL & KNURLED HANDLE.



Q-5A June 7, 2018

WATERWORKS Q

HYDRANT ACCESSORIES

SAFETY FLANGE REPAIR KITSSTEEL SAFETY STEM COUPLING, SS CLEVIS & COTTER PINS, SAFETY FLANGE & GASKET, 3 BOLTS WITH NUTS & 1 CAN OF HYDRANT LUBRICATING OIL.

SSC No. Manuf No. Hyrant Size Wgt. Price Each

56C 1680 A-301 51/4" 14 Lbs 284.15 *56C 1660 A-300 41/4" & 41/2" 12 Lbs $ 284.15 *

56C 2681 A-280360 41/2" HYDRANT BONNET REPAIR KIT $ 104.80 *

HYDRANT EXTENSION SECTIONSEXTENSION BARREL, STEEL STEM COUPLING, 8 BOLTS & NUTS, SS CLEVIS & COTTER PINS, SOLID FLANGE & GASKET & CAN OF HYDRANT LUBRICATING OIL.

SSC No. Manuf No. Hyrant Size Extension Wgt. Price Each

56C 2260 A-319 41/4" & 41/2" 12" 87 Lbs 756.32 *56C 2230 A-319 41/4" & 41/2" 6" 50 Lbs $ 650.34 *

56C 2310 A-319 41/4" & 41/2" 18" 99 Lbs 819.39 *56C 2314 A-319 41/4" & 41/2" 24" 111 Lbs 914.29 *

56C 2505 A-320 51/4" 6" 66 Lbs $ 715.28 *56C 2510 A-320 51/4" 12" 87 Lbs 841.62 *56C 2560 A-320 51/4" 18" 105 Lbs 953.09 *56C 2610 A-320 51/4" 24" 128 Lbs 1,072.55 *

56C 1800 A-15 41/2" PUMPER NOZZLE CAP GASKET $ 19.85 *

56C 1810 A-19 NS HOSE NOZZLE GASKET 21/2" 6.57 *56C 1685 H95-H75-H94 BRASS COUPLING SUB ASSEMBLY $ 250.27 *

56C 2629 142811 DRAIN VALVE FACING 6.03 *

56C 2645 184466 OLD STYLE STEM ASSEMBLY 6" $ 275.05 *56C 2648 184467 OLD STYLE STEM ASSEMBLY 12" 287.22 *56C 2650 184468 OLD STYLE STEM ASSEMBLY 18" 299.75 *56C 2655 184469 OLD STYLE STEM ASSEMBLY 24" 312.27 *

56C 2663 190435 MAIN VALVE & GASKET 41/4" $ 159.99 *

56C 2668 195800 MAIN VALVE 41/2" $ 197.00 *56C 2670 192913 MAIN VALVE 51/4" 238.70 *

56C 2685 280363 SHOE REPAIR KIT 4.5 Vo Improved $ 276.96 *


Price Change

THREADED GATE VALVEIRON BODY & BRONZE TRIM. NON-RISING STEM. WITH HANDWHEEL. NATIONAL PIPE THREADED ENDS.

SLIP JOINT GATE VALVEIRON BODY & BRONZE TRIM. NON-RISING STEM. 2" OPERATING NUT. PVC RADIAL COMPRESSION ENDS. PVC GASKET.

March 15, 2018 Q-6

WATERWORKS Q

VALVE SIZE

CENTERLINE TO STEM

TOP

OUTSIDE DIAMETER

FLANGED (FACE TO FACE)

DIAMETER OF HAND-

WHEEL

TAPPINGBOSSES

(CNTR TO CNTR)

TAPPING BOSS

DIAMETER

BOLT CIRCLE

DIAMETER

MAXIMUM TAP SIZE

INSIDE DIAMETER

DEPTH OF SOCKET

MECHANICAL JOINT

(END TO END)

A B C D E F G H K L M4" 16.31 9.0 9.0 11.0 5.25 1.5 7.5 0.75 4.9 2.5 10.06" 20.12 11.0 10.5 13.0 6.19 2.25 9.5 1.25 7.0 2.5 11.58" 23.75 13.5 11.5 14.0 7.50 2.25 11.75 1.5 9.15 2.5 11.510" 27.75 16.0 13.0 16.0 8.25 2.25 14.25 1.5 11.2 2.5 13.012" 31.50 19.0 14.0 16.0 8.50 3.0 17.0 2.0 13.2 2.5 14.0

FLANGED GATE VALVEIRON BODY & BRONZE TRIM. NON-RISING STEM. FURNISHED WITH HANDWHEEL. FLANGED ENDS. RESILIENT SEAT.STOCKED IN: 4", 6", 8", 10" & 12"


56C 3060 A-2361-6 2" $ 439.56 56C 3110 A-2361-6 3" 622.87 56C 2880 A-2361-6 4" 696.04

MECHANICAL JOINT GATE VALVEIRON BODY & BRONZE TRIM. NON-RISING STEM. 2" OPERATING NUT. MJ ENDS & ACCESSORIES.STOCKED IN: 4", 6", 8", 10" & 12"


56C 3760 A-2361-20 2" $ 5443.64 *56C 2905 A-2361-20 4" 702.47 * 56C 2910 A-2361-20 6" 896.00 *

56C 2930 A-2361-20 10" 2,225.03 *56C 2920 A-2361-20 8" 1,427.04 *

GATE VALVES

56C 2890 A-2361-6 6" 930.46 56C 2891 A-2361-6 8" 1,454.01 56C 2892 A-2361-6 10" 2,310.57 56C 3360 A-2361-6 12" 2,789.67

56C 2940 A-2361-20 12" 2,815.47 *


56C 4260 A-2360-37 2" $ 456.74 56C 4300 A-2360-37 3" 667.70 56C 4410 A-2360-37 4" 763.92


56C 3410 A-2360-8 2" $ 428.81 56C 3460 A-2360-8 3" 632.14

*Price Change

FLANGED X MECHANICAL JOINT GATE VALVEMJ WITH ACCESSORIES X 150 LB FLANGE LESS ACCESSORIES. IRON BODY & BRONZE TRIM. NON RISING STEM. FURNISHED WITH 2" OPERATING NUT. RESILIENT SEAT. STOCKED IN: 4", 6" & 8"


56C 2895 A-2361-16 4" $ 670.25 *56C 2900 A-2361-16 6" 896.00 * 56C 2903 A-2361-16 8" 1,400.13 *

MECHANICAL JOINT TAPPING VALVEMJ WITH ACCESSORIES X FLANGE WITH CENTERING RING & ACCESSORIES. IRON BODY & BRONZE TRIM. NON RISING STEM. FURNISHED WITH 2" HANDWHEEL. RESILIENT SEAT.


56C 7110 T-2360-16-D 4" $ 937.91 56C 7160 T-2360-16-D 6" 1,300.0956C 7210 T-2360-16-D 8" 1,928.03

56C 7270 T-2360-16-D 12" 4,411.79

MECHANICAL JOINT TAPPING SLEEVED-150 MJ TAPPING SLEEVE WITH DUCK-TIPPED GASKETS FOR DUCTILE IRON PIPE. 200 PSI WORKING PRESSURE. STOCKED IN THE SIZES SHOWN BELOW.


56C 5410 H-615 4" x 4" $ 1,223.76 *56C 5460 H-615 4" x 2" 288.96 *56C 5465 H-615 4" x 3" 288.96 *

56C 5560 H-615 6" x 6" $ 1,454.88 *56C 5710 H-615 6" x 4" 1,454.88 *

56C 7260 T-2360-16-D 10" $ 2,886.65

GATE VALVE TAPPING VALVE TAPPING SLEEVE

Q-7 March 15, 2018

56C 5760 H-615 8" x 8" $ 1,934.34 *56C 5810 H-615 8" x 4" 1,786.96 *56C 5860 H-615 8" x 6" 1,786.96 *

56C 5960 H-615 10" x 4" $ 3,534.30 *56C 6010 H-615 10" x 6" 3,534.30 *56C 6050 H-615 10" x 8" 3,755.43 *

56C 6110 H-615 12" x 4" $ 3,534.30 *56C 6160 H-615 12" x 6" 3,534.30 *56C 6210 H-615 12" x 8" 3,754.40 *

56C 5910 H-615 10" x 10" $ 3,828.98 *

56C 6220 H-615 12" x 12" $ 4,466.17 *


*Price Change

FLANGED X MECHANICAL JOINT BUTTERFLY VALVEMECHANICAL JOINT WITH ACCESSORIES X FLANGE WITH CENTERING RING & ACCESSORIES. IRON BODY & BRONZE TRIM. NON RISING STEM. FURNISHED WITH 2" OPERATING NUT. RESILIENT SEAT.

Manuf No. Price Each

B-3211-20 Price On Application

MECHANICAL JOINT CUT-IN VALVED-150 MECHANICAL JOINT ENDS WITH ACCESSORIES. IRON BODY & BRONZE TRIM. NON RISING STEM. 2" OPERATING NUT. RESILIENT SEAT. STOCKED IN: 4", 6" & 8"


56C 7815 C-2360-45 4" $ 1,781.51 *56C 7820 C-2360-45 6" 2,422.69 *56C 7825 C-2360-45 8" 3,75.31 *

MECHANICAL JOINT CUT-IN SLEEVED-150 MECHANICAL JOINT SLEEVE. PLAIN RUBBER GASKET FOR OLD STYLE CAST IRON PIPE. GASKETS IN STOCK FOR USE ON DUCTILE IRON PIPE. STOCKED IN: 4", 6", 8", 10" & 12"


56C 7460 H-841 4" $ 709.28 *56C 7510 H-841 6" 899.98 *56C 7560 H-841 8" 1,239.65 *

56C 7565 H-841 12" 2,045.72 *56C 7563 H-841 10" $ 1,722.38 *

56F 7840 194732 4" Duck Tipped Gasket $ 51.55 * 56F 7842 194733 6" Duck Tipped Gasket 66.95 *

FIBER GASKET56F 0165 H-10024 3/4" Fiber Gasket $ .13

56F 0210 H-10029 1" Copper & Asbestos Gasket $.40 COPPER & ASBESTOS GASKET

DUCK TIPPED GASKETS

56F 7870 194738 4" Plain Rubber Gasket $ 29.72 *56F 7872 194739 6" Plain Rubber Gasket 41.78 *

PLAIN RUBBER GASKETS

56F 0260 H-10033-N 3/4" CC Plug $ 19.3656F 0280 H-10033-N 1" CC Plug 20.44

PLUGS

BRASS BUSHING56F 0290 H-10036-N 1" x 3/4" CC Brass Bushing $ 54.12

May 25, 2017 Q-7A


WATERWORKS Q

CUT-IN VALVE CUT-IN SLEEVE BUTTERFLY VALVE Price Change

56D 3010 367-5034 3" 32.0056D 3000 367-5032 2" $ 22.67

56D 3020 367-5036 4" 40.00

VALVE BOX RISERSAVOID BREAKING UP OLD CONCRETE TO RAISE VALVE BOX TO NEW GRADE OF ROAD TO BE PAVED. SIMPLY REMOVE EXISTING VALVE BOX LID, INSERT RISER & REPLACE LID.


Q-8 May 25, 2017

WATERWORKS Q

GRAVITY OPERATED FLANGED SWING CHECK VALVEIRONBODY•BRONZEDISC&SEAT•STOCKEDINSIZES 4", 6" & 8"

SSC No. Manuf No. Size E G H J K L Price Each

56C 4560 A-2602-6 4" 71/4" 127/8" 15/16" 9" 7" 211/16"" $ 1,142.46 *

56C 4660 A-2602-6 8" 101/2" 191/2" 11/8" 11/2" 111/2" 31/4" 3,103.9256C 4610 A-2602-6 6" 9" 161/2" 1" 11" 93/8" 31/4" 1,567.82 *

SPRING & LEVER FLANGED SWING CHECK VALVESPRING & LEVER: RONBODY•BRONZEDISC&SEAT•STOCKEDINSIZES 4" & 6"

56C 4510 A-2602-6-02 4" 71/4" 127/8" 15/16" 9" 7" 211/16" $ 1,190.40 *56C 4530 A-2602-6-02 6" 9" 161/2" 1" 11" 93/8" 31/4" 1,633.10 *

SSC No. Manuf No. Size E G H J K L Price Each

CHECK VALVES VALVE BOX RISERS

VALVE OPERATING WRENCHTEE HANDLE & SOCKET TO FIT 2" SQUARE WRENCH NUT.

