pipe support systems, pipe hangers & ss floor ... - aqua...

PiPe suPPort systems, PiPe hangers &

ss floor drains

2 3

sPrinkler hangerProfile

Product technical descriPtion:

• Made with Mild steel (Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)

• For use in fire fighting and sprinkler applications

• One-piece design allows quick and easy installation of sprinkler pipes

• Ideal for suspension using Threaded pins and Threaded rods

• Simple height adjustment using the knurled nut

• Knurled nut secured by locking hook against falling out

• Mounting without any tools

• Locking device allows easy premounting

• Adjustable in height

• Designed to meet MSS-SP58, type - 10

• Electro galvanized as per ASTM B 633 Standards

Product Code Size (Inches) Diameter

(mm) (A) Rod size

(mm)Total (H)

Height (mm)

Safe Work-ing Load

(Kg)SE-SC 01 3/4" 28 10 61 200SE-SC 02 1" 35 10 68 200SE-SC 03 1 1/4" 42 10 75 200SE-SC 04 1 1/2" 48 10 81 200SE-SC 05 2" 60 10 100 200SE-SC 06 2 1/2" 73 10 120 450SE-SC 07 3" 89 10 135 450SE-SC 08 3 1/2" 105 10 150 450SE-SC 09 4" 115 10 165 500SE-SC 10 5" 140 12 195 550SE-SC 11 6" 168 12 230 700SE-SC 12 8" 219 12 290 700SE-SC 13 10" 273 12 315 700

measurements are subject to 5% tolerance.

aBout us:With over two decades of experience Aqua Arab Trading Co is a leading exporter and reseller of Hard-ware solutions and “Plumbing & sanitary fixtures” in the UAE. Ever since we incorporated a presence in the UAE in 2001, Aqua Arab Trading has focused on a relentless pursuit of customer satisfaction and has nurtured a reputation for delivering the highest quality at the lowest prices. Currently we operate out of our showroom & a branch office Sharjah supported by a dedicated wholesale office & Dispatch Department at the Sharjah Industrial Area.

Aqua Arab Trading offers an extensive array of Hardware solutions including an end-to-end portfolio of plumbing and sanitary fixtures, Electrical Fittings, Hardware Tools not to mention other Fixtures & Fittings requirements for the construction industry. Customer satisfaction is at the crux of every transac-tion we perform, be it at the individual consumer level or broader engagements we handle as a trading establishment with MEP contractors.

We cater to customers of all sizes complemented by a wide range of products & brands suited to every budget. Our commitment to customer satisfaction is further reflected in the value added services we provide to customers be it consultative services or logistical support. We enable customers to leverage our extensive experience and in-house experts for developing proposals tailored to their budgetary requirements.

our Vision – We aspire to become the leading provider and the trusted name for end to end building material requirements of clients in the Middle East.

our mission – We seek to delight our customers in every transaction and focus on this goal every day and every day we renew our promise to bring this spirit to everything we do.

lines of Businessreseller Business – One stop destination plumbing and sanitary fixtures and fittings and a range of other building materials for customers of all sizes in UAE. Aqua Arab represents some of the most reputed brands in the industry and also offers aligned services including logistical support for consigning and transportation.

trading and distriBution- Given our longstanding relationships and goodwill in the market, Aqua Arab has emerged as a partner of choice for some of the leading hardware brands with numerous exclusive and non-exclusive distribution agreements for the United Arab Emirates.

exPorts and re-exPorts – For large customers in the Middle East and beyond, we provide specialized sourcing and export services. We have a proven track record of engaging with large contracting companies, trading establishments and resellers in Middle East, Africa and Asian markets.

4 5

PiPe hanger

sPecification taBle:

Product Code

Size Inches D (mm) Range

(mm)Dimensions

Break Load(Kg)

Safe Load(Kg)

