Plant Layout

User's Guide

Version 5 Release 16

Special NoticesCATIA is a registered trademark of Dassault Systmes.

Protected by one or more U.S. Patents number 5,615,321; 5,774,111; 5,821,941; 5,844,566; 6,233,351; 6,292,190; 6,360,357; 6,396,522; 6,459,441; 6,499,040; 6,545,680; 6,573,896; 6,597,382; 6,654,011; 6,654,027; 6,717,597; 6,745,100; 6,762,778; 6,828,974; 6,904,392 other patents pending.

DELMIA is a registered trademark of Dassault Systmes.

ENOVIA is a registered trademark of Dassault Systmes.

SMARTEAM is a registered trademark of SmarTeam Corporation Ltd.

Any of the following terms may be used in this publication. These terms are trademarks of:

Java Sun Microsystems Computer Company

OLE, VBScript for Windows, Visual Basic Microsoft Corporation

IMSpost Intelligent Manufacturing Software, Inc.

All other company names and product names mentioned are the property of their respective owners.

Certain portions of this product contain elements subject to copyright owned by the following entities:Copyright Dassault SystemesCopyright Dassault Systemes of AmericaCopyright D-Cubed Ltd., 1997-2000Copyright ITI 1997-2000Copyright Cenit 1997-2000Copyright Mental Images Gmbh & Co KG, Berlin/Germany 1986-2000Copyright Distrim2 Lda, 2000Copyright Institut National de Recherche en Informatique et en Automatique (INRIACopyright Compaq Computer CorporationCopyright Boeing CompanyCopyright IONA Technologies PLCCopyright Intelligent Manufacturing Software, Inc., 2000Copyright SmarTeam Corporation Ltd Copyright Xerox Engineering SystemsCopyright Bitstream Inc.Copyright IBM Corp.Copyright Silicon Graphics Inc.Copyright Installshield Software Corp., 1990-2000Copyright Microsoft CorporationCopyright Spatial Corp.Copyright LightWork Design Limited 1995-2000Copyright Mainsoft Corp.Copyright NCCS 1997-2000Copyright Weber-Moewius, D-SiegenCopyright Geometric Software Solutions Company Limited, 2001Copyright Cogito Inc.Copyright Tech Soft AmericaCopyright LMS International 2000, 2001

Raster Imaging Technology copyrighted by Snowbound Software Corporation 1993-2001

CAM-POST Version 2001/14.0 ICAM Technologies Corporation 1984-2001. All rights reserved

The 2D/2.5D Display analysis function, the MSC.Nastran interface and the ANSYS interface are based on LMS International technologies and have been developed by LMS International

ImpactXoft, IX Functional Modeling, IX Development, IX, IX Design, IXSPeeD, IX Speed Connector, IX Advanced Rendering, IX Interoperability Package, ImpactXoft Solver are trademarks of ImpactXoft. Copyright 2001-2002 ImpactXoft. All rights reserved.

This software contains portions of Lattice Technology, Inc. software. Copyright 1997-2004 Lattice Technology, Inc. All Rights Reserved.

Copyright 2005, Dassault Systmes. All rights reserved.

Plant Layout

Preface

Using This Guide

What's New?

Getting Started

Enter the Workbench Create a Plant Site Create a Building Create an Equipment Reservation Create a Walkway Set Correct Working Units and Grid Changing the Current Axis Saving Documents Updating Documents

User Tasks

Basic Layout Tools Making an Element Active Aligning Elements Creating a Temporary Axis Generating Detail Information Disable/Enable Manipulation Handles Activating the Product or Parent Using the Step Input Box and Construction Elements

Using Areas Create Area by Size and Location Creating an Area by Defining Two Corners Create an Area by Selecting inside Boundary Create an Area by Selecting the Lines of a Boundary Moving a Rectangular Contour of an Area Resizing the Contour of an Area Moving an Area Saving an Area in a Separate Document

Using Boundaries Creating a Boundary Stretching a Boundary

Using Item Reservations Creating an Item Reservation Moving an Item Reservation Resizing an Item Reservation Rotate Item Reservation with Definition Dialog Box

Create Item Reservation at Compass Base Plane Save Item Reservation in Separate Document Creating an Item Reservation Over a Resource Creating an Item Reservation on a Defined Plane Copying an Item Reservation

Using Resources Place Resource Exact Distance from Another Placing Parts in a CATProduct Drawing Detecting Clash in Parts Placement Placing Resources on Different Planes Creating a Parent-Child Relationship Rotate Resource Using the Definition Dialog Box Snap Resources Together Snap and Rotate a Resource Quick Snap Resources Using Quick Translate to Move Objects

Creating a Path Reservation Creating a Path Reservation Routing with Defined Nodes Routing From the End of a Routable Branching a Path Reservation

Using Routables Using the Definition Dialog Box Positioning a Branch Routing Using the Compass Base Plane Connecting Routables Disconnecting Routables Create a Closed Loop Run Open a Closed Run Changing a Section Changing the Angle of a Segment Moving Nodes Display Information About Routables Fit Segment for Parts Assembly Position Segment Relative to a Plane Transfer Run to Another Document

Managing Systems Creating a System Assembly Creating a Network Saving in Separate Document Creating a Logical Set

More Layout Tools Using Offset Planes and Advanced Offset Planes Using Construction Planes Moving Multiple Elements Changing the Properties of Multiple Elements Distributing Elements Mirroring Elements Rearranging the Specifications Tree

Tasks for Path Reservations

Routing Path Reservations With a Slope Routing Path Reservations in Any Direction Routing from an Item Reservation Fixing Broken Routables Edgeline: Routing Parallel to a Run

Tasks for Areas Performing an Inclusion Analysis Generating a Footprint Report Creating Area with Multiple Contours

Creating and Modifying Connectors Create Connectors Use the Compass to Manipulate Connectors Modifying or Deleting Connectors Creating Duplicate Connectors Using the Plane Manipulator Place Connector on Hole in V4 Model

Resources Change the Reference File for a Part Change the Parameters of a Part

Customizing

Customizing Settings General Display

Cache Mode Working in Cache Mode

Customizing the Dictionary of Types Customizing: Example Customizing: Procedure Searching User-Created Dictionary Entries

Customizing the Specifications Tree Display Creating a Catalog

Creating Parts Creating a Catalog Making a Catalog Accessible Catalog Keywords

Resource Properties for Objects

Workbench Description

Plant Layout Toolbar General Design Toolbar General Environment Toolbar Product Placement Toolbar

Glossary

Index

PrefaceThe Plant Layout product enables you to easily create a layout design for a manufacturing plant or other type of plant. The main focus of the product is to allow preliminary or conceptual design of a plant to be accomplished quickly. It provides an efficient, cost-effective way to lay out an initial plant design for review and validation. The initial plant design may then be expanded, evolved, and modified to continue the plant design process. The entire process is accomplished through a simple, highly intuitive interface, combining traditional 2D layout paradigms with full 3D capabilities to allow you to build a 3D digital representation of the plant.

The Plant Layout product can be used with other digital plant design products, such as Systems Routing, to satisfy plant design requirements. These products, together with the product portfolio, provide you with the complete ability to design and optimize your plant layout.

The Plant Layout User's Guide has been designed to show you how to create plant layout designs. Based on design factors and various industries and domains, different design approaches may be undertaken. This book provides an overview of the product and aims at illustrating specific design procedures to aid your plant design efforts.

Using This Guide

Using This GuideThis book describes how to use the Plant Layout product. Before you read it, you should be familiar with basic concepts such as document windows, standard tool bars, and view tool bars.

To get the most out of this guide, you should start with the tutorial in the Getting Started section.

The remaining sections of the book describe in detail the procedures for using all of the features of the Plant Layout product. The procedures are divided into basic, advanced, and customization sections.

What's New?

New Functionality

Enhanced Functionality

Getting Started

The following short tutorial provides an introduction to the Plant Layout product. It is intended to give you a feel for the product's capabilities in a few step-by-step scenarios, which are listed below.