56C 1900 A-24610 5' $ 130.66 *56C 1920 A-24610 6' 141.33 *

SSC No. Manuf No. Length Price Each



*Price Change

56D 1060 562-S/6850 27" to 37" 16" 45 Lbs 24" 35 Lbs 115.2056D 1010 461-S/6850 19" to 22" 10" 35 Lbs 15" 25 Lbs $ 49.00

56D 1210 664-S/6850 39" to 60" 26" 65 Lbs 36" 45 Lbs 176.0056D 1160 564-S/6850 39" to 50" 16" 45 Lbs 36" 45 Lbs 166.40

56D 1215 16-T 16" For 562-S & 564-S 32 Lbs $ 37.63 56D 1220 26-T 26" For 664-S 52 Lbs 52.13

VALVE BOX TOP LESS LID

56D 1225 36-B 36" For 564-S 45 Lbs $ 53.00 VALVE BOX BOTTOM LESS LID

TOP BOTTOMSSC No. Manuf No. Size Lgth Wgt Lgth Wgt Price Each

56D 1230 58 14" Height Increase 18" Overall Length 25 Lbs $ 40.0056D 1235 59 18" Height Increase 24" Overall Length 30 Lbs 50.00

EXTENSIONS FOR SERIES 6850 VALVE BOX

TOP HAT VALVE BOX RING & COVERS FITS OVER 6" PVC PIPE

56D 1211 5218S With Lid Marked "SEWER" 24 Lbs $ 50.40 56D 1213 5218 With Lid Marked "WATER" 24 Lbs 50.40

TOP HAT VALVE BOX COVER ONLY56D 1214 5219S Lid Marked "SEWER" $ 18.13

August 17, 2017 Q-8A

SERIES 6850 2 PIECE SCREW TYPE VALVE BOXWITH LID MARKED "WATER" • 51/4" SHAFT FOR 4" TO 12" VALVES

WATERWORKS Q

VALVE BOXES & ACCESSORIES

56D 1810 143-R/6870 36" to 48" 18" 40 Lbs 34" 34 Lbs 193.74 56D 1760 142-R/6870 30" to 42" 18" 40 Lbs 27" 30 Lbs $ 97.04

56D 1830 144-RR 39" to 60" 26" 45 Lbs 36" 35 Lbs 246.94 *

56D 1850 49 Extension For 143-R Box $ 59.22

SERIES 6870 ROADWAY BOXWITH LID MARKED WATER • 41/4" SHAFT FOR 2", 21/2" & 3" VALVES • ARCH BASE & ROUND HEAD

TOP BOTTOMSSC No. Manuf No. Size Lgth Wgt Lgth Wgt Price Each

2" 3" 4" 6" 8" 10" 12"

MINIMUM & MAXIMUM TRENCH DEPTHS FOR

VALVE BOXES

461-S 23 to 29" 28 to 34" 31 to 37" 35 to 41" 39 to 45" 44 to 50" 48 to 54"562-S 29 to 41" 34 to 46" 37 to 49" 41 to 53" 45 to 57" 50 to 62" 54 to 66"564-S 41 to 53" 46 to 58" 49 to 61" 53 to 65" 57 to 69" 62 to 74" 66 to 78"664-S 41 to 65" 46 to 70" 49 to 73" 53 to 77" 57 to 81" 62 to 86" 66 to 90"666-S 53 to 77" 58 to 82" 61 to 85" 65 to 89" 69 to 93" 74 to 98" 78 to 102"668-S 65 to 89" 70 to 94" 73 to 97" 77 to 101" 81 to 105" 86 to 110" 90 to 114"

WATER

* Price Change

WATER

MUSHROOM VALVE BOX 6" DROP LID56D 1212 6458 6" Cast Iron Lid 13 Lbs $ 20.40

Q-9 August 17, 2017


GROUND KEY CORPORATION STOPS

GROUND KEY CORPORATION STOPMALE IP THREAD INLET & OUTLET

SSC No. Manuf No. Size Inlet & Outlet Price Each

56F 0150 H-10012N 3/4" Male IP Thread Inlet & Outlet $ 48.45

56F 0100 H-9969N 2" Male IP Thread Inlet & Outlet ORICORP STOP $ 345.70

56F 0152 H-10012N 1" Male IP Thread Inlet & Outlet 73.15

GROUND KEY CORPORATION STOPI.P. THREAD INLET & F.I.P THREAD OUTLET


56F 0300 H-10046N 2" I.P. Thread Inlet & F.I.P Thread Outlet $ 334.30

H-10012N

H-10046N

GROUND KEY CORPORATION STOPMUELLER CC THREAD INLET & FLARE OUTLET


56F 4930 H-15000N 5/8" x 3/4" Mueller CC Thread Inlet & Flare Outlet $ 52.41

56F 4970 H-199017N 3/4" Less Nut Mueller CC Thread Inlet & Flare Outlet 41.34 56F 4990 H-15000N 1" Mueller CC Thread Inlet & Flare Outlet 70.87

56F 4950 H-15000N 3/4" Mueller CC Thread Inlet & Flare Outlet 46.43

56F 5020 H-199017N 1" Less Nut Mueller CC Thread Inlet & Flare Outlet 61.51

56F 5060 H-15000N 2" Mueller CC Thread Inlet & Flare Outlet 373.1856F 5040 H-15000N 11/2" Mueller CC Thread Inlet & Flare Outlet 203.37

H-15000N

GROUND KEY CORPORATION STOPMUELLER CC THREAD INLET & COMPRESSION OUTLET


56F 5110 H-15008N 3/4" CTS Mueller CC Thread Inlet & Compression Outlet $ 49.79

56F 5140 H-15009N 3/4" IPS Mueller CC Thread Inlet & Compression Outlet 64.7956F 5150 H-15009N 1" IPS Mueller CC Thread Inlet & Compression Outlet 101.68

56F 5130 H-15008N 1" CTS Mueller CC Thread Inlet & Compression Outlet 75.40 H-15008N

GROUND KEY CORPORATION STOPMALE IP THREAD INLET & FLARE OUTLET


56F 5210 H-15025N 3/4" Male IP Thread Inlet & Flare Outlet $ 46.43

56F 5240 H-15025N 11/4" Male IP Thread Inlet & Flare Outlet 213.3456F 5230 H-15025N 1" Male IP Thread Inlet & Flare Outlet 70.87

GROUND KEY CORPORATION STOPMALE IP THREAD INLET & COMPRESSION OUTLET


56F 5245 H-15028N 3/4" Male IP Thread Inlet & Compression Outlet $ 49.7956F 5250 H-15028N 1" Male IP Thread Inlet & Compression Outlet 75.40

GROUND KEY CORPORATION STOPI.P. THREAD INLET & COMPRESSION OUTLET


56F 5255 H-15029N 3/4" IPS I.P. Thread Inlet & Compression Outlet $ 57.4056F 5260 H-15029N 1" IPS I.P. Thread Inlet & Compression Outlet 101.67

H-15025N

H-15028N

H-15029N

H-9969N

August 18, 2016 Q-9A


WATERWORKS Q

300TM BALL CORPORATION STOPS ORI-CORP® CORPORATION STOPS

300TM BALL CORPORATION STOP MUELLER CC THREAD INLET & FLARE OUTLET


56F 0070 B-25000N 11/2" Mueller CC Thread Inlet & Flare Outlet $ 213.7256F 0080 B-25000N 2" Mueller CC Thread Inlet & Flare Outlet 373.30

300TM BALL CORPORATION STOP MUELLER CC THREAD INLET & COMPRESSION OUTLET


56F 0090 B-25008N 11/2" Mueller CC Thread Inlet & Compression Outlet $ 213.7256F 0095 B-25008N 2" Mueller CC Thread Inlet & Compression Outlet 353.43

300TM BALL CORPORATION STOP I.P. THREAD INLET & PACK JOINT FOR IPS PVC OUTLET


56F 9760 V-25058N 2" I.P. Thread Inlet & Pack Joint For IPS PVC $ 358.03

B-25000N

V-25058N

B-25008N

ORI-CORP® CORPORATION STOP MUELLER CC THREAD INLET & COMPRESSION OUTLET


56F 5160 H-15013N 11/2" CTS Mueller CC Thread Inlet & Compression Outlet $ 220.8356F 5170 H-15013N 2" CTS Mueller CC Thread Inlet & Compression Outlet 365.31 H-15013N

CORPORATION STOP COUPLINGS

EIGHTH BEND CORPORATION STOP COUPLING WITH COPPER GASKET SWIVEL NUT WITH INSIDE THREAD INLET & FLARE OUTLET


56F 5350 H-15064-N 3/4" Swivel Nut With Inside Thread Inlet & Flare Outlet $ 45.1256F 5370 H-15064-N 1" Swivel Nut With Inside Thread Inlet & Flare Outlet 64.17

EIGHTH BEND CORPORATION STOP COUPLING WITH COPPER GASKET SWIVEL NUT WITH INSIDE COPPER THREAD INLET & MUELLER 110 CONDUCTIVE COMPRESSION OUTLET FOR CTS OD TUBING


56F 5550 H-15075-N 3/4" Swivel Nut With Inside Copper Thrd Inlet & Cond. Compr. Outlet $ 66.60 56F 5560 H-15075-N 1" Swivel Nut With Inside Copper Thrd Inlet & Cond. Compr. Outlet 77.65

QUARTER BEND CORPORATION STOP COUPLING WITH COPPER GASKET SWIVEL NUT WITH INSIDE THREAD INLET & FLARE OUTLET


56F 5390 H-15069-N 3/4" Swivel Nut With Inside Thread Inlet & Flare Outlet $ 45.4956F 5440 H-15069-N 1" Swivel Nut With Inside Thread Inlet & Flare Outlet 56.79

QUARTER BEND CORPORATION STOP COUPLING WITH COPPER GASKET SWIVEL NUT WITH INSIDE COPPER THREAD INLET & MUELLER 110 CONDUCTIVE COMPRESSION OUTLET FOR CTS OD TUBING


56F 5570 H-15076-N 3/4" Swivel Nut With Inside Copper Thrd Inlet & Cond. Compr. Outlet $ 53.63 56F 5580 H-15076-N 1" Swivel Nut With Inside Copper Thrd Inlet & Cond. Compr. Outlet 69.68

H-15064

H-15075

H-15069

H-15076

STRAIGHT CORPORATION STOP COUPLING WITH COPPER GASKET INSIDE FLARE THREAD INLET & IPS INSERT OUTLET


56F 3820 H-12203N 3/4" Inside Flare Thread Inlet & IPS Insert Outlet $ 61.36

Q-9B August 18, 2016


CORPORATION STOP COUPLINGS GASKETS

STRAIGHT CORPORATION STOP COUPLING WITH COPPER GASKET INSIDE FLARE THREAD INLET & MUELLER 110 CONDUCTIVE COMPRESSION OUTLET FOR CTS PLASTIC PIPE


56F 5490 H-15071N 3/4" CTS Inside Flare Thrd Inlet & Mueller 110 Cond. Compr. Outlet $ 25.9656F 5530 H-15071N 1" CTS Inside Flare Thrd Inlet & Mueller 110 Cond. Compr. Outlet 38.13

STRAIGHT CORPORATION STOP COUPLING WITH COPPER GASKET INSIDE FLARE THREAD INLET & MUELLER 110 CONDUCTIVE COMPRESSION OUTLET FOR IPS PLASTIC PIPE


56F 5532 H-15072N 3/4" IPS Inside Flare Thrd Inlet & Mueller 110 Cond. Compr. Outlet $ 42.1156F 5534 H-15072N 1" IPS Inside Flare Thrd Inlet & Mueller 110 Cond. Compr. Outlet 50.85

STRAIGHT CORPORATION STOP COUPLING WITH COPPER GASKET INSIDE FLARE THREAD INLET & INSTA-TITE OUTLET FOR POLY PIPE


56F 5536 H-15073N 3/4" Inside Flare Thread Inlet & Insta-Tite Outlet For Poly Pipe $ 32.0556F 5538 H-15073N 1" Inside Flare Thread Inlet & Insta-Tite Outlet For Poly Pipe 51.80

STRAIGHT CORPORATION STOP COUPLING WITH COPPER GASKET INSIDE FLARE THREAD INLET & FEMALE IPT OUTLET


56F 5540 H-15082N 3/4" Inside Flare Thread Inlet & Female IPT Outlet $ 27.2556F 5541 H-15082N 1" Inside Flare Thread Inlet & Female IPT Outlet 49.61

H-15071N

H-15073N

H-15082N

H-12203N

COPPER CORPORATION STOP GASKETS


56F 5270 H-15053N 3/4" Copper Corporation Stop Gasket $ 1.3756F 5290 H-15053N 1" Copper Corporation Stop Gasket 1.91 H-15053N

H-15072N


56F 5700 H-15172N 3/4" With Quarter Turn Check $ 89.5356F 5705 H-15172N 1" With Quarter Turn Check 151.16

56F 5710 H-15174N 3/4" With Quarter Turn Check $ 93.62

MARK II ORISEAL CURB VALVEFEMALE IP THREAD INLET & FEMALE IP THREAD OUTLET


56F 1110 H-10283N 3/4" With Quarter Turn Check $ 79.1156F 1130 H-10283N 1" With Quarter Turn Check 135.3256F 1150 H-10283N 11/4" With Quarter Turn Check 201.8856F 1160 H-10283N 11/2" With Quarter Turn Check 253.7456F 1190 H-10283N 2" With Quarter Turn Check 412.30

56F 1195 H-10284N 3/4" With Quarter Turn Check $ 84.0756F 1197 H-10284N 1" With Quarter Turn Check 140.1756F 1199 H-10284N 11/4" With Quarter Turn Check 207.22

56F 1203 H-10284N 2" With Quarter Turn Check 417.6656F 1201 H-10284N 11/2" With Quarter Turn Check 259.19

August 7, 2014 Q-10

WATERWORKS Q

CURB VALVES & STOPS

56F 0010 B-20283N 11/2" With Quarter Turn Check $ 255.0756F 0020 B-20283N 2" With Quarter Turn Check 371.31

MUELLER 300TM BALL CURB VALVEFEMALE IP THREAD INLET & FEMALE IP THREAD OUTLET


MARK II ORISEAL CURB VALVEMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR CTS O.D. TUBING INLET & FEMALE IP THREAD OUTLET