A B C DSE-NC 01 3/8” 15 15-19 59 20 23 30 600 200

SE-NC 02 1/2” 22 20-25 66 20 26 37 600 200SE-NC 03 3/4” 28 26-30 72 20 29 43 600 200SE-NC 04 1” 35 32-36 79 20 33 50 600 200SE-NC 05 1.1/4” 42 38-43 86 20 36 57 600 200SE-NC 06 1.1/2” 48 47-51 92 20 39 63 600 200SE-NC 07 - 54 53-58 98 20 42 69 600 200SE-NC 08 2” 60 60-64 104 20 45 75 600 200SE-NC 09 - 63 63-66 108 20 47 72 600 200SE-NC 10 - 70 68-72 114 20 50 85 600 200SE-NC 11 2.1/2” 75 74-80 119 20 53 90 600 200SE-NC 12 - 83 81-86 127 20 57 98 600 200SE-NC 13 3” 90 87-92 134 20 60 105 600 200SE-NC 14 3.1/2” 100 99-105 144 20 65 115 600 200SE-NC 15 - 110 107-112 164 20 70 125 600 200SE-NC 16 4” 115 113-118 159 20 73 130 600 200SE-NC 17 - 125 125-130 169 20 78 140 600 200SE-NC 18 - 133 131-137 177 20 82 148 600 200SE-NC 19 5” 140 138-142 184 20 85 155 900 300SE-NC 20 - 150 148-153 194 20 90 165 900 300SE-NC 21 - 160 159-166 204 25 95 175 900 300SE-NC 22 6” 168 168-172 212 25 99 183 900 300SE-NC 23 8” 200 200-212 244 25 115 215 900 300SE-NC 24 - 220 215-220 264 25 125 235 900 300SE-NC 25 10” 250 269-274 294 25 140 265 900 300SE-NC 26 12” 315 313-318 359 25 173 330 900 300

measurements are subject to 5% tolerance

PiPe hanger

Product technical descriPtion:• Made with Mild steel (Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316) • Horizontal, vertical and suspended installations. Steel, copper and PVC pipes• Welded Nut M8/M10 with option of M10/M12• High - Srength round welded connecting nuts • Safe and Break Loads as per Chart • Side Screw: 6 x 20 – Phillip head with vicer • M6 Side Nuts can be provided on request • The two locking screws allow adjustment to accommodate a greater variation in pipe diameter • Fastener screws with captive washer • Can be used as a pipe anchor point• Suitable for installations without vibration control requirements • Electro galvanized as per ASTM B 633 Standards ( Hot dip galvanized if required )

model selection of Plain hangers for different tyPes of PiPes:

Product codeSteel (SCH 40)

UPVC / PE ABSInch mm

SE-NC 01 - - - -SE-NC 02 1/2” 22 20 DN15 (21.4)SE-NC 03 3/4” 28 25 DN20 (26.8)

SE-NC 04 1” 35 32,38 DN25 (33.6)SE-NC 05 1.1/4” 42 40,43 DN32 (42.3)SE-NC 06 1.1/2” 48 45 DN40 (48.3)SE-NC 07 - - 54 -SE-NC 08 2” 60 60 DN50 (60.4)SE-NC 09 - - - -SE-NC 10 - - 70 -SE-NC 11 2.1/2” 75 75 DN65 (75.4)SE-NC 12 - - 83 -SE-NC 13 3” 90 90 -SE-NC 14 - - 102 DN80 (88.9)SE-NC 15 - - 110 -SE-NC 16 4” 115 115 DN100 (114.3)SE-NC 17 - - 125 -SE-NC 18 - - 135 -SE-NC 19 5” 140 140 DN125 (21.4)SE-NC 20 - - 152 -SE-NC 21 - - 160 -SE-NC 22 6” 168 - DN150 (168.3)SE-NC 23 - - 200 -SE-NC 24 8” 219 220,225 DN200 (225.0)SE-NC 25 - - 250 DN225 (250.4)SE-NC 26 - - - DN300 (315.5)

6 7

sPecification taBle:

Product technical descriPtion:• Made with Mild steel (Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)• Horizontal, vertical and suspended installations. Steel, copper and PVC pipes • Welded Nut M8/M10 with option of M10/M12 • Connection thread with M8/M10 dual-tapped boss• Safe and Break Loads as per Chart • Side Screw: 6 x 20 – Phillip head with vicer • M6 Side Nuts can be provided on request • High rigidity due to reinforcing rib • The two locking screws allow adjustment to accommodate a greater variation in pipe diameter • Fastener screws with captive washer • With highly elastic vibration control lining • Vibration control tested • Electro galvanized as per ASTM B 633 Standards• EPDM Lining rubber for sound reduction. Heat Resistance more then 120° Centigrade

code selection of lined PiPe hangers for different tyPes of PiPes:

Product codeCop-per mm

Steel (SCH 40) UPVC /

PE ABSInch mm

SE-NCL 01 15.18 - 16 - -SE-NCL 02 22 1/2” 22 20 DN15 (21.4)SE-NCL 03 24.28 3/4” 28 25 DN20 (26.8)SE-NCL 04 35 1” 35 32,38 DN25 (33.6)SE-NCL 05 42 1.1/4” 42 40,43 DN32 (42.3)SE-NCL 06 - 1.1/2” 48 45 DN40 (48.3)SE-NCL 07 54 - - 54 -SE-NCL 08 64 2” 60 60 DN50 (60.4)SE-NCL 09 - - - - -SE-NCL 10 67,70 - - 70 -SE-NCL 11 76 2.1/2” 75 75 DN65 (75.4)SE-NCL 12 80 - - 83 -SE-NCL 13 - 3” 90 90 -SE-NCL 14 102,105 - - 102 DN80 (88.9)SE-NCL 15 108 - - 110 -SE-NCL 16 - 4” 115 115 DN100 (114.3)SE-NCL 17 125 - - 125 -SE-NCL 18 - - - 135 -SE-NCL 19 - 5” 140 140 DN125 (21.4)SE-NCL 20 - - - 152 -SE-NCL 21 159 - - 160 -SE-NCL 22 167 6” 168 - DN150 (168.3)SE-NCL 23 206 - - 200 -SE-NCL 24 - 8” 219 220,225 DN200 (225.0)SE-NCL 25 - - - 250 DN225 (250.4)SE-NCL 26 - - - - DN300 (315.5)

Product Code

Size Inches D (mm) Range

(mm)Dimensions Break

Load(Kg)

Safe Load(Kg)

A B C DSE-NCL 01 3/8” 15 15-19 60 20 26 36 450 150SE-NCL 02 1/2” 22 20-25 65 20 29 43 450 150SE-NCL 03 3/4” 28 26-30 70 20 32 50 450 150SE-NCL 04 1” 35 32-36 85 20 36 56 450 150SE-NCL 05 1.1/4” 42 38-43 92 20 39 63 450 150SE-NCL 06 1.1/2” 48 47-51 98 20 42 72 450 150SE-NCL 07 - 54 53-58 104 20 45 75 450 150SE-NCL 08 2” 60 60-64 110 20 48 81 450 150SE-NCL 09 - 63 63-66 115 20 51 88 450 150SE-NCL 10 - 70 68-72 120 20 53 91 450 150SE-NCL 11 2.1/2” 75 74-80 125 20 56 96 600 200SE-NCL 12 - 83 81-86 139 20 60 108 600 200SE-NCL 13 3” 90 87-92 146 20 63 111 600 200SE-NCL 14 3.1/2” 100 99-105 156 20 68 121 600 200SE-NCL 15 - 110 107-112 166 20 73 131 600 200SE-NCL 16 4” 115 113-118 171 20 76 136 600 200SE-NCL 17 - 125 125-130 181 20 81 146 600 200SE-NCL 18 - 133 131-137 184 20 85 154 600 200SE-NCL 19 5” 140 138-142 196 20 88 161 600 200SE-NCL 20 - 150 148-153 206 20 93 171 600 200SE-NCL 21 - 160 159-166 216 25 98 181 600 200SE-NCL 22 6” 168 168-172 224 25 102 189 600 200SE-NCL 23 8” 200 200-212 256 25 118 221 900 300SE-NCL 24 - 220 215-220 276 25 128 241 900 300SE-NCL 25 10” 250 269-274 306 25 143 271 900 300SE-NCL 26 12” 315 313-318 371 25 176 336 900 300

PiPe hanger With lining PiPe hanger With lining

8 9

cleVis hanger



• Designed for chilled water pipe work and fire fighting systems.

• Design permits vertical adjustment of pipe after installation.

• Designed to meet MSS-SP58, type -1


• Hanger load nut above Clevis must be tightened securely to ensure proper hanger performance.