Enter the WorkbenchCreate a Plant SiteCreate a Building

Create an Equipment ReservationCreate a Walkway

Set Correct Working Units and GridChanging the Current Axis

Saving DocumentsUpdating Documents

These tasks can be completed in about 15 minutes.

Entering the Plant Layout Workbench

This task explains how to enter the Plant Layout workbench..

1. On the menu bar click Start, select AEC Plant and then Plant Layout.

2. The Plant Layout workbench is loaded and an empty CATProduct document is opened.

Deactivate the option Work with cache system. To do this click Tools in the menu bar and then Options. In the dialog box that appears, select Infrastructure - Product Structure. Uncheck the option Work with cache system. Restart the application for the change to take effect.

Create a Plant Site

This task provides a basic description of how to create a plant site. More information on creating areas is provided in the section Using Areas.

1.

Click the Area button . The Area Creation dialog box displays.

2.

Click the Rectangular-Location button , then click the drop down arrow in the Type field and

select Site as the area Type. 3. To define the size of the site, key in these values:

X Length 1000 ft

Y Length 1000 ft

Height 100 ft

4. Click at any location. The plant site is created.

5. To display the entire site in your window, click the Fit All In button .

Create a Building

Now that you have defined a plant site, you will create a building on the site.

1.In the specification tree, double-click the site you created in the previous task.

The site is now the active area in the Plant Layout product.

2. Click the Boundary button . (Sometimes it is behind the Path Reservation button.) The Boundary dialog box displays.

3. Click the drop down arrow in the Type field and select Wall as the boundary Type.

. For Mode, select the Point-to-Point button .

4. Set the temporary grid to 10 ft.

5.Click several points inside the plant site to create a closed, non-rectangular polygon.

When you click the first point, a cross marks the spot. To close the polygon, select the cross.

6. Now you will define the area for the building. Click the Area button . The Area Creation dialog box displays.

7. Select the Bounded Inside button in the Create field. Click the drop down arrow in the Type

field and select Building as the area Type.

8. Click anywhere inside the wall you just created. This defines the site for your building and the "footprint".

9. To see the building and walls in the specification tree, click on the plus sign (+) next to the site name.

Create an Equipment Reservation

With a building now in place in your plant site, you can create an equipment reservation.

1. In the specification tree, double-click the building you created in the previous task to make it the active element.

2. Select the Item Reservation icon . The Item Reservation Creation dialog box appears.3. Select Equipment Reservation from the drop down list as the type of reservation.4. To define the size of the reservation, key in these values:

X Length 20 ft

Y Length 15 ft

Height 10 ft

5. Click anywhere in the building to define a location for the equipment reservation.6. Zoom in to get a closer view of your equipment reservation.7. To see the newly created equipment reservation in the specification tree, click on the plus sign (+)

next to the building name.

Create a Walkway

In this final task, you will create a walkway in your building.

1. Click the Path Reservation icon . The Path Reservation dialog box displays.2. Select Walkway from the drop down list as the type of path reservation.

3. Click the Section type icon . The Section dialog box opens.4. To define the size of the walkway, key in these values in the Section dialog box:

Height 8 ft

Width 6 ft

5. Click OK.

6. Click several points in the building to create the walkway. Double-click the last point to complete the walkway definition.

Set Working Units and Grid

This task describes how to set your working units.

1. Select Tools - Options and expand the General node. Select Parameters and Measure then click the Units tab.

2. Under Magnitudes, select Length and click the drop down arrow to set the unit of measure you will be using; Foot, Meter, etc.

3. Now, scroll down the list in Magnitudes and select Area. Select the unit of measure you will be using for area. Note: This is normally consistent with the Length standard.

4. To set the Grid Step, under Options, select Equipment & Systems and click on the General tab.5.

Enter a value for the Grid Step field; for example, 1 ft. The grid step is the increment used for snapping (to grid). Imagine a grid placed over your workspace, consisting of squares. The value you enter in this field becomes the distance between the lines of each square.

If you enter 1 ft, then, when routing, the run will extend by 1 ft at a time. Runs begin, end and turn at grid intersections (there are ways of overriding this). Similarly, when placing parts in free space (as opposed to on a run), they will place at grid intersections.

The grid step setting will display in the General Environment toolbar at the bottom of the 3-D viewer. You can change it in the toolbar during your session but the new value will only apply to your current session. If you close the application and reopen it, the toolbar will again display the value in the General tab page.

These will be your default settings and will remain in effect until you change them.

6. Click the OK button to complete the customization of the working units.

Changing the Current Axis

This task shows you how to change the current axis.

When you activate an object, the current axis is reset to the axis of that object. Changing the current axis changes the reference point by which elements are routed and placed.

1. Click the Change Current Axis icon .2. Select the object you want to use as a reference.

The axis for the selected object is displayed.3. You can also change the current axis and place the compass on the object. The compass allows you

to manipulate that object. To do this click the Change Current Axis and Snap Compass button and select the object. The axis and compass are both placed.

Saving Documents

This task contains recommendations on saving your documents.

Ways in which documents are saved are explained in the Infrastructure User's Guide - Creating, Opening and Saving Documents. You must read that documentation because the various methods are not explained here. This task simply suggests the methodology you should follow in specific circumstances.

1. If you are saving a document to a local machine or network drive it is recommended that you use the "Save Management" command initially. The Propagate Directory command (which is in the Save Management dialog box) should not be used routinely. It is meant to be used in specific circumstances, such as when you want to place all the contents of a document in one directory before sending it to another location.

2. If you are saving a document to another site or network you should use the "Send To" command. In this case, you should be careful about the links for documents such as resolved parts folder or line ID. These links could change to reflect the local network drive to which the documents have been sent. You should make sure they point to the original location - using the Reset button in the Save Management dialog box is one way of doing this.

3. You should check the active document before you execute the Save command . The root product must be the active document if you want to save everything under it.

Updating Documents

This task contains information on updating documents.

The connections in your design will not update automatically after you make certain changes to it, such as moving parts, runs or lofts. This behavior is by design, to enhance performance. In order to update your design

document click the Force Update button .

You can also update a part - see Placing Parts.

User Tasks

The tasks for laying out a design using the Plant Layout workbench are listed below.

Basic Layout ToolsUsing Areas

Using BoundariesUsing Item Reservations

Using ResourcesCreating a Path Reservation

Using RoutablesManaging SystemsMore Layout Tools

Tasks for Path ReservationsTasks for Areas

Creating and Modifying ConnectorsResources

Using Basic Layout Tools

The following procedures describe the basic tools available in the Plant Layout product for general layout functions.

Making an Element ActiveAligning Elements

Creating a Temporary AxisGenerating Detail Information

Disable/Enable Manipulation HandlesActivating the Product or Parent

Using the Step Input Box and Construction Elements

Making an Element Active

This task shows you how to make an element in a drawing active. An element is active when it is highlighted in blue in the specification tree, as shown below.

1. You can make an element active by following any of these steps: Double-click the element in the drawing or in the specification tree.

Select Activate Parent button to make the active element's parent active.

To activate an area, select the Activate Area button and then select any element under the area.

To activate a network, distribution system or logical set, select the Activate Network button

and then select any element under the network.

2. Optional. You can change the display of elements that are not active using the Toggle Dimming

Mode button on the General Environment Toolbar:When Dimming Mode is on, elements that are not active are dimmed.

When Dimming Mode is off, inactive elements are not dimmed.

Aligning Elements

This task shows you how to align elements in your layout.

You can align the center or the sides of an element to a user defined reference plane that you define. You can also rotate an element to align it with a reference plane.

1. Select the element(s) that you want to align.

2. Select the icon for the type of alignment you want to perform:

Align Sides: aligns the sides of two or more elements

Align Center: aligns along the centerlines of two or more elements

Rotate to Align: rotates elements on the axis to align them

Align Planes: aligns selected planes

Distribute: See Distributing elements

3. Define the plane to use as a reference for the alignment. If you have an offset plane already defined it will be used as the reference plane. If you do not already have the offset plane defined do the following:

a. Place your cursor over a geometric element that defines the plane (e.g., a construction plane, boundary, area contour, item reservation).

