pir sensor murata

Pyroelectric Infrared Sensors

Cat.No.S21E-6

MurataManufacturing Co., Ltd.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note S21E.pdf09.6.24

for EU RoHS Compliant • All the products on this catalog are complied with EU RoHS. • EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use

of Certain Hazardous Substances in Electrical and Electronic Equipment". • For more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).





CONTENTS

SMD-Dual Type Pyroelectric Infrared Sensor IRS-A200ST01 Series

Dual Type Pyroelectric Infrared Sensor IRA-E700 Series

Quad Type Pyroelectric Infrared Sensor IRA-E900 Series

2

3

4

5

6

9

13

1

2

3

Fresnel Lens

Notice

Pyroelectric Infrared Sensor IRA/IRS Series Characteristics Data

Part Numbering

Recycled Paper

HIC® in this catalog are the trademarks of Murata Manufacturing Co., Ltd.

1

2

3





2

o Part Numbering

Pyroelectric Infrared Sensor

qProduct ID

wType

eCharacteristics

rIndividual Specification Code

* Part Number shows only an example which might be different from actual part number.* "eCharacteristics" and "rIndividual Specification Code" might have different digit number from actual Part Number.

(Part Number) IR S- A200ST 01

q w e r

-R1

t





1

3

Part Number

Responsivity (500K, 1Hz, 1Hz)

Field of View

Optical Filter

Electrode

Supply Voltage

Operating Temperature

Storage Temperature

3.8mVp-p (Typ.)±50°

5μm long-pass(2.5Z0.55mm)Z2

2 to 15V-40 to 70D

-40 to 85D

IRS-A200ST01

SMD-Dual Type Pyroelectric Infrared Sensor IRS-A200ST01 Series

Pyroelectric Infrared Sensors for Reflow Soldering

SMD type Pyroelectric infrared sensors, IRS series, exhibit high sensitivity and reliable performance made possible by Murata's ceramic technology and packaging technology developed over many years.IRS-A200ST01 series realizes cost benefits and higher performance with a new improved material of infrared ceramics.

! Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. 240°C peak Reflow soldering is available.4. High immunity to external noise (Vibration, RFI etc.)5. Higher in cost-performance

! Applications1. Security2. Lighting appliances3. Household or other appliances

!Rating (25˚C)

! Dimensions & Circuit Diagrams

3.85.76.5

0.8 4.3

GND

4.8

2.5

6.7

4-0.

8

0.550.550.55

1.4

2.0

1.4

2.6

01

x

Optical Filter Pyro-Element

Output terminal(Vout)

Power Supply Terminal (Vin)

General tolerance: ±0.2(in mm)

[ Top view ] [ Bottom view ]

0.55 0.55 0.55(in mm)

2.5

g

sRG

d





2

4

Dual Type Pyroelectric Infrared Sensor IRA-E700 Series


Pyroelectric infrared sensors, IRA series, exhibit high sensitivity and reliable performance made possible by Murata's ceramic technology and Hybrid IC technique expertise developed over many years.IRA-E700 series realizes cost benefits and higher performance with a new infrared sensor element of improved material parameters and fabrication.IRA-E700 series is available in two types.IRA-E710ST0 has enhanced immunity to RFI (Radio Frequency Interference).

! Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. Slight movement can be detectable.4. High immunity to external noise (Vibration, RFI etc.)5. Custom design is available.6. Higher in cost-performance


!Rating (25˚C)


IRA-E700ST0

(in mm)

∗Specified on the bottom of stem

General Tolerance : ±0.2

(in mm)

IRA-E710ST0

Part Number


Field of View

Optical Filter

Electrode

Supply Voltage


Storage Temperature

4.3mVp-p (Typ.)θ1=θ2=45°


2 to 15V-40 to 70D

-40 to 85D

IRA-E700ST0 IRA-E710ST0





3

5

Quad Type Pyroelectric Infrared Sensor IRA-E900 Series


Pyroelectric infrared sensors, IRA series, exhibit high sensitivity and reliable performance made possible by Murata's ceramic technology and Hybrid IC technique expertise developed over many years.IRA-E900 series realizes cost benefits and higher performance with a new infrared sensor element of improved material parameters and fabrication.IRA-E900 series is available in two types.IRA-E910ST1 has enhanced immunity to RFI (Radio Frequency Interference).

! Features1. High sensitivity and excellent S/N ratio2. High stability to temperature changes3. Slight movement can be detectable.4. Non directional sensing with wide F.O.V.5. High immunity to external noise (Vibration, RFI etc.)6. Custom design is available.7. Higher in cost-performance


! Rating (25˚C)


IRA-E900ST1

(in mm)

(in mm)

IRA-E910ST1

∗Specified on the bottom of stem

General Tolerance : ±0.2Part Number


Field of View

Optical Filter

Electrode

Supply Voltage


Storage Temperature

3.3mVp-p (Typ.)θ1=θ2=41°


3 to 15V-25 to 55D

-40 to 85D

IRA-E900ST1 IRA-E910ST1





5

6

! Spectral Response of Window Materials

! Frequency Characteristics

100

04000

Wave Number (cm–1)

80

60

40

20

3500 3000 2500 2000 1800 1600 1400 1200 1000 800

2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0

Wave Length (μm)