MARK II ORISEAL CURB VALVECOPPER FLARE INLET & FEMALE IP THREAD OUTLET



MARK II ORISEAL CURB VALVECOPPER FLARE INLET & COPPER FLARE OUTLET



MARK II ORISEAL CURB VALVEMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR CTS O.D. TUBING INLET & OUTLET


MARK II ORISEAL CURB VALVE WITH STOP & WASTEFEMALE IP THREAD INLET & FEMALE IP THREAD OUTLET



MARK III ORISEAL CURB VALVEFEMALE IP THREAD INLET & FEMALE IP THREAD OUTLET


56F 5064 H-1500-2N 3/4" With Quarter Turn Check $ 127.3456F 5065 H-1500-2N 1" With Quarter Turn Check 135.32

ORISEAL CURB VALVEFEMALE IP THREAD INLET & FEMALE IP THREAD OUTLET


56F 1220 H-10291N 3/4" With Quarter Turn Check $ 207.8556F 1240 H-10291N 1" With Quarter Turn Check 224.5056F 1280 H-10291N 11/2" With Quarter Turn Check 374.0356F 1310 H-10291N 2" With Quarter Turn Check 519.01

ORISEAL CURB VALVECOPPER FLARE INLET & FEMALE IP THREAD OUTLET



Q-10A August 7, 2014

CURB VALVES & STOPS

ORISEAL CURB VALVECOPPER FLARE INLET & COPPER FLARE OUTLET


56F 5890 H-15201N 3/4" With Quarter Turn Check $ 225.4356F 5891 H-15201N 1" With Quarter Turn Check 279.0356F 5892 H-15201N 11/2" With Quarter Turn Check 545.4356F 5895 H-15201N 2" With Quarter Turn Check 840.93

INVERTED KEY CURB STOPCOPPER FLARE INLET & FEMALE IP THREAD OUTLET


56F 5760 H-15175N 1" With Quarter Turn Check $ 133.38

INVERTED KEY CURB STOPCOPPER FLARE INLET & COPPER FLARE OUTLET



WATERWORKS Q


August 7, 2014 Q-11

STRAIGHT SERVICE COUPLINGCOPPER FLARE TO OUTSIDE IRON PIPE THREAD

SSC No. Manuf No. Size Connections Price Each

56F 7110 H-15425N 1/2" Copper Flare To Outside Iron Pipe Thread $ 24.73

56F 7150 H-15425N 3/4" x 1" Copper Flare To Outside Iron Pipe Thread 23.3556F 7130 H-15425N 3/4" Copper Flare To Outside Iron Pipe Thread 20.24

56F 7170 H-15425N 1" Copper Flare To Outside Iron Pipe Thread 28.9356F 7190 H-15425N 11/4" Copper Flare To Outside Iron Pipe Thread 58.11

56F 7240 H-15425N 2" Copper Flare To Outside Iron Pipe Thread 164.9756F 7220 H-15425N 11/2" Copper Flare To Outside Iron Pipe Thread 89.90

H-15425N


SERVICE COUPLINGS

STRAIGHT SERVICE COUPLINGMUELLER 110 CONDUCTIVE COMPRESSION TO OUTSIDE I.P. THREAD FOR TYPE K COPPER SERVICE OR PLASTIC PIPE WITH SAME OD


56F 7270 H-15428N 3/4" Mueller 110 Conductive Compression To Outside IP Thread $ 22.80

56F 7291 H-15428N 1" x 3/4" Mueller 110 Conductive Compression To Outside IP Thread 23.5756F 7290 H-15428N 1" Mueller 110 Conductive Compression To Outside IP Thread 26.93

56F 7292 H-15428N 11/4" Mueller 110 Conductive Compression To Outside IP Thread 52.0156F 7293 H-15428N 11/2" Mueller 110 Conductive Compression To Outside IP Thread 74.4856F 7295 H-15428N 2" Mueller 110 Conductive Compression To Outside IP Thread 108.52

STRAIGHT SERVICE COUPLINGMUELLER 110 CONDUCTIVE COMPRESSION FOR IPS PE PIPE TO M.I.P. THREAD


56F 7310 H-15429N 3/4" Mueller 110 Cond. Compr. For IPS PE Pipe To M.I.P. Thread $ 27.9956F 7311 H-15429N 1" Mueller 110 Cond. Compr. For IPS PE Pipe To M.I.P. Thread 43.89

STRAIGHT SERVICE COUPLINGCOPPER FLARE TO INSIDE IRON PIPE THREAD


56F 7320 H-15450N 1/2" Copper Flare To Inside Iron Pipe Thread $ 33.17

56F 7350 H-15450N 3/4" x 1" Copper Flare To Inside Iron Pipe Thread 31.6456F 7340 H-15450N 3/4" Copper Flare To Inside Iron Pipe Thread 20.09

56F 7380 H-15450N 1" Copper Flare To Inside Iron Pipe Thread 30.6456F 7410 H-15450N 11/4" Copper Flare To Inside Iron Pipe Thread 60.77

STRAIGHT SERVICE COUPLINGMUELLER 110 CONDUCTIVE COMPRESSION TO INSIDE I.P. THREAD FOR TYPE K COPPER SERVICE OR PLASTIC PIPE WITH SAME OD


56F 7480 H-15451N 3/4" Mueller 110 Conductive Compression To Inside IP Thread $ 24.43

56F 7510 H-15451N 1" Mueller 110 Conductive Compression To Inside IP Thread 34.9356F 7485 H-15451N 1" x 3/4" Mueller 110 Conductive Compression To Inside IP Thread 28.27

56F 7511 H-15451N 11/4" Mueller 110 Conductive Compression To Inside IP Thread 59.7956F 7513 H-15451N 11/2" Mueller 110 Conductive Compression To Inside IP Thread 95.2456F 7514 H-15451N 2" Mueller 110 Conductive Compression To Inside IP Thread 113.49

STRAIGHT SERVICE COUPLINGMUELLER 110 CONDUCTIVE COMPRESSION TO INSIDE I.P. THREAD FOR IPS PLASTIC PIPE


56F 7515 H-15454N 3/4" Mueller 110 Cond. Compr. To Inside I.P. Thread For IPS Plastic Pipe $ 38.4456F 7520 H-15454N 1" Mueller 110 Cond. Compr. To Inside I.P. Thread For IPS Plastic Pipe 38.44

STRAIGHT SERVICE COUPLINGFLANGE TO COPPER WITH GASKET - FOR EXTRA STRONG LEAD FLANGE


56F 7775 H-15505N 5/8" x 3/4" Flange To Copper With Gasket - For Extra Strong Lead Flange $ 31.71

H-15428N

H-15450N

H-15451N

H-15454N

H-15505N

H-15429N

Q-11A August 7, 2014


WATERWORKS Q

SERVICE COUPLINGS

STRAIGHT SERVICE COUPLINGSMUELLER PACK JOINT CONNECTIONS TO IPS PVC PIPE


56F 9000 V-15401N 1" x 3/4" Mueller Pack Joint Connections - Both Ends - For IPS PVC Pipe $ 51.92

56F 9730 V-15442N 1" x 3/4" Mueller Pack Joint Connection To F.I.P. Thread For IPS PVC Pipe $ 44.33

56F 9710 V-15440N 11/2" x 11/2" Mueller Pack Joint Connection To M.I.P. Thread For IPS PVC Pipe $ 87.6356F 9720 V-15440N 2" x 2" Mueller Pack Joint Connection To M.I.P. Thread For IPS PVC Pipe 127.26

V-15401N

V-15442N

V-15440N

1/8 BEND SERVICE COUPLINGSWIVEL NUT WITH INSIDE IRON PIPE THREAD TO COPPER - WITH GASKET


56F 7713 H-15486N 3/4" Swivel Nut With Inside Iron Pipe Thread To Copper - With Gasket $ 77.4856F 7715 H-15486N 1" Swivel Nut With Inside Iron Pipe Thread To Copper - With Gasket 88.01

1/8 BEND SERVICE COUPLINGFLANGE TO COPPER WITH GASKET - FOR EXTRA STRONG LEAD FLANGE


56F 7790 H-15516N 5/8" x 3/4" Flange To Copper With Gasket - For Extra Strong Lead Flange $ 56.09

56F 7840 H-15516N 1" Flange To Copper With Gasket - For Extra Strong Lead Flange 104.7756F 7820 H-15516N 3/4" Flange To Copper With Gasket - For Extra Strong Lead Flange 60.77

H-15486N

1/4 BEND SERVICE COUPLINGCOPPER FLARE TO INSIDE IRON PIPE THREAD


56F 7550 H-15460N 3/4" Copper Flare To Inside Iron Pipe Thread $ 38.7756F 7560 H-15460N 1" Copper Flare To Inside Iron Pipe Thread 60.93

1/4 BEND SERVICE COUPLINGCOPPER FLARE TO COPPER FLARE


56F 7885 H-15525N 3/4" Copper Flare To Copper Flare $ 57.4956F 7900 H-15525N 1" Copper Flare To Copper Flare 77.09

1/4 BEND SERVICE COUPLINGMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR CTS OD - BOTH ENDS


56F 7910 H-15526N 3/4" Mueller 110 Cond. Compr. Connection For CTS OD - Both Ends $ 34.19

56F 7925 H-15526N 11/2" Mueller 110 Cond. Compr. Connection For CTS OD - Both Ends 149.0656F 7920 H-15526N 1" Mueller 110 Cond. Compr. Connection For CTS OD - Both Ends 43.89

56F 7930 H-15526N 2" Mueller 110 Cond. Compr. Connection For CTS OD - Both Ends 301.58

1/4 BEND SERVICE COUPLINGCOPPER FLARE TO OUTSIDE IRON PIPE THREAD


56F 7940 H-15530N 3/4" Copper Flare To Outside Iron Pipe Thread $ 20.6456F 7960 H-15530N 1" Copper Flare To Outside Iron Pipe Thread 34.32

1/4 BEND SERVICE COUPLINGMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR CTS OD TO OUTSIDE IRON PIPE THREAD


56F 7980 H-15531N 3/4" Mueller 110 Cond. Compr. Conn. For CTS OD To Outside I.P. Thrd $ 23.7156F 7985 H-15531N 1" Mueller 110 Cond. Compr. Conn. For CTS OD To Outside I.P. Thrd 40.96

H-15531N

H-15516N

H-15460N

H-15525N

H-15526N

H-15530N

August 7, 2014 Q-11B


SERVICE COUPLING • SERVICE TEES • SERVICE UNIONS

SERVICE TEECOPPER TO COPPER TO COPPER


56F 6530 H-15380N 3/4" Copper To Copper To Copper $ 45.77

56F 6630 H-15380N 1" x 3/4" Copper To Copper To Copper 89.2156F 6550 H-15380N 1" Copper To Copper To Copper 80.75

SERVICE TEECOMPRESSION TO COMPRESSION TO COMPRESSION


56F 6670 H-15381N 3/4" Compression To Compression To Compression $ 63.9556F 6690 H-15381N 1" Compression To Compression To Compression 88.66

3 PART STRAIGHT COMPRESSION SERVICE UNIONMUELLER 110 CONDUCTIVE COMPRESSION FOR TYPE K COPPER SERVICE OR PLASTIC PIPE WITH SAME OD - BOTH ENDS


56F 6890 H-15403N 3/4" Mueller 110 Conductive Compr Connection - Both Ends $ 27.81

56F 6920 H-15403N 1" Mueller 110 Conductive Compr Connection - Both Ends 30.3556F 6895 H-15403N 1" x 3/4" Mueller 110 Conductive Compr Connection - Both Ends 30.68

56F 6925 H-15403N 11/4" Mueller 110 Conductive Compr Connection - Both Ends 86.8956F 6930 H-15403N 11/2" Mueller 110 Conductive Compr Connection - Both Ends 106.9856F 6935 H-15403N 2" Mueller 110 Conductive Compr Connection - Both Ends 144.49

1/4 BEND SERVICE COUPLINGSWIVEL NUT WITH INSIDE MUELLER I.P. THREAD TO COPPER - WITH GASKET


56F 7750 H-15491N 3/4" Swivel Nut With Inside Mueller I.P. Thread To Copper - With Gasket $ 55.0856F 7770 H-15491N 1" Swivel Nut With Inside Mueller I.P. Thread To Copper - With Gasket 67.45

56F 6700 H-15381N 11/2" Compression To Compression To Compression 166.32 H-15381N

H-15403N

3 PART STRAIGHT COMPRESSION SERVICE UNIONMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR PE PLASTIC PIPE (I.P.S.) - BOTH ENDS


56F 6940 H-15404N 3/4" Mueller 110 Cond Compr Conn. For PE Plastic Pipe (I.P.S) - Both Ends $ 34.7256F 6950 H-15404N 1" Mueller 110 Cond Compr Conn. For PE Plastic Pipe (I.P.S) - Both Ends 69.29

3 PART STRAIGHT COMPRESSION SERVICE UNIONMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR COPPER OR PE PLASTIC TUBE X PE PLASTIC PIPE (I.P.S) - BOTH ENDS


56F 7070 H-15409N 3/4" Mueller 110 Cond Compr Conn. For Copper or PE Tube x PE Pipe (I.P.S.) $ 63.2156F 7080 H-15409N 1" Mueller 110 Cond Compr Conn. For Copper or PE Tube x PE Pipe (I.P.S.) 78.39

H-15404N

2 PART SERVICE UNIONCOPPER FLARE NUT TO FEMALE COPPER FLARE THREAD


56F 6990 H-15405N 3/4" Copper Flare Nut To Female Copper Flare Thread $ 19.87

56F 7060 H-15405N 11/2" Copper Flare Nut To Female Copper Flare Thread 128.4656F 7020 H-15405N 1" Copper Flare Nut To Female Copper Flare Thread 32.68