As you move the cursor, a small white rectangle is displayed to show the selectable planes, as shown below. A line normal to the rectangle shows the direction in which the alignment will be performed.

If you do not see the white rectangle, zoom out from the drawing. The white rectangle cannot be displayed if the element under your cursor is displayed too small.

b. Click to select the plane.

The selected elements are aligned along the plane.

4. Using the Align Planes command allows you to select any plane on an item reservation or part. After you select the first plane to which to align to, you can only select a plane that is parallel to it. For instance, if you select the the top of an item reservation you need to select the top or bottom of the second item reservation - you cannot select the sides.

Click any button in one of the tool bars to exit the alignment command. If you want to continue with the alignment command using the same reference plane then select another element in the model.

Creating a Temporary Axis

This task shows you how to create a temporary axis. It will allow you to create an axis at any location.

The current axis is the reference point by which elements are routed and placed. It is also the reference point from which an element's position is determined (as displayed in the X,Y,Z fields on the Definition dialog box for an element). When you create a temporary axis it allows you to place or manipulate resources with reference to that axis.

1.

Click the Item Position button.

2. Click at the location where you want to place the temporary axis. This creates an axis at that

location. 3.

Click the Change current axis button and click on the temporary axis you just created. The temporary axis can now be used as the reference axis.

4. You can also use the compass to define the plane for a temporary axis. To place a temporary axis at the compass base plane, first drag the compass to the plane where you want the axis.

You will have to delete the temporary axes in the specifications tree when you no longer need them.

Generating Detail Information

This task shows you how to display detailed information about objects as you move the pointer over them.

The Analyze Item command displays information about an object when the pointer passes over it. This information can include line IDs, nominal size of runs and parts, XYZ coordinates of connectors, etc. The type of information shown will depend on the object and the product you are using. See also Display Information About Routables.

From Release 13 the angle of routables from the x,y,z axis will also display, as in the image below.

1.

With your document open, click the Analyze Item button .2. Move the pointer in the document highlighting various objects. Attributes and their values are

displayed, depending on the type of object highlighted. In the illustration below the pointer is on a tubing tee.

3. When you click again the feature will be disabled.

Disabling/Enabling Manipulation Handles

This task shows you how to disable or enable manipulator handles using the Toggle Manipulator Handle Mode command.

The default is for the manipulation handles to be enabled. If you are working on a large document, however, displaying the handles on each part can take up time. If you do not need the handles then you can use this feature to disable the display. It is a toggle button, so clicking it again will enable the handles. This feature can be used with parts placed in-line or in free space.

1.To disable display of the manipulation 'handles' click the Toggle Manipulation Handle Mode button

. To enable them again click the button once more. The handles look like a green box on parts placed in free space. On parts placed in line they look like the image below.

Activating the Product/Product Parent

This task shows you how to activate the product or product's parent.

This command can be useful when you have numerous objects and/or documents displayed in the specifications tree. It helps you activate an object, or locate the parent to which an object belongs.

1.

Click the button Activate Product's Parent . The Activate Product dialog box displays.

2. If you want to activate an object then click on the object, in the specifications tree or viewer. If you want to activate the object's parent, then click the checkbox Activate Product's Parent and select the object. The parent will be selected and highlighted in the specifications tree.

Using the Step Input Box and Construction Elements

This task shows you how to use the step input box and construction elements for more control over routing and placing of resources and item reservations.

The value entered in the step input box is used for accurate routing and resource placement. You can only route in multiples of the value in the step input box. If the value is 0.25 meters you cannot create a run that is 0.33 meters in length, but you can create runs that are 0.50, 0.75 meters and so on.

The value in the step input box works with some of the construction elements to further refine your routing and resource placement, as explained below.1.

To enter a value in the step input box, select the increment field and key in a value. You can also click on the down arrow and select a value, if it is appropriate for your task. The following sections explain how the step input box is used together with some of the construction elements.

2.

Click on the down arrow and select the Snap to steps off current axis button.

This allows you to snap to points that are multiples of the value entered in the step input box measured from the current axis (also called origin). As you move your mouse pointer a label displays the distances (coordinates) from the current axis in multiples of the value entered in the step input box. In the illustration below, the label is showing that the distance is 500 mm from the axis along the X axis, and 500 mm from the axis along the Y axis. When routing you can create segments whose length is in multiples of 500 mm only. Similarly, you can only place (or move) a resource at points that are measured in multiples of 500 mm from the axis. You can change the value in the step input box at any time.

3.

Click the Snap to steps off last position button.

This allows you to snap to points that are multiples of the value in the step input box measured from the last point at which you clicked. When you select this option the label first shows the distances from the current axis. After you click, it shows the distances from the last point where you clicked. You can change the value in the step input box after a click if you want to route a segment of a certain length or place a resource an exact distance away from where you last clicked.

4.

Click the Snap to XY construction planes button.

This option allows you to snap to the XY grids on a construction plane. You first create a grid using the Construction Planes command. If you have an XY grid you can only place resources at, or route to, the intersections of X and Y grids. If you have only X or Y grids you can only place resources at, or route to, the grid lines.

5.

Click the Snap to all construction planes button.

Choosing this option allows you to snap to the X, Y or Z grids. 6.

Click the Snap to elevation planes button.

Selecting this option allows you to snap to the elevation planes of a Z grid. In the illustration below the user is routing on the Z axis and snapping to the elevation planes of the Z grid.

7.

Click the Snap to Drafting elements button.

Use this option when attaching the drafting view of a 2D drawing to an area. You can snap to the elements of the 2D drawing. For instance, if you are attaching the 2D drawing of a conveyor belt to an area, choose this option to use the Conveyor Reservation function to select the drawing (you select by clicking on different elements of the drawing). This allows you to create an identical conveyor layout in 3D.

Using Areas

You can create and modify areas in any of the following ways.

Create Area by Size and LocationCreating an Area by Defining Two Corners

Create an Area by Selecting inside BoundaryCreate an Area by Selecting the Lines of a Boundary

Moving a Rectangular Contour of an AreaResizing the Contour of an Area

Moving an AreaSaving an Area in a Separate Document

Creating an Area by Size and Location

This task shows you how to create an area by keying in a size and clicking a location.

1.

Click the Area button .The Area Creation dialog box is displayed.

2.

Select the Rectangular - Location button .3. Select the Type of area you want to create:

4. If you need to then check Set area origin same as parent. This will make the origin of the area you create the same as the parent object, which is the current active object.

5. Define the size of the area: X Length

Y Length

Height

You can only define the X and Y values for the Rectangular - Location option. The Height value can be defined for all options.

6. Select a display option:

(Solid) displays the area at full height.

(Flat) displays the area with no height.

7. Optional. To display descriptive text on the area, activate either or both of these options: Display Text for Name: shows the area name.

Display Text for Size: shows the area size.

You should be able to see the shape of your area when you move the mouse pointer. If you do not see

it then click the Fit All In button.

8. Check Create Area in New Document if you want to do so. See Saving an Area in a New Document.

9. Define the elevation of the area you will create. Check one of the options: Use the Current Compass Location: The area will be placed at the same elevation as the

compass (assuming you have placed the compass on an object).

Use User Input Elevation: The area will be placed at the elevation you enter in the Elevation field, and will be relative to the current active object.

10. You are now ready to indicate a location for your area by clicking the left mouse button. Before doing so you can use the Shift key to toggle the axis to one of the four corners or the center of the area. See below.

The area is displayed after you click the left mouse button.

You can use the Shift key to toggle the axis to one of the four corners or the center of the area you are creating. After Step 9 above:

A. Move your mouse pointer so that your area is located where you want it.

B. Use the Shift key to toggle the axis. Then go to Step 8. The pictures below show the axis toggled from center to upper left.

Creating an Area by Defining Two Corners

This task shows you how to create an area by defining two corners. The task Create Area by Size and Location contains more comprehensive information about some of these steps.

1.

Click the Area button . The Area Creation dialog box is displays.

2.

Select the Rectangular - Corners button . 3. Select the Type of area you want to create.

