pittsburgh corning accessories - foamglas

PITTSBURGH CORNING ACCESSORIESFOR FOAMGLAS® INSULATION SYSTEMS

Pittsburgh Corning has been the leader in cellular glass insulation system technology for more than 75 years. Our FOAMGLAS® Insulation and accessory products provide a comprehensive system solution for most industrial and commercial insulation needs. The importance of compatible accessory products such as adhesives, coatings, sealants, fabrics and jacketing should not be overlooked. Pittsburgh Corning’s accessories are formulated, designed and tested to ensure optimum performance of your FOAMGLAS® insulation system. Without such consideration, the dependability and performance of your system could be at risk. Therefore, we recommend the system approach when specifying insulation and accessory products. This is the most effective way to ensure your insulation system performs now and in the future. For additional information on FOAMGLAS® insulation, accessories or systems, please contact Pittsburgh Corning at any of our worldwide offices or visit us at www.foamglas.com.

©2016. Pittsburgh Corning. FOAMGLAS®, PITTSEAL®, PITTCOTE®, PITTWRAP® and PC® are federally registered trademarks in the United States and various other countries.

CRYOGENIC/COLD PIPE SYSTEMS

1

2

3

8

4

7

6

5

Insulation

Joint SealantOptions

Vapor Stop

Protective Jacketing

Cryogenic Adhesive

Protective Coating Options

Other

Reinforcing Fabric Options

Bore Coating Options

FOAMGLAS® Insulation -268°C to 482°C(-450°F to 900°F)

-150°C to 82°C(-238°F to 180°F)

-56.6°C to 82°C(-70°F to 180°F)

-196°C to 121°C(-320°F to 250°F)

-268°C to 482°C(-450°F to 900°F)

-268°C to 482°C(-450°F to 900°F)

-196°C to 320°C(-320°F to 608°F)

-182°C to 120°C(-296°F to 248°F)

No limit listed

No limit listed

-196°C to 121°C(-320°F to 250°F)

-50°C to 140°C(-58°F to 284°F)

-50°C to 75°C(-4°F to 167°F)

-40°C to 93°C(-40°F to 200°F)

A lightweight, rigid,cellular glass insulation

Butyl sealant

Butyl sealant

100% SolidsThree-component adhesive

A reactive gypsum product

A modified calcium sulphate product with inert mineral fillers

A two-component inorganic mortar for bore coating

A water-based product

Two componentcryogenic sealant

Self-sealing aluminum butyllaminate for above ground systems

Self-sealing modified bituminous membrane for above ground systems

Vapor barrier mastic/coating

Open mesh glass fabric

Open mesh synthetic fabric

Meets MIL-I-24244ASTM C795, NRC 1.36

Not for use on LOXor LIN systems

Must be protected from UV exposure with metal or other jacketing

Ideal for asphalt roller coatedapplications

For use on LOXor LIN systems

For use on LOXor LIN systems

PITTSEAL® 444Ns Sealant

PITTSEAL® 444N Sealant

PC® 42 Cryogenic adhesive

PC® 150 Mesh

Hydrocal® B-11 Adhesive

HTAA

PC® 80M Mortar

PITTCOTE® 16 LTAA

PITTSTOP™ 196 Vapor Stop

PITTWRAP® B100 Jacketing

PITTWRAP® IW50 Jacketing

PITTCOTE® 300 Finish

Strapping TapeMetal BandsMetal Cladding

PC® Fabric 79

Item Product Name Product Description Service Temperature1 Supplemental Information

5 5

4

3

2 28 9 6 7 91 1

Vapor Stop Detail

Protective Coating or Protective Jacketing

1 Service temperature limits are derived from laboratory evaluation of the product. Variations in substrates, loading conditions, or other external factors may further limit service temperature. Always consult Pittsburgh Corning’s FOAMGLAS® insulation guide specification for suitability for use recommendations for a specific application.