3 PART SERVICE UNIONCOPPER FLARE NUT TO COPPER FLARE NUT


56F 6790 H-15400N 3/4" Copper Flare Nut To Copper Flare Nut $ 25.6056F 6820 H-15400N 1" Copper Flare Nut To Copper Flare Nut 44.8156F 6840 H-15400N 11/4" Copper Flare Nut To Copper Flare Nut 92.6856F 6860 H-15400N 11/2" Copper Flare Nut To Copper Flare Nut 135.57

H-15409N

H-15491N

H-15380N

H-15405N

H-15400N

56F 8725 504391 1" IPS 8.66 *

SSC No. Manuf No. Conn. Size Tubing/Pipe OD Range Tubing/Pipe OD Range Tubing/Pipe ID Range Price Each

56F 7950 506139 11/2" CTS 1.619" - 1.631" 0.181" - 0.199" 1.221" - 1.269" $ 6.1256F 7975 506141 2" CTS 2.119" - 2.131" 0.236" - 0.260" 1.599" - 1.659" 10.64

56F 8670 504281 3/4" CTS 0.871" - 0.879" 0.097" - 0.107" 0.657" - 0.685" $ 2.9256F 8720 504385 1" CTS 1.120" - 1.130" 0.125" - 0.137" 0.846" - 0.880" 3.13

INSERT LINER/STIFFENER FOR POLYETHYLENE MUELLER 110 COMPRESSION CONNECTIONS

INSERT LINER/STIFFENER FOR FOR 200# CTS POLYETHYLENE

56F 8680 504305 3/4" IPS $ 4.91 INSERT LINER/STIFFENER FOR FOR POLYETHYLENE PB160

56F 8735 505142 1" IPS 1.329" - 1.399" 0.150" - 0.170" 1.029" - 1.059" 5.0756F 8730 505141 3/4" IPS 1.045" - 1.110" 0.118" - 0.138" 0.809" - 0.834" $ 3.60 INSERT LINER/STIFFENER FOR FOR 200# IPS POLYETHYLENE

Q-11C August 7, 2014

WATERWORKS Q

2 BRANCH "Y" CONNECTIONCOPPER FLARE NUT INLET TO COPPER FLARE NUT OUTLET - INLET & OUTLET CAN BE REVERSED


56F 6110 H-15340N 1" x 11/2" Copper Flare Nut Inlet To Copper Flare Nut Outlet $ 159.30

2 BRANCH SHORT BODY "Y" CONNECTIONMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR CTS OD TUBING - BOTH ENDS


56F 6150 H-15343N 1" x 11/2" Inlet & Outlet Can Be Reversed $ 139.93H-15343N

3 BRANCH "Y" CONNECTIONCOPPER FLARE NUT INLET TO M.I.P. THREAD OUTLET - INLET & OUTLET CAN BE REVERSED


56F 6270 H-15346N 1" x 11/2" Copper Flare Nut Inlet To M.I.P. Thread Outlet $ 216.50

STAINLESS STEEL INSERT LINER/STIFFENERS

SERIES 70 INSERT LINER/STIFFENERFOR POLYETHYLENE (PEP)

SSC No. Manuf No. Nominal Size PEP ID Price Each

56F 7800 INSERT-75 2" IPS 2.067" $ 7.09 *

The Ford Meter Box Company, Inc.

COPPER TUBE NUTSSC No. Manuf No. Size Price Each

56F 7312 H-15430N 3/4" $ 7.4156F 7313 H-15430N 1" 9.36


56F 8940 581949 3/4" For Mueller 110 Compression Connections $ 3.9356F 8945 581951 1" For Mueller 110 Compression Connections 5.03

GASKET & GRIPPER ASSEMBLYFOR MUELLER 110 COMPRESSION CONNECTIONS

FLARING TOOL45° FLARE IN COPPER SERVICE PIPE


56F 8010 H-18000 3/4" $ 44.00 *56F 8030 H-18000 1" 55.96 *56F 8040 H-18000 11/4" 99.89 *

The Ford Meter Box Company, Inc. *Price Change

H-15340N

H-15346N

February 15, 2018 Q-12


SSC No. Manuf No. Size Register Length Operating Range Wgt Lbs. Price Each

56N 0500 M25 5/8" x 1/2" USG 71/2" 1/2 To 25 GPM 4.5 Lbs $ 99.98 *56N 0510 M25 5/8" x 3/4" USG 71/2" 1/2 To 25 GPM 4.5 Lbs 99.98 *

RECORDALL® M25 DISC SERIES WATER METERBRONZE •FORSMALLTOINTERMEDIATESERVICEAPPLICATIONS•LONGTERMFIELDPERFORMANCEFLOWRANGEFLEXIBILITY•LOWPRESSURELOSS•150PSIMAX•80°FMAX

56N 0520 M25 5/8" x 1/2" CF 71/2" 1/2 To 25 GPM 4.5 Lbs $ 99.98 *56N 0530 M25 5/8" x 3/4" CF 71/2" 1/2 To 25 GPM 4.5 Lbs 99.98 *


56N 0540 M35 3/4" SHORT USG 71/2" 3/4 To 35 GPM 5.5 Lbs $ 141.07 *56N 0550 M35 3/4" SHORT CF 71/2" 3/4 To 35 GPM 5.5 Lbs 141.07 *


56N 0560 M35 3/4" USG 9" 3/4 To 35 GPM 5.5 Lbs $ 141.07 *56N 0570 M35 3/4" CF 9" 3/4 To 35 GPM 5.5 Lbs 141.07 *


56N 0580 M55 1" USG 103/4" 1 To 55 GPM 8.8 Lbs $ 217.09 *56N 0590 M55 1" CF 103/4" 1 To 55 GPM 8.8 Lbs 217.09 *



56N 0600 M120 11/2" USG 13" 21/2 To 120 GPM 19 Lbs $ 649.89 *56N 0610 M120 11/2" CF 13" 21/2 To 120 GPM 19 Lbs 649.89 *



56N 0620 M170 2" USG 17" 21/2 To 170 GPM 30 Lbs $ 966.98 *56N 0630 M170 2" CF 17" 21/2 To 170 GPM 30 Lbs 966.98 *


RECORDALL® DISC SERIES BRONZE WATER METERS *Price ChangeBadger Meter, Inc.

Q-12A February 15, 2018

WATERWORKS Q

RECORDALL® WATER METERS • TURBO & COMPOUND SERIES


56N 0640 T-160 11/2" USG 13" 4 To 200 GPM 16.8 $ 1,051.88 *

RECORDALL® T-160 TURBO SERIES WATER METERBRONZE •FORFORCOMMERCIAL&INDUSTRIALAPPLICATIONS•MULTI-SYSTEMCAPATIBILITYEXTENDEDFLOWRANGE•LOWERPRESSURELOSS•150PSIMAX•120°FMAX


56N 0650 T-200 2" USG 10" 4 To 310 GPM 16.4 $ 1,203.93 *



56N 0660 T-450 3" USG 12" 5 To 550 GPM 34.0 $ 1,435.40 *



56N 0670 T-1000 4" USG 14" 10 To 1250 GPM 45.0 $ 2,166.78 *



56N 0680 450 3" USG 12" 5 To 660 GPM 17.2 $ 1,182.00 * NOTE: END CONNECTIONS NOT INCLUDED IN PRICE.

RECORDALL® 450 TURBO FIRE HYDRANT METERALUMINUMHOUSING•DOUBLEWALLSTAINLESSSTEELSCREENPROTECTSMETERINGELEMENTBUILT-INFLOWRESTRICTORTOPREVENTELEMENTOVERSPEEDING•150PSIMAX

SSC No. Size Register Length Operating Range Wgt Lbs. Price Each

56N 0690 2" USG 151/4" 1/2 To 200 GPM 63.0 $ 2,621.49 *

RECORDALL® 2" COMPOUND SERIES WATER METERBRONZE&LOWLEADALLOY•WIDESTOPERATINGRANGE&EXTENDEDLOWFLOWACCURACIESTHESOLUTIONFORRAPIDLYCHANGINGFLOWRATES.•150PSIMAX•120°FMAX

SSC No. Size Register Length Operating Range Wgt Lbs. Price Each

56N 0695 3" USG 17" 1/2 To 450 GPM 99.5 $ 3,172.78 *

RECORDALL® 3" COMPOUND SERIES WATER METERBRONZE&LOWLEADALLOY•WIDESTOPERATINGRANGE&EXTENDEDLOWFLOWACCURACIESTHESOLUTIONFORRAPIDLYCHANGINGFLOWRATES.•150PSIMAX•120°FMAX

*Price ChangeBadger Meter, Inc.

SSC No. Manuf No. Meter Size Price Each

56F 4350 B-24118RN 5/8" x 12" M.I.P. Meter Thread Ends $ 151.93

August 7, 2014 Q-13


56F 4020 B-2404RN 5/8" x 7" Lock Wing Stop & Multi-Purpose Threads $ 128.0556F 4025 B-2404RN 5/8" x 12" Lock Wing Stop & Multi-Purpose Threads 132.21

COPPER METER YOKE WITH HORIZONTAL INLET & OUTLETLOCK WING 300TM REDUCED PORT ANGLE BALL METER VALVE

56F 4030 B-2404RN 5/8" x 3/4" x 7" Lock Wing Stop & Multi-Purpose Threads 131.1456F 4033 B-2404RN 5/8" x 3/4" x 12" Lock Wing Stop & Multi-Purpose Threads 139.5656F 4040 B-2404RN 5/8" x 3/4" x 15" Lock Wing Stop & Multi-Purpose Threads 146.5356F 4045 B-2404RN 5/8" x 3/4" x 18" Lock Wing Stop & Multi-Purpose Threads 162.90

56F 4210 B-2404RN 1" x 10" Lock Wing Stop & Multi-Purpose Threads 259.9456F 4220 B-2404RN 1" x 12" Lock Wing Stop & Multi-Purpose Threads 269.1156F 4222 B-2404RN 1" x 15" Lock Wing Stop & Multi-Purpose Threads 280.27


COPPER METER YOKES


56F 4035 H-2404-2N 5/8" x 3/4" x 12" With Check Valve $ 195.21

COPPER METER YOKE WITH HORIZONTAL INLET & OUTLETWITH CHECK VALVE


56F 4225 B-2410RN 5/8" x 7" Lock Wing Stop & Multi-Purpose Threads $ 167.78 *56F 4230 B-2410RN 5/8" x 3/4" x 7" Lock Wing Stop & Multi-Purpose Threads 128.05

COPPER METER YOKE WITH VERTICAL INLET & OUTLETLOCK WING 300TM REDUCED PORT ANGLE BALL METER VALVE

56F 4233 B-2410RN 1" x 10" Lock Wing Stop & Multi-Purpose Threads 243.15


56F 4235 B-2434RN 5/8" x 3/4" x 7" With Lock Wing Stop & I.P. Threads $ 145.4956F 4300 B-2434RN 5/8" x 3/4" x 12" With Lock Wing Stop & I.P. Threads 156.81

COPPER METER YOKE WITH HORIZONTAL INLET & OUTLETLOCK WING 300TM REDUCED PORT ANGLE BALL METER VALVE

56F 0025 B-2423N 2" x 18" $ 1,693.69

COPPER METER YOKELOCK WING 300TM ANGLE BALL METER VALVE ON INLET & OUTLET • 11/2" BYPASS VALVE


56F 4448 B-24118RN 5/8" x 3/4" x 7" M.I.P. Meter Thread Ends 145.48

COPPER METER YOKE - RELOCATOR TYPEVERTICAL INLET & OUTLET • LOCK WING 300TM REDUCED PORT ANGLE BALL METER VALVE

56F 4450 B-24118RN 5/8" x 3/4" x 12" M.I.P. Meter Thread Ends 156.8156F 4455 B-24118RN 5/8" x 3/4" x 18" M.I.P. Meter Thread Ends 180.1056F 4460 B-24118RN 1" x 12" M.I.P. Meter Thread Ends 316.03


56F 4470 H-1412N 5/8" Multi-Purpose Threads $ 74.60

COPPER METER YOKE - BASEMENT TYPEVERTICAL INLET & OUTLET • PLAIN YOKE

56F 4480 H-1412N 1" Multi-Purpose Threads 134.52

H-2404-2N

B-2404RN

B-2410RN

B-24118RN

B-2434RN

B-2423N

*Price Change

H-1412N

Q-13A August 17, 2017


WATERWORKS Q

COPPER METER YOKE COUPLINGS

SSC No. Manuf No. Meter Size Connections Price Each

56F 4660 H-14222N 5/8" x 3/4" x 3/4" Multi-Purpose Thrd To Comb Tailpiece (Inside IP) Or Copper Flare Conn $ 23.3656F 4665 H-14222N 1" Multi-Purpose Thrd To Comb Tailpiece (Inside IP) Or Copper Flare Conn 36.75

COPPER METER YOKE COUPLINGMULTI-PURPOSE THREAD TO COMBINATION TAILPIECE (INSIDE IP THREAD) OR AS COPPER FLARE CONNECTION


56F 4667 H-14223N 5/8" x 3/4" x 3/4" Multi-Purpose Thrd To Comb Tailpiece (Outside IP) Or Copper Flare Conn $ 27.2456F 4668 H-14223N 1" Multi-Purpose Thrd To Comb Tailpiece (Outside IP) Or Copper Flare Conn 29.80