4. Define a height for the area. You cannot set X and Y dimensions using this option.

5. Select other options, as needed, displayed in the Area Creation dialog box. These are explained in Create Area by Size and Location.

6. Indicate a location for the first corner.

7. Indicate a location for the second (opposite) corner.

The area is displayed.

Create Area by Selecting Inside Boundary

This task shows you how to create an area inside a boundary by clicking anywhere inside the boundary lines. The task Create Area by Size and Location contains more comprehensive information about some of these steps.

1. Create a boundary. See Creating a Boundary for instructions.

2. Click the Area button .

The Area Creation dialog box displays.

3.

Select the Bounded - Inside button . 4. Select the Type of area you want to create.

5. Define a height for the area. You cannot set X and Y dimensions using this option.

6. Select other options, as needed, displayed in the Area Creation dialog box. These are explained in Create Area by Size and Location.

7. Click anywhere inside the boundary. The area is displayed.

Sometimes the area will not display correctly inside the boundary - it may overlap a part of the boundary or not align with a portion correctly. In such cases delete the area and click again at a location that is different from the last location you clicked at. It may take two or three tries before you get the correct display.

Create Area by Selecting Lines of Boundary

This task shows you how to create an area inside a boundary by selecting each of the lines that make up the boundary. The task Create Area by Size and Location contains more comprehensive information about some of these steps.

1. Create a boundary. See Creating a Boundary for instructions.

2.

Click the Area button . The Area Creation dialog box displays.

3.

Select the Bounded - Select button . 4. Select the Type of area you want to create.

5. Define a height for the area. You cannot set X and Y dimensions using this option.

6. Select other options, as needed, displayed in the Area Creation dialog box. These are explained in Create Area by Size and Location.

7. Select the boundary lines that you want to outline the area. The area is displayed.

Moving a Rectangular Contour of an Area

This task shows you how to move a rectangular contour of an area.

1. Make the area active.

See Making an Element Active for instructions.

2. Click the contour for the area.The contour is highlighted.

3. Place your cursor at the desired location on the contour.

As you move the cursor over the contour, visual "cues" are displayed to show how you can move contour.

A plane is displayed when the cursor is over a line to show that you can move the contour along that line.

A cross hair is displayed when the cursor is on a corner. From a corner, you can move the contour in any direction.

4.Drag the contour to a new location.

5. Select the Update button to see the modification.

Resizing the Contour of an Area

This task shows you how to resize the contour of an area.

1. Right-click the contour.

2. From the pull-down menu, put your cursor over the name of the contour (e.g., Rectangle 7.1.object) and select the Definition option.

The Rectangular Contour Definition dialog box is displayed, and manipulation handles are displayed on the contour.

3. Do either of the following: Key in new values for the X length and/or the Y length.

Place the cursor over one of the handles and drag it to resize the contour.

4. Select Apply on the Rectangular Contour Definition dialog box

5.

Select the Update button to see the modification.

Moving an Area

This task shows you how to move an area.

1. Make the parent element of the area active.

See Making an Element Active for instructions.

2. Select an element in the area.The area axis is displayed.

3. Place the cursor over the axis and drag it to the new location. Select one of the axis arrows to move along a plane.

Select the center of the axis to move in any direction.

Saving an Area in a Separate Document

This task shows you how to create an area in a project and save it as a separate document.This function is needed if you want to work on a component of a larger project. If you save the component as a separate document you can open it without having to open the entire project. At the same time it remains part of the larger project.1. Make the parent area active.

2. Click the Area button and enter all the information you need to.3. Check the option Create area in new document. This displays a field asking for a file name.4. Enter a file name and create your sub-area. Sub-areas that are saved as separate documents are

identified by a unique icon in the specifications tree. In the image below, Building1 is not saved as a separate document, whereas newbuilding and anotherbuilding have been saved as separate documents.

5. When you save the document you will be asked if you want to save other documents. Click OK.

6. When you need to work on an area which has been saved in a separate document then use the File-Open function and navigate to the directory where you saved the documents.

If you delete one of the sub-areas in a project, then you must also delete the corresponding document from the directory where you saved it. Use the Windows Explorer function for this.

Using Boundaries

The following procedures describe how to create and modify boundaries.

Creating a BoundaryStretching a Boundary

Creating a Boundary

This task shows you how to create a boundary.

1.

On the Path Reservation/Boundary toolbar , click the Boundary button .

The Boundary dialog box displays.

2. Select the Type of boundary you want to create:

3. Define the Mode for routing

Point-to-Point

Orthogonal

Edgeline

If you want to branch from the center of the segment, click the Branch at Center button. The branch will begin from the center of the segment, irrespective of the point in the segment that you route from.

In addition, if you place the compass on an object the Use Compass Origin button will display. If you click the button and start to route the route will start from the compass origin. If you are in the middle of routing, the compass origin will serve as a routing point.

Click one of the Select Mode buttons - the default is No Filter. The Select Mode buttons allow you to define where you can start routing from.

No Filter: No filters are applied and you can route from any routable object or in space.

In Space: Routing will be in space. This is useful when you have a large object in the background, such as a ship structure, and you want to be able to route in space.

Only Part Connectors: Select this to be able to route from part or equipment connectors only.

4. Define the Section type:

No Section

Rectangular Section

If you select Rectangular Section, define these parameters:

Set Point:

Height

Display:

No section

True Size

Flat

Instead of entering the type of boundary, the set point and the height, width or diameter in the Section dialog box, you can select an existing boundary in your document. Once you select the boundary the Section dialog box will display the same values as the one you selected. To select, click on the Path Reservation button and then click the left mouse button once on the boundary whose values you want as the default. Make sure the entire boundary is selected, and not just one segment or node. It will be easier to select the boundary in the specifications tree.

5. Indicate a location for the endpoint of each side.

The boundary is displayed as you move the cursor.6. Double-click to end the boundary definition.

Stretching a Boundary

This task shows you how to re-define a boundary by stretching its sides.

1. Right click the boundary you want to stretch.

2. From the pull-down menu, place the cursor over the boundary object name (e.g., Boundary1.1.object) and select the Definition option.

The points, lines and section outlines (if any) that define the boundary are displayed, along with the Definition window.

3. Grab the end point of the boundary and drag it to the new location.4. Select Apply on the Definition window to complete the change.

Using Item Reservations

The following procedures describe how to use item reservations.

Creating an Item ReservationMoving an Item ReservationResizing an Item Reservation

Rotate Item Reservation with Definition Dialog BoxCreate Item Reservation at Compass Base PlaneSave Item Reservation in Separate DocumentCreating an Item Reservation Over a Resource

Creating an Item Reservation on a Defined PlaneCopying an Item Reservation

Creating an Item Reservation

This task shows you how to create an item reservation.

1.

Select the Item Reservation button .

The Item Reservation dialog box is displayed.

2. Specify the type of reservation you want to create:

3. Specify the size of the item reservation by keying in these values: X Length

Y Length

Height

4 Specify the visual mode for the item reservation:

Display as Box

Display as Flat

5. Specify the location for the item reservation.

The Link to a Function button is used in some Electrical products to link a function to an item reservation. See relevant documentation for more information.

Moving an Item Reservation

This task shows you how to move an item reservation.

1. Make the item reservation's parent the active element.

See Making an Element Active for instructions.

2.Click the item reservation.The item reservation is highlighted.

3. Place your cursor at the desired location on the item reservation.

As you move the cursor over the item reservation, visual "cues" are displayed to show how you can move it.

A plane is displayed when the cursor is over a line to show that you can move the item reservation along that line.

A cross hair is displayed when the cursor is on a corner. From a corner, you can move the item reservation in any direction.

4.Drag the item reservation to a new location.

5.

Select the Update button to see the modification.

Resizing an Item Reservation

This task explains how to resize an item reservation.

1. Right-click the item reservation.

2. Select the item reservation object on the pull-down menu. If the item reservation is empty, this menu is displayed:

If the item reservation contains a resource, this menu is displayed:

3. Do any of the following to change the size:

To key in a new size, do the following:

a. Select Edit -> Definition..