For joints, protrusions and laps


With Protective Coating and Cladding

With Protective Jacketing and Cladding

1 Insulation

2 Joint Sealant

3 Vapor Stop

4 Cryogenic Adhesive

5 Bore Coating

6 Reinforcing Fabric

7 Protective Coating

8 Protective Jacketing

9 Metal Cladding

INDOOR CHILLED WATER PIPE SYSTEMS


1

2

3

4

7

6

5

Insulation

Joint Sealant Options

Vapor Stop Options

Bore Coating

ProtectiveJacketing

Other


Reinforcing Fabric

FOAMGLAS® Insulation



PITTCOTE® 16 LTAA

PITTWRAP® CF Jacketing

Metal CladdingFoil WrapFilament TapeMetal Bands

PITTCOTE® 404 Coating

PC® Fabric 79

PC® 18 Bituminous Adhesive

PITTSEAL® CW Sealant




-268°C to 482°C(-450°F to 900°F)

-150°C to 82°C(-238°F to 180°F)

-150°C to 82°C(-238°F to 180°F)

-182°C to 120°C(-296°F to 248°F)

No limit listed

-40°C to 104°C(-40°F to 220°F)

-34°C to 82°C(-30°F to 180°F)

-59°C to 104°C(-75°F to 220°F)

-56.6°C to 82°C(-70°F to 180°F)

-30°C to 80°C(-22°F to 176°F)

-59°C to 104°C(-75°F to 220°F)

-56.6°C to 82°C(-70°F to 180°F)


Butyl sealant For joints, protrusions and laps




Butyl sealant


Cellulose free fiberglass reinforced vapor retarding jacket

Weather barrier mastic/coating


MS polymer

Butyl sealant

One componentbitumen cold glue

MS polymer

Butyl sealant

VOC compliantFor joints, protrusions and laps

Often supplied pre-jacketed forease of installation

VOC compliant

2 21 17 5 63 34 4

2

1 Insulation

Joint Sealant 4

3 Vapor Stop

Bore Coating 6


Protective Coating7 Protective Jacketing


For use with Reinforcing Fabric and Protective Coating or Protective Jacketing

With Protective Coating

With Protective Jacketing

OUTDOOR CHILLED WATER PIPE SYSTEMS


1

2

3

4

6

7

5

Insulation

Joint SealantOptions

Vapor Stop

Bore Coating

Other

Protective CoatingOptions

Protective Jacketing Options

Reinforcing Fabric

FOAMGLAS® Insulation



PITTCOTE® 16 LTAA

PITTCOTE® 300E Coating

PITTWRAP® B100

PITTWRAP® IW50

PITTWRAP® IW30

PC® Fabric 79




-268°C to 482°C(-450°F to 900°F)

-150°C to 82°C(-238°F to 180°F)

-150°C to 82°C(-238°F to 180°F)

-182°C to 120°C(-296°F to 248°F)

No limit listed

-40°C to 93°C(-40°F to 200°F)

-50°C to 140°C(-58°F to 284°F)

-20°C to 75°C(-4°F to 167°F)

-32°C to 38°C(-25°F to 100°F)

-59°C to 104°C(-75°F to 220°F)

-56.6°C to 82°C(-70°F to 180°F)

-59°C to 104°C(-75°F to 220°F)




Butyl sealant

Butyl sealant


Self-sealing aluminum butyl laminate for above-ground systems





MS polymer

Butyl sealant

MS polymer

VOC compliantFor joints, protrusions and laps

Must be protected from UV exposure with metal or other jacketing.

2 21 17 8 5 6 83 34 4

2

1 Insulation

Joint Sealant 4

3 Vapor Stop

Bore Coating 6


Protective Coating


8 Metal Cladding


PITTSEAL® 444N Sealant -56.6°C to 82°C(-70°F to 180°F)Butyl sealant

Metal CladdingFilament TapeMetal Bands


With Protective Coating and Cladding

With Protective Jacketing and Cladding

Ideal for asphalt roller coatedapplications

2

3

4

5

Sealant Options

Bore Coating

Protective CoatingOptions


Other

-268°C to 482°C(-450°F to 900°F)

-150°C to 82°C(-238°F to 180°F)

-268°C to 482°C(-450°F to 900°F)

-196C to 320C(-320F to 608F)

-268°C to 482°C(-450°F to 900°F)

-40C to 104°C(-40°F to 220°F)

-100°C to 204°C(-248°F to 400°F)

-150°C to 260°C(-238°F to 500°F)