COPPER METER YOKE COUPLINGMULTI-PURPOSE THREAD TO COMBINATION TAILPIECE (OUTSIDE IP THREAD) OR AS COPPER FLARE CONNECTION


56F 4670 H-14227N 5/8" x 3/4" x 3/4" Multi-Purpose Thrd To Mueller 110 Compr Conn For CTS OD Plastic Tube $ 22.8056F 4680 H-14227N 1" Multi-Purpose Thrd To Mueller 110 Compr Conn For CTS OD Plastic Tube 32.63

COPPER METER YOKE COUPLINGMULTI-PURPOSE THREAD TO MUELLER 110 COMPRESSION CONNECTION FOR CTS OD PLASTIC TUBE FOR ASTM D2737, D2740 & D2666


56F 4685 H-14228N 5/8" x 3/4" x 3/4" Multi-Purpose Thrd To Mueller 110 Compr Conn For IPS OD Plastic Tube $ 32.9356F 4692 H-14228N 1" Multi-Purpose Thrd To Mueller 110 Compr Conn For IPS OD Plastic Tube 35.96

COPPER METER YOKE COUPLINGMULTI-PURPOSE THREAD TO MUELLER 110 COMPR CONN FOR IPS OD PLASTIC TUBE FOR POLYETHYLENE PIPE FOR ASTM D2239

H-14227N

H-14222N

H-14228N

H-14223N

SSC No. Manuf No. Meter Size Size & Type of Existing Pipe Price Each

56F 9610 HH1-34 5/8" 3/4" Copper Tubing $ 127.63 *56F 9615 HH3-34 3/4" 3/4" Copper Tubing 143.82 *

FORD HANDYHORNSINSIDE METER SETTING DEVICE WITH INTEGRAL INLET FOR METERING NEW OR EXISTING SERVICES OUTLET PACK JOINT CONNECTIONS


56F 9620 RESETTER-51 5/8" $ 114.69 *56F 9625 RESETTER-53 3/4" 134.58 *

FORD BASEMENT RESETTERSFOR EXISTING METER SERVICES TO CONVERT VERTICAL INDOOR SETTING TO HORIZONTAL POSITION


56F 9630 PB-1 5/8" 3/4" Male Pipe Threads On Ends $ 93.14 *

FORD PLUMBERHORNFOR METERING NEW SERVICES

The Ford Meter Box Company, Inc.

56F 9616 HH1-44-G 5/8" x 1" Grip Joint For 3/44" Copper Tubing 170.13 *

SSC No. Manuf No. Meter Size Size & Type of Existing Pipe Price Each

56F 9627 VB81-44-44G 5/8" x 7" Grip Joint For 1" Copper Or Plastic Tubing $ 227.93 *56F 8980 VB84-44-44G 1" x 10" Grip Joint For 1" Copper Or Plastic Tubing 384.50 *

FORD 80 SERIES COPPERSETTER FOR EXISTING SERVICEGRIP JOINT FOR CTS INLET & OUTLET SERV. LINE CONN. VERTICAL INLET & OUTLET • ANGLE BALL METER VALVE INLET

Note: All Prices Below Have Changed

May 21, 2015 Q-13B


METER STOPS

SSC No. Manuf No. Meter Size Inlet & Outlet Price Each

56F 4720 H-14255N 5/8" x 3/4" See Above $ 55.5256F 4730 H-14255N 5/8" x 3/4" x 3/4" See Above 55.52

GROUND KEY ANGLE METER STOPCOPPER SERVICE THREAD CONNECTION FOR ASTM B88 TYPE K COPPER TUBE INLET & METER SADDLE NUT OUTLET - PLAIN FLAT HEAD

56F 4750 H-14255N 1" See Above 75.60


56F 4825 H-14258N 5/8" x 3/4" x 1" See Above $ 65.4156F 4840 H-14258N 1" See Above 81.07

GROUND KEY ANGLE METER STOPMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR CTS OD TUBE INLET & METER SADDLE NUT DRILLED FOR WIRE SEAL OUTLET


56F 4850 H-14259N 5/8" x 3/4" x 3/4" See Above $ 65.41

GROUND KEY ANGLE METER STOPMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR IPS OD TUBE INLET & METER SADDLE NUT DRILLED FOR WIRE SEAL OUTLET


56F 4870 H-14265N 5/8" x 3/4" Inside I.P. Thread Inlet & Meter Saddle Nut Outlet $ 44.1256F 4915 H-14265N 5/8" x 3/4" x 3/4" Inside I.P. Thread Inlet & Meter Saddle Nut Outlet 44.12

GROUND KEY ANGLE METER STOPINSIDE I.P. THREAD INLET & METER SADDLE NUT OUTLET

56F 4917 H-14265N 1" Inside I.P. Thread Inlet & Meter Saddle Nut Outlet 67.55


56F 4920 H-14286N 11/2" Inside I.P. Thread Inlet & Meter Flange Outlet $ 227.1156F 4922 H-14286N 2" Inside I.P. Thread Inlet & Meter Flange Outlet 315.59

GROUND KEY ANGLE METER STOPINSIDE I.P. THREAD INLET & METER FLANGE OUTLET


56F 0030 B-24255RN 5/8" x 3/4" x 3/4" Copper Flare Nut & Meter Swivel Nut $ 67.04

300TM BALL ANGLE METER STOP QUARTER TURN CHECK & LOCK WING • COPPER FLARE NUT & METER SWIVEL NUT


56F 0035 B-24258RN 5/8" x 3/4" Mueller 110 Cond Compr Conn For CTS OD Tubing & Meter Swivel Nut $ 68.4456F 0040 B-24258RN 5/8" x 3/4" x 3/4" Mueller 110 Cond Compr Conn For CTS OD Tubing & Meter Swivel Nut 68.44

300TM BALL ANGLE METER STOP QUARTER TURN CHECK & LOCK WING • MUELLER 110 CONDUCTIVE COMPRESSION CONNECTION & METER SWIVEL NUT

56F 0041 B-24258RN 1" Mueller 110 Cond Compr Conn For CTS OD Tubing & Meter Swivel Nut 135.36


56F 0043 B-24265RN 5/8" x 3/4" F.I.P. & Meter Swivel Nut $ 55.4056F 0045 B-24265RN 5/8" x 3/4" x 3/4" F.I.P. & Meter Swivel Nut 55.40

300TM BALL ANGLE METER STOP QUARTER TURN CHECK & LOCK WING • F.I.P. & METER SWIVEL NUT


Q-13C August 7, 2014


WATERWORKS Q

METER STOPS


56F 0065 B-24286N 2" F.I.P. & Meter Flange $ 412.86

300TM BALL ANGLE METER STOP QUARTER TURN CHECK & LOCK WING • F.I.P. & METER FLANGE

METER COUPLINGS


56F 3180 H-10890N 5/8" x 1/2" Outside IP Thread On Tailpiece - Machined Inside & Outside $ 12.5356F 3210 H-10890N 5/8" x 3/4" x 3/4" Outside IP Thread On Tailpiece - Machined Inside & Outside 13.84

STRAIGHT METER COUPLINGOUTSIDE I.P. THREAD ON TAILPIECE - MACHINED INSIDE & OUTSIDE

56F 3250 H-10890N 1" Outside IP Thread On Tailpiece - Machined Inside & Outside 21.28


56F 3390 H-10892N 1/2" x 5/8" Outside IP Thread On Tailpiece $ 16.3556F 3420 H-10892N 5/8" x 3/4" x 3/4" Outside IP Thread On Tailpiece 21.27

QUARTER BEND METER COUPLINGOUTSIDE I.P. THREAD ON TAILPIECE

56F 3470 H-10892N 1" Outside IP Thread On Tailpiece 30.40


56F 4510 H-14200N 5/8" x 3/4" Copper Service Pipe Conn & Swivel Meter Nut Drilled For Wire Seal $ 55.4756F 4530 H-14200N 5/8" x 3/4" x 3/4" Copper Service Pipe Conn & Swivel Meter Nut Drilled For Wire Seal 53.89

QUARTER BEND METER COUPLINGCOPPER SERVICE PIPE CONNECTION & SWIVEL METER NUT DRILLED FOR WIRE SEAL

56F 4550 H-14200N 1" Copper Service Pipe Conn & Swivel Meter Nut Drilled For Wire Seal 69.29


56F 4610 H-14210N 5/8" x 3/4" Inside IP Threads & Swivel Meter Nut Drilled For Wire Seal $ 50.8356F 4650 H-14210N 5/8" x 3/4" x 3/4" Inside IP Threads & Swivel Meter Nut Drilled For Wire Seal 47.56

QUARTER BEND METER COUPLINGINSIDE IP THREADS & SWIVEL METER NUT DRILLED FOR WIRE SEAL

56F 4655 H-14210N 1" Inside IP Threads & Swivel Meter Nut Drilled For Wire Seal 53.41


56F 4575 H-14206N 5/8" x 3/4" x 3/4" Mueller 110 Cond Compr Conn For CTS OD Tubing & Swivel Meter Nut $ 52.5356F 4580 H-14206N 1" Mueller 110 Cond Compr Conn For CTS OD Tubing & Swivel Meter Nut 74.44

QUARTER BEND METER COUPLINGMUELLER 110 CONDUCTIVE COMPRESSION CONNECTION FOR CTS OD TUBING & SWIVEL METER NUT


56F 9500 L34-13NL 5/8" Meter Swivel Nut By Pack Joint For 3/4" Copper Or Plastic Tubing - CTS $ 39.79 *56F 9510 L34-13NL 5/8" x 3/4" Meter Swivel Nut By Pack Joint For 3/4" Copper Or Plastic Tubing - CTS 45.30 *

FORD ANGLE METER COUPLINGFOR METERING NEW OR EXISTING SERVICES • METER SWIVEL NUT BY PACK JOINT FOR 3/4" COPPER OR PLASTIC TUBING - CTS

The Ford Meter Box Company, Inc. *Price Change


56F 0050 B-24276N 11/2" Mueller 110 Cond Compr Conn For CTS OD Tubing & Meter Flange $ 365.5956F 0060 B-24276N 2" Mueller 110 Cond Compr Conn For CTS OD Tubing & Meter Flange 465.99

300TM BALL ANGLE METER STOP QUARTER TURN CHECK & LOCK WING • MUELLER 110 CONDUCTIVE COMPRESSION CONNECTION & METER FLANGE

August 7, 2014 Q-13D

WATERWORKS Q

COUPLINGS & WATER METER ACCESSORIES

COUPLING WASHERSFOR METER COUPLINGS


56F 3520 H-10893 5/8" Fibre $ .1756F 3560 H-10893 3/4" Fibre .17

HOSE COUPLINGIPS PE PIPE & COPPER FLARE


56F 3820 H-12203N 3/4" $ 61.36

56F 3580 H-10893 1" Fibre .40

56F 3610 H-10894 5/8" Leather $ .4856F 3630 H-10894 3/4" Leather .4856F 3640 H-10894 1" Leather .69

56F 3680 H-10895 5/8" Rubber $ .4856F 3710 H-10895 3/4" Rubber .4856F 3730 H-10895 1" Rubber .69

BRASS METER IDLERSSC No. Manuf No. Size Price Each

56F 3140 H-10887N 5/8" x 3/4" $ 29.33

METER INCREASERSSC No. Manuf No. Size Price Each

56F 3150 H-10888N 5/8" x 3/4" $ 30.03

METER BUSHINGSSC No. Manuf No. Size Price Each

56F 3160 H-10889N 3/4" x 1" $ 14.97

SSC No. Size Wgt. Price Each

56G 3700 Cast Iron 11/2" With Bolts & Gasket 5.00 Lbs $ 60.84

METER FLANGE PACK

56G 3710 Cast Iron 2" With Bolts & Gasket 6.25 Lbs 76.14

56G 3720 Bronze 11/2" With Bolts & Gasket 6.00 Lbs $ 147.9056G 3730 Bronze 2" With Bolts & Gasket 6.50 Lbs 180.18

SSC No. Size Wgt. Price Each

56G 5000 Cast Iron 11/2" $ 18.27

OVAL METER FLANGE

56G 5020 Cast Iron 2" 20.49

56G 5200 Brass 11/2" 1.8 Lbs $ 61.8056G 5210 Brass 2" Less Bolts & Gasket 2.2 Lbs 72.51

SSC No. Size Length Working Pressure Wgt Price Each

56I 6087 926-190-000 11/2" 31/2" Up To 150 PSI 5 LBS $ 150.37 *

DUCTILE IRON FLEXIBLE METER COUPLINGFOR JOINING PVC, COPPER & STEEL PLAIN-END PIPE TO OVAL FLANGED METERS & FLANGED VALVES & FITTINGS

56I 6092 926-250-000 2" 31/2" Up To 150 PSI 6 LBS 150.37 *

FULL-FACE FLANGE GASKETFOR WATER METER FLANGES


56G 5240 Cast Iron 11/2" $ 2.91 56G 5250 Cast Iron 2" 2.67

BOLT & NUTFOR 11/2" WATER METERS


56G 5260 Galvanized 5/8" x 21/2" $ 2.37 56G 5270 Brass 5/8" x 21/2" 24.62

BOLT & NUTFOR 2" WATER METERS


56G 5280 Zinc 3/4" x 23/4" $ 4.99 56G 5290 Brass 3/4" x 21/2" 64.48

DROP-IN FLANGE GASKETFOR WATER METER FLANGES


56G 5220 11/2" $ 2.05 56G 5230 2" 2.59

* Price Change

PS200-LB Top Lid Only With Large Pentagon Bolt & Cam Lock CALL FOR PRICE

Q-14 August 17, 2017


WATERWORKS Q

METER BOX COVERS

SPECIAL FLAT METER BOX COVER7" CENTER READING COVER WITH FORGED STRAP

SSC No. Manuf No. Tile Size Lbs Price Each

56E 0880 C-106 18" 45 Lbs $ 66.70

CAST IRON ADAPTER RINGS ADAPTER RING ALLOWS USE OF A 18" METER LID ON A 24" OR 36" PIT

SSC No. Manuf No. Size A B C D Wgt Price Each

56E 1430 MBA 1178 18" to 36" 403/8" 243/16" 22" 18" 110 Lbs 170.0056E 1400 MBA 1176 18" to 24" 269/16" 241/16" 22" 18" 25 Lbs $ 52.13

HEAVY DUTY MANHOLE RING & COVERSSC No. Manuf No. Size Price Each

56E 0310 1005 241/8" $ 485.26

1 PIECE SPECIAL FLAT METER BOX COVERRING ON BOTTOM SIDE FITS INSIDE TILE TO PREVENT SHIFTING


56E 0910 C-108 15" 27 Lbs $ 41.4056E 0960 C-109 18" 36 Lbs 54.6956E 1010 C-111 24" 70 Lbs 103.50 *

CAST IRON METER BOX COVERRING & LID WITH LARGE BOLTS • WITH LOCKING LID


56E 1210 6150-18 BL 12" x 18" 37 Lbs $ 182.21 *

CAST IRON TOUCH READER METER BOX COVERRING & LID WITH LARGE BOLTS • WITH LOCKING LID & ACCESS HOLE


56E 1350 6150-18TR BL 12" x 18" 39 Lbs $ 154.81

CAST IRON RAISED METER BOX COVERNON-LOCKING LID


56E 1300 W-1175 12" x 18" 31 Lbs $ 55.53

6150-18 TR BL

6150-18 BL

ProSource Water Products Ltd.