Product code

Pipe Size Inches

Dimensions (mm)Max Load

KgsRode Hole Size Bolt Size H D

SE-CH 01 1/2” 10 M8 x 60 70 22 2710SE-CH 02 3/4” 10 M8 x 68 76 28 2710SE-CH 03 1” 10 M8 x 78 82 35 2710SE-CH 04 1.1/4” 10 M8 x 82 92 42 2710SE-CH 05 1.1/2” 10 M8 x 88 100 48 2710SE-CH 06 2” 10 M10x110 117 60 2710SE-CH 07 2.1/2” 10 M10x125 146 73 5020SE-CH 08 3” 10 M10x140 155 89 5020SE-CH 09 3.1/2” 10 M10x155 173 105 5020SE-CH 10 4” 10 M10x170 198 115 6360SE-CH 11 5” 12 M12x195 232 140 6360SE-CH 12 6” 12 M12x225 266 168 8630

SE-CH 13 8” 12 M12x275 338 219 8890SE-CH 14 10” 16 M16x360 419 273 16010SE-CH 15 12” 20 M20x420 490 323 16900SE-CH 16 14” 20 M20x455 556 355 18680SE-CH 17 16” 24 M24x510 610 406 20460SE-CH 18 18” 24 M24x555 675 457 21350SE-CH 19 20” 30 M24x610 715 508 21350SE-CH 20 24” 30 M24x710 850 610 21350

SE-CH 21 30” 30 M24x890 995 755 26690

cleVis hanger With linning



• Designed to meet MSS - SP 58 Type - 1

• Designed for chilled water pipe work and fire fighting systems.

• EPDM Lining rubber for sound reduction. Heat Resistance more then 120° Centigrade

• Design permits vertical adjustment of pipe after installation.

• Hanger load nut above Clevis must be tightened securely to ensure proper hanger performance.

• With highly elastic vibration control lining

• Vibration and Sound control tested

• Electrogalvanized as per ASTM B 633 Standards

Product code

Pipe Size

Inches

Max Load Kgs

Dimensions (mm)

Upper Steel

Lower Steel

Rode Hole Size

Bolt Size H D

SE-CH 01 1/2” 275 3 x 25 3 x 25 10 M8 x 60 73 22SE-CH 02 3/4” 275 3 x 25 3 x 25 10 M8 x 68 79 28SE-CH 03 1” 275 3 x 25 3 x 25 10 M8 x 78 85 35SE-CH 04 1.1/4” 275 3 x 25 3 x 25 10 M8 x 82 95 42SE-CH 05 1.1/2” 275 3 x 25 3 x 25 10 M8 x 88 103 48SE-CH 06 2” 275 3 x 25 3 x 25 10 M10 x 110 120 60SE-CH 07 2.1/2” 525 4 x 25 4 x 25 10 M10 x 125 149 73SE-CH 08 3” 525 4 x 25 4 x 25 10 M10 x 140 158 89SE-CH 09 3.1/2” 525 4 x 25 4 x 25 10 M10 x 155 176 105SE-CH 10 4” 650 6 x 32 6 x 32 10 M10 x 170 201 115SE-CH 11 5” 650 6 x 32 6 x 32 12 M12 x 195 235 140SE-CH 12 6” 875 6 x 32 6 x 32 12 M12 x 225 269 168SE-CH 13 8” 900 6 x40 5 x40 12 M12 x 275 341 219SE-CH 14 10” 1600 6 x40 6 x40 16 M16 x 360 422 273

sizes above 10” are made as per client’s request


The sizes of the Clevis Hangers can be modified to be used with Rubber Support Inserts.Custom made Clevis Hanger also available.

10 11

light saddle


• Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)

• Used to mount electrical and insulated pipes.

• Used for corner locking

• Used for better gripping of Electrical Conduits


Product Code Size (inches) Diameter (mm) Screw Size

SE - LS 01 1/2" 22 M6

SE - LS 02 3/4" 28 M6

SE - LS 03 1" 35 M6

SE - LS 04 1 1/4" 42 M6

SE - LS 05 1 1/2" 48 M6

SE - LS 06 - 54 M6

SE - LS 07 2" 60 M6

SE - LS 08 - 67 M6

SE - LS 09 2 1/2" 75 M6

SE - LS 10 - 82 M6

SE - LS 11 3" 90 M6

SE - LS 12 3 1/2" 100 M6

SE - LS 13 - 108 M6

SE - LS 14 4" 115 M6

SE - LS 15 - 126 M6

SE - LS 16 5" 140 M6

SE - LS 17 - 148 M6

SE - LS 18 - 155 M6

SE - LS 19 6" 167 M6

SE - LS 20 - 179 M6

SE - LS 21 - 190 M6

SE - LS 22 - 205 M6

SE - LS 23 8" 219 M8


Other Sizes available on request

half saddle



• Used to mount electrical and insulated pipes.