Butyl sealant

A reactive gypsum product

Two component, inorganicnoncombustible bore coating

A modified calcium sulphate product with inert mineral fillers

PC® 80M Mortar and PC® 150 Mesh

Cellulose free fiberglassreinforced vapor retarding jacket

High TemperatureSilicone Sealant

High TemperatureSilicone Sealant





Stainless Steel Compatible

For use on LOXor LN2 systems

Not for indoor useFOAMGLAS® Stratafab™ Insulation


Hydrocal B-11 Adhesive

PC® 700K System

PITTWRAP® CF Jacketing

PC® 80M, Mortar

HTAA

PC® RTV 450 Sealant

PC® Hi-Temp RTV Sealant

ABOVE AMBIENT/HIGH TEMPERATURE PIPE SYSTEMS


1 Insulation Options FOAMGLAS® Insulation -268°C to 482°C

(-450°F to 900°F)A lightweight, rigid,cellular glass insulation


PITTSEAL® 444N Sealant -56.6°C to 82°C(-70°F to 180°F)Butyl sealant

Metal CladdingFilament TapeStainless Steel Bands

44

55

3

6 6

3 22

11

11

4

3

2

1 Insulation

Joint Sealant

Bore Coating

Protective Coating


6 Metal Cladding

Above Ambient

For Above Ambient with Protective Jacketing and Cladding

For High Temperature with Protective Jacketing and Cladding

For Above Ambient with Protective Coating and Cladding

For High Temperature with Protective Coating and Cladding

High TemperatureFor use with Reinforcing Fabric and Protective Coating or Protective Jacketing

Often supplied pre-jacketed forease of installation

TANK ROOF/SIDE WALL SYSTEMS

2

3

4

6

5

Sealant Options

Adhesive Options




Other



-150°C to 82°C(-238°F to 180°F)

-56.6°C to 82°C(-70°F to 180°F)

-180°C to 82°C(-292°F to 180°F)

-125°C to 60°C(-193°F to 140°F)

-40°C to 93°C(-40°F to 200°F)

-50°C to 140°C(-58°F to 284°F )

-34°C to 82°C(-30°F to 180°F)

No limit listed

No limit listed

Butyl sealant

Butyl sealant

Urethane modifiedAsphalt Adhesive


Self-sealing aluminum butyllaminate for above ground systems




Two-part adhesive is moisturecuring, polyether adhesive sealant

PC® 88 adhesive

PC® Fabric 79


PITTCOTE® 300E Finish


PC® 150 Mesh

PC® 99 2K adhesive


1 Insulation FOAMGLAS® Insulation -268°C to 482°C(-450°F to 900°F)


1 Insulation

2 Joint Sealant

3 Adhesive


5 Protective Coating



Metal JacketMetal CladdingMetal BandsMineral Wool


Adhered Banded




1 23 16 1 2 23 1 1145

1

2

3

4

5

Insulation

Adhesive

Tank Base Primer

Interleaving Layer

Jointing Tape

Other

FOAMGLAS® Block Insulation

Without Load-268°C to 482°C(-450°F to 900°F)

With Load-268°C to 400°C(-450°F to 752°F)

A high compressive strength and low thermal conductivity cellular glass block specially made for tank base construction and other industrial load bearing applications

Use FOAMGLAS® ONE™

Insulation for sidewalls andFOAMGLAS® HLB Insulationfor tank base

Urethane modified asphalt adhesive

Two part moisture curing,polyether adhesive

A low VOC cutback asphalt primer used to prime porous and prepared surfaces

A modified bitumen, nonmetallicsheet for use between layersof FOAMGLAS® Insulationtank base systems

For use between layersof FOAMGLAS® Insulation

A modified acrylic double-sided self-adhesive tape, scrimreinforced and solvent free

-150°C to 82°C(-230°F to 180°F)

-125°C to 60C(-193°F to 140°F)

-178°C to 82°C(-289°F to 180°F)

-180°C to 65°C(-292°F to 149°F)

-180°C to 65°C(-292°F to 149°F)

PC® 88

PC® 99 2K

PITTCOTE® TB Primer

PITTCOURSE™ 100High PerformanceDamp Proof Course

PITTCOURSE™ DPCJointing Tape

Asphalt Saturated FeltAsphalt Base SheetCeramic Paper,SandResilient Blanket, Perlite