The Item Reservation Definition dialog box is displayed.

b. Key in new values for the X Length, Y Length, and/or Height.c. Select OK on the Item Reservation Definition dialog box.

To resize the item reservation using the cursor, do the following:

a. Select Edit -> Definition.

Manipulation handles are displayed on the item reservation.

b. Place the cursor over one of the handles and drag it to resize the item reservation.

c. Select OK on the Item Reservation Definition dialog box.

To resize the item reservation so that it just encloses the resource it contains, select Edit -> Update Dimensions.

If the item reservation contains any connectors they will be relocated proportionately after the resizing.

Rotate Item Reservation Using the Definition Dialog Box

This task shows you how to rotate an item reservation by entering into the definition dialog box the number of degrees that you want it to rotate on its vertical axis..

1. Click on the item reservation.

2. Click Edit in the menu bar and then on the line that corresponds to the item reservation you want to rotate, e.g. "item reservation2.1 object." This displays the Definition dialog box. (You can also enter Cntrl-Enter to display the panel.)

3. Enter the degrees in the Rotation space.4. Click Apply and the item reservation will rotate on its vertical axis.

Create Item Reservation at Compass Base Plane

This task shows you how to create an item reservation at the compass base plane.

1. Drag the compass and place it at the level where you want to create the new item reservation.

2. Create the new item reservation. See Creating an item reservation for more information.

3. When you click the left mouse button to place the item reservation it will be placed at the compass base plane. In the illustration below the compass has been placed on top of an item reservation. The new item reservation is created at that level.

Save an Item Reservation in a Separate Document

This task shows you how to create an item reservation in a project and save it as a separate document.

This function is needed if you want to work on a component of a larger project. If you save the component as a separate document you can open it without having to open the entire project. At the same time it remains part of the larger project.

1. Make the parent area active.

2.

Click the Item Reservation button and enter all the information you need to.3. Check the option Create new document. This displays a field asking for a file name.

4. Enter a file name and create your item reservation.5. When you save the document you will be asked if you want to save other documents. Click OK.6. When you need to work on an item reservation that is saved in a separate document then use the

File-Open function and navigate to the directory where you saved the document.

If you delete one of the item reservations in a project, then you must also delete the corresponding document from the directory where you saved it. Use the Windows Explorer function for this.

Creating an Item Reservation Over a Resource

This task shows you how to place an item reservation over an existing resource.

1. Click on the Item Reservation button. The Item Reservation Creation dialog box shows.

2.

Click on the Surround resource button . 3. Click on the resource on which you want to place the item reservation. The item reservation will be

placed around the resource.

You do not need to enter values in the X length, Y length and Height fields, except when two of these three dimensions are 0 in the resource over which you want to place an item reservation. Examples would be a line or a point. In such cases the item reservation will assume the dimensions entered in the size fields .

Creating an Item Reservation on a Defined Plane

This task shows you how to place an item reservation on a defined plane.

When you create an item reservation it is normally placed on the base plane. This function allows you to place it at any plane or location in your document.

1.

Click the Item Reservation button . The Item Reservation Creation dialog box shows.2.

Click the On Surface button . 3. Move your mouse pointer and click at the location where you want to place the item reservation - a

white square shows as you move the pointer. Note: you cannot place an item reservation in free space or on an area using the On Surface option.

Copying an Item Reservation

This task shows you how to copy an item reservation.

1.

With the item reservation you want to copy displayed, click the Copy Item Reservation button . The Item Reservation Copy dialog box displays.

2. Click one of the buttons to define the distance between the item reservations from center-to-center or edge-to-edge, enter the distance between the items reservations in the Offset field and the number of additional copies you want in the Instances field.

3. Click on the item reservation you want to copy. The compass displays.

4. The item reservations will be placed in the direction indicated by the compass Z axis. Manipulate the compass so that the Z axis is pointing in the direction you want to place the item reservations.

5. Click OK. The item reservations will be placed.

Using ResourcesThis section tells you how to use resources in various ways.

Place Resource Exact Distance from AnotherPlacing Parts in a CATProduct Drawing

Detecting Clash in Parts PlacementPlacing Resources on Different PlanesCreating a Parent-Child Relationship

Rotate Resource Using the Definition Dialog BoxSnap Resources Together

Snap and Rotate a ResourceQuick Snap Resources

Using Quick Translate to Move Objects

Place a Resource an Exact Distance from Another

This task shows you how to place one resource a precise distance from another.

1. Define a plane to use as a temporary reference point from which to measure distance. Click on the

Offset Plane button and then on the resource on which you want to place the temporary reference. This will place a blue square on the resource. See Using Offset Planes for more detail.

2.

Enter an appropriate figure in the steps input box ( ). When you are moving your resource, the distance from the second resource will be shown in multiples of the figure in the steps input box. You can use this feature to display the exact distance - for example, if you want to place your resource 11.3 feet from a second resource enter this figure in the steps input box.

3. Click on the resource to be moved. This displays an arrow. Place the mouse pointer on the base of the arrow and drag it. A white square displays. Place this white square on whichever surface you want to use as the point from which distance is measured.

The default measuring point is the middle of the resource that is being moved. In the example below the distance is measured from the forward surface of the robot to the blue square.

4. Place the mouse pointer on the arrow. This displays the distance from the blue square to a white square that is displayed. The distance is displayed in multiples of the figure you entered in the steps input box. You can now move the resource to place it a precise distance from the temporary reference plane. Click and drag the tip of the arrow to do this (do not drag the base of the arrow for this function).

Placing Parts in a CATProduct DrawingThis task shows you how to place a part from a catalog into a CATProduct drawing.

You need to specify the location of a catalog to access it. You can then place parts from this catalog into a CATProduct drawing.

See also Detecting Clash in Parts Placement.1.

Click the Place Object from Catalog button . The Catalog Browser displays.

2. Navigate to the catalog from which you want to select a part.

If you want to define a new search path then click Tools-Options, select General and select the Document tab. Select Other folders in the window and click Configure. Navigate to the catalog you want to add, click Add. You can save your search order by clicking on Export, in which case they will be stored in a file in a directory you specify. To restore your search order at a later date navigate to the file and click Import. Click OK to end.

3. Double-click on the directories until you are in the page where the parts are. Click on a part to select it.

4. Click at one or more locations to place the part. NOTE: To place a part, you can also select an

element in the specifications tree, such as an area or item reservation. In this case the part will be placed at the origin of the element you selected.

Some parts have restrictions attached to them and you will not be able to place them in certain locations. For instance, you will not be able to place an elbow on a straight segment in a run.

You can choose to display or hide a "preview" of the part you are placing. To do this click on Tools - Options, select AEC Plant and the General tab. Check or uncheck the box Display image while placing catalog object in 3D viewer to obtain the effect you want.

By default, when you click (in free space) to place a part the center of that part will be placed at that location. The center is determined by the application by drawing a box around the part and selecting the center of the base of the box. You can also choose to place the origin of the part at the point where you click. To do this click on Tools - Options, select AEC Plant and the General tab. Check the box Place at component's origin when placing in free space.You can enter coordinates in the position input box

to place an object a certain distance from the axis. You can also enter these coordinates to place an object a certain distance from the compass. To

do this place the compass where you want it, select Snap to Steps Off Last Position , and enter the coordinates.To place a part inside an item reservation depress the shift key and click the mouse button. To place a part on a face of an item reservation simply click the mouse button.

Some parts have special characteristics. Stretchable parts, such as pipe and duct, when placed in a drawing, will stretch until each end is

stopped by a part face or end of segment. They will also be stopped by a bend or corner.

Bendable parts, like tubing, act like stretchable parts, with the difference that they can go around bends and corners.

Transitional parts, that bridge the gap between two dissimilar ends, such as a round and square run, or different sized pathways. After you place the part you must click to indicate how far it should stretch. You must add the keyword PlaceAndStretch to your catalog for this function to work. See also Creating a Catalog and Catalog Keywords and Values.

Some parts, such as pipe supports and HVAC stiffeners, have "holes" in them through which stretchable and bendable parts can pass.