• Used for corner locking

• Used for better gripping of Electrical Conduits


Product Code Size (Inches) Diameter (mm) Screw SizeSE-HS 01 1/2" 22 M6SE-SC 02 3/4" 28 M6SE-SC 03 1" 35 M6SE-SC 04 1 1/4" 42 M6SE-SC 05 1/ 1/2" 48 M6SE-SC 06 - M6SE-SC 07 2" 60 M6SE-SC 08 - 67 M6SE-SC 09 2 1/2" 75 M6SE-SC 10 - 82 M6

measurements are subject to 5% tolerance.

Other sizes available on request

12 13

heaVy saddle With linning

Product technical descriPtion


• Used to mount plain or insulated pipes.


• Electrogalvanized as per ASTM B 633 StandardsProduct Name Size (inches) Diameter (mm) Screw size

SE-UCL 01 1/2" 22 M6

SE-UCL 02 3/4" 28 M6

SE-UCL 03 1" 35 M6

SE-UCL 04 1 1/4" 42 M6

SE-UCL 05 1 1/2" 48 M6

SE-UCL 06 - 54 M6

SE-UCL 07 2" 60 M6

SE-UCL 08 - 67 M6

SE-UCL 09 2 1/2" 75 M6

SE-UCL 10 - 82 M6

SE-UCL 11 3" 90 M6

SE-UCL 12 3 1/2" 100 M6

SE-UCL 13 - 108 M6

SE-UCL 14 4" 115 M6

SE-UCL 15 - 126 M6

SE-UCL 16 5" 140 M6

SE-UCL 17 - 148 M6

SE-UCL 18 - 155 M6

SE-UCL 19 6" 167 M6

SE-UCL 20 - 179 M6

SE-UCL 21 - 190 M6

SE-UCL 22 - 205 M6

SE-UCL 23 8" 219 M8

SE-UCL 24 - 230 M8

SE-UCL 25 - 241 M8

SE-UCL 26 - 263 M8

SE-UCL 27 10" 273 M8 measurements are subject to 5% tolerance Other Sizes available on request

heaVy saddle





• Electrogalvanized as per ASTM B 633 Standards Product

Code Size (inches) Diameter (mm) A (mm) B (mm)

SE-UC 01 1/2" 22 M6 16 X 1.6

SE-UC 02 3/4" 28 M6 16 X 1.6

SE-UC 03 1" 35 M6 16 X 1.6

SE-UC 04 1 1/4" 42 M6 16 X 1.6

SE-UC 05 1 1/2" 48 M6 16 X 1.6

SE-UC 06 - 54 M6 16 X 1.6

SE-UC 07 2" 60 M6 16 X 1.6

SE-UC 08 - 67 M6 16 X 1.6

SE-UC 09 2 1/2" 75 M6 16 X 1.6

SE-UC 10 - 82 M6 16 X 1.6

SE-UC 11 3" 90 M6 16 X 1.6

SE-UC 12 3 1/2" 100 M6 19 X 2.0

SE-UC 13 - 108 M6 19 X 2.0

SE-UC 14 4" 115 M6 19 X 2.0

SE-UC 15 - 126 M6 19 X 2.0

SE-UC 16 5" 140 M6 19 X 2.0

SE-UC 17 - 148 M6 19 X 2.0

SE-UC 18 - 155 M6 19 X 2.0

SE-UC 19 6" 167 M6 19 X 2.0

SE-UC 20 - 179 M6 25 X 2.0

SE-UC 21 - 190 M6 25 X 2.0

SE-UC 22 - 205 M6 25 X 2.0

SE-UC 23 8" 219 M8 25 X 2.0

SE-UC 24 - 230 M8 25 X 2.0

SE-UC 25 - 241 M8 25 X 2.0

SE-UC 26 - 263 M8 25 X 2.0

SE-UC 27 10" 273 M8 25 X 2.0



14 15

nail hanger

Product technical descriPtion:• Made with Mild steel (Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)

• Vertical installations. Steel, copper and PVC pipes

• Rivetted Rod Shaft for better gripping and mounting

• Side Screw: 6 x 20 – Phillip head with vicer

• M6 Side Nuts can be provided on request

• The two locking screws allow adjustment to accommodate a greater variation in pipe diameter