NON-METALLIC PLASTIC METER BOX RING & TOP LID VIRGIN POLYETHYLENE • RINGS FIT 18", 20' & 21" DIAMETER METER BOXES • LIDS FIT MOST NON-RECESSED CI RINGSLOCKING TRANSPONDER BRACKET FOR TRANSMITTER • 2 EMBEDDED MAGNETIC LOCATORS

Manuf No. Price Each

PS500-AMR-LB With Large Pentagon Bolt & Cam Lock CALL FOR PRICE

*Price Change

April 12, 2018 Q-14A

WATERWORKS Q

METER BOXES & PITS

GALVANIZED METER BOXES OR LIDS


56E 1840 Meter Lid 24" Diameter 14 Gauge 105.20 *56E 1820 Meter Box 24" Diameter x 36" Length 16 Gauge $ 172.11 *

56E 1880 Meter Lid 36" Diameter 14 Gauge 196.09 *56E 1860 Meter Box 36" Diameter x 36" Length 16 Gauge $ 276.36 *

ROUND SLOTTED WATER METER PITHIGH-DENSITY POLYETHYLENE (HDPE) • WON'T CORRODE OR CRUMBLE • PRE-CUT NOTCHES AT THE BOTTOM

SSC No. Manuf No. Size I.D. x Length Price Each

56E 1770 MP NL1 18 0002 18" x 30" Bright White For Better Readability 48.87 56E 1740 MP NL1 18 0001 18" x 24" Bright White For Better Readability $ 52.78

56E 1793 MP NL1 21 0003 20" x 36" Bright White For Better Readability $ 63.51

56E 1790 MP NL1 18 0003 18" x 36" Bright White For Better Readability 58.64

56E 1810 MP NL1 18 0003 24" x 36" Bright White For Better Readability 135.45 56E 1795 MP NL1 24 0002 24" x 30" Bright White For Better Readability $ 109.42

56E 1815 36" x 36" Near White For Easy Reading $ 395.65

FOAM INSULATION PADS FOR WATER METER PITS

SSC No. Size For Pit Size Price Each

56E 1550 3" x 25" 24" 34.4956E 1500 3" x 19" 18" $ 14.32

56E 1560 3" x 37" 36" 73.64

POLY METER BOX EXTENSIONS

SSC No. . Size Price Each

56E 1818 6" x 18" 60.63 56E 1817 3" x 18" $ 55.26

56E 1819 12" x 18" 77.27

*Price Change

PVC NOTCHED WATER METER BOX


56E 1811 24" x 36" Notched Meter Box 179.25 56E 1791 18" x 36" Notched Meter Box $ 95.34


Q-15 April 12, 2018


WATERWORKS Q

SSC No. Catalog No. Nom Size OD Range Width Lbs Pipe Price Each

56I 0230 226-035012-000 3" 3.46" - 3.70" 121/2" 15.3 STEEL PVC $ 272.18 *

56I 0300 226-040007-000 3" 3.96" - 4.25" 71/2" DUCTILE IRON & CAST IRON $ 174.06 *

226 CLAMP COUPLINGFULL CIRCLE SINGLE BAND LOW ALLOY BOLTS & NUTS

56I 0050 226-023807-000 2" 2.35" - 2.63" 71/2" 08.8 STEEL PVC DUCTILE IRON CAST IRON $ 138.06 *

56I 0260 226-037507-000 3" 3.73" - 4.00" 71/2" 09.2 DUCTILE IRON CAST IRON $ 168.05 *

56I 0866 226-086307-000 8" 8.54" - 8.94" 71/2" 13.3 STEEL PVC $ 255.18 *

56I 0060 226-023812-000 2" 2.35" - 2.63" 121/2" 14.5 STEEL PVC DUCTILE IRON CAST IRON 245.06 *

56I 0290 226-037512-000 3" 3.73" - 4.00" 121/2" 15.5 DUCTILE IRON CAST IRON 280.10 *

56I 0868 226-086312-000 8" 8.54" - 8.94" 121/2" STEEL PVC 409.14 *

56I 0070 226-023815-000 2" 2.35" - 2.63" 15" 17.5 STEEL PVC DUCTILE IRON CAST IRON 281.89 *

56I 0310 226-045007-000 4" 4.45" - 4.73" 71/2" 09.6 STEEL PVC $ 180.18 *

56I 0510 226-066307-000 6" 6.56" - 6.96" 71/2" 11.6 STEEL PVC DUCTILE IRON CAST IRON $ 215.34 *





56I 0400 226-045010-000 4" 4.45" - 4.73" 10" 13.0 STEEL PVC 251.06 *

56I 0515 226-066310-000 6" 6.56" - 6.96" 10" 15.6 STEEL PVC DUCTILE IRON CAST IRON 296.73 *

56I 0490 226-048015-000 4" 4.74" - 5.14" 15" 20.8 DUCTILE IRON CAST IRON 368.70 *








56I 0410 226-045012-000 4" 4.45" - 4.73" 121/2" 15.9 STEEL PVC 304.22 *

56I 0520 226-066312-000 6" 6.56" - 6.96" 121/2" 19.2 STEEL PVC DUCTILE IRON CAST IRON 346.98 *












*Price Change

April 12, 2018 Q-15A

SSC No. Catalog No. Nom Size OD Width Lbs Pipe Price Each

229 COLLAR LEAK CLAMP COUPLINGFULL CIRCLE SINGLE BAND

56I 0974 229-023807-000 2" 2.38" 71/2" 09 PVC $ 157.69 *56I 0977 229-035007-000 3" 3.50" 71/2" 10 PVC 180.50 *


56I 1407 238-069012-014 6" 6.84" to 7.24" 121/2" 19.2 DUCTILE IRON CAST IRON 2" NPT $ 499.07 *

238 TAPPED CLAMP COUPLINGFULL CIRCLE SINGLE BAND LOW ALLOY BOLTS & NUTS

56I 1370 238-045007-009 4" 4.45" to 4.73" 71/2" 11.4 STEEL PVC 1" CC $ 269.29 *

56I 1380 238-048007-007 4" 4.74" to 5.14" 71/2" 10.7 DUCTILE IRON CAST IRON 3/4" CC $ 275.61 *

56I 1400 238-069007-007 6" 6.84" to 7.24" 71/2" 11.9 DUCTILE IRON CAST IRON 3/4" CC $ 309.19 *

56I 1390 238-048007-009 4" 4.74" to 5.14" 71/2" 10.7 DUCTILE IRON CAST IRON 1" CC 275.61 *

56I 1405 238-069007-009 6" 6.84" to 7.24" 71/2" 11.9 DUCTILE IRON CAST IRON 1" CC 309.19 *


244 REDI-CLAMP LEAK CLAMPFULL CIRCLE

56I 1460 244-006306-000 1/2" CTS .625" 6" 0.80 COPPER $ 130.80 *

56I 1480 244-010503-000 3/4" IPS 1.05" 3" 0.85 STEEL PVC $ 62.24 *

56I 1488 244-011306-000 1" CTS 1.125" 6" 1.80 COPPER $ 131.89 *

56I 1485 244-010506-000 3/4" IPS 1.05" 6" 1.70 STEEL PVC 131.57 *

56I 1500 244-016606-000 11/4" IPS 1.66" 6" 2.00 STEEL PVC 134.17 *

56I 1475 244-008806-000 3/4" CTS .875" 6" 1.60 COPPER $ 131.21 *

56I 0980 229-045007-000 4" 4.50" 71/2" 10 PVC 203.38 *56I 0990 229-066307-000 6" 6.63" 71/2" 12 PVC 250.77 *



226 CLAMP COUPLING continued from previous pageFULL CIRCLE SINGLE BAND LOW ALLOY BOLTS & NUTS

56I 0953 226-132007-000 12" 13.10" to 13.50" 71/2" 16.6 DUCTILE IRON CAST IRON $ 361.47 *

56I 0960 226-132015-000 12" 13.10" to 13.50" 15" 29.1 DUCTILE IRON CAST IRON 722.90 *



56I 0957 226-132012-000 12" 13.10" to 13.50" 121/2" 25.3 DUCTILE IRON CAST IRON 581.76 *

56I 1470 244-008403-000 1/2" IPS .84" 3" 0.80 STEEL PVC 61.44 *

56I 1490 244-013206-000 1" IPS 1.32" 6" 1.80 STEEL PVC 132.54 *

56I 1495 244-013806-000 11/4" CTS 1.375" 6" 2.00 COPPER $ 133.66 *

*Price Change

Q-15B April 12, 2018

56I 1505 244-016306-000 11/2" CTS 1.625" 6" 2.00 COPPER $ 134.60 *

56I 1520 244-023806-000 2" IPS 2.38" 6" 3.20 STEEL PVC 140.30 *


245 REDI-CLAMP LEAK CLAMP

56I 1620 245-008403-000 1/2" .84" 3" 0.5 STEEL PVC $ 17.76 *56I 1640 245-008406-000 1/2" .84" 6" 1.0 STEEL PVC 32.77 *

56I 1660 245-010503-000 3/4" 1.05" 3" 0.6 STEEL PVC $ 18.11 *56I 1680 245-010506-000 3/4" 1.05" 6" 1.1 STEEL PVC 33.77 *

56I 1700 245-013203-000 1" 1.32" 3" 0.6 STEEL PVC $ 19.79 *56I 1720 245-013206-000 1" 1.32" 6" 1.2 STEEL PVC 35.96 *



56I 1820 245-023803-000 2" 2.38" 3" 1.1 STEEL PVC $ 23.87 *


WATERWORKS Q

56I 1860 245-023812-000 2" 2.38" 12" 4.0 STEEL PVC 87.92 *

56I 1880 245-028806-000 21/2" 2.88" 6" 2.3 STEEL PVC $ 59.68 *

56I 1900 245-035006-000 3" 3.50" 6" 2.6 STEEL PVC $ 63.21 *56I 1920 245-045006-000 4" 4.50" 6" 2.8 STEEL PVC 67.35 *

56I 1840 245-023806-000 2" 2.38" 6" 2.2 STEEL PVC 43.23 *


244 REDI-CLAMP LEAK CLAMP continued from previous pageFULL CIRCLE

56I 1510 244-019006-000 11/2" IPS 1.90" 6" 2.00 STEEL PVC 136.76 *

56I 1515 244-021306-000 2" CTS 2.125" 6" 3.20 COPPER $ 138.22 *

SSC No. Catalog No. Nom Size OD Range Lbs Pipe Price Each

274 BELL JOINT LEAK CLAMP

56I 2200 274-0250-000 2" 2.50" 05.8 C-900 PVC DUCTILE IRON CAST IRON $ 356.39 *

56I 2225 274-1110-000 10" 11.10" - 11.40" 36.5 C-900 PVC DUCTILE IRON CAST IRON $ 701.65 *

56I 2220 274-0690-000 6" 6.90" - 7.10" 22.9 C-900 PVC DUCTILE IRON CAST IRON $ 404.12 *

56I 2210 274-0480-000 4" 4.80" - 5.00" 19.0 C-900 PVC DUCTILE IRON CAST IRON 366.95 *



*Price Change

April 12, 2018 Q-15C



311 IRON 1 STRAP SERVICE SADDLE

56I 2730 311-045507-000 3"/4" 3.74" - 4.55" 3/4" CC 2.9 4" STEEL 3" CAST IRON $ 50.64 *

56I 2660 311-025607-000 2" 2.35" - 2.56" 3/4" CC 1.6 STEEL DUCTILE IRON CAST IRON 41.56 *56I 2650 311-025606-000 2" 2.35" - 2.56" 3/4" NPT STEEL DUCTILE IRON CAST IRON $ 41.56 *

