PL3CameraCalibration

1、First,installthecalibrationsoftware"SimpleBGC_GUI_2_40"onyourWindowscomputer.

2、LoosenthetwoscrewsintheredboxbelowandyoucanseetheUSBinterface.UsetheUSB

cabletolinkthecameraandthecomputer.

3、Placethecameraonthehorizontaltableandpressitflatwithyourhand.

4、Runthecameracalibrationsoftware"SimpleBGC_GUI_2_40".Andcompletethecalibration

accordingtothefollowingsteps:

Table1:Clickonthelabeledredbox,selectCOM66orothermaximumvalues,andclickonthe

connection(BlueArrow)

Table 2: After the connection is successful, the parameters on the right will change. The

arrow indicates that the connection is successful. Click Load（red rectangle）

Table3:Afterloading,selectfirmwaremarkedwithredboxandselectOpen

Table4:Selectthewritingoftheredbox,andthearrowinthelowerleftcornerwillshow“从控

制器上成功载入参数”whenthewritingissuccessful.

Table5:clicktheredboxandthearrowinthelowerleftcornerwillshow”加速度计校准开

始”,andthearrowinthelowerrightcornerwillshowaslightchange.

Note:Ifyoucan'tseethevaluejumpinthelowerrightcorner,justwait10secondsforthenext

step.

Table6:SelectCALIBGYRO,thelowerleftcornerwilldisplaytheEnglishletters,andthelower

rightcornerarrowvaluewilljumpslightly.

Note:Ifyoucan'tseethevaluejumpinthelowerrightcorner,justwait10secondsforthenext

step.

Table7:ChooseWriting.ThelowerleftcornerofsuccessfulWritingwillshow”当前配置文件成

功写入控制器”

CalibrationiscompletedandpulledoutUSBcable.CheckwhetherPL3cameraworksproperlyby

electrifying.