• Fastener screws with captive washer

• Suitable for installations without vibration control requirements


Product Code Size (inches) Dimension (mm) Screw Size

Shaft Size Square Rod

(mm)SE - NC 01 1/2" 22 M6 X 20 6 X 65

SE - NC 02 3/4" 28 M6 X 20 6 X 65

SE - NC 03 1" 35 M6 X 20 6 X 65

SE - NC 04 1 1/4" 42 M6 X 20 6 X 65

SE - NC 05 1 1/2" 48 M6 X 20 6 X 65

SE - NC 06 - 54 M6 X 20 6 X 65

SE - NC 07 2" 60 M6 X 20 6 X 65

SE - NC 08 - 67 M6 X 20 6 X 65

SE - NC 09 2 1/2" 75 M6 X 20 8 X 90

SE - NC 10 - 82 M6 X 20 8 X 90

SE - NC 11 3" 90 M6 X 20 8 X 90

SE - NC 12 3 1/2" 100 M6 X 20 8 X 90

SE - NC 13 - 108 M6 X 20 8 X 90

SE - NC 14 4" 115 M6 X 20 8 X 90

SE - NC 15 - 126 M6 X 20 8 X 90

SE - NC 16 5" 140 M6 X 20 8 X 90

SE - NC 17 - 148 M6 X 20 8 X 90

SE - NC 18 - 155 M6 X 20 8 X 90

SE - NC 19 6" 167 M6 X 20 8 X 90

SE - NC 20 - 179 M6 X 20 8 X 90

SE - NC 21 - 190 M6 X 20 8 X 90

SE - NC 22 - 205 M6 X 20 8 X 90

SE - NC 23 8" 219 M6 X 20 8 X 90



u straP hanger




• Can be used with Rubber Support Inserts.


Product Code Size (inches) Diameter

(mm) A (mm) B (mm) Bolt Size

SE-USC 01 1/2" 22 76 51 M8

SE-USC 02 3/4" 28 82 57 M8

SE-USC 03 1" 35 89 64 M8

SE-USC 04 1 1/4" 42 96 71 M8

SE-USC 05 1 1/2" 48 102 77 M8

SE-USC 06 - 54 108 83 M8

SE-USC 07 2" 60 114 89 M8

SE-USC 08 - 67 121 96 M8

SE-USC 09 2 1/2" 75 145 113 M8

SE-USC 10 - 82 152 120 M8

SE-USC 11 3" 90 160 128 M8

SE-USC 12 3 1/2" 100 170 138 M8

SE-USC 13 - 108 178 146 M8

SE-USC 14 4" 115 185 153 M8

SE-USC 15 - 126 196 164 M10

SE-USC 16 5" 140 210 178 M10

SE-USC 17 - 148 218 186 M10

SE-USC 18 - 155 225 193 M10

SE-USC 19 6" 167 237 205 M10

SE-USC 20 - 179 249 217 M10

SE-USC 21 - 190 260 228 M10

SE-USC 22 - 205 275 243 M10

SE-USC 23 8" 219 289 257 M10

SE-USC 24 - 230 300 268 M10

SE-USC 25 - 241 332 291 M12

SE-USC 26 - 263 354 313 M12

SE-USC 27 10" 273 364 323 M18

SE-USC 28 - 295 386 345 M18



U Strap Hangers can be custom made to be used as an pipe anchor with rubber support inserts.

16 17

u straP hanger With lining



• Galvanized u strap clamp with EPDM Lining.( EPDM rubber for sound reduction)


• Can be used with Rubber Support Inserts.




Product code

Pipe Size Inches

Dimensions (mm) Max Load KgsD A B Bolt Size

SE-CH 01 1/2” 22 79 54 M8 550SE-CH 02 3/4” 28 85 60 M8 550SE-CH 03 1” 35 92 67 M8 550SE-CH 04 1.1/4” 42 99 74 M8 550SE-CH 05 1.1/2” 48 105 80 M8 650SE-CH 06 54 111 86 M8 650SE-CH 07 2” 60 117 92 M8 650SE-CH 08 67 124 99 M8 650SE-CH 09 2.1/2” 75 148 116 M8 650SE-CH 10 82 155 123 M8 650SE-CH 11 3” 90 163 131 M8 650SE-CH 12 3.1/2” 100 173 141 M8 650SE-CH 13 108 181 149 M8 650SE-CH 14 4” 115 188 156 M8 650SE-CH 15 126 199 167 M10 650SE-CH 16 5” 140 213 181 M10 650SE-CH 17 148 221 189 M10 650SE-CH 18 155 228 196 M10 650