(%)


! Spectral Response of Window Materials





5

7


! Test Method of Sensitivity

! Typical Application Circuit (Human Detection)

*1 IRA-E420QW1

IRA-E420SW1

IRA-E700/E900 SeriesIRS-A200ST01 Series

700K400K

500K

Black Body

5Hz2.5Hz

1Hz

Mechanical Chopper





5

8

After test completion, leave for three hours in normal humidity temperature conditions, and then measure.1. External appearance:

No significant damage2. Sensitivity:

Tolerance within 20% deviation from original value

3. Noise:Maximum tolerance W100mV of original value

No generation of bubbles

! Reliability TestIRS-A200ST01 series, IRA-E700 series, IRA-E900 series

Item

High Temperature

Low Temperature

Humidity

Heat Cycle

Vibration

Shock

Soldering Heat

Hermetic Sealing

100D for 500 hrs.Y40D for 500 hrs.60D, 95% RH for 500 hrs.20 times of following cycle.Y25D, 30 min.⇨Room temp., 30 min.⇩⇧Room temp., 30 min.⇦55D, 30 min.Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3 perpendicular directions for 60 min.Apply shock of 100G sinewave by standard shock tester to each of 3 perpendicular directions.Immerse up to 3.0mm from can case in solder bath of 260T5D for 10T1 s.Conform to MIL-STD-202F chapter 112D, condition D.Immerse in fluorocarbon bath (FC-40) of 125T5D for 20 s.

Test Conditions Criteria






5

9

(in mm)

(in mm)

PPGI0601

PPGI0902

Pyroelectric Infrared Sensors/Fresnel Lens





5

10

(in mm)

PPGI0626


IML-0635





5

11


Fresnel lens are available upon request.

IML-0636

IML-0637

IML-06386.11m

4.91m

3m

3m

0m

Vertical

3m

On the Floor

3m

45.5ϒ

3m0m

45.5ϒ

42ϒ

42ϒ

Horizontal

Vertical

Pyroelectric ElementHorizontalAssembled with Murata sensor IRA-E700 Series.





5

12


86.7

2.75

5.279

4.4

6.79

5.2

(0.19) (in mm)

68

(1.02

5)

(C1.4) (O0.8

5)

R1

R0.3

4-R1-754-C1.25

Horizontal Vertical

3m

0m

3m

3m

3m

0m

3m

3m

Fresnel lens are available upon request.

IML-0642

9

(5.0

09)

(7.7

6)

7.16

2.75

A

A

R5.15

SR6

ø9

20.

6

ø9

5000

Side View Front View

(5279)

(1723)

(in mm)

(8780)

(5224)(1475)

(269

4)(2

234)

(337

0)(8

758)

(82.

43ϒ)

(62.

47ϒ)

IML-0658

Thickness 0.4t

21.5

ø11

ø10.

2ø1

2R6.5

SR5.5 1.25

43.

257.

254

0.90.5

0.07

1.55

1.13

0.57

Max

. 7.5

m

A330ST02+IML-0669 (Distance: 2.5m)

(A200ST01+IML-0669) (Distance: 2.5m) (A200ST01+IML-0669)

Max

. 6.0

m

Max

. 7.0

m

Max. 6.0m

Max. 6.5m Max. 7.5m

IML-0669



13

Notice

1. Caution (Design)(1) Please make sure that your product has been evaluated

and confirmed against your specifications when our product is mounted to your product.

(2) Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product.

(3) In case of outdoor use, suitable optical filter and water and humidity proof structure should be applied.

(4) To prevent failure or malfunction, please use a stabilized power supply.

(5) Please avoid using the sensor in the following conditions because it may cause failure or malfunction.(a) in such a fluid as water, alcohol etc. corrosive gas

(SO2, Cl2, NOX etc.) or sea breeze(b) in high humidity(c) in a place exposed directly to sunlight or headlights of

automobile(d) in a place exposed to rapid ambient temperature

change(e) in a place exposed directly to an air-conditioner or

heat vent(f) strong vibrations(g) in a place exposed to strong electromagnetic field(h) in such a place where infrared ray is shaded(i) in any other place similar to the above (a) through (h)

2. Caution (Mounting)(1) Soldering

(a) Hand soldering should be applied.

(b) Soldering should be done quickly as following.

(c) Soldering flux should be rosin flux and not contain more than 0.2wt% chlorine.Soldering flux should be removed after soldering.

(2) CleaningSoldering flux should be removed after soldering.Soldering flux may cause malfunction or degradation of character unless sufficiently cleaned.

3. Caution (Handling and Storage)(1) The optical filter of the sensor should not be scratched or

soiled.(2) Strong shock should be avoided.(3) Electrostatics and strong electromagnetic field should be

avoided.(4) The sensor should be kept on conductive sponge.(5) High temperature, high humidity, fluid such as water or

alcohol etc., corrosive gas (SO2, Cl2, NOX etc.) and sea breeze should be avoided.

! Notice

Temperature of soldering iron : 350˚C

Distance from can case1 to 3mmOver 3mm

Period of timeWithin 3 seconds per pointWithin 10 seconds per point





International Division3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]

Head Office1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, JapanPhone: 81-75-951-9111

pir sensor murata

Documents