Detecting Clash in Parts Placement

This task shows how you can detect clashes between parts when you are moving parts in a document.

This function only works when you are placing/moving parts in free space. It will not work if the parts have been placed on a run, for instance. Three modes are available: Clash Detection Off; Clash Detection On, and Clash Detection Stop.

1.

To turn clash detection off click the Clash Detection (off) button . This is the default mode.

2.

To turn clash detection on click the Clash Detection (On) button . When you move a part in such a way that it interferes with another part, a red outline will display, as in the images below. (If your part displays red highlights and you want to change the color you can do so by clicking Tools-Options-Display and selecting another color.)

3.

To change to the stop mode click the Clash Detection (Stop) button . When this mode is on you will not be able to move a part to a position in which it interferes with another part. In the first image below the pump has been stopped because it interferes with the heat exchanger. However, when the user moves his pointer to the other side, and there is enough room for the pump, the pump will appear on the other side of the exchanger.

Placing Resources on Different Planes

This task shows you how to place catalog resources on different planes in an area.

You can select a plane on which to place a resource by clicking on it. This procedure shows you how to use the compass base to define a plane, such as a structure in your area, on which to place a resource.

1. Drag the compass to the plane on which you want to place a resource, such as a table top. The resource will align itself to the Z-axis of the compass: if the Z-axis is pointing straight up the resource will do so too.

2. Drag a resource from the catalog to your selected location.

3. When you are done, reset the compass by dragging it to the axis.If you drag a resource onto the area, and the mouse pointer is over an item reservation, then the resource becomes a child of the item reservation.

Creating a Parent-Child Relationship

This task shows you how to create a parent-child relationship between two elements. This function can be used to create a relationship between resources, between a resource and an element like an area; or between products in a process. The example below uses electrical parts and robots. The procedure is the same for all types of objects and elements.1.

Click the Attach button .

2. Select the parent (or master) element.

3. Select the child (or slave) element. The attachment is created. If you move the child, the connection between the two will remain; however, unlike a master-slave relationship, the child element will not snap back to its original position. If you move the parent the child will follow.

4. To hide all the Parent/Child symbols and text (attachments) in a product, click the Hide Attachment button, then click the Product in the specifications tree. All attachments in the product will disappear.

To hide individual attachments, click the Hide Attachment button, then click the object. The attachment will be hidden.

If a local Attachment is selected, e.g., an attachment between two elements in a product, only that attachment is hidden or shown.

If a Product is selected you not only Hide/Show all attachments of the selected product but also all attachments to the children of the selected product.

If you open a product and don't know if there are existing attachments, click the Swap Visible Space

button to reveal any attachments that may have been hidden. 5. To show all previously hidden attachments, click the Show Attachment button, then click the Product

in the specifications tree. All attachments will be shown. To show a previously hidden "local" attachment, click the Show Attachment button, then click the object or select it in the specification tree. The attachment will be shown.

6. To delete an attachment select it and use the delete key.

Rotate Resource Using the Definition Dialog Box

This task shows you how to rotate a catalog resource by entering into the definition dialog box the number of degrees that you want it to rotate on its vertical axis..

1. Click on the resource.

2. Click Edit-Definition in the menu bar. This displays the Product Definition dialog box. (You can also press Cntrl-Enter to display the box.)

3. Enter the degrees in the Rotation field.4. Click Apply and the resource will rotate on its vertical axis.

Snap Resources Together

This task shows you how to snap two resources together.

Resources can be joined at existing connectors, you can create new connectors to join them, or you can snap them together without using connectors. All procedures are described below, beginning with the procedure for snapping resources in which you create connectors.

1. To snap resources together by creating new connectors, click the Snap button .

2. Click one of the resources you want to snap together. The resource changes color and the Define Reference Plane (From) dialog box displays.

By default the Define Plane button is selected, allowing you to select a plane for the connector you will create.

See Creating Connectors for information about using the Define Plane functions.

The two resources will have a Master-Slave relationship to each other - but only if you choose to add a constraint (see below). If you add a constraint the first object you select becomes the slave, and the second object becomes the master.

Also note that the first resource you select will move to snap - the second resource you select remains stationary.3. Select the second resource. The Define Reference Plane (To) box will display - make your selections

as explained above. You can also select an existing connector. Click OK when done. The two resources will snap together and the Constraint Options dialog box will display.

4. You can clear the Align, Face and Orientation check boxes and click OK if you want the two resources to remain snapped together without any new connectors being created.

To add one or more constraints - which will also result in creating connectors - follow the steps given below.

5. Make your selections in the Snap Options box.

Align: You can increase distance between the two resources, but if you change the alignment the

slave will snap back to the original alignment. In the image below the distance is increased but the alignment remains the same.

Face: The two resources will maintain the face if you move one of them. In the image below the two maintain the same face, though the alignment has changed.

Orientation: The two connectors will maintain the same orientation if you move them, i.e. the red arrows visible in the connectors will align. It is therefore important to make sure that the red arrows in the connectors are pointed correctly and oriented correctly with reference to the part. The red arrow is usually set to the "Up" position of the resource, which means that on both resources they should point in the Up direction. If the red arrow points "down" in one resource and "up" in the other, then the resources will snap together incorrectly. You can toggle the position of the red arrow by clicking on the green arrow that is parallel to the plane.

Fix in space: If you select this option the position of the master resource is fixed - if it is moved it will snap back to its original position.

Attach: Checking this option allows you to attach the two objects.

Place manipulator at snapped location: Check this if you want to rotate the snapped object after placing it. The manipulator is placed on the object if you check this. You can then click on the bottom curve of the manipulator (see image below) and rotate the object. It will rotate in increments, based on the value entered in the Snap Angle field. In the image above it is 45 degrees.

http://pc220dsa/MARCXR16/doc/online/ucfug_C2/ucfugbt1712.htm

To remove a constraint select it in the specifications tree and delete it. To remove the 'Fix in space' option right click on the Fix line in the specifications tree, click Properties, go to the Constraints tab, and uncheck the Fix in space box.6. Click OK when done.

7. To snap resources together using preexisting connectors:

a. Click the Snap button.b. Move the pointer over the first resource - the connectors will display. Select the connector.c. Move the pointer over the second resource - the connectors will display. Select the connector

and the two resources will snap together.d. The Snap Options box will display. Make your selections and click OK.

Snap and Rotate a Resource This task shows you how to rotate a resource after snapping it to another resource.

1. With both resources on the screen, click on the Snap button and then on a resource. The orientation symbol will appear.

2. Click on the second resource. A white square will appear. Move the pointer over the resource and click when the white square is at the location where you want to snap the two resources. The orientation symbol will appear at the location and the Define Reference Plane dialog box will display.

3.Click on the Define plane using compass button . The compass will be placed at the location where you want to snap the two resources.

4. Click OK on the Define Reference Plane box. The two resources will snap together.

5.

Click on the Select button to exit the Snap command. Click on the resource you want to rotate, then grab one of the handles on the compass with your pointer and move it. Different handles will move/rotate the resource in different directions.

You can also double click on the compass to bring up the Compass Manipulation dialog box and enter the required figure in the Angle field. Click on the + or - sign next to the Z axis to rotate it.

Quick Snap ResourcesThis task shows you how to Quick Snap two resources together.

The Quick Snap procedure allows you to snap two resources together using one of three selection methods. You can select the snapping point on one of the resources using one of these methods. On the other resource the snapping point will either be its origin, or at a connector, as described in Step 2. The three selection methods are:

Center of three points (on a circle): the snapping will be the center of three points indicated by you.

Center of polygon: the snapping point will be the center of any surface indicated by you.

Surface: the snapping point is at any point indicated by you.

The three methods are described below.

1.

To snap resources together using the center of three points on a circle method, click the Snap Three

Points button .

2. Click the resource that you want to move. Note: If you click the resource at a connector it will snap to the other resource at that connector. You

can create a connector if you want to.

If you click the resource at a point other than a connector it will join to the other resource at its origin.

If the resource was preselected when you clicked the snap command you will not be able to select a connector.