u straP hanger With lining

Product code

Pipe Size Inches

Dimensions (mm) Max Load KgsD A B Bolt Size

SE-CH 19 6” 168 240 208 M10 650SE-CH 20 179 252 220 M10 650

SE-CH 21 190 263 231 M10 900SE-CH 22 205 276 246 M10 900

SE-CH 23 8” 219 292 260 M10 900SE-CH 24 230 303 271 M10 900SE-CH 25 241 335 294 M12 1350SE-CH 26 263 357 316 M12 1350SE-CH 27 10” 273 367 326 M18 1350

SE-CH 28 295 389 348 M18 1350SE-CH 29 12” 323 417 376 M18 1350SE-CH 30 14” 356 450 409 M18 1900SE-CH 31 374 588 427 M18 1900SE-CH 32 16” 406 550 459 M18 1900SE-CH 33 432 526 485 M18 1900SE-CH 34 18” 456 550 509 M18 1900SE-CH 35 482 576 535 M18 1900SE-CH 36 20” 508 602 561 M18 1900SE-CH 37 533 627 586 M18 1900SE-CH 38 559 653 612 M18 1900SE-CH 39 583 677 636 M18 1900SE-CH 40 24” 601 704 663 M18 1900SE-CH 41 658 769 721 M18 2400SE-CH 42 690 801 753 M18 2400SE-CH 43 760 871 823 M18 2400SE-CH 44 863 974 926 M18 2400SE-CH 45 918 1029 981 M18 2400

18 19

offset hanger With lining (a - tyPe)



• Designed for fixing pipes away from Wall or Floor

• Side Screw: 6 x 20 – Phillip head with vicer & M6 nut

• M6 given on request




Product Code Size (inches)

DimensionMax Load

L W H

SE-AC 01 2" 214 186 83 150SE-AC 02 2 1/2" 269 231 113 180SE-AC 03 3" 284 246 113 200SE-AC 04 110mm 298 259 113 215SE-AC 05 4" 311 271 113 250SE-AC 06 5" 386 336 138 300SE-AC 07 6" 411 361 138 350SE-AC 08 168mm 431 394 138 375SE-AC 09 8" 469 419 138 400



offset hanger (a -tyPe)



• Designed for fixing pipes away from Wall or Floor

• Side Screw: 6 x 20 – Phillip head with vicer & M6 nut

• M6 given on request


Product Code Size (inches)

DimensionMax Load

L W H

SE-AC 01 2" 214 186 83 150SE-AC 02 2 1/2" 269 231 113 180SE-AC 03 3" 284 246 113 200SE-AC 04 110mm 298 259 113 215SE-AC 05 4" 311 271 113 250SE-AC 06 5" 386 336 138 300SE-AC 07 6" 411 361 138 350SE-AC 08 168mm 431 394 138 375SE-AC 09 8" 469 419 138 400



20 21

u Bolt



• Electro galvanized as per ASTM B 633 Standards.

• Hot dipped galvanized can be provided on request.

• Supplied with two or four nuts.

• Special U Bolts with longer tangents and threads can be furnished on request

Product Code Size (inches)Dimensions (mm)

A W L T

SE-UB 01 1/2" M10 21 65 50SE-UB 02 3/4" M10 27 77 50SE-UB 03 1" M10 34 85 50SE-UB 04 1 1/4" M10 43 93 50SE-UB 05 1 1/2" M10 48 100 50SE-UB 06 2" M10 60 110 50SE-UB 07 2 1/2" M12 76 127 50SE-UB 08 3" M12 89 140 50SE-UB 09 4" M12 115 165 50SE-UB 10 5" M12 140 190 50SE-UB 11 6" M12 168 220 50SE-UB 12 8" M16 219 295 75SE-UB 13 10" M20 273 370 100SE-UB 14 12" M20 324 420 100SE-UB 15 14" M20 356 455 100SE-UB 16 16" M20 406 505 100SE-UB 17 18" M24 457 555 100SE-UB 18 20" M24 508 605 100SE-UB 19 24" M24 610 710 100


U Bolt Sizes can be modified to match with Rubber Support Inserts. Alternate rod sizes for different pipe sizes also available.

lined u Bolt



• EPDM Lining for suppression of sound and vibrations.