56I 2715 311-025608-000 2" 2.35" - 2.56" 1" NPT STEEL DUCTILE IRON CAST IRON 41.56 *

56I 2860 311-056308-000 4" 4.74" - 5.63" 1" NPT 3.2 DUCTILE IRON CAST IRON 54.91 *

56I 2750 311-056306-000 4" 4.74" - 5.63" 3/4" NPT 3.2 DUCTILE IRON CAST IRON $ 54.91 *

56I 2754 311-056309-000 4" 4.74" - 5.63" 1" CC DUCTILE IRON CAST IRON $ 54.91 *

56I 2763 311-056314-000 4" 4.74" - 5.63" 2" NPT 4.8 DUCTILE IRON CAST IRON $ 74.81 *

56I 3010 311-076007-000 6" 6.84" - 7.60" 3/4" CC STEEL CAST IRON $ 63.77 *56I 3020 311-076009-000 6" 6.84" - 7.60" 1" CC 4.6 STEEL CAST IRON 63.77 *


56I 3060 313-025607-000 2" 2.35" - 2.56" 3/4" CC 2.5 STEEL CAST IRON $ 56.71 *

56I 3160 313-056307-000 4" 4.74" - 5.63" 3/4" CC 6.1 DUCTILE IRON CAST IRON $ 79.61 *

56I 3217 313-051415-000 4" 4.74" - 5.14" 2" CC 8.6 DUCTILE IRON CAST IRON 102.97 *




56I 3440 313-076009-000 6" 6.84" - 7.60" 1" CC 7.0 DUCTILE IRON CAST IRON 98.04 *56I 3430 313-076008-000 6" 6.84" - 7.60" 1" NPT 7.0 DUCTILE IRON CAST IRON $ 98.04 *

56I 3460 313-101007-000 8" 8.54" - 10.10" 3/4" CC 8.0 STEEL DUCTILE IRON CAST IRON $ 107.05 *

56I 3564 313-101014-000 8" 8.54" - 10.10" 2" NPT 8.9 STEEL DUCTILE IRON CAST IRON $ 133.53 *

56I 3475 313-101012-000 8" 8.54" - 10.10" 11/2" NPT STEEL DUCTILE IRON CAST IRON $ 133.53 *

56I 3465 313-101009-000 8" 8.54" - 10.10" 1" CC 8.0 STEEL DUCTILE IRON CAST IRON 107.05 *

56I 3490 313-101013-000 8" 8.54" - 10.10" 11/2" CC STEEL DUCTILE IRON CAST IRON 133.53 *

56I 3567 313-101015-000 8" 8.54" - 10.10" 2" CC 8.9 STEEL DUCTILE IRON CAST IRON 133.53 *





313 IRON 2 STRAP SERVICE SADDLE

*Price Change

Q-15D April 12, 2018


WATERWORKS Q

SSC No. Catalog No. Nom Size OD Range Tap Lbs Pipe Price Each

315 1 STRAP SERVICE SADDLE NYLON COATED STAINLESS STEEL


56I 3576 315-045507-000 3"/4" 3.74" - 4.55" 3/4" CC 2.9 4" STEEL 3" CAST IRON $ 94.26 *


56I 3579 315-066313-000 5"/6" 5.94" - 6.70" 11/2" CC 5.0 STEEL PVC $ 129.74 *


56I 3588 315-076012-000 6" 6.84" - 7.60" 11/2" NPT 5.5 DUCTILE IRON CAST IRON $ 131.48 *


56I 3595 317-066307-000 6" 5.94" - 6.70" 3/4" CC 6.0 STEEL PVC $ 187.29 *

56I 3593 317-045014-000 4" 4.40" - 4.50" 2" NPT 7.5 4" STEEL $ 192.89 *

56I 3597 317-066314-000 6" 5.94" - 6.70" 2" NPT 9.2 STEEL PVC $ 220.94 *

56I 3600 317-101009-000 8" 8.54" - 10.10" 1" CC 8.0 STEEL PVC DUCTILE & CAST IRON $ 221.29 *

56I 3598 317-066315-000 6" 5.94" - 6.70" 2" CC 9.2 STEEL PVC 220.94 *

SSC No. Catalog No. Nom Size OD Range Tap Lbs Pipe Price Each

317 2 STRAP SERVICE SADDLE NYLON COATED STAINLESS STEEL

SSC No. Catalog No. Nom Size OD Sleeve Thick. x lgth Lbs Pipe Price Each

411 STEEL COUPLING

56I 4425 411-066302-003 6" 6.63" 1/4" x 7" 22.8 STEEL $ 320.25 *56I 4440 411-086302-003 8" 8.63" 1/4" x 7" 28.2 STEEL 370.92 *

56I 4060 411-010501-003 3/4" 1.05" .120 x 41/2" 02.5 STEEL $ 71.87 *

56I 4260 411-023801-003 2" 2.38" .156 x 5" 04.9 STEEL $ 105.34 *

56I 4360 411-035001-003 3" 3.50" .203 x 5" 10.5 STEEL $ 170.48 *

56I 4160 411-016601-003 11/4" 1.66" .148 x 5" 04.0 STEEL 77.87 *

56I 4410 411-045001-003 4" 4.50" .134 x 5" 12.3 STEEL $ 215.38 *

56I 4110 411-013201-003 1" 1.32" .134 x 5" 03.3 STEEL $ 74.36 *

56I 4210 411-019001-003 11/2" 1.90" .148 x 5" 04.3 STEEL 92.97 *

56I 4415 411-045010-003 4" 4.50" .203 x 12" 20.9 STEEL 381.34 *

56I 4310 411-028801-003 21/2" 2.88" .203 x 5" 12.9 STEEL 162.77 *

*Price Change


April 12, 2018 Q-15E


56I 4830 21346 8" IPS Flange For 441 Coupling $ 51.01 *

56I 4840 21359 12" IPS Flange For 441 Coupling 76.65 *56I 4835 21355 10" IPS Flange For 441 Coupling 61.11 *

56I 4855 33806 8" IPS Gasket For 441 Coupling $ 42.79 *

56I 4865 33817 12" IPS Flange For 441 Coupling 65.39 *56I 4860 33813 10" IPS Flange For 441 Coupling 58.63 *

SSC No. Catalog No. Nom Size OD Range Length Lbs Pipe Price Each

441 OMNI CAST COUPLINGLIMITED RANGE • 461 FLEXI-BLUE EPOXY COATED INSIDE & OUT

56I 4660 441-0263-900 2" 2.34" - 2.63" 4" 08.7 DUCTILE IRON CAST IRON $ 100.17 *






SSC No. Catalog No. Nom Size Overall Range Sleeve Length Lbs Pipe Price Each

421 TOP BOLT® 2 BOLT COUPLING SYSTEMCOUPLING & 304 STAINLESS STEEL HARDWARE COATED IN FLEXI-COAT® FUSION BONDED EPOXY

56I 4460 421-04460560-031 4" 4.46" - 5.60" 6" 19.0 $ 412.47 *

56I 4470 421-08540985-031 8" 8.54" - 9.85" 8" 33.0 616.75 *56I 4465 421-06560760-031 6" 6.56" - 7.60" 8" 27.0 $ 544.60 *

ASBESTOS CEMENT STEEL PVC DUCTILE IRON COPPER TUBE SIZES


461 QUANTUM CAST COUPLINGLIMITED RANGE • 461 FLEXI-BLUE EPOXY COATED INSIDE & OUT

56I 4900 461-04460560-000 4" 4.46" - 5.60" 5.5" 24.0 DUCTILE IRON CAST IRON $ 265.89 *

56I 4920 461-08540985-000 8" 8.54" - 9.85" 6.0" 39.4 DUCTILE IRON CAST IRON 437.44 *56I 4910 461-06540765-000 6" 6.54" - 7.65" 6.0" 33.5 DUCTILE IRON CAST IRON 374.91 *


462 QUANTUM CAST COUPLINGLIMITED RANGE • 461 FLEXI-BLUE EPOXY COATED INSIDE & OUT


56I 4978 462-08540985-000 8" 8.54" - 9.85" 12" 39.4 DUCTILE IRON CAST IRON 768.81 *56I 4965 462-06540765-000 6" 6.54" - 7.65" 12" 33.5 DUCTILE IRON CAST IRON 555.09 *

*Price Change

Q-15F April 12, 2018


WATERWORKS Q

SSC No. Catalog No. Nom Size OD Length Lbs Pipe Price Each

525 COMPRESSION COUPLING

56I 6030 525-08400-003 1/2" 0.84" 6" 20.1 STEEL PVC $ 31.41

56I 6070 525-19000-003 11/2" 1.90" 6" 27.2 STEEL PVC 64.76 *

56I 6050 525-13200-003 1" 1.32" 6" 21.9 STEEL PVC $ 28.63

56I 6040 525-10500-003 3/4" 1.05" 6" 23.3 STEEL PVC 44.79

56I 6060 525-16600-003 11/4" 1.66" 6" 20.9 STEEL PVC 53.69

56I 6080 525-23800-003 2" 2.38" 6" 43.5 STEEL PVC $ 75.29

SSC No. Catalog No. Nom Size* OD Range Length Lbs Pipe Price Each

663 TAPPING SLEEVE FOR C900HEAVY GAUGE STAINLESS STEEL • FOR TAPPING PIPE WITH 4" THRU 12" OUTLETS

56I 7090 663-04800400-200 4" x 4" 4.46" - 4.86" 15" 32 DUCTILE IRON CAST IRON $ 1,279.68 *


56I 7102 663-06900600-200 6" x 4" 6.84" - 7.30" 15" 38 DUCTILE IRON CAST IRON $ 1,324.26 *56I 7100 663-06900600-200 6" x 6" 6.84" - 7.30" 15" 42 DUCTILE IRON CAST IRON 1,418.73 *

56I 7115 663-09050800-200 8" x 8" 8.99" - 9.45" 20" 63 DUCTILE IRON CAST IRON 1,893.70 *56I 7110 663-09050600-000 8" x 6" 8.99" - 9.45" 15" 47 DUCTILE IRON CAST IRON 1,478.70 *

*Nominal Size Of Pipe X Flanged Outlet





SSC No. Catalog No. Nom Size OD Range Lbs Pipe Price Each

56I 6085 912-90135012-000 12" 13.20" - 13.50" 80 DUCTILE IRON CAST IRON $ 1,406.11 *

56I 6083 912-90072006-000 6" 6.90" - 7.20" 29 DUCTILE IRON CAST IRON 508.80 *56I 6084 912-90094008-000 8" 9.05" - 9.40" 40 DUCTILE IRON CAST IRON 698.41 *

SSC No. Catalog No. Outlet/Pipe OD Lbs Price Each

56I 6092 926-250-000 2" IP/CI 2.375" IP 2.5" CI 6 $ 150.37 *

56I 6087 926-190-000 11/2" IP 1.900" 5 $ 150.37 *

56I 6082 912-90051004-000 4" 4.80" - 5.10" 22 DUCTILE IRON CAST IRON $ 398.46 *

912 OMNI FLANGED COUPLING ADAPTERHEAVY DUTY DUCTILE IRON • FOR JOINING PLAIN END PIPE TO FLANGED VALVES & FITTINGS

926 FLEXIBLE FLANGED METER ADAPTERFOR JOINING PLAIN END PIPE TO OVAL FLANGED WATER METERS OR FLANGED VALVES & FITTINGS

*Price Change

April 12, 2018 Q-15G

WATERWORKS Q

BRONZE SERVICE CLAMP WITH INTEGRAL HINGEFOR IRON PIPE SIZE PVC PLASTIC PIPE AND C900 PVC PIPE

SSC No. Catalog No. Nom Size OD Tap Lbs Price Each

56F 3890 S-13420 2" 2.375" 3/4" CC 1.5 $ 33.4556F 3892 S-13420 2" 2.375" 1" CC 2.0 33.45

56F 3895 S-13425 3" 3.500" 3/4" CC 1.9 $ 44.15

56F 3930 S-13428 4" 4.500" 3/4" CC 2.3 $ 51.92

56F 3936 H-13428 4" 4.500" 2" CC 3.0 111.8256F 3933 S-13428 4" 4.500" 1" CC 2.6 51.93

56F 3940 S-13431 6" 6.625" 3/4" CC 2.9 $ 77.4856F 3950 S-13431 6" 6.625" 1" CC 2.9 77.48

56F 3954 S-13433 8" 8.625" 3/4" CC 4.0 $ 106.4056F 3955 S-13433 8" 8.625" 1" CC 4.2 106.40

56F 3956 H-13440 4" 4.800" 3/4" CC For C900 2.3 $ 56.72

56F 3961 H-13442 8" 9.050" 3/4" CC For C900 3.2 $ 108.41

56F 3957 H-13440 4" 4.800" 1" CC For C900 2.6 56.72

56F 3962 H-13442 8" 9.050" 1" CC For C900 4.2 108.41

56F 3958 H-13441 6" 6.900" 3/4" CC For C900 3.2 $ 77.48

56F 3960 H-13441 6" 6.900" 2" CC For C900 3.7 146.1656F 3959 H-13441 6" 6.900" 1" CC For C900 2.9 77.48