5

2 31 4 4

5

1

1

4

3

2

1 Insulation

Adhesive

Tank Base Primer

Interleaving Layer

Jointing Tape

1 Service temperature limits are derived from laboratory evaluation of the product. Variations in substrates, loading conditions, or other external factors may further limit service temperature. Always consult Pittsburgh Corning’s FOAMGLAS® insulation guide specification for suitability for use recommendations for a specific application. Organic materials are not recommended for service temperature below -183°C (297°F)

CRYOGENIC TANK BASE SYSTEMS

3

4

2

5

6



AdhesiveOptions

ProtectiveJacketing

Other

-178°C to 82°C(-289°F to 180°F)

-125°C to 60°C(-193°F to 140°F)

No limit listed

No limit listed

-40°C to 93°C(-40°F to 200°F)

-34°C to 82°C(-30°F to 180°F)



Urethane modified asphalt adhesive

Two-part adhesive is moisturecuring, polyether adhesive sealant



PC® Fabric 79

PC® 150 Mesh

PC® 88 adhesive

PC® 99 2K adhesive


Metal BandsMetal CladdingElastomeric Sealant

PITTCOTE® 300E Finish



1 Insulation FOAMGLAS® Insulation -268°C to 482°C(-450°F to 900°F)



4 42 23 3 5 211 1

SPHERE SYSTEMS


-50°C to 140°C(-58°F to 284°F)Self-sealing aluminum butyl laminate


4

3

2

1 Insulation

Adhesive

Reinforcing Fabric

Protective Coating

Protective CoatingVapor Barrier Mastic with Cladding

Protective CoatingWeather Barrier

Protective Jacketingwith Cladding

DISCOVER OUR FULL LINEOF FOAMGLAS® INSULATIONSYSTEMS ACCESSORIES

PITTCOTE® COATINGSOur exterior coatings provide protection from weather, ultraviolet rays, and mechanical damage.

PC® ADHESIVESPittsburgh Corning adhesives are available for a wide range of FOAMGLAS® insulation applications on a variety of different substrates.

PITTWRAP® JACKETINGSPITTWRAP® Jacketings protect FOAMGLAS® insulation systems from physical and mechanical damage and shields the insulation from the elements.

PITTSEAL® SEALANTS ANDPITTSTOP™ PRODUCTSWhen used at joints, laps, protrusions and vapor stops, these products control water vapor migration.

PITTCOURSE™TANK BASE SYSTEMSPITTCOURSE™ High performance DPC and the tank base accessory products are used in conjunction with FOAMGLAS® HLB Insulation on cold and cryogenic tank bases.

FI-324 2/17

Pittsburgh Corning Corporation

Global Industry Headquarters800 Presque Isle DrivePittsburgh, PA 15239 USA

For electronic Sales and Technical Service inquiries,please visit www.foamglas.com

To contact by phone:Industrial & Commercial Sales

Americas+1 724 327 6100+1 800 545 5001

Asia-PacificSingapore: +65 9635 9184 China: +86 (0) 21 6140 8002Japan: +81 50 7554 0248

Europe, Middle East & Africa+32 13 661 721

Technical Services

Americas & Asia Pacific+1 800 327 6126

Europe, Middle East & Africa+32 13 611 468

©2017. Pittsburgh Corning. FOAMGLAS®, PITTSEAL®, PITTCOTE®, PITTWRAP® and PC® are federally registered trademarks in the United States and various other countries.

Disclaimer: The information contained herein is accurate and reliable to the best of our knowledge. The information is offered only as a guide for the purpose described herein and should be employed at the discretion of the user. This document has been prepared by Pittsburgh Corning using generally accepted and appropriate technical information, but it is not intended to be solely relied upon for specific design or technical applications. Having no control over the elements of design, installation, workmanship or site conditions, the final application procedure is the responsibility of the project designer, end user, and/or the owner. Therefore, Pittsburgh Corning disclaims all liability potentially arising from the use or misuse of this document, and NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE as to the performance of an installation containing Pittsburgh Corning products. In no event shall Pittsburgh Corning be liable for any damages arising because of product failure, whether incidental, special, consequential or punitive, regardless of the theory of liability upon which any such damages are claimed. Pittsburgh Corning provides written warranties for many of its products, and such warranties take precedence over the statements contained here.

pittsburgh corning accessories - foamglas

Documents