• EPDM Lining rubber for sound reduction, Heat Resistance more then 120° Centigrade.

• Electro galvanized as per ASTM B 633 Standards.

• Hot dipped galvanized can be provided on request.

• Supplied with two or four nuts.

• Special U Bolts with longer tangents and threads can be furnished on request

Product Code Size (inches)Dimensions (mm)

A W L T

SE-LUB 01 1/2" 10 21 65 50SE-LUB 02 3/4" 10 27 77 50SE-LUB 03 1" 10 34 85 50SE-LUB 04 1 1/4" 10 43 93 50SE-LUB 05 1 1/2" 10 48 100 50SE-LUB 06 2" 10 60 110 50SE-LUB 07 2 1/2" 12 76 127 50SE-LUB 08 3" 12 89 140 50SE-LUB 09 4" 12 115 165 50SE-LUB 10 5" 12 140 190 50SE-LUB 11 6" 12 168 220 50SE-LUB 12 8" 16 219 295 75SE-LUB 13 10" 20 273 370 100SE-LUB 14 12" 20 324 420 100SE-LUB 15 14" 20 356 455 100SE-LUB 16 16" 20 406 505 100SE-LUB 17 18" 24 457 555 100SE-LUB 18 20" 24 508 605 100SE-LUB 19 24" 24 610 710 100


Alternate rod sizes for different pipe sizes also available.

2322

SS FLOOR DRAINOUT 3PC GRADENON MAGNETIC(BODY + SCREWED GRATING + LID)

Techinical Discription:200mm x 200mm x 102mm Fits Inside 4”Pipe 150mm x 150mm x 102mm Fits Inside 4”Pipe 109mm x 109mm x 78mm Fits Inside 3”Pipe 79mm x 79mm x 51mm Fits Inside 2”Pipe

Techinical Discription:200mm x 200mm x 102mm Fits Inside 4”Pipe 150mm x 150mm x 102mm Fits Inside 4”Pipe 109mm x 109mm x 78mm Fits Inside 3”Pipe 79mm x 79mm x 51mm Fits Inside 2”Pipe63 mm x63 mm x38 mm Fits Inside 1.1/2”Pipe

floor drains

stainless steel floor drains – non magnetic

ss floor grating 2Pc. - non magnetic (Body + screWed grating)

SS FLOOR CLEANOUT 2PC. - NON MAGNETIC(BODY + LID)

Techinical Discription:150mm x 150mm x 102mm Fits Inside 4”Pipe 109mm x 109mm x 78mm Fits Inside 3”Pipe 79mm x 79mm x 51mm Fits Inside 2”Pipe63 mm x63 mm x38 mm Fits Inside 1.1/2”Pipe

thumB tyPe

fixing accessories

threaded rodsProduct No Size

TR - 01 6mmTR - 02 8mmTR - 03 10mmTR - 04 12mmTR - 05 16mmTR - 06 18mmTR - 07 20mmTR - 08 22mmTR - 09 24mm

hex nutsProduct No Size

HN - 01 6mmHN - 02 8mmHN - 03 10mmHN - 04 12mmHN - 05 16mmHN - 06 18mmHN - 07 20mmHN - 08 22mmHN - 09 24mm

flat WashersProduct No Size

FW -01 6mmFW -02 8mmFW -03 10mmFW -04 12mmFW -05 16mmFW -06 18mmFW -07 20mmFW -08 22mmFW -09 24mm

eye nutsProduct No Size

EN -01 6mmEN -02 8mmEN -03 10mmEN -04 12mmEN -05 16mmEN -06 18mmEN -07 20mmEN -08 22mmEN -09 24mm

24 25

floor drainsfloor drains

26

floor drains

Project DetailsWe haVe associated With an exhaustiVe range of

Projects throughout the gulf

chemical Plants Buildings airPorts

railWays solar systems oil Plants

Bridges engineering Plants gas Plants

Head Office: Ind Area-02-Sharjah, Branch: Rolla,Sharjah, Rashidiya, Ajman.Tel-+9716-5332416 I Fax:-+97156-5332417,5332483 Tel:+9716-5360051, Fax: +9716-5360052.www. aquaarab.com

pipe support systems, pipe hangers & ss floor ... - aqua...

Documents