56F 3965 S-13470 2" 2.375" 3/4" IP 1.5 $ 33.4556F 3970 S-13470 2" 2.375" 1" IP 1.8 33.45

56F 3980 S-13475 3" 3.500" 1" IP 2.0 $ 44.15

56F 4005 S-13478 4" 4.500" 3/4" IP 2.7 $ 51.93

56F 4013 H-13478 4" 4.500" 2" IP 3.0 111.8256F 4010 S-13478 4" 4.500" 1" IP 2.8 51.93

56F 4015 S-13481 6" 6.625" 1" IP 3.0 $ 77.4856F 4017 H-13481 6" 6.625" 2" IP 3.7 146.20

SSC No. Catalog No. Nom Size OD Tubing Size Lbs Price Each

000 ADAPTER GASKETADAPTS STEEL SIZE COUPLINGS TO COPPER TUBING SIZE FOR COUPLINGS 411, 521 & 522

56I 6100 000-30639-075 1/2" 0.84" 0.63 $ 17.59 *

56I 6140 000-30009-075 11/2" 1.90" 1.63 28.83 *

56I 6120 000-30641-075 1" 1.32" 1.13 $ 19.24 *

56I 6110 000-30640-075 3/4" 1.05" 0.88 18.27 *

56I 6130 000-30642-075 11/4" 1.66" 1.38 21.92 *

56I 6150 000-30092-075 2" 2.38" 2.13 $ 29.63 *

S-SERIES

H-SERIES

*Price Change

Q-16 April 12, 2018


WATERWORKS Q

WATERWORKS

SSC No. Manuf No. Size Type Price Each

SSC No. Manuf No. Description Price Each

56J 4930 5261-17-0713 2" x 1" 17 $ 40.13

56K 2000 L500 Handle Only $ 111.63

56J 4935 5261-19-0713 3" x 1" 19 54.43 *

56K 3550 100-R Repair kit 12.14

56J 4937 5261-21-0713 4" x 1" 21 56.73

56K 2010 L17 11/16" Socket 50.08

56J 4939 5261-24-0713 6" x 1" 24 70.66 *

56K 2020 L20 11/4" Socket 50.08

LOWELL WRENCH WITH QUICK RELEASE HANDLE•5/8" FOR FULL CIRCLE CLAMP - 11/16"HEXSOCKET•3/4" FOR MJ BOLTS - 11/4" HEX SOCKET

STELLER UNDERGROUND CLAMPSFOR CAST IRON PIPE. 1/2" X 2" FLAT BAR STOCK.


FASTTAP TAPPING SADDLESSOLVENT WELD FOR PVC MAINS. WIDE 6" BASE FOR STRENGTH & EXTRA GRIPPING POWER ON PIPE. SIX 5/16" BOLTS FOR SECURITY. VERSATILE & CONSISTANT. 3/4" FEMALE SLIP X 1" MALE SLIP.

SSC No. Manuf No. Size Type Adapter Price Each

56K 0250 3975-S00 3/4" Flare Adapter $ 389.3656K 0280 3901-S00 1" Flare Adapter 419.06

POWERSEAL VEGA DRILLSCOMPLETEUNITSFORIPSTHINWALLPLASTICPIPE•SPEEDHANDLE• DRILL, DRIVE MECHANISM & ADAPTER

56J 4460 4" $ 45.00 *

56J 4560 8" 54.0056J 4510 6" 48.00

56J 4580 10" 60.00 *56J 4590 12" 69.00

EXTRA WASHERS FOR STELLER

CLAMPS ARE AVAILABLE

Call Us at (785)823-2221

For Prices & Info.


56K 3575 364-9982 Wrench With Blue Grip $ 122.66

HEAVY DUTY DOUBLE SOCKET RATCHET WRENCH•11/16" SOCKET - 5/8"HEAVYHEXNUT•11/4" SOCKET - 3/4" HEAVY HEX NUT

SSC No. Manuf No. Tensile Yield Price Each

56J 4410 60,000 45,000 $ 6.93 *

STELLER "DUC-LUG"POSITIVE LOCKING BETWEEN MECHANICAL JOINTS. CAST IN DUCTILE IRON.

SSC No. Manuf No. Size Type Wgt. Price Each

56K 0400 85 3/4" to 1" 75 Lbs $ 417.00 *

SOFT COPPER PIPE SHUT OFF TOOLSHUTS-OFF, HOLDS & RESTORES FLOW QUICLY & EASILY. SWING-OUT DESIGN FOR QUICK REPAIRS. INCLUDES RATCHET, CARRYING CASE & HOLDING CLAMP.

*Price Change

August 17, 2017 Q-16A

WATERWORKS

SSC No. Manuf No. Inlet Outlet Price Each

56K 4000 AR-8 3/4" 1/2" $ 133.61

AR-8 AIR RELEASE VALVE300PSIGMAX•PIPETHREADINLET&OUTLET•CASTIRONBODY•STAINLESSSTEELFLOAT

SSC No. Manuf No. Inlet Outlet Price Each

56K 4015 AL10-D 1" 1" $ 488.81

AL10-D AIR & VACUUM VALVECASTIRONBODY•STAINLESSSTEELFLOAT•PIPETHREADINLET&OUTLET

SSC No. Manuf No. Color Price Each

56K 5000 J40-380 White For General Purposes $ 13.55

MARKING PAINT16OUNCECANWITHINVERTEDTIP•WATERBASEFORMULA•FAST-DRYING&NON-CLOGGING•COLORCODED

56K 5020 J40-383 Blue For Water & Irrigation Purposes 13.14 56K 5040 J40-384 Green For Sewer & Associated Lines 13.55

SSC No. Message Size Price Each

56K 0200 CAUTION WATER LINE BELOW 2" x 1000' $ 38.67 *

DETECTABLE BLUE WATER LINE CAUTION TAPE

56K 0220 CAUTION WATER LINE BELOW 3" x 1000' 58.67 *


56K 0230 CAUTION 3" x 1000' $ 18.67 *

NON-DETECTABLE YELLOW BARRICADE CAUTION TAPE

SSC No. Size Price Each Bundle

56K 3000 P4521G737 GREEN 4" x 5" Bundle Of 100 $ 23.89

SURVEY MARKING FLAGS


56K 0210 CAUTION SEWER LINE BELOW 2" x 1000' $ 38.67 *

DETECTABLE GREEN SEWER LINE CAUTION TAPE

* Price Change ** New Product

56K 3010 SFB BLUE 4" x 5" Bundle Of 100 23.89 56K 3020 SFY YELLOW 4" x 5" Bundle Of 100 23.89 56K 3030 SFW WHITE 4" x 5" Bundle Of 100 23.89 56K 3040 SFR RED 4" x 5" Bundle Of 100 23.89


WATERWORKS Q

56D 4000 93-D 36" to 48" Tyler-USA 147046 32 Lbs $ 51.51 *

Q-17 August 17, 2017


WATERWORKS Q

VALVE, SERVICE BOXES & ACCESSORIES

SERVICE BOXES WITH LID MARKED "WATER"

SERVICE BOX TOP SECTION MARKED "WATER"

EXTENSION TYPE CURB BOX WITH ARCH PATTERN BASECAST IRON •WITHSTATIONARYROD•ONEPIECELID

SERVICE BOXES WITH 21/2" SHAFT

TOP BOTTOM Total SSC No. Manuf No. Extension Lgth. Wgt. Lgth. Wgt. Wgt. Price Each


56F 1410 H-10314 31/2' $ 60.34 *56F 1440 H-10314 4' 63.91 *

56D 1360 91-C/6500 24" to 33" 15" 11 Lbs 21" 9 Lbs 20 Lbs $ 39.00 *

56D 1460 92-D/6500 30" to 42" 18" 13 Lbs 27" 11 Lbs 24 Lbs $ 52.53

56D 1635 18-T 18" Fits 92-D Service Box 13 Lbs $ 25.7556D 1640 24-T 24" Fits 93-E Service Box 17 Lbs 36.05

56D 1510 93-D/6500 36" to 48" 18" 13 Lbs 33" 13 Lbs 26 Lbs 56.00

56D 1570 95-E/6500 41" to 64" 30" 18 Lbs 39" 18 Lbs 36 Lbs 60.0056D 1560 93-E/6500 36" to 54" 24" 17 Lbs 33" 13 Lbs 30 Lbs $ 46.00

STEEL SHUT-OFF ROD 1 END FLATTENED LIKE A CHISEL & OTHER END IS POINTED FOR DIGGING ICE OR DIRT AWAY FROM LID OF BOX


56F 1510 H-10321 4' Fits Stops & Valves to 2" In Size $ 76.99 *56F 1530 H-10321 6' Fits Stops & Valves to 2" In Size 77.54 *

STEEL CURB BOX KEY CURVED POINT END FOR DIGGING ICE OR DIRT AWAY FROM LID OF BOX & SPANNER WRENCH END FOR REMOVING LIDS


56F 1590 H-10322 4' With Crossbar Handle $ 50.94 *

CAST IRON CURB BOX REPAIR LIDSTAINLESS STEEL STANDARD PENTAGON SCREW•"WATER"INRAISEDLETTERS•HEAVILY CONSTRUCTED OF GRAY IRON


56F 1650 H-10374 21/2" For Old Style Buffalo Type Curb Boxes $ 19.03

ENLARGED BASE FOR 2" CURB STOP56D 1660 6" Height Increase 10 Lbs $ 14.00

* Price Change ** New Product

56D 4100 95-E 41" to 64" Tyler-USA 147251 45 Lbs $ 82.72 *

REDUCED PRESSURE BACKFLOW PREVENTERSERIES 909SERIES 909S-QT

FORD PACK JOINT COUPLINGBOTH ENDS PACK JOINTS. FOR IRON, COPPER OR PLASTIC.

CALL SALINA SUPPLY COMPANY AT (785) 823-2221 FOR INFORMATION & PRICES ON THE FOLLOWING:

August 17, 2017 Q-17A

STANDARD MALLEABLE IRON PENTAGON KEY1 END IS POINTED FOR DIGGING ICE OR DIRT AWAY FROM LID OF BOX & OTHER END IS A HAMMER HEAD


56F 1620 H-10323 Fits Standard Water Works Pentagon $ 6.99

PENTAGON KEY WITH LIFTING LUG


56F 2970 H-10821 Fits Mueller Pentagon Head $ 13.84

MULTIPLE WRENCH1STANDARDPENTAGON•1CHISEL•FOR MUELLER PENTAGON & STANDARD WATER WORKS PENTAGON HEADS


56F 2950 H-10820 Fits Both Standard Water Works & Mueller Pentagons $ 39.97 *

4' STEEL PROBING ROD WITH BALL POINTSTEELSHAFT•CARBONSTEELBALLPOINTWILLNOTPUNCTURESOFTPIPE•VINYLHANDLEFORCOMFORT


56K 5500 P27-040 4' $ 39.02 *

METER BOX HAND PUMPALL PLASTIC • SELF PRIMING • SELF LUBRICATING • EASY CLEANING• WILL NOT CORRODE

SSC No. Manuf No. Strokes/Gallon Diameter Length Hose Length Price Each

56K 6000 136PF-6 4 13/4" 36" 72" $ 62.04

VALVE, SERVICE & ROADWAY BOX ACCESSORIES FORD


WATERWORKS Q

WATERWORKS Q

Q-18 August 17, 2017

GAS CHLORINATORS * Price Change

REGAL 210 GAS CHLORINATORS MODELS WITH 10 PPD METERING TUBE & A-930 HIGH/LOW EJECTOR WITH 13A NOZZLEREGAL™ GAS CHLORINATOR IS USED TO CHLORINATE WATER, WASTEWATER & INDUSTRIAL PROCESS WATER WITH GAS CHLORINE. THE SIMPLE, EFFICIENT DESIGN HAS MADE REGAL™ GAS CHLORINATORS THE INDUSTRY STANDARD. BUILT WITH HEAVY DUTY CORROSION RESISTANT PARTS, REGAL™ CHLORINATORS PROVIDE SAFE, LONG-LASTING SERVICE.


56K 7010 210-1 Chlorinator With Remote Reader Panel 3,163.73 *56K 7000 210 Chlorinator $ 2,620.05 *

56K 7030 A-930 High/Low Dual Check Ejector With Ball Check & 4A Nozzle 910.02 *56K 7020 A-930 High/Low Dual Check Ejector With Ball Check & 13A Nozzle $ 910.02 *

56K 7050 E-234 13A Nozzle $ 363.65 *

56K 7040 E-250 Ejector Check Valve $ 36.21 *

56K 7070 VT-1 3/8" OD (1/4" I.D.) X 25 Feet Vacuum Tubing 74.78 *56K 7060 VT-1 3/8" OD (1/4" I.D.) X 50 Feet Vacuum Tubing $ 149.55 *

56K 7090 G-201 Lead Gasket $ 3.94 *

56K 7080 Y-275 Inlet Filter Up To 250 PPD $ 25.19 *

56K 7120 S-417 Ball Seal O-Ring 12.59 *56K 7110 S-405 Check Valve Seat O-Ring/Smart Valve O-Ring (7124) (7003 Assembly) $ 7.87

56K 7140 RK-200 Repair Kit For 210 Vacuum Regulator Up To 250 PPD $ 182.82 *

56K 7130 Z-250 3/8" Tube Fitting With Cap (Chlorine & Ammonia) $ 12.59

56K 7160 RK-900LOW Repair Kit For A-921, A-923 & A-926 Ejectors 83.23 *56K 7150 SPK-4 Ejector Spare Parts Kit (A-920) $ 58.25 *

56K 7170 Ejector Repair Kit (Includes RK-900LO, S-405, S-417 & E-556) 129.88 *


pipe outside diameter guide - salina supply … · june 7, 2018 q-1 pipe outside diameter guide -...

Documents