These points apply to all three methods of Quick Snap.

In the image below the user wants the paint gun to snap to the robot arm. After he clicks the paint gun the compass displays at the origin of the paint gun to show that the part will snap at that location.

You can choose not to display the compass at the snap location by unchecking the option Place compass at snapping point in the Snap Options dialog box. The box displays when you click on any of the Quick Snap buttons. Placing the compass at the snapping location allows you to rotate the resource after it has snapped.

3. Define the point on the robot where you want the paint gun to snap, in this case the end of the robot arm, by clicking on three points. You can only select your defining points on the edges of a circle. Only points on the ends of edges are selectable. Note:

If you click the three points clockwise the paint gun will attach "inward" as shown in the image below:

If you click counter clockwise then the paint gun will attach "outward", which is the correct position in this example.

4.To Quick Snap using the center of polygon method, click the Snap Center of Polygon button and perform the action detailed in Step 2.

5. Select the snapping point on the second resource by clicking on a surface. The resource will be placed in the center of the polygon.

6.To Quick Snap using the surface method, click the Snap Surface button and perform the action detailed in Step 2.

7. Select the snapping point on the second resource by clicking on any surface. The resource will be placed at the point you click.

If you double click a command you will be in repeat mode. This allows you to snap a resource to a different location, using a different selection method if you want.

Using Quick Translate to Move Objects

This task shows you how to use the Quick Translate command to move objects.

This function allows the user to translate an object relative to a From point (on itself) to a To point. You can move an object:

Point-to-Point. The From object point matches the point on the To object.

Point-to-Line. The From object point is the orthogonal projection of the point on the To object line.

Point-to-Plane. The From object point is the orthogonal projection of the point on the To object plane.

Plane-to-Plane. The From object plane matches the plane on the To object. The two planes must be parallel.

Plane-to-Point. The new From object point is the orthogonal projection of the To point object on the From object plane.

Line-to-Point. The new From object point is the orthogonal projection of the To object point on the From object line. The new From object point matches the point on the To object.

Connector-to-Connector

An object moved using this command does not rotate.

If translating parts on a run, the part must not be connected to a stretchable part like a pipe or a bendable.

1.

With your document open, click the Quick Translate button . The Translate dialog box displays.

2. Click a From element button to translate objects.

When you click the Point button, you can select Point, Line, or Plane as the To element.

When you click the Line button, you can select only Point as the To Element. (The other To Element buttons are not active.)

When you click the Plane button, you can select Point or Plane as the To Element. (The other To Element buttons are not active.)

After clicking a From element button, select the From object in your document.

Click the appropriate To element button, then select the To object in your document.

The selected From object moves to the To object.

3. The Translate dialog box allows you to translate an object Connector-to-Connector.

Click the From element Connector button .

Distance and Offset fields display in the Translate dialog box.

Select the From object connector in your document.

You can change the value in the Distance field. The value you enter is the Distance the From object will move in the compass Z direction.

You can add an offset value in the Offset field. This value represents the distance between the two objects after a move.

Click the To element Connector button.

Select the To object connector in your document and click OK.

The From object moves to the To object based on the selected Distance and Offset. 4. You can use the Quick Translate command with only one object.

Click the From element Connector button .

Select the From object connector in your document.

If necessary, change the value in the Distance field.

Click the To element Connector button and click OK.

The From object moves in the compass Z direction.

The following shows how to translate Plane-to-Plane:

After clicking the From Element Plane button , select a plane on the From object in your document.

Now click the To Element Plane button and select a plane on the To object in your document.

The From object moves to the To object and the two planes are parallel.

The following shows how to translate Connector-to-Connector:

After clicking the From element Connector button , select the Connector on the From object in your document.

Click the To element Connector button and select the To object Connector.

The blue line extending from the compass indicates the direction and distance the From object will move. (You can change the distance and the offset and the blue line will adjust accordingly.) Click OK.

The From object moves the distance indicated in the Distance and Offset fields.

Creating a Path Reservation

The basic methods for creating path reservations are listed below.

Creating a Path ReservationRouting with Defined Nodes

Routing From the End of a RoutableBranching a Path Reservation

See also Advanced Tasks for Path Reservations.

Creating a Path Reservation

This task shows you how to create a path reservation on an area.

1. Make the appropriate area active.

See Making an Element Active.

2.

Select the Path Reservation button .

The Path Reservation dialog box displays.

3. Define the type of path reservation you want to create.

4. Define the routing mode for the path reservation:

Point-to-point

Orthogonal

Slope

Directional

Edgeline

Branch at Center: see Branching a Path Reservation

In addition, if you place the compass on an object the Use Compass Origin button will display. If you click the button and start to route the route will start from the compass origin. If you are in the middle of routing, the compass origin will serve as a routing point.

Click one of the Select Mode buttons - the default is No Filter. The Select Mode buttons allow you to define where you can start routing from.

No Filter: No filters are applied and you can route from any routable object or in space.

In Space: Routing will be in space. This is useful when you have a large object in the background, such as a ship structure, and you want to be able to route in space.

Only Part Connectors: Select this to be able to route from part or equipment connectors only.

Import Node Points: This allows you to route using predefined node points. See Routing with Defined Nodes for more information.

5. To define Section parameters, do the following:

a. Click the Section type button to define the section type of the run.

The Section dialog box is displayed.

b. Define the section type and the corresponding parameters for each of them:

No Section

Rectangular

Set Point

Envelope Height

Envelope width

Display

Nominal size

Circular

Set Point

Envelope diameter

Nominal size

Display

Flat Oval.

Set Point

Envelope Height

Envelope Width

Nominal size

Display

Radius Corner: Enter or select the:

Set Point

Envelope Height

Envelope Width

Radius Corner

Nominal size

Display

The Display buttons allow you to select a display mode of Line/Curve, Solid or Flat.

Click the Display Centerline button to show the centerline of the run. This will appear as a dashed yellow line. In addition, a blue line will appear to display the Set Point setting. This feature works in the Line/Curve, Solid and Flat display modes.

Instead of entering the type of path reservation, the set point and the height, width or diameter in the Section dialog box, you can select an existing path reservation in your document. Once you select the path reservation the Section dialog box will display the same values as the one you selected. To select, click on the Path Reservation button and then click the left mouse button once on the path reservation whose values you want as the default. Make sure the entire path reservation is selected, and not just one segment or node. It will be easier to select the path reservation in the specifications tree.

6. Select OK on the Section dialog box.7. Optional. Key in a value for the turn radius.

8. Click in the drawing to define the routing points.

9. Double-click the last point to stop routing.

10.Click on the Close Loop symbol that shows at the beginning of the routable if you want to create a closed loop routable. In a closed loop routable the ends of the routable are joined.

Routing with Defined Nodes

This task shows you how to route a run with predefined node points.

You can create a run by predefining the node points. This means you do not need to route the run by clicking the mouse pointer in the 3D window, as explained below. See Routing a Run for basic information.

1. Create a text file, using a text editor like Wordpad, with column headings as shown below, and define the node sequence, X/Y/Z coordinates and bend radius of the node points. A sample file is provided with this application to help you define the text file. The file name is RunInputNodeData.txt and the location is: ...intel_a\startup\EquipmentandSystems\MultiDiscipline\SampleData. The file is reproduced below to show you the column headings and layout. (It has been opened in Excel to make it easier to distinguish columns.

You can see that there are two sets of node numbers, ranging from 1 to 4. Whenever the application reads the node number 1 it will start a new run. So, based on the file above, two runs will be created.

2.

Open the Run dialog box and click the Import Node Points button . The File Selection dialog box displays. Navigate to the location of your file and select it. The runs will be created.

http://pc220dsa/MARCXR16/doc/online/ucfug_C2/ucfugbt1401.htm

Routing From the End of a Routable

This task explains how to route from the end of a path reservation, boundary, or run.

If you route an element with the same type and parameter values as the "source" element (i.e., the element from which the path reservation is routed), you can specify whether the new element you route is a continuation of the source element or a separate element. If you want to use the "Continue" option, be sure that the parent for the source element is active before you begin.

1

Select the Path Reservation button .

The Routing dialog box is displayed. 2. Define the routing parameters.

See Creating a Path Reservation on an Area for instructions.

3. Select the element from which you want to route. For path reservations, boundaries, and runs that are displayed with no section, select the filled

circle displayed when the cursor is at the end point of the line.

For path reservations, boundaries, and runs that are displayed with a section, base your selection on the "cues" that are displayed as you move the cursor over the element:

An outlined circle is displayed when your cursor is over the end point of the section's centerline.

A filled circle is displayed when the cursor is over the end point of the support line (defined by the set point of the section).

If you want to route the path reservation, boundary, or run as a continuation of the existing element, you must select the solid circle (i.e., the support line endpoint).

If the new element you route has the same type and parameter values as the element you selected, these options are added to the Routing Dialog box:

Continue Routing

Create New Route

4. Select the appropriate Continue option.

5. Click in the drawing to define the routing points.

6. Double-click the last point to stop routing.

Branching a Path Reservation

This task explains how to branch a path reservation from any of these elements: Another path reservation

Boundary

Contour

Run

If the "source" element (i.e., the element from which the path reservation branches) is moved or resized, the path reservation is adjusted accordingly.1.

Select the Path Reservation button

The Path Reservation dialog box is displayed.2. Define the parameters for the path reservation.

See Creating a Path Reservation on an Area for instructions.

3. Select the element from which you want to route the path reservation and begin routing. For a contour, select the edge.

For path reservations, boundaries, and runs that are displayed with a section, base your selection on the "cues" that are displayed as you move the cursor over the element:

A dashed line is displayed when your cursor is over the center of a section.

A solid line is displayed when the cursor is over the support line (defined by the set point of the section).

4.

If you want to branch from the center of the segment, click the Branch at Center button in the Path Reservation dialog box. The branch will begin from the center of the segment, irrespective of the point in the segment that you route from.

If you want to create a path reservation that "branches" from the end of a path reservation, boundary, or run, see Routing From the End of a Path Reservation, Boundary, or Run.

Using RoutablesWays of modifying routables, or creating routables using special techniques, are given here.

Using the Definition Dialog BoxPositioning a Branch

Routing Using the Compass Base PlaneConnecting Routables

Disconnecting RoutablesCreate a Closed Loop Run

Open a Closed RunChanging a Section

Changing the Angle of a SegmentMoving Nodes

Display Information About RoutablesFit Segment for Parts Assembly

Position Segment Relative to a PlaneTransfer Run to Another Document

Using the Definition Dialog Box

This task gives you an overview of the definition dialog box. You can make modifications to a routable using the functions contained in this box. Specific task-oriented modifications are explained elsewhere in this section.You should be familiar with the concepts explained in Routing a Run to be able to take full advantage of these functions. Note that some applications, like Systems Routing, do not utilize design rules and the no-rule conditions apply to them.

1. Right click on a routable and, in the drop down menus that display, select the routable (in this case Run-0049 object) and then Definition.

2. This brings up the Definition dialog box.

3. The Name field allows you to change the routable's instance name.4. The Section button lets you change section parameters, as explained in Routing a Run.

5. Click one of the Turn Type buttons if you want to change the turn type. No Turn: The turn radius for all turns is changed to 0. The Turn Radius field is not displayed.

Uniform Turn: All turns in the run have the same turn radius.

Mixed Turn: Turns in the run can have different turn radius.

6.

The Press to Use Rule button indicates if you are using the design rules. In the image above it is on, which is why the Turn Radius and Minimum Length fields are grayed out. You can click the button to go to a no-rule state, in which case the Turn Radius and Minimum Length fields will no longer be grayed out. See Routing a Run for more information.

http://pc220dsa/MARCXR16/doc/online/ucfug_C2/ucfugbt1401.htmhttp://pc220dsa/MARCXR16/doc/online/ucfug_C2/ucfugbt1401.htmhttp://pc220dsa/MARCXR16/doc/online/ucfug_C2/ucfugbt1401.htm

7.

The Display Error Report button is green when there is no error in the run. It turns red when you insert a value or make some other change to cause an error. Click the button to display a report. This error function checks to make sure that the turn radius and minimum length conform to the design rule.

8. The Turn Radius field displays the turn radius. To change it you need to display the Node Definition dialog box (see Moving Nodes) and enter a value. If you introduce an invalid turn radius, by entering a value in the Node Definition dialog box, then the Display Error Report button will turn red. (You can also introduce a turn radius error by shortening the length of one or both segments.) A red arc will also display on your run. The ends of the arc are the minimum point to which each segment should be routed for a valid turn. In the example below, the segment is not long enough to support the turn radius value entered by the user.

9. The Node Edit Table button displays a table containing node values - see Moving Nodes.

10. The Minimum Length field displays the minimum length of each segment. You cannot change the value in this field if you are using design rules. 11. The Total Length field displays the total length of the run. You cannot change the value in this field.

Positioning a Branch

This task shows you how to position a branch routable precisely. . . . .

This function allows you to use the Offset Plane feature to position the Branch at a precise point along the support or center line of the Main. In the illustration below the branch path reservation will be placed in the center. A branch is also referred to as the Slave Connector, and the routable of which it is a branch termed a Master Connector.The two routables must be connected for the function to work.

1. Select the Main routable and click the Offset Plane button. The Main will display nodes at the beginnings and ends of segments and a square (section detail) in the center of segments.

2. Move the mouse pointer to the Main Routable - a white square shows. Snap the white offset plane square to any of the nodes or section detail squares and click the left mouse button. A blue square will appear. See Using Offset Planes for more information.

3. Click the right mouse button on the Branch. In the menu that displays, select the line that corresponds to the Branch element, in this case path reservation2 object, then click Definition in the pop-up menu. This displays the Definition dialog box.

4. Click and drag the support line toward the blue square. A label will display the distance. Release the button when it reads 0 ft and click OK on the Definition dialog box. The Branch path reservation will assume the new position.

To place a routable at a precise distance from an end or a node, snap the offset plane to that node or

end. Then enter the distance in the step input box. Follow the steps above to move the Branch and click OK on the Definition dialog box when the required distance is reached.

Routing Using the Compass Base Plane

This task shows you how to use the compass to define the plane on which you are routing.

This feature allows you to place the compass base on a plane and route on that plane.

1. Drag the compass and place it on the surface on which you want to route. In the illustration below it is one face of an item reservation and you will place a path reservation on it.

2.

Click the Path Reservation button and do your routing on the surface. Double-click to end. The path reservation is created.

You can route on any plane on which the compass base can be placed. But you will not be able to route on any surface. You cannot route on the surface of other routables. If you need to route on the surface of a routable then you need to employ free space routing. After you place the compass base on the plane, you can route anywhere in your window and you will be routing on the same plane as the compass base. The illustrations below show one type of free space routing, in which you:

Create a boundary and place the compass on a plane.

Hide the boundary.

Route a path reservation.

Show the boundary again with the path reservation on the compass base plane.

The last illustration below is a top view showing the path reservation and compass base on the same plane.

Connecting Routables

This task shows you how to connect a routable, such as run or path reservation. A run is used as an example here.

You can use this function to connect two runs, connect a run to a part or connect to a hole connector.

1. Click the Connect Run button and then select one of the elements you want to connect. The element you select first will be the slave element and will be the one that moves to join the master element. You must click on one of the green connection indicators on the slave run, as shown in the illustration below.

2. Select the master element. The first run will move to connect to the master run and the connection symbol will display.

The slave run will connect to the master at the green connection indicator that you select. You can select any point on the master run for the slave to connect to. If you select a point in the middle of the master run then you may have to move the two near to each other to create the connection. The images below show connections in the middle and at the end.

You can also connect a run to a part using the method described above. If the part does not have a connector then you must create one.3. You do not need to select the green connector indicator to connect a run to a hole connector. You

can click on a segment of the run instead. In the image below the user first selected the run segment and then the hole connector on the clamp to place the run through it.

Disconnecting Routables

This task shows you how to dis